Pressure Relief Valve
Model: SRV250
Set Pressure Range: 25-450 psig
Set Pressure Tolerance: 2 psig up to and including 70 psig, 3% of set pressure greater
than 70 psig. As required in paragraph UG-134(d)(1) of the ASME
Boiler & Pressure Vessel Code Sec. VIII Div. 1.
Seat Leakage: Bubble Tight within 5 psig for set pressure 50 psig or less
Bubble Tight within 10% for set pressure greater than 50 psig
As required in paragraph 2.2.3 of API 527.
Flow Factor (Slope Method): 0.74
Operating Temperature Range: -65 to 400F
Materials of Construction:
Seat, Cap, Piston: ASTM B16 Brass or ASTM A582 Stainless
Spring: 17-7 Stainless Steel
Seal: Silicone, Viton or EPDM
Valve Weight: 0.10 lbm
Valve Options:
Valve Material: ASTM B16 Brass or ASTM A582 Stainless
Compliance with European PED 2014/68/EU, “CE” Stamp
Compliance with UK PESR SI 2016 no. 1105 as amended, “ ” Stamp
Seal: Silicone (25-350 psig @ -65 to 400F) or Viton (25-450 psig @ -15 to 400F)
High Pressure Setting 351-450 psi (Valve Weight 0.11 lbm)
Plating: Nickel Plating
Inlet NPT Sizes: 1/8 NPT or BSPT
1/4 NPT, BSPT, or BSPP
3/8 NPT, BSPT, or BSPP
Certifications:
ASME Boiler & Pressure Vessel Code Section VIII Division 1
CSA B51-03 Boiler, Pressure, Vessel, and Pressure Piping Code
Ordering Information
SRV250 - 1/4 - BSPT - SS - V - CE - SC - SST - 150
Construction Pressure
Connection Size Connection Type Seal Material Optional Code Serialized Thread Sealant
Material Setting
Option Code Option Code Option Code Option Code Option Code Option Code Option Code
1/8” 1/8 NPT (Blank) Brass (Blank) Silicone (Blank) None (Blank) None (Blank) None (Blank)
Nickel
1/4" 1/4 BSPT BSPT NP Viton® V CE Mark CE Serialized SC White SST
Plated
Stainless Non-
3/8” 3/8” SS NC
Steel Code
Options
1. Connection Size: The available sizes are 1/8”, 1/4”, or 3/8”.
2. Connection Type
a. NPT – Pipe Threads made to the ASME B1.20.1 Standard
b. BSPT – Pipe Threads made to the ISO 7-1 Standard
c. BSPP – Pipe Threads made to the ISO 7-1 Standard
3. Construction Material
a. Brass
b. Nickel Plated – Electroless Nickel Plated Brass
c. Stainless Steel
4. Seal Material
a. Silicone
b. Viton®
c. EPDM
5. Optional Code
a. None: Will meet the requirements of ASME BPV Code Section VIII Division 1.
b. CE/UKCA Mark: Valve has the “CE/UKCA” certification for the European PED and UK PESR.
c. Non-Code: For valves with a pressure setting below 25 psi.
6. Serialized Valves: Have a unique serial number and include certificate.
7. Thread Sealant
a. White colored thread sealant
Examples:
1. A 1/4” NPT brass valve with a silicone seal set 200 psi is SRV250-1/4-200.
2. A 1/8” BSPT brass valve with a Viton seal and white thread sealant set at 100 psi is SRV250-1/8-BSPT-V-SST-100.
SRV250 FLOW CAPACITY
SETTING (PSI) SCFM SETTING (PSI) SCFM SETTING (PSI) SCFM
25 31 170 149 315 267
30 35 175 153 320 271
35 39 180 157 325 275
40 43 185 161 330 279
45 47 190 165 335 283
50 51 195 169 340 287
55 55 200 173 345 291
60 59 205 177 350 295
65 63 210 181 355 299
70 67 215 185 360 303
75 71 220 189 365 307
80 75 225 194 370 312
85 80 230 198 375 316
90 84 235 202 380 320
95 88 240 206 385 324
100 92 245 210 390 328
105 96 250 214 395 332
110 100 255 218 400 336
115 104 260 222 405 340
120 108 265 226 410 344
125 112 270 230 415 348
130 116 275 234 420 352
135 120 280 238 425 356
140 124 285 242 430 360
145 128 290 246 435 364
150 132 295 251 440 369
155 137 300 255 445 373
160 141 305 259 450 377
165 145 310 263
