Sl.

Item Description Quantity Units Estimated Rate

No.
1 2 4 5 6
1.00 Dismantling & removing old damaged lime or cement plaster from walls 561.81 Sqm 40.71
including racking out joints and removing the debris away from work site
within 50m. lead etc. complete as per direction of the Engineer-in-charge.

2.00 Scrapping out old paint / distemper from wall with scrapper, sand papering, 15635.29 Sqm 3.37
washing with soap or soda water including scaffolding charges etc. complete
in all respect as per specification & direction of Engineer-in-Charge.

3.00 Dismantling and removing old damaged floor tile upto required depth 85.72 Sqm 101.79
including stacking the useful materials for re- use and removing the debris
away from work site within 50m. lead etc. complete as per direction of
Engineer-in-charge.

4.00 Providing 12mm thick cement plaster in cement mortar (1:6) in all floors 561.81 Sqm 159.35
finished smooth to out side smooth surface of brick walls after racking out
joints, scrapping & cleaning the surface & finishing the plaster surface
smooth using wooden float only to proper plumbs & level and making
necessary grooves, beads & drip course to give required ornamental finish as
per drawing, watering, curing, scaffolding, screening sand etc. complete with
cost, conveyances, royalties, taxes of all materials and cost of all labour with
T&P, sundries required for the work etc. complete as per specification &
direction of Engineer-in-charge.

1 2 4 5 6
5.00 Providing 6mm thick cement plaster in cement mortar (1:4) to Ceiling of 16.72 Sqm 171.09
Roof Slab, Stairs, Chajjas, shelves, lofts
& other R.C.C. surfaces including deep close chipping, roughening,
scrapping, cleaning the exposed R.C.C. surface finishing smooth, providing
masonry drip course & grooves wherever necessary including watering,
curing, scaffolding etc, complete with cost, conveyances, royalties, taxes of
all materials and cost of all labour with T&P, sundries required for the work,
screening the sand etc. complete as per specification & direction of the
Engineer-in-charge.

6.00 Labour charges for rubbing & cleaning tile flooring including wax polishing 595.11 Sqm 61.42
to give granolithic finished including all cost of labour with T&P required for
the work etc. complete as per direction of Engineer-in-Charge.

7.00 Providing, fitting and fixing of Armstrong wall panelling with 12mm thick 1085.28 Sft 1301.78
OPTRA prepaintined sound proof board (2'X2') (Accoustics), anti-termite
with very high degree of insulation, minimum sound abosorption NRC of
0.99, minimum humidity resistance 99%, fully fire proof, light reflection
>85%, 6mm fire point ply, with G.I. section using required adhesive for good
fixing in butting system for a high degree of durability including all cost,
conveyances, taxes of all materials, cost of labour, T&P, etc. complete in all
respect as per specification and direction of Engineer-in-charge.

8.00 Melamine polishing to wood work with any approved colour, shade 5123.09 Sft 66.96
including sand papering, polishing the surface, cost, conveyances,
taxes of all materials and cost of all labour with T&P etc, complete
as per specification & direction of Engineer-in-charge.

9.00 Taking out door & window shutter & re-fixing the same after necessary 37.02 Sft. 12.50
repair with required nails, screws & other hardware fittings including all cost
of labour, T&P required for the work etc. complete as per the direction of
Engineer-in- charge.

10.00 Supplying, fitting & fixing of Piasal wood paneled shutters (32mm style & 1.94 Sqm 4011.99
18mm panel) of approved quality including fixing the same in proper position
with required hard ware fittings, hinges, cleats etc. including cost,
conveyance, taxes of all materials and cost of all labour with T&P required
for the work etc. complete.
11.00 Supplying, fitting & fixing of 6mm thick plain glass including fixing the 0.87 Sqm 497.87
same in proper position with cost, conveyances, taxes, royalties, cost of all
labour & T&P etc. required for the work etc. complete in all respect as per
specification & direction of the Engineer-in-charge.

1 2 4 5 6
12.00 Providing, fitting & fixing of aluminium false ceiling made out of 334.08 Sqm 1287.52
aluminium frame of approved quality (INDAL / ZINDAL) of ISI mark and
approved thickness with Allmn. Angle at border and allmn. “T” of size
1”x1½ ”, fixing 2’-0” centre to centre inserted with 12mm thick Prelaminated
NOVAPAN board of approved quality & colour, suspended with G.I. wires
including cost of all labour, T&P, cost, conveyance and taxes of all materials
etc. complete.

13.00 Providing fitting and fixing of Digital vitrified floor tiles of size 600mm x 85.72 Sqm 1160.71
600mm x 10mm of approved make & colour with application of polymer
modified cement based water resistance adhesive bed & filling joints with
epoxy grout with approved colour pigment to match the colour of tiles
including watering and curing, cost of all labour, T&P, cost, conveyance and
royalty, taxes of all materials etc. complete in all respect as per direction of
Engineer-in-charge.

14.00 Providing, fitting & fixing of Aluminium door with O.E.L. anodized Al. door 2.11 Sqm 6138.73
section of 9202 as vertical member, 9201 as top member and 9200 as bottom
& middle member and 12mm thick pre-laminated board fixed on door frame
by means of tapered clip No.4660 and the frame to be completed by means of
jointing angle No.1855 including all cost of labour, T&P, hire charges of
drilling machine, cost of all materials, cost of all fixtures etc. complete in all
respect as per specification & direction of Engineer-in-charge.

15.00 Painting two coats with approved plastic emulsion paint over a coat of wall 15635.29 Sqm 143.67
primer to inside surface of walls after cleaning the surface including watering,
curing with cost, conveyance, taxes of all materials, labour, T&P required for
the work etc. complete as per specification & direction of Engineering-in-
charge.

16.00 Painting two coats with approved synthetic enamel paints of approved 737.26 Sqm 150.13
colour, shade to new wood & iron work with cost, conveyances, taxes of all
materials and cost of all labour with T&P etc, complete as per specification &
direction of Engineer in-charge.

Total in Figures

Quoted Rate in Figures Select

Quoted Rate in Words INR Zero Only

TOTAL AMOUNT
Without Taxes
53
22871.29

52690.93

8725.44

89524.42

53
2860.62

36551.66

1412795.80

343042.11

462.75

7783.26
 433.15

53
430134.68

99496.06

12952.72

2246322.11

110684.84

4877331.84

0.00

ro Only
Sl. Item Description Quantity Units Estimated Rate
No.
1.00 Dismantling & removing old damaged lime or cement plaster from walls 561.81 Sqm 40.71
including racking out joints and removing the debris away from work site
within 50m. lead etc. complete as per direction of the Engineer-in-charge.

2.00 Scrapping out old paint / distemper from wall with scrapper, sand papering, 15635.29 Sqm 3.37
washing with soap or soda water including scaffolding charges etc. complete
in all respect as per specification & direction of Engineer-in-Charge.

3.00 Dismantling and removing old damaged floor tile upto required depth 85.72 Sqm 101.79
including stacking the useful materials for re- use and removing the debris
away from work site within 50m. lead etc. complete as per direction of
Engineer-in-charge.

4.00 Providing 12mm thick cement plaster in cement mortar (1:6) in all floors 561.81 Sqm 159.35
finished smooth to out side smooth surface of brick walls after racking out
joints, scrapping & cleaning the surface & finishing the plaster surface
smooth using wooden float only to proper plumbs & level and making
necessary grooves, beads & drip course to give required ornamental finish as
per drawing, watering, curing, scaffolding, screening sand etc. complete with
cost, conveyances, royalties, taxes of all materials and cost of all labour with
T&P, sundries required for the work etc. complete as per specification &
direction of Engineer-in-charge.

5.00 Providing 6mm thick cement plaster in cement mortar (1:4) to Ceiling of 16.72 Sqm 171.09
Roof Slab, Stairs, Chajjas, shelves, lofts
& other R.C.C. surfaces including deep close chipping, roughening,
scrapping, cleaning the exposed R.C.C. surface finishing smooth, providing
masonry drip course & grooves wherever necessary including watering,
curing, scaffolding etc, complete with cost, conveyances, royalties, taxes of
all materials and cost of all labour with T&P, sundries required for the work,
screening the sand etc. complete as per specification & direction of the
Engineer-in-charge.

6.00 Labour charges for rubbing & cleaning tile flooring including wax polishing 595.11 Sqm 61.42
to give granolithic finished including all cost of labour with T&P required for
the work etc. complete as per direction of Engineer-in-Charge.

7.00 Providing, fitting and fixing of Armstrong wall panelling with 12mm thick 1085.28 Sft 1301.78
OPTRA prepaintined sound proof board (2'X2') (Accoustics), anti-termite
with very high degree of insulation, minimum sound abosorption NRC of
0.99, minimum humidity resistance 99%, fully fire proof, light reflection
>85%, 6mm fire point ply, with G.I. section using required adhesive for good
fixing in butting system for a high degree of durability including all cost,
conveyances, taxes of all materials, cost of labour, T&P, etc. complete in all
respect as per specification and direction of Engineer-in-charge.

8.00 Melamine polishing to wood work with any approved colour, shade 5123.09 Sft 66.96
including sand papering, polishing the surface, cost, conveyances,
taxes of all materials and cost of all labour with T&P etc, complete
as per specification & direction of Engineer-in-charge.

9.00 Taking out door & window shutter & re-fixing the same after necessary 37.02 Sft. 12.50
repair with required nails, screws & other hardware fittings including all cost
of labour, T&P required for the work etc. complete as per the direction of
Engineer-in- charge.

10.00 Supplying, fitting & fixing of Piasal wood paneled shutters (32mm style & 1.94 Sqm 4011.99
18mm panel) of approved quality including fixing the same in proper position
with required hard ware fittings, hinges, cleats etc. including cost,
conveyance, taxes of all materials and cost of all labour with T&P required
for the work etc. complete.
11.00 Supplying, fitting & fixing of 6mm thick plain glass including fixing the 0.87 Sqm 497.87
same in proper position with cost, conveyances, taxes, royalties, cost of all
labour & T&P etc. required for the work etc. complete in all respect as per
specification & direction of the Engineer-in-charge.

12.00 Providing, fitting & fixing of aluminium false ceiling made out of 334.08 Sqm 1287.52
aluminium frame of approved quality (INDAL / ZINDAL) of ISI mark and
approved thickness with Allmn. Angle at border and allmn. “T” of size
1”x1½ ”, fixing 2’-0” centre to centre inserted with 12mm thick Prelaminated
NOVAPAN board of approved quality & colour, suspended with G.I. wires
including cost of all labour, T&P, cost, conveyance and taxes of all materials
etc. complete.

13.00 Providing fitting and fixing of Digital vitrified floor tiles of size 600mm x 85.72 Sqm 1160.71
600mm x 10mm of approved make & colour with application of polymer
modified cement based water resistance adhesive bed & filling joints with
epoxy grout with approved colour pigment to match the colour of tiles
including watering and curing, cost of all labour, T&P, cost, conveyance and
royalty, taxes of all materials etc. complete in all respect as per direction of
Engineer-in-charge.

14.00 Providing, fitting & fixing of Aluminium door with O.E.L. anodized Al. door 2.11 Sqm 6138.73
section of 9202 as vertical member, 9201 as top member and 9200 as bottom
& middle member and 12mm thick pre-laminated board fixed on door frame
by means of tapered clip No.4660 and the frame to be completed by means of
jointing angle No.1855 including all cost of labour, T&P, hire charges of
drilling machine, cost of all materials, cost of all fixtures etc. complete in all
respect as per specification & direction of Engineer-in-charge.

15.00 Painting two coats with approved plastic emulsion paint over a coat of wall 15635.29 Sqm 143.67
primer to inside surface of walls after cleaning the surface including watering,
curing with cost, conveyance, taxes of all materials, labour, T&P required for
the work etc. complete as per specification & direction of Engineering-in-
charge.

16.00 Painting two coats with approved synthetic enamel paints of approved 737.26 Sqm 150.13
colour, shade to new wood & iron work with cost, conveyances, taxes of all
materials and cost of all labour with T&P etc, complete as per specification &
direction of Engineer in-charge.
TOTAL AMOUNT
Without Taxes
22871.29

52690.93

8725.44

89524.42

2860.62

36551.66

1412795.80

343042.11

462.75

7783.26
 433.15

430134.68

99496.06

12952.72

2246322.11

110684.84
Sl. Item Description Quantity Units Estimated Rate
No.
15.00 Painting two coats with approved plastic emulsion paint over a coat of wall 15635.29 Sqm 144
primer to inside surface of walls after cleaning the surface including watering,
curing with cost, conveyance, taxes of all materials, labour, T&P required for
the work etc. complete as per specification & direction of Engineering-in-
charge.
7.00 Providing, fitting and fixing of Armstrong wall panelling with 12mm thick 1085.28 Sft 1302
OPTRA prepaintined sound proof board (2'X2') (Accoustics), anti-termite
with very high degree of insulation, minimum sound abosorption NRC of
0.99, minimum humidity resistance 99%, fully fire proof, light reflection
>85%, 6mm fire point ply, with G.I. section using required adhesive for good
fixing in butting system for a high degree of durability including all cost,
conveyances, taxes of all materials, cost of labour, T&P, etc. complete in all
respect as per specification and direction of Engineer-in-charge.

12.00 Providing, fitting & fixing of aluminium false ceiling made out of 334.08 Sqm 1288
aluminium frame of approved quality (INDAL / ZINDAL) of ISI mark and
approved thickness with Allmn. Angle at border and allmn. “T” of size
1”x1½ ”, fixing 2’-0” centre to centre inserted with 12mm thick Prelaminated
NOVAPAN board of approved quality & colour, suspended with G.I. wires
including cost of all labour, T&P, cost, conveyance and taxes of all materials
etc. complete.

8.00 Melamine polishing to wood work with any approved colour, shade 5123.09 Sft 67
including sand papering, polishing the surface, cost, conveyances,
taxes of all materials and cost of all labour with T&P etc, complete
as per specification & direction of Engineer-in-charge.

16.00 Painting two coats with approved synthetic enamel paints of approved 737.26 Sqm 150
colour, shade to new wood & iron work with cost, conveyances, taxes of all
materials and cost of all labour with T&P etc, complete as per specification &
direction of Engineer in-charge.

13.00 Providing fitting and fixing of Digital vitrified floor tiles of size 600mm x 85.72 Sqm 1161
600mm x 10mm of approved make & colour with application of polymer
modified cement based water resistance adhesive bed & filling joints with
epoxy grout with approved colour pigment to match the colour of tiles
including watering and curing, cost of all labour, T&P, cost, conveyance and
royalty, taxes of all materials etc. complete in all respect as per direction of
Engineer-in-charge.

4.00 Providing 12mm thick cement plaster in cement mortar (1:6) in all floors 561.81 Sqm 159
finished smooth to out side smooth surface of brick walls after racking out
joints, scrapping & cleaning the surface & finishing the plaster surface
smooth using wooden float only to proper plumbs & level and making
necessary grooves, beads & drip course to give required ornamental finish as
per drawing, watering, curing, scaffolding, screening sand etc. complete with
cost, conveyances, royalties, taxes of all materials and cost of all labour with
T&P, sundries required for the work etc. complete as per specification &
direction of Engineer-in-charge.

2.00 Scrapping out old paint / distemper from wall with scrapper, sand papering, 15635.29 Sqm 3
washing with soap or soda water including scaffolding charges etc. complete
in all respect as per specification & direction of Engineer-in-Charge.

6.00 Labour charges for rubbing & cleaning tile flooring including wax polishing 595.11 Sqm 61
to give granolithic finished including all cost of labour with T&P required for
the work etc. complete as per direction of Engineer-in-Charge.

1.00 Dismantling & removing old damaged lime or cement plaster from walls 561.81 Sqm 41
including racking out joints and removing the debris away from work site
within 50m. lead etc. complete as per direction of the Engineer-in-charge.

14.00 Providing, fitting & fixing of Aluminium door with O.E.L. anodized Al. door 2.11 Sqm 6139
section of 9202 as vertical member, 9201 as top member and 9200 as bottom
& middle member and 12mm thick pre-laminated board fixed on door frame
by means of tapered clip No.4660 and the frame to be completed by means of
jointing angle No.1855 including all cost of labour, T&P, hire charges of
drilling machine, cost of all materials, cost of all fixtures etc. complete in all
respect as per specification & direction of Engineer-in-charge.

3.00 Dismantling and removing old damaged floor tile upto required depth 85.72 Sqm 102
including stacking the useful materials for re- use and removing the debris
away from work site within 50m. lead etc. complete as per direction of
Engineer-in-charge.
10.00 Supplying, fitting & fixing of Piasal wood paneled shutters (32mm style & 1.94 Sqm 4012
18mm panel) of approved quality including fixing the same in proper position
with required hard ware fittings, hinges, cleats etc. including cost,
conveyance, taxes of all materials and cost of all labour with T&P required
for the work etc. complete.

5.00 Providing 6mm thick cement plaster in cement mortar (1:4) to Ceiling of 16.72 Sqm 171
Roof Slab, Stairs, Chajjas, shelves, lofts & other R.C.C. surfaces including
deep close chipping, roughening, scrapping, cleaning the exposed R.C.C.
surface finishing smooth, providing masonry drip course & grooves wherever
necessary including watering, curing, scaffolding etc, complete with cost,
conveyances, royalties, taxes of all materials and cost of all labour with T&P,
sundries required for the work, screening the sand etc. complete as per
specification & direction of the Engineer-in-charge.

9.00 Taking out door & window shutter & re-fixing the same after necessary 37.02 Sft. 13
repair with required nails, screws & other hardware fittings including all cost
of labour, T&P required for the work etc. complete as per the direction of
Engineer-in- charge.

11.00 Supplying, fitting & fixing of 6mm thick plain glass including fixing the 0.87 Sqm 498
same in proper position with cost, conveyances, taxes, royalties, cost of all
labour & T&P etc. required for the work etc. complete in all respect as per
specification & direction of the Engineer-in-charge.
TOTAL AMOUNT
Without Taxes
2246322 22.5 46.06%

1412796 14.1 28.97%

430135 4.3 8.82%

343042 3.4 7.03%

110685 1.1 2.27%

99496 1.0 2.04%

89524 0.9 1.84%

52691 0.5 1.08%

36552 0.4 0.75%

22871 0.2 0.47%

12953 0.1 0.27%

8725 0.1 0.18%

 7783 0.1 0.16%

2861 0.0 0.06%

463 0.0 0.01%

433 0.0 0.01%

₹ 4,877,332 48.77 100.00%