We make it possible!
3/20/2003 1
We make it possible!
3/20/2003 2
ESAB SubArc Products
Suitable welding equipments
Roof of the tank
A2 Multitrac or A6 Mastertrac
Girth joints of the tank
A2 or A6 Circotech
Vertical joints of the tank
Railtrac FW or FWR
Bottom of the tank
A2 Multitrac or A6 Mastertrac
Circotech
3/20/2003 3
1
ESAB SubArc Products
A2 Multitrac A6 Mastertrac
3/20/2003 4
ESAB SubArc Products
Circotech
3/20/2003 5
ESAB SubArc Products
Railtrac FW 1000
3/20/2003 6
2
ESAB SubArc Products
Storage Tank
Minimum diameter for inner
respective outer welds: 8m
Plate thickness, minimum: 8 mm
maximum: 35 mm
Plate height, minimum: 1000 mm
maximum: 3000 mm
(can be used up to plate height 4100 mm with help
of the accessories to extend the frame)
Minimum distance between
double shell storage tank: 1500 mm
(Possible to come down to a minimum distance of
1000 mm with help of a narrow cabin)
Circotech
3/20/2003 7
ESAB SubArc Products
Technical data
Weights Singel Double
Complete unit, A2 ready to operate: 745 kg 1340 kg
Complete unit, A6 ready to operate: 765 kg 1380 kg
Max. load incl. operator/each
cabin at 10-times safety ratio: 300 kg
Wind speed maximum; 14 m/sec
Circotech
3/20/2003 8
ESAB SubArc Products
Circotech
3/20/2003 9
3
ESAB SubArc Products
Circotech
3/20/2003 10
ESAB SubArc Products
Circotech
3/20/2003 11
ESAB SubArc Products
Circotech
3/20/2003 12
4
ESAB SubArc Products
Circotech
3/20/2003 13
ESAB SubArc Products
PEH Canvas 3-sides
Circotech
3/20/2003 14
ESAB SubArc Products
Single Circotech
When using OPC flux recovery system
upper platform is required
Double sided Circotech
When using double sided Circotech is
required 2 upper platforms (for each side)
and the carriage balcony
Circotech
3/20/2003 15
5
ESAB SubArc Products
Lifting the Circotech on to the storage tank
Lift up the Circotech by lifting crane.
Circotech
3/20/2003 16
ESAB SubArc Products
Vertical welds
Manually or with Railtrac FW 1000
3/20/2003 17
We make it possible!
3/20/2003 18
