Data sheet 3RW3036-1BB04
SIRIUS soft starter S2 45 A, 22 kW/400 V, 40 °C 200-480 V AC, 24
V AC/DC Screw terminals
General technical data
product brand name SIRIUS
product feature
● integrated bypass contact system Yes
● thyristors Yes
product function
● intrinsic device protection No
● motor overload protection No
● evaluation of thermistor motor protection No
● external reset No
● adjustable current limitation No
● inside-delta circuit No
product component motor brake output No
insulation voltage rated value V 600
degree of pollution 3, acc. to IEC 60947-4-2
reference code according to EN 61346-2 Q
reference code according to DIN 40719 extended according G
to IEC 204-2 according to IEC 750
Power Electronics
product designation Soft starter
operational current
● at 40 °C rated value A 45
● at 50 °C rated value A 42
● at 60 °C rated value A 39
yielded mechanical performance for 3-phase motors
● at 230 V
— at standard circuit at 40 °C rated value kW 11
● at 400 V
— at standard circuit at 40 °C rated value kW 22
yielded mechanical performance [hp] for 3-phase AC motor hp 10
at 200/208 V at standard circuit at 50 °C rated value
operating frequency rated value Hz 50 ... 60
relative negative tolerance of the operating frequency % -10
relative positive tolerance of the operating frequency % 10
operating voltage at standard circuit rated value V 200 ... 480
relative negative tolerance of the operating voltage at % -15
standard circuit
relative positive tolerance of the operating voltage at % 10
standard circuit
minimum load [%] % 10
continuous operating current [% of Ie] at 40 °C % 115
3RW30361BB04 Subject to change without notice
7/5/2023
Page 1/5 © Copyright Siemens
power loss [W] at operational current at 40 °C during W 6
operation typical
Control circuit/ Control
type of voltage of the control supply voltage AC/DC
control supply voltage frequency 1 rated value Hz 50
control supply voltage frequency 2 rated value Hz 60
relative negative tolerance of the control supply voltage % -10
frequency
relative positive tolerance of the control supply voltage % 10
frequency
control supply voltage 1 at AC
● at 50 Hz rated value V 24
● at 60 Hz rated value V 24
relative negative tolerance of the control supply voltage at % -10
AC at 50 Hz
relative positive tolerance of the control supply voltage at % 10
AC at 50 Hz
relative negative tolerance of the control supply voltage at % -10
AC at 60 Hz
relative positive tolerance of the control supply voltage at % 10
AC at 60 Hz
control supply voltage 1 at DC rated value V 24
relative negative tolerance of the control supply voltage at % -10
DC
relative positive tolerance of the control supply voltage at % 10
DC
display version for fault signal red
Mechanical data
size of engine control device S2
width mm 55
height mm 160
depth mm 170
fastening method screw and snap-on mounting
mounting position With vertical mounting surface +/-10° rotatable, with vertical
mounting surface +/- 10° tiltable to the front and back
required spacing with side-by-side mounting
● upwards mm 60
● at the side mm 30
● downwards mm 40
wire length maximum m 300
number of poles for main current circuit 3
Connections/ Terminals
type of electrical connection
● for main current circuit screw-type terminals
● for auxiliary and control circuit screw-type terminals
number of NC contacts for auxiliary contacts 0
number of NO contacts for auxiliary contacts 1
number of CO contacts for auxiliary contacts 0
type of connectable conductor cross-sections for main
contacts for box terminal using the front clamping point
● solid 2x (1.5 ... 16 mm²)
● finely stranded with core end processing 1.5 ... 25 mm²
● stranded 1.5 ... 35 mm²
type of connectable conductor cross-sections for main
contacts for box terminal using the back clamping point
● solid 2x (1.5 ... 16 mm²)
● finely stranded with core end processing 1.5 ... 25 mm²
● stranded 1.5 ... 35 mm²
type of connectable conductor cross-sections for main
contacts for box terminal using both clamping points
● solid 2x (1.5 ... 16 mm²)
● finely stranded with core end processing 2x (1.5 ... 16 mm²)
● stranded 2x (1.5 ... 25 mm²)
type of connectable conductor cross-sections for AWG
cables for main contacts for box terminal
3RW30361BB04 Subject to change without notice
7/5/2023
Page 2/5 © Copyright Siemens
● using the back clamping point 16 ... 2
● using the front clamping point 18 ... 2
● using both clamping points 2x (16 ... 2)
type of connectable conductor cross-sections for auxiliary
contacts
● solid 2x (0.5 ... 2.5 mm²)
● finely stranded with core end processing 2x (0.5 ... 1.5 mm²)
type of connectable conductor cross-sections for AWG
cables
● for auxiliary contacts 2x (20 ... 14)
● for auxiliary contacts finely stranded with core end 2x (20 ... 16)
processing
Ambient conditions
installation altitude at height above sea level m 5 000
environmental category
● during transport according to IEC 60721 2K2, 2C1, 2S1, 2M2 (max. fall height 0.3 m)
● during storage according to IEC 60721 1K6 (only occasional condensation), 1C2 (no salt mist), 1S2
(sand must not get inside the devices), 1M4
● during operation according to IEC 60721 3K6 (no formation of ice, no condensation), 3C3 (no salt mist),
3S2 (sand must not get into the devices), 3M6
ambient temperature
● during operation °C -25 ... +60
● during storage °C -40 ... +80
derating temperature °C 40
protection class IP on the front according to IEC 60529 IP20
touch protection on the front according to IEC 60529 finger-safe, for vertical contact from the front
Certificates/ approvals
General Product Approval EMC
Confirmation
Declaration of Conformity Test Certificates other
Type Test Certific- Special Test Certific- Confirmation Miscellaneous
ates/Test Report ate
Railway
Confirmation Vibration and Shock
UL/CSA ratings
yielded mechanical performance [hp] for 3-phase AC motor
● at 220/230 V
— at standard circuit at 50 °C rated value hp 15
● at 460/480 V
— at standard circuit at 50 °C rated value hp 30
contact rating of auxiliary contacts according to UL B300 / R300
Further information
Siemens has decided to exit the Russian market (see here).
https://press.siemens.com/global/en/pressrelease/siemens-wind-down-russian-business
Siemens is working on the renewal of the current EAC certificates.
Please contact your local Siemens office on the status of validity of the EAC certification if you intend to import or offer to supply these products to an
EAC relevant market (other than the sanctioned EAEU member states Russia or Belarus).
Simulation Tool for Soft Starters (STS)
https://support.industry.siemens.com/cs/ww/en/view/101494917
3RW30361BB04 Subject to change without notice
7/5/2023
Page 3/5 © Copyright Siemens
Information on the packaging
https://support.industry.siemens.com/cs/ww/en/view/109813875
Information- and Downloadcenter (Catalogs, Brochures,…)
https://www.siemens.com/ic10
Industry Mall (Online ordering system)
https://mall.industry.siemens.com/mall/en/en/Catalog/product?mlfb=3RW3036-1BB04
Cax online generator
http://support.automation.siemens.com/WW/CAXorder/default.aspx?lang=en&mlfb=3RW3036-1BB04
Service&Support (Manuals, Certificates, Characteristics, FAQs,...)
https://support.industry.siemens.com/cs/ww/en/ps/3RW3036-1BB04
Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, EPLAN macros, ...)
http://www.automation.siemens.com/bilddb/cax_de.aspx?mlfb=3RW3036-1BB04&lang=en
3RW30361BB04 Subject to change without notice
7/5/2023
Page 4/5 © Copyright Siemens
1/L1
3/L2
5/L3
A1
14
IN 1
-Q
ON
A2
2/T1
4/T2
6/T3
last modified: 1/16/2022 13 NO
3RW30361BB04 Subject to change without notice
7/5/2023
Page 5/5 © Copyright Siemens
