AtomID04G
Indoor Customer Premise Equipment Datasheet
HIGHLIGHTS
NOTE: Features can vary based on model or region.
• Supports 2G/3G/4G Bands
• Supports LTE FDD and TDD Bands
1/2/3/4/5/7/8/20/28/34/38/39/40/41/42/43
/48/66
– Customization can be requested:
o Email [email protected] for North
America.
o Email [email protected] for all other
regions.
• Complies with 3GPP Release 9 CAT4
standards
• 100 Mbps Ethernet interface
• Peak data rate of up to DL 100 Mbps,
UL 50 Mbps
• 64 QAM for DL and 16 QAM for UL as the
highest order modulation formats
• GUI-based local and remote Web
management
• Excellent Non-Line-of-Sight (NLOS) coverage
• Supports TR-069 network management
protocol
INTRODUCTION • Cell lock, SIM lock, and pin lock
The Baicells AtomID04G Indoor Customer Premise
• User-friendly LED status indicators
Equipment (CPE) brings broadband data services to
• Transparent Bridge Mode* (L2 Support)
end-users. It has an embedded Wi-Fi Access Point (AP)
and supports 2G, 3G, and 4G networks. * Planned for future release.
Wireless and wired devices, including mobile phones,
laptops, tablets, and other smart devices, can
simultaneously access the CPE.
The product comes with a standard one-year warranty;
an extended warranty is available.
AtomID04G Indoor CPE Datasheet | www.baicells.com | +1 (888) 502-5585 | Version 2.01 | 17-Feb-2022
AtomID04G
Indoor Customer Premise Equipment Datasheet
TECHNOLOGY
LTE Standard 3GPP Release 9, CAT4
LTE Mode TDD/FDD
Channel Bandwidth 5/10/15/20 MHz
• 2G Mode:
B2 (UL: 1850 MHz–1910 MHz, DL: 1930 MHz–1990 MHz)
B3 (UL: 1710 MHz–1785 MHz, DL: 1805 MHz–1880 MHz)
B5 (UL: 824 MHz–849 MHz, DL: 869 MHz–894 MHz)
B8 (UL: 880 MHz–915 MHz, DL: 925 MHz–960 MHz)
• 3G WCDMA Mode:
B1 (UL: 1920 MHz–1980 MHz, DL: 2110 MHz–2170 MHz)
B2 (UL: 1850 MHz–1910 MHz, DL: 1930 MHz–1990 MHz)
B4 (UL: 1710 MHz–1755 MHz, DL: 2110 MHz–2155 MHz)
B5 (UL: 824 MHz–849 MHz, DL: 869 MHz–894 MHz)
B8 (UL: 880 MHz–915 MHz, DL: 925 MHz–960 MHz)
• LTE FDD Mode:
B1 (UL: 1920 MHz–1980 MHz, DL: 2110 MHz–2170 MHz)
B2 (UL: 1850 MHz–1910 MHz, DL: 1930 MHz–1990 MHz)
B3 (UL: 1710 MHz–1785 MHz, DL: 1805 MHz–1880 MHz)
Frequency Bands B4 (UL: 1710 MHz–1755 MHz, DL: 2110 MHz–2155 MHz)
B5 (UL: 824 MHz–849 MHz, DL: 869 MHz–894 MHz)
B7 (UL: 2500 MHz–2570 MHz, DL: 2620 MHz–2690 MHz)
B8 (UL: 880 MHz–915 MHz, DL: 925 MHz–960 MHz)
B20 (UL: 832 MHz–862 MHz, DL: 791 MHz–821 MHz)
B28 (UL: 703 MHz–748 MHz, DL: 758 MHz–803 MHz)
B66 (UL: 1710 MHz–1780 MHz, DL: 2110 MHz–2200 MHz)
• LTE TDD Mode:
B34 (2010 MHz–2025 MHz)
B38 (2570 MHz–2620 MHz)
B39 (1880 MHz–1920 MHz)
B40 (2300 MHz–2400 MHz)
B41 (2496 MHz–2690 MHz)
B42 (3400 MHz–3600 MHz)
B43 (3600 MHz–3800 MHz)
B48 (3550 MHz–3700 MHz)
Multiplexing DL 2x2 MIMO
Security Firewall: IP/MAC/URL filter; ACL rule
AtomID04G Indoor CPE Datasheet | www.baicells.com | +1 (888) 502-5585 | Version 2.01 | 17-Feb-2022
AtomID04G
Indoor Customer Premise Equipment Datasheet
INTERFACE
Ethernet Interface 1 RJ-45 port 10/100 auto-sensing, auto-MDX
IPv4/IPv6, UDP, TCP, IP, ICMP, SNMPv2c, SNMPv3c, HTTPS, SSH, TELNET, TR-069,
Protocols Used
CBSD
Network Management Web GUI, ACS, OMC, SNMP
VLAN 802.1Q
PERFORMANCE
Peak Rate 20 MHz DL (2x2 MIMO, 64 QAM) UL (16 QAM)
FDD 100 Mbps 50 Mbps
TDD UL/DL Config. 1 80 Mbps 20 Mbps
TDD UL/DL Config. 2 100 Mbps 10 Mbps
Modulation: DL: QPSK, 16 QAM, 64 QAM
UL: QPSK, 16 QAM
Receive Sensitivity: <-94 dBm at QPSK, 20 MHz, 25°C
MODULATION LEVELS (TDD UL/DL CONFIG 2)
DL MCS DL Modulation CQI Index Theoretical Data Rate
0–9 QPSK 1–6 3 Mbps–21 Mbps
10–16 16 QAM 7–9 21 Mbps–41 Mbps
17–28 64 QAM 10–15 41 Mbps–100 Mbps
UL MCS UL Modulation Theoretical Data Rate
0–10 QPSK 0.5 Mbps–3.5 Mbps
11–20 16 QAM 3.5 Mbps–10 Mbps
FEATURES
Network Mode NAT or Bridge
SIM PIN management, SIM lock
Network Connection Auto or manual
LTE Scan Mode Full band scan or frequency lock
WLAN MSSID isolation, VLAN
VPN L2TP L2/L3, GRE L2/L3, PPTP, L2 VxLAN, OpenVPN
NAT Port forwarding, port trigger, DMZ, ALG
Diagnostics Ping, TraceRoute
LTE status; connection/system up time; device status; DHCP client list; Wi-Fi
Statistics
station list; firewall status
Date and time setting; reboot; restore factory settings; restore or back up
Maintenance
configuration file; firmware upgrade locally or OTA
AtomID04G Indoor CPE Datasheet | www.baicells.com | +1 (888) 502-5585 | Version 2.01 | 17-Feb-2022
AtomID04G
Indoor Customer Premise Equipment Datasheet
LINK BUDGET
Antenna Type Internal omni, 1T2R
M11: 6.5 dBi
Antenna Gain S40/M1: 5 dBi
W: 1 dBi to 5 dBi
Max Transmit Power 23 dBm
M11: 29.5 dBm
Maximum EIRP S40/M1: 28 dBm
W: 24 dBm to 28 dBm
WLAN
Standard IEEE 802.11b/g/n
Channel Bandwidth 20 MHz, 40 MHz
Frequency 2.4 GHz
MIMO 2x2
Peak Rate 802.11n: 300 Mbps
Modulation DSSS/CCK, OFDM
-64 dBm at 65 Mbps, typical for 802.11n
Sensitivity -65 dBm at 54 Mbps, typical for 802.11g
-76 dBm at 11 Mbps, typical for 802.11b
Max Output Power 14 ± 3 dBm
Antenna Type External omni, 2T2R
Antenna Gain 5 dBi
Active Users 32
PHYSICAL
LED Indicators Power, WLAN, LTE, LTE Signal
USIM 1.8 V/3 V 2FF
Restore Button Press for ten seconds to restore the CPE to its factory settings
Power Switch On/off
• Operating Temperature: 14°F to 113°F /-10°C to 45°C
Temperature
• Storage Temperature: -4°F to 158°F / -20°C to 70°C
Humidity 5% to 95% RH
Power Consumption <5 W
With DC Adaptor:
Power Supply • INPUT: 100 VAC to 240 VAC
• OUTPUT: 12 VDC 0.5 A/5 VDC 1 A
Weight About 11.9 oz/337 g
7.5 x 6.4 x 2.8 inches
Dimensions
191 x 163 x 72 millimeters
AtomID04G Indoor CPE Datasheet | www.baicells.com | +1 (888) 502-5585 | Version 2.01 | 17-Feb-2022
AtomID04G
Indoor Customer Premise Equipment Datasheet
GLOBAL PART NUMBERS
Atom Indoor CAT4, 1T2R, 1 dBi to 5 dBi, B1/2/3/5/7/8/28/38/39/40/41, internal
EG2030C-W 699 MHz–2700 MHz omni directional antenna, 1 FE CPE
• CE Certification: JYTS297-EU
Atom Indoor CAT4, 1T2R, 5 dBi, B40, internal 2300 MHz–2700 MHz omni
EG2030C-S40
directional antenna, 1 FE CPE
Atom Indoor CAT4, 1T2R, 5 dBi, B40/41, internal 2300 MHz–2700 MHz omni
directional antenna, 1 FE CPE
EG2030C-M1
• FCC Certification: 2AG32EG2030CM1 (2496 MHz–2690 MHz)
• IC Certification: 20982-EG2030CM1 (2570 MHz–2620 MHz)
Atom Indoor CAT4, 1T2R, 6.5 dBi, B42/43/48, internal 3400 MHz–3800 MHz
omni directional antenna, 1 FE CPE
EG2030C-M11
• FCC Certification: 2AG32EG2030CM11 (3550 MHz–3700 MHz)
• IC Certification: 20982-EG2030CM11 (3450 MHz–3700 MHz)
NOTE: Customized versions can be requested.
ANTENNA PATTERN
EG2030C-W
H-Pattern V-Pattern
EG2030C-M1
EG2030C-S40
H-Pattern V-Pattern
AtomID04G Indoor CPE Datasheet | www.baicells.com | +1 (888) 502-5585 | Version 2.01 | 17-Feb-2022
AtomID04G
Indoor Customer Premise Equipment Datasheet
EG2030C-M11
H-Pattern V-Pattern
AtomID04G Indoor CPE Datasheet | www.baicells.com | +1 (888) 502-5585 | Version 2.01 | 17-Feb-2022
