PHOTOELECTRIC SMOKE DETECTORS
SD SERIES
Features
• Two and four wire models
• Photoelectric smoke sensing technology
• Uses smoke sensor in conjunction with a fixed temperature
heat sensor to extend reliability
• Durable sensor head, no need for replacement
• Remote LED output on select 2-wire models
• N/C (normal close) or N/O (normal open) selectable relay
output
• Easy installation and maintenance
• Attractive sleek housing
• UL listed
Description Installation Diagram
The SD Series photoelectric smoke detectors are engineered to
meet strict UL fire safety codes and effectively respond to a wide
spectrum of fires. The SD Series smoke detectors are suitable
for use in commercial, industrial, institutional and residential
occupancies. The sleek low-profile design of the detectors
emphasizes ease of installation and field maintenance.
The SD Series consists of four models:
SW-2WP-LED / SD-2WT-LED
The SD-2WP-LED is a two-wire photoelectric smoke detector
for use with electrically compatible fire alarm control units.
The SD-2WT-LED is a two-wire smoke detector that uses
photoelectric technology in conjunction with a fixed temperature
heat sensor to further extend its sensing capabilities.
SD-2WP-LED and SD-2WT-LED are available with a remote
LED output.
SD-4WP / SD-4WT
The SD-4WP is a four-wire photoelectric smoke detector. The
SD-4WT is a four-wire photoelectric smoke detector with a fixed
temperature heat sensor.
All SD Series smoke detectors come equipped with a sleek
low-profile design and durable sensor head. Utilizing advanced
detection and discrimination algorithms, the SD Series smoke
detectors provide quality and reliability.
CATALOG NUMBER
5357
NOT TO BE USED FOR INSTALLATION PURPOSES.
THIS INFORMATION IS FOR MARKETING PURPOSES ONLY AND
NOT INTENDED TO DESCRIBE THE PRODUCTS TECHNICALLY.
Electrical Specifications
Standby Alarm Surge Star-Up Permissible
Heat Voltage Alarm
Model 2/4 wire Current Current Current Time Current Frequency
Sensor DC contact
(Max.) (Max.) (Max.) (Max.) (Max.)
SD-4WT 4 135°F 12/24V 370μA 35mA 60 Seconds 80mA 3-5 Seconds Form A
SD-4WP 4 12/24V 370μA 35mA 60 Seconds 80mA 3-5 Seconds Form A
SD-2WT-LED 2 135°F 12~28V 150μA 70mA 160μA 60 Seconds 80mA 3-5 Seconds —
SD-2WP-LED 2 12~28V 150μA 70mA 160μA 60 Seconds 80mA 3-5 Seconds —
Smoke Sensitivity 2.66+/- 1.11% FT Obscuration (UL standard)
Detection Range 50 foot rating for heat sensor
Start-Up Current 70 µA Maximum
Alarm Impedance For 2-wire models: 100Ω+3V max; 560Ω+3V max (red LED open circuit)
Reset Voltage Less than 1 volt
Reset Time Less than 1 sec
Alarm Indicator Continuously emitting red light
Temperature range -10°C to 50°C
Humidity 0 to 95% RH, non condensing
Alarm Contact For 4-wire: N/O or N/C Operation
Form A: 1.0A@30VDC/0.5A@125VAC
Dimensions 10mm (dia) x 46mm (ht) with base
Weight 130g/set with base
Ordering Information
Model Description
SD-2WP-LED 2-wire photoelectric smoke detector and remote LED output. Includes 4-inch base
SD-2WT-LED 2-wire photoelectric smoke detector with heat sensor and remote LED output. Includes 4-inch base.
SD-4WP 4-wire photoelectric smoke detector c/w 4-inch base
SD-4WT 4-wire photoelectric smoke detector with heat sensor c/w 4-inch base
This document is provided by Mircom Technologies Ltd., MGC Systems Corp.,
or their affiliates, subsidiaries and brands, for convenience or marketing only and
does not describe products or services technically. For technical information refer
Canada to technical manuals. We do not make representations or warranties regarding
25 Interchange Way Vaughan, ON L4K 5W3 this information, including as to completeness or accuracy. We may change these
Telephone: (905) 660-4655 | Fax: (905) 660-4113 contents at any time and reserve all rights in the contents, including copyrights,
trademarks and other intellectual property.
U.S.A.
4575 Witmer Industrial Estates Niagara Falls, NY 14305
Toll Free: (888) 660-4655 | Fax Toll Free: (888) 660-4113
CAT. 5357
www.mircom.com Rev. 1
