BOQ FOR PERCENTAGE RATE QUOTATION

BIIL OF QUANTITY (BOQ)

NAME OF THE WORK Repair and maintenance of Qtr No.07 & 04 of block 13 of
CISF colony under G.M. unit Piparwar Area.
NIQ NO. & DATE NIQ.No.53…of 2020-2021 vide Letter
Ref.No.G.M.(PPR/(CIVIL)/NIQ/2020-2021/ 3815-29
Date.07.09..2020
INPUT TAX AVAILABL E / NOT AVAILABLE TO BE MENTIONED BY DEPARTMENT
RATE OF GST (in%) 18%
STATUS OF BIDDER W.R.T. GST [PLEASE MARK (√) (a) GST REGISTERED BIDDER UNDER
REGULAR SCHEME
AS APPLICABLE]
(b) GST REGISTERED BIDDER UNDER
COMPOSITION SCHEME
(c) GST UNREGISTERED BIDDER

Rate/Unit in
Sl. No. Description Qty Unit Amount in Rs.
Rs.
1 DISMANTLING DOORS, WINDOWS AND CLERESTORY 5 Nos. 141.25 706.25
WINDOWS (STEEL OR WOOD) SHUTTER INCLUDING
CHOWKHATS, ARCHITRAVE, HOLDFASTS ETC.
COMPLETE AND STACKING WITHIN 50 METRES LEAD : OF
AREA 3 SQ. METRES AND BELOW
2 CEMENT CONCRETE FLOORING 1:2:4 (1 CEMENT : 2 81.50 Sq.m 353.35 28798.02
COARSE SAND : 4 GRADED STONE AGGREGATE)
FINISHED WITH A FLOATING COAT OF NEAT CEMENT,
INCLUDING CEMENT SLURRY, BUT EXCLUDING THE
COST OF NOSING OF STEPS ETC. COMPLETE. 40 MM
THICK WITH 20 MM NOMINAL SIZE STONE AGGREGATE
3 PROVIDING AND FIXING FACTORY MADE UPVC DOOR 20.00 Sq.m 422.85 8457.00
FRAME, MADE OF UPVC EXTURDED SECTIONS , OF SIZE
65 MM X 55 MM WITH WALL THICKNESS 2.0 MM (± 0.2 MM)
, CORNERS OF THE DOOR FRAME TO BE MITRED CUT
AND JOINTED WITH PLASTIC BRACKETS AND STAINLESS
STEEL SCREWS, REINFORCING HINGE SIDE VERTICAL OF
THE FRAMES WITH PVC PROFILE OF SIZE 28 MM X 30 MM
HAVING WALL THICKNESS 2 MM (±0.2 MM), INCLUDING
PROVIDING & FIXING 3 NOS OF 125 MM LONG STAINLESS
STEEL HINGES TO THE FRAME, FIXING THE FRAME WITH
JAMB WITH REQUIRED NUMBER & SIZE OF ANCHOR
DASH FASTNERS, ALL COMPLETE AS PER
MANUFACTURER’S SPECIFICATION AND DIRECTION OF
ENGINEER-IN-CHARGE.
4 PROVIDING AND FIXING ISI MARKED FLUSH DOOR 2.00 Sq.m 1735.35 3470.70
SHUTTERS CONFORMING TO IS : 2202 (PART I) NON-
DECORATIVE TYPE, CORE OF BLOCK BOARD
CONSTRUCTION WITH FRAME OF 1ST CLASS HARD
WOOD AND WELL MATCHED COMMERCIAL 3 PLY
VENEERING WITH VERTICAL GRAINS OR CROSS BANDS
AND FACE VENEERS ON BOTH FACES OF SHUTTERS: 30
MM THICK INCLUDING ISI MARKED STAINLESS STEEL
BUTT HINGES WITH NECESSARY SCREWS
5 PROVIDING AND FIXING STAINLESS STEEL A ISI 304 (18/8) 2 Nos. 3989.20 7978.40
KITCHEN SINK AS PER IS: 13983 WITH C.I. BRACKETS AND
STAINLESS STEEL PLUG 40 MM, INCLUDING PAINTING OF
FITTINGS AND BRACKETS, CUTTING AND MAKING GOOD
THE WALLS WHEREVER REQUIRED : 610X460 MM BOWL
DEPTH 200 MM
6 PROVIDING AND FIXING WASH BASIN WITH C.I. 2 Nos. 2010.35 4020.70
BRACKETS, 15 MM C.P. BRASS PILLAR TAPS, 32 MM C.P.
BRASS WASTE OF STANDARD PATTERN, INCLUDING
PAINTING OF FITTINGS AND BRACKETS, CUTTING AND
MAKING GOOD THE WALLS WHEREVER REQUIRE: WHITE
VITREOUS CHINA WASH BASIN SIZE 630X450 MM WITH A
SINGLE 15 MM C.P. BRASS PILLAR TAP
7 PROVIDING AND FIXING 37 MM THICK FACTORY MADE 5.36 Sq.m 2950.90 15816.82
PVC DOOR SHUTTER, STYLES AND RAILS MADE OF PVC
HOLLOW SECTION OF SIZE 100 MM X 37 MM WITH WALL
THICKNESS 2 MM ( ± 0.2 MM), WITH INBUILT BEAD ON
ONE SIDE, STYLES AND RAILS MITERED CUT AND JOINT
AT THE CORNERS BY MEANS OF 2 NOS OF PLASTIC
BRACKETS OF SIZE 75 MM X 220 MM AT EACH CORNER
AND STAINLESS STEEL SCREWS, REINFORCING THE
HINGE SIDE OF STYLE BY INSERTING PVC PROFILE OF
SIZE 28 MM X 30 MM, WITH WALL THICKNESS 2 MM ( ± 0.2
MM). LOCKRAIL OF SIZE 100 MM X 37 MM, WALL
THICKNESS 2 MM (+ 0.2 MM) WILL BE FIXED TO THE
VERTICAL STYLES. PROVIDING WITH PVC SNAPFIT
BEADS AND PANEL OF SIZE 100 MM X 20 MM, AND
INSERTING 2 NOS TIE BAR OF 6 MM DIA AND FASTENING
WITH NUTS AND WASHERS COMPLETE, ALL AS PER
MANUFACTURER’S SPECIFICATION AND DIRECTION OF
ENGINEER-IN-CHARGE.
8 PROVIDING AND LAYING CERAMIC GLAZED FLOOR TILES 5.47 Sq.m 785.40 4296.13
OF SIZE 300X300 MM (THICKNESS TO BE SPECIFIED BY
THE MANUFACTURER) OF 1ST QUALITY CONFORMING TO
IS : 15622 OF APPROVED MAKE IN COLOURS SUCH AS
WHITE, IVORY, GREY, FUME RED BROWN, LAID ON 20 MM
THICK CEMENT MORTAR 1:4 (1 CEMENT : 4 COARSE
SAND), INCLUDING POINTING THE JOINTS WITH WHITE
CEMENT AND MATCHING PIGMENT ETC, COMPLETE
09 PROVIDING AND FIXING IST QUALITY CERAMIC GLAZED 33.04 Sq.m 836.65 27642.91
WALL TILES CONFORMING TO IS: 15622 (THICKNESS TO
BE SPECIFIED BY THE MANUFACTURER), OF APPROVED
MAKE, IN ALL COLOURS, SHADES EXCEPT BURGUNDY,
BOTTLE GREEN, BLACK OF ANY SIZE AS APPROVED BY
ENGINEER-IN-CHARGE, IN SKIRTING, RISERS OF STEPS
AND DADOS, OVER 12 MM THICK BED OF CEMENT
MORTAR 1:3 (1 CEMENT : 3 COARSE SAND) AND JOINTING
WITH GREY CEMENT SLURRY @ 3.3KG PER SQM,
INCLUDING POINTING IN WHITE CEMENT MIXED WITH
PIGMENT OF MATCHING SHADE COMPLETE.
10 DISMANTLING G.I. PIPES (EXTERNAL WORK) INCLUDING 70.00 Sq.m 57.85 4049.50
EXCAVATION AND REFILLING TRENCHES AFTER TAKING
OUT THE PIPES, MANUALLY/ BY MECHANICAL MEANS
INCLUDING STACKING OF PIPES WITHIN 50 METRES
LEAD AS PER DIRECTION OF ENGINEER-IN-CHARGE :
15.44.1 15 MM TO 40 MM NOMINAL BORE
11 PROVIDING AND FIXING G.I. PIPES COMPLETE WITH G.I. 10.00 Sq.m 215.10 2151.00
FITTINGS AND CLAMPS, I/C CUTTING AND MAKING GOOD
 A THE WALLS ETC.
15 MM DIA NOMINAL BORE
B 25 MM DIA NOMINAL BORE 60.00 Sq.m 304.15 18249.00
12 DISTEMPERING WITH OIL BOUND WASHABLE DISTEMPER 442.70 Sq.m 32.00 14166.40
OF APPROVED BRAND AND MANUFACTURE TO GIVE AN
EVEN SHADE : OLD WORK (ONE OR MORE COATS)
13 REPAIRS TO PLASTER OF THICKNESS 12 MM TO 20 MM IN 50.00 Sq.m 259.15 12957.50
PATCHES OF AREA 2.5 SQ. METERS AND UNDER,
INCLUDING CUTTING THE PATCH IN PROPER SHAPE,
RAKING OUT JOINTS AND PREPARING AND PLASTERING
THE SURFACE OF THE WALLS COMPLETE, INCLUDING
DISPOSAL OF RUBBISH TO THE DUMPING GROUND
WITHIN 50 METRES LEAD : WITH CEMENT MORTAR 1:4
(1CEMENT: 4 COARSE SAND)
14 PAINTING WITH SYNTHETIC ENAMEL PAINT OF 51.88 Sq.m 48.50 2516.18
APPROVED BRAND AND MANUFACTURE OF REQUIRED
COLOUR TO GIVE AN EVEN SHADE :ONE OR MORE
COATS ON OLD WORK
15 PROVIDING AND FIXING P.V.C. WASTE PIPE FOR SINK OR 2 Nos. 76.75 153.50
WASH BASIN INCLUDING P.V.C. WASTE FITTINGS
COMPLETE.32 MM DIA
16 PROVIDING AND FIXING BRASS STOP COCK OF 2 Nos. 260.60 521.20
APPROVED QUALITY : 15 MM NOMINAL BORE

TOTAL 1,55,951.21

GST @ 18% 28,071.21

TOTAL ESTIMATEDCOST IN Rs. 1,84,022.42

Note: Bidders are requested to quote their rate in figure & words both

STAFF OFFICER
(CIVIL)
PIPARWAR AREA

I AGREE TO EXECUTE THE WORK at …………..%(in words …………….%) ABOVE/BELOW THE ESTIMATED COST.

SIGNATURE OF BIDDER