TO: Jt. GM, Project Coordinator, Attn: Mr.

Debashish Gupta,Mecon Limited, Ranchi E-ma

With six (6) copies
enclosures

JT.GM (Steel)
CC: Attn: Mr. Ramesh Kumar Shetty B,[email protected]
Only Intimation
brkshe
E--
HOD-Steel Deptt. mail:
NMDC H.O.,Hyderabad Attn.:
E-mail:
CC: Jt. GM (Metallurgy) Nagarnar Site Mr. S.K. [email protected]
With four (4)
chaurasi
copies
Office NMDC Ltd of enclosures

FROM: B. D. GhoshDirector-ProjectsMACO Corproration

REF:(India)NMDC
Pvt. [email protected]
CRCL Equipment / Facilities (Package No.16C) fo
Reg: NISP. LAC No.HO (Contracts)/ NISP/CRCL-Eqpt/568/125/237
dt. 26.12.2018
Submission of Drawing List & Dwg Title /Cover Sheet

Our Ref: MACO/ MECON/NMDC-CRCL/PKG-16C/001 Date: 21-02-2019 Pages: 2

Your comments e-mail transmittal No. 11 R2 Q6QZ LAB EQPT-16C MEC-MACO 16-02-19, 2019 for inclus
Nos. a. to g. on the Drawing List submitted vide our e-mail email dated 11/02/2019 have been duly incorpo
pleased to submit herewith requisite copies of following document to concerned Offices for y
1. Consolidated drawing List of all Consortium partners covering all the Laboratory equipmen
NMDC/MACO/16C/00
2. Title
It may please be noted that we have not included any Dwg for “Installation requisite for all the equipmen
most of the required details would likely be covered in dwgs
Should it be felt to include this dwg in the dwg List, It could be done as may be required in due course of tim
send back the approved dwgs List asap to enable us to submit all other dwgs in a p
Thank
For Maco Corpor
B.D. Ghosh

Copy to 1) Mr Biswanath Mukherjee, Area Manager, AIM

2) Mr. R. Srinivasan, Spect
3) Mr.P.K.Pathak, Sr. General manager, Insmart S
 NMDC LIMITED
CENTRAL RESEARCH & CONTROL LABORATORY EQUIPM

LIST OF DRAWINGS & NUMBERING SY

NMDC/MACO/16C/00/01/BE/0001 Rev-00

Sr. No. NMDC Dwg No. Contractor Dwg No.

MACO DRGS
1 NMDC/MACO/16C/00/01/BE/0001 MACO-NMDC-CRCL-16C-BE-000-001 List of Drawings & Num
2 NMDC/MACO/16C/00/00/BE/0002 MACO-NMDC-CRCL-16C-BE-000-002 Implementation Schedu
3 NMDC/MACO/16C/00/01/BE/0003 MACO-NMDC-CRCL-16C-BE-000-003 Layout of equipments i
4 NMDC/MACO/16C/00/01/BE/0004 MACO-NMDC-CRCL-16C-BE-003-004 Technical Datasheet / C
spectrometer
5 NMDC/MACO/16C/00/01/BE/0005 MACO-NMDC-CRCL-16C-BE-004-005 Technical Datasheet / C
6 NMDC/MACO/16C/00/01/BE/0006 MACO-NMDC-CRCL-16C-BE-005-006 Technical Datasheet / C
(vertical and oscillating
7 NMDC/MACO/16C/00/01/BE/0007A MACO-NMDC-CRCL-16C-BE-008-007A Technical Datasheet / C
8 NMDC/MACO/16C/00/01/DE/0007B MACO-NMDC-CRCL-16C-DE-008-007B GA of Melting and cast
9 NMDC/MACO/16C/00/01/BE/0008 MACO-NMDC-CRCL-16C-BE-011-008 Technical Datasheet / C
10 NMDC/MACO/16C/00/01/BE/0009 MACO-NMDC-CRCL-16C-BE-012-009 Technical Datasheet / C
11 NMDC/MACO/16C/00/01/BE/0010 MACO-NMDC-CRCL-16C-BE-013-010 Technical Datasheet / C
12 NMDC/MACO/16C/00/01/BE/0011 MACO-NMDC-CRCL-16C-BE-015-011 Technical Datasheet / C
EDS & EBSD
13 NMDC/MACO/16C/00/01/BE/0012 MACO-NMDC-CRCL-16C-BE-016-012 Technical Datasheet / C
analyser including micr
14 NMDC/MACO/16C/00/01/BE/0013 MACO-NMDC-CRCL-16C-BE-017-013 Technical Specification
15 NMDC/MACO/16C/00/01/BE/0014A MACO-NMDC-CRCL-16C-BE-030-014A Technical Datasheet / C

16 NMDC/MACO/16C/00/01/DE/0014B MACO-NMDC-CRCL-16C-DE-030-014B GA of Universal sheet m

17 NMDC/MACO/16C/00/01/BE/0015A MACO-NMDC-CRCL-16C-BE-031-015A Technical Datasheet / C

18 NMDC/MACO/16C/00/01/DE/0015B MACO-NMDC-CRCL-16C-DE-031-015B GA of Furnace for strai

19 NMDC/MACO/16C/00/01/BE/0016A MACO-NMDC-CRCL-16C-BE-032-016A Technical Datasheet / C

20 NMDC/MACO/16C/00/01/DE/0016B MACO-NMDC-CRCL-16C-DE-032-016B GA of Furnace for strai

21 NMDC/MACO/16C/00/01/BE/0017A MACO-NMDC-CRCL-16C-BE-033-017A Technical Datasheet / C
 22 NMDC/MACO/16C/00/01/DE/0017B MACO-NMDC-CRCL-16C-DE-033-017B GA of Furnace for heat
23 NMDC/MACO/16C/00/01/BE/0018A MACO-NMDC-CRCL-16C-BE-034-018A Technical Datasheet / C
(for corrosion testing of
24 NMDC/MACO/16C/00/01/DE/0018B MACO-NMDC-CRCL-16C-DE-034-018B GA of Salt spray chamb
rolled coil )

NMDC LIMITED
CENTRAL RESEARCH & CONTROL LABORATORY EQUIPM

LIST OF DRAWINGS & NUMBERING SY

NMDC/MACO/16C/00/01/BE/0001 Rev-00

Sr. No. NMDC Dwg No. Contractor Dwg No.

25 NMDC/MACO/16C/00/01/BE/0019A MACO-NMDC-CRCL-16C-BE-035-019A Technical Datasheet / C
26 NMDC/MACO/16C/00/01/DE/0019B MACO-NMDC-CRCL-16C-DE-035-019B GA of Quenching tank
27 NMDC/MACO/16C/00/01/BE/0020 MACO-NMDC-CRCL-16C-BE-037-020 Technical Datasheet / C
28 NMDC/MACO/16C/00/01/BE/0021 MACO-NMDC-CRCL-16C-BE-038-021 Technical Datasheet / C
for steel sample cutting
29 NMDC/MACO/16C/00/01/BE/0022 MACO-NMDC-CRCL-16C-BE-039-022 Technical Datasheet / C
30 NMDC/MACO/16C/00/01/BE/0023 MACO-NMDC-CRCL-16C-BE-040-023 Technical Datasheet / C
machine
31 NMDC/MACO/16C/00/01/BE/0024 MACO-NMDC-CRCL-16C-BE-041-024 Technical Datasheet / C
32 NMDC/MACO/16C/00/01/BE/0025 MACO-NMDC-CRCL-16C-BE-042-025 Technical Datasheet / C
33 NMDC/MACO/16C/00/01/BE/0026 MACO-NMDC-CRCL-16C-BE-043-026 Technical Datasheet / C
34 NMDC/MACO/16C/00/01/BE/0027 MACO-NMDC-CRCL-16C-BE-044-027 Technical Datasheet / C
35 NMDC/MACO/16C/00/01/BE/0028 MACO-NMDC-CRCL-16C-BE-045-028 Technical Datasheet / C
36 NMDC/MACO/16C/00/01/BE/0029 MACO-NMDC-CRCL-16C-BE-046-029 Technical Datasheet / C
37 NMDC/MACO/16C/00/01/BE/0030 MACO-NMDC-CRCL-16C-BE-047-030 Technical Datasheet / C
cutter)
38 NMDC/MACO/16C/00/01/BE/0031 MACO-NMDC-CRCL-16C-BE-048-031 Technical Datasheet / C
39 NMDC/MACO/16C/00/01/BE/0032 MACO-NMDC-CRCL-16C-BE-049-032 Technical Datasheet / C
40 NMDC/MACO/16C/00/01/BE/0033 MACO-NMDC-CRCL-16C-BE-050-033 Technical Datasheet / C
41 NMDC/MACO/16C/00/01/BE/0034 MACO-NMDC-CRCL-16C-BE-051-034 Technical Datasheet / C
refractory materials
42 NMDC/MACO/16C/00/01/BE/0035 MACO-NMDC-CRCL-16C-BE-052-035 Technical Datasheet / C
refractory bricks
43 NMDC/MACO/16C/00/01/BE/0036A MACO-NMDC-CRCL-16C-BE-053-036A Technical Datasheet / C
44 NMDC/MACO/16C/00/01/DE/0036B MACO-NMDC-CRCL-16C-DE-053-036B GA of RUL furnace for
45 NMDC/MACO/16C/00/01/BE/0037 MACO-NMDC-CRCL-16C-BE-054-037 Technical Datasheet / C
bricks
46 NMDC/MACO/16C/00/01/BE/0038 MACO-NMDC-CRCL-16C-BE-055-038 Technical Datasheet / C
rupture of refractory bri
47 NMDC/MACO/16C/00/01/BE/0039 MACO-NMDC-CRCL-16C-BE-056-039 Technical Datasheet / C
porosity of refractory br
48 NMDC/MACO/16C/00/01/BE/0040 MACO-NMDC-CRCL-16C-BE-057-040 Technical Datasheet / C
determination of cold c
 NMDC LIMITED
CENTRAL RESEARCH & CONTROL LABORATORY EQUIPM

LIST OF DRAWINGS & NUMBERING SY

NMDC/MACO/16C/00/01/BE/0001 Rev-00

Sr. No. NMDC Dwg No. Contractor Dwg No.

49 NMDC/MACO/16C/00/01/BE/0041A MACO-NMDC-CRCL-16C-BE-058-041A Technical Datasheet / C
range 1700°C to 1800°
50 NMDC/MACO/16C/00/01/DE/0041B MACO-NMDC-CRCL-16C-DE-058-041B GA of High temperature
51 NMDC/MACO/16C/00/01/BE/0042 MACO-NMDC-CRCL-16C-BE-059-042 Technical Datasheet / C
52 NMDC/MACO/16C/00/01/BE/0043 MACO-NMDC-CRCL-16C-BE-060-043 Technical Datasheet / C
53 NMDC/MACO/16C/00/01/BE/0044 MACO-NMDC-CRCL-16C-BE-061-044 Technical Datasheet / C

54 NMDC/MACO/16C/00/01/BE/0045 MACO-NMDC-CRCL-16C-BE-062-045 Technical Datasheet / C

55 NMDC/MACO/16C/00/01/BE/0046 MACO-NMDC-CRCL-16C-BE-064-046 Technical Datasheet / C
56 NMDC/MACO/16C/00/01/BE/0047 MACO-NMDC-CRCL-16C-BE-065-047 Technical Datasheet / C
57 NMDC/MACO/16C/00/01/BE/0048 MACO-NMDC-CRCL-16C-BE-066-048 Technical Datasheet / C
iron ore
58 NMDC/MACO/16C/00/01/BE/0049 MACO-NMDC-CRCL-16C-BE-067-049 Technical Datasheet / C
degradation index (TDI
59 NMDC/MACO/16C/00/01/BE/0050 MACO-NMDC-CRCL-16C-BE-068-050 Technical Datasheet / C
melting characteristics
Technical Datasheet / C
60 NMDC/MACO/16C/00/01/BE/0051 MACO-NMDC-CRCL-16C-BE-069-051 Index (RI) and Reductio
pellets/lumps

61 NMDC/MACO/16C/00/01/BE/0052 MACO-NMDC-CRCL-16C-BE-072-052 Technical Datasheet / C

62 NMDC/MACO/16C/00/01/BE/0053 MACO-NMDC-CRCL-16C-BE-075-053 Technical Datasheet / C
63 NMDC/MACO/16C/00/01/BE/0054 MACO-NMDC-CRCL-16C-BE-076-054 Technical Datasheet / C
petroleum products
64 NMDC/MACO/16C/00/01/BE/0055 MACO-NMDC-CRCL-16C-BE-077-055 Technical Datasheet / C
65 NMDC/MACO/16C/00/01/BE/0056 MACO-NMDC-CRCL-16C-BE-078-056 Technical Datasheet / C
petroleum products
66 NMDC/MACO/16C/00/01/BE/0057 MACO-NMDC-CRCL-16C-BE-079-057 Technical Datasheet / C
67 NMDC/MACO/16C/00/01/BE/0058 MACO-NMDC-CRCL-16C-BE-080-058 Technical Datasheet / C

68 NMDC/MACO/16C/00/01/BE/0059 MACO-NMDC-CRCL-16C-BE-081-059 Technical Datasheet / C

69 NMDC/MACO/16C/00/01/BE/0060 MACO-NMDC-CRCL-16C-BE-082-060 Technical Datasheet / C
of lubricating grease
70 NMDC/MACO/16C/00/01/BE/0061 MACO-NMDC-CRCL-16C-BE-083-061 Technical Datasheet / C
stability of lubricating o

NMDC LIMITED
CENTRAL RESEARCH & CONTROL LABORATORY EQUIPM

LIST OF DRAWINGS & NUMBERING SY

NMDC/MACO/16C/00/01/BE/0001 Rev-00

Sr. No. NMDC Dwg No. Contractor Dwg No.

71 NMDC/MACO/16C/00/01/BE/0062 MACO-NMDC-CRCL-16C-BE-084-062 Apparatus for determin
72 NMDC/MACO/16C/00/01/BE/0063 MACO-NMDC-CRCL-16C-BE-085-063 Technical Datasheet / C
 73 NMDC/MACO/16C/00/01/BE/0064 MACO-NMDC-CRCL-16C-BE-086-064 Technical Datasheet / C
74 NMDC/MACO/16C/00/01/BE/0065 MACO-NMDC-CRCL-16C-BE-087-065 Technical Datasheet / C
(Ferrograph)
75 NMDC/MACO/16C/00/01/BE/0066 MACO-NMDC-CRCL-16C-BE-088-066 Technical Datasheet / C
76 NMDC/MACO/16C/00/01/BE/0067 MACO-NMDC-CRCL-16C-BE-089-067 Technical Datasheet / C
77 NMDC/MACO/16C/00/01/BE/0068 MACO-NMDC-CRCL-16C-BE-090-068 Technical Datasheet / C
78 NMDC/MACO/16C/00/01/BE/0069 MACO-NMDC-CRCL-16C-BE-091-069 Technical Datasheet / C
79 NMDC/MACO/16C/00/01/BE/0070 MACO-NMDC-CRCL-16C-BE-092-070 Technical Datasheet / C
80 NMDC/MACO/16C/00/01/BE/0071 MACO-NMDC-CRCL-16C-BE-093-071 Technical Datasheet / C
81 NMDC/MACO/16C/00/01/BE/0072 MACO-NMDC-CRCL-16C-BE-094-072 Technical Datasheet / C
82 NMDC/MACO/16C/00/01/BE/0073 MACO-NMDC-CRCL-16C-BE-095-073 Technical Datasheet / C
83 NMDC/MACO/16C/00/01/BE/0074A MACO-NMDC-CRCL-16C-BE-096-074A Technical Datasheet / C
84 NMDC/MACO/16C/00/01/DE/0074B MACO-NMDC-CRCL-16C-DE-096-074B GA of Muffle furnace (W
85 NMDC/MACO/16C/00/01/BE/0075 MACO-NMDC-CRCL-16C-BE-097-075 Technical Datasheet / C
86 NMDC/MACO/16C/00/01/BE/0076 MACO-NMDC-CRCL-16C-BE-098-076 Technical Datasheet / C
87 NMDC/MACO/16C/00/01/BE/0077 MACO-NMDC-CRCL-16C-BE-099-077 Technical Datasheet / C
88 NMDC/MACO/16C/00/01/BE/0078 MACO-NMDC-CRCL-16C-BE-100-078 Technical Datasheet / C
89 NMDC/MACO/16C/00/01/BE/0079 MACO-NMDC-CRCL-16C-BE-101-079 Technical Datasheet / C
90 NMDC/MACO/16C/00/01/BE/0080 MACO-NMDC-CRCL-16C-BE-102-080 Technical Datasheet / C
91 NMDC/MACO/16C/00/01/BE/0081 MACO-NMDC-CRCL-16C-BE-103-081 Technical Datasheet / C
92 NMDC/MACO/16C/00/01/BE/0082 MACO-NMDC-CRCL-16C-BE-104-082 Technical Datasheet / C
capacity
93 NMDC/MACO/16C/00/01/BE/0083 MACO-NMDC-CRCL-16C-BE-105-083 Technical Datasheet / C
94 NMDC/MACO/16C/00/01/BE/0084 MACO-NMDC-CRCL-16C-BE-106-084 Technical Datasheet / C
95 NMDC/MACO/16C/00/01/BE/0085 MACO-NMDC-CRCL-16C-BE-I.-085 Technical Datasheet / C
96 NMDC/MACO/16C/00/01/BE/0086 MACO-NMDC-CRCL-16C-BE-107-086 Technical Datasheet / C
97 NMDC/MACO/16C/00/01/BE/0087 MACO-NMDC-CRCL-16C-BE-108-087 Technical Datasheet / C
98 NMDC/MACO/16C/00/01/BE/0088 MACO-NMDC-CRCL-16C-BE-109-088 Technical Datasheet / C
99 NMDC/MACO/16C/00/01/BE/0089 MACO-NMDC-CRCL-16C-BE-110-089 Technical Datasheet / C
100 NMDC/MACO/16C/00/01/BE/0090 MACO-NMDC-CRCL-16C-BE-111-090 Technical Datasheet / C
101 NMDC/MACO/16C/00/01/BE/0091 MACO-NMDC-CRCL-16C-BE-K.2-091 Technical Datasheet / C

NMDC LIMITED
CENTRAL RESEARCH & CONTROL LABORATORY EQUIPM

LIST OF DRAWINGS & NUMBERING SY

NMDC/MACO/16C/00/01/BE/0001 Rev-00

Sr. No. NMDC Dwg No. Contractor Dwg No.

102 NMDC/MACO/16C/00/01/BE/0092 MACO-NMDC-CRCL-16C-BE-K.3-092 Technical Datasheet / C
103 NMDC/MACO/16C/00/01/BE/0093 MACO-NMDC-CRCL-16C-BE-K.4-093 Technical Datasheet / C
104 NMDC/MACO/16C/00/01/BE/0094 MACO-NMDC-CRCL-16C-BE-K.5-094 Technical Datasheet / C
105 NMDC/MACO/16C/00/01/BE/0095 MACO-NMDC-CRCL-16C-BE-K.6-095 Technical Datasheet / C
specimens
106 NMDC/MACO/16C/00/01/BE/0096 MACO-NMDC-CRCL-16C-BE-K.7-096 Technical Datasheet / C
mechanical/electric &
107 NMDC/MACO/16C/00/01/BE/0097 MACO-NMDC-CRCL-16C-BE-K.8-097 Technical Datasheet / C
 108 NMDC/MACO/16C/00/01/BE/0098 MACO-NMDC-CRCL-16C-BE-K.9-098 Technical Datasheet / C
steelmarking (letters
109 NMDC/MACO/16C/00/01/BE/0099 MACO-NMDC-CRCL-16C-BE-K.10-099 Technical Datasheet / C
steelmarking (numbe
110 NMDC/MACO/16C/00/01/BE/0100 MACO-NMDC-CRCL-16C-BE-K.11-100 Technical Datasheet / C
111 NMDC/MACO/16C/00/01/BE/0101 MACO-NMDC-CRCL-16C-BE-K.12-101 Technical Datasheet / C
112 NMDC/MACO/16C/00/01/BE/0102 MACO-NMDC-CRCL-16C-BE-K.13-102 Technical Datasheet / C
113 NMDC/MACO/16C/00/01/BE/0103 MACO-NMDC-CRCL-16C-BE-K.14-103 Technical Datasheet / C
114 NMDC/MACO/16C/00/01/BE/0104 MACO-NMDC-CRCL-16C-BE-K.15-104 Technical Datasheet / C
metallographic exam
115 NMDC/MACO/16C/00/01/BE/0105 MACO-NMDC-CRCL-16C-BE-L.-105 Technical Datasheet / C
116 NMDC/MACO/16C/00/01/BE/0106 MACO-NMDC-CRCL-16C-BE-M.-106 Technical Datasheet / C
117 NMDC/MACO/16C/00/01/BE/0107 MACO-NMDC-CRCL-16C-BE-N.-107 Technical Datasheet / C

118 NMDC/MACO/16C/00/01/BE/0108 MACO-NMDC-CRCL-16C-BE-O.-108 Technical Datasheet / C

non- technological)
119 NMDC/MACO/16C/00/01/BE/0109 MACO-NMDC-CRCL-16C-BE-P.i-109 Technical Datasheet / C
120 NMDC/MACO/16C/00/01/BE/0110 MACO-NMDC-CRCL-16C-BE-P.ii-110 Technical Datasheet / C

121 NMDC/MACO/16C/00/01/BE/0111 MACO-NMDC-CRCL-16C-BE-P.iii-111 Technical Datasheet / C

122 NMDC/MACO/16C/00/01/BE/0112 MACO-NMDC-CRCL-16C-BE-P.iv-112 Technical Datasheet / C
design load cell
123 NMDC/MACO/16C/00/01/BE/0113 MACO-NMDC-CRCL-16C-BE-P.v-113 Technical Datasheet / C
124 NMDC/MACO/16C/00/01/BE/0114 MACO-NMDC-CRCL-16C-BE-P.vi-114 Technical Datasheet / C
125 NMDC/MACO/16C/00/01/BE/0115 MACO-NMDC-CRCL-16C-BE-P.vii-115 Technical Datasheet / C

NMDC LIMITED
CENTRAL RESEARCH & CONTROL LABORATORY EQUIPM

LIST OF DRAWINGS & NUMBERING SY

NMDC/MACO/16C/00/01/BE/0001 Rev-00

Sr. No. NMDC Dwg No. Contractor Dwg No.

Technical Datasheet / C
126 NMDC/MACO/16C/00/01/BE/0116 MACO-NMDC-CRCL-16C-BE-112-116 PM2.5/10 Fine Particula
attachment.
127 NMDC/MACO/16C/00/01/BE/0117 MACO-NMDC-CRCL-16C-BE-113-117 Technical Datasheet / C
128 NMDC/MACO/16C/00/01/BE/0118 MACO-NMDC-CRCL-16C-BE-114-118 Technical Datasheet / C
monitoring
129 NMDC/MACO/16C/00/01/BE/0119 MACO-NMDC-CRCL-16C-BE-117-119 Technical Datasheet / C
130 NMDC/MACO/16C/00/01/BE/0120 MACO-NMDC-CRCL-16C-BE-118-120 Technical Datasheet / C
131 NMDC/MACO/16C/00/01/BE/0121 MACO-NMDC-CRCL-16C-BE-119-121 Technical Datasheet / C
132 NMDC/MACO/16C/00/01/BE/0122A MACO-NMDC-CRCL-16C-BE-120-122A Technical Datasheet / C
133 NMDC/MACO/16C/00/01/DE/0122B MACO-NMDC-CRCL-16C-DE-120-122B GA of Muffle furnace (f
134 NMDC/MACO/16C/00/01/BE/0123 MACO-NMDC-CRCL-16C-BE-121-123 Technical Datasheet / C
135 NMDC/MACO/16C/00/01/BE/0124 MACO-NMDC-CRCL-16C-BE-122-124 Technical Datasheet / C
136 NMDC/MACO/16C/00/01/BE/0125 MACO-NMDC-CRCL-16C-BE-123-125 Technical Datasheet / C
 137 NMDC/MACO/16C/00/01/BE/0126 MACO-NMDC-CRCL-16C-BE-124-126 Technical Datasheet / C
138 NMDC/MACO/16C/00/01/BE/0127 MACO-NMDC-CRCL-16C-BE-125-127 Technical Datasheet / C
139 NMDC/MACO/16C/00/01/BE/0128 MACO-NMDC-CRCL-16C-BE-126-128 Technical Datasheet / C
140 NMDC/MACO/16C/00/01/BE/0129 MACO-NMDC-CRCL-16C-BE-127-129 Technical Datasheet / C
141 NMDC/MACO/16C/00/01/BE/0130 MACO-NMDC-CRCL-16C-BE-128-130 Technical Datasheet / C
– gta / vga
142 NMDC/MACO/16C/00/01/BE/0131 MACO-NMDC-CRCL-16C-BE-129-131 Technical Datasheet / C
143 NMDC/MACO/16C/00/01/BE/0132 MACO-NMDC-CRCL-16C-BE-130-132 Technical Datasheet / C
144 NMDC/MACO/16C/00/01/BE/0133 MACO-NMDC-CRCL-16C-BE-131-133 Technical Datasheet / C
145 NMDC/MACO/16C/00/01/BE/0134 MACO-NMDC-CRCL-16C-BE-132-134 Technical Datasheet / C
146 NMDC/MACO/16C/00/01/BE/0135 MACO-NMDC-CRCL-16C-BE-133-135 Technical Datasheet / C
147 NMDC/MACO/16C/00/01/BE/0136 MACO-NMDC-CRCL-16C-BE-134-136 Technical Datasheet / C
148 NMDC/MACO/16C/00/01/BE/0137 MACO-NMDC-CRCL-16C-BE-135-137 Technical Datasheet / C
149 NMDC/MACO/16C/00/01/BE/0138 MACO-NMDC-CRCL-16C-BE-136-138 Technical Datasheet / C
150 NMDC/MACO/16C/00/01/BE/0139 MACO-NMDC-CRCL-16C-BE-137-139 Technical Datasheet / C
151 NMDC/MACO/16C/00/01/BE/0140 MACO-NMDC-CRCL-16C-BE-138-140 Technical Datasheet / C
152 NMDC/MACO/16C/00/01/BE/0141 MACO-NMDC-CRCL-16C-BE-139-141 Technical Datasheet / C
total hardness, chloride
153 NMDC/MACO/16C/00/01/BE/0142 MACO-NMDC-CRCL-16C-BE-140-142 Technical Datasheet / C
154 NMDC/MACO/16C/00/01/BE/0143 MACO-NMDC-CRCL-16C-BE-141-143 Technical Datasheet / C

NMDC LIMITED
CENTRAL RESEARCH & CONTROL LABORATORY EQUIPM

LIST OF DRAWINGS & NUMBERING SY

NMDC/MACO/16C/00/01/BE/0001 Rev-00

Sr. No. NMDC Dwg No. Contractor Dwg No.

155 NMDC/MACO/16C/00/01/BE/0144 MACO-NMDC-CRCL-16C-BE-142-144 Technical Datasheet / C
156 NMDC/MACO/16C/00/01/BE/0145 MACO-NMDC-CRCL-16C-BE-143-145 Technical Datasheet / C

157 NMDC/MACO/16C/00/01/BE/0146 MACO-NMDC-CRCL-16C-BE-144-146 Technical Datasheet / C

158 NMDC/MACO/16C/00/35/AS/0147 MACO-NMDC-CRCL-16C-AS-000-147 Civil foundation assignm
159 NMDC/MACO/16C/00/20/AS/0148 MACO-NMDC-CRCL-16C-AS-000-148 Heat load calculation fo
160 NMDC/MACO/16C/00/25/AS/0149 MACO-NMDC-CRCL-16C-AS-000-149 Electrical load list for al
161 NMDC/MACO/16C/00/15-16/AS/0150 MACO-NMDC-CRCL-16C-AS-000-150 Utility requirements (wa
SPECTRIS DRGS
162 NMDC/SPEC/16C/00/01/BE/0151 SPEC-NMDC-CRCL-16C-BE-001-151 Technical Datasheet / C
ray fluorescence Spect

163 NMDC/SPEC/16C/00/01/BE/0152 SPEC-NMDC-CRCL-16C-BE-002-152 Technical Datasheet / C

164 NMDC/SPEC/16C/00/01/BE/0153 SPEC-NMDC-CRCL-16C-BE-009-153 Technical Datasheet / C
AIMIL DRGS
165 NMDC/AIMIL/16C/00/01/BE/0154 AIMIL-NMDC-CRCL-16C-BE-014-154 Technical Datasheet / C
166 NMDC/AIMIL/16C/00/01/BE/0155 AIMIL-NMDC-CRCL-16C-BE-018-155 Technical Datasheet / C
sample cut-off machine

167 NMDC/AIMIL/16C/00/01/BE/0156 AIMIL-NMDC-CRCL-16C-BE-019-156 Technical Datasheet / C

grinding-cum- polishing
 168 NMDC/AIMIL/16C/00/01/BE/0157 AIMIL-NMDC-CRCL-16C-BE-020-157 Technical Datasheet / C
mounting press

Technical Datasheet / C
system for minerals/coa
169 NMDC/AIMIL/16C/00/01/BE/0158 AIMIL-NMDC-CRCL-16C-BE-021-158

170 NMDC/AIMIL/16C/00/01/BE/0159A AIMIL-NMDC-CRCL-16C-BE-022-159A Technical Datasheet / C

machine, 100 t

171 NMDC/AIMIL/16C/00/01/DE/0159B AIMIL-NMDC-CRCL-16C-DE-022-159B GA of Computer contro

172 NMDC/AIMIL/16C/00/01/BE/0160A AIMIL-NMDC-CRCL-16C-BE-023-160A Technical Datasheet / C
machine, 40 t

173 NMDC/AIMIL/16C/00/01/DE/0160B AIMIL-NMDC-CRCL-16C-DE-023-160B GA of Computer contro

174 NMDC/AIMIL/16C/00/01/BE/0161A AIMIL-NMDC-CRCL-16C-BE-024-161A Technical Datasheet / C
facility for sub-zero test

175 NMDC/AIMIL/16C/00/01/DE/0161B AIMIL-NMDC-CRCL-16C-DE-024-161B GA of Instrumented imp

NMDC LIMITED
CENTRAL RESEARCH & CONTROL LABORATORY EQUIPM

LIST OF DRAWINGS & NUMBERING SY

NMDC/MACO/16C/00/01/BE/0001 Rev-00

Sr. No. NMDC Dwg No. Contractor Dwg No.

176 NMDC/AIMIL/16C/00/01/BE/0162 AIMIL-NMDC-CRCL-16C-BE-025-162 Technical Datasheet / C

177 NMDC/AIMIL/16C/00/01/BE/0163 AIMIL-NMDC-CRCL-16C-BE-026-163 Technical Datasheet / C

tester

178 NMDC/AIMIL/16C/00/01/BE/0164 AIMIL-NMDC-CRCL-16C-BE-027-164 Technical Datasheet / C

179 NMDC/AIMIL/16C/00/01/BE/0165A AIMIL-NMDC-CRCL-16C-BE-028-165A Technical Datasheet / C
machine, 50 t

180 NMDC/AIMIL/16C/00/01/DE/0165B AIMIL-NMDC-CRCL-16C-DE-028-165B GA of Computer contro

181 NMDC/AIMIL/16C/00/01/BE/0166A AIMIL-NMDC-CRCL-16C-BE-029-166A Technical Datasheet / C
machine, 100 t

182 NMDC/AIMIL/16C/00/01/DE/0166B AIMIL-NMDC-CRCL-16C-DE-029-166B GA of Computer contro

183 NMDC/AIMIL/16C/00/01/BE/0167 AIMIL-NMDC-CRCL-16C-BE-036-167 Technical Datasheet / C
184 NMDC/AIMIL/16C/00/01/BE/0168 AIMIL-NMDC-CRCL-16C-BE-K.1-168 Technical Datasheet / C
185 NMDC/AIMIL/16C/00/01/BE/0169 AIMIL-NMDC-CRCL-16C-BE-115-169 Technical Datasheet / C

186 NMDC/AIMIL/16C/00/01/BE/0170 AIMIL-NMDC-CRCL-16C-BE-116-170 Technical Datasheet / C

INSMART DRGS
187 NMDC/INSMART/16C/00/01/BE/0171A INSMART-NMDC-CRCL-16C-BE-006-171A Technical Datasheet / C
188 NMDC/INSMART/16C/00/01/DE/0171B INSMART-NMDC-CRCL-16C-DE-006-171B GA of Swing grinding m
189 NMDC/INSMART/16C/00/01/BE/0172A INSMART-NMDC-CRCL-16C-BE-007-172A Technical Datasheet / C
190 NMDC/INSMART/16C/00/01/DE/0172B INSMART-NMDC-CRCL-16C-DE-007-172B GA of Briquetting press
191 NMDC/INSMART/16C/00/01/BE/0173A INSMART-NMDC-CRCL-16C-BE-010-173A Technical Datasheet / C
192 NMDC/INSMART/16C/00/01/DE/0173B INSMART-NMDC-CRCL-16C-DE-010-173B GA of Pin Cutting Mach
 193 NMDC/INSMART/16C/00/01/BE/0174A INSMART-NMDC-CRCL-16C-BE-063-174A Technical Datasheet / C
194 NMDC/INSMART/16C/00/01/DE/0174B INSMART-NMDC-CRCL-16C-DE-063-174B GA of of Mixer machine
195 NMDC/INSMART/16C/00/01/BE/0175A INSMART-NMDC-CRCL-16C-BE-070-175A Technical Datasheet / C
196 NMDC/INSMART/16C/00/01/DE/0175B INSMART-NMDC-CRCL-16C-DE-070-175B GA of Jaw crusher
197 NMDC/INSMART/16C/00/01/BE/0176A INSMART-NMDC-CRCL-16C-BE-071-176A Technical Datasheet / C
198 NMDC/INSMART/16C/00/01/DE/0176B INSMART-NMDC-CRCL-16C-DE-071-176B GA of Roll crusher
199 NMDC/INSMART/16C/00/01/BE/0177A INSMART-NMDC-CRCL-16C-BE-073-177A Technical Datasheet / C
200 NMDC/INSMART/16C/00/01/DE/0177B INSMART-NMDC-CRCL-16C-DE-073-177B GA of of Riffle sample
201 NMDC/INSMART/16C/00/01/BE/0178A INSMART-NMDC-CRCL-16C-BE-074-178A Technical Datasheet / C

202 NMDC/INSMART/16C/00/01/DE/0178B INSMART-NMDC-CRCL-16C-DE-074-178B GA of of Ro-tap Sieve Sh

NMDC LIMITED
CENTRAL RESEARCH & CONTROL LABORATORY EQUIPM

LIST OF DRAWINGS & NUMBERING SY

NMDC/MACO/16C/00/01/BE/0001 Rev-00

Sr. No. NMDC Dwg No. Contractor Dwg No.

Basic Engg Approval (BE - A) 174
Basic Engg Reference (BE - R) 0
Detail Engg Approval (DE - A) 0
Detail Engg Reference (DE - R) 24
Civil Assignment (AS-R) 4
TOTAL 202

Note: In case drawings are to be added for completion of detail engineering in addition to the drawings listed above then further drawin
be completed with fewer drawings without prejudice to completeness of scope, than extra drawing would be deleted.

DRAWING TITLE SHEET

 With six (6) copies of
enclosures

Only Intimation

With four (4) copies

of enclosures

s (Package No.16C) for

CRCL-Eqpt/568/125/2370

g Title /Cover Sheet

Dear Sir,
-02-19, 2019 for inclusion of dwgs serial.
ave been duly incorporated and we are
oncerned Offices for your kind approval.
Laboratory equipments of CTS Dwg. No.
NMDC/MACO/16C/00/01/BE/0001 Rev-01
2. Title Sheet / Cover Page
te for all the equipment”’ at this stage as
y be covered in dwgs categories ‘a to g’.
ed in due course of time. Request please
all other dwgs in a progressive manner.
Thanking you, Sincerely,
For Maco Corporation India Pvt. Ltd
B.D. Ghosh, Director | Projects
Encl: a/a
ee, Area Manager, AIMIL Limited. Kolkata
. R. Srinivasan, Spectris Pte Ltd, Mumbai
al manager, Insmart Susyem, Hyderabad
Page 1 of 1
 NMDC LIMITED
ABORATORY EQUIPMENT/FACILITIES PACKAGE NO. - 16C

INGS & NUMBERING SYSTEM

6C/00/01/BE/0001 Rev-00

Drawing Description Category Type

List of Drawings & Numbering system BE A

Implementation Schedule (Level-II) BE A
Layout of equipments in CRCL building BE A
Technical Datasheet / Catalogue of Direct reading spark type optical emission BE A
spectrometer
Technical Datasheet / Catalogue of Oil analysis spectrometer BE A
Technical Datasheet / Catalogue of Spectrographic Sample cut-off machine BE A
(vertical and oscillating type)
Technical Datasheet / Catalogue of Melting and casting equipment BE A
GA of Melting and casting equipment DE R
Technical Datasheet / Catalogue of Sample drilling machine BE A
Technical Datasheet / Catalogue of Oxygen–nitrogen–hydrogen anlyser BE A
Technical Datasheet / Catalogue of Automated ultimate analyser BE A
Technical Datasheet / Catalogue of Scanning electron microscope along with BE A
EDS & EBSD
Technical Datasheet / Catalogue of Metallurgical microscope with image BE A
analyser including micro- hardness indentor
Technical Specification / Catalogue of Coal petrological microscope BE A
Technical Datasheet / Catalogue of Universal sheet metal testing machine BE A

GA of Universal sheet metal testing machine DE R

Technical Datasheet / Catalogue of Furnace for strain ageing test at 250°C BE A

GA of Furnace for strain ageing test at 250°C DE R

Technical Datasheet / Catalogue of Furnace for strain ageing test at 350°C BE A

GA of Furnace for strain ageing test at 350°C DE R

Technical Datasheet / Catalogue of Furnace for heat treatment BE A
 GA of Furnace for heat treatment DE R
Technical Datasheet / Catalogue of Salt spray chamber and humidity chamber BE A
(for corrosion testing of Hot rolled coil )
GA of Salt spray chamber and humidity chamber (for corrosion testing of Hot DE R
rolled coil )

NMDC LIMITED
ABORATORY EQUIPMENT/FACILITIES PACKAGE NO. - 16C

INGS & NUMBERING SYSTEM

6C/00/01/BE/0001 Rev-00

Drawing Description Category Type

Technical Datasheet / Catalogue of Quenching tank BE A
GA of Quenching tank DE R
Technical Datasheet / Catalogue of Horizontal power hacksaw BE A
Technical Datasheet / Catalogue of Automatic double column band saw machine BE A
for steel sample cutting
Technical Datasheet / Catalogue of Circular saw for steel sample cutting BE A
Technical Datasheet / Catalogue of CNC unniversal type saw sharpening BE A
machine
Technical Datasheet / Catalogue of Pedestal grinder BE A
Technical Datasheet / Catalogue of Non-CNC lathe BE A
Technical Datasheet / Catalogue of CNC lathe BE A
Technical Datasheet / Catalogue of CNC vertical milling machine BE A
Technical Datasheet / Catalogue of CNC universal milling machine BE A
Technical Datasheet / Catalogue of CNC horizontal machining centre BE A
Technical Datasheet / Catalogue of CNC Laser sample cutting machine (Profile BE A
cutter)
Technical Datasheet / Catalogue of Surface grinder BE A
Technical Datasheet / Catalogue of Shaping machine BE A
Technical Datasheet / Catalogue of Column drilling machine BE A
Technical Datasheet / Catalogue of Spalling resistance test facilities for BE A
refractory materials
Technical Datasheet / Catalogue of Pyrometric cone equivalent furnace for BE A
refractory bricks
Technical Datasheet / Catalogue of RUL furnace for refractory bricks BE A
GA of RUL furnace for refractory bricks DE R
Technical Datasheet / Catalogue of Thermal conductivity tester for refractory BE A
bricks
Technical Datasheet / Catalogue of Apparatus for determination of hot modulus BE A
rupture of refractory bricks
Technical Datasheet / Catalogue of Apparatus for determination of apparent BE A
porosity of refractory bricks
Technical Datasheet / Catalogue of Compression testing machine for BE A
determination of cold crushing strength of refractory bricks
 NMDC LIMITED
ABORATORY EQUIPMENT/FACILITIES PACKAGE NO. - 16C

INGS & NUMBERING SYSTEM

6C/00/01/BE/0001 Rev-00

Drawing Description Category Type

Technical Datasheet / Catalogue of High temperature furnace (Temperature BE A
range 1700°C to 1800°C)
GA of High temperature furnace (Temperature range 1700°C to 1800°C) DE R
Technical Datasheet / Catalogue of Radiation pyrometer (Laser type) BE A
Technical Datasheet / Catalogue of Platform scale BE A
Technical Datasheet / Catalogue of Electronic platform type weighing scale BE A

Technical Datasheet / Catalogue of Refractory brick cutting machine BE A

Technical Datasheet / Catalogue of Grinding machine BE A
Technical Datasheet / Catalogue of Drilling machine for refractories BE A
Technical Datasheet / Catalogue of Apparatus of determination of bulk density of BE A
iron ore
Technical Datasheet / Catalogue of Facility for determination of thermal BE A
degradation index (TDI)
Technical Datasheet / Catalogue of Apparatus for determination of softening BE A
melting characteristics of iron ore sinters/ pellets/ lumps
Technical Datasheet / Catalogue of Apparatus for determination of Reducibility
Index (RI) and Reduction Degradation Index (RDI) of iron ore sinters/ BE A
pellets/lumps

Technical Datasheet / Catalogue of Raymond mill BE A

Technical Datasheet / Catalogue of Drilling machine BE A
Technical Datasheet / Catalogue of Pensky martens flash point apparatus for BE A
petroleum products
Technical Datasheet / Catalogue of Redwood viscometer BE A
Technical Datasheet / Catalogue of Cloud point and pour point apparatus for BE A
petroleum products
Technical Datasheet / Catalogue of Dean and stark apparatus BE A
Technical Datasheet / Catalogue of Apparatus for moisture measurement BE A

Technical Datasheet / Catalogue of Portable automatic particle counter BE A

Technical Datasheet / Catalogue of Apparatus for determination of consistency BE A
of lubricating grease
Technical Datasheet / Catalogue of Apparatus for determination of thermal BE A
stability of lubricating oil

NMDC LIMITED
ABORATORY EQUIPMENT/FACILITIES PACKAGE NO. - 16C

INGS & NUMBERING SYSTEM

6C/00/01/BE/0001 Rev-00

Drawing Description Category Type

Apparatus for determination of apparent viscosity of lubricating grease BE A
Technical Datasheet / Catalogue of Oil emulsion tester (water-in-oil) BE A
 Technical Datasheet / Catalogue of Oil emulsion tester (oil-in-water) BE A
Technical Datasheet / Catalogue of Apparatus for wear-iron metal analysis BE A
(Ferrograph)
Technical Datasheet / Catalogue of Fume hood BE A
Technical Datasheet / Catalogue of Double analytical table BE A
Technical Datasheet / Catalogue of Electric top loading balance BE A
Technical Datasheet / Catalogue of Precision analytical balance BE A
Technical Datasheet / Catalogue of Water bath BE A
Technical Datasheet / Catalogue of Refrigerator BE A
Technical Datasheet / Catalogue of Ultra pure water purification system BE A
Technical Datasheet / Catalogue of Drying oven BE A
Technical Datasheet / Catalogue of Muffle furnace BE A
GA of Muffle furnace (Wet chemical analysis equipment) DE R
Technical Datasheet / Catalogue of Hot plate BE A
Technical Datasheet / Catalogue of Hot plate-cum-magnetic stirrer BE A
Technical Datasheet / Catalogue of Digital pH meter BE A
Technical Datasheet / Catalogue of Digital conductivity meter BE A
Technical Datasheet / Catalogue of Dissolved oxygen meter BE A
Technical Datasheet / Catalogue of Fume hood BE A
Technical Datasheet / Catalogue of Double analytical table BE A
Technical Datasheet / Catalogue of Battery operated power trolleys, 2000 kg BE A
capacity
Technical Datasheet / Catalogue of Hand trolleys BE A
Technical Datasheet / Catalogue of Scrap buckets / chip bins BE A
Technical Datasheet / Catalogue of Laboratory glassware & reagents BE A
Technical Datasheet / Catalogue of Personal computer BE A
Technical Datasheet / Catalogue of DN type laser Jet Printers BE A
Technical Datasheet / Catalogue of Flatbed scanners BE A
Technical Datasheet / Catalogue of UPS for computers BE A
Technical Datasheet / Catalogue of Multi-purpose XEROX machine BE A
Technical Datasheet / Catalogue of Portable stroboscope for surface tester BE A

NMDC LIMITED
ABORATORY EQUIPMENT/FACILITIES PACKAGE NO. - 16C

INGS & NUMBERING SYSTEM

6C/00/01/BE/0001 Rev-00

Drawing Description Category Type

Technical Datasheet / Catalogue of Portable stress analyser BE A
Technical Datasheet / Catalogue of Mobile spectrometer BE A
Technical Datasheet / Catalogue of Dust vacuum cleaner BE A
Technical Datasheet / Catalogue of Marking machine for tensile stress test BE A
specimens
Technical Datasheet / Catalogue of Set of tools including BE A
mechanical/electric & Electric/electronics
Technical Datasheet / Catalogue of Electric engraver BE A
 Technical Datasheet / Catalogue of Box of marking punches for BE A
steelmarking (letters) – 27 “Capital Letters”
Technical Datasheet / Catalogue of Box of marking punches for BE A
steelmarking (numbers) – 6 mm height
Technical Datasheet / Catalogue of Flexible tape rule- 2.5 mtrs. BE A
Technical Datasheet / Catalogue of Files for steel – 12ʺ length BE A
Technical Datasheet / Catalogue of Protective hand gloves BE A
Technical Datasheet / Catalogue of Protective eye glass BE A
Technical Datasheet / Catalogue of Glassware and reagents for BE A
metallographic examination
Technical Datasheet / Catalogue of Set of hand tools BE A
Technical Datasheet / Catalogue of Set of measuring tools BE A
Technical Datasheet / Catalogue of Public Address System (Audio-Visual) BE A

Technical Datasheet / Catalogue of Laboratory furniture (Technological & BE A

non- technological)
Technical Datasheet / Catalogue of Motorised Broach cutting machine BE A
Technical Datasheet / Catalogue of Liquid Nitrogen containers,100 Ltr each BE A

Technical Datasheet / Catalogue of Notch Profile shadow Projector BE A

Technical Datasheet / Catalogue of Dynamometers (Strain Gauge type pancack BE A
design load cell
Technical Datasheet / Catalogue of Magnetic Sweepers BE A
Technical Datasheet / Catalogue of Gas cutting Machine BE A
Technical Datasheet / Catalogue of Welding machines transformer type BE A

NMDC LIMITED
ABORATORY EQUIPMENT/FACILITIES PACKAGE NO. - 16C

INGS & NUMBERING SYSTEM

6C/00/01/BE/0001 Rev-00

Drawing Description Category Type

Technical Datasheet / Catalogue of Electrically operated microprocessor based
PM2.5/10 Fine Particulate Dust sampler along with gaseous sampling BE A
attachment.
Technical Datasheet / Catalogue of Stack monitoring kit BE A
Technical Datasheet / Catalogue of Portable flue gas analyzer for stack BE A
monitoring
Technical Datasheet / Catalogue of Ion analyser BE A
Technical Datasheet / Catalogue of Hot air oven BE A
Technical Datasheet / Catalogue of Hot plate BE A
Technical Datasheet / Catalogue of Muffle furnace BE A
GA of Muffle furnace (for environmental testing facilities) DE R
Technical Datasheet / Catalogue of BOD incubator BE A
Technical Datasheet / Catalogue of BOD analyser BE A
Technical Datasheet / Catalogue of DO meter BE A
 Technical Datasheet / Catalogue of Spectrophotometer BE A
Technical Datasheet / Catalogue of COD digestion assembly BE A
Technical Datasheet / Catalogue of pH meter BE A
Technical Datasheet / Catalogue of Conductivity meter BE A
Technical Datasheet / Catalogue of Atomic absorption spectrophotometer (aas) BE A
– gta / vga
Technical Datasheet / Catalogue of Weighing balance (micro balance) BE A
Technical Datasheet / Catalogue of Top loading balance BE A
Technical Datasheet / Catalogue of Filtration assembly BE A
Technical Datasheet / Catalogue of Vacuum pump for filtration assembly BE A
Technical Datasheet / Catalogue of Heating mantle BE A
Technical Datasheet / Catalogue of Refrigerator BE A
Technical Datasheet / Catalogue of Water bath BE A
Technical Datasheet / Catalogue of Fume chamber BE A
Technical Datasheet / Catalogue of Turbidity meter BE A
Technical Datasheet / Catalogue of Portable oxygen meter BE A
Technical Datasheet / Catalogue of Portable photometer with reagents for cod, BE A
total hardness, chloridee, chlorine
Technical Datasheet / Catalogue of Auto titrator BE A
Technical Datasheet / Catalogue of Dessicators BE A

NMDC LIMITED
ABORATORY EQUIPMENT/FACILITIES PACKAGE NO. - 16C

INGS & NUMBERING SYSTEM

6C/00/01/BE/0001 Rev-00

Drawing Description Category Type

Technical Datasheet / Catalogue of Flame photometer BE A
Technical Datasheet / Catalogue of Glass ware & plastic ware for titration BE A

Technical Datasheet / Catalogue of Orsat apparatus BE A

Civil foundation assignment of Equipments AS R
Heat load calculation for individual rooms housing eqpts AS R
Electrical load list for all Equipments AS R
Utility requirements (water / compressed air) for Equipments as applicable AS R

Technical Datasheet / Catalogue of Wave length dispersive type sequential X-

ray fluorescence Spectrometer BE A

Technical Datasheet / Catalogue of X-ray diffractometer BE A

Technical Datasheet / Catalogue of Fusion bead making machine BE A

Technical Datasheet / Catalogue of Hydraulic press BE A

Technical Datasheet / Catalogue of Manual-cum-automatic metallographic
sample cut-off machine BE A

Technical Datasheet / Catalogue of Microprocessor controlled semi-automatic

grinding-cum- polishing machine BE A
 Technical Datasheet / Catalogue of Automatic metallographic specimen
mounting press BE A

Technical Datasheet / Catalogue of Bulk specimen and thin section preparation

system for minerals/coal for reflected/transmitted light microscopy

BE A
Technical Datasheet / Catalogue of Computer controlled universal testing
machine, 100 t BE A

GA of Computer controlled universal testing machine, 100 t DE R

Technical Datasheet / Catalogue of Computer controlled universal testing
machine, 40 t BE A

GA of Computer controlled universal testing machine, 40 t DE R

Technical Datasheet / Catalogue of Instrumented impact testing machine with
facility for sub-zero testing BE A

GA of Instrumented impact testing machine with facility for sub-zero testing

DE R

NMDC LIMITED
ABORATORY EQUIPMENT/FACILITIES PACKAGE NO. - 16C

INGS & NUMBERING SYSTEM

6C/00/01/BE/0001 Rev-00

Drawing Description Category Type

Technical Datasheet / Catalogue of Computerised brinell hardness tester
BE A

Technical Datasheet / Catalogue of Rockwell-cum-rockwell superficial hardness

tester BE A

Technical Datasheet / Catalogue of Vickers hardness tester BE A

Technical Datasheet / Catalogue of Computer controlled bending and folding
machine, 50 t BE A

GA of Computer controlled bending and folding machine, 50 t DE R

Technical Datasheet / Catalogue of Computer controlled bending and folding
machine, 100 t BE A

GA of Computer controlled bending and folding machine, 100 t DE R

Technical Datasheet / Catalogue of Portable surface roughness tester BE A
Technical Datasheet / Catalogue of Portable field microscope BE A
Technical Datasheet / Catalogue of Integrating averaging sound level meter
BE A

Technical Datasheet / Catalogue of Automatic weather station BE A

Technical Datasheet / Catalogue of Swing grinding mill BE A

GA of Swing grinding mill DE R
Technical Datasheet / Catalogue of Briquetting press BE A
GA of Briquetting press DE R
Technical Datasheet / Catalogue of Pin cutting machine BE A
GA of Pin Cutting Machine DE R
 Technical Datasheet / Catalogue of Mixer machine BE A
GA of of Mixer machine DE R
Technical Datasheet / Catalogue of Jaw crusher BE A
GA of Jaw crusher DE R
Technical Datasheet / Catalogue of Roll crusher BE A
GA of Roll crusher DE R
Technical Datasheet / Catalogue of Riffle sample splitter BE A
GA of of Riffle sample splitter DE R
Technical Datasheet / Catalogue of Ro-tap Sieve Shaker & Ty-lab Sieve Shaker BE A

GA of of Ro-tap Sieve Shaker & Ty-lab Sieve Shaker DE R

NMDC LIMITED
ABORATORY EQUIPMENT/FACILITIES PACKAGE NO. - 16C

INGS & NUMBERING SYSTEM

6C/00/01/BE/0001 Rev-00

Drawing Description Category Type

Nomenclatures
Baisc Engineering = BE
Detail Engineering = DE
Civil Assignment = AS
Approval = A
Reference = R

d above then further drawing would be added accordingly, vise versa in case detailed engineering can
ould be deleted.
Sr. No. NMDC Dwg No. Drawing Description

MACO DRGS

1 NMDC/MACO/16C/00/01/BE/0001 List of Drawings & Numbering system

2 NMDC/MACO/16C/00/00/BE/0002 Implementation Schedule (Level-II)
3 NMDC/MACO/16C/00/01/BE/0003 Layout of equipments in CRCL building
4 NMDC/MACO/16C/00/01/BE/0004 Technical Datasheet / Catalogue of Direct reading spark type optical emission
spectrometer
5 NMDC/MACO/16C/00/01/BE/0005 Technical Datasheet / Catalogue of Oil analysis spectrometer
6 NMDC/MACO/16C/00/01/BE/0006 Technical Datasheet / Catalogue of Spectrographic Sample cut-off machine
(vertical and oscillating type)
7 NMDC/MACO/16C/00/01/BE/0007A Technical Datasheet / Catalogue of Melting and casting equipment
8 NMDC/MACO/16C/00/01/DE/0007B GA of Melting and casting equipment
9 NMDC/MACO/16C/00/01/BE/0008 Technical Datasheet / Catalogue of Sample drilling machine
10 NMDC/MACO/16C/00/01/BE/0009 Technical Datasheet / Catalogue of Oxygen–nitrogen–hydrogen anlyser
11 NMDC/MACO/16C/00/01/BE/0010 Technical Datasheet / Catalogue of Automated ultimate analyser
12 NMDC/MACO/16C/00/01/BE/0011 Technical Datasheet / Catalogue of Scanning electron microscope along with
EDS & EBSD
13 NMDC/MACO/16C/00/01/BE/0012 Technical Datasheet / Catalogue of Metallurgical microscope with image
analyser including micro- hardness indentor
14 NMDC/MACO/16C/00/01/BE/0013 Technical Specification / Catalogue of Coal petrological microscope
15 NMDC/MACO/16C/00/01/BE/0014A Technical Datasheet / Catalogue of Universal sheet metal testing machine

16 NMDC/MACO/16C/00/01/DE/0014B GA of Universal sheet metal testing machine

17 NMDC/MACO/16C/00/01/BE/0015A Technical Datasheet / Catalogue of Furnace for strain ageing test at 250°C

18 NMDC/MACO/16C/00/01/DE/0015B GA of Furnace for strain ageing test at 250°C

19 NMDC/MACO/16C/00/01/BE/0016A Technical Datasheet / Catalogue of Furnace for strain ageing test at 350°C

20 NMDC/MACO/16C/00/01/DE/0016B GA of Furnace for strain ageing test at 350°C

21 NMDC/MACO/16C/00/01/BE/0017A Technical Datasheet / Catalogue of Furnace for heat treatment
22 NMDC/MACO/16C/00/01/DE/0017B GA of Furnace for heat treatment
23 NMDC/MACO/16C/00/01/BE/0018A Technical Datasheet / Catalogue of Salt spray chamber and humidity chamber
(for corrosion testing of Hot rolled coil )
24 NMDC/MACO/16C/00/01/DE/0018B GA of Salt spray chamber and humidity chamber (for corrosion testing of Hot
rolled coil )

Sr. No. NMDC Dwg No. Drawing Description

25 NMDC/MACO/16C/00/01/BE/0019A Technical Datasheet / Catalogue of Quenching tank
26 NMDC/MACO/16C/00/01/DE/0019B GA of Quenching tank
27 NMDC/MACO/16C/00/01/BE/0020 Technical Datasheet / Catalogue of Horizontal power hacksaw
 28 NMDC/MACO/16C/00/01/BE/0021 Technical Datasheet / Catalogue of Automatic double column band saw machine
for steel sample cutting
29 NMDC/MACO/16C/00/01/BE/0022 Technical Datasheet / Catalogue of Circular saw for steel sample cutting
30 NMDC/MACO/16C/00/01/BE/0023 Technical Datasheet / Catalogue of CNC unniversal type saw sharpening
machine
31 NMDC/MACO/16C/00/01/BE/0024 Technical Datasheet / Catalogue of Pedestal grinder
32 NMDC/MACO/16C/00/01/BE/0025 Technical Datasheet / Catalogue of Non-CNC lathe
33 NMDC/MACO/16C/00/01/BE/0026 Technical Datasheet / Catalogue of CNC lathe
34 NMDC/MACO/16C/00/01/BE/0027 Technical Datasheet / Catalogue of CNC vertical milling machine
35 NMDC/MACO/16C/00/01/BE/0028 Technical Datasheet / Catalogue of CNC universal milling machine
36 NMDC/MACO/16C/00/01/BE/0029 Technical Datasheet / Catalogue of CNC horizontal machining centre
37 NMDC/MACO/16C/00/01/BE/0030 Technical Datasheet / Catalogue of CNC Laser sample cutting machine (Profile
cutter)
38 NMDC/MACO/16C/00/01/BE/0031 Technical Datasheet / Catalogue of Surface grinder
39 NMDC/MACO/16C/00/01/BE/0032 Technical Datasheet / Catalogue of Shaping machine
40 NMDC/MACO/16C/00/01/BE/0033 Technical Datasheet / Catalogue of Column drilling machine
41 NMDC/MACO/16C/00/01/BE/0034 Technical Datasheet / Catalogue of Spalling resistance test facilities for
refractory materials
42 NMDC/MACO/16C/00/01/BE/0035 Technical Datasheet / Catalogue of Pyrometric cone equivalent furnace for
refractory bricks
43 NMDC/MACO/16C/00/01/BE/0036A Technical Datasheet / Catalogue of RUL furnace for refractory bricks
44 NMDC/MACO/16C/00/01/DE/0036B GA of RUL furnace for refractory bricks
45 NMDC/MACO/16C/00/01/BE/0037 Technical Datasheet / Catalogue of Thermal conductivity tester for refractory
bricks
46 NMDC/MACO/16C/00/01/BE/0038 Technical Datasheet / Catalogue of Apparatus for determination of hot modulus
rupture of refractory bricks
47 NMDC/MACO/16C/00/01/BE/0039 Technical Datasheet / Catalogue of Apparatus for determination of apparent
porosity of refractory bricks
48 NMDC/MACO/16C/00/01/BE/0040 Technical Datasheet / Catalogue of Compression testing machine for
determination of cold crushing strength of refractory bricks

Sr. No. NMDC Dwg No. Drawing Description

49 NMDC/MACO/16C/00/01/BE/0041A Technical Datasheet / Catalogue of High temperature furnace (Temperature
range 1700°C to 1800°C)
50 NMDC/MACO/16C/00/01/DE/0041B GA of High temperature furnace (Temperature range 1700°C to 1800°C)
51 NMDC/MACO/16C/00/01/BE/0042 Technical Datasheet / Catalogue of Radiation pyrometer (Laser type)
52 NMDC/MACO/16C/00/01/BE/0043 Technical Datasheet / Catalogue of Platform scale
53 NMDC/MACO/16C/00/01/BE/0044 Technical Datasheet / Catalogue of Electronic platform type weighing scale

54 NMDC/MACO/16C/00/01/BE/0045 Technical Datasheet / Catalogue of Refractory brick cutting machine

55 NMDC/MACO/16C/00/01/BE/0046 Technical Datasheet / Catalogue of Grinding machine
56 NMDC/MACO/16C/00/01/BE/0047 Technical Datasheet / Catalogue of Drilling machine for refractories
57 NMDC/MACO/16C/00/01/BE/0048 Technical Datasheet / Catalogue of Apparatus of determination of bulk density of
iron ore
 58 NMDC/MACO/16C/00/01/BE/0049 Technical Datasheet / Catalogue of Facility for determination of thermal
degradation index (TDI)
59 NMDC/MACO/16C/00/01/BE/0050 Technical Datasheet / Catalogue of Apparatus for determination of softening
melting characteristics of iron ore sinters/ pellets/ lumps
Technical Datasheet / Catalogue of Apparatus for determination of Reducibility
60 NMDC/MACO/16C/00/01/BE/0051 Index (RI) and Reduction Degradation Index (RDI) of iron ore sinters/
pellets/lumps

61 NMDC/MACO/16C/00/01/BE/0052 Technical Datasheet / Catalogue of Raymond mill

62 NMDC/MACO/16C/00/01/BE/0053 Technical Datasheet / Catalogue of Drilling machine
63 NMDC/MACO/16C/00/01/BE/0054 Technical Datasheet / Catalogue of Pensky martens flash point apparatus for
petroleum products
64 NMDC/MACO/16C/00/01/BE/0055 Technical Datasheet / Catalogue of Redwood viscometer
65 NMDC/MACO/16C/00/01/BE/0056 Technical Datasheet / Catalogue of Cloud point and pour point apparatus for
petroleum products
66 NMDC/MACO/16C/00/01/BE/0057 Technical Datasheet / Catalogue of Dean and stark apparatus
67 NMDC/MACO/16C/00/01/BE/0058 Technical Datasheet / Catalogue of Apparatus for moisture measurement

68 NMDC/MACO/16C/00/01/BE/0059 Technical Datasheet / Catalogue of Portable automatic particle counter

69 NMDC/MACO/16C/00/01/BE/0060 Technical Datasheet / Catalogue of Apparatus for determination of consistency
of lubricating grease
70 NMDC/MACO/16C/00/01/BE/0061 Technical Datasheet / Catalogue of Apparatus for determination of thermal
stability of lubricating oil

Sr. No. NMDC Dwg No. Drawing Description

71 NMDC/MACO/16C/00/01/BE/0062 Apparatus for determination of apparent viscosity of lubricating grease
72 NMDC/MACO/16C/00/01/BE/0063 Technical Datasheet / Catalogue of Oil emulsion tester (water-in-oil)
73 NMDC/MACO/16C/00/01/BE/0064 Technical Datasheet / Catalogue of Oil emulsion tester (oil-in-water)
74 NMDC/MACO/16C/00/01/BE/0065 Technical Datasheet / Catalogue of Apparatus for wear-iron metal analysis
(Ferrograph)
75 NMDC/MACO/16C/00/01/BE/0066 Technical Datasheet / Catalogue of Fume hood
76 NMDC/MACO/16C/00/01/BE/0067 Technical Datasheet / Catalogue of Double analytical table
77 NMDC/MACO/16C/00/01/BE/0068 Technical Datasheet / Catalogue of Electric top loading balance
78 NMDC/MACO/16C/00/01/BE/0069 Technical Datasheet / Catalogue of Precision analytical balance
79 NMDC/MACO/16C/00/01/BE/0070 Technical Datasheet / Catalogue of Water bath
80 NMDC/MACO/16C/00/01/BE/0071 Technical Datasheet / Catalogue of Refrigerator
81 NMDC/MACO/16C/00/01/BE/0072 Technical Datasheet / Catalogue of Ultra pure water purification system
82 NMDC/MACO/16C/00/01/BE/0073 Technical Datasheet / Catalogue of Drying oven
83 NMDC/MACO/16C/00/01/BE/0074A Technical Datasheet / Catalogue of Muffle furnace
84 NMDC/MACO/16C/00/01/DE/0074B GA of Muffle furnace (Wet chemical analysis equipment)
85 NMDC/MACO/16C/00/01/BE/0075 Technical Datasheet / Catalogue of Hot plate
86 NMDC/MACO/16C/00/01/BE/0076 Technical Datasheet / Catalogue of Hot plate-cum-magnetic stirrer
87 NMDC/MACO/16C/00/01/BE/0077 Technical Datasheet / Catalogue of Digital pH meter
88 NMDC/MACO/16C/00/01/BE/0078 Technical Datasheet / Catalogue of Digital conductivity meter
89 NMDC/MACO/16C/00/01/BE/0079 Technical Datasheet / Catalogue of Dissolved oxygen meter
90 NMDC/MACO/16C/00/01/BE/0080 Technical Datasheet / Catalogue of Fume hood
91 NMDC/MACO/16C/00/01/BE/0081 Technical Datasheet / Catalogue of Double analytical table
92 NMDC/MACO/16C/00/01/BE/0082 Technical Datasheet / Catalogue of Battery operated power trolleys, 2000 kg
capacity
93 NMDC/MACO/16C/00/01/BE/0083 Technical Datasheet / Catalogue of Hand trolleys
94 NMDC/MACO/16C/00/01/BE/0084 Technical Datasheet / Catalogue of Scrap buckets / chip bins
 95 NMDC/MACO/16C/00/01/BE/0085 Technical Datasheet / Catalogue of Laboratory glassware & reagents
96 NMDC/MACO/16C/00/01/BE/0086 Technical Datasheet / Catalogue of Personal computer
97 NMDC/MACO/16C/00/01/BE/0087 Technical Datasheet / Catalogue of DN type laser Jet Printers
98 NMDC/MACO/16C/00/01/BE/0088 Technical Datasheet / Catalogue of Flatbed scanners
99 NMDC/MACO/16C/00/01/BE/0089 Technical Datasheet / Catalogue of UPS for computers
100 NMDC/MACO/16C/00/01/BE/0090 Technical Datasheet / Catalogue of Multi-purpose XEROX machine
101 NMDC/MACO/16C/00/01/BE/0091 Technical Datasheet / Catalogue of Portable stroboscope for surface tester

Sr. No. NMDC Dwg No. Drawing Description

102 NMDC/MACO/16C/00/01/BE/0092 Technical Datasheet / Catalogue of Portable stress analyser
103 NMDC/MACO/16C/00/01/BE/0093 Technical Datasheet / Catalogue of Mobile spectrometer
104 NMDC/MACO/16C/00/01/BE/0094 Technical Datasheet / Catalogue of Dust vacuum cleaner
105 NMDC/MACO/16C/00/01/BE/0095 Technical Datasheet / Catalogue of Marking machine for tensile stress test
specimens
106 NMDC/MACO/16C/00/01/BE/0096 Technical Datasheet / Catalogue of Set of tools including
mechanical/electric & Electric/electronics
107 NMDC/MACO/16C/00/01/BE/0097 Technical Datasheet / Catalogue of Electric engraver
108 NMDC/MACO/16C/00/01/BE/0098 Technical Datasheet / Catalogue of Box of marking punches for
steelmarking (letters) – 27 “Capital Letters”
109 NMDC/MACO/16C/00/01/BE/0099 Technical Datasheet / Catalogue of Box of marking punches for
steelmarking (numbers) – 6 mm height
110 NMDC/MACO/16C/00/01/BE/0100 Technical Datasheet / Catalogue of Flexible tape rule- 2.5 mtrs.
111 NMDC/MACO/16C/00/01/BE/0101 Technical Datasheet / Catalogue of Files for steel – 12ʺ length
112 NMDC/MACO/16C/00/01/BE/0102 Technical Datasheet / Catalogue of Protective hand gloves
113 NMDC/MACO/16C/00/01/BE/0103 Technical Datasheet / Catalogue of Protective eye glass
114 NMDC/MACO/16C/00/01/BE/0104 Technical Datasheet / Catalogue of Glassware and reagents for
metallographic examination
115 NMDC/MACO/16C/00/01/BE/0105 Technical Datasheet / Catalogue of Set of hand tools
116 NMDC/MACO/16C/00/01/BE/0106 Technical Datasheet / Catalogue of Set of measuring tools
117 NMDC/MACO/16C/00/01/BE/0107 Technical Datasheet / Catalogue of Public Address System (Audio-Visual)

118 NMDC/MACO/16C/00/01/BE/0108 Technical Datasheet / Catalogue of Laboratory furniture (Technological &

non- technological)
119 NMDC/MACO/16C/00/01/BE/0109 Technical Datasheet / Catalogue of Motorised Broach cutting machine
120 NMDC/MACO/16C/00/01/BE/0110 Technical Datasheet / Catalogue of Liquid Nitrogen containers,100 Ltr each

121 NMDC/MACO/16C/00/01/BE/0111 Technical Datasheet / Catalogue of Notch Profile shadow Projector

122 NMDC/MACO/16C/00/01/BE/0112 Technical Datasheet / Catalogue of Dynamometers (Strain Gauge type pancack
design load cell
123 NMDC/MACO/16C/00/01/BE/0113 Technical Datasheet / Catalogue of Magnetic Sweepers
124 NMDC/MACO/16C/00/01/BE/0114 Technical Datasheet / Catalogue of Gas cutting Machine
125 NMDC/MACO/16C/00/01/BE/0115 Technical Datasheet / Catalogue of Welding machines transformer type
Sr. No. NMDC Dwg No. Drawing Description
Technical Datasheet / Catalogue of Electrically operated microprocessor based
126 NMDC/MACO/16C/00/01/BE/0116 PM2.5/10 Fine Particulate Dust sampler along with gaseous sampling
attachment.
127 NMDC/MACO/16C/00/01/BE/0117 Technical Datasheet / Catalogue of Stack monitoring kit
128 NMDC/MACO/16C/00/01/BE/0118 Technical Datasheet / Catalogue of Portable flue gas analyzer for stack
monitoring
129 NMDC/MACO/16C/00/01/BE/0119 Technical Datasheet / Catalogue of Ion analyser
130 NMDC/MACO/16C/00/01/BE/0120 Technical Datasheet / Catalogue of Hot air oven
131 NMDC/MACO/16C/00/01/BE/0121 Technical Datasheet / Catalogue of Hot plate
132 NMDC/MACO/16C/00/01/BE/0122A Technical Datasheet / Catalogue of Muffle furnace
133 NMDC/MACO/16C/00/01/DE/0122B GA of Muffle furnace (for environmental testing facilities)
134 NMDC/MACO/16C/00/01/BE/0123 Technical Datasheet / Catalogue of BOD incubator
135 NMDC/MACO/16C/00/01/BE/0124 Technical Datasheet / Catalogue of BOD analyser
136 NMDC/MACO/16C/00/01/BE/0125 Technical Datasheet / Catalogue of DO meter
137 NMDC/MACO/16C/00/01/BE/0126 Technical Datasheet / Catalogue of Spectrophotometer
138 NMDC/MACO/16C/00/01/BE/0127 Technical Datasheet / Catalogue of COD digestion assembly
139 NMDC/MACO/16C/00/01/BE/0128 Technical Datasheet / Catalogue of pH meter
140 NMDC/MACO/16C/00/01/BE/0129 Technical Datasheet / Catalogue of Conductivity meter
141 NMDC/MACO/16C/00/01/BE/0130 Technical Datasheet / Catalogue of Atomic absorption spectrophotometer (aas)
– gta / vga
142 NMDC/MACO/16C/00/01/BE/0131 Technical Datasheet / Catalogue of Weighing balance (micro balance)
143 NMDC/MACO/16C/00/01/BE/0132 Technical Datasheet / Catalogue of Top loading balance
144 NMDC/MACO/16C/00/01/BE/0133 Technical Datasheet / Catalogue of Filtration assembly
145 NMDC/MACO/16C/00/01/BE/0134 Technical Datasheet / Catalogue of Vacuum pump for filtration assembly
146 NMDC/MACO/16C/00/01/BE/0135 Technical Datasheet / Catalogue of Heating mantle
147 NMDC/MACO/16C/00/01/BE/0136 Technical Datasheet / Catalogue of Refrigerator
148 NMDC/MACO/16C/00/01/BE/0137 Technical Datasheet / Catalogue of Water bath
149 NMDC/MACO/16C/00/01/BE/0138 Technical Datasheet / Catalogue of Fume chamber
150 NMDC/MACO/16C/00/01/BE/0139 Technical Datasheet / Catalogue of Turbidity meter
151 NMDC/MACO/16C/00/01/BE/0140 Technical Datasheet / Catalogue of Portable oxygen meter
152 NMDC/MACO/16C/00/01/BE/0141 Technical Datasheet / Catalogue of Portable photometer with reagents for cod,
total hardness, chloridee, chlorine
153 NMDC/MACO/16C/00/01/BE/0142 Technical Datasheet / Catalogue of Auto titrator
154 NMDC/MACO/16C/00/01/BE/0143 Technical Datasheet / Catalogue of Dessicators
Sr. No. NMDC Dwg No. Drawing Description
155 NMDC/MACO/16C/00/01/BE/0144 Technical Datasheet / Catalogue of Flame photometer
156 NMDC/MACO/16C/00/01/BE/0145 Technical Datasheet / Catalogue of Glass ware & plastic ware for titration

157 NMDC/MACO/16C/00/01/BE/0146 Technical Datasheet / Catalogue of Orsat apparatus

158 NMDC/MACO/16C/00/35/AS/0147 Civil foundation assignment of Equipments
159 NMDC/MACO/16C/00/20/AS/0148 Heat load calculation for individual rooms housing eqpts
160 NMDC/MACO/16C/00/25/AS/0149 Electrical load list for all Equipments
161 NMDC/MACO/16C/00/15-16/AS/0150 Utility requirements (water / compressed air) for Equipments as applicable
SPECTRIS DRGS
162 NMDC/SPEC/16C/00/01/BE/0151 Technical Datasheet / Catalogue of Wave length dispersive type sequential X-
ray fluorescence Spectrometer

163 NMDC/SPEC/16C/00/01/BE/0152 Technical Datasheet / Catalogue of X-ray diffractometer

164 NMDC/SPEC/16C/00/01/BE/0153 Technical Datasheet / Catalogue of Fusion bead making machine
AIMIL DRGS
165 NMDC/AIMIL/16C/00/01/BE/0154 Technical Datasheet / Catalogue of Hydraulic press
166 NMDC/AIMIL/16C/00/01/BE/0155 Technical Datasheet / Catalogue of Manual-cum-automatic metallographic
sample cut-off machine

167 NMDC/AIMIL/16C/00/01/BE/0156 Technical Datasheet / Catalogue of Microprocessor controlled semi-automatic

grinding-cum- polishing machine

168 NMDC/AIMIL/16C/00/01/BE/0157 Technical Datasheet / Catalogue of Automatic metallographic specimen

mounting press

Technical Datasheet / Catalogue of Bulk specimen and thin section preparation

system for minerals/coal for reflected/transmitted light microscopy
169 NMDC/AIMIL/16C/00/01/BE/0158

170 NMDC/AIMIL/16C/00/01/BE/0159A Technical Datasheet / Catalogue of Computer controlled universal testing

machine, 100 t

171 NMDC/AIMIL/16C/00/01/DE/0159B GA of Computer controlled universal testing machine, 100 t

172 NMDC/AIMIL/16C/00/01/BE/0160A Technical Datasheet / Catalogue of Computer controlled universal testing
machine, 40 t

173 NMDC/AIMIL/16C/00/01/DE/0160B GA of Computer controlled universal testing machine, 40 t

174 NMDC/AIMIL/16C/00/01/BE/0161A Technical Datasheet / Catalogue of Instrumented impact testing machine with
facility for sub-zero testing

175 NMDC/AIMIL/16C/00/01/DE/0161B GA of Instrumented impact testing machine with facility for sub-zero testing

Sr. No. NMDC Dwg No. Drawing Description

176 NMDC/AIMIL/16C/00/01/BE/0162 Technical Datasheet / Catalogue of Computerised brinell hardness tester
 177 NMDC/AIMIL/16C/00/01/BE/0163 Technical Datasheet / Catalogue of Rockwell-cum-rockwell superficial hardness
tester

178 NMDC/AIMIL/16C/00/01/BE/0164 Technical Datasheet / Catalogue of Vickers hardness tester

179 NMDC/AIMIL/16C/00/01/BE/0165A Technical Datasheet / Catalogue of Computer controlled bending and folding
machine, 50 t

180 NMDC/AIMIL/16C/00/01/DE/0165B GA of Computer controlled bending and folding machine, 50 t

181 NMDC/AIMIL/16C/00/01/BE/0166A Technical Datasheet / Catalogue of Computer controlled bending and folding
machine, 100 t

182 NMDC/AIMIL/16C/00/01/DE/0166B GA of Computer controlled bending and folding machine, 100 t

183 NMDC/AIMIL/16C/00/01/BE/0167 Technical Datasheet / Catalogue of Portable surface roughness tester
184 NMDC/AIMIL/16C/00/01/BE/0168 Technical Datasheet / Catalogue of Portable field microscope
185 NMDC/AIMIL/16C/00/01/BE/0169 Technical Datasheet / Catalogue of Integrating averaging sound level meter

186 NMDC/AIMIL/16C/00/01/BE/0170 Technical Datasheet / Catalogue of Automatic weather station

INSMART DRGS
187 NMDC/INSMART/16C/00/01/BE/0171A Technical Datasheet / Catalogue of Swing grinding mill
188 NMDC/INSMART/16C/00/01/DE/0171B GA of Swing grinding mill
189 NMDC/INSMART/16C/00/01/BE/0172A Technical Datasheet / Catalogue of Briquetting press
190 NMDC/INSMART/16C/00/01/DE/0172B GA of Briquetting press
191 NMDC/INSMART/16C/00/01/BE/0173A Technical Datasheet / Catalogue of Pin cutting machine
192 NMDC/INSMART/16C/00/01/DE/0173B GA of Pin Cutting Machine
193 NMDC/INSMART/16C/00/01/BE/0174A Technical Datasheet / Catalogue of Mixer machine
194 NMDC/INSMART/16C/00/01/DE/0174B GA of of Mixer machine
195 NMDC/INSMART/16C/00/01/BE/0175A Technical Datasheet / Catalogue of Jaw crusher
196 NMDC/INSMART/16C/00/01/DE/0175B GA of Jaw crusher
197 NMDC/INSMART/16C/00/01/BE/0176A Technical Datasheet / Catalogue of Roll crusher
198 NMDC/INSMART/16C/00/01/DE/0176B GA of Roll crusher
199 NMDC/INSMART/16C/00/01/BE/0177A Technical Datasheet / Catalogue of Riffle sample splitter
200 NMDC/INSMART/16C/00/01/DE/0177B GA of of Riffle sample splitter
201 NMDC/INSMART/16C/00/01/BE/0178A Technical Datasheet / Catalogue of Ro-tap Sieve Shaker & Ty-lab Sieve Shaker

202 NMDC/INSMART/16C/00/01/DE/0178B GA of of Ro-tap Sieve Shaker & Ty-lab Sieve Shaker

Sr. No. NMDC Dwg No. Drawing Description

Basic Engg Approval (BE - A) Nomenclatures
Basic Engg Reference (BE - R) Baisc Engineering =
Detail Engg Approval (DE - A) Detail Engineering =
Detail Engg Reference (DE - R) Civil Assignment =
Civil Assignment (AS-R) Approval =
TOTAL Reference =
Note: In case drawings are to be added for completion of detail engineering in addition to the drawings listed above then further
drawing would be added accordingly, vise versa in case detailed engineering can be completed with fewer drawings
without prejudice to completeness of scope, than extra drawing would be deleted.

DRAWING
TITLE SHEET
ng Description Out Put Communication port

ng
Direct reading spark type optical emission

Oil analysis spectrometer

Spectrographic Sample cut-off machine

Melting and casting equipment

t
Sample drilling machine
Oxygen–nitrogen–hydrogen anlyser
Automated ultimate analyser
Scanning electron microscope along with

Metallurgical microscope with image

ndentor
of Coal petrological microscope
Universal sheet metal testing machine

machine
Furnace for strain ageing test at 250°C

at 250°C
Furnace for strain ageing test at 350°C

at 350°C
Furnace for heat treatment

Salt spray chamber and humidity chamber

l)
dity chamber (for corrosion testing of Hot

ng Description
Quenching tank

Horizontal power hacksaw

Automatic double column band saw machine

Circular saw for steel sample cutting

CNC unniversal type saw sharpening

Pedestal grinder
Non-CNC lathe
CNC lathe
CNC vertical milling machine
CNC universal milling machine
CNC horizontal machining centre
CNC Laser sample cutting machine (Profile

Surface grinder
Shaping machine
Column drilling machine
Spalling resistance test facilities for

Pyrometric cone equivalent furnace for

RUL furnace for refractory bricks

ks
Thermal conductivity tester for refractory

Apparatus for determination of hot modulus

Apparatus for determination of apparent

Compression testing machine for

gth of refractory bricks

ng Description
High temperature furnace (Temperature

mperature range 1700°C to 1800°C)

Radiation pyrometer (Laser type)
Platform scale
Electronic platform type weighing scale

Refractory brick cutting machine

Grinding machine
Drilling machine for refractories
Apparatus of determination of bulk density of
Facility for determination of thermal

Apparatus for determination of softening

ters/ pellets/ lumps
Apparatus for determination of Reducibility
n Index (RDI) of iron ore sinters/

Raymond mill
Drilling machine
Pensky martens flash point apparatus for

Redwood viscometer
Cloud point and pour point apparatus for

Dean and stark apparatus

Apparatus for moisture measurement

Portable automatic particle counter

Apparatus for determination of consistency

Apparatus for determination of thermal

ng Description
ent viscosity of lubricating grease
Oil emulsion tester (water-in-oil)
Oil emulsion tester (oil-in-water)
Apparatus for wear-iron metal analysis

Fume hood
Double analytical table
Electric top loading balance
Precision analytical balance
Water bath
Refrigerator
Ultra pure water purification system
Drying oven
Muffle furnace
analysis equipment)
Hot plate
Hot plate-cum-magnetic stirrer
Digital pH meter
Digital conductivity meter
Dissolved oxygen meter
Fume hood
Double analytical table
Battery operated power trolleys, 2000 kg

Hand trolleys
Scrap buckets / chip bins
Laboratory glassware & reagents
Personal computer
DN type laser Jet Printers
Flatbed scanners
UPS for computers
Multi-purpose XEROX machine
Portable stroboscope for surface tester

ng Description
Portable stress analyser
Mobile spectrometer
Dust vacuum cleaner
Marking machine for tensile stress test

Set of tools including

ctronics
Electric engraver
Box of marking punches for
al Letters”
Box of marking punches for
height
Flexible tape rule- 2.5 mtrs.
Files for steel – 12ʺ length
Protective hand gloves
Protective eye glass
Glassware and reagents for

Set of hand tools

Set of measuring tools
Public Address System (Audio-Visual)

Laboratory furniture (Technological &

Motorised Broach cutting machine

Liquid Nitrogen containers,100 Ltr each

Notch Profile shadow Projector

Dynamometers (Strain Gauge type pancack

Magnetic Sweepers
Gas cutting Machine
Welding machines transformer type
ng Description
Electrically operated microprocessor based
mpler along with gaseous sampling

Stack monitoring kit

Portable flue gas analyzer for stack

on analyser
Hot air oven
Hot plate
Muffle furnace
ntal testing facilities)
BOD incubator
BOD analyser
DO meter
Spectrophotometer
COD digestion assembly
pH meter
Conductivity meter
Atomic absorption spectrophotometer (aas)

Weighing balance (micro balance)

Top loading balance
Filtration assembly
Vacuum pump for filtration assembly
Heating mantle
Refrigerator
Water bath
Fume chamber
Turbidity meter
Portable oxygen meter
Portable photometer with reagents for cod,

Auto titrator
Dessicators
ng Description
Flame photometer
Glass ware & plastic ware for titration

Orsat apparatus
ments
oms housing eqpts

sed air) for Equipments as applicable

Wave length dispersive type sequential X-

X-ray diffractometer
Fusion bead making machine

Hydraulic press
Manual-cum-automatic metallographic

Microprocessor controlled semi-automatic

Automatic metallographic specimen

Bulk specimen and thin section preparation

d/transmitted light microscopy

Computer controlled universal testing

testing machine, 100 t

Computer controlled universal testing

testing machine, 40 t
Instrumented impact testing machine with

achine with facility for sub-zero testing

ng Description
Computerised brinell hardness tester
Rockwell-cum-rockwell superficial hardness

Vickers hardness tester

Computer controlled bending and folding

and folding machine, 50 t

Computer controlled bending and folding

and folding machine, 100 t

Portable surface roughness tester
Portable field microscope
Integrating averaging sound level meter

Automatic weather station

Swing grinding mill

Briquetting press

Pin cutting machine

Mixer machine

Jaw crusher

Roll crusher

Riffle sample splitter

Ro-tap Sieve Shaker & Ty-lab Sieve Shaker

Sieve Shaker

ng Description
Nomenclatures
Baisc Engineering =
Detail Engineering =
Civil Assignment =
Approval =
Reference =
o the drawings listed above then further
be completed with fewer drawings