Packet Tracer - Configure Router Interfaces
Addressing Table
Device Interface IP Address/Prefix Default Gateway
R1 G0/0 172.16.20.1 /25 N/A
R1
G0/1 172.16.20.129 /25 N/A
R1
S0/0/0 209.165.200.225 /30 N/A
PC1 NIC 172.16.20.10 /25 172.16.20.1
PC2 NIC 172.16.20.138 /25 172.16.20.129
R2 G0/0 2001:db8:c0de:12::1/64 N/A
R2
G0/1 2001:db8:c0de:13::1/64 N/A
R2
S0/0/1 2001:db8:c0de:11::1/64 N/A
R2 S0/0/1
fe80::2 N/A
PC3 NIC 2001:db8:c0de:12::a/64 fe80::2
PC4 NIC 2001:db8:c0de:13::a/64 fe80::2
Blank Line - no additional information
Objectives
Part 1: Configure IPv4 Addressing and Verify Connectivity
Part 2: Configure IPv6 Addressing and Verify Connectivity
Background
Routers R1 and R2 each have two LANs. Your task is to configure the appropriate addressing on each device
and verify connectivity between the LANs.
Note: The user EXEC password is cisco. The privileged EXEC password is class.
Instructions
Part 1: Configure IPv4 Addressing and Verify Connectivity
Step 1: Assign IPv4 addresses to R1 and LAN devices.
Referring to the Addressing Table, configure IP addressing for R1 LAN interfaces, PC1 and PC2. The serial
interface has already configured.
LAN 1:
2013 - 2024 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 1 of 6 www.netacad.com
Packet Tracer - Configure Router Interfaces
LAN 2:
2013 - 2024 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 2 of 6 www.netacad.com
Packet Tracer - Configure Router Interfaces
Step 2: Verify connectivity.
PC1 and PC2 should be able to ping each other and the Dual Stack Server.
2013 - 2024 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 3 of 6 www.netacad.com
Packet Tracer - Configure Router Interfaces
Part 2: Configure IPv6 Addressing and Verify Connectivity
Step 1: Assign IPv6 addresses to R2 and LAN devices.
Referring to the Addressing Table, configure IP addressing for R2 LAN interfaces, PC3 and PC4. The serial
interface is already configured.
LAN 3:
2013 - 2024 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 4 of 6 www.netacad.com
Packet Tracer - Configure Router Interfaces
LAN 4:
2013 - 2024 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 5 of 6 www.netacad.com
Packet Tracer - Configure Router Interfaces
Step 2: Verify connectivity.
PC3 and PC4 should be able to ping each other and the Dual Stack Server.
End of document
2013 - 2024 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 6 of 6 www.netacad.com
