D ATA S H E E T
Nemo Handy/Nemo Walker Air
R&S®TSMA6 Autonomous Mobile Network Scanner
Fast, effective testing of complex in-building or outdoor
wireless networks
Combine Nemo Handy or Nemo Walker Air with R&S®TSMA6 Autonomous Mobile
Network Scanner for fast, effective testing of complex in-building or outdoor
wireless networks. This data sheet lists parameters and features available with
R&S®TSMA6 Autonomous Mobile Network Scanner and Nemo Handy/Nemo
Walker Air.
Supported Bands:
• NR 1-3, 5, 7-8, 12, 20, 25, 28, 34, 38-41, 51, 66, 70-71, 75- 79
• WiFi: 2400, 2500, WiFi device band
• LTE FDD 1-5, 7-14, 17-21, 24-31, 66, 70-71
• LTE TDD 33-43, 48, 87
• CDMA 450 MHz, 800 MHz, 1900 MHz (band class 1)
• EVDO 450, 800, 1900 MHz
• UMTS FDD 2100, 1900, 1800, 2100 AWS, 850, 800, 900, band 10
• GSM 850, 900, 1800, 1900
Find us at www.keysight.com Page 1
Scanning types
GSM Frequency Scan
Configuration:
• Band (GSM bands)
- Scanner Front-End (1, 2, default: Automatic)
- Scanner Demodulation Front-end (1, 2, default: Automatic)
- Measurement Rate (in Hz) (range: 1-800ms, default: 100ms)
- Bsic decoding (on/off, default: off)
- C/I (on/off, default: off)
* Cell Information Decoding (on/off, default: off)
- SIB Signaling (on/off, default: off)
- Channels
Reported:
• CELLSCAN:
- Measured system
- Band
- ARFCN
- BSIC
- MCC (when Cell Information Decoding is on)
- MNC (when Cell Information Decoding is on)
- LAC (when Cell Information Decoding is on)
- Cell ID (when Cell Information Decoding is on)
• FREQSCAN
- Measured system
- Band
- ARFCN
- BSIC
- RX level
- C/I
- SCH RX level
Find us at www.keysight.com Page 2
• L3SM (when SIB signaling in on)
- Measured system
- Direction (hardcoded “downlink”, not received from the scanner)
- L3 msg
- Subchannel (hardcoded “BCCH”, not received from the scanner)
- Channel
- BSIC
- Type (hardcoded “normal”, not received from the scanner)
- L3 data
Pilot Scan
Configuration:
• Band (CDMA, EVDO)
- Scanner Front-End (1, 2, default: Automatic)
- Scanner Demodulation Front-end (1, 2, default: Automatic)
- Pilot Ec/Io Threshold (range: -30-0, default CDMA: -15, default EVDO: -9)
- Pilot Increment (range: 1-512, default: 1)
- Top-N (on/off, default: on)
- Number of Signals (range: 1-16, default: 16)
- Delay Spread (on/off, default: off)
- SIB Signaling (on/off, defaul: off)
- Channels
Reported:
• PILOTSCAN: (CDMA, EVDO)
- Measured system
- Channel
* Carrier RSSI
- Band
- Number of cells
* Pilot number
- Ec/Io
- Timing offset
- RSCP
* Delay spread
Find us at www.keysight.com Page 3
WCDMA Top-N Pilot Scan (TSMA6 scan type: WCDMA Top-N Pilot Scan)
Configuration:
• Band (CDMA, EVDO)
- Measurement Rate (in Hz) (range 1-300ms, default: 100ms)
- Measurement Mode
* High Speed
* High Dynamic
- Scanner Front-end (1, 2, default: Automatic)
- Scanner Demodulation Front-end (1, 2, default: Automatic)
- Pilot Ec/Io Threshold (range: -33-0, default: -30)
- Top-N (on/off, default: on)
- Number of Signals (range: 1-16, default: 16)
- Cell Information Decoding (on/off, default: off)
- Time Of Arrival (on/off, default: off)
- Delay Spread (on/off, default: off)
- Missing Neighbor Detection (on/off, defaul: off)
- Neighbor List Decoding (on/off, defaul: off)
- P-SCH (on/off, defaul: off)
- SIR (on/off, defaul: off)
- S-SCH (on/off, defaul: off)
- SIB Signaling (on/off, defaul: off)
Reported:
• CELLSCAN:
- Measured system
- Band
- Channel
- Scrambling code
- MCC (when Cell Information Decoding is on)
- MNC (when Cell Information Decoding is on)
- LAC (when Cell Information Decoding is on)
- Cell ID (when Cell Information Decoding is on)
Find us at www.keysight.com Page 4
• PILOTSCAN:
- Measured system
- Channel
- UMTS channel type (hardcoded “CPICH”, not received from the scanner)
- Carrier RSSI
- Band
- Scrambling code
- Ec/N0
- RSCP
- SIR
- Timing offset
- Delay spread
• RRCSM: (when SIB signalling is on)
- Measured system
- Direction (hardcoded “downlink”, not received from the scanner)
- RRC message name
- Subchannel (hardcoded “BCCH”, not received from the scanner)
- UARFCN
- RRC scrambling code
- RRC data
LTE OFDM Scan (TSMA6 scan type: LTE Top Signal Scan)
Configuration
• Band (LTE)
• Bandwidth: 1,4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz, 20 MHz, Auto (default)
- Scanner Demodulation Front-end (1, 2, default: Automatic)
- Cyclic Prefix
* Normal 15kHz
* Extended 15kHz
* Automatic (default)
- Scanner Front-End (1, 2, default: Automatic)
• Signal Mode
- Standard (default)
- 5G/4G Spectrum Sharing
• Top-N (on/off, defaul: on)
Find us at www.keysight.com Page 5
• Number of Signals: (range: 1-16, default: 16)
- Cell Information Decoding (on/off, default: off)
- CINR (on/off, default: on)
- Time Offset (on/off, default: on)
- Delay Spread (on/off, default: on)
- Sync Signal (on/off, default: on)
- Reference Signal (on/off, default: on)
• SIB Signaling (on/off, default: off)
- Narrow Band Scanning (on/off, default: off)
* MIMO Scan (on/off, default:off)
- Signal Mode: (SCANNER_MIMO_2X2, SCANNER_MIMO_2X4,
SCANNER_MIMO_4X4, SCANNER_MIMO_2X2_4X4, default:
SCANNER_MIMO_2X2)
* LTE-M (on/off, default:off)
* eMBMS (on/off, default:off)
• Channels
Reported:
• OFDMSCAN (LTE RS):
- Channel type (hardcoded “RS”, not received from the scanner)
- DL bandwidth
- Carrier RSSI
- Band
- PCI
- Cyclic prefix DL
- Cell TX antennas
- RSRP
- RSRQ
- CINR
- Timing offset
- Delay spread
- Scanning result indication (not received from the scanner)
- Measurement results per antenna port:
* PCI
* Antenna port
Find us at www.keysight.com Page 6
* RSRP/P
* RSRQ/P
* CINR/P
* RSSI/P
CW RSSI Scan (TSMA6 scan type: CW Scan)
Configuration:
• Band (GSM, WCDMA, CDMA, EVDO, LTE, NR bands)
• Bandwidth:
- 10 kHz
- 12.5 kHz
- 30 KHz
- 200 KHz
- 1.25 mHz
- 3.84 mHz
- 5 mHz
- 10 mHz
- 15 mHz
- 20 mHz
- Channels
Reported:
• FREQSCAN (GSM):
- Measured system
- Band
- Channel
- BSIC
- RX level
• FREQSCAN (WCDMA, CDMA, EVDO, LTE, NR):
- Measured system
- Band
- Channel
- Carrier RSSI
Find us at www.keysight.com Page 7
Blind Scan (TSMA6 scan type: ACD Scan)
Configuration:
• LTE bands
• NR bands
• WCDMA bands
• GSM bands
Reported:
• PILOTSCAN (WCDMA)
- Measured system
- Band
- Channel
- Channel type (hardcoded “CPICH”, not received from the scanner)
- Carrier RSSI
• OFDMSCAN (LTE):
- Measured system
- Band
- Channel
- Physical channel or signal type (hardcoded “RS”, not received from the scanner)
• OFDMSCAN (NR):
- Measured system
- Band
- NR-ARFCN
NR Top-N Signal Scan (TSMA6 scan type: NR Top-N Signal Scan)
Configuration:
• Band (NR bands)
• SSB Periods (range: 5-160ms, default: 20ms)
• Subcarrier Spacing
*CASE A - 15 kHz (default)
*CASE B - 30 kHz
*CASE C - 30 kHz
Find us at www.keysight.com Page 8
*CASE D - 120 kHz
*CASE E - 240 kHz
- Delay Spread: (on/off, default: off)
• SIB Signaling: (on/off, default: off)
• Channel / Frequency
Reported:
• OFDMSCAN:
- Measured system
- Band
- NR-ARFCN
- PCI
- Beam index
- Numerology (subcarrier spacing)
- PS-RSRP
- PS-RSRQ
- PS-SINR
- SS-RSRP
- SS-RSRQ
- SS-SINR
- PBCH DM-RP
- PBCH DM-RQ
- PBCH DM-SINR
- SSB-RSRP
- SSB-RSRQ
- SSB SINR
Spectrum Analysis Scan (TSMA6 scan type: RF Power Scan)
Configuration:
• Predefined scanning sets
- Measurement Rate (in Hz) (range: 3-50ms, default: 3ms)
- Scanner Front-End (1, 2, default: Automatic)
- Resolution Bandwidth
* 3750
* 7500
Find us at www.keysight.com Page 9
* 15000
* 30000
* 60000
* 120000
* 240000
- Start frequency / Center frequency
- Preamplifier: (on/off, default: off)
Reported:
• SPECTRUMSCAN:
- Bandwidth
- Sweep bandwidth
- Sweep frequency
- Sweep average RX level
- Sweep minimum RX level
- Sweep maximum RX level
- WLAN service set identifier
- Sweep total RX level
- Frequency
- RX level
Learn more at: www.keysight.com
For more information on Keysight Technologies’ products, applications or services,
please contact your local Keysight office. The complete list is available at:
www.keysight.com/find/contactus
Find us at www.keysight.com Page 10
This information is subject to change without notice. © Keysight Technologies, 2018 - 2022, Published in USA, April 27, 2022, 7121-1102.EN
