PROD Reg. nr.
7020
EC Type-Examination (module B) Certificate
Directive on Marine Equipment
Certificate No.: 0200-MarED-05230 version 2
This is to certify that: FORCE Certification A/S did undertake the relevant type approval procedures for the type of
equipment identified below which was found to be in compliance with the requirements of Marine Equipment Directive
(MED) 2014/90/EU, subject to any conditions in the appendix attached hereto.
Manufacturer: Stennevad A/S, Lillebæltsvej 1-3, 6715 Esbjerg N, Denmark
Directive Reference: Marine Equipment Directive 2014/90/EU, Regulation (EU) 2023/1667
Product designation:
Number and item designation Regulations of SOLAS 74, as amended, and the relevant Testing standard
resolutions and circulars of the IMO, as applicable
MED/3.5 Type approval requirements EN 659:2003
Fire- t: gloves - SOLAS 74 Reg. II-2/10 +A1:2008
Row 1 of 1 - SOLAS 74 Reg. X/3 +AC:2009
- IMO Res. MSC.98(73)-(FSS Code) 3
Carriage and performance requirements
- SOLAS 74 Reg. II-2/10
- SOLAS 74 Reg. II-2/15
- IMO Res. MSC.4(48)-(IBC Code) 11
- IMO Res. MSC.5(48)-(IGC Code) 11
- IMO Res. MSC.36(63)-(1994 HSC Code) 7
- IMO Res. MSC.97(73)-(2000 HSC Code) 7
- IMO Res. MSC.98(73)-(FSS Code) 3
The attached appendix forms a part of this certificate. Documentation for observance of relevant requirements and
the basis for the type-examination are described in the appendix to this certificate. This certificate will remain valid
unless suspended, expired or withdrawn, provided the conditions in the attached appendix are complied with. The
manufacturer shall inform FORCE Certification A/S of any contemplated changes.
This certificate replaces the former version 1 due to renewal.
Existing products conforming to the prevoius version of this certificate remain valid.
Date of issue [yyyy-mm-dd]: 2023-12-20
Date of expiry [yyyy-mm-dd]: 2028-12-20
Allan Laursen Kasper Munk Eliasen
Certification Manager Examiner
FORCE Certification A/S task No.: 123-34791 / Certificate ID: 0200-MarED-05230-2
Note 1: The certificate will not be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been
notified to, and agreed with the notified body named on this certificate.
Note 2: Should the specified regulations or standards be amended during the validity of this certificate, the product(s) is/are to be reapproved
prior to it/they being placed on board vessels to which the amended regulations or standards apply.
Note 3: The Mark of Conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity may
only be issued when the production-control phase module (D, E or F) of ANNEX B of the Directive is fully complied with and controlled by a written
inspection agreement with a notified body.
Note 4: Status of this certificate can be verified on www.forcecertification.com. This EU Type-Examination Certificate is the property of FORCE
Certification A/S. Extracts of this certificate may only be reproduced with a written permission from FORCE Certification A/S.
[email protected] www.forcecertification.com
