Extract of the

general catalogue,

CHAPTER D

INDIVIDUAL SOLUTIONS
FROM A SINGLE SOURCE
A large variety of products and systems for
warehouses, factories and workshops

G E N E R A L C ATA L O G U E
Pallet racking – a modular system
with unlimited applications
The latest pallet racking system from Longitudinal beam single location
SSI SCHAEFER is designed to be racking systems are especially
compatible with Euro and industrial suitable where the stored goods all
pallet dimensions. Whether for flat have the same base dimensions,
pallets, mesh box pallets or other but different heights. Drive-in racking
loading units – crosswise racking is the ideal storage solution if very
for single- or multi-location storage large quantities of the same product
systems permit considerable are to be stored.
flexibility for rapid goods handling.
Using the appropriate system com-
Whether in a wholesale warehouse
ponents, pallets and containers in
or in a spare parts store, in the
all different shapes and sizes can
electronics and machine engineering
be optimally stored.
industry or in automobile assembly
– longitudinal beam racking can be
applied in all these sectors.
 PALLET RACKING SYSTEMS

Longitudinal beam racking PR 350 Page D4

RACKING
PALLET
Longitudinal beam racking PR 600 Page D8

Front-to-back racking PR 600 Page D12

Accessories for pallet racking Page D16

Safety accessories Page D21

Identification of storage locations Page D24

Drive-in and drive-through racking Page D28

Mobile racking systems Page D30

Pallet live storage racking Page D32

High rise racking Page D34

D1
 PALLET RACKING SYSTEMS

Pallet racking overview

Longitudinal beam racking PR 350 Longitudinal beam racking PR 600

Applications Pallet storing suitable for medium to Pallet storing suitable for medium
high-volume products with medium to high to high-volume products with medium
loads, e. g. in manufacturing areas and for to high loads, e. g. for logistic centres
material provisioning or distribution warehouses

Advantages 왘Solid and robust construction 왘 Lightweight and economic construction

왘Simple assembly 왘 Stable due to its special design
with few components 왘 Dimensional stability

Design 왘Welded frames with longitudinal beams, 왘 Bolted frames with longitudinal beams,
3 upright profiles in 3 frame depths each, 4 upright profiles in 3 frame depths each,
10 frame heights, 2 beam types, 7 bay lengths 10 frame heights, 2 beam types, 7 bay lengths
Crosswise connection 왘Bolt-free system 왘 Bolt-free system
Perforation 왘50:50 mm 왘 50:50 mm
Upright widths 왘70, 80, 100 mm 왘 75, 90, 100, 120 mm
Frame load capacity 왘Up to 15000 kg 왘 Up to 30000 kg
Horizontal 왘Up to 4500 kg 왘 Up to 4500 kg
load capacity per pair per pair
Frame finish 왘Painted RAL 7037, grey 왘 Galvanised
Beam finish 왘Painted RAL 5010, gentian blue 왘Painted RAL 5010, gentian blue

from pages D4 D8

D2
 Pallet racking systems

Front-to-back racking PR 600

Pallet storing suitable for medium to high-
volume products with medium to high loads,
i Necessary safety requirements for racking
acc. to BRG 234 (formerly ZH 1/428)

e. g. spare parts warehousing 1.1 Frame height

at least 500 mm higher than the top beam
1.2 Drive-through areas
have to be covered (chipboard, mesh grating). The height
clearance has to be at least 2000 mm
왘 Lightweight and economic construction 1.3 Safety clearance
왘 Stable due to its special design with a safety clearance of less than 100 mm between the
pallets in a double sided row end stops are to be in place
왘 Dimensional stability 1.4 Frame top
왘 Easy to adjust for all free-standing frames, a corner protection must be
installed. This also applies to drive-through areas
1.5 Single bay
왘 Bolted frames with horizontal braces, if a single shelf unit is placed free-standing in the area and
3 frame depths, 10 frame heights, one side is not intended for loading or unloading, then a security
3 support types, 3 bay lengths device must be installed to prevent stored goods from falling
down, e.g. a rear mesh on this side
왘 Bolt-free system
1.6 Front-to-back stacking
왘 50:50 mm if using front-to-back stacking, the pallets or containers must
be secured, e.g. by front-to-back supports, chipboards or mesh
왘 75, 90, 100 mm panels. This does not apply to pallets with cross girders running
in depth direction
왘 Up to 15000 kg
1.7 Load signs
왘 Up to 1500 kg all racking installations are to be furnished with the relevant
per pair load signs
왘 Galvanised
왘Painted RAL 5010, gentian blue

i Technical regulations
for pallet racking

2.1 Racking row

one racking row must consist of at least 3 racking bays
2.2 Beam levels
at least 2 beam levels for each racking bay
2.3 Opening heights
the opening heights may not deviate any more than 200 mm
from each other. The maximum opening height is 2500 mm
2.4 Concrete floor requirements
the minimal quality of the concrete floor required: C20/25.
Concrete thickness 200 mm

D12

D3
 PALLET RACKING SYSTEMS

Pallet racking PR 350

Longitudinal beam racking is range of racking systems. The

suitable for universal use for all simple modular system has been
applications in the warehouse. tried and tested for over fifteen
Using the appropriate system years and has proven itself as
components, pallets and containers absolutely safe in practical use.
in all different shapes and sizes
Compatibility with other systems
can be located.
and a comprehensive range
The longitudinal beam racking of accessories enables ongoing
PR 350 demonstrates expansion of existing installations
SSI SCHAEFER’s commitment to SSI SCHAEFER provides a 10 year
continually updating its impressive after-purchase guarantee.

D4
 i GREY
Frame
GENTIAN BLUE
Longitudinal
Longitudinal beam racking PR 350
beams
RAL 7037 RAL 5010

왘 Highest load bearing capacity

frame load bearing capacity up to 15000 kg
(at least 2 beam pairs INP 100 per bay
and 5 bays per racking row), beam load Frames and longitudinal
bearing capacity 4500 kg per pair
왘 Compatible with SSI SCHAEFER beams PR 350
racking system PR 400
왘 Stable due to its special design
왘 High quality materials
왘 Perforation
hole pitch 50:50 mm
왘 Upright width P-profile
70, 80, 100 mm front-to-back support
왘 Simple assembly Page D18
with few components
P-profile
왘 Welded frames front-to-back support

왘 Large foot plate

왘 Sturdy construction
with material thickness up to 4 mm

Mesh panels
Page D22

Fork spacer

Frame
Page D6

Fork spacer
Page D18

Angle profile front-to-back

support with fixing angle

Angle profile front-

to-back support
Page D18

Steel panels on
beam profile INP
Page D19 Steel decking panels,
laid on top

Load sign
Page D23

Mesh panels on
Chipboard, laid on top beam profile INP Mesh panel, laid on top
Page D20 Page D19

Longitudinal
Corner protector beams
Page D21 Page D7 Corner protector Load sign Chipboard with edge
protectors, laid on top

D5
 PALLET RACKING SYSTEMS i
왘 Frame load bearing
capacity Ba
y lo
Frames the guaranteed frame load bearing
capacity depends on the compartment
ad

height and beam profile. The values

given relate to racks with at least two
pairs of evenly spaced beams per bay
and racking rows of at least five bays,

opening
Bottom

height
using INP 100 longitudinal beam Co
profiles. Different values are produced mp
. lo
depending on the horiztonal beam ad

Racking height
profile.

Please consult our specialists for

advice.

Cle
Opening height Frame load bearing capacity ar
ba
yw
ng
U 70 profile U 80 profile U 100 profile idt
h cki
Ra pth
1000 mm 5500 kg 10600 kg 12500 kg de

1250 mm 5200 kg 10000 kg 12000 kg

1500 mm 4600 kg 9600 kg 11800 kg
1750 mm 4000 kg 9300 kg 11600 kg
2000 mm 3650 kg 8000 kg 10000 kg
2250 mm 3300 kg 7200 kg 9000 kg
2500 mm 2900 kg 6000 kg 7500 kg

Catalogue dimensions
2200

2500

2700

3000

3300
3600

3800

4100

4400

4700

4900

5200

5500

5800

6000

6300

6600

6900

7100

7400

7700

8000

8200

8500

8800

9100

9300

9600

9900

10200

10400

10700

11000

11300

11500

11800

12100
Further standard dimensions

Item Frame Frame Order no. Item Frame Frame Order no. Item Frame Frame Order no.
height depth height depth height depth
(mm) (mm) (mm) (mm) (mm) (mm)

U 70 profile
RN 70258 2500 850 126030 RN 70251 2500 1050 126390 RN 70252 2500 1250 126750
RN 70308 3000 850 126090 RN 70301 3000 1050 126450 RN 70302 3000 1250 126810
RN 70368 3600 850 126150 RN 70361 3600 1050 126510 RN 70362 3600 1250 126870
RN 70418 4100 850 126210 RN 70411 4100 1050 126570 RN 70412 4100 1250 126930
RN 70478 4700 850 126270 RN 70471 4700 1050 126630 RN 70472 4700 1250 126990
RN 70528 5200 850 126330 RN 70521 5200 1050 126690 RN 70522 5200 1250 127050

U 80 profile
RN 80258 2500 850 126040 RN 80251 2500 1050 126400 RN 80252 2500 1250 126760
RN 80308 3000 850 126100 RN 80301 3000 1050 126460 RN 80302 3000 1250 126820
RN 80368 3600 850 126160 RN 80361 3600 1050 126520 RN 80362 3600 1250 126880
RN 80418 4100 850 126220 RN 80411 4100 1050 126580 RN 80412 4100 1250 126940
RN 80478 4700 850 126280 RN 80471 4700 1050 126640 RN 80472 4700 1250 127000
RN 80528 5200 850 126340 RN 80521 5200 1050 126700 RN 80522 5200 1250 127060
RN 80588 5800 850 127120 RN 80581 5800 1050 127480 RN 80582 5800 1250 127840
RN 80638 6300 850 127180 RN 80631 6300 1050 127540 RN 80632 6300 1250 127900
RN 80698 6900 850 127240 RN 80691 6900 1050 127600 RN 80692 6900 1250 127960
RN 80748 7400 850 127300 RN 80741 7400 1050 127660 RN 80742 7400 1250 128020

U 100 profile
RN 10368 3600 850 126170 RN 10361 3600 1050 126530 RN 10362 3600 1250 126890
RN 10418 4100 850 126230 RN 10411 4100 1050 126590 RN 10412 4100 1250 126950
RN 10478 4700 850 126290 RN 10471 4700 1050 126650 RN 10472 4700 1250 127010
RN 10528 5200 850 126350 RN 10521 5200 1050 126710 RN 10522 5200 1250 127070
RN 10588 5800 850 127130 RN 10581 5800 1050 127490 RN 10582 5800 1250 127850
RN 10638 6300 850 127190 RN 10631 6300 1050 127550 RN 10632 6300 1250 127910
RN 10698 6900 850 127250 RN 10691 6900 1050 127610 RN 10692 6900 1250 127970
RN 10748 7400 850 127310 RN 10741 7400 1050 127670 RN 10742 7400 1250 128030

D6
 GREY GENTIAN BLUE Longitudinal beam racking PR 350
Upright profiles Longitudinal beams
RAL 7037 RAL 5010

왘 Upright profiles 왘 System dimensions of longitudinal

U-section front-to-back supports. Welded with beam racks
horizontal and diagonal struts to form a stable
frame.
Storage front-to-back
Pallet dimensions Storage depth Rack depth Longitudinal beams
800 x 1200 mm 1200 mm 1050 mm
50:50 mm perforations. 1000 x 1200 mm 1200 mm 1050 mm
1200 x 1200 mm 1200 mm 1050 mm
Large footplates ensure even distribution of Storage side by side
load to floor. Pallet dimensions Storage depth Rack depth
800 x 1200 mm 800 mm 850 mm
왘 Longitudinal beams 1000 x 1200 mm 1000 mm 1050 mm
with welded 5-hook clips. Guarantee a positive
connection to the uprights.

Upright lug pitch 50:50 mm adjustable.

Supplied with 2 safety pins per unit (included)

to prevent the beam from being lifted out 1800 2700 3600
accidentally. 2200 3300
2700 3900

The loads given are calculated on uniformly

distributed load.

The order numbers refer to a beam. 2700 3900

2700 3900

Accessories for PR 350

i from page D17
Longitudinal INP beams
Item Load Profile Order no. Item Load Profile Order no. Item Load Profile Order no.
capacity/ type capacity/ type capacity/ type
pair (kg) pair (kg) pair (kg)

Length 1800 mm Length 2200 mm Length 2700 mm

TRN1-180-08-I 3000 INP 180 323560 TRN1-220-08-I 2500 INP 180 323600 TRN1-270-08-I 2100 INP 180 323650
TRN1-180-10-I 4500 INP 100 323720 TRN1-220-10-I 4200 INP 100 323760 TRN1-270-10-I 3500 INP 100 323810
TRN1-270-12-I 4500 INP 120 324030

Length 2900 mm Length 3300 mm

TRN1-290-08-I 1900 INP 180 323670 TRN1-330-08-I 1400 INP 180 323710
TRN1-290-10-I 3300 INP 100 323830 TRN1-330-10-I 2700 INP 100 323870
TRN1-290-12-I 4500 INP 120 324050 TRN1-330-12-I 4400 INP 120 324090

Length 3600 mm Length 3900 mm

TRN1-360-10-I 2300 INP 100 323900 TRN1-390-10-I 2000 INP 100 323930
TRN1-360-12-I 3900 INP 120 324120 TRN1-390-12-I 3400 INP 120 324150

Longitudinal CE beams
Item Load Profile Order no. Item Load Profile Order no. Item Load Profile Order no.
capacity/ type capacity/ type capacity/ type
pair (kg) pair (kg) pair (kg)

Length 1800 mm Length 2200 mm Length 2700 mm

TRN1-180-085-30 CE 3200 CE 180 324220 TRN1-220-085-30 CE 2500 CE 180 324230 TRN1-270-085-30 CE 1700 CE 180 324240
TRN1-180-105-30 CE 4200 CE 100 324260 TRN1-220-105-30 CE 3500 CE 100 324270 TRN1-270-105-30 CE 2600 CE 100 324280
TRN1-180-115-30 CE 4500 CE 110 324300 TRN1-220-115-30 CE 3900 CE 110 324310 TRN1-270-115-30 CE 3000 CE 110 324320
TRN1-270-125-30 CE 3600 CE 120 324360
TRN1-270-145-30 CE 4300 CE 140 312850

Length 2900 mm Length 3300 mm

TRN1-290-085-30 CE 1500 CE 180 324250 TRN1-330-115-30 CE 2200 CE 110 324340
TRN1-290-105-30 CE 2300 CE 100 324290 TRN1-330-125-30 CE 2600 CE 120 324380
TRN1-290-115-30 CE 2700 CE 110 324330 TRN1-330-145-30 CE 3100 CE 140 312910
TRN1-290-125-30 CE 3200 CE 120 324370
TRN1-290-145-30 CE 3800 CE 140 312870

Length 3600 mm Length 3900 mm

TRN1-360-115-30 CE 1900 CE 110 324350 TRN1-390-145-30 CE 2300 CE 140 312970
TRN1-360-125-30 CE 2300 CE 120 324390
TRN1-360-145-30 CE 2700 CE 140 312940

D7
 PALLET RACKING SYSTEMS

PR 600 – the modern pallet racking system

The PR 600 racking system enables One advantage which shows

a variety of versatile configurations itself later – the ability to adapt
to be achieved. Almost all configu- to changing circumstances. The
rations can be accommodated – frames are bolted for maximum
longitudinal beam racking, front- load bearing capacity.
to-back racking and drive-in racking
The modern racking system –
for maximum storage capacity
a versatile modular system for
occupying minimum space.
individual solutions.

D8
 i GALVANISED
Frame
GENTIAN BLUE
Longitudinal
Longitudinal beam racking PR 600
beams
RAL 5010

왘 Highest load bearing capacity

frame load bearing capacity up to 30000 kg
(at least 2 beam pairs INP 100 per bay and
5 bays per racking row), beam load
Frames and longitudinal
bearing capacity 4500 kg per pair
왘 Lightweight and economic
beams PR 600
construction
왘 Stable due to its special design
왘 High quality materials
왘 Dimensional stability P-profile
front-to-back support
왘 Lug pitch Page D18
hole pitch 50:50 mm
왘 Upright widths
75, 90, 100, 120 mm
왘 Easy set-up P-profile
with few components front-to-back support
왘 Bolted frames

Mesh panels
Page D22

Frame
Page D10
Fork spacer

Angle profile front-

to-back support
Page D18

End stops
Angle profile front-to-back
Page D23 support with fixing angle

Fork spacer
Page D18

Load sign Steel decking panels,

Page D23 laid on top

Steel panels on
beam profile INP
Page D19

Chipboard, Mesh panels on

laid on top beam profile INP
Mesh panel, laid on top
Page D20 Page D19

Longitudinal
Corner protector beams
Page D21 Page D11

Corner protector Load sign Chipboard with edge

protectors, laid on top

D9
 PALLET RACKING SYSTEMS i
Ba
왘 Frame load bearing y lo
ad
capacity
Frames PR 600 the guaranteed frame load bearing cap-
acity depends on compartment height
and beam profile. The values given relate
to racks with at least two pairs of evenly
spaced beams per bay and racking rows

opening
Bottom

height
of at least five bays, using INP 100 Co
mp
longitudinal beam profiles. . lo
ad

Racking height
Different values are produced depending
on the horiztonal beam profile.
Please consult our specialists for
advice.

P 73 profile P 93 profile P 95 profile

Cle
Upright width 75 mm 90 mm 90 mm ar
ba
yw
Opening height Frame load bearing capacity idt ing
h ck
Ra pth
1000 mm 8350 kg 12000 kg 14100 kg de

1250 mm 8100 kg 11750 kg 14000 kg

1500 mm 7800 kg 11500 kg 13200 kg
1750 mm 7600 kg 11000 kg 12500 kg
2000 mm 7000 kg 10000 kg 11000 kg
2250 mm 6000 kg 9500 kg 9900 kg
2500 mm 4300 kg 8000 kg 8600 kg

Further frame profiles Accessories for PR 600 from page D17

i on request i
Catalogue dimensions
2200

2500

2700

3000

3300

3600

3800

4100

4400

4700

4900

5200

5500

5800

6000

6300

6600

6900

7100

7400

7700

8000

8200

8500

8800

9100

9300

9600

9900

10200

10400

10700

11000

11300

11500

11800

12100
Further standard dimensions
P 73 profile
Item Frame height Order no. Item Frame height Order no. Item Frame height Order no.
(mm) (mm) (mm)

Frame depth 850 mm Frame depth 1050 mm Frame depth 1250 mm

RV1-773-0250-085 2500 307280 RV1-773-0250-105 2500 307520 RV1-773-0250-125 2500 307760
RV1-773-0300-085 3000 307290 RV1-773-0300-105 3000 307530 RV1-773-0300-125 3000 307770
RV1-773-0360-085 3600 307300 RV1-773-0360-105 3600 307540 RV1-773-0360-125 3600 307780
RV1-773-0410-085 4100 307310 RV1-773-0410-105 4100 307550 RV1-773-0410-125 4100 307790
RV1-773-0470-085 4700 307320 RV1-773-0470-105 4700 307560 RV1-773-0470-125 4700 307800
RV1-773-0520-085 5200 307330 RV1-773-0520-105 5200 307570 RV1-773-0520-125 5200 307810

P 93 profile
RV1-973-0250-085 2500 307340 RV1-973-0250-105 2500 307580 RV1-973-0250-125 2500 307820
RV1-973-0300-085 3000 307350 RV1-973-0300-105 3000 307590 RV1-973-0300-125 3000 307830
RV1-973-0360-085 3600 307360 RV1-973-0360-105 3600 307600 RV1-973-0360-125 3600 307840
RV1-973-0410-085 4100 307370 RV1-973-0410-105 4100 307610 RV1-973-0410-125 4100 307850
RV1-973-0470-085 4700 307380 RV1-973-0470-105 4700 307620 RV1-973-0470-125 4700 307860
RV1-973-0520-085 5200 307390 RV1-973-0520-105 5200 307630 RV1-973-0520-125 5200 307870
RV1-973-0580-085 5800 307400 RV1-973-0580-105 5800 307640 RV1-973-0580-125 5800 307880
RV1-973-0630-085 6300 307410 RV1-973-0630-105 6300 607650 RV1-973-0630-125 6300 307890
RV1-973-0690-085 6900 307420 RV1-973-0690-105 6900 307660 RV1-973-0690-125 6900 307900
RV1-973-0740-085 7400 307430 RV1-973-0740-105 7400 307670 RV1-973-0740-125 7400 307910

P 95 profile
RV1-975-0360-085 3600 307440 RV1-975-0360-105 3600 307680 RV1-975-0360-125 3600 307920
RV1-975-0410-085 4100 307450 RV1-975-0410-105 4100 307690 RV1-975-0410-125 4100 307930
RV1-975-0470-085 4700 307460 RV1-975-0470-105 4700 307700 RV1-975-0470-125 4700 307940
RV1-975-0520-085 5200 307470 RV1-975-0520-105 5200 307710 RV1-975-0520-125 5200 307950
RV1-975-0580-085 5800 307480 RV1-975-0580-105 5800 307720 RV1-975-0580-125 5800 307960
RV1-975-0630-085 6300 307490 RV1-975-0630-105 6300 307730 RV1-975-0630-125 6300 307970
RV1-975-0690-085 6900 307500 RV1-975-0690-105 6900 307740 RV1-975-0690-125 6900 307980
RV1-975-0740-085 7400 307510 RV1-975-0740-105 7400 307750 RV1-975-0740-125 7400 307990

D10
 GALVANISED GENTIAN BLUE Longitudinal beam racking PR 600
Upright profiles Longitudinal beams
RAL 5010

왘 Upright profiles 왘 System dimensions of longitudinal

the uprights are made from cold-rolled steel and beam racks
are very rigid. These are then bolted to form the
stable frame using horizontal and diagonal
Storage front-to-back
Pallet dimensions Storage depth Rack depth
Longitudinal beams
struts. Supplied unassembled.
800 x 1200 mm 1200 mm 1050 mm
50:50 mm perforations. 1000 x 1200 mm 1200 mm 1050 mm
1200 x 1200 mm 1200 mm 1050 mm
Large footplates ensure even distribution of
Storage side by side
load to floor.
Pallet dimensions Storage depth Rack depth
800 x 1200 mm 800 mm 850 mm
왘 Longitudinal beams
1000 x 1200 mm 1000 mm 1050 mm
with welded 5-hook clips. Guarantee a positive
connection to the uprights.

Upright lug pitch 50:50 adjustable.

Supplied with 2 safety pins per unit

(included) to prevent the beam from being
1800 2700 3600
lifted out accidentally. 2200 3300
2700 3900
The loads given are calculated on uniformly
distributed load.

The order numbers refer to a beam.

2700 3900
2700 3900

Compatible with WR 600 longspan racking

i Chapter C, from page C1
Longitudinal INP beams
Item Load Profile Order no. Item Load Profile Order no. Item Load Profile Order no.
capacity/ type capacity/ type capacity/ type
pair (kg) pair (kg) pair (kg)

Length 1800 mm Length 2200 mm Length 2700 mm

TRV1-180-08-I 3000 INP 180 321500 TRV1-220-08-I 2500 INP 180 321540 TRV1-270-08-I 2100 INP 180 321590
TRV1-180-10-I 4500 INP 100 321660 TRV1-220-10-I 4200 INP 100 321700 TRV1-270-10-I 3500 INP 100 321750
TRV1-270-12-I 4500 INP 120 321970

Length 2900 mm Length 3300 mm

TRV1-290-08-I 1900 INP 180 321610 TRV1-330-08-I 1400 INP 180 321650
TRV1-290-10-I 3300 INP 100 321770 TRV1-330-10-I 2700 INP 100 321810
TRV1-290-12-I 4500 INP 120 321990 TRV1-330-12-I 4400 INP 120 322030

Length 3600 mm Length 3900 mm

TRV1-360-10-I 2300 INP 100 321840 TRV1-390-10-I 2000 INP 100 321870
TRV1-360-12-I 3900 INP 120 322060 TRV1-390-12-I 3400 INP 120 322090

Longitudinal CE beams
Item Load Profile Order no. Item Load Profile Order no. Item Load Profile Order no.
capacity/ type capacity/ type capacity/ type
pair (kg) pair (kg) pair (kg)

Length 1800 mm Length 2200 mm Length 2700 mm

TRV1-180-085-30 CE 3200 CE 180 322160 TRV1-220-085-30 CE 2500 CE 180 322200 TRV1-270-085-30 CE 1700 CE 180 322250
TRV1-180-105-30 CE 4200 CE 100 322440 TRV1-220-105-30 CE 3500 CE 100 322480 TRV1-270-105-30 CE 2600 CE 100 322530
TRV1-180-115-30 CE 4500 CE 110 322720 TRV1-220-115-30 CE 3900 CE 110 322760 TRV1-270-115-30 CE 3000 CE 110 322810
TRV1-270-125-30 CE 3600 CE 120 323090
TRV1-270-145-30 CE 4300 CE 140 323370

Length 2900 mm Length 3300 mm

TRV1-290-085-30 CE 1500 CE 180 322270 TRV1-330-115-30 CE 2200 CE 110 322870
TRV1-290-105-30 CE 2300 CE 100 322550 TRV1-330-125-30 CE 2600 CE 120 323150
TRV1-290-115-30 CE 2700 CE 110 322830 TRV1-330-145-30 CE 3100 CE 140 323430
TRV1-290-125-30 CE 3200 CE 120 323110
TRV1-290-145-30 CE 3800 CE 140 323390

Length 3600 mm Length 3900 mm

TRV1-360-115-30 CE 1900 CE 110 322900 TRV1-390-145-30 CE 2300 CE 140 323490
TRV1-360-125-30 CE 2300 CE 120 323180
TRV1-360-145-30 CE 2700 CE 140 323460

D11
 PALLET RACKING SYSTEMS

Front-to-back racking PR 600

SSI SCHAEFER’s front-to-back

racking is a special feature for
single-location storage. There is
no better solution for this kind of
storage. The utilization of the room
height is optimal, since no design
features limit the height of the
stored goods.

Front-to-back racking is particularly

suitable for order picking from
containers and pallets stored
front-to-back. The load height can
be used fully. The single-location
construction is also an advantage
for high-rise racking, especially
when heavy goods have to be
stored above each other.

D12
 i GALVANISED
Frame
GENTIAN BLUE
Longitudinal
Front-to-back racking PR 600
beams
RAL 5010

왘 Highest load bearing capacity

frame load bearing capacity up to 15000 kg
(with 2 pairs of longitudinal beams
per bay up to the 7400 mm frame Frames and front-to-back
height), with higher frames, 3 pairs
of longitudinal beams should be used
왘 Lightweight and economic construction
beams PR 600
왘 Sturdy due to its special design
왘 High quality materials
왘 Dimensional stability
왘 Perforation
hole pitch 50:50 mm
왘 Upright width
75, 90, 100 mm
왘 Simple assembly Front-to-back beam
with few components
왘 Bolted frames

Mesh panels
Page D22

Frame
Page D14

Front-to-back support
with horizontal bracing

Horizontal braces
Page D14

End stops
Page D23 Shelf

Front-to-back supports
Page D15

Extendable shelf

Load sign
Page D23

Cable drum holder

Page D17
Extendable shelves Shelves Cable drum holder
Page D16 on request

Corner protector
Page D21

Corner protector Load sign

D13
 PALLET RACKING SYSTEMS i GALVANISED GENTIAN BLUE

RAL 5010

왘 Upright profiles
Front-to-back racking PR 600 the uprights are made from cold-rolled steel and are very rigid.
These are then bolted to form the stable frame using horizontal
and diagonal struts.

50:50 mm perforations.

Large footplates ensure even distribution of load to floor.

Different upright profiles
i on request
Unassembled.

Catalogue dimensions
2200

2500

2700

3000

3300

3600

3800

4100

4400

4700

4900

5200

5500

5800

6000

6300

6600

6900

7100

7400

7700

8000

8200

8500

8800
Further standard dimensions
P 95 profile
Item Frame height Order no. Item Frame height Order no. Item Frame height Order no.
(mm) (mm) (mm)

Frame depth 850 mm Frame depth 1050 mm Frame depth 1250 mm

RV1-975-0360-085 3600 307440 RV1-975-0360-105 3600 307680 RV1-975-0360-125 3600 307920
RV1-975-0410-085 4100 307450 RV1-975-0410-105 4100 307690 RV1-975-0410-125 4100 307930
RV1-975-0470-085 4700 307460 RV1-975-0470-105 4700 307700 RV1-975-0470-125 4700 307940
RV1-975-0520-085 5200 307470 RV1-975-0520-105 5200 307710 RV1-975-0520-125 5200 307950
RV1-975-0580-085 5800 307480 RV1-975-0580-105 5800 307720 RV1-975-0580-125 5800 307960
RV1-975-0630-085 6300 307490 RV1-975-0630-105 6300 307730 RV1-975-0630-125 6300 307970
RV1-975-0690-085 6900 307500 RV1-975-0690-105 6900 307740 RV1-975-0690-125 6900 307980
RV1-975-0740-085 7400 307510 RV1-975-0740-105 7400 307750 RV1-975-0740-125 7400 307990

Angle profile front-to-back support

For storage of pallets and containers.
Fixing to horizontal braces.

Front-to-back
support

Longitudinal Cross section L 80/40/6

bracing
Load capacity up to 1000 kg
Without backstop With backstop 40 mm
Item Frame Pallet/ Order no. Item Frame Pallet/ Order no.
Horizontal braces U 100 depth Container depth Container
(mm) depth (mm) (mm) depth (mm)
With 5-hook welded connectors to guarantee
secure attachment to the uprights. Lug pitch QA85 850 800 155100 QA85A 850 800 155110
50:50 mm. QA105 1050 1000 155120 QA105A 1050 1000 155130
Includes four safety locking pins per pair to QA125 1250 1200 155140 QA125A 1250 1200 155150
prevent accidental dislodging of the beam.
With fixing holes for front-to-back supports.
Cross section L 100/50/6
Load capacity up to 1500 kg
Without backstop With backstop 50 mm
Item Length Pallet/ Order no. Item Frame Pallet/ Order no. Item Frame Pallet/ Order no.
(mm) Container depth Container depth Container
depth (mm) (mm) depth (mm) (mm) depth (mm)
LVU 090 900 800 116930 QA855 850 800 155160 QA855A 850 800 155170
LVU 110 1100 1000 116940 QA1055 1050 1000 155180 QA1055A 1050 1000 155190
LVU 130 1300 1200 116950 QA1255 1250 1200 155200 QA1255A 1250 1200 155210

D14
 Front-to-back racking PR 600

Front-to-back supports

Front-to-back supports with welded connectors

Lug pitch 50:50 mm. The hooks are especially designed to fit securely in uprights to prevent
any accidental movement.

Cross section L 80/40/6

Load capacity up to 1000 kg
Without backstop With backstop 40 mm
Item Frame Pallet/ Order no. Item Frame Pallet/ Order no.
depth Container depth Container
(mm) depth (mm) (mm) depth (mm)
QTE 85 850 800 143520 QTE 85 A 850 800 143530
QTE 105 1050 1000 143560 QTE 105 A 1050 1000 143570
QTE 125 1250 1200 143600 QTE 125 A 1250 1200 143610
Cross section L 100/50/6
Load capacity up to 1500 kg
Without backstop With backstop 50 mm
Item Frame Pallet/ Order no. Item Frame Pallet/ Order no.
depth Container depth Container
(mm) depth (mm) (mm) depth (mm)
QTE 855 850 800 143540 QTE 855 A 850 800 143550
QTE 1055 1050 1000 143580 QTE 1055 A 1050 1000 143590
QTE 1255 1250 1200 143620 QTE 1255 A 1250 1200 143630

Front-to-back supports with inclined position and folded profile

Lug pitch 50:50 mm. The hooks are especially designed to fit securely in uprights to prevent
any accidental movement.

Cross section L 90/50/4

Without backstop
Item Frame Pallets/ Load Order no.
depth Container capacity
(mm) depth (mm) (kg)
QTE 859 850 800 1000 116960
QTE 1059 1050 1000 850 116970
QTE 1259 1250 1200 650 116980

Cross section L 90/50/4

With backstop 50 mm
Item Frame Pallets/ Load Order no.
depth Container capacity
(mm) depth (mm) (kg)
QTE 859 A 850 800 1000 124660
QTE 1059 A 1050 1000 850 124670
QTE 1259 A 1250 1200 650 124680

D15
 PALLET RACKING SYSTEMS i GENTIAN BLUE GREY GALVANISED

RAL 5010 RAL 7037

Accessories for PR 600 (Front-to-back racking)

Heavy duty extendable shelves

Carefully welded steel construction. With precision steel ball
bearing. Guide rails are bolted to the frames and are adjustable
in increments of 50 mm. A double bolt secures the shelf, both
when extended and retracted. Load bearing capacity of 1000 kg
uniformly distributed load.

Heavy duty extendable shelves, 67 % extendable

Item Frame Useable Extension Load capa- Order no.
depth (mm) depth (mm) length (mm) city (kg)

Extendible shelves, steel coating, smooth

For racking with clear bay width of 900 mm and useful width of 800 mm.
AB 08.091 850 800 530 1000 143230
AB 12.091 1250 1200 830 1000 143260

For racking with clear bay width of 1300 mm and useful width of 1200 mm.
AB 08.131 850 800 530 1000 143290
AB 12.131 1250 1200 830 1000 143320
Extendible shelves, steel coating, 3 raised edges
For racking with clear bay width of 900 mm and useful width of 800 mm.
AB 08.092 850 800 530 1000 143240
AB 12.092 1250 1200 830 1000 143270

For racking with clear bay width of 1300 mm and useful width of 1200 mm.
AB 08.132 850 800 530 1000 143300
AB 12.132 1250 1200 830 1000 143330
Extendible shelves, chipboard cover
For racking with clear bay width of 900 mm and useful width of 800 mm.
Extendable shelves, steel coating, smooth AB 08.093 850 800 530 1000 143250
AB 12.093 1250 1200 830 1000 143280

For racking with clear bay width of 1300 mm and useful width of 1200 mm.
AB 08.133 850 800 530 1000 143310
AB 12.133 1250 1200 830 1000 143340

Heavy duty extendable shelves, 100 % extendable

Item Frame Useable Extension Load capa- Order no.
depth (mm) depth (mm) length (mm) city (kg)

Extendible shelves, steel coating, smooth

For racking with clear bay width of 900 mm and useful width of 800 mm.
AB 08.091 V 850 800 800 1000 143800
AB 12.091 V 1250 1200 1200 1000 143860

For racking with clear bay width of 1300 mm and useful width of 1200 mm.
Extendable shelves, steel coating, 3 raised edges AB 08.131 V 850 800 800 1000 143830
AB 12.131 V 1250 1200 1200 1000 143890
Extendible shelves, steel coating, 3 raised edges
For racking with clear bay width of 900 mm and useful width of 800 mm.
AB 08.092 V 850 800 800 1000 143810
AB 12.092 V 1250 1200 1200 1000 143870

For racking with clear bay width of 1300 mm and useful width of 1200 mm.
AB 08.132 V 850 800 800 1000 143840
AB 12.132 V 1250 1200 1200 1000 143900
Extendible shelves, chipboard cover
For racking with clear bay width of 900 mm and useful width of 800 mm.
AB 08.093 V 850 800 800 1000 143820
AB 12.093 V 1250 1200 1200 1000 143880

For racking with clear bay width of 1300 mm and useful width of 1200 mm.
AB 08.133 V 850 800 800 1000 143850
Extendable shelves, chipboard cover
AB 12.133 V 1250 1200 1200 1000 143910

D16
i Accessories pallet racking
왘 Cable drum sizes in accordance with DIN 46 391
Nominal Exterior Ø Interior Ø Width Clear bay Max. load

Int. Ø
size (mm) (mm) (mm) width (mm) capacity(kg)
N 5 470 56 470 900 100

Ext. Ø
N 6 630 56 470 900 100
N 7
N 8
710
800
80
80
550
550
900
900
250
650 Accessories
N 9 900 80 710 1100 800
N 10 1050 80 710 1100 1000 Width
N 12 1250 80 930 1300 1500

Cable drum axle

Cable drum axles made from round profile for insertion through the
cable holder.
Item Clear bay Design Cone For cable Order no.
width (mm) for type drums

TRA KM 0905 900 type KM AK 33 N5-N6 143410

TRA KB 0905 900 type KB AK 33 N5-N6 143750
TRA KM 0910 900 type KM AK 48 N7-N8 143920
TRA KB 0910 900 type KB AK 48 N7-N8 143760
TRA KM 1105 1100 type KM AK 33 N5-N6 143930 Cable drum holder QT KM Cable drum holder QT KB
TRA KB 1105 1100 type KB AK 33 N5-N6 143770
TRA KM 1110 1100 type KM AK 48 N7-N8 143420
TRA KB 1110 1100 type KB AK 48 N7-N8 143780 Cable drum holder
TRA KM 1115 1100 type KM AK 60 N 9 - N 10 143430
TRA KB 1115 1100 type KB AK 60 N 9 - N 10 143790 Cable drum holders made from square profile are bolted to the
uprights. Lug pitch 50 : 50 mm, axle positioned in hollow or with a
TRA KM 1315 1300 type KM AK 60 N 9 - N 12 143440 friction lining to act as a brake and reduce the noise when extracting
TRA KB 1315 1300 type KB AK 60 N 9 - N 12 143950 the cable.

Cones Item Frame Design For cable Order no.

depth (mm) drums
With positioning screw to centre the cable drum on the axle.
Item For cable drums Material Order no. QT KM 6208 850 with hollow N 5 - N 12 143370
AK 33 N5-N6 Polyamide 143940 QT KM 6210 1050 with hollow N 5 - N 12 143390
AK 48 N7-N8 Polyamide 143350 QT KB 6208 850 with friction lining N 5 - N 12 143380
AK 60 N 9 - N 12 Polyamide 143360 QT KB 6210 1050 with friction lining N 5 - N 12 143400

Floor anchors
Racking must be anchored to the floor to
guarantee stability. M10 expansion anchors
are used for normal C20/25 concrete floors
and M10 threaded anchors for floors
containing magnesium.

Item Order no.

BA 10 SL M 10 Expansion anchor 67030

BA 10 VA M 10 Threaded anchor 67390 Expansion anchor Threaded anchor

Base shims Insulation plates

For pallet racking PR 350 For pallet racking PR 350
Used to compensate for any floor When racking is erected on floors containing
unevenness, galvanised. magnesium, plastic insulation plates are
necessary for each upright to prevent any
corrosion.
Item Thickness Support Order no. Item Thickness Support Order no.
(mm) profile (mm) profile
AP 35.81 1 U 70 151000 IP 35.81 1 U 70 151040
AP 35.82 2 U 70 151010 IP 35.81 1 U 80 151040
AP 35.81 1 U 80 151000 IP 35.11 1 U 100 151050
AP 35.82 2 U 80 151010
AP 35.11 1 U 100 151020
AP 35.12 2 U 100 151030
For pallet racking PR 600 For pallet racking PR 600
For all upright profiles. Used to compensate For all upright profiles. When racking is
for any floor unevenness, galvanised. erected on floors containing magnesium,
plastic insulation plates are necessary for
each upright to prevent any corrosion.

Item Thickness Order no. Item Thickness Order no.

(mm) (mm)
AP 60.91 1 143150 IP 60.91 1 155020
AP 60.92 2 155010

D17
 PALLET RACKING SYSTEMS i GALVANISED GENTIAN BLUE
Fixing Spacer
angles Front-to-back supports
RAL 5010 Fork spacers

Accessories for PR 350 and PR 600

Fixing angle for front-to-back supports

Fastening possibilities for front-to-back
supports, for Euro pallets, industry pallets,
DIN mesh box pallets.
Item Clear bay width Order no.
(mm)

AW 18 1800 155030
AW 22 2200 155040
AW 27 2700 155050
AW 29 2900 155060
AW 33 3300 155070
AW 36 3600 155080
AW 39 3900 155090
Angle profile front-to-back support for pallet and container storage
Front-to-back supports hold loading aids safely in pallet racks. One pair of front-to-back supports
is necessary for each loading aid when storing containers on longitudinal beams with no decking
surface or when storing pallets and containers side-by-side. Fixing angles are required to secure
the supports in place and prevent movement on the longitudinal beams (see above figure).
Cross section L 80/40/6
Spacers
Load capacity up to 1000 kg
Two single-face racking units positioned one Without backstop With backstop 40 mm
behind the other can be joined together by
means of spacers to form a double-face Item Frame Pallet/ Order no. Item Frame Pallet/ Order no.
depth Container depth Container
unit. The length of the spacers is given by (mm) depth (mm) (mm) depth (mm)
the difference between the racking depth
and pallet/goods stored, plus 100 mm. QA85 850 800 155100 QA85A 850 800 155110
QA105 1050 1000 155120 QA105A 1050 1000 155130
Item Distance Order no.
(mm) QA125-10 1050 1200 155260 QA125-10A 1050 1200 155280
QA125 1250 1200 155140 QA125A 1250 1200 155150
D 50 L 50 151060 Cross section L 100/50/6
D 100 L 100 151070 Load capacity up to 1500 kg
D 150 L 150 151080 Without backstop With backstop 50 mm
D 200 L 200 151090 Item Frame Pallet/ Order no. Item Frame Pallet/ Order no.
D 250 L 250 151100 depth Container depth Container
D 300 L 300 151110 (mm) depth (mm) (mm) depth (mm)
D 350 L 350 151120 QA855 850 800 155160 QA855A 850 800 155170
D 400 L 400 151130 QA1055 1050 1000 155180 QA1055A 1050 1000 155190
D 450 L 450 151140 QA1255-10 1050 1200 155270 QA1255-10A 1050 1200 155290
D 500 L 500 151150 QA1255 1250 1200 155200 QA1255A 1250 1200 155210

P-profile front-to-back supports for pallet storage Fork spacer

Pallet supports ensure secure storage of pallets side-by-side. At least two pallet supports Used when storing wooden pallets, crates,
are required for each pallet stored. boxes, containers or other bulky goods. Spacer
height for access by fork-lift truck: 100 mm,
max. load per spacer: 2000 kg with uniformly
distributed load.

Item Frame depth Pallet/Container Max. load Max. pallet Order no. Item For frame depth Order no.
(mm) depth (mm) per unit (kg) weight (kg) (mm)
Cross section P 90
UN 853 850 800 290 1200 31220 QU 851 850 155220
UN 103 1050 1000 235 1000 31230 QU 1051 1050 155230
UN 123 1250 1200 195 800 31240 QU 1251 1250 155240

D18
i GALVANISED Accessories pallet racking
Mesh panels
Steel decking
panels

Accessories for PR 350 and PR 600

Mesh panels
Are laid on top of the longitudinal beams. Mesh size 33 x 33 mm. From clear bay width 2200 mm in two sections. Load values given are based on
a uniformly distributed load.

Mesh panels on top for beam profiles INP and CE

Item Frame Clear bay Support bar Bay Order no.
depth (mm) width (mm) height (mm) load (kg)

FGA18-085-30-134X 850 1800 30 1600 156090

FGA18-105-30-134X 1050 1800 30 1400 156160
FGA18-125-35-140X 1250 1800 35 1500 156230
FGA22-085-30-134X 850 2200 30 2000 156100
FGA22-105-30-134X 1050 2200 30 1700 156170
FGA22-125-35-140X 1250 2200 35 1900 156240
FGA27-085-30-134X 850 2700 30 2500 156110
FGA27-105-30-134X 1050 2700 30 2100 156180 Mesh panel on top
– INP profile
FGA27-125-35-140X 1250 2700 35 2300 156250
FGA29-085-30-134X 850 2900 30 2700 156120
FGA29-105-30-134X 1050 2900 30 2300 156190
FGA29-125-35-140X 1250 2900 35 2500 156260
FGA33-085-30-134X 850 3300 30 3000 156130
FGA33-105-30-134X 1050 3300 30 2600 156200
FGA33-125-35-140X 1250 3300 35 2900 156270
FGA36-085-30-134X 850 3600 30 3300 156140
FGA36-105-30-134X 1050 3600 30 2800 156210
FGA36-125-35-140X 1250 3600 35 3100 156280
FGA39-085-30-134X 850 3900 30 3500 156150
FGA39-105-30-134X 1050 3900 30 3100 156220 Mesh panel on top
– CE profile
FGA39-125-35-140X 1250 3900 35 3400 156290

Steel decking panels

Are made with rounded edges. The shorter sides hang over the longitudinal beams, securing the panels in place. Panels may be used to cover
part or all of a storage level. Load values given are based on uniformly distributed load.

Clear bay width (mm) Panel width (mm) Number of panels Clear bay width (mm) Panel width (mm) Number of panels
1800 300 6 3300 300 11
2200 300 6 3600 300 12
200 2 3900 300 13
2700 300 9
2900 300 9
200 1

Panel width 200 mm

Item For frame Load capacity Order no.
depth (mm) (kg)

FPA 20-070-40-40X 700 400 193140

FPA 20-085-40-40X 850 400 193150
FPA 20-105-40-40X 1050 300 193160
FPA 20-125-40-40X 1250 200 193170
Panel width 300 mm
Item For frame Load capacity Order no.
depth (mm) (kg)

FPA 30-070-40-30X 700 300 193100

FPA 30-070-40-50X 440 193180
FPA 30-085-40-30X 850 300 193110
FPA 30-085-40-50X 440 193190
FPA 30-105-40-30X 1050 240 193120
FPA 30-105-40-50X 360 193200
FPA 30-125-40-30X 1250 190 193130
FPA 30-125-40-50X 280 193210

D19
 PALLET RACKING SYSTEMS

Accessories for PR 350 and PR 600

Chipboard
Are to be inserted on the profile of the INP or CE longitudinal beams. 38 mm thick, standard for INP and CE beams
Secured in place by brackets. For bay width in excess of 3300 mm, Item Frame Clear bay Comp. load Order no.
panels are supplied in two sections. Load values given are based on depth (mm) width (mm) (kg)
a uniformly distributed load. Surface: natural. FSA 18-085-38-NX 850 1800 1300 306840
FSA 18-105-38-NX 1050 1800 950 306980
FSA 18-125-38-NX 1250 1800 600 307120
FSA 22-085-38-NX 850 2200 1600 306850
FSA 22-105-38-NX 1050 2200 1100 306990
FSA 22-125-38-NX 1250 2200 750 307130
FSA 27-085-38-NX 850 2700 2000 306860
FSA 27-105-38-NX 1050 2700 1400 307000
FSA 27-125-38-NX 1250 2700 900 307140
FSA 29-085-38-NX 850 2900 2200 306870
FSA 29-105-38-NX 1050 2900 1500 307010
FSA 29-125-38-NX 1250 2900 1000 307150
FSA 33-085-38-NX 850 3300 2500 306880
FSA 33-105-38-NX 1050 3300 1700 307020
FSA 33-125-38-NX 1250 3300 1100 307160
FSA 36-085-38-NX 850 3600 2700 306890
FSA 36-105-38-NX 1050 3600 1900 307030
FSA 36-125-38-NX 1250 3600 1200 307170
FSA 39-085-38-NX 850 3900 2900 306900
FSA 39-105-38-NX 1050 3900 2000 307040
FSA 39-125-38-NX 1250 3900 1300 307180
38 mm thick, high density for INP and CE beams
Chipboard laid on top
Item Frame Clear bay Comp. load Order no.
depth (mm) width (mm) (kg)
FSA 18-085-38-HX 850 1800 2100 306910
FSA 18-105-38-HX 1050 1800 1500 307050
Fixing bracket FSA 18-125-38-HX 1250 1800 1000 307190
FSA 22-085-38-HX 850 2200 2600 306920
FSA 22-105-38-HX 1050 2200 1900 307060
FSA 22-125-38-HX 1250 2200 1300 307200
FSA 27-085-38-HX 850 2700 3200 306930
FSA 27-105-38-HX 1050 2700 2300 307070
FSA 27-125-38-HX 1250 2700 1600 307210
FSA 29-085-38-HX 850 2900 3500 306940
FSA 29-105-38-HX 1050 2900 2500 307080
FSA 29-125-38-HX 1250 2900 1700 307220
FSA 33-085-38-HX 850 3300 4000 306950
FSA 33-105-38-HX 1050 3300 2800 307090
FSA 33-125-38-HX 1250 3300 1900 307230
Edge protectors
FSA 36-085-38-HX 850 3600 4000 306960
FSA 36-105-38-HX 1050 3600 3100 307100
FSA 36-125-38-HX 1250 3600 2100 307240
FSA 39-085-38-HX 850 3900 4000 306970
FSA 39-105-38-HX 1050 3900 3300 307110
FSA 39-125-38-HX 1250 3900 2300 307250

Fixing bracket Edge protectors

For chipboard 38 mm and longitudinal beams INP/CE. 4 fixing brackets For 38 mm chipboard and INP/CE longitudinal beams, incl. spacing blocks.
each are needed for clear bay widths 1800 to 2900 mm and 6 fixing Item Clear bay width Order no.
brackets each are needed for clear bay widths 3300 to 3900 mm. (mm)
Item Unit Order no.
KN 1824 1800 157140
KN 2224 2200 157150
FSHB 24 Fixing bracket, incl. spacing block (plastic) 1 156910 KN 2724 2700 157160
KN 2924 2900 157170
KN 3324 3300 157180
KN 3624 3600 157190
KN 3924 3900 157200

D20
i GALVANISED YELLOW SIGNAL YELLOW Accessories pallet racking

RAL 1021 MARKING

왘 Safety regulations
stationary racks, which are served by monorail
cranes, must be sufficiently secured at the
corner areas – also at passages – against Safety accessories for pallet racking
damage of the frame

Corner protector Guard Upright protector

ES 400 C
Corner protector Guard
Robust angle channel section with sturdy To protect uprights against damage from
floor plate, includes anchor bolts to fix the conveying vehicles, 140 mm wide,
protector to the hall floor. U-shaped, includes 3 anchor bolts.

Item Height Order no. Item Height Order no. Upright protector
(mm) (mm)
Used to strengthen the front shelf supports
ES 400 C 400 157390 AS 400 400 157420 and used to provide protection against
damage, including fixing materials.

For system PR 350: For system PR 600:

Item for upright Height for upright Order no. Item for upright Height for upright Order no.
width (mm) (mm) profile width (mm) (mm) profile

STS 70-3-400 70 400 U 70 158500 STS 75-6-400 75 400 P 75 158530

STS 70-3-750 750 U 70 158570 STS 75-6-750 750 P 75 158600
STS 80-3-400 80 400 U 80 158510 STS 90-6-400 90 400 P 90 158540
STS 80-3-750 750 U 80 158580 STS 90-6-750 750 P 90 158610
STS 100-3-400 100 400 U 100 158520 STS 100-6-400 100 400 P 100 158550
STS 100-3-750 750 U 100 158590 STS 100-6-750 750 P 100 158620
STS 120-6-400 120 400 P 120 158560
STS 120-6-750 750 P 120 158630

Buffers
Buffers should be used where pallet
racking is in particular danger of
being hit by fork lift trucks, e.g.
access aisles or aisles which are
frequently used.
Type A Type B Type C

Type A: Type B:
400 mm high, approx. 250 mm wide, inclined front section for 400 mm high, 245 mm wide, including anchor bolts.
optimum deflection of impact forces to the floor, incl. anchor bolts. For upright profile P 75 and P 90.
Item For frame depth Order no. Item For frame depth Order no.
(mm) (mm)

RS 854 A 850 157800 RS24 0854 B 850 151510

RS 1054 A 1050 157810 RS24 1054 B 1050 151520
RS 1254 A 1250 157820 RS24 1254 B 1250 151530
RS 1804 A 1800 157830 RS24 1804 B 1800 151540
RS 2204 A 2200 157840 RS24 2204 B 2200 151550
RS 2354 A 2350 157850 RS24 2354 B 2350 151560
RS 2604 A 2600 157860 RS24 2604 B 2600 151610
Type C: Type B:
With sturdy C-Sigma profile, 400 mm high, 75 mm wide, including 400 mm high, 265 mm wide, including anchor bolts.
anchor bolts, above 1800 mm length with additional support on centre. For upright profile P 100 und P 120.
RS 854 C 850 157430 RS26 0854 B 850 151400
RS 1054 C 1050 157440 RS26 1054 B 1050 151410
RS 1254 C 1250 157450 RS26 1254 B 1250 151420
RS 1804 CZ 1800 157690 RS26 1804 B 1800 151430
RS 2204 CZ 2200 157700 RS26 2204 B 2200 151440
RS 2354 CZ 2350 157710 RS26 2354 B 2350 151450
RS 2604 CZ 2600 157720 RS26 2604 B 2600 151500

D21
 PALLET RACKING SYSTEMS i GREY GENTIAN BLUE GALVANISED

RAL 7037 RAL 5010

Safety accessories for pallet racking

Frame extension Item System Frame Frame- Surface Order no.

profile (mm) depth (mm)
at row ends
Used to prevent items from falling AN 78 PR 350 70 850 RAL 7037 33160
sideways of the pallet racking, AN 68 PR 600 75 850 Galvanised 34870
500 mm high, incl. fixing AN 88 PR 350 80 850 RAL 7037 33170
materials.
AN 98 PR 600 90 850 Galvanised 34860
Surface: grey, RAL 7037 AN 18 PR 350 100 850 RAL 7037 33180
or galvanised.
AN 71 PR 350 70 1050 RAL 7037 33190
AN 61 PR 600 75 1050 Galvanised 34880
AN 81 PR 350 80 1050 RAL 7037 33200
AN 91 PR 600 90 1050 Galvanised 34840
AN 11 PR 350 100 1050 RAL 7037 33210
AN 72 PR 350 70 1250 RAL 7037 33220
AN 62 PR 600 75 1250 Galvanised 34890
AN 82 PR 350 80 1250 RAL 7037 33230
AN 92 PR 600 90 1250 Galvanised 34850
AN 12 PR 350 100 1250 RAL 7037 33240

Mesh back cladding

The back of free-standing racking must be clad in order to prevent Ordering information: The max. permissible projection of the grating
goods from falling and/or to keep them securely in place. Please units over the upper edge of the frame is 400 mm.
observe the current security regulations and contact our specialists If the grating units are required to project over the upper edge of the
for advice. Depending on the racking height and useful bay width, frame by more than 400 mm, higher frames must be selected for the
mesh panels can be combined freely. Each element consists of a relevant racking rows.
sturdy angle frame with welded 50 x 50 mm mesh, including fixing
materials. Distances: 180 mm outer edge of upright profile – inside edge
GRC profile; 210 mm outer edge of upright profile –
outer edge of GRC profile.
Example order
For one racking with 3000 mm height
you will need:
2 mesh panels of 1100 mm and
1 mesh panel of 1200 mm height
For pallet racking,
3900 mm bay width, you will order:
2 x GRC 3911 and 1 x GRC 3912

Racking height in mm 2500 3000 3600 4100 4700 5200 5800 6300 6900 7400
Required back panel
height in mm 2900 3400 4000 4500 5100 5600 6200 6700 7300 7800
Number of mesh
panels required
H 1100 mm – 2 1 3 2 4 3 5 4 6
H 1200 mm – 1 – 1 – 1 – 1 – 1
H 1450 mm 2 – 2 – 2 – 2 – 2 –

Item Clear Mesh- Order no. Item Clear Mesh- Order no. Item Clear Mesh- Order no.
bay width segment- bay width segment- bay width segment-
(mm) height (mm) (mm) height (mm) (mm) height (mm)
GRC 911 900 1100 158650 GRC 912 900 1200 158660 GRC 914 900 1450 158670
GRC 1111 1100 1100 158680 GRC 1112 1100 1200 158690 GRC 1114 1100 1450 158700
GRC 1311 1300 1100 158710 GRC 1312 1300 1200 158720 GRC 1314 1300 1450 158730
GRC 1811 1800 1100 158740 GRC 1812 1800 1200 158750 GRC 1814 1800 1450 158760
GRC 2211 2200 1100 158770 GRC 2212 2200 1200 158780 GRC 2214 2200 1450 158790
GRC 2711 2700 1100 158800 GRC 2712 2700 1200 158810 GRC 2714 2700 1450 158820
GRC 2911 2900 1100 158830 GRC 2912 2900 1200 158840 GRC 2914 2900 1450 158850
GRC 3311 3300 1100 158860 GRC 3312 3300 1200 158870 GRC 3314 3300 1450 158880
GRC 3611 3600 1100 158890 GRC 3612 3600 1200 158900 GRC 3614 3600 1450 158910
GRC 3911 3900 1100 158920 GRC 3912 3900 1200 158930 GRC 3914 3900 1450 158940

D22
i Accessories pallet racking
왘 Identification labelling requirements
in accordance with the industry safety regulations,
all racking installations have to be labeled with the
relevant load signs

Racking system:
Safety accessories for pallet racking
Construction year:
Type of rack: Single location pallet racking
Order confirmation no:

Racking height:
(Height to top beam level) mm

Frame depth: mm
Storage area identification from page D24
i
System Type:
No. of storage levels:
Year of construction: Height to first beam level: mm
Order confimation no.: (up to longitudinal brace)

Clear entry: mm
max. bay load: kg
at clear height of Upright profile:
storage level: mm compartment
Level profile load
Load/level: kg Profile:
Length/bay: mm kg
Load/level: kg Profile: kg
Length/bay: mm
kg
Load/level:
Length/bay:
kg Profile:
mm kg Load signs
The sum of all compartment loads must not
exceed the max. usable bay load.
Compartment loads are uniformly
distributed. Damaged or deformed racking
Item WxH Material Order no.
parts must be immediately replaced, since
this would lead to a considerable reduction max. weight/pallet: kg (mm)
of the load bearing capacity. Please consult
the instructions for operating and use. max. usable bay load: kg
FRITZ SCHÄFER GMBH PRTS 7050 LTR 420 x 600 Aluminium, incl. fixing material 992305
Fritz-Schäfer-Straße 20
D-57290 Neunkirchen/Siegerland
Phone +49 / (0) 27 35 / 70-1
FRITZ SCHÄFER GMBH
Fritz-Schäfer-Straße 20 • D-57290 Neunkirchen/Siegerland
PRTS 7050 QTR 420 x 600 Aluminium, incl. fixing material 992305
Fax +49 / (0) 27 35 / 70-6 94 Phone +49 / (0) 27 35 / 70-1 • Fax +49 / (0) 27 35 / 70-6 94
TS 0615 60 x 150 PVC adhesive film 157300

End stops
Back stops are essential when using double-faced racking if the
distance between the goods stored on opposing faces is less than
100 mm. On single-face racking, back stops provide a pallet back
stop. According to requirements, profile widths of 40 mm and 60 mm
can be used.
Distances: 95 mm upright profile outer edge – DS profile inner edge;
135 mm upright profile outer edge – DS profile outer edge.

Item Clear bay width Profile Order no.

(mm)

DS 904 900 C 40/30 158300

DS 1104 1100 C 40/30 158310
DS 1304 1300 C 40/30 158320
DS 1806 1800 C 60/40 158350
DS 2206 2200 C 60/40 158360
DS 2706 2700 C 60/40 158420
DS 2906 2900 C 60/40 158430
DS 3306 3300 C 60/40 158440
DS 3606 3600 C 60/40 158450
DS 3906 3900 C 60/40 158460

Accessories for back stops on single-face racking

When back stops are used in single-face racking, 2 fixing brackets of
100 mm are required.

Item For frame Order no.

depth (mm)

KDS 1 1050 158480

Accessories for back stops on double-face racking

When using back stops on double-face racking, 2 spacers are
required per backstop.
Item Distance Order no.
(mm)

D 50 L 50 151060
D 100 L 100 151070
D 150 L 150 151080
D 200 L 200 151090
D 250 L 250 151100
D 300 L 300 151110

D23
 PALLET RACKING SYSTEMS i YELLOW WHITE

Identification of storage locations

The potential to increase picking The solution is a clearly understand- The print of further information
of logistics processes, speeds and able control system, which can be is possible, for e. g. storage areas,
thus for durable reduction of costs quickly and easily implemented. control numbers, barcodes, posi-
is extraordinarily high. This makes the level of investment tioning arrows.
for visual warehouse organisation
Both manual and automated ware- Fonts, basic colours and sizes
particularly low.
houses can be optimized with better for signs, labels, label holders and
procedures and visual stock orga- The systematic numbering of all ground markings are available in
nisation systems. locations, known as the number numerous variations.
codes, is the basis and prerequisite
The staff productivity increases signi- If you are looking for a type, which
for efficient warehouse organization.
ficantly due to fast and safe stora- is not mentioned here, please ask.
ge, retrieval of goods and relocation Each location receives a clear
of goods. Order pickers and fork lift and unmistakable coding, which
drivers are directed in shortest time consists of at least three coordi-
to the correct storage location. nates: racking row, longitudinal
position and height position.

Other types
i on request

Location labels
Polyethylene film, self-adhesive.
Colour: yellow, print: black, up to
8 characters incl. spaces/separators.
Minimum order quantity 100 pieces.

Quantity discount: 1 - 1999 pieces

Item WxH Order no.
(mm)
R SK 1230 SG 120 x 30 189900
R SK 1438 SG 140 x 38 189901
from 2000 pieces on request R SK 2265 SG 220 x 65 189902

Location labels
Polyethylene film, self-adhesive.
Colour: white, print: black, up to
8 characters incl. spaces/separators.
Minimum order quantity 100 pieces.

Quantity discount: 1 - 1999 pieces

Item WxH Order no.
(mm)
R SK 1230 SW 120 x 30 189903
R SK 1438 SW 140 x 38 189904
from 2000 pieces on request R SK 2265 SW 220 x 65 189905

D24
 Comprehensive accessories

Identification of storage locations

i Position indication Control number

Label versions with one or more digits, with or without, Barcode
colours: yellow, white. Opposite numerical or alphanumerical inverted or normal with or without, different barcode
surface normal or retro-reflective, types, different label positions
self-adhesive or magnetic (left, right, top, bottom), with or
without readable information

Position arrow
with or without, indication to top
Font or bottom, different label positions
colours: black, blue, red. Different font Spaces/Separators Logo/Company ID (left, right)
heights, font types with or without serifs with or without, various with or without text Frame
characters or graphics with or without

Location labels
Polyethylene film, self-adhesive.
Colour: yellow, print: black, up to
8 characters incl. spaces/separators,
with additional barcode.
Minimum order quantity 100 pieces.

Quantity discount: 1 - 1999 pieces

Item WxH Order no.
(mm)
R SK 1230 SGB 192 x 38 189906
R SK 1438 SGB 224 x 38 189907
R SK 2265 SGB 380 x 65 189908 from 2000 pieces on request

Location labels
Polyethylene film, self-adhesive.
Colour: white, print: black, up to
8 characters incl. spaces/separators,
with additional barcode.
Minimum order quantity 100 pieces.

Quantity discount: 1 - 1999 pieces

Item WxH Order no.
(mm)
R SK 1230 SWB 192 x 38 189909
R SK 1438 SWB 224 x 38 189910
R SK 2265 SWB 380 x 65 189911 from 2000 pieces on request

D25
 PALLET RACKING SYSTEMS i YELLOW WHITE

Identification of storage locations

Floor markings Racking row signs Racking row angle signs

Used to label pallets and (block-) storage Made from PVC, impact resistant, colour: Made from PVC, impact resistant, colour:
areas or aisles, self-adhesive, thickness: yellow, font: black, up to 2 characters yellow, font: black, up to 2 characters
0,3 mm, colour: yellow. incl. assembly material. incl. assembly material.

Item Shapes Unit Order no. Item WxH Order no. Item Shank Order no.
(mm) length (mm)
R BM K Circle 1 189917 R RZ 20200 200 x 200 189912 R RW 30300 300 x 300 189915
R BM R Circular 50 189918 R RZ 30300 300 x 300 189913
R BM T T-piece 10 189919 R RZ 50500 500 x 500 189914
R BM KR Cross 1 189920
R BM E Corner piece 10 189921
with printing on req.

Label holder
Self-adhesive plastic label holder, total
height 33 mm (for label height 30 mm). OPERATION NOTE NOTES OF SAFETY
Without push-in labels. For the purpose of safety please report all damage.

Item Length Order no. Employees have to be informed and trained in the
correct use of these facilites.
(mm)
K EH 0880 780 442518 It is not allowed to exceed the maximum permissible
loads of the load signs.
K EH 1080 980 442538
K EH 1280 1180 442558 Modifications to the racking structure have an
influence on the load bearing characteristics of the
K EH 1350 1250 442565 equipment. Those impacts have to be examined and
K EH 1800 1700 442610 cross-checked with the supplier.

K EH 2200 2100 442650 Damaged or deformed shelf parts must be

immediately replaced, since this would lead to a
K EH 2700 2600 442700 considerable reduction of the load bearing capacity.
Pallets, boxes and other loading aids have to be
controlled in view of their safety condition. In case of
damages they have to be replaced immediately.

Responsible Safety Officer:

FRITZ SCHÄFER GMBH FRITZ SCHÄFER GMBH

Fritz-Schäfer-Straße 20 • D-57290 Neunkirchen/Siegerland Fritz-Schäfer-Straße 20 • D-57290 Neunkirchen/Siegerland
Phone +49 / (0) 27 35 / 70-1 • Fax +49 / (0) 27 35 / 70-6 94 Phone +49 / (0) 27 35 / 70-1 • Fax +49 / (0) 27 35 / 70-6 94

Push-in labels Handling instructions/safety instructions

2
Pre-perforated labels 120 g/m paper, Acc. to FEM regulation for storage installations.
white, 20 labels on one DIN A4 sheet Made from aluminum, W 420 x H 600 mm, print multicolour, incl. assembly materials.
for self printing.
Label format: 100 x 30 mm.
Item Format Order no. Item Order no. Item Order no.
(sheet)
R EE 1030 DIN A4 189916 TS 7050 BH Operating instructions 992305 TS 7050 SH Safety notes 992305

D26
 Comprehensive accessories

Identification of storage locations

Preparing a labeling scheme

The numbering scheme is basis for
compiling the storage locations.

Please specify the type of labeling for

each column
– numerical or alphabetical
Cleaner and
– 1-, 2- or 3-digit.
To clean and prepare the surface for self- Example: All locations numerical and 2-digit

For alphabetical labeling please use the

adhesive labels. corresponding numerical value.

A = 1, B = 2, C = 3
and so forth

Item Order no.

Warehouse Row Longitudinal Location Location in Total
R RM Cleaner 0,5 l 189922 area or position or height
aisle bay
R RA Squeegee 189923
R RT Cleaning cloths x 50 189924 Example:
1 to 1 (1) 3 to 3 (1) 3 to 5 (3) 1 to 3 (3) 1 to 4 (4) 1 x 1 x 3 x 3 x 4 = 36
쑗 numerical 쑗 1-digit 쑗 numerical 쑗 1-digit 쑗 numerical 쑗 1-digit 쑗 numerical 쑗 1-digit 쑗 numerical 쑗 1-digit
쑗 alphabetical 쑗 2-digit 쑗 alphabetical 쑗 2-digit 쑗 alphabetical 쑗 2-digit 쑗 alphabetical 쑗 2-digit 쑗 alphabetical 쑗 2-digit
쑗 3-digit 쑗 3-digit

to to to to to

to to to to to

to to to to to

to to to to to

to to to to to

to to to to to

to to to to to

Chains to to to to to

Red/white; chain holder with triangular foot to to to to to

filled with cement; chains made of plastic,

to to to to to
colour change every 50 cm, weather
resistant to resistant to fading. Sum total of storage locations

SSI SCHÄFER • FRITZ SCHÄFER GMBH

Fritz-Schäfer-Straße 20 • D-57290 Neunkirchen / Siegerland
Phone + 49 / (0) 27 35 / 70 - 1 • Fax + 49 / (0) 27 35 / 70 - 3 96
Item Finish Order no.
PDF template
R KS
R KG
Chain holders
Chain
189928
189929 i on request

Safety marking made from PE foil Internat. escape sign EXIT Aluminium plates
66 meters long, 60 mm wide, yellow/black 390 x 115 mm, made from aluminum. Diameter 200 mm, acc. to DIN 4844-2.
hatched.

Item Finish Order no. Item Finish Order no. Item Finish Order no.

R WA LI Pointing left 189927 R IR LI Pointing left 189932 R VZ 20F12 “Pedestrians 189925

R IR RE Pointing right 189933 prohibited”
R IR AB Down 189930 R VZ 20U12 “Access to unauthorized 189926
R IR AU Up 189931 persons prohibited”

D27
 PALLET RACKING SYSTEMS

Drive-in and drive-through racking

SSI SCHAEFER pallet racking can possible, drive-in racking plays a and drive-through racking for protec-
be configured to serve as drive-in major role in modern warehouses. tion and better orientation for the
and/or drive through racking. Drive- fork-lift driver.
Pallet drive-in and drive-through
in racking is the ideal storage solu-
racking are being served by fork If you are planning to build a new
tion if very large quantities of the
lift and reach trucks. Normally used storage installation or to restructure
same product are to be stored, to
by food and non-food industries, an existing one, please check the
achieve maximum storage capacity
especially for goods in high quan- following system characteristics. We
in the minimum space.
tities but low variety, like e. g. fruit, would like to help you with the plan-
Picking and replenishment is faci- fruit juices or care products. When ning and will find the most econo-
litated by means of conventional considering drive-in racking, the mic solution for your logistic needs.
forklift trucks, which can drive into design of the supports is essential
the racks. Although immediate for the installation. Floorguide rails
access to every product is not should ideally be used with drive-in

Further information
i on request

D28
 Drive-in and drive-through racking

Storage in drive-in and drive-through racking

Advantages of drive-in racking: Advantages of drive-through racking:

The main characteristic of drive-in racking is maximum Both sides of the racking can be used, if the racking unit
storage capacity using the minimum amount of space. is free-standing. It is possible for the fork lift truck to
Picking and replenishment is done from one side. drive through. Drive-through racking offers the advantage
The channels can only be served in one direction. that picking and replenishment can take place
independently of each other.

Front-to-back support

Attachment bracket

Drive-in channel
End stops

Drive-through channel

Longitudinal bracing

Buffers Corner protectors and Horizontal cross bracing

floorguide rails

D29
 PALLET RACKING SYSTEMS

Mobile racking for pallets and oversized goods

Buildings cannot always be extended rows of racking as required can be 왘 85 % increase of storage capacity
at will to provide additional storage fitted onto mobile bases and moved over the same surface area.
space. Increasing storage density fully motorized on rails. Only one
to release areas for production access aisle needs to be open, 왘 60 % decrease in building volume
is often difficult. When those depending on where the goods need if you are planning to build new.
situations exist, one should think to be picked. 왘 40 % increase in available
about mobile racking. With modern space, without having to build
If you are planning to build a new
control concepts and well founded a new facility.
storage installation or to restructure
planning anything is possible.
an existing one, please check the We can help you with the planning
The mobile racking system is simple following system characteristics. and will find the most economic
as well as impressive. As many solution for your logistic needs.

Further information
i on request

D30
 Mobile racking systems

Mobile racking

Control cabinet

Release button

Guide rails
Control cabinet
Rail
Release button
Photoelectric Mobile carriage
Guide rails light switch
Rail Mobile racking for long material storage
Mobile carriage
Photoelectric
light switch

Mobile racking for pallet storage

Standard pallet storage

- Building costs/standard floor approx. € 300,000,00
- Racking system cost, 6 storage heights approx. € 20,000,00
- Cost of reach truck 1,2 t approx. € 25,000,00
- Total investment approx. € 345,000,00
- Percent racking usage: aisles 43%
- Storage capacity 912 Euro pallets
- Cost per pallet space approx. € 378,00
including building

Narrow aisle storage

- Building costs/standard floor approx. € 320,000,00
- Cost of level accuracy approx. € 7,000,00
- Racking system cost, 9 storage heights approx. € 43,000,00
- Cost of high-rise stacker 1,5 t approx. € 56,000,00
- Narrow aisle DIN 15 185 approx. € 10,000,00
- Total investment approx. € 435,000,00
- Percent racking usage: aisles 47 %
- Storage capacity 1494 Euro pallets
- Cost per pallet space approx. € 291,00
including building

Mobile racking
- Building costs/standard floor approx. € 300,000,00
- Additional cost for rail movement approx. € 3,000,00
- Racking system cost, 6 storage heights approx. € 94,000,00
- Cost of reach truck 1,2 t approx. € 25,000,00
- Total investment approx. € 422,000,00
- Percent racking usage: aisles 70 %
- Storage capacity 1488 Euro pallets
- Cost per pallet space approx. € 283,00
including building

D31
 PALLET RACKING SYSTEMS

Pallet live storage

Pallet live storage is being used The storage principle is First-in- Further advantages of this storage
as buffer storage in shipping areas, First-out (FiFo). Stored goods with system are in the optimal surface
production, goods reception and expiration dates or product batches and volume use as well as the
dispatch. This kind of racking is are easier to supervise. The design possibility for integration into
normally being served by fork lift of the gravity roller tracks can be automated material flow.
truck and reach truck. Hand pallet adapted by different roller pitches
The pallets can be served on
trucks can be used on the lowest and break rollers to guide the
multi-storey levels with an additional
level at the picking side. stored goods.
order-picking level or tunnel.

Further information
i on request

D32
 Pallet live storage racking

Live storage and push-back racking

Pallet live storage

The live storage racking consists of gravity roller tracks, which are
built as flow beds in a shelf. Because several channels lie next to
each other and the room height is optimally used, an economic
degree of space use has been achieved. The picking and replenishing
sides are separate, the roller tracks control and guide the transport
of the pallets.

Push-back racking
Pallet push-back racking are space-saving buffer storage with just one
service aisle. Here, the stored goods are being pushed with the fork
lift truck against the inclination of the roller track into a channel. When
order picking, the stacker slows the following pallets down. As a result
of the omission of break rollers and separators an economical solution
arises. All articles are always available on the picking side of the rack.
Pallet push-back racking works according to the LiFo principle (Last-in-
First-out).

Pallet live storage with order picking tunnel

Pallet live storage racking becomes a ever more important component
of storage logistics, since the connection from buffer storage and
order picking is been realized consistently. Live storage racking with
order picking tunnel follows the FiFo principle (First-in-First-out), supply
and order picking channels are separated, large goods handling
volumes are possible. These are optimal conditions for applications
e. g. in the beverage trade or for electrical appliance manufacturers.

D33
 PALLET RACKING SYSTEMS

High rise racking, narrow aisle system

High rise, narrow aisle racking facili- safety equipment and fire regulation
tates very high density storage, even authorities. This ultimately means
when actual floor area is limited. that we can provide a first class
service to our customers.
SSI SCHAEFER systems have been
used all over the world in countless SSI SCHAEFER is a professional
applications. SSI SCHAEFER has systems service provider.
years of experience in this field
and is working in co-operation with
manufacturers of floors, cranes,

Further information
i on request

D34
 High rise racking

High rise racking operation

Narrow aisle system with order picker (Man-up)

This type of storage system is used most frequently.
The advantages are:
- The operator is always on picking height, no positioning
aid is necessary.
- Pallet order picking is possible.

Narrow aisle system with order picker (Man-down)

This type of storage system is used, if only complete
pallets are being picked and replenished. Compared to
Man-up devices, closer tolerances are to be considered
for floor and shelf and positioning aids in horizontal
as well as vertical direction are necessary for larger
racking heights.

Narrow aisle system with order picker (Man-up)

and top guiding rail
This additional, upper guiderail with integrated electrical
rail permits large racking heights (to 19 m) and racking
lengths (> 100 m) with high driving speeds. An important
factor is the maintaining of very close floor and shelf
tolerances, in order to ensure perfect functioning.

D35