AS 332

MASTER SERVICING MANUAL (MSM)

AS 332
L2

Issue date : 2012.11.29

Revision 006 : 2016.07.18

Airbus Helicopters
Direction Technique Support
Aéroport International Marseille Provence 13725 Marignane Cedex FRANCE
Contact: [email protected]
 MSM

RECORD OF REVISIONS
 MSM

LOEDU

1 Update

Refer to the "Update" Document Unit

2 "Type" Column Code

N-New, to be inserted
R-Revised, to be replaced
D-To be removed from the manual
- (No code) Unchanged with respect to the previous issue

D.U. Type Date D.U. Type Date

TITLE N 2016.07.18 05-10-00 ATA 36 - 2013.12.12
LOEDU N 2016.07.18 05-10-00 ATA 45 - 2012.11.29
TABLE OF CONTENTS N 2016.07.18 05-10-00 ATA 49 - 2014.06.12
HIGHLIGHTS OF THE N 2016.07.18 05-10-00 ATA 62 - 2013.12.12
REVISION 05-10-00 ATA 63 - 2015.01.15
TECHNICAL - 2014.06.12 -
05-10-00 ATA 64 2012.11.29
PUBLICATIONS
05-10-00 ATA 65 - 2012.11.29
GLOSSARY - 2013.12.12
05-10-00 ATA 67 - 2012.11.29
STRUCTURE OF THE - 2014.06.12
MSM 05-20-00 ATA 05 - 2013.12.12
UPDATE OF THE MSM - 2015.01.15 05-20-00 ATA 08 - 2012.11.29
BREAKDOWN OF THE - 2014.06.12 05-20-00 ATA 21 R 2016.07.18
MSM 05-20-00 ATA 22 - 2012.11.29
USE OF THE MSM - 2015.10.29 05-20-00 ATA 23 - 2015.01.15
OPTIONAL - 2015.10.29 05-20-00 ATA 24 - 2015.10.29
SB INCORPORATED R 2016.07.18 05-20-00 ATA 25 R 2016.07.18
05-10-00 ATA 21 R 2016.07.18 05-20-00 ATA 26 R 2016.07.18
05-10-00 ATA 22 - 2015.01.15 05-20-00 ATA 28 - 2015.01.15
05-10-00 ATA 23 - 2015.10.29 05-20-00 ATA 29 R 2016.07.18
05-10-00 ATA 24 - 2015.10.29 05-20-00 ATA 30 - 2015.10.29
05-10-00 ATA 25 R 2016.07.18 05-20-00 ATA 31 - 2012.11.29
05-10-00 ATA 26 - 2015.10.29 05-20-00 ATA 32 - 2013.12.12
05-10-00 ATA 28 - 2013.12.12 05-20-00 ATA 33 - 2015.10.29
05-10-00 ATA 29 - 2015.01.15 05-20-00 ATA 34 - 2012.11.29
05-10-00 ATA 30 - 2015.01.15 05-20-00 ATA 36 - 2012.11.29
05-10-00 ATA 32 R 2016.07.18 05-20-00 ATA 45 - 2015.10.29
05-10-00 ATA 33 - 2015.01.15 05-20-00 ATA 49 - 2012.11.29
05-10-00 ATA 34 - 2012.11.29 05-20-00 ATA 52 - 2015.10.29

AS 332 L2
LOEDU
2016.07.18 Page 1
 MSM

D.U. Type Date D.U. Type Date

05-20-00 ATA 53 R 2016.07.18 05-20-00 ATA 77 - 2012.11.29
05-20-00 ATA 55 - 2012.11.29 05-20-00 ATA 79 - 2012.11.29
05-20-00 ATA 56 R 2016.07.18 05-20-00 ATA 80 - 2012.11.29
05-20-00 ATA 60 - 2013.12.12 05-20-00 ATA 93 - 2012.11.29
05-20-00 ATA 62 - 2015.10.29 05-50-00 ATA 28 - 2012.11.29
05-20-00 ATA 63 R 2016.07.18 05-50-00 ATA 30 - 2012.11.29
05-20-00 ATA 64 - 2015.10.29 05-50-00 ATA 32 - 2012.11.29
05-20-00 ATA 65 R 2016.07.18 05-50-00 ATA 62 - 2013.12.12
05-20-00 ATA 67 R 2016.07.18 05-50-00 ATA 63 R 2016.07.18
05-20-00 ATA 71 - 2012.11.29 05-50-00 ATA 64 - 2013.12.12
05-20-00 ATA 72 - 2012.11.29 05-52-00 ATA 53 - 2013.12.12
05-20-00 ATA 76 - 2015.10.29

End of the Document Unit

AS 332 L2
LOEDU
2016.07.18 Page 2
 MSM

TABLE OF CONTENTS

TITLE
HIGHLIGHTS OF THE REVISION
1 GENERAL
2 OUTLINE OF THE REVISION
3 DETAILED DESCRIPTION
3.1 Section SB INCORPORATED
3.2 Section 05.10.00
3.3 Section 05.20.00
3.4 Section 05.50.00
TECHNICAL PUBLICATIONS
1 THE DOCUMENTATION
2 OPERATION DOCUMENTS
3 MAINTENANCE DOCUMENTS
4 IDENTIFICATION DOCUMENTS
5 SPECIAL DOCUMENTS
6 VENDOR'S DOCUMENTS
GLOSSARY
STRUCTURE OF THE MSM
1 GENERAL STRUCTURE OF THE MSM
2 BREAKDOWN OF THE MSM
2.1 Identification of the DUs
2.2 Task codes
2.3 List Of Effective Document Units (LOEDU)

3 CLASSIFICATION OF INFORMATION
UPDATE OF THE MSM
1 REVISION OF THE MSM
2 UPDATE OF THE MSM
2.1 Update procedure

2.2 Identification of the modifications

3 CUSTOMER COMPLEMENT (CC): ISSUED ON A GREEN BACKGROUND

4 EFFECTIVITY
BREAKDOWN OF THE MSM

AS 332 L2
TABLE OF CONTENTS
2016.07.18 Page 1
 MSM

TITLE
1 PURPOSE OF THE MSM
2 CHANGES TO THE MSM
3 HELICOPTER MAINTENANCE
4 TYPES OF MAINTENANCE
5 DEFINITION OF THE MAINTENANCE MODES
5.1 Hard time maintenance
5.2 On-Condition maintenance
5.3 Condition monitoring maintenance

6 EFFECTIVITY - RESPONSIBILITY
7 MAINTENANCE INTERVAL
7.1 Daily checks

7.1.1 Cold weather and very cold weather routine check

7.1.2 Check of Optional Installations

7.2 Additional inspection (S)

7.3 Basic inspection (T or A)

7.4 Major Inspection

8 CFE (CUSTOMER FURNISHED EQUIPMENT) MAINTENANCE

USE OF THE MSM

1 ADAPTATION OF THE MSM
2 INFORMATION FEEDBACK FROM THE OPERATOR TO THE MANUFACTURER
3 IN-SERVICE MONITORING
3.1 Airframe monitoring

3.2 Monitoring of components

3.3 Specific case of elastomer hoses

4 COMPONENT PART NUMBERS

4.1 Definition
4.2 Part Number followed by a suffix

4.3 Applicability of the limits

4.4 Changes to Part Numbers

5 EXPRESSION OF THE LIMITS

5.1 Flight Hours

5.2 Calendar time

AS 332 L2
TABLE OF CONTENTS
2016.07.18 Page 2
 MSM

TITLE
5.2.1 Airframe initial aging date

5.2.2 Initial aging date for components

5.3 Cycles

5.4 Provisional limitations

5.5 Periodic and Perform Once limits
5.6 Performance interval
5.7 Specific and severe atmospheric operating conditions

5.8 Maximum limit value

5.8.1 Definition of the margin

5.8.2 Application of the margin

5.8.3 Specification of the margin

5.8.4 Example of how the margin is used

6 AUTHORIZATION TO TRANSFER A COMPONENT (PART OR ASSEMBLY) FROM ONE AIRCRAFT

VERSION TO ANOTHER AIRCRAFT VERSION
6.1 Versions on which the transfer of components is applicable

6.2 Components NOT subject to In-Service Monitoring (Condition Monitoring)

6.3 Components subject to In-Service Monitoring

6.3.1 Components subject to a Service Life Limit (SLL)

6.3.2 Components subject to Time Between Overhauls (TBO), Operating Time Limit (OTL), On-Condition
maintenance (OC)

7 RECORDING
8 MAINTENANCE CODES (MC)

9 CONTENT OF A TASK
OPTIONAL
1 COMPATIBILITY / INCOMPATIBILITY
2 TABLE OF APPROVED OPTIONAL INSTALLATIONS
SB INCORPORATED

End of the Document Unit

AS 332 L2
TABLE OF CONTENTS
2016.07.18 Page 3
 MSM

HIGHLIGHTS OF THE REVISION

1 GENERAL

- Check that the content of the sections is in accordance with the List Of Effective Document Units
(LOEDU).
- Return the acknowledgment card.

2 OUTLINE OF THE REVISION

The revision is codified as follows:

- Revision 006 2016.07.18

3 DETAILED DESCRIPTION
3.1 Section SB INCORPORATED
SB 29.00.19 R0 incorporated

3.2 Section 05.10.00

21-50 OPT - AIR CONDITIONING SYSTEM

- 21/50/00/000/000/010
SECAN HP air conditioning unit - Fan
Limit Type modified and interval deleted

25-66 OPT - EMERGENCY EQUIPMENTS

- 25/66/03/000/000/010 0 ED
Emergency Locator Transmitter - Battery
MP/N modified
Title modified
Description modified
- 25/66/03/000/000/020 1 Y // 0 ED
Emergency Locator Transmitter - Interface unit - Battery
Limit modified
Title modified
Description modified
- 25/66/03/000/000/025 10 Y
Emergency locator transmitter - Interface unit
Limit modified
MP/N modified
- 25/66/03/000/000/030 10 Y // 1 OPH
Emergency locator transmitter - Ejection unit
Limit modified
Description modified
- 25/66/03/000/000/050 10 Y // 1 OPH
Emergency locator transmitter
New task integrated

32-12 RETRACTABLE MAIN LANDING GEAR

AS 332 L2
HIGHLIGHTS
2016.07.18 Page 1
 MSM

- 32/12/00/000/000/000 20000 FH
Left trailing arm
task deleted and replaced bye 32/12/00/510/000/100
No technical change
- 32/12/00/000/000/010 20000 FH
Right trailing arm
task deleted and replaced bye 32/12/00/510/000/200
No technical change

3.3 Section 05.20.00

21-50 OPT - AIR CONDITIONING SYSTEM

- 21/50/02/000/000/060 1Y
SECAN HP air conditioning system
New task integrated
- 21/50/02/520/000/100 9000 FH
SECAN HP 10 kVA air conditioning unit - Fan
New task integrated
- 21/50/02/520/000/200 9000 FH
SECAN HP 10 kVA air conditioning unit - Fan
New task integrated

25-62 OPT - EMERGENCY FLOATATION GEAR

- 25/62/01/000/000/270 15 Y
Collective pitch lever - Percussion control pushbutton
Maintenance code deleted
Description modified

25-64 OPT - HOIST

- 25/64/02/000/000/100 15 Y
Collective pitch lever - Percussion control pushbutton
Maintenance code deleted
Description modified

25-68 OPT - ROPING INSTALLATION

- 25/68/00/000/000/010 750 FH // 2 Y
Hoist arm assembly - Parts fixed and removable
MP/N(s) added

26-11 ENGINE FIRE DETECTION SYSTEM

- 26/11/00/000/000/010 750 FH
Engine fire detection system
Documentation modified
29-00 HYDRAULIC POWER
- 29/00/00/520/617/100 8Y
Hydraulic system - Hose
New task integrated

53-76 TAIL BOOM FAIRING

- 53/76/00/520/211/100 100 FH
IGB fairing – Fixation bracket
New task integrated

AS 332 L2
HIGHLIGHTS
2016.07.18 Page 2
 MSM

56-20 CABIN WINDOWS

- 56/20/00/000/000/010 75 FH
Window and emergency exit – Quick-release tape
MOD Applicability modified
Title modified
Description modified
- 56/20/00/520/211/200 75 FH // 1 Y
Window and emergency exit – Quick-release handle
New task integrated

63-24 MGB LUBRICATION SYSTEM

- 63/24/03/000/000/010 100 FH
Oil cooler
Documentation added
Description modified

63-25 ROTOR BRAKE

- 63/25/00/000/000/030 750 FH
Rotor brake - Pads's jaws and disk
Description modified

65-11 REAR TRANSMISSION

- 65/11/00/000/000/160 50 FH
Drive shaft bearing mount - Bearing
Limit modified
67-00 ROTORS FLIGHT CONTROL
- 67/00/00/520/221/100 750 FH // 1 Y
Rotor flight control linkage
New task integrated
- 67/00/00/520/221/200 750 FH // 2 Y
Rotor flight control linkage
New task integrated

3.4 Section 05.50.00

63–25 ROTOR BRAKE

- 63/25/00/000/000/010
Rotor brake
Documentation modified

End of the Document Unit

AS 332 L2
HIGHLIGHTS
2016.07.18 Page 3
 MSM

TECHNICAL PUBLICATIONS

1 THE DOCUMENTATION
The technical documentation intended for operators is mainly broken down into five groups:

2 OPERATION DOCUMENTS

- The Master Servicing Manual (MSM) is intended particularly for those responsible for helicopter
maintenance. It specifies the maintenance limits.
- The Airworthiness Limitations Section (ALS) is intended for those responsible for helicopter
maintenance. It defines the mandatory limits and checks.
- The flight manual (PMV) is intended for flight crews. It specifies the limits, standard and emergency
procedures and helicopter performance data.
- The Master Minimum Equipment List (MMEL) specifies the minimum list of equipment necessary
for flight.

3 MAINTENANCE DOCUMENTS

- The aircraft maintenance manual (MMA) specifies the maintenance procedures necessary to
service the helicopter.
- The System Description Section (SDS) comprises part 1 of the MMA and explains how the
systems operate.
- The structural repair manual (MRS) is used to identify and protect materials, and to repair or
replace structural components, mechanical components and blades.
- The standard practices manual (MTC) combines all the general know-how and knowledge
necessary regarding implementation, maintenance, checks, standard repairs and technical and
safety instructions and storage conditions.
- The wiring diagram manual (MCS) combines all the helicopter wiring diagrams.
- The Special Index Modification (SIM) lists the applicable modifications and their corresponding
SBs where applicable.

4 IDENTIFICATION DOCUMENTS

- The Illustrated Parts Catalog (IPC) contains all the spare parts necessary to ensure continued
serviceability of the helicopter.
- The illustrated tools catalog (ICO) contains all the tools necessary to ensure continued
serviceability of the helicopter.

5 SPECIAL DOCUMENTS

- Service Bulletins (SB), Alert Service Bulletins (ASB) and Emergency Alert Service Bulletins
(EASB) are intended to inform the operators of instructions introduced following new events
(incidents, modifications, etc.). These documents supplement the helicopter documents and are
incorporated in the latter by updates if necessary.
- Information Notices (IN) and Safety Information Notices (SIN) are documents issued for
information. Their purpose is to remind operators of existing maintenance procedures, or to inform
them of changes validated by Airbus Helicopters and undergoing introduction.

6 VENDOR’S DOCUMENTS

- This documentation comprises the following vendor’s manuals: Service Bulletins Vendors (SBV),
Engine Maintenance Manual (EMM) and Component Maintenance Manual (CMM).

AS 332 L2
TECHNICAL PUBLICATIONS
2014.06.12 Page 1
 MSM

End of the Document Unit

AS 332 L2
TECHNICAL PUBLICATIONS
2014.06.12 Page 2
 MSM

GLOSSARY

(-): Not indicated

&: And
//: Or
§: Paragraph
A: Basic inspection with a cAlendar limit
ALF: Check After the Last Flight of the day
ALL MP/N: ALL Manufacturer Part Numbers
ALS: Airworthiness Limitations Section
ASB: Alert Service Bulletin
BFF: Check Before the First Flight of the day
CFE: Customer Furnished Equipment
CLN: CLeaNing
CM: Condition Monitoring
CMM: Component Maintenance Manual
CSS: Chapter / Section / Subject
D: Day
DI: Detailed Inspection
DRN: DRaiNing
DS: DiScard
DU: Document Unit
EASA: European Aviation Safety Agency
ED: Expiry Date
EMM: Engine Maintenance Manual
EXC: EXCept
FAA: Federal Aviation Administration
FC: Functional Check
FH: Flight Hour
FM: Log card
FT: Functional Test
GR: Ground Run
GVI: General VIsual check (visual inspection with access equipment and standard tools)
HC: Hoist Cycle
HT: Hard Time maintenance
IGB: Intermediate Gear Box
JAA: Joint Aviation Authorities
LOEDU: List Of Effective Document Units
LC: Landing Cycle
LUB: LUBrication
M: Month
MC: Maintenance Code
MGB: Main Gear Box

AS 332 L2
GLOSSARY
2013.12.12 Page 1
 MSM

MMA: Aircraft maintenance manual

MMEL: Master Minimum Equipment List
MP/N: Manufacturer Part Number
MRH: Main Rotor Hub
MRS Structural repair manual
MSM: Master Servicing Manual
MTC: Standard practices manual
NPT: New Proof Test
OC: On Condition
OPC: OPerating Cycle
OPH: OPerating Hour
OPT: OPTion
OTL: Operating Time Limit
PMV: Flight manual
P/N: Part Number
PO: Perform Once
POST MOD: After modification
PRE MOD: Before modification
RC: Roping Cycle
RIG: RiggInG
RS: ReStoration
RTQ: Readjustment of the TorQue loading
S: Additional inspection
SB: Service Bulletin
SC: Sling Cycle
SDI: Special Detailed Inspection
SLL: Service Life Limit
S/N: Serial Number
SVC: SerViCing
T: Basic Technical inspection with an hour-based time limit
TA: Turn Around check
TBO: Time Between Overhaul
TC: Torque Cycle
TCK: Torque ChecK
TGB: Tail Gear Box
TL: Type of Limit
TRH: Tail Rotor Hub
TSI: Time Since Installation
TSM: Time Since Manufacture
VC: Visual Check
WC: Work Card
WGH: WeiGHing
Y: Year

End of the Document Unit

AS 332 L2
GLOSSARY
2013.12.12 Page 2
 MSM

STRUCTURE OF THE MSM

1 GENERAL STRUCTURE OF THE MSM

The Master Servicing Manual (MSM) is broken down into two parts.
The first part comprises general information which explains how the MSM operates and how it must be used.
The second part which defines the scheduled maintenance comprises the following sections:

- 05-10-00 Intervals and Operating Time limits

This section lists the components subject to an Operating Time limit (OTL) or to a limited Time
Between Overhauls (TBO) together with their corresponding intervals.
This section also lists the assemblies subject to On-Condition maintenance (OC).

- 05-20-00 Maintenance Operations

This section lists the maintenance operations and their intervals in all the aircraft operating
conditions.

- 05-50-00 Special Monitoring after event

- 05-52-00 Special Monitoring after repair
These sections group all the maintenance actions that are to be taken subsequent to certain
incidents, events or repairs.
These sections specify the maintenance operations to be performed on the helicopter, periodically or a
limited number of times, regardless of the operating conditions.

2 BREAKDOWN OF THE MSM

The various parts of the MSM are presented in the form of Document Units (DUs).

2.1 Identification of the DUs

Each DU is unique and is identified by the following:

- The title of the manual at the top right hand side of the page,
- The effectivity (helicopter type and version) marked at the bottom left hand side of the page,
- The date code of the DU at the bottom left hand side of the page below the effectivity
(format: year. month. day),
- The number of the section or title of the DU at the bottom right hand side of the page,
- The page number at the bottom right hand side of the page.
- The ATA number at the bottom of the page only for the sections 05-10-00, 05-20-00,
05-50-00 and 05-52-00.
The end of each Document Unit is identified by " End of the Document Unit" on the last page.

2.2 Task codes

The sections 05-10-00, 05-20-00, 05-50-00 and 05-52-00 comprise maintenance tasks. These tasks
are identified by a unique code specific to Airbus Helicopters, comprising a group of 15 characters.
Example:

AS 332 L2
STRUCTURE OF THE MSM
2014.06.12 Page 1
 MSM

The first four digits (22/31//00/000/000/000) correspond to the ATA chapter/section breakdown.
The fifth and sixth digit (22/31/00/000/000/000) are used to subdivide an ATA chapter/section
comprising several subjects into individual subjects.
The seventh to fifteenth digit (22/31/00/000/000/000) according to the section of the MSM are used
to identify the tasks per ATA chapter/section/subject.

2.3 List Of Effective Document Units (LOEDU)

The LOEDU specifies the following information, for each DU, in a table:

- The Document Unit (DU): this column specifies the number of the section, ATA number or
the title of the DU (example: 05-20-00 ATA 36).
- The type: this column is coded with the letter "R" if the DU is revised, "D" if the DU is deleted,
"N" if the DU is new, or has no code for DUs which are unchanged.
- The date: this column indicates the DU date code.

3 CLASSIFICATION OF INFORMATION
The DUs in sections 05-10-00, 05-20-00, 05-50-00 and 05-52-00 are classed in increasing order according
to ATA 100 numbering.
The tasks comprising the DUs in section 05-20-00 are arranged in the following order: perform once tasks
at the start of the DU, followed by periodic tasks.
End of the Document Unit

AS 332 L2
STRUCTURE OF THE MSM
2014.06.12 Page 2
 MSM

UPDATE OF THE MSM

1 REVISION OF THE MSM

The MSM is revised approximately every 6 months.
The MSM cover page bears the issue date code (first issue), the current revision number taken in
chronological order followed by the revision date code (example: Issue date: 2012.02.20, Revision 001:
2012.06.20, the last applicable revision is revision 001 with a date code of 2012.06.20).
The date code marked on the new or revised DUs corresponds to the revision date code marked on the
cover page.

2 UPDATE OF THE MSM

2.1 Update procedure
The user is responsible for updating his documentation each time he receives a revision or a new
issue from the manufacturer. The MSM is updated using the new LOEDU which specifies which DU
must be inserted (new DU), replaced (revised DU) or removed (deleted DU). A deleted DU is issued
with the wording "DU TO BE DELETED FROM THE MANUAL" in the revision concerned.
Once the MSM has been updated, the date code of each DU indicated at the bottom left hand side of
each page must correspond with the LOEDU.
The beginning of the MSM includes a "HIGHLIGHTS OF REVISION" page which explicitly
summarizes the modifications made to each revision or new issue.
NOTE

After updating, the "RECORD OF REVISIONS" page at the

beginning of the MSM must be completed (date, name and
signature).

2.2 Identification of the modifications

Modifications are identified by a revision mark in the form of a vertical line in the right hand margin of
the page.
Revision marks are not used in the following DUs:

- LOEDU,
- Table of contents,
- Highlights of the revision.

3 CUSTOMER COMPLEMENT (CC): ISSUED ON A GREEN BACKGROUND

The Customer Complement adds Document Units to the Basic Manual, which partially or totally modify the
information it contains.
THE INFORMATION GIVEN ON THESE DOCUMENT UNITS TAKES PRECEDENCE OVER THE
INFORMATION GIVEN IN THE BASIC MANUAL.
This information is specific to the customer and helicopter(s) identified at the bottom of the pages.
The Customer Complement Document Units can be revised by reissue of the complete typesetting for a given
customer. No Basic Manual Revision Document Unit is cancelled by a Customer Complement Revision.

AS 332 L2
UPDATE OF THE MSM
2015.01.15 Page 1
 MSM

A supplement to the “LIST OF EFFECTIVE DOCUMENT UNITS” lists the Customer Complement Document
Units. The Basic Manual Revisions (on a white background) are completely separate from the Customer
Complement Revisions (issued on a green background).

4 EFFECTIVITY
The operator must check the effectivity of the MSM used (correctly updated) for the helicopter concerned.
The effectivity (helicopter type and version) is indicated on the cover page and is repeated at the bottom of
each page comprising the MSM DUs.
End of the Document Unit

AS 332 L2
UPDATE OF THE MSM
2015.01.15 Page 2
 MSM

BREAKDOWN OF THE MSM

1 PURPOSE OF THE MSM

The Master Servicing Manual (MSM) is drawn up by the helicopter manufacturer and specifies all the
maintenance operations to be performed by the operator.
It specifies all the maintenance operations and limits recommended by the helicopter manufacturer,
to ensure continued airworthiness, operational availability and performance of the helicopter (*), in all
its varied operating missions.
For the maintenance operations and limits assigned to the APU and the engine components, refer to the
engine manufacturer’s documentation.
(*) Helicopter (type/version) defined by Airbus Helicopters.

2 CHANGES TO THE MSM

The MSM is modified by the manufacturer according to changes in helicopter definition and operational
feedback.

3 HELICOPTER MAINTENANCE
Helicopter maintenance consists in applying all the operations specified in the various sections of the MSM.
It must be performed by personnel with the required qualifications.
Maintenance includes the monitoring, servicing and reconditioning of a helicopter’s components, as
specified in the various manuals, taking into account the information that the manufacturer makes known to
the operator via Alert Service Bulletins, Service Bulletins, Safety Information Notice, Information Notice etc.

4 TYPES OF MAINTENANCE
Preventive Maintenance:
Preventive maintenance consists of all the scheduled, and generally repetitive, operations to check and
maintain a given operating condition.
Corrective Maintenance:
Corrective maintenance consists of all the operations that are performed after detection of a fault or failure in
order to re-establish the initial operating condition.
Remedial Maintenance:
Remedial maintenance consists of all the operations initiated to permanently correct a failure and to partially
or wholly eliminate the preventive and corrective maintenance.

5 DEFINITION OF THE MAINTENANCE MODES

There are three main maintenance modes:

- Hard time maintenance.

- On-condition maintenance.
- Condition monitoring maintenance.
The modes (defined below) differ mainly in how the replacement (or repair) of a component with a
serviceable component is initiated. With the first two modes, the aim is to replace (or repair) the component
before it fails, whereas in the third mode, to replace it after it fails.

AS 332 L2
BREAKDOWN OF THE MSM
2014.06.12 Page 1
 MSM

5.1 Hard time maintenance

A component subject to hard time maintenance must be removed at the latest when it reaches its
limit.
There are three types of hard time maintenance limits:

- Service Life Limit (SLL)

The SLL is an airworthiness limitation.
Components which are essential for operating safety which are subject to undetectable
damage due to the loads they withstand, are covered by a Service Life Limit. These
components must be removed from service when the specified limit is reached.
These limits are listed in chapter 04.

- Operating Time Limit (OTL)

Components whose possible failure would have lesser consequences on flight safety
than components with a Service Life Limit, are assigned an Operating Time Limit. These
components must be removed from service when the specified limit is reached.

- Time Between Overhauls (TBO)

A TBO is assigned to a complete assembly. The interval corresponds to the operating time
permitted before an overhaul is performed in a specialized workshop. The overhaul allows
the assembly to be returned to service for a new period.
The interval corresponds to a period during which any increase in damage cannot be
detected by routine maintenance (example: internal corrosion, fretting leading to the
loosening of bolted assemblies, etc.).

NOTE

The time limits assigned to components guarantee flight

safety with regard to the flight load fatigue alteration of
components with no external deterioration. These time lim-
its are not a commercial guarantee because a component
may be removed due to wear, fretting corrosion or scoring,
etc., before the expiry of the time limits.

The only warranty applicable to the helicopter and any

component is the warranty included in the Sales Contract
for the helicopter and the components.

5.2 On-Condition maintenance

A component subject to On-Condition maintenance must be inspected periodically to confirm:

- that there is no damage,

- or that the damage found is within the removal or maintenance criteria specified in the
documentation.
In both cases, the component is kept in service until the next inspection. The component must be
removed from service when it reaches the criterion for removal, or made serviceable again as
per the instructions given in the documentation.

AS 332 L2
BREAKDOWN OF THE MSM
2014.06.12 Page 2
 MSM

Consequently, the removal of such items cannot be programmed. It intervenes depending on

the result of the inspections.
The visual inspection is aimed at the overall external appearance of the component (no distortion,
failure, cracks, scratches, signs of heating or wear, etc.), which would modify its original condition.
STANDING INSTRUCTIONS RELATIVE TO CONDITION: Surface deterioration and deterioration to
protection and paint on all helicopter components must be examined and treated without delay in
accordance with the applicable instructions (criteria, then reworking).

5.3 Condition monitoring maintenance

A component is subject to condition monitoring only after its failure (which has no impact on flight
safety) has been detected. Such failures are detected during maintenance or in service. These
components are not listed in the MSM.
NOTE

Some components can be subject to several maintenance

modes, for example, an OTL during which a condition
check (OC) is to be performed.

6 EFFECTIVITY - RESPONSIBILITY
The limits assigned to the component part numbers listed in the MSM are applicable to material:

- acquired directly from Airbus Helicopters or through the Airbus Helicopters subsidiaries or
distribution network,
- purchased from the equipment vendors listed in our spare part catalogs, either directly or through
their own distribution network.
In all cases, the manufacturing source is specified in the "airworthiness document" (JAA form one, EASA
Form One or equivalent).
Airbus Helicopters will not carry out repairs on components which were procured other than through the
Airbus Helicopters distribution network.

IT IS PROHIBITED TO REUSE PARTS, EQUIPMENT

OR ASSEMBLIES, COMING FROM A HELICOPTER
WHICH HAS INVOLVED IN AN ACCIDENT, WITHOUT
FORMAL TECHNICAL APPROVAL FROM THE AIRBUS
HELICOPTERS CUSTOMER TECHNICAL SUPPORT
DEPARTMENT.

REMINDER: THE AIR ACCIDENT INVESTIGATION

BOARD OF THE COUNTRY CONCERNED IS RESPON-
SIBLE FOR CLASSING AN EVENT AS AN ACCIDENT.

7 MAINTENANCE INTERVAL
7.1 Daily checks
The purpose of the daily checks is to ensure the serviceability of the aircraft for the flights of the day.
The daily checks are broken down as follows:

- Check before the first flight of the day (BFF)

AS 332 L2
BREAKDOWN OF THE MSM
2014.06.12 Page 3
 MSM

The purpose of this check is to confirm the airworthiness of the aircraft once it has been
positioned on the takeoff area after elimination of possible faults that have been reported by
the pilot in the aircraft log book and that are liable to affect the safety level of the aircraft.
The interval between this check and the first of the day should be as short as possible.

- Turn-around check (TA)

The turn-around check is intended to confirm the short-term serviceability of the aircraft
further to the preceding flight (checking the levels and mission related particular features
etc.).

- The check after the last flight of the day (ALF)

This check is to be carried out after the last flight of the day, without exceeding 15 flight
hours. It is designed to confirm the serviceability of the aircraft for the flights scheduled for
the next day of flight. It consists in performing a visual or tactile examination of certain
aircraft components.

Acceptance of an aircraft by the pilot and/or when a modification is embodied on the aircraft:
The mechanic or the person in charge of the maintenance engineering must inform the pilot on a
routine basis of:

- any modification to the definition that has been embodied on the aircraft,
- any possible change in the limit interval of the component modified.
7.1.1 Cold weather and very cold weather routine check
According to the lowest temperatures reached, a supplementary program is defined in
the aircraft maintenance manual (MMA).
7.1.2 Check of Optional Installations
The daily checks applicable to optional systems are also specified in the Flight Manual. The
detailed program is also given in the aircraft maintenance manual (MMA) Task 05.21.01.211.

7.2 Additional inspection (S)

The additional inspection must be performed

- every 75 FH.
The inspection focuses on the condition of the components with short inspection intervals (less
than the basic inspection).

7.3 Basic inspection (T or A)

The basic inspection comprises checks associated with:

- operation, to be performed every 750 FH (called T inspection) or every 24 months (called

A inspection).
The basic inspection includes:

- condition monitoring of the components and systems by functional tests,

- inspection of the condition of the components which have a direct impact on the
airworthiness of the helicopter.

AS 332 L2
BREAKDOWN OF THE MSM
2014.06.12 Page 4
 MSM

It is aimed at checking the overall condition of the helicopter through detailed visual checks of
the systems and equipment (no distortion, failure, cracks, scratches, corrosion, signs of heating,
wear, impacts, etc.).
The basic inspection is supplemented:

- every 2nd time by a “1500 FH or 48 months” type inspection supplement,

- every 3rd time by a “2250 FH or 72 months” type inspection supplement,
- every 4th time by a “3000 FH, 1500 FH or 96 months, 48 months” type inspection
supplement.
NOTE

At each inspection, make sure:

- that no additional action has recently been specified by

the manufacturer by way of an Alert Service Bulletin or Ser-
vice Bulletin, etc.,

- that no interval or limit has been modified by way of an

Alert Service Bulletin or Service Bulletin, etc.,

- that no interval or limit specified by the MSM has been

reached.

The limits (TBO, OTL, SLL) specified in MSM section

05-10-00 and ALS section 04-10-00 must also be taken
into account where necessary in order to replace compo-
nents which must be replaced before the next inspection.

7.4 Major Inspection

The Major Inspection interval is 15 Y.
RECOMMENDATIONS RELATING TO FLIGHT RATES.
For aircraft with comparatively low flight rates, at 15 Y, it is advisable to perform in addition to the
operations of the major inspection the contents of the basic inspection and its multiples, as well
as all the operations outside the inspection cycle, even if the time limits do not coincide exactly,
in order to start a complete cycle as described in this section.
For aircraft with high flight rates, for maintenance operations with “distant” time limits and double
release such as 9000 FH // 15 Y (or 4500 FH // 6 Y) for example, the interval between two checks
must be observed.
So the customer may not carry out an operation at the 15-year major inspection, but he must
observe the interval which in specified in the Master Servicing Manual (MSM).

8 CFE (CUSTOMER FURNISHED EQUIPMENT) MAINTENANCE

For the maintenance of mission-specific equipments (CFE), refer to the supplier documentation in force,
provided during delivery of these materials.
End of the Document Unit

AS 332 L2
BREAKDOWN OF THE MSM
2014.06.12 Page 5
 MSM

USE OF THE MSM

1 ADAPTATION OF THE MSM

The Master Servicing Manual (MSM) presents the limits for the maintenance operations recommended by
the manufacturer.
It can be used as is or it can be adapted by each operator according to his operational needs on the condition
he has the approval of his aviation authorities and that he complies with the interval for each maintenance
operation.

2 INFORMATION FEEDBACK FROM THE OPERATOR TO THE MANUFACTURER

The operator must inform his local aviation authorities and the aircraft manufacturer of any significant failure
or malfunction discovered in operation or in maintenance, particularly when the component in question
is maintained by condition monitoring.
This feedback can be essential for maintaining airworthiness (refer to chapter 04 - DU: USE OF THE ALS
- §: "Occurrence reporting").
This is also applicable in case of an accident.

3 IN-SERVICE MONITORING
3.1 Airframe monitoring
The in-service monitoring of the airframe must be recorded in the helicopter logbook.

3.2 Monitoring of components

All the components listed in section 05-10-00 of the MSM are to be monitored in service, unless "not
to be monitored in service" is specifically mentioned in the task.
The in-service monitoring of components consists in recording the date of installation, the number of
flight hours and/or the calendar time and/or the cycles logged on the equipment log card (FM).
If the component does not have a log card (component monitored via the log card of its higher
assembly or component without a serial number, etc.), before installation, the operator must organize
his documentation in order to comply with the inspection intervals and limits relating to this component
(refer to standard practices manual Work Card 20.08.05.101).
These records must be kept if the component is transferred from one helicopter to another.
All the documentation must be organized to enable recording of all the parameters used to comply
with the limits.

3.3 Specific case of elastomer hoses

The operator must calculate the aging of elastomer hoses for rejection in accordance with the
instructions of standard practices manual (MTC) Work Card 20.09.01.902.
The operator must create a follow-up document (log card for example) in order to comply with the
operating time limits.

4 COMPONENT PART NUMBERS

4.1 Definition

- Manufacturer Part Number (MP/N): This is the identification number of the component marked
on the identification plate or directly on the component.

AS 332 L2
USE OF THE MSM
2015.10.29 Page 1
 MSM

- Airbus Helicopters Part Number (P/N):This is the Airbus Helicopters part number which
is associated with the manufacturer's part number (MP/N) for components which are not
manufactured by Airbus Helicopters.
The part numbers of the components (parts or assemblies) which are given in the MSM are the
manufacturer's part numbers (MP/N).
In the case of components which are not manufactured by Airbus Helicopters, the MP/N is followed
by the associated P/N (in brackets).
Example:

In some cases the P/N is not specified, in this case it is replaced by a hyphen.

4.2 Part Number followed by a suffix

In some cases, the MP/N can be assigned a suffix (example: MP/N 332A32-5001-00M), used for
spares to indicate the installation of an optional component or a specific configuration.
These MP/Ns with a suffix generally do not appear in the MSM.
The Limit applicable to an MP/N with a suffix is identical to that of the same MP/N without a suffix.
Example: the limit given for assembly MP/N 332A32-5001-00M is valid for assembly MP/N
332A32-5001-00 and assembly MP/N 332A32-5001-00M.

4.3 Applicability of the limits

The limit(s) specified for the first MP/N are valid for all the other MP/Ns listed in the same task.
Example:

4.4 Changes to Part Numbers

Unless otherwise stated, the time limits and inspections apply to the component whose part number
is listed in the MSM and to its future changes, including those not already indicated in this section.
In this case, contact the Airbus Helicopters technical support department to confirm the installation
effectivity of the dash number.

5 EXPRESSION OF THE LIMITS

A component or a maintenance operation can be subject to one or more limits, expressed in:

- flight hours,
- calendar time,
- cycles,
- number of operations (for certain components).

AS 332 L2
USE OF THE MSM
2015.10.29 Page 2
 MSM

5.1 Flight Hours

- Flight Hours (FH), are counted from takeoff to landing.

5.2 Calendar time

Calendar time can be expressed:

- in Years (Y),
- in Months (M),
- in Days (D),
- Before the First Flight of the day (BFF),
- Turn Around check (TA),
- After the Last Flight of the day (ALF),
- with the date marked on the equipment label (ED: Expiry Date).
5.2.1 Airframe initial aging date
The helicopter airframe initial aging date to be taken into account is the date marked on
the helicopter identification plate.
5.2.2 Initial aging date for components

- The initial aging date for a component and a dynamic component to be taken into
account is generally the date of first installation or first destorage, to be recorded on the
equipment log card. In this case, there are no other specifications in the MSM tasks.
The storage time before installation is therefore not to be taken into account on the
condition that storage was in accordance with the applicable documentation, except
for the following specific cases.

- For some components, the aging date to be taken into account is the date of
manufacture marked on the Log Card (FM). In this case, TSM (Time Since
Manufacture) is specified in each task concerned in the MSM.
Specific cases:
Components or dynamic components are sometimes subject to a limit since installation and
a limit since manufacture. In this case, both limits followed by TSI (Time Since Installation)
and TSM (Time Since Manufacture) are indicated, as per the following example:

AS 332 L2
USE OF THE MSM
2015.10.29 Page 3
 MSM

NOTE

If there is no log card, when the component arrives in the

stores, it is advisable to create a "Follow-up Sheet" and to
fill out the helicopter logbook when the component is in-
stalled. When the component is installed on the helicopter,
the applicable date is the date of manufacture marked on
the component's identification plate.
NOTE

Dynamic components, which have been subject to work in

a specialized workshop or long-term storage in accordance
with the applicable instructions during this period, may be
subject to an extension to this calendar time limit.

In this case the operator must make a request with the Air-
bus Helicopters Technical Support Department and obtain
approval from the manufacturer and the Airworthiness Au-
thorities.

5.3 Cycles
According to the component, the cycles can be expressed either as:

- Takeoff/landing cycle: LC (Landing Cycle)

1 LC = 1 takeoff/landing.

- Sling cycle: SC (Sling Cycle)

1 SC = 1 release with load on ground and 3 SC = 1 release in flight (load not on the ground).

- Roping cycle: RC (Roping Cycle)

1 RC = 1 rope release or 4 commando drops without rope release.

- Hoisting cycle: HC (Hoist Cycle)

1 HC =
- In flight, one downward movement + one upward movement, whatever the length of cable and
load involved.
- On the ground, one downward movement of 5 meters or more and one equivalent upward
movement, whatever the load involved.

- Use cycle: OPC (OPerating Cycles)

The definition is specified in each concerned task.

- Use hour: OPH (OPerating Hours)

The definition is specified in each concerned task.

5.4 Provisional limitations

The limits for which additional fatigue tests indicate the possibility of an extension, are identified by
code “P” (Provisional). This code (P) follows the value of the limit in the tasks concerned.

AS 332 L2
USE OF THE MSM
2015.10.29 Page 4
 MSM

The operator should therefore store the component in question after removal, pending a service life
extension.

5.5 Periodic and Perform Once limits

The limits specified in section 05-20-00 of the MSM must be complied with:

- Periodically: the maintenance operation must be performed at the latest when the indicated
limit is reached.
NOTE

For operational reasons, the maintenance operation can

be performed before the limit is reached, however, the max-
imum interval between two maintenance operations must
be complied with.

or

- Once only: the maintenance operation must be performed once only, when the indicated limit is
reached.
It must not be performed before the limit is reached.
These maintenance operations are identified by a dotted line around the task and by code
PO (Perform Once) in front of the limit value.
These operations can be performed either:
- After installation of a component removed from the same helicopter,
- After the introduction to service of a new, overhauled or repaired component,
- After installation of a component originating from another helicopter,
- Each time after the component is installed.
The start of the maintenance operation is specified in each task concerned.
Example:

5.6 Performance interval

Some components and maintenance operations are assigned several performance limits separated
by the "//" or “&”sign.
In the case of limits separated by the "//" sign, the maintenance operation must be performed
when the first limit is reached.
The next limit at which the component is to be rejected or the maintenance operation is to be
performed will once again be the first limit reached.

AS 332 L2
USE OF THE MSM
2015.10.29 Page 5
 MSM

In the case of limits separated by the "&" sign, the maintenance operation must be performed at
each limit indicated.
Example 1:

Section 05-10-00
A servocontrol performs 800 FH over a period of 20 Y (TSM). The first limit reached by the servocontrol
is therefore 20 Y; it must be removed for overhaul (TBO) and returned to service for another period.
After overhaul, the servocontrol is installed on a helicopter and then performs 1000 FH in 10 Y.The
first limit reached by the servocontrol is therefore 1000 FH. It must therefore be removed for another
overhaul (TBO).
Example 2:

Section 05-20-00
The maintenance operation must be performed once at 5 Y and once at 8 Y after manufacture.

5.7 Specific and severe atmospheric operating conditions

Certain specific and severe climatic conditions are considered as specific operating conditions. This
concerns the use of helicopters in the following conditions:

- Tropical and damp atmosphere:

Combination of high ambient temperatures and humidity levels (from +28°C (+82.4°F) and
75% relative humidity).

- Salt-laden atmosphere:
. Ship-based or,
. Based for more than 50% of its time less than 1 km from the coast or,
. Spending more than 50% of its time in offshore flight at low altitude (below 1,000 feet).
Helicopters based on a ship or based less than 1 km inland for more than 50% of the time, or
Flying offshore at low altitude (below 1,000 feet) for more than 50% of the time. This monitoring
is identified in the maintenance tasks by the NOTE "Ship-based helicopter".

- Sand- and/or dust-laden atmosphere:

AS 332 L2
USE OF THE MSM
2015.10.29 Page 6
 MSM

Sand-laden wind and/or landing on sandy ground.

- Cold weather:
Helicopters operating in the following conditions: in actual or forecast snow or ice conditions at
outside air temperatures above - 30˚C (- 22°F).

- Very cold weather:

Temperatures observed or forecast from -30°C to -45°C (-22°F to -49°F).

The scheduled maintenance relating to these operating conditions is covered with all the MSM tasks.
These operating conditions require not only the operations specified in the MSM and standard
maintenance operations, but also the preventive measures recommended in MMA task 05.55.00.611.
Since the interval is not specified, the operator must reapply the measures according to his own
experience in the corresponding conditions.

5.8 Maximum limit value

The maximum limit value represents the limit not to be exceeded. No tolerance is permitted on the
maximum limit value.
The maximum limit value equals to a limit value + margin value.
5.8.1 Definition of the margin
To introduce "flexibility" into maintenance planning in order to compensate for unpredictable
situations (e.g. unforeseeable increase in the helicopter utilization rate), Airbus Helicopters
defines a value, called "margin", to be added to a limit value.
This margin, added to the limit value to which it is applicable, results in the maximum limit
value (limit value + margin value) to be taken into account for two consecutive inspections.
5.8.2 Application of the margin
The margin can be used repetitively for each limit value interval (refer to “example of how
the margin is used”).
However, to maintain certain "flexibility" in maintenance planning, Airbus Helicopters
recommends to plan the maintenance operation using the limit value without taking the
margin into account.
5.8.3 Specification of the margin
The margin value and its units are specified as shown in the following example.
Example:

No units are specified when the margin equals zero.

AS 332 L2
USE OF THE MSM
2015.10.29 Page 7
 MSM

5.8.4 Example of how the margin is used

X is the limit value for performing the maintenance operation and Y is the margin value
added to the limit value.
After using the first margin value (partially or completely), the next maintenance operation
is to be performed again within the X+Y interval, that is to say before the next maximum
limit value.

6 AUTHORIZATION TO TRANSFER A COMPONENT (PART OR ASSEMBLY) FROM ONE

AIRCRAFT VERSION TO ANOTHER AIRCRAFT VERSION
6.1 Versions on which the transfer of components is applicable
The versions on which the transfer of components is applicable are listed in the table below:

Type of aircraft Civil versions Military versions

AS 332 C, C1, L, L1, L2 B, B1, F1, M, M1
AS 532 AC, AL, SC, UE, UL, A2, U2
EC 225 LP
EC 725 AP

6.2 Components NOT subject to In-Service Monitoring (Condition Monitoring)

Transfer of components not subject to in-service monitoring is authorized between all versions
specified in the table above after compliance with MTC Work Card 20.08.05.104.

6.3 Components subject to In-Service Monitoring

6.3.1 Components subject to a Service Life Limit (SLL)

The transfer rules are defined in chapter 04 (ALS).
6.3.2 Components subject to Time Between Overhauls (TBO), Operating Time Limit (OTL),
On-Condition maintenance (OC)

6.3.2.1 Transfer Authorization

Transferring a component (part or assembly) in section 05-10-00, from an
aircraft version "x" to an aircraft version "y" is only authorized if the following
conditions are simultaneously met:

- the versions "x" and "y" are listed in the above table, transfer of
components from any other version or any other type of aircraft is
prohibited (example: SA 330 or MOX-specific components from a PUMA
version, version specific KUH [P] or GTV components),
- the part number of the component to be transferred is listed in both in
section 05-10-00 of version "x" and in section 05-10-00 of version "y",

AS 332 L2
USE OF THE MSM
2015.10.29 Page 8
 MSM

- no provisional limitation of the component to be transferred is assigned in

the MSM of version "x" or in the MSM of version "y",
- the time interval of the components subject to TBO and OTL are identical
both in the MSM of version “x” and in the MSM of version “y”,
- MTC Work Card 20.08.05.104 is applied during the transfer.

SPECIAL CASE

The following elements: ENGINE-TO-MGB COUPLING SHAFT, IGB ASSEMBLY, MAIN SERVOCONTROL, TAIL
SERVOCONTROL are only authorized to be transferred inside the following group of versions:
- 332 B, B1, F1, M, M1, 532 AC, AL, SC, UE, UL,
- 532 A2, U2,
- 332 C, C1, L, L1,
- 332 L2.

6.3.2.2 Application rules

The following rules are to be applied if the transfer is authorized:

- Components subject to TBO and OTL

Continue counting the flight hours and/or cycles and/or calendar time on
version "y".

- Components subject to “OC” maintenance

If the inspection intervals (flight hours and/or cycles and/or calendar time)
for the component are identical on version "x" and version "y", continue
counting the flight hours and/or cycles and/or calendar time on version "y".
If the inspection intervals (flight hours and/or cycles and/or calendar time)
of version "x" and version "y" are different, carry out these operations
during the transfer, then observe the interval of application specific to
version "y".

7 RECORDING
In all cases record the transfer information and calculation on the equipment log card of the component
concerned.
An individual log card must be drawn up if the component has been monitored via the log card of its higher
assembly.

8 MAINTENANCE CODES (MC)

To make it easier to perform the maintenance operations, each maintenance operation included in section
05-20 and 04-20 is identified by one or mode codes as listed below:

- LUBrication/SerViCing (LUB/SVC)
This includes work such as routine lubrication and servicing, filling/topping-up of oils, fluids, liquids
and checking of pressures.

- Visual Check (VC)

Visual inspection, without removal of the physical condition of certain components such as oil levels,
tire wear, accumulator pressure, etc.

AS 332 L2
USE OF THE MSM
2015.10.29 Page 9
 MSM

- General VIsual check (GVI)

A general visual check is a visual inspection, without removal, to detect and assess deterioration or
incorrect operation of a component or assembly. This check may require access equipment, ladders
or platforms, and inspection means, mirror, light or screwdriver. The doors and hatches are opened
or removed in order to access the components.

- Detailed Inspection (DI)

A detailed inspection is an inspection to detect and assess deterioration or incorrect operation of
a component or assembly. This inspection may require access equipment, ladders, platforms and
specific tools, and may require removal of the component or assembly. The doors and hatches are
open or removed.

- Special Detailed Inspection (SDI)

A special detailed inspection is an inspection to detect and assess deterioration or incorrect operation
of a component or assembly. This inspection may require a specific process such as dye penetrant
inspection, radiography, etc.

- Functional Test (FT)

A functional test/check is a test which is performed to determine whether one or more functions of
a system operate within stipulated limits. Normally this test is performed without the removal of
components and using a maintenance tool.

- CLeaNing (CLN)
To remove dirt and/or foreign bodies from a system or surface. Cleaning may require removal of the
component, such as for a filter for example.

- DiScard (DS)
A component is withdrawn from service at a specified limit. Discarding normally applies to parts such as
cartridges, containers, cylinders, batteries, etc.

- ReStoration (RS)
This work involves restoring a component to a specific standard. Restoration can vary from cleaning
or replacing detail parts to a complete overhaul.

- Readjustment of the TorQque loading (Retorque) (RTQ)

Readjustment is a maintenance procedure which consists in applying the tightening torque to an
assembly, without checking its value.

- Torque ChecK (TCK)

The aim of the torque check procedure is to check that the tightening torque of the assembly is not
below the specified minimum value.

- WeiGHing (WGH)
The aim is to remove the equipment in order to weigh it using scales, to check its integrity and to make
sure that there are no losses.

AS 332 L2
USE OF THE MSM
2015.10.29 Page 10
 MSM

- New Proof Test (NPT)

The aim is to perform a proof pressure test to check that there are no leaks.

- DRaiNing (DRN)
Draining/replenishing consists in replacing all the fluid, liquid, oil or fuel in a component.

- Ground Run (GR)

A ground run consists in checking certain parameters of a component or a function with the rotor
spinning or dynamically after operation.

- RiggInG (RIG)
Rigging consists in adjusting a control channel or a set of components which must have an operating
range in operation.

9 CONTENT OF A TASK
Example section 05-10-00

Example section 05-20-00 / 05-50-00

End of section

AS 332 L2
USE OF THE MSM
2015.10.29 Page 11
 MSM

- 1 - Task number (refer to the "STRUCTURE OF THE MSM" DU in § 2.2)

- 2 - Designation
- 3 - Equipment manufacturer's part number and the Airbus Helicopters management number (refer to § 4)
- 4 - Limit value(s) and unit(s) (refer to § 5.1 / 5.2 / 5.3)
- 5 - Margin value(s) and unit(s) (refer to § 5.8)
- 6 - Start of the limit (TSI, TSM) if necessary (refer to § 5.2.1 / 5.2.2)
- 7 - Comments if necessary
- 8 - //: or - &: and (refer to § 5.6)
- 9 - Reference documentation MMA, CMM (In the special case of MMA work cards referenced with
crosses “XX”, refer to the MMA for the complete number corresponding to the optional configuration
installed on the helicopter)
- 10 - Perform Once operation (refer to § 5.5)
- 11 - Maintenance modes: TBO, OTL, OC. (refer to the “BREAKDOWN OF THE MSM” DU in § 5.1/5.2)
End of the Document Unit

AS 332 L2
USE OF THE MSM
2015.10.29 Page 12
 MSM

OPTIONAL

1 COMPATIBILITY / INCOMPATIBILITY
A helicopter can be equipped with various optional items. There can be incompatibilities between certain
optional installations which can appear at two levels:
At operational level:

- In this case, incompatibilities between optional items are specified in the Flight Manual.
At installation on the helicopter:

- Either the helicopter can be equipped with two optional installations but not at the same time: there is
an installation incompatibility.
- Or the two installations can be installed together on the condition that one of them is modified: this is
called conditional compatibility.

The following table lists all the approved optional installations with their incompatibilities, conditional
compatibilities, or effects on operation, as specified in a Flight Manual Supplement.

2 TABLE OF APPROVED OPTIONAL INSTALLATIONS

Legend:
A: Fixed parts of both equipment items cannot be installed together.
B: Simultaneous installation of the removable parts totally or partially incompatible.
C: Can be installed together, but cannot be used at the same time.

ITEM. DESCRIPTION INSTALLATION

A B C

Fixed landing light in

1
multipurpose sponson

Enlarged baggage
2
compartment

3 Multipurpose sponson 4

4 Naval version sponson 3.34.35

5 Fuel flowmeter

AS 332 L2
OPTIONAL
2015.10.29 Page 1
 MSM

ITEM. DESCRIPTION INSTALLATION

A B C

6 "BENDIX" 1400 C radar

De-iced center windscreen

7
panel

20 to 23
600-liter fuel tank 18.19
8
54

Baggage compartment
9
fire/smoke detection

Center windscreen wiper

10
+ washer

Lightweight crashworthy
11
fuel tanks

"VICKERS" stanby electric

generator Operation or
12 18.19
starting the GSE heating
system

13 "ROSEMOUNT" ice detector 14

14 "LEIGH” ice detector 13

15 Floatation gear

17 75 m hoist - Fixed parts

AS 332 L2
OPTIONAL
2015.10.29 Page 2
 MSM

ITEM. DESCRIPTION INSTALLATION

A B C

8.12
18 75 m hoist - Removable parts 21 to 23
43.44.45

8.12
19 Second electric hoist 21 to 23
43.44.45

8
20 Drip tray 21 to 23
43.45

8.20.22
21 19-PAX furnishings 23.43.45 18.19
54

8.20.21
22 24 + 1 PAX furnishings 23.43.45 18.19
54

8.20.21
23 23 + 1 PAX furnishings 22.43.45 18.19
54

Green tinted cockpit upper

24
transparent panels

25 Green tinted cabin windows

Electrically bonded cabin

26
windows

AS 332 L2
OPTIONAL
2015.10.29 Page 3
 MSM

ITEM. DESCRIPTION INSTALLATION

A B C

2 bubble observation
27
windows

28 Air conditioning system

29 APU

30 6th standard fuel tank 31.45

31 6th crashworthy fuel tank 30.45

32 Cable cutter 46

33 2 life rafts

34 Sponson fuel tank 4.35

Baggage compartment in
35 4.34
the sponson

36 Multipurpose air intake

Main rotor blade erosion

37
protection

AS 332 L2
OPTIONAL
2015.10.29 Page 4
 MSM

ITEM. DESCRIPTION INSTALLATION

A B C

Tail rotor blade erosion

38
protection

39 Very cold weather kit

40 Skis

41 Pressure refueling system

3.4.42
with standard sponson

Pressure refueling system

42 with naval or multipurpose 41
sponson

20 to 23
43 Ferry fuel tank 18.19
45.54

44 3-tonne sling 45.55 18.19

20 to 23
45 4.5-tonne sling 18.19
30.31.44

46 Outside rear-view mirrors 32

47 SPECTROLAB searchlight

48 Public address system

49 Sea anchor

AS 332 L2
OPTIONAL
2015.10.29 Page 5
 MSM

ITEM. DESCRIPTION INSTALLATION

A B C

50 EUROHUMS

51 CHLIO FLIR

52 Folding main rotor blades

53 Fuel cross feed system

8.43
54 Air ambulance system
21 to 23

55 HOMING DF931 antenna 44

End of the Document Unit

AS 332 L2
OPTIONAL
2015.10.29 Page 6
 MSM

SB INCORPORATED

Airbus Helicopters is required to issue Service Bulletins (ASB/SB) subsequent to new events (incidents, etc).
The information contained in the SBs is incorporated in the MSM if, and only if:
The SB contains new periodic checks, or modifies the existing MSM limitations.

The table below specifies for each SB incorporated:

- the number of the SB and its revision number,

- the subject of the SB,
- the ATA chapter/section concerned,
- the date on which the SB is incorporated in the MSM.

SB N° Subject ATA AD number Incorporation date

05.00.46 Erosion of Main Blade Leading Edge Protection 62-10 - -

05.00.55 Check of the TGB for angular play 64-20 - 2002.07.31

05.00.57 Dynamic assemblies. Check intervals 60-00 - 2002.07.31

77.00.09 Check of "POWER LOSS" board 77-11 - 2002.07.31

05.00.50 Check of the side plug doors 52-12 - 2004.04.22

62.00.60 Main Rotor New MK2 main blade vibration 62-10 - 2004.12.14
damper assembly design

25.01.76R0 Replacement of Immersion Probe 64762-001-1 25-62 - 2007.05.11

(Emergency Floatation Gear, CVR CVFDR,
HEEL)

30.00.56R0 Heater Mat Wiring Modification 30-21 - 2007.05.11

05.00.71 TIME LIMITS - MAINTENANCE CHECKS -Life 25-66 - 2007.07.31

raft - Inflation cylinder

05.00.70 TIME LIMITS - MAINTENANCE CHECKS 62-23 - 2008.01.28

- Checking for axial play between the
non-rotating and rotating swash plates of the
Main Rotor Head

05.00.69 TIME LIMITS - MAINTENANCE CHECKS - 67-30 - 2008.01.28

Main Rotor Servo-control Attachment Bolts

AS 332 L2
SB INCORPORATED
2016.07.18 Page 1
 MSM

SB N° Subject ATA AD number Incorporation date

62.00.66 MAIN ROTOR - Swash plate Bearing 62-23 - 2008.01.28

Attachment screws

62.00.67 MAIN ROTOR - Inserting shims between 62-10 - 2008.01.28

vibration damper casing and blade

62.00.69 MAIN ROTOR - Safetying the cone restrainer 62-20 - 2008.09.01

support attachment bolts

05.00.81 TIME LIMITS - MAINTENANCE CHECKS 63-22 - 2009.05.14

- Check of the magnetic plug on the main
gearbox (MGB) epicyclic module - Main module
chip collector modification

05.00.72 TIME LIMITS - MAINTENANCE CHECKS - 25-66 - 2010.10.11

Jamming of the life-raft inflation control

05.00.78 TIME LIMITS - MAINTENANCE CHECKS - 21-51 and - 2010.10.11

Check of the fittings and lugs attaching the 21-52
cockpit air conditioning unit and cabin air
conditioning unit

05.00.79 LANDING GEAR - Check of the landing gear 32-31 - 2010.10.11

hydraulic unit

05.00.82 TIME LIMITS - MAINTENANCE CHECKS - 25-62 - 2010.10.11

Emergency flotation gear: Untimely deployment

05.00.83 TIME LIMITS - MAINTENANCE CHECKS - 52-12 - 2010.10.11

Side plug doors

05.00.84 TIME LIMITS - MAINTENANCE CHECKS - 53-23 - 2010.10.11

Visual check of the splicing of frame X5295

05.00.86 TIME LIMITS - MAINTENANCE CHECKS - 24-21 - 2010.10.11

Alternator bearings

30.00.56 ICE AND RAIN PROTECTION - Heater mat 30-21 - 2010.10.11

wiring modification

34.00.40 NAVIGATION - Maintenance of radar antenna 34-42 - 2010.10.11

slaving units

21.00.31 AIR CONDITIONING - Improved SECAN air 21-51 and - 2010.10.11

conditioning unit support fittings 21-52

53.01.52 FUSELAGE - Frame X5295 repair 53-23 - 2010.10.11

05.00.90R0 TIME LIMITS - MAINTENANCE CHECKS 24-23 and - 2012.02.24

- Changes to the maintenance intervals of 25-64
transformer-rectifiers MP/N 684-1009-200

AS 332 L2
SB INCORPORATED
2016.07.18 Page 2
 MSM

SB N° Subject ATA AD number Incorporation date

05.00.80R1 EQUIPMENT AND FURNISHINGS - 25-64 - 2013.12.12

Interference between the electrical power
supply harness of the hoist cable cutter squib
and the hoist fairing

05.00.92R1 TIME LIMITS - MAINTENANCE CHECKS 29-00 - 2013.12.12

- Hydraulic systems. Periodic check of the
flexible hoses

05.00.93R0 TIME LIMITS - MAINTENANCE CHECKS - 24-23 - 2013.12.12

Emergency electrical power system. Check
of the emergency hydro-electrical power unit
installation

26.00.23R0 FIRE PROTECTION - Improvement of MGB 26-13 - 2013.12.12

fire detector sealing

29.00.17R0 HYDRAULIC POWER - Replacement of 29-00 - 2013.12.12

TECALEMIT hydraulic hoses

52.00.40R1 DOORS - Improving the baggage compartment 52-31 - 2013.12.12

door locking system

31.00.19R0 INDICATING AND RECORDING SYSTEMS 24-92 - 2014.06.12

- Visual warnings - Electrical power supply of
warning panel “10WW”

05.00.89R1 TIME LIMITS - MAINTENANCE CHECKS - 23-71 and - 2015.01.15

CVR - EMERGENCY FLOTATION GEAR - 33-51
HEEL - CV/FDR - Check of the immersion
probe

53.01.80R0 FUSELAGE - Inclined drive shaft fairing - Pylon 53-76 - 2015.01.15

protection fairing improvement

53.01.86R0 STRUCTURE - Jettisoning system - Functional 52-12 - 2015.01.15

check of the emergency jettisoning system of
the sliding plug doors

29.00.19 Replacement of TECALEMIT hydraulic hoses 29–00 - 2016.07.18

R0

End of the Document Unit

AS 332 L2
SB INCORPORATED
2016.07.18 Page 3
 MSM

Task Number
MP/N (PN) Limit Type Interval Margin
Description/Remarks

ATA 21-AIR CONDITIONING

21-00 AIR CONDITIONING

21/00/00/000/000/010
Temperature probe
92202A01 (704A47232012) OC

21/00/00/000/000/040
Selector valve
14420B010001 (704A42114044) OC

21-11 COCKPIT AIR GENERATING SYSTEM

21/11/00/000/000/015
2-Position rotary actuator
3133 (704A43230007) OC

21-12 CABIN AIR GENERATING SYSTEM

21/12/00/000/000/000
Linear actuator
176185 (704A44111015) OC
176188 (704A44111017)

21-21 COCKPIT AIR DISTRIBUTION SYSTEM

21/21/00/000/000/000
Fans, secondary and standby
AE1708CA0 (704A42130028) OC

21/21/00/000/000/005
5-Position rotary actuator
7-3133 (704A43230009) OC

21/21/00/000/000/050
4-Position rotary actuator
5-3133 (-) OC

21-22 CABIN AIR DISTRIBUTION

21/22/00/000/000/070
2-Position rotary actuator
3133 (704A43230007) OC

AS 332 L2
05-10-00
2016.07.18 ATA 21 Page 1
 MSM

Task Number
MP/N (PN) Limit Type Interval Margin
Description/Remarks

21-41 P2 SYSTEM
21/41/00/000/000/020
Heating solenoid valve
14500C020000 (704A44613044) OC

21-50 OPT - AIR CONDITIONING SYSTEM

21/50/00/000/000/000
SECAN HP air conditioning unit assembly
OC

21/50/00/000/000/010
SECAN HP air conditioning unit - Fan
46-90262 (-) OC
46-90330 (-)
46-90330-1 (-)

End of the Document Unit

AS 332 L2
05-10-00
2016.07.18 ATA 21 Page 2
 MSM

Task Number
MP/N (PN) Limit Type Interval Margin
Description/Remarks

ATA 22-AUTO FLIGHT

22-31 AUTOPILOT HYDRAULIC UNIT

22/31/00/000/000/000
Filter element
CG0729103362N00 (-) OTL A 3600 FH X A 300 FH
Filter element cannot be cleaned. Replace element if clogging is detected.

22/31/00/000/000/010
Automatic pilot hydraulic unit
702A10-0092-00 (-) TBO A 3600 FH X A 300 FH
702A10-0092-01 (-)

22/31/00/000/000/020
Servovalve
30550-501 (704A44810013) TBO A 6000 FH X A 300 FH

22/31/00/000/000/025
Servovalve
A21495 (704A44810016) TBO A 7200 FH X A 300 FH
A84121 (704A44810016)
A84121-1 (704A44810016)
// 15 Y X A 180 D

End of the Document Unit

AS 332 L2
05-10-00
2015.01.15 ATA 22 Page 1
 MSM

Task Number
MP/N (PN) Limit Type Interval Margin
Description/Remarks

ATA 23-COMMUNICATIONS

23-52 OPT - UNIT CONTROL CENTRALIZED

23/52/00/000/000/000
ETC 40XXF installation, GPS/PTTI interface card - Battery
222-3025-905 (NR011000923) OTL A 1Y X TSI 0A
// 5Y X TSM 0A
Fitted to the interface card: MP/N 222-7012-201.

23-71 OPT - VOICE RECORDER

23/71/00/000/000/080
Recorder without EUROHUMS and EUROARMS option
980-6021-032 (704A45381025) OC
Fitted with THOMSON immersion probe MP/N 64762-001-1.
Fitted with emergency locator transmitter DK100 or DK120 or ELP362D.

End of the Document Unit

AS 332 L2
05-10-00
2015.10.29 ATA 23 Page 1
 MSM

Task Number
MP/N (PN) Limit Type Interval Margin
Description/Remarks

ATA 24-ELECTRICAL POWER

24-21 200 V/400 HZ THREE-PHASE GENERATING SYSTEM

24/21/01/000/000/000
30-40 kVA alternator
30030-1 (704A46220028) TBO A 3000 FH X A 300 FH
30030-2 (704A46220035)
// 10 Y X TSM 180 D
TSM or Overhaul.

24/21/01/000/000/010
20 kVA alternator
20031 (704A46220023) TBO A 3000 FH X A 300 FH
// 10 Y X TSM 180 D
TSM or Overhaul.

24/21/01/000/000/020
APU 30-40 kVA alternator
30030-1 (704A46220028) TBO A 3000 OPHX A 300 OPH
30030-2 (704A46220035)
// 10 Y X TSM 180 D
TSM or Overhaul.
OPH: APU operating hours.

24-23 OPT - EMERGENCY HYDROELECTRIC POWER

24/23/01/000/000/000
Emergency hydro-electrical power system
521354 (704A44330026) TBO A 5Y X A 0A

24/23/01/000/000/010
Emergency hydro-electrical power system - Regulator
MGCEA4A (704A44633023) OC

24/23/01/000/000/020
Emergency hydro-electrical power system - Transformer-rectifier
684-1009-200 (704A46230004) OC

24-32 MAIN BATTERY

24/32/00/000/000/000
43-Ah battery
40308-1 (704A46130041) OC
40308-5 (704A46130045)

AS 332 L2
05-10-00
2015.10.29 ATA 24 Page 1
 MSM

Task Number
MP/N (PN) Limit Type Interval Margin
Description/Remarks

24-33 STANDBY BATTERY

24/33/00/000/000/000
Emergency battery
BTS14A (704A46130054) OC
BTS89A (704A46130042)
EE0005-01 (704A46130026)
EE0005-011 (704A46130031)
EE0005-0111 (704A46130032)
EE0177 (704A46130042)

End of the Document Unit

AS 332 L2
05-10-00
2015.10.29 ATA 24 Page 2
 MSM

Task Number
MP/N (PN) Limit Type Interval Margin
Description/Remarks

ATA 25-EQUIPMENTS/FURNISHINGS

25-00 EQUIPMENT/FURNISHINGS
25/00/00/000/000/000
Belt straps - Harness - Medical installation straps
ALL MP/N (-) OC
Pilot, copilot, passenger and operator seat belt and harness straps.
Medical installation straps.
For seat belts and harnesses fitted with buckles manufactured by ANJOU, refer to chapter 04-10-00.

25/00/00/000/000/070
Harness installation - Quick release system
80049010 (704A41816095) TBO A 1Y X TSM 0A
TSM or Overhaul.
The maintenance shall be carried out only by personnel certified by Lite Flite.

25-31 OPT - SLING

25/31/02/000/000/000
Sling, 3 metric ton - Load release
AS21-7-2 (704A41811031) TBO A 5Y X A 180 D
AS21-7-3 (704A41811032)
// 1500 SC X A 150 SC
To be returned to the manufacturer.
Storage time limit 5 Y.

25/31/04/000/000/000
Rotating release unit
AS21-10 (704A41811033) TBO A 5Y X A 180 D
// 2000 SC X A 200 SC
To be returned to the manufacturer.
Storage time limit 5 Y.

25-62 OPT - EMERGENCY FLOATATION GEAR

25/62/01/000/000/000
Forward left float
212594-0 (-) OTL A 10 Y X TSM 180 D
212594-1 (-)
213428-0 (-)
213428-1 (-)
213428-2 (-)

To determine whether a time extension can be granted, return the assembly in question
to the manufacturer for examination.

AS 332 L2
05-10-00
2016.07.18 ATA 25 Page 1
 MSM

Task Number
MP/N (PN) Limit Type Interval Margin
Description/Remarks

25/62/01/000/000/020
Forward right float
212479-0 (-) OTL A 10 Y X TSM 180 D
212479-1 (-)
213429-0 (-)
213429-1 (-)
213429-2 (-)

To determine whether a time extension can be granted, return the assembly in question
to the manufacturer for examination.

25/62/01/000/000/040
Aft left float
212512-0 (-) OTL A 10 Y X TSM 180 D
212512-1 (-)
212512-2 (-)

To determine whether a time extension can be granted, return the assembly in question
to the manufacturer for examination.

25/62/01/000/000/060
Aft right float
212597-0 (-) OTL A 10 Y X TSM 180 D
212597-1 (-)
212597-2 (-)

To determine whether a time extension can be granted, return the assembly in question
to the manufacturer for examination.

25/62/01/000/000/120
Forward cylinder
212029-0 (704A42693002) OTL A 15 Y X TSM 0A
212029-1 (704A42693017)

Return the equipment to an approved repairer for overhaul and replacement of the bare cylinder.

25/62/01/000/000/140
Aft cylinder
212030-0 (704A42693003) OTL A 15 Y X TSM 0A
212030-1 (704A42693004)
212030-2 (704A42693008)

Return the equipment to an approved repairer for overhaul and replacement of the bare cylinder.

25-64 OPT - HOIST

25/64/01/000/000/000
Hydraulic hoist 75 m / 600 lbs, variable speed
76368-240 (704A41815062) TBO A 4Y X A 146 D
76368-240-D (704A41815083)
// 2000 HC X A 200 HC

AS 332 L2
05-10-00
2016.07.18 ATA 25 Page 2
 MSM

Task Number
MP/N (PN) Limit Type Interval Margin
Description/Remarks

25/64/01/000/000/020
Hydraulic hoist 75 m / 600 lbs, variable speed - Cable
710696 (-) OTL A 4 Y X TSI 0A
710696-100 (-)
// 9 Y X TSM 0A
// 500 HC X A 0A
Normal climatic conditions
TSM in original package.

25/64/01/000/000/030
Hydraulic hoist 75 m / 600 lbs, variable speed - Cable
710696 (-) OTL A 2 Y X TSI 0A
710696-100 (-)
// 7 Y X TSM 0A
// 500 HC X A 0A
Tropical and damp atmosphere
Salt-laden atmosphere
Sand-laden and/or dust-laden atmosphere
TSM in original package.

25/64/02/000/000/020
Hoist (40 m, 75 m) - Pyrotechnic cartridge
20CF4D (N6714400100) OTL A 3Y X TSI 0A
// 5Y X TSM 0A
TSM in original package.

25/64/03/000/000/000
Electrical hoist 28 VDC 40 m / 300 lbs, fixed speed
76370-130 (704A41815035) TBO A 4Y X A 146 D
76370-140-D (704A41815085)
// 1500 HC X A 150 HC

25/64/03/000/000/080
Electrical hoist 28 VDC 40 m / 300 lbs, fixed speed - Cable
710656 (-) OTL A 4 Y X TSI 0A
710656-100 (-)
// 9 Y X TSM 0A
// 500 HC X A 0A
Normal climatic conditions
TSM in original package.

25/64/03/000/000/090
Electrical hoist 28 VDC 40 m / 300 lbs, fixed speed - Cable
710656 (-) OTL A 2 Y X TSI 0A
710656-100 (-)
// 7 Y X TSM 0A
// 500 HC X A 0A
Tropical and damp atmosphere
Salt-laden atmosphere
Sand-laden and/or dust-laden atmosphere
TSM in original package.

AS 332 L2
05-10-00
2016.07.18 ATA 25 Page 3
 MSM

Task Number
MP/N (PN) Limit Type Interval Margin
Description/Remarks

25/64/05/000/000/000
Electrical hoist - Transformer-rectifier
684-1009-200 (704A46230004) OC

25/64/06/000/000/000
Electrical hoist 28 VDC 90 m / 600 lbs, variable speed
42325-16-4 (704A41815104) TBO A 10 Y X TSM 180 D
// 3330 HC X A 333 HC
TSM or Overhaul.

25/64/06/000/000/020
Electrical hoist 28 VDC 90 m / 600 lbs, variable speed - Cable
42325-162 (-) OTL A 2 Y X TSI 0A
// 7 Y X TSM 0A
// 1500 HC X A 0A
Tropical and damp atmosphere
Salt-laden atmosphere
Sand-laden and/or dust-laden atmosphere
TSM in original package.

25/64/06/000/000/050
Electrical hoist 28 VDC 90 m / 600 lbs, variable speed - Cable
42325-162 (-) OTL A 4 Y X TSI 0A
// 9 Y X TSM 0A
// 1500 HC X A 0A
Normal climatic conditions
TSM in original package.

25/64/06/000/000/110
Electrical hoist 28 VDC 90 m / 600 lbs, variable speed - Pyrotechnic cartridge
42315-281 (-) OTL A 5Y X TSM 0A
TSM in original package.

25-66 OPT - EMERGENCY EQUIPMENTS

25/66/00/000/000/000
Portable lamp - Battery
TYPE LR6 (-) OTL A 1Y X A 36 D
To be replaced every year from the date of installation marked on the portable lamp.

25/66/01/000/000/000
Life raft
CMM 25.60.96 00051054 (NR001500728) TBO A 1Y X TSM 0A
00051055 (NR001500729)

TSM or Overhaul

AS 332 L2
05-10-00
2016.07.18 ATA 25 Page 4
 MSM

Task Number
MP/N (PN) Limit Type Interval Margin
Description/Remarks

25/66/01/000/000/015
Emergency pack assy
CMM 25.60.96 00004209 (-) TBO A 1Y X TSM 36 D
TSM or Overhaul.

25/66/01/000/000/030
Cylinder
41918001 (-) OTL A 15 Y X TSM 0A
41918002 (NR006800046)

Return the equipment to an approved repair station for Overhaul and replacement of the unequipped bottle.

25/66/01/000/000/050
Cylinder
41918001 (-) TBO A 5Y X TSM 0A
41918002 (NR006800046)

Cylinder proof pressure check.

TSM or Overhaul.

25/66/02/000/000/000
Emergency locator transmitter - Battery kit
CMM 25.65.97 606-180-001 (NR017700738) OTL A A ED X A 0A
BCAL CPT 606.

25/66/02/000/000/020
Deployement mechanism - Battery
CMM 25.65.98 00-23-1099 (704A46132002) OTL A 2Y X TSI 0A
// 5Y X TSM 0A
BCAL CPT 606.
TSM in original package.

25/66/02/000/000/040
Pyrotechnic cartridge
CMM 25.65.98 BC85-070 (NR663700001) OTL A 1Y X TSI 0A
// 5Y X TSM 0A
BCAL CPT 606.
TSM in original package.

25/66/03/000/000/010
Emergency Locator Transmitter - Battery
A01577 (-) OTL A A ED X A 0A
CPI 503.
Beacon to be returned to the manufacturer for replacement of the battery and the attaching screw.
During the installation of the ELT put the new attaching screw.

AS 332 L2
05-10-00
2016.07.18 ATA 25 Page 5
 MSM

Task Number
MP/N (PN) Limit Type Interval Margin
Description/Remarks

25/66/03/000/000/020
Emergency Locator Transmitter - Interface unit - Battery
CMM 25.61.99 A01011 (NR033500002) OTL A 1 Y X TSI 0A
// A ED X A 0A
CPI 503.
Replacement of the battery.

25/66/03/000/000/025
Emergency locator transmitter - Interface unit
503-24-G (704A45751333) TBO A 10 Y X TSM 0A
CPI 503.
Beacon to be returned to the manufacturer.

25/66/03/000/000/030
Emergency locator transmitter - Ejection unit
503-21 (704A45737059) TBO A 10 Y X TSM 0A
// 1 OPHX A 0A
CPI 503.
Beacon to be returned to the manufacturer.
1 OPH = 1 deployment.

25/66/03/000/000/050
Emergency locator transmitter
503-16 (704A45737056) TBO A 10 Y X TSM 0A
503-16-25 (704A45737080)
// 1 OPHX A 0A
CPI 503.
Beacon to be returned to the manufacturer.
1 OPH = 1 deployment or transmission.

25/66/04/000/000/000
Anchor sea
204527-01 (-) OC

25/66/05/000/000/000
Battery
120093-1 (704A46132000) OC
135417-1 (704A46132000)

LEIGH CPI 113.

25/66/05/000/000/020
Battery pack
CMM 25.60.03 126568-1 (-) OTL A 4 Y X TSM 0A
126568-3 (704A36132006)
// 1 OPHX A 0A
LEIGH CPI 113.
1 OPH = 1 hour of operation except for testing.

AS 332 L2
05-10-00
2016.07.18 ATA 25 Page 6
 MSM

Task Number
MP/N (PN) Limit Type Interval Margin
Description/Remarks

25/66/05/000/000/030
Pyrotechnic cartridge
CMM 25.60.03 11430-2 (-) OTL A 3Y X TSM 0A
LEIGH CPI 113.

25/66/05/000/000/060
Rechargeable battery
CMM 25.60.03 10114-1 (-) OTL A 4Y X TSM 146 D
LEIGH CPI 113.
Fitted on assemblies: MP/N 135417-1 or MP/N 120093-1.

25/66/06/000/000/000
Battery
GS21 (-) OTL A 2Y X TSM 0A
EBC 302HM.

25/66/08/000/000/000
Battery pack
JE2-1978-3 (N6742450122) OTL A A ED X A 0A
JE2-1978-3NG (NR003100026)

JOLLIET JE2/JE2 NG.

If the transmitter functions for more than one hour, replace the battery pack.

25/66/09/000/000/000
Emergency locator transmitter
266E0305-00 (704A45737016) TBO A A ED X A 0A
DUKANE DK100.
Beacon to be returned to the manufactuer.

25/66/10/000/000/000
Emergency locator transmitter - Battery pack
CMM 25.69.93 ELT90A2560102001 (-) OTL A 4 Y X TSM 0A
// 1 OPHX A 0A
ELT 96406 SOCATA (MP/N ELT 96A2560000000).
1 OPH = 1 hour of operation except for testing.

25/66/11/000/000/000
Emergency locator transmitter - Battery kit
CMM 25.60.03 606-180-001 (NR017700738) OTL A A ED X A 0A
BCAL CPT 609.

AS 332 L2
05-10-00
2016.07.18 ATA 25 Page 7
 MSM

Task Number
MP/N (PN) Limit Type Interval Margin
Description/Remarks

25/66/11/000/000/020
Deployment mechanism - Battery
CMM 25.60.02 00-23-1099 (704A46132002) OTL A 2Y X TSI 0A
// 5Y X TSM 0A
BCAL CPT 609.
TSM in original package.

25/66/11/000/000/040
Pyrotechnic cartridge
CMM 25.60.02 BC85-070 (NR663700001) OTL A 1Y X TSI 0A
BC85-070-1 (704A38710052)
// 5Y X TSM 0A
BCAL CPT 609.
TSM in original package.

25/66/12/000/000/000
Emergency locator transmitter - Battery pack
CMM 25.66.97 810-2007-K (-) OTL A A ED X A 0A
DUKANE DK120.

25/66/13/000/000/000
Emergency locator transmitter
TBO A A ED X A 0A
DATASONIC ELP 362D.
With a serial number beginning with "S".
Beacon to be returned to the manufacturer.

25/66/13/000/000/010
Emergency locator transmitter
B362-06192-1 (-) OTL A A ED X A 0A
B362-06192-2 (-)

DATASONIC ELP 362D.

With a serial number not beginning with "S".
.

25/66/15/062/000/000
Emergency locator transmitter - Battery pack
CMM 25.63.05 S1820516-99 (-) OTL A A ED X A 0A
// 1 OPHX A 0A
KANNAD 406AF/AP.
1 OPH = 1 hour of operation except for testing or operation for an unknown duration.

25/66/16/000/000/010
Portable emergency locator transmitter - Battery pack
CMM 25.56.97 A0696Y (-) OTL A A ED X A 0A
// 1 OPCX A 0A
H.R. SMITH 500.
1 OPC = 1 utilization (emergency beacon or transceiver mode).

AS 332 L2
05-10-00
2016.07.18 ATA 25 Page 8
 MSM

Task Number
MP/N (PN) Limit Type Interval Margin
Description/Remarks

25-68 OPT - ROPING INSTALLATION

25/68/00/000/000/000
Roping down system - Hook
AS29-025-02 (-) TBO A 5 Y X TSM 0A
AS29-05-02 (704A41815092)
// 1000 RC X A 0A

End of the Document Unit

AS 332 L2
05-10-00
2016.07.18 ATA 25 Page 9
 MSM

Task Number
MP/N (PN) Limit Type Interval Margin
Description/Remarks

ATA 26-FIRE PROTECTION

26-13 MGB FIRE DETECTION SYSTEM

26/13/00/000/000/000
Detector
332A08-8651-02 (-) OC
C33 (-)
H342 (704A42820033)
H352 (704A42820050)

26-21 ENGINE FIRE EXTINGUISHING SYSTEM

26/21/00/000/000/005
Fire extinguisher, engine
862690-00 (704A42820028) OC
863490-00 (704A42820038)
863490-01 (704A42820046)

26/21/00/000/000/020
Pyrotechnic cartridge
861345 (704A38710020) OTL A 3Y X TSI 0A
861355 (704A38710021)
// 42 M X TSM 0A

26/21/00/000/000/034
Pyrotechnic cartridge
863080-00 (704A38710040) OTL A 5Y X TSI 0A
863085-00 (704A38710041)
// 7Y X TSM 0A

26/21/00/000/000/050
Double check valve
861-260-01 (704A34635049) OC
CR418Z5AERO (704A34635049)

26-22 CABIN FIRE EXTINGUISHER

26/22/00/000/000/000
Portable extinguisher
BA51012GR-3 (-) OTL A 10 Y X TSM 0A
BA51012R-3 (704A32810015)
BA51012R-5 (704A32810020)

26-24 OPT - APU FIRE EXTINGUISHING SYSTEM

26/24/01/000/000/004
Extinguisher bottle
25700-1 (704A42820029) OC
25700-2 (704A42820037)
25700-3 (-)
25700-4 (704A42820045)

AS 332 L2
05-10-00
2015.10.29 ATA 26 Page 1
 MSM

Task Number
MP/N (PN) Limit Type Interval Margin
Description/Remarks

26/24/01/000/000/015
Pyrotechnic cartridge
30600-18 (704A38710036) OTL A 5Y X TSI 0A
// 7Y X TSM 0A

End of the Document Unit

AS 332 L2
05-10-00
2015.10.29 ATA 26 Page 2
 MSM

Task Number
MP/N (PN) Limit Type Interval Margin
Description/Remarks

ATA 28-FUEL

28-17 FUEL TANK TRANSFER SYSTEM

28/17/01/000/000/000
Fuel transfer pump
228487 (704A44510041) OC

28-20 FUEL SUPPLY

28/20/00/000/000/000
Pump
203902 (704A44510031) TBO A 1800 FH XA 0A
C11BD0012 (704A44510034)

28/20/00/000/000/010
Pump
P94C16-608 (704A44510037) TBO A 2000 FH XA 0A
P99C16-610 (704A44510050)

28/20/00/000/000/020
Fuel tank
ALL MP/N (-) OC

28/20/00/000/000/040
Fuel filter unit
4020P25-2 (704A44620035) OC
4020P25-3 (704A44620036)
4020P25-5 (704A44620049)

28/20/00/000/000/050
Filter - Filter element
402B25-1 (704A34629021) OTL A 2000 FH XA 0A
402B25-11 (704A34629024)

28/20/00/000/000/060
Filter, fuel
433D25-41 (704A44620023) OC
433D25-42 (704A44620038)

28/20/00/000/000/070
Filter - Filter element
57189 (NR007702930) OTL A 2000 FH XA 0A
57189-1 (NR007702939)

End of the Document Unit

AS 332 L2
05-10-00
2013.12.12 ATA 28 Page 1
 MSM

Task Number
MP/N (PN) Limit Type Interval Margin
Description/Remarks

ATA 29-HYDRAULIC POWER

29-11 LEFT HYDRAULIC SYSTEM

29/11/00/000/000/000
Electro-pump
GEP130-2 (704A44321013) TBO A 1000 FH X A 0A
GEP130-3 (704A44321014)

29/11/00/000/000/010
Auxiliary electro-pump
GEP130-4 (704A44321015) TBO A 3000 FH X A 0A

29/11/00/000/000/020
Self-regulating pump
C24160041-100 (704A44320035) TBO A 3000 FH X A 300 FH
C24160041-2 (704A44320039)
C24160041-200 (704A44320043)
C24160045-1 (704A44320027)
C24160045-100 (704A44320037)
C24160045-2 (704A44320041)
C24160045-200 (704A44320045)

29/11/00/000/000/030
Left level sensor
808983 (-) OC

29-12 RIGHT HYDRAULIC SYSTEM

29/12/00/000/000/000
Self-regulating pump
C24160042-100 (704A44320034) TBO A 3000 FH X A 300 FH
C24160042-2 (704A44320040)
C24160042-200 (704A44320044)
C24160046-1 (704A44320026)
C24160046-100 (704A44320036)
C24160046-2 (704A44320042)
C24160046-200 (704A44320046)

29/12/00/000/000/010
Sensor, right level
808984 (-) OC

AS 332 L2
05-10-00
2015.01.15 ATA 29 Page 1
 MSM

Task Number
MP/N (PN) Limit Type Interval Margin
Description/Remarks

29-21 LANDING GEAR EMERGENCY SYSTEM

29/21/00/000/000/000
Emergency electric pump
A5029190 (704A44310025) OC

End of the Document Unit

AS 332 L2
05-10-00
2015.01.15 ATA 29 Page 2
 MSM

Task Number
MP/N (PN) Limit Type Interval Margin
Description/Remarks

ATA 30-ICE AND RAIN PROTECTION

30-22 OPT - ELECTRICAL MULTI-PURPOSE AIR INTAKES

30/22/00/000/000/020
Electrical multi-purpose air intakes - Actuator
8271 (704A44111010) OTL A 3000 FH X A 0A
8271-1 (704A44111012)

30-42 PILOT’S AND COPILOT’S WINDSCREEN WIPERS

30/42/00/000/000/000
Dual-output motor
11F100-76A (N6789410300) OC
4011501 (N6789410300)

End of the Document Unit

AS 332 L2
05-10-00
2015.01.15 ATA 30 Page 1
 MSM

Task Number
MP/N (PN) Limit Type Interval Margin
Description/Remarks

ATA 32-LANDING GEAR

32-12 RETRACTABLE MAIN LANDING GEAR

32/12/00/000/000/020
Left shock absorber assy
C23953-000-1 (704A41421081) OC
C23953000-2 (704A41421084)

32/12/00/000/000/030
Right shock absorber assy
C23954-000-1 (704A41421082) OC
C23954000-2 (704A41421083)

32/12/00/510/000/100
Left trailing arm
C23951-000 (704A41421072) OTL A20000 FH X A 300 FH

32/12/00/510/000/200
Right trailing arm
C23952-000 (704A41421071) OTL A20000 FH X A 300 FH

32-22 RETRACTABLE NOSE LANDING GEAR

32/22/00/000/000/000
Landing gear leg
C23943-209 (704A41420052) TBO A20000 FH X A 300 FH

32/22/00/000/000/010
Forward actuator strut
C23947-030 (704A41430020) TBO A20000 FH X A 300 FH

32-41 MAIN LANDING GEAR WHEEL

32/41/00/000/000/000
Wheel
C20147200 (704A41412008) OC

AS 332 L2
05-10-00
2016.07.18 ATA 32 Page 1
 MSM

Task Number
MP/N (PN) Limit Type Interval Margin
Description/Remarks

32-42 NOSE LANDING GEAR WHEEL

32/42/00/000/000/000
Wheel
A20217-121 (704A41412005) OC
C20525000 (704A41412014)

32-43 BRAKES
32/43/00/000/000/000
Landing gear wheel brake
C20039-1 (704A41410009) OC

32-72 OPT - SKI

32/72/01/000/000/020
Skis - Tip ski
ALL MP/N (-) OC

32/72/01/000/000/030
Skis - Aft cable
13A1000006 (-) OTL A10000 LC X A 0A
HUREL DUBOIS.

32/72/01/000/000/040
Skis - Main landing gear mechanics jack
13A1000005 (-) OTL A10000 LC X A 0A
HUREL DUBOIS.

32/72/01/000/000/050
Skis - Nose landing gear mechanics jack
13A1000008 (-) TBO A 5Y X A 180 D
// 5000 LC X A 500 LC
HUREL DUBOIS.

32/72/01/000/000/060
Skis - Oleopneumatic jack
13A1000010 (-) TBO A 5Y X A 180 D
// 5000 LC X A 500 LC
HUREL DUBOIS.

32/72/01/000/000/070
Skis - Lever
13A1504211 (-) TBO A 5Y X A 180 D
// 5000 LC X A 500 LC
HUREL DUBOIS.

AS 332 L2
05-10-00
2016.07.18 ATA 32 Page 2
 MSM

Task Number
MP/N (PN) Limit Type Interval Margin
Description/Remarks

End of the Document Unit

AS 332 L2
05-10-00
2016.07.18 ATA 32 Page 3
 MSM

Task Number
MP/N (PN) Limit Type Interval Margin
Description/Remarks

ATA 33-LIGHTS

33-43 LANDING LIGHT

33/43/02/000/000/000
Retractable searchlight
4202104 (704A46820019) OC

33/43/04/000/000/005
Infra-red light
72-20 (704A46820035) OC

33-45 OPT - SEARCHLIGHT

33/45/03/000/000/000
Searchlight - Gimbal arm
CMM 33.45.96 019058 (-) OTL A 7Y X A 180 D
019058-21 (-)
021715 (-)

SPECTROLAB SX16.
Aluminum arm only.

33/45/03/000/000/010
Searchlight - Gimbal arm
CMM 33.45.96 022929 (-) OTL A 10 Y X A 180 D
022929-11 (-)
022929-81 (-)

SPECTROLAB SX16.
Steel arm only.

33-51 OPT - EMERGENCY LIGHTING

33/51/00/000/000/030
HEEL installation - Box power supply
6958-2 (706A36140000) OC

33/51/00/000/000/040
HEEL installation - Battery
5776-1 (-) OC

33/51/71/000/000/000
Power pack
BHLCOMP1150-001 (800G46830028) OTL A 2Y X TSI 0A
BHLCOMP1163-001 (800G46830029)
BHLCOMP1167-001 (800G46830030)
// 3Y X TSM 0A

TSM in original package.

End of the Document Unit

AS 332 L2
05-10-00
2015.01.15 ATA 33 Page 1
 MSM

Task Number
MP/N (PN) Limit Type Interval Margin
Description/Remarks

ATA 34-NAVIGATION

34-42 RADAR
34/42/01/000/000/010
Radar antenna - Drive system
4000504-0301 (N6707152800) TBO A 3000 FH XA 300 FH
4000504-0303 (N6707154000)
// 3Y XA 109 D
DA1203A.
Return the equipment to an approved repair station for overhaul.
Fitted on radar antenna 1400.

End of the Document Unit

AS 332 L2
05-10-00
2012.11.29 ATA 34 Page 1
 MSM

Task Number
MP/N (PN) Limit Type Interval Margin
Description/Remarks

ATA 36-PNEUMATIC

36-00 PNEUMATIC SYSTEM

36/00/00/000/000/000
Filter - Filter element
MMA 36.00.00.612a 217-2 (NR084515220) OTL A 3000 FH XA 0A
217-3 (NR084515221)

PRE MOD 0726363.

Filter 217A-01.

36/00/00/000/000/010
Filter - Filter element
MMA 36.00.00.612b 56932 (NR007700450) OTL A 3000 FH XA 0A
PRE MOD 0726363.
Filter 461A6-3.

36/00/00/000/000/070
Pressure reducing valve
2416AC020101 (704A42118007) OC
POST MOD 0726363.

End of the Document Unit

AS 332 L2
05-10-00
2013.12.12 ATA 36 Page 1
 MSM

Task Number
MP/N (PN) Limit Type Interval Margin
Description/Remarks

ATA 45-CENTRAL MAINT SYSTEM

45-11 OPT - MAINTENANCE SYSTEM

45/11/02/000/000/000
EUROHUMS - Recorder
D51508 (704A49430007) TBO A 5000 FH XA 300 FH
Fitted with emergency locator transmitter DK100.

45/11/02/000/000/010
EUROHUMS - DFDAU recorder - Battery
BR1225-1HB (-) OTL A 4Y XA 0A
BR1225-1HC (-)
BR1225-1HD (-)
BR1225-T2 (-)
BR1225-T2-1 (-)

Fitted to assemblies DFDAU MP/N 2237000-8-A-1 and MP/N 2237000-11.

The DFDAU is to be returned to the manufacturer or to an approved workshop for replacement of the battery.
Replacement of the battery is needed only for aircrafts fitted with HUMS/UMS.

45/11/06/000/000/130
EUROARMS - Recorder
980-6021-032 (704A45381025) OC
Fitted with THOMSON immersion probe MP/N 64762-001-1.
Fitted with emergency locator transmitter DK100, DK120 or ELP 362D.

End of the Document Unit

AS 332 L2
05-10-00
2012.11.29 ATA 45 Page 1
 MSM

Task Number
MP/N (PN) Limit Type Interval Margin
Description/Remarks

ATA 49-AUXILIARY POWER UNIT

49-21 OPT - APU

49/21/02/000/000/010
Sand filter
QB0627 (704A41650011) OC

End of the Document Unit

AS 332 L2
05-10-00
2014.06.12 ATA 49 Page 1
 MSM

Task Number
MP/N (PN) Limit Type Interval Margin
Description/Remarks

ATA 62-ROTOR (S)

62-10 MAIN ROTOR BLADES

62/10/00/000/000/010
Anti-vibrator unit
332A11-0460-02 (-) OC
332A11-0460-03 (-)
332A11-0460-04 (-)

62/10/00/000/000/020
Anti-vibrator bearing
71905HDFJ94 (704A33652076) OTL A 2250 FH XA 225 FH
NA4905BIR (704A33653135)

62/10/00/000/000/030
Anti-vibrator bearing
NA4905R2000 (704A33653139) OTL A 2250 FH XA 225 FH
This part number is not mixable with the other part numbers.

62-20 MAIN ROTOR SHAFT ASSEMBLY

62/20/00/000/000/030
Rotor shaft assembly - Swashplate - Flared casing
332A31-2000-00 (-) TBO A 1500 FH XA 150 FH
// 24 Y XA 180 D
No provision for HUMS.

62/20/00/000/000/040
Rotor shaft assembly - Swashplate - Flared casing
332A31-2000-01 (-) TBO A 1500 FH XA 150 FH
332A31-2000-02 (-)
332A31-2100-00 (-) // 24 Y XA 180 D
Provision for HUMS.

62/20/00/000/000/050
Rotor shaft assembly - Swashplate - Flared casing
332A31-2000-03 (-) TBO A 2000 FH XA 0A
332A31-2100-01 (-)
// 24 Y XA 0A
Provision for HUMS.

62/20/00/000/000/060
Swashplate bearing
330A31-9830-23 (-) OTL A 2000 FH (P) A 0A
330A31-9831-23 (-)

62/20/00/000/000/070
Rotor shaft bearing
704A33-651-146 (-) OTL A 1500 FH XA 150 FH

AS 332 L2
05-10-00
2013.12.12 ATA 62 Page 1
 MSM

Task Number
MP/N (PN) Limit Type Interval Margin
Description/Remarks

62/20/00/000/000/080
Rotor shaft bearing
704A33-651-147 (-) OTL A 4000 FH XA 300 FH

62-21 MAIN ROTOR HUB

62/21/00/000/020/011
Sleeve assy
332A31-2001-00 (-) OC
332A31-2001-01 (-)
332A31-2101-00 (-)

62/21/00/000/050/000
Pair of hydro-elastic damper
332A31-1980-02 (-) TBO A 1000 FH XA 0A
332A31-1980-04 (-)
// 5Y X TSM 0A
TSM or General Overhaul.

62/21/00/000/050/002
Pair of hydro-elastic damper
332A31-1980-05 (-) TBO A 1000 FH XA 0A
332A31-1980-06 (-)
// 10 Y X TSM 0A
TSM or General Overhaul.

62/21/00/000/050/030
Blade sleeve assembly
332A31-2003-00 (-) OC

62/21/00/000/050/040
Folding blade sleeve
332A31-2103-00 (-) OC

62-23 CONTROL SYSTEM

62/23/00/000/200/000
Adjustable rod assembly
332A31-1780-10 (-) OC
332A31-1780-12 (-)

62/23/00/000/200/010
Fixed rod assembly
332A31-1780-11 (-) OC
332A31-1780-13 (-)

62-24 DOME FAIRING

62/24/01/210/000/000
Fairing assy
332A31-1816-00 (-) OC

AS 332 L2
05-10-00
2013.12.12 ATA 62 Page 2
 MSM

Task Number
MP/N (PN) Limit Type Interval Margin
Description/Remarks

End of the Document Unit

AS 332 L2
05-10-00
2013.12.12 ATA 62 Page 3
 MSM

Task Number
MP/N (PN) Limit Type Interval Margin
Description/Remarks

ATA 63-ROTOR DRIVE (S)

63-11 MGB DRIVE SHAFT

63/11/00/000/000/003
Engine-MGB coupling shaft assy
332A54-0216-04 (-) TBO A 4800 FH X A 300 FH
332A54-0216-05 (-)
332A54-0216-06 (-)
// 24 Y X A 180 D
332A54-0217-00 (-)
332A54-0217-01 (-)

63-20 MAIN GEARBOX

63/20/00/000/000/000
MGB assy
332A32-3000-00 (-) OC
No provision for HUMS.

63/20/00/000/000/010
MGB assy
332A32-3001-00 (-) OC
332A32-3001-02 (-)
332A32-3001-03 (-)

Provision for HUMS.

63-21 MAIN REDUCTION GEAR

63/21/00/000/000/005
Main reduction gear module
332A32-3010-00 (-) TBO A 3000 FH X A 300 FH
// 24 Y X A 180 D
No provision for HUMS.

AS 332 L2
05-10-00
2015.01.15 ATA 63 Page 1
 MSM

Task Number
MP/N (PN) Limit Type Interval Margin
Description/Remarks

63/21/00/000/000/010
Main reduction gear module
332A32-3011-00 (-) TBO A 3000 FH X A 300 FH
332A32-3011-01 (-)
332A32-3011-02 (-)
// 24 Y X A 180 D
332A32-3011-03 (-)
332A32-3011-04 (-)
332A32-3011-05 (-)
332A32-3011-06 (-)
332A32-3011-07 (-)
332A32-3011-08 (-)
332A32-3011-09 (-)
332A32-3011-10 (-)
332A32-3011-11 (-)
332A32-3011-12 (-)
332A32-3011-13 (-)
332A32-3011-15 (-)
332A32-3011-16 (-)
332A32-3011-17 (-)
332A32-3011-18 (-)

Provision for HUMS.

63-22 EPICYCLIC REDUCTION GEAR

63/22/00/000/000/010
Epicyclic reduction gear module
332A32-3020-00 (-) TBO A 2500 FH X A 250 FH
332A32-3020-01 (-)
// 24 Y X A 180 D
No provision for HUMS.

63/22/00/000/000/020
Epicyclic reduction gear module
332A32-3021-00 (-) TBO A 2500 FH X A 250 FH
332A32-3021-01 (-)
// 24 Y X A 180 D
PRE MOD 0752454 // 0752460 // 0752462 & PRE MOD 0752455 // 0752461 // 0752463.
Provision for HUMS.

63/22/00/000/000/025
Epicyclic reduction gear module
332A32-3021-00 (-) TBO A 3000 FH X A 300 FH
332A32-3021-01 (-)
// 24 Y X A 180 D
POST MOD 0752454 // 0752460 // 0752462 & POST MOD 0752455 // 0752461 // 0752463.
Provision for HUMS.

63-23 ACCESSORY DRIVE GEARBOXES

63/23/01/000/000/000
Left accessory gearbox
332A32-2025-02 (-) TBO A 3000 FH X A 300 FH
332A32-2025-03 (-)
332A32-2025-04 (-)
// 24 Y X A 180 D
332A32-2025-06 (-)

AS 332 L2
05-10-00
2015.01.15 ATA 63 Page 2
 MSM

Task Number
MP/N (PN) Limit Type Interval Margin
Description/Remarks

63/23/02/000/000/000
Right accessory gearbox
332A32-2017-02 (-) TBO A 3000 FH X A 300 FH
// 24 Y X A 180 D

63-24 MGB LUBRICATION SYSTEM

63/24/01/000/000/010
Filter element
MMA 63.20.00.211 FL1004-002 (-) OTL A 400 FH X A 40 FH
QA06099 (-)
63.20.00.211.041 // 2Y X A 73 D
Mineral oil 0.155.

63/24/01/000/000/020
Filter element
MMA 63.20.00.211 FL1004-002 (-) OTL A 600 FH X A 60 FH
QA06099 (-)
63.20.00.211.041 // 3Y X A 109 D
Synthetic oil 0.148 ou 0.156.

63/24/02/000/000/000
Main lubrication pump
177560 (704A44313031) TBO A 3000 FH X A 300 FH
31-75103-4034-5 (704A44313029)
// 24 Y X A 180 D

63/24/02/000/000/010
Emergency lubrication pump
177590 (704A44313032) TBO A 3000 FH X A 300 FH
31-75103-4035-5 (704A44313030)
31-75103-4051-5 (704A44313034)
// 24 Y X A 180 D

63/24/03/000/000/000
MGB oil cooler
11-841212-3 (704A33220033) OC

63/24/03/000/100/000
Fan assy
AM2621A-A0-0000 (704A43691025) OC
AM2621A02 (704A43691037)

Fitted on assemblies: MP/N 332A39-1000-00/-01/-02 and -03.

63/24/03/000/100/005
Fan assy
AM2621A01 (704A43691026) OC
AM2621A02 (704A43691037)

Fitted on assembly: MP/N 332A39-1000-03.

AS 332 L2
05-10-00
2015.01.15 ATA 63 Page 3
 MSM

Task Number
MP/N (PN) Limit Type Interval Margin
Description/Remarks

63/24/03/000/300/000
Fan drive shaft assembly
332A39-1006-00 (-) OC
332A39-1006-01 (-)

Fitted on assemblies: MP/N 332A39-1000-00/-01/-02 and -03.

63-25 ROTOR BRAKE

63/25/00/000/000/000
BENDIX rotor brake
2609914-2 (704A43620011) OC

End of the Document Unit

AS 332 L2
05-10-00
2015.01.15 ATA 63 Page 4
 MSM

Task Number
MP/N (PN) Limit Type Interval Margin
Description/Remarks

ATA 64-TAIL ROTOR

64-20 TAIL ROTOR POWER TRANSMISSION SYSTEM

64/20/00/000/000/000
TGB assembly
332A36-3001-00 (-) TBO A 3500 FH XA 300 FH
// 24 Y XA 180 D
No provision for HUMS.

64/20/00/000/000/010
TGB assembly
332A36-3002-00 (-) TBO A 3500 FH XA 300 FH
// 24 Y XA 180 D
Provision for HUMS.

64/20/00/000/100/010
Adapter assembly
332A33-1130-01 (-) OC
332A33-1130-02 (-)

64/20/00/000/300/000
Pitch control assembly
332A33-1230-01 (-) OC

End of the Document Unit

AS 332 L2
05-10-00
2012.11.29 ATA 64 Page 1
 MSM

Task Number
MP/N (PN) Limit Type Interval Margin
Description/Remarks

ATA 65-TAIL ROTOR DRIVE

65-11 REAR TRANSMISSION

65/11/00/000/000/000
Tail rotor power transmission system
OC

65/11/00/000/000/005
Tail rotor drive - Shaft regreasable bearing
593354 (704A33651178) OTL A 3600 FH XA 300 FH
593363 (704A33651179)
83A904ECS56 (704A33651149) // 5Y XA 180 D
83A904FCS56 (704A33651151)
9109NP3 (704A33651148)
G9109NPP4 (704A33651152)

65-30 INTERMEDIATE GEARBOX

65/30/00/000/000/000
IGB assy
332A35-0011-01 (-) TBO A 2700 FH XA 0A
332A35-0011-02 (-)
// 24 Y XA 0A

End of the Document Unit

AS 332 L2
05-10-00
2012.11.29 ATA 65 Page 1
 MSM

Task Number
MP/N (PN) Limit Type Interval Margin
Description/Remarks

ATA 67-ROTORS FLIGHT CONTROL

67-22 YAW CONTROL

67/22/00/000/000/010
Yaw damper
324900M02 (704A44241031) OC
324900M03 (704A44241032)

67-31 MAIN SERVOCONTROLS

67/31/00/000/000/015
Main servocontrol
SC7203 (704A44831148) TBO A 3000 FH XA 0A
SC7203-1 (704A44831163)
// 20 Y X TSM 0A
TSM or Overhaul.

67/31/00/000/000/035
Pipe
A8679-01 (704A34413263) OTL A 16000OPC X A 1600 OPC
1 OPC = 1 rotor start.

67-32 TAIL SERVOCONTROLS

67/32/00/000/000/000
Tail servocontrol
SC7251 (704A44831108) TBO A 3000 FH XA 300 FH
// 20 Y X TSM 180 D
TSM or Overhaul.

End of the Document Unit

AS 332 L2
05-10-00
2012.11.29 ATA 67 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 05-TIME LIMITS/MTCE. CHKS

05-21 PREPARATION FOR INSPECTION

05/21/00/000/000/000
Check before the first flight of the day
MMA 05.21.00.211 A A BFF X 0A
Check.
VC

05/21/00/000/000/010
Turn-Around check
MMA 05.21.00.212 A A TA X 0A
Check.
VC

05/21/00/000/000/020
Check after the last flight of the day
MMA 05.21.00.213 A A ALF X 0A
Check.
GVI

05/21/00/000/000/030
Aircraft preparation in cold weather
MMA 05.21.00.214 A A BFF X 0A
Check.
VC

05/21/00/000/000/040
Aircraft preparation in cold weather
MMA 05.21.00.215 A A ALF X 0A
Check.
GVI

05/21/00/000/000/050
Aircraft preparation in very cold weather
MMA 05.21.00.216 A A BFF X 0A
Check.
VC

05/21/00/000/000/060
Aircraft preparation in very cold weather
MMA 05.21.00.217 A A ALF X 0A
Check.
GVI

AS 332 L2
05-20-00
2013.12.12 ATA 05 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

05/21/00/000/000/070
Optional equipment routine check
MMA 05.21.01.211 A A BFF X 0A
05.21.01.211.001
Check.
VC

05/21/00/000/000/080
Optional equipment routine check
MMA 05.21.01.211 A A TA X 0A
05.21.01.211.002
Check.
VC

05/21/00/000/000/090
Optional equipment routine check
MMA 05.21.01.211 A A ALF X 0A
05.21.01.211.003
Check.
GVI

05-24 MAJOR INSPECTION

05/24/00/000/000/000
Major inspection
MMA 05.24.00.211 A 15 Y X 180 D
Preparation.
DI

05-52 PREPARATION FOR INSPECTION

05/52/00/000/000/000
Preparation of severe climatic conditions inspection
MMA 05.55.00.611

DI

End of the Document Unit

AS 332 L2
05-20-00
2013.12.12 ATA 05 Page 2
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 08-LEVELLING & WEIGHING

08-20 LEVELING-ALIGNMENT
08/20/00/000/000/000
Triangulation and measurements
MMA 08.20.00.221 A 15 Y X 180 D
Check.
DI

08-30 WEIGHING
08/30/00/000/000/000
Aircraft
MMA 08.30.00.221 A 15 Y X 180 D
Weigh.
WGH

End of the Document Unit

AS 332 L2
05-20-00
2012.11.29 ATA 08 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 21-AIR CONDITIONING

21-00 AIR CONDITIONING

21/00/00/000/000/020
Temperature probe
CMM 21.23.97 A 8Y X 180 D
Test.
FT

21-11 COCKPIT AIR GENERATING SYSTEM

21/11/00/000/000/000
Main fan and IFDS
MMA 21.11.00.711 A 9000 FH X 300 FH
21.11.00.711.001 // 15 Y X 180 D
Test.
FT

21/11/00/000/000/020
Rotary distribution unit
MMA 21.11.00.211 A 8Y X 180 D
Check.
DI|TCK

21/11/00/000/000/030
Air intake selector unit
MMA 21.11.00.212 A 8Y X 180 D
Check with removal.
DI

21-12 CABIN AIR GENERATING SYSTEM

21/12/00/000/000/010
Air intake selector unit
MMA 21.12.00.210 A 8Y X 180 D
21.12.00.210.001
PRE MOD 0725494.
Check.
DI

AS 332 L2
05-20-00
2016.07.18 ATA 21 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

21/12/00/000/000/015
Air intake selector unit
MMA 21.12.00.211 A 8Y X 180 D
21.12.00.211.001
POST MOD 0725494.
Check.
DI

21/12/00/000/000/030
Ventilation duct
MMA 21.12.00.212 A 8Y X 180 D
21.12.00.212.001
PRE MOD 0725494.
Check.
DI|FT

21/12/00/000/000/035
Ventilation duct
MMA 21.12.00.213 A 8Y X 180 D
21.12.00.213.001
POST MOD 0725494.
Check.
DI|FT

21/12/00/000/000/040
Ventilated probe
MMA 21.12.00.066 A 1200 FH X 120 FH
POST MOD 0726283
Cleaning.
CLN

21/12/00/422/000/000
Polluted air extractor - Grid
MMA 21.12.00.422 A 750 FH X 75 FH
21.12.00.102.001 // 2Y X 73 D
Check.
DI

21-14 VENTILATION OF THE TRANSFORMER-RECTIFIER

21/14/00/000/000/000
Ventilation duct
MMA 21.14.02.210 A 6Y X 180 D
21.14.02.210.001
Check.
DI

AS 332 L2
05-20-00
2016.07.18 ATA 21 Page 2
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

21-21 COCKPIT AIR DISTRIBUTION SYSTEM

21/21/00/000/000/003
IFDS screens - Fan electric motor
CMM 21.22.95 A 500 FH X 50 FH
AE1708CA0 (704A42130028)
Amendment A.
Replace the brushes.
DS

21/21/00/000/000/008
IFDS screens - Fan electric motor
CMM 21.22.95 A 750 FH X 75 FH
AE1708CA0 (704A42130028)
Amendment B.
Replace the brushes.
DS

21/21/00/000/000/010
Upper ventilation duct
MMA 21.21.00.211 A 8Y X 180 D
21.21.00.211.001
Check.
DI|TCK

21/21/00/000/000/020
Lower ventilation duct
MMA 21.21.00.211 A 8Y X 180 D
21.21.00.211.002
Check.
DI|TCK

21/21/00/000/000/030
Demisting duct
MMA 21.21.00.211 A 8Y X 180 D
21.21.00.211.003
Check.
DI|TCK

21/21/00/000/000/040
Heating duct
MMA 21.21.00.211 A 8Y X 180 D
21.21.00.211.004
Check.
DI|TCK

AS 332 L2
05-20-00
2016.07.18 ATA 21 Page 3
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

21-22 CABIN AIR DISTRIBUTION

21/22/00/000/000/000
Distributor unit
MMA 21.22.00.210 A 6Y X 180 D
21.22.00.210.001
PRE MOD 0725069.
Check.
DI

21/22/00/000/000/010
Distributor unit
MMA 21.22.00.210 A 6Y X 180 D
21.22.00.210.002
POST MOD 0725069.
Check.
DI

21/22/00/000/000/020
Ventilation duct
MMA 21.22.00.210 A 6Y X 180 D
21.22.00.210.004
Check.
DI

21/22/00/000/000/030
Ventilation outlet
MMA 21.22.00.210 A 6Y X 180 D
21.22.00.210.003
Check.
DI

21/22/00/000/000/040
Heating duct outlet
MMA 21.22.00.211 A 6Y X 180 D
21.22.00.211.001
Check.
DI

21/22/00/000/000/050
Heating duct
MMA 21.22.00.211 A 6Y X 180 D
21.22.00.211.002
PRE MOD 0723884.
Check.
DI|TCK

AS 332 L2
05-20-00
2016.07.18 ATA 21 Page 4
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

21/22/00/000/000/060
Heating duct
MMA 21.22.00.211 A 6Y X 180 D
21.22.00.211.003
POST MOD 0723884.
Check.
DI|TCK

21-41 P2 SYSTEM
21/41/00/000/000/000
Thermally-insulated rigid pipes
MMA 21.41.00.211 A 8Y X 180 D
21.41.00.211.001
Check.
DI|TCK|FT

21/41/00/000/000/010
P2 air system valve
CMM 21.49.88 A 8Y X 180 D
Clean and check.
DI|CLN

21-50 OPT - AIR CONDITIONING SYSTEM

21/50/02/000/000/020
SECAN HP 10 kVA air conditioning unit
MMA 21.50.02.211 A 750 FH X 75 FH
21.50.02.211.001 // 2Y X 73 D
21.50.02.211.002
Check.
DI|FT

21/50/02/000/000/030
SECAN HP 10 kVA air conditioning unit
MMA 21.50.02.211 A 150 FH X 15 FH
21.50.02.211.003
PRE MOD 0726686
Check the attachment fittings.
DI

AS 332 L2
05-20-00
2016.07.18 ATA 21 Page 5
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

21/50/02/000/000/040
SECAN HP 10 kVA air conditioning unit
MMA 21.50.02.211 A 750 FH X 75 FH
21.50.02.211.003 // 2Y X 73 D
POST MOD 0726686
Check the attachment fittings.
DI

21/50/02/000/000/050
SECAN HP air conditioning unit assembly
MMA 21.50.02.642 A 4Y X 146 D
Cooling system servicing.
DRN|FT

21/50/02/000/000/060
SECAN HP air conditioning system
MMA 21.50.02.211 A 1Y X 36 D
21.50.02.211.005
Repackaging and checking for proper wintering.
Perform task if air conditioning unit is removed since more one year.
DI

21/50/02/520/000/100
SECAN HP 10 kVA air conditioning unit - Fan
CMM 21.51.95 A 9000 FH X 300 FH
46-90262 (-)
Maintenance.
Remove the fan and return it to the manufacture or send it to an approved repair station for bearings replacement.

21/50/02/520/000/200
SECAN HP 10 kVA air conditioning unit - Fan
CMM 21.51.98 A 9000 FH X 300 FH
46-90330 (-)
46-90330-1 (-)
Maintenance.
Remove the fan and return it to the manufacture or send it to an approved repair station for bearings replacement.

21-51 OPT - COCKPIT AIR CONDITIONING SYSTEM

21/51/01/000/000/030
SECAN HP 7 kVA air conditioning unit
MMA 21.51.01.211 A 7500 FH X 300 FH
21.51.01.211.003
Check.
DI

AS 332 L2
05-20-00
2016.07.18 ATA 21 Page 6
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

21/51/01/000/000/040
SECAN HP 7 kVA air conditioning unit
MMA 21.51.01.211 A 750 FH X 75 FH
21.51.01.211.001 // 6M X 18 D
Check.
DI|FT

21/51/01/000/000/050
SECAN 7 kVA air conditioning unit
MMA 21.51.01.722 A 1M X 3D
21.51.01.722.001
Starting air conditioning.
Perform task if air conditioning is not used since one month.
FT

21/51/02/000/000/050
SECAN 10 kVA air conditioning unit
MMA 21.51.02.722 A 1M X 3D
Starting air conditioning.
Perform task if air conditioning is not used since one month.
FT

21/51/02/000/000/055
Cockpit evaporator
CMM 21.51.98 A 9000 FH X 300 FH
MMA 21.51.02.052
11-91330 (704A42110052)
Cleaning with removal.
CLN

21/51/02/000/000/080
Cockpit evaporator
MMA 21.51.02.101 A 8Y X 180 D
11-91330 (704A42110052)
Cleaning without removal.
CLN

21-52 OPT - CABIN AIR CONDITIONING SYSTEM

21/52/01/000/000/010
SECAN HP 7 kVA air conditioning unit
MMA 21.52.01.212 A 750 FH X 75 FH
21.52.01.212.001 // 2Y X 73 D
Check.
DI|FT

AS 332 L2
05-20-00
2016.07.18 ATA 21 Page 7
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

21/52/01/000/000/020
SECAN 7 kVA air conditioning unit
MMA 21.52.01.722 A 1M X 3D
21.52.01.722.001
Starting air conditioning.
Perfom task if air conditioning is not used since one month.
FT

21/52/02/000/000/020
SECAN 10 kVA air conditioning unit
MMA 21.52.02.722 A 1M X 3D
Starting air conditioning.
Perform task if air conditioning is not used since one month.
FT

21/52/02/000/000/055
Cabin evaporator
CMM 21.51.98 A 9000 FH X 300 FH
MMA 21.52.02.052
11-93330 (704A42110053)
Cleaning with removal.
CLN

21-60 HEATING, VENTILATION CONTROLS AND INDICATORS

21/60/00/000/000/000
Air conditioning system
MMA 21.60.00.721 A 6Y X 180 D
Perform tests on the system.
FT

21/60/00/000/000/010
Air conditioning system
MMA 21.60.00.721 A 750 FH X 75 FH
21.60.00.721.008 // 2Y X 73 D
POST MOD 0725858.
Stand-by fan functional test.
FT

End of the Document Unit

AS 332 L2
05-20-00
2016.07.18 ATA 21 Page 8
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 22-AUTO FLIGHT

22-31 AUTOPILOT HYDRAULIC UNIT

22/31/00/000/000/030
Autopilot hydraulic system
MMA 22.31.00.221 A 2Y X 73 D
22.31.00.221.001
Check.
GVI

22/31/00/000/000/035
Autopilot hydraulic system
MMA 22.31.00.221 A 75 FH X 7 FH
22.31.00.221.002
Check.
GVI

22-40 CONTROL AND MONITORING

22/40/00/000/000/000
Collective pitch control lever - Disengagement
MMA 22.40.00.752 A 750 FH X 75 FH
22.40.00.752.001
POST MOD 0726266.
Test.
FT

End of the Document Unit

AS 332 L2
05-20-00
2012.11.29 ATA 22 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 23-COMMUNICATIONS

23-71 OPT - VOICE RECORDER

23/71/00/000/000/000
CV/FDR immersion probe without EUROHUMS and EUROARMS option
MMA 23.71.00.721 A 2Y X 73 D
23.71.00.721.001
Test for CV/FDR recorder MP/N D51521-010-112.
FT

23/71/00/000/000/005
CV/FDR immersion probe without EUROHUMS and EUROARMS option
MMA 23.71.00.721 A 2Y X 73 D
23.71.00.721.002
Test for CV/FDR recorders MP/N 980-6021-032 and 980-6021-066.
FT

23/71/00/000/000/010
CV/FDR recorder without EUROHUMS and EUROARMS option
CMM 31.32.90 A 6Y X 180 D
D51521-010-112 (704A45381021)
Check of crash protection feature.
FT

23/71/00/000/000/020
CV/FDR recorder without EUROHUMS and EUROARMS option
MMA 23.71.00.751 A 1Y X 36 D
980-6021-032 (704A45381025)
980-6021-066 (-)
D51521-010-112 (704A45381021)
Check the recording.
FT

23/71/00/000/000/030
CV/FDR recorder without EUROHUMS and EUROARMS option
MMA 23.71.00.722 A 6M X 18 D
23.71.00.722.001
980-6021-032 (704A45381025)
980-6021-066 (-)
D51521-010-112 (704A45381021)
Check of audio erase function.
FT

AS 332 L2
05-20-00
2015.01.15 ATA 23 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

23/71/00/000/000/040
CVR installation without EUROHUMS and EUROARMS option
MMA 23.71.00.741 A 6M X 18 D
23.71.00.741.002
980-6021-032 (704A45381025)
980-6021-066 (-)
Test of the pilot, copilot and cockpit area microphones.
FT

23/71/00/000/000/050
CVR installation without EUROHUMS and EUROARMS option
MMA 23.71.00.742 A 6M X 18 D
23.71.00.742.003
D51521-010-112 (704A45381021)
Test of the pilot, copilot and cockpit area microphones.
FT

23/71/00/000/000/060
SSCVFDR without EUROHUMS and EUROARMS option
CMM 31.32.90 A 6Y X 180 D
Penny and Giles.
Test.
FT

23/71/00/000/000/070
CVR and FDR systems without EUROHUMS and EUROARMS option
CMM 31.32.90 A 2Y X 73 D
Penny and Giles.
Test.
FT

23/71/01/000/000/000
CVR immersion probe
MMA 23.71.01.721 A 750 FH X 75 FH
23.71.01.721.004 // 2Y X 73 D
Test.
FT

23/71/04/000/000/000
CV/FDR immersion probe
MMA 23.71.04.721 A 2Y X 73 D
23.71.04.721.003
Test.
FT

End of the Document Unit

AS 332 L2
05-20-00
2015.01.15 ATA 23 Page 2
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 24-ELECTRICAL POWER

24-00 ELECTRICAL POWER

24/00/00/000/000/000
Electric power generating system
MMA 24.00.00.211 A 750 FH X 75 FH
Visual check.
GVI

24/00/00/000/000/010
Electric power generating system
MMA 24.00.00.211 A 750 FH X 75 FH
24.00.00.211.001 // 2Y X 73 D
Check of alternators.
GVI

24/00/00/000/000/020
Electrical bonding
MMA 24.00.00.612 A 15 Y X 180 D
Check.
DI

24/00/00/000/000/025
Electrical bonding
MMA 24.00.00.612 A 7500 FH X 300 FH
24.00.00.612.029 // 15 Y X 180 D
Check.
DI

24/00/00/000/000/030
Electrical bonding of optional equipments
MMA 24.00.00.613 A 15 Y X 180 D
Check.
DI

24-20 AC POWER SYSTEM

24/20/00/000/000/000
Electrical master box
MMA 24.20.00.711 A 9000 FH X 300 FH
// 15 Y X 180 D
Test.
FT

AS 332 L2
05-20-00
2015.10.29 ATA 24 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

24/20/00/000/000/003
Electrical master box
MMA 24.20.00.711 A 750 FH X 75 FH
24.20.00.711.003
PRE MOD 0726130.
Test.
FT

24/20/00/000/000/006
Electrical master box
MMA 24.20.00.711 A 750 FH X 75 FH
24.20.00.711.002
24.20.00.711.004
POST MOD 0726130.
Test.
FT

24/20/00/000/000/010
Alternator AC power system
MMA 24.20.00.712 A 9000 FH X 300 FH
// 15 Y X 180 D
Test.
GR

24-23 OPT - EMERGENCY HYDROELECTRIC POWER

24/23/01/000/000/025
Transformer-rectifier (EAS)
MMA 24.23.01.061 A 3600 FH X 300 FH
// 6Y X 180 D
684-1009-200 (704A46230004)
Removal for return to an approved workshop for cleaning, checking and testing.
DI

24/23/01/000/000/030
Power system, emergency hydro-electrical
MMA 24.23.01.611 A 750 FH X 75 FH
24.23.01.611.001 // 2Y X 73 D
Check.
DI

24/23/01/000/000/040
Power system, emergency hydro-electrical
MMA 24.23.01.751 A 2250 FH X 225 FH
24.23.01.751.001
Internal check.
FT

AS 332 L2
05-20-00
2015.10.29 ATA 24 Page 2
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

24/23/01/000/000/050
Power system, emergency hydro-electrical
MMA 24.23.01.751 A 2250 FH X 225 FH
24.23.01.751.002
Electrovalves control check.
FT

24/23/01/000/000/060
Power system, emergency hydro-electrical
MMA 24.23.01.721 A 9000 FH X 300 FH
// 15 Y X 180 D
Functional test.
FT

24/23/01/000/000/065
Emergency hydro-electrical power system
MMA 24.23.01.212 A 75 FH X 7 FH
24.23.01.212.001
Relay 16XK check.
FT

24/23/01/000/000/070
Temperature probe
MMA 60.00.00.222 A 6Y X 180 D
60.00.00.222.002
Calibration check.
DRN|FT

24-30 DC POWER SYSTEM

24/30/00/000/000/000
DC power system
MMA 24.30.00.721 A 9000 FH X 300 FH
// 15 Y X 180 D
Test.
FT

24/30/00/000/000/010
DC power system
MMA 24.30.00.721 A 1000 FH X 100 FH
24.30.00.721.005
Test.
FT

AS 332 L2
05-20-00
2015.10.29 ATA 24 Page 3
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

24-32 MAIN BATTERY

24/32/00/000/000/010
43-Ah battery
MMA 24.32.00.111 A 2Y X 73 D
24.32.00.111.001
Battery compartment cleaning.
CLN

24/32/00/000/000/020
43-Ah battery
CMM 24.32.96 A 6M X 18 D
CHECK § 2.A
40308-1 (704A46130041)
Check.
DI

24/32/00/000/000/030
43-Ah battery
CMM 24.32.96 A 1Y X 36 D
CHECK § 2.B
40308-1 (704A46130041)
Check.
DI

24/32/00/000/000/035
43-Ah battery
CMM 24.32.95 A 2Y X 73 D
CHECK § 3
40308-5 (704A46130045)
Detailed inspection.
DI

24/32/00/000/000/040
43-Ah battery
CMM 24.32.95 A 6M X 18 D
CHECK § 2.A
40308-5 (704A46130045)
Check.
DI

AS 332 L2
05-20-00
2015.10.29 ATA 24 Page 4
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

24/32/00/000/000/050
43-Ah battery
CMM 24.32.95 A 1Y X 36 D
CHECK § 2.B
40308-5 (704A46130045)
Check.
DI

24/32/00/000/000/060
43-Ah battery
CMM 24.32.96 A 2Y X 73 D
CHECK § 3
40308-1 (704A46130041)
Detailed inspection.
DI

24-33 STANDBY BATTERY

24/33/00/000/000/010
Emergency battery
MMA 24.33.00.721 A 750 FH X 75 FH
24.33.00.721.001 // 2Y X 73 D
BTS14A (704A46130054)
BTS89A (704A46130042)
EE0005-01 (704A46130026)
EE0005-011 (704A46130031)
EE0005-0111 (704A46130032)
EE0177 (704A46130042)
Charge test.
FT

24/33/00/000/000/020
Emergency battery
MMA 24.33.00.721 A 2Y X 73 D
24.33.00.721.002
BTS14A (704A46130054)
BTS89A (704A46130042)
EE0005-01 (704A46130026)
EE0005-011 (704A46130031)
EE0005-0111 (704A46130032)
EE0177 (704A46130042)
Switching tests.
FT

AS 332 L2
05-20-00
2015.10.29 ATA 24 Page 5
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

24/33/00/000/000/030
Emergency battery
MMA 24.33.00.611 A 750 FH X 75 FH
24.33.00.611.008 A 2Y X 73 D
BTS14A (704A46130054)
BTS89A (704A46130042)
EE0005-01 (704A46130026)
EE0005-011 (704A46130031)
EE0005-0111 (704A46130032)
EE0177 (704A46130042)
Capacity measurement.
DI

24-34 OPT - COLD WEATHER STARTING BATTERY

24/34/00/000/000/000
43-Ah battery
MMA 24.34.01.721 A 750 FH X 75 FH
40308-5 (704A46130045)
Functional test.
FT

24-92 RELAY ON PLATE

24/92/01/000/000/000
Electrical power supply of warning panel 10WW
MMA 24.92.01.221 A 9000 FH X 300 FH
// 15 Y X 180 D
Replacement of the relay 11WW and check of the dual power supply system.
DI|FT

End of the Document Unit

AS 332 L2
05-20-00
2015.10.29 ATA 24 Page 6
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 25-EQUIPMENTS/FURNISHINGS

25-00 EQUIPMENT/FURNISHINGS
25/00/00/000/000/005
Belt straps - Harness - Medical installation straps
MMA 25.00.00.211 A 1Y X 36 D
MMA 25.63.03.211
25.63.03.211.002
Check.
Operation also to be carried out after each installation of the seat or of the harness or of the straps.
CLN|GVI

25/00/00/000/000/007
Belt straps - Harness - Medical installation straps
MMA 25.00.00.721 A 1Y X 36 D
Functional test.
Operation also to be carried out after each installation of the seat or of the harness or of the straps.
FT

25/00/00/000/000/080
Harness installation - Harness
CMM 25.20.84 A 1Y X 0A
60081443E (704A41816099)
Inspection and functional test.
VC|FT

25/00/00/000/000/090
Harness installation - Lanyard connector
CMM 25.20.84 A 1Y X 0A
60081629 (704A41816097)
Inspection and functional test.
VC|FT

25/00/00/000/000/100
Harness installation - Adjustable lanyard
CMM 25.20.84 A 1Y X 0A
60081627 (704A41816098)
Inspection and functional test.
VC|FT

25/00/00/000/000/110
Harness installation - Quick release system
CMM 25.20.83 A 1Y X 0A
80049010 (704A41816095)
Inspection and functional test.
VC|FT

AS 332 L2
05-20-00
2016.07.18 ATA 25 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

25-11 OPT- STANDARD COCKPIT SEATS

25/11/01/211/000/000
Cockpit seat
MMA 25.11.01.211 A 4500 FH X 300 FH
// 4Y X 146 D
Check.
DI

25/11/02/000/000/000
Crashworthy pilot seat
MMA 25.11.02.211 A 4500 FH X 300 FH
// 4Y X 146 D
Check.
DI

25/11/03/211/000/010
Leader-type pilot seat
MMA 25.11.03.211 A 4500 FH X 300 FH
// 4Y X 146 D
Check.
DI

25-12 THIRD CREWMEMBER SEAT

25/12/01/211/000/000
Third crewmember seat
MMA 25.12.01.211 A 4500 FH X 300 FH
// 4Y X 146 D
Check.
DI

25/12/02/000/000/000
Crashworthy third crewmember seat
MMA 25.12.02.211 A 4500 FH X 300 FH
// 4Y X 146 D
Check.
DI

25/12/03/000/000/000
Steward's seat
MMA 25.12.03.211 A 4500 FH X 300 FH
// 4Y X 146 D
Check.
DI

AS 332 L2
05-20-00
2016.07.18 ATA 25 Page 2
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

25-13 PARTITION CURTAIN

25/13/01/211/000/000
Partition curtain
MMA 25.13.01.211 A 4500 FH X 300 FH
// 4Y X 146 D
Check.
GVI

25-21 FITTING OUT-COMFORT

25/21/03/211/000/000
Passenger seats
CMM 25.12.08 A 4500 FH X 300 FH
25.12.08.220.004.A01 // 6Y X 180 D
25.12.08.220.005.A01
EXC. § 4
SICMA 179.
Check with removal.
DI

25/21/03/211/000/010
Passenger seats
CMM 25.12.08 A 4500 FH X 300 FH
25.12.08.220.004.A01 // 3Y X 109 D
25.12.08.220.005.A01
EXC. § 4
Tropical and damp atmosphere
Salt-laden atmosphere
SICMA 179.
Check with removal.
DI

25-22 CRASHWORTHY TROOP TRANSPORT SEAT

25/22/01/211/000/000
Crashworthy troop transport seat
MMA 25.22.01.211 A 4500 FH X 300 FH
// 6Y X 180 D
Check.
DI

AS 332 L2
05-20-00
2016.07.18 ATA 25 Page 3
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

25-23 STANDARD TROOP TRANSPORT SEAT

25/23/02/211/000/000
Standard troop transport seat
MMA 25.23.02.211 A 4500 FH X 300 FH
// 6Y X 180 D
Check.
DI

25-27 OPT- WINDOW CURTAIN

25/27/01/721/000/000
Electrically-controlled curtains
MMA 25.27.01.721 A 75 FH X 7 FH
Functional test.
FT

25-31 OPT - SLING

25/31/00/000/000/010
Mechanical load release - Control unit
MMA 25.31.02.221 A 3Y X 109 D
MMA 25.31.03.221
MMA 25.31.04.221
Check and greasing.
DI|LUB

25/31/00/000/000/020
Mechanical load release - Control unit
MMA 25.31.02.221 A 30 M X 90 D
MMA 25.31.03.221
MMA 25.31.04.221
Salt-laden atmosphere
Check and greasing.
DI|LUB

25/31/02/000/000/010
3-t sling - Weighing system
MMA 25.31.02.821 A 750 FH X 75 FH
// 2Y X 73 D
Calibration.
RIG

AS 332 L2
05-20-00
2016.07.18 ATA 25 Page 4
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

25/31/02/000/000/040
3-t sling
MMA 25.31.02.211 A 2Y X 73 D
// 500 SC X 50 SC
Visual check.
DI|FT

25/31/02/000/000/050
3-t sling - Load release
MMA 25.31.02.721 A 7D X 0A
25.31.02.721.001
25.31.02.721.002
Functional test.
FT

25/31/02/000/000/060
3-t sling - Load release
CMM 25.89.92 A 2Y X 73 D
§ INSPECTION // 500 SC X 50 SC
AS21-7-2 (704A41811031)
AS21-7-3 (704A41811032)
Greasing.
LUB

25/31/03/000/000/010
3.8-t sling - Weighing system
MMA 25.31.03.821 A 750 FH X 75 FH
// 2Y X 73 D
Calibration.
RIG

25/31/03/000/000/040
3.8-t sling
MMA 25.31.03.211 A 2Y X 73 D
// 500 SC X 50 SC
Visual check.
DI|FT

25/31/03/000/000/050
3.8-t sling - Load release
MMA 25.31.03.721 A 7D X 0A
25.31.03.721.001
25.31.03.721.002
Functional test.
FT

AS 332 L2
05-20-00
2016.07.18 ATA 25 Page 5
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

25/31/04/000/000/010
5-t sling - Weighing system
MMA 25.31.04.821 A 750 FH X 75 FH
// 2Y X 73 D
Calibration.
RIG

25/31/04/000/000/020
5-t sling - Load release
MMA 25.31.04.721 A 7D X 0A
25.31.04.721.001
25.31.04.721.002
Functional test.
FT

25/31/04/000/000/030
5-t sling
MMA 25.31.04.211 A 2Y X 73 D
// 500 SC X 50 SC
Visual check.
DI|FT

25/31/04/000/000/040
5-t sling
MMA 25.31.04.223 A 750 FH X 75 FH
25.31.04.223.001 // 2Y X 73 D
Special monitoring.
VC

25/31/04/000/000/050
Rotating release unit
CMM 25.81.99 A 2Y X 73 D
§ INSPECTION // 500 SC X 50 SC
AS21-10 (704A41811033)
Greasing.
LUB

25-52 BAGGAGE COMPARTMENT

25/52/01/000/000/000
Baggage compartment paneling
MMA 25.52.01.211 A 3750 FH X 300 FH
// 8Y X 180 D
Check.
GVI

AS 332 L2
05-20-00
2016.07.18 ATA 25 Page 6
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

25/52/02/000/000/000
OPT - Enlarged baggage compartment trimming panels
MMA 25.52.02.211 A 3750 FH X 300 FH
// 8Y X 180 D
Check.
GVI

25-62 OPT - EMERGENCY FLOATATION GEAR

25/62/01/000/000/090
Emergency floatation gear - Floats
CMM 25.69.23 PO A 5Y X 180 D
§5 & 8Y X 180 D
CMM 25.69.30
§5
Proof-test and perform detailed check.
Interval starting from the date of manufacture.
NPT|GVI

25/62/01/000/000/110
Cylinder kevlar and fiber glass
A 3Y X 0A
// 1 OPCX 0A
212029-0 (704A42693002)
212030-0 (704A42693003)
212030-1 (704A42693004)
Proof pressure check.
TSM or the last proof test.
1 OPC = 1 utilization (ditching or untimely percussion of the inflation cylinder).
To be carried out by the manufacturer or by an approved repair station.
NPT

25/62/01/000/000/130
Cylinder carbon
A 5Y X 0A
// 1 OPCX 0A
212029-1 (704A42693017)
212030-2 (704A42693008)
Proof pressure check.
TSM or the last proof test.
1 OPC = 1 utilization (ditching or untimely percussion of the inflation cylinder).
To be carried out by the manufacturer or by an approved repair station.
NPT

AS 332 L2
05-20-00
2016.07.18 ATA 25 Page 7
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

25/62/01/000/000/150
Emergency floatation gear - Cylinders
CMM 25.69.49 A 1Y X 36 D
CMM 25.69.15 //
MMA 25.62.01.611
Interval between 2 cylinder weighing or checking operations.
Weighing or pressure check after removal of cylinders from store.
DI

25/62/01/000/000/160
Emergency floatation gear - Inflation head frangible disk
MMA 25.62.01.721 A 1Y X 36 D
25.62.01.721.002
Time of installation on the bottle.
Check.
DI

25/62/01/000/000/170
Emergency floatation gear - Cradles
MMA 25.62.01.063 A 5Y X 180 D
MMA 25.62.01.064
Tropical and damp atmosphere
Check.
DI

25/62/01/000/000/180
Emergency floatation gear - Cradles
MMA 25.62.01.063 A 10 Y X 180 D
MMA 25.62.01.064
Normal climatic conditions
Check.
DI

25/62/01/000/000/200
Emergency floatation gear
CMM 25.69.30 A 1Y X 36 D
INSPECTION/CHECK
§4
Servicing.
DI

25/62/01/000/000/240
Emergency floatation gear
MMA 25.62.01.211 A 2Y X 73 D
25.62.01.211.001
25.62.01.211.005
Check.
DI

AS 332 L2
05-20-00
2016.07.18 ATA 25 Page 8
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

25/62/01/000/000/250
Emergency floatation gear
MMA 25.62.01.721 A 1500 FH X 150 FH
Test.
FT

25/62/01/000/000/260
Emergency floatation gear - Rear cradle support
MMA 25.62.01.065 A 10 Y X 180 D
MMA 25.62.01.211
25.62.01.211.004
Normal climatic conditions
Check.
DI

25/62/01/000/000/270
Collective pitch lever - Percussion control pushbutton
MMA 25.62.01.066 A 15 Y X 180 D
Maintenance.
Replace the percussion control pushbutton.

25/62/01/000/000/280
Collective pitch lever - Percussion control pushbutton
MMA 25.62.01.212 A 1Y X 36 D
Check.
DI

25/62/01/000/000/300
Emergency floatation gear - Rear cradle support
MMA 25.62.01.065 A 5Y X 180 D
MMA 25.62.01.211
25.62.01.211.004
Tropical and damp atmosphere
Check.
DI

25/62/01/000/000/310
Immersion probe
MMA 25.62.01.722 A 2Y X 73 D
Functional test.
FT

AS 332 L2
05-20-00
2016.07.18 ATA 25 Page 9
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

25-64 OPT - HOIST

25/64/01/000/000/120
Hydraulic hoist 75 m / 600 lbs, variable speed
CMM 25.64.98 A 6M X 0A
// 50 HC X 0A
Greasing of the winding screw.
Check of:
- the cable,
- the cable extracting and reeling in,
- the hook assembly,
- the hook compression function,
- Functional check of the slow-down (s) and the electrical End-of-Travels.
LUB|DI

25/64/01/000/000/150
Hydraulic hoist 75 m / 600 lbs, variable speed
CMM 25.64.98 A 1Y X 0A
// 500 HC X 0A
Check of:
- drum oil level,
- the mechanic brake,
- the condition of the micro-switches box for hoist without amendment 23.
DI

25/64/01/000/000/160
Hydraulic hoist 75 m / 600 lbs, variable speed
CMM 25.64.98 A 2Y X 0A
// 1000 HC X 0A
Drum oil drainage.
DRN

25/64/02/000/000/040
Hydraulic hoist - Cable (all versions)

Salt-laden atmosphere
After each mission (with or without hoisting), cleaning following CMM concerned.
CLN

25/64/02/000/000/100
Collective pitch lever - Percussion control pushbutton
MMA 25.64.05.065 A 15 Y X 180 D
Maintenance.
Replace the percussion control pushbutton.

AS 332 L2
05-20-00
2016.07.18 ATA 25 Page 10
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

25/64/03/000/000/040
Electrical hoist 28 VDC 40 m / 300 lbs, fixed speed - Electrical unit
CMM 25.64.97 A 100 HC X 0A
Check of the electric resistors of the box.
DI

25/64/03/000/000/050
Electrical hoist 28 VDC 40 m / 300 lbs, fixed speed - Guiding fork
CMM 25.64.97 A 750 HC X 0A
Removal and replacement.
DS

25/64/03/000/000/160
Hoist installation
MMA 25.64.05.723 A 1500 FH X 150 FH
// 4Y X 146 D
Jettison system functional tests.
FT

25/64/03/000/000/170
Electrical hoist 28 VDC 40 m / 300 lbs, fixed speed
CMM 25.64.97 A 6M X 0A
// 50 HC X 0A
Greasing of:
- the mechanical brake,
- the winding screw.
Check of:
- the cable,
- the efficiency of the return spring of the latch of the mechanical End-of-Travel,
- the cable extracting and reeling in,
- the hook assembly,
- Functional check of the electrical End-of Travels.
LUB|DI

25/64/04/000/000/000
Hoist installation
MMA 25.64.05.211 A 1500 FH X 150 FH
EXC. // 4Y X 146 D
25.64.05.211.003
Check.
DI

25/64/04/000/000/010
Hoist installation - Harness of the pyrotechnic cartridge
MMA 25.64.05.211 A 6M X 18 D
25.64.05.211.003 // 50 HC X 5 HC
Check.
DI

AS 332 L2
05-20-00
2016.07.18 ATA 25 Page 11
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

25/64/05/000/000/010
Electrical hoist - Transformer-rectifier
MMA 25.64.05.064 A 3600 FH X 300 FH
// 6Y X 180 D
684-1009-200 (704A46230004)
Removal for return to an approved workshop for cleaning, checking and testing.
DI|CLN|FT

25/64/06/000/000/120
Electrical hoist 28 VDC 90 m / 600 lbs, variable speed
CMM 25.00.17.1 A 1M X 0A
// 100 HC X 0A
Verification of rescue hoist cable: dimensional check (section 500 (check)).
Rescue hoist cable: cleaning and lubrication (section 500 (check), section 400 (cleaning)).
Limit switch assembly: test (section 100 (Testing and Fault isolation)).
Lubrication of level wind screw and ball spline shaft if necessary (section 600 (Repair)).
DI

25/64/06/000/000/130
Electrical hoist 28 VDC 90 m / 600 lbs, variable speed
CMM 25.00.17.1 A 6M X 0A
Check of cable hook assembly: check (section 500 (check)) + condition of the bearing and the spring pin of the nut.
Hook absorbing cylinder: check (section 700 (assembly)): Dimension check of the
compression of the absorbing energy.
DI

25/64/06/000/000/140
Electrical hoist 28 VDC 90 m / 600 lbs, variable speed
CMM 25.00.17.1 A 1Y X 0A
Hoist assembly drain and replace gearbox lubrification oil (section 600 (Repair)).
DRN

25-66 OPT - EMERGENCY EQUIPMENTS

25/66/01/000/000/040
Cylinder
CMM 25.60.96 A 1Y X 36 D
Interval between 2 weighing operations or pressure checks.
WGH

25/66/01/000/000/070
Life raft installation assembly
CMM 25.61.00 A 6M X 18 D
§3
PRE MOD 0725749.
Visual check.
VC

AS 332 L2
05-20-00
2016.07.18 ATA 25 Page 12
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

25/66/01/000/000/071
Life raft installation assembly
MMA 25.66.01.212 A 1Y X 36 D
Visual check.
VC

25/66/01/000/000/075
Life raft installation assembly - Container
CMM 25.61.00 A 6000 FH X 300 FH
§5
PRE MOD 0725749.
Check.
DI

25/66/01/000/000/080
Life raft
MMA 25.66.01.211 A 1Y X 36 D
Check of the right and left life raft release control system.
DI

25/66/01/000/000/090
Life raft
MMA 25.66.01.213 A 4Y X 146 D
PRE MOD 0726590
Check left and right guide pulley.
DI

25/66/01/000/000/100
Life raft
MMA 25.66.01.821 A 1Y X 36 D
25.66.01.721.001
Percussion control test.
FT

25/66/02/000/000/060
UHF/VHF transmitter
CMM 25.65.98 A 1M X 3D
§ 4.B
BCAL CPT 606.
Test.
FT

AS 332 L2
05-20-00
2016.07.18 ATA 25 Page 13
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

25/66/02/000/000/070
Emergency locator transmitter assy
CMM 25.65.98 A 6M X 18 D
§ 4.A
BCAL CPT 606.
System check on the ground.
FT

25/66/02/000/000/080
Radar receiver
CMM 25.65.98 A 1Y X 36 D
§ 4.C
BCAL CPT 606.
Test.
FT

25/66/02/000/000/090
Deployment mechanism
CMM 25.65.98 A 1Y X 36 D
PAGE 501, 502,
PAGE 503, 504
BCAL CPT 606.
Check with removal.
DI

25/66/03/000/000/000
Battery
MMA 25.66.16.741 A 6M X 18 D
CPI 503.
Self-test.
FT

25/66/03/000/000/040
Emergency locator transmitter
MMA 25.66.16.211 A 750 FH X 75 FH
// 2Y X 73 D
CPI 503.
Check.
GVI

25/66/04/000/000/010
Anchor sea
MMA 25.66.04.211 A 1Y X 36 D
Check.
GVI

AS 332 L2
05-20-00
2016.07.18 ATA 25 Page 14
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

25/66/05/000/000/010
Battery
CMM 25.60.03 A 6M X 18 D
LEIGH CPI 113.
Check the battery charge.
DI

25/66/05/000/000/040
Crash position indicator
MMA 25.66.05.211 A 750 FH X 75 FH
LEIGH CPI 113.
Check and inspect.
DI

25/66/05/000/000/050
Ejection system ARU18
CMM 25.60.03 A 1Y X 36 D
LEIGH CPI 113.
Check, clean and lubricate.
DI|CLN|LUB

25/66/08/000/000/010
Emergency locator transmitter
MMA 25.66.08.211 A 750 FH X 75 FH
// 2Y X 73 D
JOLLIET JE2/JE2 NG.
Check.
DI

25/66/08/000/000/020
Emergency locator transmitter
MMA 25.66.08.721 A 6M X 18 D
JOLLIET JE2/JE2 NG.
Functional test.
FT

25/66/09/000/000/010
Emergency locator transmitter
CMM 25.66.97 A 1Y X 36 D
§ 5.2/5.3
DUKANE DK100.
Cleaning and check.
CLN|DI

AS 332 L2
05-20-00
2016.07.18 ATA 25 Page 15
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

25/66/10/000/000/010
Emergency locator transmitter
MMA 25.66.12.721 A 6M X 18 D
ELT96A2560000000 (704A45737043)
SOCATA.
Emergency Locator Transmitter self-test (perform 3 consecutive sequences).
FT

25/66/10/000/000/020
Emergency locator transmitter
MMA 25.66.12.211 A 750 FH X 75 FH
// 2Y X 73 D
ELT96A2560000000 (704A45737043)
SOCATA.
Check.
DI

25/66/11/000/000/060
UHF/VHF transmitter
CMM 25.60.02 A 1M X 3D
§ 4.B
BCAL CPT 609.
Test.
FT

25/66/11/000/000/070
Emergency locator transmitter assy
CMM 25.60.02 A 6M X 18 D
§ 4.A
BCAL CPT 609.
System check on the ground.
FT

25/66/11/000/000/080
Radar receiver
CMM 25.60.02 A 1Y X 36 D
§ 4.C
BCAL CPT 609.
Test.
FT

25/66/11/000/000/090
Deployment mechanism
CMM 25.60.02 A 1Y X 36 D
BCAL CPT 609.
Check.
DI

AS 332 L2
05-20-00
2016.07.18 ATA 25 Page 16
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

25/66/11/000/000/100
Satellite UHF transmitter
CMM 25.60.03 A 1Y X 0A
PAGE 104 § 3
BCAL CPT 609.
Transmission test using test/set programmer.
FT

25/66/11/000/000/110
Emergency locator transmitter
MMA 25.66.14.211 A 750 FH X 75 FH
// 2Y X 73 D
BCAL CPT 609.
Check.
DI

25/66/12/000/000/010
Emergency locator transmitter
CMM 25.66.97 A 1Y X 36 D
§ 6.2, 6.3
DUKANE DK120.
Cleaning and check.
CLN|FT

25/66/13/000/000/020
Emergency locator transmitter
CMM 25.60.07 A 1Y X 36 D
DATASONIC ELP 362D.
Cleaning and check.
CLN|FT

25/66/15/062/000/020
Emergency locator transmitter
MMA 25.66.15.721 A 1M X 3D
S1820502-02 (-)
S1821502-02 (704A45737051)
KANNAD 406AF/AP.
Self-test.
FT

AS 332 L2
05-20-00
2016.07.18 ATA 25 Page 17
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

25/66/15/062/000/030
Emergency locator transmitter
MMA 25.66.15.211 A 750 FH X 75 FH
// 2Y X 73 D
S1820502-02 (-)
S1821502-02 (704A45737051)
KANNAD 406AF/AP.
System check.
DI

25/66/16/000/000/000
Portable emergency locator transmitter
CMM 25.56.97 A 1Y X 0A
500-12 series (-)
H.R. SMITH 500.
Check and test.
GVI|FT

25-67 OPT - CABLE-CUTTER

25/67/01/000/000/000
Cable-cutter
MMA 25.67.01.211 A 750 FH X 75 FH
Installation check.
DI

25-68 OPT - ROPING INSTALLATION

25/68/00/000/000/010
Hoist arm assembly - Parts fixed and removable
MMA 25.33.01.211 A 750 FH X 75 FH
// 2Y X 73 D
AS29-025-02 (-)
AS29-05-02 (704A41815092)
AS29-13 (-)
AS29-14 (-)
AS29-15 (-)
AS29-20 (-)
AS29-21 (704A41815102)
AS29-24 (-)
AS29-25 (-)
AS29-26 (704A41815123)
AS29-27 (704A41815122)
Detailed check.
DI

AS 332 L2
05-20-00
2016.07.18 ATA 25 Page 18
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

End of the Document Unit

AS 332 L2
05-20-00
2016.07.18 ATA 25 Page 19
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 26-FIRE PROTECTION

26-11 ENGINE FIRE DETECTION SYSTEM

26/11/00/000/000/000
Engine fire detection system
MMA 26.11.00.711 A 6Y X 180 D
26.11.00.711.001
Test the engine 1 and 2 systems using the aircraft power systems.
FT

26/11/00/000/000/005
Engine fire detection system
MMA 26.11.00.711 A 6Y X 180 D
26.11.00.711.002
Test the system tripping thresholds.
FT

26/11/00/000/000/010
Engine fire detection system
MMA 26.11.00.711 A 750 FH X 75 FH
26.11.00.711.003
Test of engine 1 and 2 systems.
FT

26-12 CARGO BAY FIRE DETECTION

26/12/01/000/000/000
Fire detection
MMA 26.12.01.721 A 1Y X 36 D
Functional test.
FT

26/12/01/000/000/010
Smoke detector
CMM 26.19.09 A 1Y X 36 D
§ CLEANING
FR2212 (704A42833000)
Cleaning.
CLN

AS 332 L2
05-20-00
2016.07.18 ATA 26 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

26-13 MGB FIRE DETECTION SYSTEM

26/13/00/000/000/010
Detector
MMA 26.13.00.211 A 750 FH X 75 FH
26.13.00.211.001 // 2Y X 73 D
26.13.00.211.003
26.13.00.211.004
C33 (-)
H342 (704A42820033)
Visual inspection.
Functional test.
GVI|FT

26/13/00/000/000/020
Detector
MMA 26.13.00.211 A 750 FH X 75 FH
26.13.00.211.002 // 2Y X 73 D
26.13.00.211.005
26.13.00.211.006
26.13.00.211.007
332A08-8651-02 (-)
H352 (704A42820050)
Visual inspection.
Functional test.
GVI|FT

26-14 OPT - APU FIRE DETECTION SYSTEM

26/14/00/000/000/000
Fire detection system
MMA 26.14.01.721 A 6Y X 180 D
26.14.01.721.001
Test.
FT

26-21 ENGINE FIRE EXTINGUISHING SYSTEM

26/21/00/000/000/015
Stainless-steel extinguisher bottle
MMA 26.21.00.722 PO A 1Y X 36 D
26.21.00.221.001
863490-01 (704A42820046)
After the introduction to service of a new, overhauled or repaired component.
Weighing.
WGH

AS 332 L2
05-20-00
2016.07.18 ATA 26 Page 2
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

26/21/00/000/000/000
Stainless-steel extinguisher bottle
A 5Y X 0A
862690-00 (704A42820028)
863490-00 (704A42820038)
863490-01 (704A42820046)
TSM or last reproof-test.
Bottle reproof test.
To be performed at the manufacturer's or in an approved workshop.
NPT

26/21/00/000/000/010
Stainless-steel extinguisher bottle
CMM 26.19.98 A 6M X 18 D
MMA 26.21.00.722
26.21.00.221.001
862690-00 (704A42820028)
Weighing.
WGH

26/21/00/000/000/040
Pyrotechnic cartridge
MMA 26.21.00.722 A 6M X 18 D
26.21.00.722.001
26.21.00.722.002
861345 (704A38710020)
861355 (704A38710021)
Test.
Perform one of the two subtasks.
FT

26/21/00/000/000/045
Pyrotechnic cartridge
MMA 26.21.00.722 A 1Y X 36 D
26.21.00.722.001
26.21.00.722.002
863080-00 (704A38710040)
863085-00 (704A38710041)
Test.
Perform one of the two subtasks.
FT

AS 332 L2
05-20-00
2016.07.18 ATA 26 Page 3
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

26/21/00/000/000/070
Double check valve
MMA 26.21.00.212 A 2Y X 73 D
26.21.00.212.001
26.21.00.212.002
Check.
DI

26/21/00/000/000/080
Fire extinguishing system
MMA 26.21.00.211 A 2Y X 73 D
Check the system, extinguishers, pipes and diffusers.
DI

26/21/00/000/000/090
Fire detection
MMA 26.21.00.721 A 6Y X 180 D
Percussion tests.
FT

26-22 CABIN FIRE EXTINGUISHER

26/22/00/000/000/010
Portable extinguisher
MMA 26.22.00.061 A 1Y X 36 D
Removal for weighing and checking of the support.
WGH|DI

26-24 OPT - APU FIRE EXTINGUISHING SYSTEM

26/24/01/000/000/000
Extinguisher bottle
A 5Y X 0A
25700-1 (704A42820029)
25700-2 (704A42820037)
25700-3 (-)
25700-4 (704A42820045)
Bootle reproof test.
To be performed at the manufacturer's or in an approved workshop.
NPT

AS 332 L2
05-20-00
2016.07.18 ATA 26 Page 4
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

26/24/01/000/000/005
Pyrotechnic cartridge
MMA 26.24.01.721 A 6M X 18 D
26.24.01.721.001
30600-18 (704A38710036)
Check.
FT

26/24/01/000/000/010
Extinguisher bottle
MMA 26.24.01.721 A 6M X 18 D
26.24.01.221.001
Weighing.
WGH

26/24/01/000/000/030
Fire extinguishing system
MMA 26.24.01.211 A 2Y X 73 D
Check.
DI

End of the Document Unit

AS 332 L2
05-20-00
2016.07.18 ATA 26 Page 5
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 28-FUEL

28-00 FUEL
28/00/00/000/000/000
Tank mounting plates
MMA 28.00.00.211 A 750 FH X 75 FH
// 2Y X 73 D
Check.
DI|TCK

28-10 STORAGE
28/10/00/000/000/010
Fuel tank
MTC 20.08.06.401 A 3M X 9D
Tropical and damp atmosphere
Preventive fungus-resistant treatment of fuel circuits and tanks.
RS

28/10/00/000/000/020
Crash-proof fuel cell
MMA 28.10.00.221 A 6Y X 180 D
Detailed check with removal.
First inspection: left longitudinal fuel tank.
Second inspection: right longitudinal fuel tank and transverse rear fuel tank.
If deteriorations are detected, remove all the fuel tanks.
DI

28/10/00/000/000/030
Fuel tank
MMA 28.10.00.221 A 15 Y X 180 D
Detailed check with removal of all the fuel tanks.
DI

28-12 OPT - CRASHWORTHY FUEL TANK

28/12/00/000/000/000
Crash-proof fuel cell
MMA 28.12.00.221 A 6Y X 180 D
Detailed check with removal.
First inspection: left longitudinal fuel tank.
Second inspection: right longitudinal fuel tank and transverse rear fuel tank.
If deteriorations are detected, remove all the fuel tanks.
DI

AS 332 L2
05-20-00
2015.01.15 ATA 28 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

28/12/00/000/000/010
Fuel tank
MMA 28.12.00.221 A 15 Y X 180 D
Detailed check.
DI

28-13 OPT - FERRY TANK

28/13/01/211/003/000
Ferry tank
MMA 28.13.01.211 A 8Y X 180 D
28.13.01.211.003
Bonding check.
DI

28-14 OPT - SUPPLEMENTARY FUEL TANK

28/14/01/000/000/000
Sponson supplementary fuel tanks
MMA 28.14.01.211 A 750 FH X 75 FH
Check.
GVI

28/14/01/000/000/010
Sponson supplementary fuel tanks - Bleed control
MMA 28.14.01.641 A 6M X 18 D
Tropical and damp atmosphere
Greasing the bleed remote control system.
LUB

28/14/01/000/000/020
Sponson supplementary fuel tanks - Bleed control
MMA 28.14.01.641 A 2Y X 73 D
Greasing the bleed remote control system.
LUB

28/14/02/000/000/000
Fuel tank system, additional 600 liters
MMA 28.14.02.211 A 750 FH X 75 FH
28.14.02.211.001
Check.
DI

AS 332 L2
05-20-00
2015.01.15 ATA 28 Page 2
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

28-15 VENTING
28/15/00/000/000/000
Venting
MMA 28.15.03.221 A 6Y X 180 D
Check.
DI

28-17 FUEL TANK TRANSFER SYSTEM

28/17/01/000/000/010
Pump, transfer
CMM 28.11.02 A 3000 FH X 300 FH
Check brushes and replacing bearing and seals.
DI

28/17/01/000/000/030
Check valve
MMA 28.17.01.221 A 9000 FH X 300 FH
// 15 Y X 180 D
Check.
DI

28/17/02/000/000/030
OPT - Crash-proof fuel cell transfer system check valve
MMA 28.17.02.221 A 9000 FH X 300 FH
// 15 Y X 180 D
Test.
FT

28-18 JET PUMP SYSTEM

28/18/00/000/000/000
Strainer and jet pump
MMA 28.18.00.061 A 1500 FH X 150 FH
28.18.00.031.002 // 4Y X 146 D
28.18.00.431.001
Cleaning.
CLN

28/18/00/000/000/010
Tightness of jet pump check valves
MMA 28.18.00.221 A 9000 FH X 300 FH
// 15 Y X 180 D
Check.
GR

AS 332 L2
05-20-00
2015.01.15 ATA 28 Page 3
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

28-19 OPT - PRESSURE REFUELING

28/19/00/000/000/000
Pressure refueling system
MMA 28.19.01.721 A 9000 FH X 300 FH
// 15 Y X 180 D
Test.
FT

28/19/00/000/000/010
Pressure refueling
MMA 28.19.01.723 A 1200 FH X 120 FH
Opening tests of the magnetic valves in test phase.
FT

28-20 FUEL SUPPLY

28/20/00/000/000/055
Filter - Filter element
CMM 28.22.98 A 1000 FH X 100 FH
MMA 28.20.00.063
28.20.00.033.001
402B25-1 (704A34629021)
402B25-11 (704A34629024)
Cleaning.
CLN

28/20/00/000/000/075
Filter - Filter element
CMM 28.09.33 A 500 FH X 50 FH
MMA 28.20.00.063
28.20.00.033.001
57189 (NR007702930)
57189-1 (NR007702939)
Cleaning.
CLN

28/20/00/000/000/110
Fuel supply
MMA 28.20.00.221 A 9000 FH X 300 FH
// 15 Y X 180 D
Check.
DI

AS 332 L2
05-20-00
2015.01.15 ATA 28 Page 4
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

28-21 OPT - CROSSFEED SYSTEM

28/21/00/000/000/000
Fuel shut-off cock with crossfeed system
MMA 28.21.01.722 A 750 FH X 75 FH
28.21.01.722.001 // 2Y X 73 D
28.21.01.722.002
Test.
FT

28-41 CONTROL AND MONITORING

28/41/01/000/000/000
Clogging indicator
MMA 28.41.01.721 A 750 FH X 75 FH
28.41.01.721.001 // 18 M X 54 D
Indicating test.
FT

28/41/01/000/000/010
Fuel shut-off cock
MMA 28.41.01.724 A 1500 FH X 150 FH
// 4Y X 146 D
Test.
FT

28/41/01/000/000/020
Fuel low level indication
MMA 28.41.01.726 A 6Y X 180 D
Functional test.
FT

28/41/01/000/000/030
Pressure switch
MMA 60.00.00.221 A 6Y X 180 D
60.00.00.221.001
Check the setting.
DI

28-42 OPT - DIGITAL FLOWMETER

28/42/01/000/000/000
Digital flowmeter
MMA 28.42.01.211 A 750 FH X 75 FH
Visual check.
GVI

AS 332 L2
05-20-00
2015.01.15 ATA 28 Page 5
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

28/42/01/000/000/010
Digital flowmeter
MMA 28.42.01.721 A 750 FH X 75 FH
Test.
FT

End of the Document Unit

AS 332 L2
05-20-00
2015.01.15 ATA 28 Page 6
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 29-HYDRAULIC POWER

29-00 HYDRAULIC POWER

29/00/00/000/000/000
Accumulators
MMA 29.00.00.612 A 750 FH X 75 FH
29.00.00.612.001 // 2Y X 73 D
Charging pressure check.
LUB

29/00/00/000/000/035
Hydraulic system
MMA 29.00.00.651 A 2Y X 0A
PRE MOD 0726562
Salt-laden atmosphere
Hydraulic fluid change.
DRN

29/00/00/000/000/037
Hydraulic system
MMA 29.00.00.652 A 2Y X 0A
POST MOD 0726562
Salt-laden atmosphere
Hydraulic fluid change.
DRN

29/00/00/000/000/040
Hydraulic system
MMA 29.00.00.651 A 3000 FH X 0A
// 4Y X 0A
PRE MOD 0726562
Hydraulic fluid change.
DRN

29/00/00/000/000/045
Hydraulic system
MMA 29.00.00.652 A 3000 FH X 0A
// 4Y X 0A
POST MOD 0726562
Hydraulic fluid change.
DRN

AS 332 L2
05-20-00
2016.07.18 ATA 29 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

29/00/00/000/000/050
Overpressure circuit
MMA 29.00.00.781 A 9000 FH X 300 FH
// 15 Y X 180 D
Test.
FT

29/00/00/000/000/060
Hydraulic system - Hose
MMA 29.00.00.617 A 750 FH X 75 FH
29.00.00.211.001
PRE MOD 0726955
Check.
GVI

29/00/00/520/617/100
Hydraulic system - Hose
MMA 29.00.00.617 A 8Y X 180 D
29.00.00.061.001
660119EE0602 (704A34413252)
660120EE0601 (704A34413253)
660139EE0601 (704A34413346)
660918EE0601 (704A34413262)
661918EE1204 (704A34413260)
704A34413251 (-)
A867701 (704A34413361)
A8697-01 (704A34413335)
PRE MOD 0726955
Removal for replacement.
RS

29-11 LEFT HYDRAULIC SYSTEM

29/11/00/000/000/060
Main left hydraulic power generating system
MMA 29.11.00.211 A 3000 FH X 300 FH
29.11.00.211.001 // 4Y X 146 D
Check.
GVI

29/11/00/000/000/070
Auxiliary electro-pump
MMA 29.11.00.212 A 750 FH X 75 FH
29.11.00.212.001
Functional check and test.
GVI|FT

AS 332 L2
05-20-00
2016.07.18 ATA 29 Page 2
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

29/11/00/000/000/080
Splines on left hydraulic pump drive shaft
MMA 29.11.00.221 A 750 FH X 75 FH
Detailed check.
DI

29-12 RIGHT HYDRAULIC SYSTEM

29/12/00/000/000/040
Main right hydraulic power generating system
MMA 29.12.00.211 A 3000 FH X 300 FH
29.12.00.211.001 // 4Y X 146 D
Check.
GVI

29/12/00/000/000/050
Splines on right hydraulic pump drive shaft
MMA 29.12.00.221 A 750 FH X 75 FH
Detailed check.
DI

29/12/00/000/000/060
Tail rotor servocontrol shut-off solenoid valve
MMA 29.00.00.613 A 750 FH X 75 FH
POST MOD 0726414.
Functional test.
FT

End of the Document Unit

AS 332 L2
05-20-00
2016.07.18 ATA 29 Page 3
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 30-ICE AND RAIN PROTECTION

30-21 OPT - AIR INTAKE HEATED MAT

30/21/00/000/000/030
Engine air intakes and heating mats system
CMM 30.29.95 A 750 FH X 75 FH
// 2Y X 73 D
Check.
DI

30/21/00/000/000/040
Heating mat
MMA 30.21.01.721 A 750 FH X 75 FH
// 2Y X 73 D
Functional test.
FT

30/21/00/000/000/060
Heating mat
MMA 30.21.01.751 A 750 FH X 75 FH
30.21.01.751.001 // 2Y X 73 D
30.21.01.751.004
PRE MOD 332P083234 & PRE MOD 0726540.
Wiring check and insulation test.
DI

30/21/00/000/000/070
Heating mat
MMA 30.21.01.751 A 750 FH X 75 FH
30.21.01.751.001 // 2Y X 73 D
30.21.01.751.003
592180 (704A34672001)
POST MOD 332P083234 & PRE MOD 0726540.
Wiring check and insulation test.
DI

30/21/00/000/000/080
Heating mat
MMA 30.21.01.751 A 750 FH X 75 FH
30.21.01.751.002 // 2Y X 73 D
POST MOD 0726540.
Visual check of the wiring moving part.
VC

AS 332 L2
05-20-00
2015.10.29 ATA 30 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

30-22 OPT - ELECTRICAL MULTI-PURPOSE AIR INTAKES

30/22/00/000/000/000
Electrical multi-purpose air intakes
MMA 30.22.01.211 A 750 FH X 75 FH
// 2Y X 73 D
Check.
DI

30/22/00/000/000/010
Bullet seal
MMA 30.22.01.212 A 750 FH X 75 FH
// 2Y X 73 D
POST MOD 0726362.
Detailed check.
DI

30/22/00/000/000/050
Multi-purpose air intakes
MMA 30.22.01.211 A 750 FH X 75 FH
30.22.01.211.002
Borescope inspection of the MPAI.
CLN

30-31 PITOT DE-ICING SYSTEM

30/31/00/000/000/000
Deicing system, pitot heads
MMA 30.31.00.721 A 6Y X 180 D
Test.
FT

30-41 PILOT'S AND COPILOT'S HEATED WINDSCREEN PANELS

30/41/00/000/000/000
Heated windows, pilot and copilot
MMA 30.41.01.721 A 6Y X 180 D
Perform electrical tests.
FT

30/41/00/000/000/010
Heated window, central
MMA 30.41.02.721 A 6Y X 180 D
Perform electrical tests.
FT

AS 332 L2
05-20-00
2015.10.29 ATA 30 Page 2
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

30-42 PILOT'S AND COPILOT'S WINDSCREEN WIPERS

30/42/00/000/000/010
Windshield wipers
MMA 30.42.01.721 A 2250 FH X 225 FH
30.42.01.721.001 // 2Y X 73 D
Check.
Lateral windshield wipers test.
DI|FT

30/42/00/000/000/020
Windshield wipers
MMA 30.42.02.721 A 2250 FH X 225 FH
30.42.02.721.001 // 2Y X 73 D
Check.
Center windshield wiper test.
DI|FT

30-81 OPT - ICE DETECTOR

30/81/00/000/000/000
Ice detection system
MMA 30.81.01.211 A 2Y X 73 D
ROSEMOUNT.
Visual check.
GVI

30/81/00/000/000/010
Ice detector
MMA 30.81.01.721 A 6Y X 180 D
ROSEMOUNT.
Functional test.
GR

End of the Document Unit

AS 332 L2
05-20-00
2015.10.29 ATA 30 Page 3
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 31-IND./RECORDING SYSTEMS

31-52 OPT - AURAL WARNINGS

31/52/00/000/000/000
Voice alarms
MMA 31.52.02.721 A 2Y X 73 D
RACAL ACOUSTICS.
Functional tests.
FT

End of the Document Unit

AS 332 L2
05-20-00
2012.11.29 ATA 31 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 32-LANDING GEAR

32-00 LANDING GEAR

32/00/00/641/000/000
Landing gear
MMA 32.00.00.641 A 1Y X 36 D
// 600 LC X 60 LC
Greasing.
LUB

32-12 RETRACTABLE MAIN LANDING GEAR

32/12/00/000/000/040
Main landing gear - Shock absorbers
MMA 32.12.00.611 A 750 FH X 75 FH
32.12.00.611.004 // 2Y X 73 D
Charging pressure check.
LUB

32/12/00/000/000/050
Main landing gear
MMA 32.12.00.211 A 2Y X 73 D
32.12.00.211.001
Detailed check.
DI

32/12/00/000/000/070
Shock absorber - Actuator spindle
MMA 32.12.00.061 A 4500 FH X 300 FH
// 6Y X 180 D
Removal/installation, clean and check.
DI

32-22 RETRACTABLE NOSE LANDING GEAR

32/22/00/000/000/020
Nose landing gear - Shock absorbers
MMA 32.22.00.611 A 750 FH X 75 FH
32.22.00.611.003 // 2Y X 73 D
Charging pressure check.
LUB

AS 332 L2
05-20-00
2013.12.12 ATA 32 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

32/22/00/000/000/030
Nose landing gear
MMA 32.22.00.211 A 2Y X 73 D
32.22.00.211.001
Detailed check.
DI

32/22/00/000/000/070
Landing gear
MMA 32.22.00.221 A 4500 FH X 300 FH
// 6Y X 180 D
Attachment check.
DI

32/22/00/000/000/080
Landing gear
MMA 32.22.00.222 A 9000 FH X 300 FH
// 15 Y X 180 D
Check the play.
DI

32-30 EXTENSION AND RETRACTION

32/30/00/000/000/000
Landing gear - System
MMA 32.30.00.211 A 9000 FH X 300 FH
// 15 Y X 180 D
Check.
DI

32/30/00/000/000/010
Landing gear
MMA 32.30.00.751 A 9000 FH X 300 FH
// 15 Y X 180 D
Testing with test set.
FT

32/30/00/000/000/020
Landing gear
MMA 32.30.00.751 A 2Y X 73 D
32.30.00.751.002
Ground safety test.
FT

AS 332 L2
05-20-00
2013.12.12 ATA 32 Page 2
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

32/30/00/000/000/030
Landing gear
MMA 32.30.00.722 A 2Y X 73 D
32.30.00.722.001
Test the landing gear position sensors.
FT

32-31 HYDRAULIC UNIT INSTALLATION

32/31/00/000/000/000
Landing gear hydraulic power unit
MMA 32.31.00.211 A 750 FH X 75 FH
97154-120 (704A44333030)
97154-121 (704A44333074)
Check.
GVI

32-32 EMERGENCY EXTENSION SYSTEM

32/32/00/000/000/000
Controls, teleflex
MMA 32.32.00.211 A 750 FH X 75 FH
32.32.00.641.001
Greasing.
LUB

32/32/00/000/000/060
Emergency landing gear extension control
MMA 32.32.00.211 A 9000 FH X 300 FH
// 15 Y X 180 D
Check and greasing.
DI|LUB

32-41 MAIN LANDING GEAR WHEEL

32/41/00/000/000/010
Main landing gear - Wheels
MMA 32.41.00.221 A 2Y X 73 D
// 1200 LC X 120 LC

Check and maintenance.

DI

AS 332 L2
05-20-00
2013.12.12 ATA 32 Page 3
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

32-42 NOSE LANDING GEAR WHEEL

32/42/00/000/000/010
Nose landing gear - Wheels
MMA 32.42.00.221 A 2Y X 73 D
// 1200 LC X 120 LC

Check and maintenance.

DI

32-43 BRAKES
32/43/00/000/000/010
Brake linings
MMA 32.43.01.211 A 1Y X 36 D
32.43.01.211.001 // 600 LC X 60 LC
Check.
DI

32/43/00/000/000/020
Wheel brake hydraulic system
MMA 32.43.00.211 A 9000 FH X 300 FH
// 15 Y X 180 D
Check.
DI

32/43/00/000/000/040
Brake unit
MMA 32.43.01.721 A 9000 FH X 300 FH
// 15 Y X 180 D
Braking torque and pressure check.
DI

32/43/00/000/000/050
Differential brake control
MMA 32.43.03.871 A 4500 FH X 300 FH
// 6Y X 180 D
Control system filling and bleeding.
LUB

AS 332 L2
05-20-00
2013.12.12 ATA 32 Page 4
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

32-52 NOSE LANDING GEAR WHEEL STEERING LOCK

32/52/00/000/000/000
Teleflex control
MMA 32.52.00.211 A 750 FH X 75 FH
32.52.00.641.001
Greasing.
LUB

32/52/00/000/000/010
Castoring lock pin
MMA 32.52.00.061 A 4500 FH X 300 FH
// 6Y X 180 D
Removal/installation, clean and castoring check.
DI

32/52/00/000/000/020
Nose landing gear castoring lock
MMA 32.52.00.211 A 750 FH X 75 FH
32.52.00.211.001 // 2Y X 73 D
Control check.
GVI

32/52/00/000/000/025
Nose landing gear castoring lock
MMA 32.52.00.211 A 750 FH X 75 FH
32.52.00.641.001 // 2Y X 73 D
Greasing.
LUB

32/52/00/000/000/030
Nose landing gear castoring lock
MMA 32.52.00.721 A 4500 FH X 300 FH
// 6Y X 180 D
Control test.
FT

32-71 TAIL BUMPER

32/71/00/000/000/010
Tail skid - Shock absober
MMA 32.71.00.221 A 750 FH X 75 FH
32.71.00.221.001 // 2Y X 73 D
Detailed check.
DI

AS 332 L2
05-20-00
2013.12.12 ATA 32 Page 5
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

32/71/00/000/000/020
Tail skid - Shock absorber
MMA 32.71.00.221 A 1500 FH X 150 FH
32.71.00.221.002 // 2Y X 73 D
Check the play.
DI

32-72 OPT - SKI

32/72/01/000/000/010
Ski
MMA 32.72.02.211 A 750 FH X 75 FH
MMA 32.72.03.211 // 2 Y X 73 D
MMA 32.72.04.211
System check.
DI

End of the Document Unit

AS 332 L2
05-20-00
2013.12.12 ATA 32 Page 6
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 33-LIGHTS

33-10 LIGHT
33/10/00/000/000/000
Cockpit light
MMA 33.10.00.721 A 15 Y X 180 D
Test.
FT

33-22 LIGHTED SIGNS

33/22/00/000/000/000
Ordinance lights
MMA 33.22.01.721 A 750 FH X 75 FH
// 2Y X 73 D
Test.
FT

33-41 OPT - POSITION LIGHTS

33/41/00/000/000/000
Position lights
MMA 33.41.01.061 A 15 Y X 180 D
Cleaning with removal.
CLN

33/41/00/000/000/010
Position lights
MMA 33.41.01.721 A 750 FH X 75 FH
Test.
FT

33-42 OPT - ANTICOLLISION STROBE LIGHTS

33/42/00/000/000/000
Anticollision strobe lights
MMA 33.42.02.061 A 15 Y X 180 D
PRE MOD 0726669.
Cleaning with removal.
CLN

33/42/00/000/000/010
Anticollision strobe lights
MMA 33.42.02.721 A 750 FH X 75 FH
Test.
FT

AS 332 L2
05-20-00
2015.10.29 ATA 33 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

33-43 LANDING LIGHT

33/43/02/000/000/010
Retractable landing light
CMM 33.49.19 A 1Y X 36 D
4202104 (704A46820019)
Removal of light and appearance check of the mechanical parts without disassembly.
External cleaning of the infra-red light.
Lubrication of exposed meshing parts.
DI|CLN|LUB

33/43/02/000/000/015
Retractable landing light
CMM 33.49.19 A 2250 FH X 225 FH
4202104 (704A46820019)
Check.
DI

33/43/03/000/000/000
Fixed landing light in sponson
MMA 33.43.03.721 A 2250 FH X 225 FH
Test.
FT

33/43/03/000/000/010
Fixed landing light in sponson
MMA 33.43.03.221 A 2250 FH X 225 FH
33.43.03.221.001
33.43.03.221.002
Check of the installation.
DI

33/43/03/000/000/020
Fixed landing light in sponson
MMA 33.43.03.221 A 15 Y X 180 D
33.43.03.221.003
Check with removal.
DI

33/43/04/000/000/000
Infra-red light
CMM 33.49.76 A 1Y X 36 D
72-20 (704A46820035)
Removal of the infra-red light and appearance check of the mechanical parts without disassembly.
External cleaning of the infra-red light.
Lubrification of exposed meshing parts.
DI

AS 332 L2
05-20-00
2015.10.29 ATA 33 Page 2
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

33/43/04/000/000/010
Infra-red light
CMM 33.49.76 A 2250 FH X 225 FH
// 4Y X 146 D
72-20 (704A46820035)
Check with removal.
DI

33-45 OPT - SEARCHLIGHT

33/45/03/000/000/020
Searchlight - Fan and brushes
CMM 33.45.96 A 750 FH X 75 FH
SPECTROLAB SX16.
Check.
DI

33/45/03/000/000/030
Searchlight - Junction box
CMM 33.45.96 A 750 FH X 75 FH
SPECTROLAB SX16.
Check.
DI

33/45/03/000/000/040
Searchlight
MMA 33.45.03.201 A 750 FH X 75 FH
33.45.03.201.003
SPECTROLAB SX16.
Check the items under the cabin floor.
DI

33/45/03/201/000/000
Searchlight
MMA 33.45.03.201 A 100 FH X 10 FH
EXC.
33.45.03.201.003
SPECTROLAB SX16.
Check.
GVI

33/45/03/231/000/000
Searchlight
MMA 33.45.03.231 A 300 FH X 30 FH
SPECTROLAB SX16.
Check.
DI

AS 332 L2
05-20-00
2015.10.29 ATA 33 Page 3
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

33/45/03/721/000/000
Searchlight
MMA 33.45.03.721 A 750 FH X 75 FH
SPECTROLAB SX16.
Test.
FT

33-47 LIFE RAFT SPOTLIGHTS

33/47/01/000/000/000
Spotlight
MMA 33.47.01.061 A 4500 FH X 300 FH
// 6Y X 180 D
Removal/installation, clean and check.
DI

33-51 OPT - EMERGENCY LIGHTING

33/51/00/000/000/000
HEEL installation
MMA 33.51.03.721 A 18 M X 54 D
33.51.03.721.001
Test.
FT

33/51/00/000/000/005
HEEL installation - Immersion probe
MMA 33.51.03.721 A 750 FH X 75 FH
33.51.03.721.002 // 2Y X 73 D
Functional test.
FT

33/51/00/000/000/010
HEEL installation - Box power supply
CMM 33.51.92 A 18 M X 54 D
6958-2 (706A36140000)
Check.
DI

33/51/00/000/000/020
HEEL installation - Battery
CMM 33.51.93 A 18 M X 54 D
PAGE 4 (FIG.2)
PAGE 6
Check.
DI

AS 332 L2
05-20-00
2015.10.29 ATA 33 Page 4
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

33/51/01/000/000/000
Emergency lighting
MMA 33.51.01.721 A 2Y X 73 D
Test.
FT

End of the Document Unit

AS 332 L2
05-20-00
2015.10.29 ATA 33 Page 5
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 34-NAVIGATION

34-11 PITOT-STATIC SYSTEM INSTRUMENTS

34/11/00/671/000/000
Air data system
MMA 34.11.00.671 A 750 FH X 75 FH
// 2Y X 73 D
Drying.
CLN

34/11/00/791/000/000
Air data system
MMA 34.11.00.791 A 750 FH X 75 FH
// 2Y X 73 D
Test.
FT

34-22 VERTICAL GYRO GV 76-1

34/22/00/711/000/000
Vertical gyro
MMA 34.22.00.711 A 6Y X 180 D
Functional test.
FT

34-23 STAND-BY COMPASS

34/23/00/000/000/000
Stand-by magnetic compass
MMA 34.23.00.821 A 15 Y X 180 D
Compensation on the ground.
FT

34/23/00/000/000/010
Stand-by magnetic compass
MMA 34.23.00.211 A 15 Y X 180 D
Check.
VC

AS 332 L2
05-20-00
2012.11.29 ATA 34 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

34-42 RADAR
34/42/01/000/000/020
Radar 1400
MMA 34.42.01.211 A 750 FH X 75 FH
// 2 Y X 73 D
Check.
DI

34/42/01/000/000/030
Radar 1400
MMA 34.42.01.821 A 9000 FH X 300 FH
// 15 Y X 180 D
Adjustments and tests of the antenna mechanism.
RIG|FT

34-45 DOPPLER RADAR

34/45/00/000/000/000
DOPPLER radar
MMA 34.45.02.211 A 1Y X 36 D
Salt-laden atmosphere
Check of the installation with removal of the antenna.
DI

34-70 DISPLAY SUB-SYSTEM

34/70/00/721/000/000
Display sub-system
MMA 34.70.00.721 A 15 Y X 180 D
Functional test.
FT

End of the Document Unit

AS 332 L2
05-20-00
2012.11.29 ATA 34 Page 2
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 36-PNEUMATIC

36-00 PNEUMATIC SYSTEM

36/00/00/000/000/020
Filter - Filter element
MMA 36.00.00.611 A 750 FH X 75 FH
36.00.00.611.001
56932 (NR007700450)
PRE MOD 0726363.
Clean.
CLN

36/00/00/000/000/030
Air pressure system
MMA 36.00.00.211 A 2250 FH X 225 FH
36.00.00.211.001
Check.
DI

36/00/00/000/000/040
Dual check valve
CMM 36.19.99 A 9000 FH X 300 FH
// 15 Y X 180 D
Visual check.
VC

36/00/00/000/000/050
Filter - Filter element
MMA 36.00.00.614 A 150 FH X 15 FH
36.00.00.614.001
217-2 (NR084515220)
217-3 (NR084515221)
PRE MOD 0726363.
Tropical and damp atmosphere
Salt-laden atmosphere
Sand-laden and/or dust-laden atmosphere
Maintenance.
CLN

AS 332 L2
05-20-00
2012.11.29 ATA 36 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

36/00/00/000/000/060
Filter - Filter element
MMA 36.00.00.613 A 150 FH X 15 FH
36.00.00.613.001
56932 (NR007700450)
PRE MOD 0726363.
Tropical and damp atmosphere
Salt-laden atmosphere
Sand-laden and/or dust-laden atmosphere
Maintenance.
CLN

End of the Document Unit

AS 332 L2
05-20-00
2012.11.29 ATA 36 Page 2
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 45-CENTRAL MAINT SYSTEM

45-11 OPT - MAINTENANCE SYSTEM

45/11/02/000/000/020
EUROHUMS - Chip detector
MMA 45.11.02.754 A 750 FH X 75 FH
45.11.02.754.001
Continuity check.
Without electric indication.
FT

45/11/02/000/000/040
EUROHUMS - TRH rotor shaft groove
MMA 45.11.02.061 A 1750 FH X 175 FH
45.11.02.212.001 // 2Y X 73 D
Check for corrosion under ring, strobe target attachment.
DI

45/11/02/000/000/055
EUROHUMS - Accelerometer system
MMA 45.11.02.772 A 3750 FH X 300 FH
// 3Y X 109 D
Check of the accelerometer acquisition channel of dynamics parts.
FT

45/11/02/000/000/057
EUROHUMS - Accelerometer system
MMA 45.11.02.772 A 2Y X 73 D
Check of the accelerometer acquisition channel of engine.
FT

45/11/02/000/000/060
EUROHUMS - CV/FDR
MMA 45.11.02.756 A 1Y X 36 D
Check the recording.
FT

45/11/02/000/000/070
EUROHUMS - CV/FDR
CMM 31.32.89 A 2500 FH X 250 FH
// 1Y X 36 D
Check, clean.
For the maintenance of the emergency locator transmitter, refer to ATA 25-66.
DI|CLN

AS 332 L2
05-20-00
2015.10.29 ATA 45 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

45/11/02/000/000/080
EUROHUMS - CV/FDR immersion probe
MMA 45.11.02.725 A 2Y X 73 D
45.11.02.725.001
Test.
FT

45/11/06/000/000/000
EUROARMS - CV/FDR
MMA 45.11.06.754 A 1Y X 36 D
Checking the recording.
FT

45/11/06/000/000/010
EUROARMS - Erase function (CVR)
MMA 45.11.06.721 A 6M X 18 D
45.11.06.721.001
Test.
FT

45/11/06/000/000/020
EUROARMS - Installation (CVR)
MMA 45.11.06.741 A 6M X 18 D
Test.
FT

45/11/06/000/000/030
EUROARMS - CVR immersion probe
MMA 45.11.06.722 A 2Y X 73 D
45.11.06.722.001
Test.
FT

45/11/06/000/000/040
EUROARMS - CVR and FDR systems
CMM 31.32.90 A 2Y X 73 D
Penny and Giles.
Test.
FT

45/11/06/000/000/050
EUROARMS - SSCVFDR
CMM 31.32.90 A 6Y X 180 D
Penny and Giles.
Test.
FT

AS 332 L2
05-20-00
2015.10.29 ATA 45 Page 2
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

45/11/06/000/000/060
EUROARMS - Chip detector
MMA 45.11.06.753 A 750 FH X 75 FH
45.11.06.753.001
Continuity check.
Without electric indication.
FT

45/11/06/000/000/090
EUROARMS - Recorder
MMA 45.11.06.763 A 500 FH X 50 FH
Parameters check.
FT

45/11/06/000/000/100
EUROARMS - TRH rotor shaft groove
MMA 45.11.06.061 A 1750 FH X 175 FH
45.11.06.212.001 // 2Y X 73 D
Check for corrosion under ring, strobe target attachment.
DI

45/11/06/000/000/110
EUROARMS - Accelerometer system
MMA 45.11.06.211 A 3750 FH X 300 FH
// 3Y X 109 D
Check.
DI

45/11/06/000/000/120
EUROARMS - FDR three-axis accelerometer
MMA 45.11.06.766 A 3750 FH X 300 FH
// 3Y X 109 D
Acceleration signal acquisition testing.
FT

45-30 CENTRALIZED MAINTENANCE SYSTEM

45/30/00/000/000/000
Display sub-system
MMA 45.30.00.741 A 15 Y X 180 D
Test.
FT

End of the Document Unit

AS 332 L2
05-20-00
2015.10.29 ATA 45 Page 3
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 49-AUXILIARY POWER UNIT

49-21 OPT - APU

49/21/01/000/000/000
Auxiliary power unit
MMA 49.21.01.211 A 2Y X 73 D
Check for installation.
DI

49/21/02/000/000/020
Sand filter
CMM 71.61.96 A 50 OPH X 5 OPH
PAGE 501
Visual check.
OPH = APU operating hours.
GVI

End of the Document Unit

AS 332 L2
05-20-00
2012.11.29 ATA 49 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 52-DOORS

52-11 CREW DOOR

52/11/00/000/000/000
Right cockpit door
MMA 52.11.01.211 A 750 FH X 75 FH
// 2Y X 73 D
Check.
DI

52/11/00/000/000/010
Left cockpit door
MMA 52.11.02.211 A 750 FH X 75 FH
// 2Y X 73 D
Check.
DI

52/11/00/000/000/020
Cockpit doors
MMA 52.11.03.711 A 750 FH X 75 FH
Jettison test.
DI

52-12 PLUG DOOR

52/12/00/000/000/000
Left plug door
MMA 52.12.01.211 A 750 FH X 75 FH
// 18 M X 54 D
Check.
DI

52/12/00/000/000/010
Right plug door
MMA 52.12.02.211 A 750 FH X 75 FH
// 18 M X 54 D
Check.
DI

52/12/00/000/000/020
Left plug door
MMA 52.12.03.711 A 375 FH X 37 FH
52.12.03.711.002
POST MOD 0725366.
Jettison test.
DI

AS 332 L2
05-20-00
2015.10.29 ATA 52 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

52/12/00/000/000/030
Right plug door
MMA 52.12.04.711 A 375 FH X 37 FH
52.12.04.711.002
POST MOD 0725366.
Jettison test.
DI

52/12/00/000/000/040
Left plug door
MMA 52.12.01.211 A 50 FH X 5 FH
52.12.01.211.001
Visual check.
GVI

52/12/00/000/000/045
Right plug door
MMA 52.12.02.211 A 50 FH X 5 FH
52.12.02.211.001
Visual check.
GVI

52/12/00/000/000/060
Left plug door
MMA 52.12.01.211 A 1Y X 36 D
52.12.01.211.005
Check.
GVI|CLN

52/12/00/000/000/070
Right plug door
MMA 52.12.02.211 A 1Y X 36 D
52.12.02.211.004
Check.
GVI|CLN

52/12/01/000/000/000
Left plug door
MMA 52.12.01.211 A 250 FH X 25 FH
52.12.01.211.002
PRE MOD 0726176.
Check left and right lower rail.
DI

AS 332 L2
05-20-00
2015.10.29 ATA 52 Page 2
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

52-13 OPT - STAIRWAY DOOR

52/13/00/000/000/000
Stairway door
MMA 52.13.01.211 A 750 FH X 75 FH
// 2Y X 73 D
Detailed check.
DI

52/13/01/000/000/010
Stairway door
MMA 52.13.01.211 A 75 FH X 7 FH
52.13.01.211.002
52.13.01.211.004
Detailed check.
DI

52-14 OPT - DOUBLE-WING DOOR

52/14/00/000/000/030
Hinged door
MMA 52.14.01.211 A 750 FH X 75 FH
// 18 M X 54 D
Detailed check.
DI

52-31 OPT - BAGGAGE COMPARTMENT DOOR

52/31/00/000/000/000
Aft baggage compartment door
MMA 52.31.01.211 A 750 FH X 75 FH
52.31.01.211.001 // 4Y X 146 D
PRE MOD 0726951
Detailed check.
DI

52/31/00/000/000/010
Aft baggage compartment door
MMA 52.31.01.211 A 1500 FH X 150 FH
52.31.01.211.001 // 4Y X 146 D
POST MOD 0726951
Detailed check.
DI

AS 332 L2
05-20-00
2015.10.29 ATA 52 Page 3
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

52-72 COWLINGS AND DOORS OPEN INDICATING SYSTEM

52/72/00/000/000/000
Engine cowling
MMA 52.72.00.821 A 750 FH X 75 FH
52.72.00.731.001
Indication test.
FT

52/72/00/000/000/010
Ground power receptacle door
MMA 52.72.00.821 A 750 FH X 75 FH
52.72.00.731.002 // 2Y X 73 D
Indication test.
FT

52/72/00/000/000/020
Aft compartment door
MMA 52.72.00.821 A 750 FH X 75 FH
52.72.00.731.004 // 2Y X 73 D
Indication test.
FT

52/72/00/000/000/030
Forward left hatch
MMA 52.72.00.821 A 750 FH X 75 FH
52.72.00.731.005 // 2Y X 73 D
Indication test.
FT

End of the Document Unit

AS 332 L2
05-20-00
2015.10.29 ATA 52 Page 4
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 53-FUSELAGE

53-00 FUSELAGE
53/00/00/000/000/020
Fuselage
A 7D X 0A
Salt-laden atmosphere
Clean with fresh water.
In case of low-altitude or hover flights, the interval of these operations is to be reduced
to the check after the last flight of the day.
CLN

53/00/00/000/000/030
Fuselage
MMA 05.55.00.611 A 6M X 18 D
Salt-laden atmosphere
Tropical and damp atmosphere
Check the corrosion prevention beads.
GVI

53/00/00/000/000/050
Structure
MMA 53.00.00.612 A 15 Y X 180 D
Detailed check.
DI

53-21 PRIMARY STRUCTURE

53/21/02/211/000/000
Canopy structure
MMA 53.21.02.211 A 750 FH X 75 FH
// 2Y X 73 D
Check.
GVI

53/21/02/211/000/010
Canopy structure
MMA 53.21.02.211 A 75 FH X 7 FH
53.21.02.211.002
Operation to be carried out as from 4500 FH.
Check of the lateral posts.
GVI

AS 332 L2
05-20-00
2016.07.18 ATA 53 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

53-22 LOWER STRUCTURE

53/22/00/000/000/000
Lower bottom structure
MMA 53.22.00.221 A 6Y X 180 D
53.22.00.221.001
Detailed structural check with removal of the fuel cells.
First check: inspection of left longitudinal.
Second check: inspection of right longitudinal + aft transversal .
If deteriorations are detected: remove all the fuel cells.
DI

53/22/00/000/000/020
Lower bottom structure
MMA 53.22.00.221 A 15 Y X 180 D
53.22.00.221.001
Detailed structural check with removal of the fuel cells.
DI

53/22/00/000/000/030
Lower bottom structure
MMA 53.22.00.221 A 4500 FH X 300 FH
53.22.00.221.002 // 6Y X 180 D
Detailed check of the main and nose landing gear wells.
DI

53/22/00/000/000/040
Lower bottom structure
MMA 53.22.00.221 A 8Y X 180 D
53.22.00.221.003
Check beneath the pilot's floor.
DI

53/22/00/000/000/050
Lower bottom structure
MMA 53.22.00.221 A 3Y X 109 D
53.22.00.221.004
Check with the gutters removed.
DI

53-23 UPPER STRUCTURE AND TRANSMISSION DECK

53/23/00/000/000/000
Transmission deck
MMA 53.23.00.211 A 750 FH X 75 FH
Visual check.
GVI

AS 332 L2
05-20-00
2016.07.18 ATA 53 Page 2
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

53/23/00/000/000/010
Skin panels and structure
MMA 53.23.00.212 A 2Y X 73 D
Visual check.
GVI

53/23/00/000/000/030
Screws attaching the horizontal members Z1350 and frame X5295
MMA 53.23.00.214 A 9000 FH X 300 FH
// 15 Y X 180 D
Readjustment of the tightening torque.
DI|RTQ

53/23/00/000/000/040
Frame X5295
MMA 53.23.00.215 A 400 FH X 40 FH
POST MOD 0726517.
Visual check of the splicing.
VC

53-24 INTERMEDIATE STRUCTURE

53/24/00/000/000/050
Bonded joint on frame 9900 inside
MMA 53.24.00.211 PO A 100 FH X 10 FH
53.24.00.211.005
After the introduction to service of a new, overhauled or repaired component.
Check.
GVI

53/24/00/000/000/130
Main sandwich structure
MMA 53.24.00.211 PO A 750 FH X 75 FH
53.24.00.211.013
After the introduction to service of a new, overhauled or repaired component.
Check.
DI

53/24/00/000/000/150
Straight sandwich structure, inside with coverings removed
MMA 53.24.00.211 PO A 750 FH X 75 FH
53.24.00.211.014
After the introduction to service of a new, overhauled or repaired component.
Check.
DI

AS 332 L2
05-20-00
2016.07.18 ATA 53 Page 3
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

53/24/00/000/000/170
Main monolithic structure except frame 9900
MMA 53.24.00.211 PO A 750 FH X 75 FH
53.24.00.211.015 & 1500 FH X 150 FH
After the introduction to service of a new, overhauled or repaired component.
Check.
GVI

53/24/00/000/000/000
Fishplate 7225
MMA 53.24.00.211 A 3750 FH X 300 FH
53.24.00.211.001 // 8Y X 180 D
Check.
GVI

53/24/00/000/000/010
Frame 9900
MMA 53.24.00.211 A 3750 FH X 300 FH
53.24.00.211.002 // 8Y X 180 D
Check.
DI

53/24/00/000/000/015
Tail boom-to-frame 9900
MMA 53.25.00.213 A 825 FH X 82 FH
PRE MOD 0726313.
Aircraft that have logged more than 13500 FH.
Skin check.
If the cracks correspond to the criteria of sub-task 002, check every 165 FH.
DI

53/24/00/000/000/040
Fittings, frame 9900 and 7225
MMA 53.24.00.211 A 3750 FH X 300 FH
53.24.00.211.004 // 8Y X 180 D
Check.
DI

53/24/00/000/000/070
Bonding joint, frame 9900 - Outside
MMA 53.24.00.211 A 3750 FH X 300 FH
53.24.00.211.006 // 8Y X 180 D
Check on outside by tapping.
GVI

AS 332 L2
05-20-00
2016.07.18 ATA 53 Page 4
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

53/24/00/000/000/080
Bonding joint, frame 9900 - Outside
MMA 53.24.00.211 A 3750 FH X 300 FH
53.24.00.211.007 // 8Y X 180 D
Check.
GVI

53/24/00/000/000/090
Adhesive attachment, electrical bonding foil
MMA 53.24.00.211 A 1500 FH X 150 FH
53.24.00.211.008
Check.
GVI

53/24/00/000/000/100
Intermediate structure and tail boom
MMA 53.24.00.211 A 1500 FH X 150 FH
53.24.00.211.009 // 2Y X 73 D
Electrical continuity check.
DI

53/24/00/000/000/110
Intermediate structure and tail boom
MMA 53.24.00.211 A 7500 FH X 300 FH
53.24.00.211.010 // 15 Y X 180 D
Check for electrical continuity.
DI

53/24/00/000/000/120
Joints, frames 7225 and 9900 - Inside and outside
MMA 53.24.00.211 A 3750 FH X 300 FH
53.24.00.211.011 // 8Y X 180 D
Check.
DI

53/24/00/000/000/135
Lateral skin panel of straight structure - Outside
MMA 53.24.00.211 A 1500 FH X 150 FH
53.24.00.211.012 // 2Y X 73 D
Visual check.
GVI

AS 332 L2
05-20-00
2016.07.18 ATA 53 Page 5
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

53/24/00/000/000/140
Standard sandwich structure
MMA 53.24.00.211 A 9000 FH X 300 FH
53.24.00.211.013 // 15 Y X 180 D
53.24.00.211.014
Tapping check.
DI

53/24/00/000/000/180
Structure, monolithic standard structure - Except for frame 9900
MMA 53.24.00.211 A 3750 FH X 300 FH
53.24.00.211.015 // 8Y X 180 D
Check.
GVI

53-25 TAIL STRUCTURE

53/25/00/000/000/020
Intermediate structure/tail boom junction
MMA 53.25.00.212 PO A 15 FH X 1 FH
53.25.00.212.002
Each time after the component is installed.
Tightening torque readjustement of the attachment hardware.
RTQ

53/25/00/000/000/030
Intermediate structure/tail boom junction
MMA 53.25.00.212 PO A 750 FH X 75 FH
53.25.00.212.002
Each time after the component is installed.
Check the tightening torque of the attachment hardware.
TCK

53/25/00/000/000/000
Tail boom
MMA 53.25.00.211 A 750 FH X 75 FH
// 2Y X 73 D
Detailed check.
DI

53/25/00/000/000/040
Intermediate structure/tail boom junction
MMA 53.25.00.212 A 3750 FH X 300 FH
53.25.00.212.002 // 6Y X 180 D
Check the tightening torque of the attachment harware.
TCK

AS 332 L2
05-20-00
2016.07.18 ATA 53 Page 6
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

53/25/00/000/000/050
Intermediate structure/tail boom junction
MMA 53.25.00.212 A 750 FH X 75 FH
53.25.00.212.003 // 2Y X 73 D
Checking junction bolt for corrosion.
DI

53/25/00/000/000/060
Tail boom
MMA 53.25.00.212 A 7500 FH X 300 FH
53.25.00.212.004 // 15 Y X 180 D
Removal for corrosion check.
DI

53-26 FITTINGS AND MOUNTS

53/26/00/000/000/007
Aft section
MMA 53.26.00.222 A 9000 FH X 300 FH
53.26.00.222.006 // 15 Y X 180 D
Detailed check on tail boom transmission deck.
DI

53/26/00/000/000/050
Landing gear spindle and attachment fitting
MMA 53.26.00.223 A 4500 FH X 300 FH
// 6Y X 180 D
Check.
DI

53/26/00/000/000/060
MGB attachment fitting
MMA 53.26.00.061 A 7500 FH X 300 FH
53.26.00.221.001 // 15 Y X 180 D
53.26.00.221.003
53.26.00.221.004
Detailed inspection.
DI

53/26/00/000/000/065
MGB attachment fitting
MMA 53.26.00.061 A 7500 FH X 300 FH
53.26.00.221.002 // 6Y X 180 D
Check of the fitting attachment bolts.
DI

AS 332 L2
05-20-00
2016.07.18 ATA 53 Page 7
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

53/26/00/000/000/080
Forward section
MMA 53.26.00.221 A 9000 FH X 300 FH
53.26.00.221.005 // 15 Y X 180 D
Check of upper structure mounts and fittings.
DI

53/26/00/000/000/085
Forward section
MMA 53.26.00.221 A 9000 FH X 300 FH
53.26.00.221.006 // 15 Y X 180 D
Check of lower structure mounts and fittings.
DI

53/26/00/000/000/090
Plates under MGB suspension bar attachment fitting
MMA 53.26.00.224 A 7500 FH X 300 FH
// 15 Y X 180 D
Detailed check.
DI

53/26/00/000/000/100
Aft section
MMA 53.26.00.222 A 7500 FH X 300 FH
53.26.00.222.001 // 15 Y X 180 D
Detailed check.
DI

53/26/00/000/000/103
Aft section
MMA 53.26.00.222 A 3750 FH X 300 FH
53.26.00.222.004 // 6Y X 180 D
Detailed check of the horizontal stabilizer fittings.
DI

53/26/00/000/000/105
Aft section
MMA 53.26.00.222 A 15 Y X 180 D
53.26.00.222.005
Detailed check of the tail rotor guard damper assembly fittings.
DI

53/26/00/000/000/140
Fitting and mount
MMA 53.26.00.211 A 750 FH X 75 FH
53.26.00.211.001 // 2Y X 73 D
Visual check.
GVI

AS 332 L2
05-20-00
2016.07.18 ATA 53 Page 8
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

53-27 TAIL ROTOR DRIVE SHAFT MOUNTS

53/27/00/000/000/000
Drive shaft bearing block mount
MMA 53.27.00.211 PO A 750 FH X 75 FH
53.27.00.211.001
After the introduction to service of a new, overhauled or repaired component.
Check.
GVI

53/27/00/000/000/010
Drive shaft bearing block mount
MMA 53.27.00.211 A 1500 FH X 150 FH
Visual check.
Check the tightening torque.
GVI|TCK

53-40 SECONDARY STRUCTURE

53/40/00/000/000/000
Secondary structure
MMA 53.40.00.211 A 2Y X 73 D
Tropical and damp atmosphere
Salt-laden atmosphere
Visual check.
DI

53/40/00/000/000/010
Secondary structure
MMA 53.40.00.211 A 4Y X 146 D
Visual check.
DI

53/40/00/000/000/040
Self-sealing check valves
MMA 53.48.00.211 A 100 FH X 10 FH
POST MOD OP26382
Check.
DI

AS 332 L2
05-20-00
2016.07.18 ATA 53 Page 9
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

53-41 INSTRUMENT PANEL

53/41/00/000/000/000
Instrument panel
MMA 53.41.01.211 A 15 Y X 180 D
Check.
DI

53-42 CONSOLE AND SUBPANEL

53/42/01/000/000/000
Interseat console
MMA 53.42.01.211 A 15 Y X 180 D
Check.
DI

53-44 CABIN FLOOR

53/44/00/000/000/000
Cabin floor 800 kg
MMA 53.44.01.211 A 750 FH X 75 FH
53.44.01.211.003 // 2Y X 73 D
Check.
DI

53/44/00/000/000/010
Cabin floor 800 kg
MMA 53.44.01.211 A 2Y X 73 D
53.44.01.211.001
Salt-laden atmosphere
Check.
DI

53/44/00/000/000/025
Cabin floor 800 kg
MMA 53.44.01.211 A 6Y X 180 D
53.44.01.211.001
Check for corrosion.
DI

53/44/00/000/000/030
Cabin floor 800 kg
MMA 53.44.01.211 A 6Y X 180 D
53.44.01.211.002
Check by tap testing (main section).
GVI

AS 332 L2
05-20-00
2016.07.18 ATA 53 Page 10
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

53/44/00/000/000/035
Cabin floor 800 kg
MMA 53.44.01.211 A 1Y X 36 D
53.44.01.211.005
Salt-laden atmosphere
Tropical and damp atmosphere
Visual check.
GVI

53/44/01/000/000/000
Cabin floor 1500 kg
MMA 53.44.02.211 A 750 FH X 75 FH
53.44.02.211.003 // 2Y X 73 D
Check.
DI

53/44/01/000/000/010
Cabin floor 1500 kg
MMA 53.44.02.211 A 2Y X 73 D
53.44.02.211.001
Salt-laden atmosphere
Check.
DI

53/44/01/000/000/025
Cabin floor 1500 kg
MMA 53.44.02.211 A 6Y X 180 D
53.44.02.211.001
Check for corrosion.
DI

53/44/01/000/000/030
Cabin floor 1500 kg
MMA 53.44.02.211 A 6Y X 180 D
53.44.02.211.002
Check by tapping in main area.
GVI

53/44/01/000/000/040
Cabin floor 1500 kg
MMA 53.44.02.211 A 1Y X 36 D
53.44.02.211.005
PRE MOD 0726659
Salt-laden atmosphere
Tropical and damp atmosphere
Visual check.
GVI

AS 332 L2
05-20-00
2016.07.18 ATA 53 Page 11
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

53/44/01/000/000/050
Cabin floor 1500 kg
MMA 53.44.02.211 A 1Y X 36 D
53.44.02.211.006
POST MOD 0726659
Tropical and damp atmosphere
Salt-laden atmosphere
Visual check.
GVI

53-70 COWLINGS AND FAIRINGS

53/70/00/000/000/020
Air intake
MMA 53.70.00.211 PO A 5 FH X 10 FH
53.70.00.211.004
After the introduction to service of a new, overhauled or repaired component.
After installation of a component originating from another helicopter.
Check the locking system.
DI

53/70/00/000/000/030
Engine cowlings
MMA 53.70.00.211 PO A 5 FH X 10 FH
53.70.00.211.005 & 50 FH X 5 FH
After the introduction to service of a new, overhauled or repaired component.
After installation of a component originating from another helicopter.
Check the locking system.
DI

53/70/00/000/000/040
Sliding cowling
MMA 53.70.00.211 PO A 5 FH X 10 FH
53.70.00.211.006 & 50 FH X 5 FH
After the introduction to service of a new, overhauled or repaired component.
After installation of a component originating from another helicopter.
Check the locking system.
DI

53/70/00/000/000/000
Fixed and removable cowlings and their mechanisms
MMA 53.70.00.211 A 750 FH X 75 FH
EXC. // 2Y X 73 D
53.70.00.211.009
Check.
DI

AS 332 L2
05-20-00
2016.07.18 ATA 53 Page 12
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

53/70/00/000/000/010
Fixed and removable cowlings and their mechanisms
MMA 53.70.00.211 A 1500 FH X 150 FH
// 4Y X 146 D
Check.
DI

53-72 ENGINE COWLINGS

53/72/00/000/000/010
Engine cowlings
MMA 53.72.00.063 A 4500 FH X 300 FH
53.72.00.211.001 // 8Y X 180 D
PRE MOD 0725560.
Check with heat shield removal.
DI

53/72/00/000/000/020
Engine cowling - Hinge support
MMA 53.72.00.110 A 2Y X 73 D
Cleaning and rinsing.
CLN

53-76 TAIL BOOM FAIRING

53/76/00/000/000/000
Tail structure fairing
MMA 53.76.00.211 A 250 FH X 25 FH
EXC.
53.76.00.211.002
EXC.
53.76.00.211.007
Check.
DI

53/76/00/000/000/020
Tail structure fairing
MMA 53.76.00.211 A 150 FH X 15 FH
53.76.00.211.007
PRE MOD 0726860
Check.
DI

AS 332 L2
05-20-00
2016.07.18 ATA 53 Page 13
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

53/76/00/000/000/030
Tail structure fairing
MMA 53.76.00.211 A 1200 FH X 120 FH
53.76.00.211.008
332A24-0329-0101 (-)
POST MOD 0726860
Check.
DI

53/76/00/000/000/040
IGB fairing
MMA 53.76.00.211 A 750 FH X 75 FH
53.76.00.211.002
Check.
CLN|GVI

53/76/00/520/211/100
IGB fairing – Fixation bracket
MMA 53.76.00.211 A 100 FH X 10 FH
53.76.00.211.009
Check.
DI

53-77 LANDING GEAR FAIRING

53/77/00/000/000/000
Multipurpose sponsons
MMA 53.77.02.211 A 750 FH X 75 FH
53.77.02.211.001
Check.
GVI

53-78 RADOME
53/78/00/000/000/000
Radome
MMA 53.78.00.211 A 750 FH X 75 FH
// 2Y X 73 D
Check.
GVI|FT

AS 332 L2
05-20-00
2016.07.18 ATA 53 Page 14
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

53-79 OPT - BAGGAGE COMPARTMENT

53/79/00/000/000/000
Baggage compartment
MMA 53.79.01.211 A 750 FH X 75 FH
53.79.01.211.001
Check.
GVI

53/79/00/000/000/020
Structure, baggage compartment sandwich
MMA 53.79.01.211 A 3000 FH X 300 FH
53.79.01.211.002
Check.
DI

End of the Document Unit

AS 332 L2
05-20-00
2016.07.18 ATA 53 Page 15
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 55-STABILIZER

55-11 HORIZONTAL STABILIZER

55/11/00/000/000/000
Composite horizontal stabilizer and carbon tube
MMA 55.11.00.211 A 750 FH X 75 FH
// 2Y X 73 D
Visual check.
GVI

55/11/00/000/000/010
Stabilizer structure/Tail boom structure
MMA 55.11.00.421 A 1500 FH X 150 FH
55.11.00.421.001
Check the tightening torque on the attachments.
TCK

55/11/00/000/000/020
Horizontal stabilizer
MMA 55.11.00.221 A 4500 FH X 300 FH
// 6Y X 180 D
Detailed check with removal.
DI

55/11/00/000/000/030
Horizontal stabilizer - Shackle
MMA 55.11.00.211 A 75 FH X 7 FH
55.11.00.211.003
Check.
GVI

55/11/00/000/000/040
Horizontal stabilizer
MMA 55.11.00.211 A 75 FH X 7 FH
55.11.00.211.004
POST MOD 0726233.
Play check .
GVI

55/11/00/000/000/050
Horizontal stabilizer
MMA 55.11.00.211 A 750 FH X 75 FH
55.11.00.211.001
Check.
GVI

AS 332 L2
05-20-00
2012.11.29 ATA 55 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

End of the Document Unit

AS 332 L2
05-20-00
2012.11.29 ATA 55 Page 2
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 56-WINDOWS

56-10 COCKPIT TRANSPARENT PANELS

56/10/00/000/000/000
Cockpit - Transparent panels
MMA 56.10.00.211 A 750 FH X 75 FH
56.10.00.211.001 // 2Y X 73 D
Check.
GVI

56-20 CABIN WINDOWS

56/20/00/000/000/000
Cabin windows
MMA 56.20.00.211 A 750 FH X 75 FH
56.20.00.211.001 // 2Y X 73 D
Check.
GVI

56/20/00/000/000/010
Window and emergency exit – Quick-release tape
MMA 56.20.00.211 A 75 FH X 7 FH
56.20.00.211.002
PRE MOD 0728136
Check.
GVI

56/20/00/000/000/020
Emergency exit window
MMA 56.20.00.051 A 2Y X 73 D
Removal/Installation for jettison test.
DI

56/20/00/520/211/200
Window and emergency exit – Quick-release handle
MMA 56.20.00.211 A 75 FH X 7 FH
56.20.00.211.003 // 1Y X 36 D
POST MOD 0728136
Check.
GVI

End of the Document Unit

AS 332 L2
05-20-00
2016.07.18 ATA 56 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 60-STD. PRACTS. PROP/ROTOR

60-00 STANDARD MAINTENANCE ROTORS

60/00/00/000/000/070
MGB, IGB, TGB
MMA 60.00.00.641 PO A 25 FH X 3 FH
After the introduction to service of a new, overhauled or repaired component.
Draining and filling.
DRN

60/00/00/000/000/010
Main and tail rotor blades
MMA 60.00.00.111 A 25 FH X 2 FH
Tropical and damp atmosphere
Salt-laden atmosphere
Cleaning.
CLN

60/00/00/000/000/080
MGB and oil cooler
MMA 60.00.00.641 A 400 FH X 40 FH
// 2Y X 73 D
Mineral oil draining/filling.
DRN

60/00/00/000/000/085
MGB and oil cooler
MMA 60.00.00.641 A 750 FH X 75 FH
// 2Y X 73 D
Total AEROGEAR 1032.
Mineral oil draining/filling .
DRN

60/00/00/000/000/090
MGB and oil cooler
MMA 60.00.00.641 A 600 FH X 60 FH
// 4Y X 146 D
Synthetic oil draining/filling.
DRN

AS 332 L2
05-20-00
2013.12.12 ATA 60 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

60/00/00/000/000/095
IGB and TGB
MMA 60.00.00.641 A 750 FH X 75 FH
// 2 Y X 73 D
Total AEROGEAR 1032.
Mineral oil draining/filling.
DRN

60/00/00/000/000/100
IGB and TGB
MMA 60.00.00.641 A 500 FH X 50 FH
// 2 Y X 73 D
Mineral oil draining/filling.
DRN

60/00/00/000/000/110
IGB and TGB
MMA 60.00.00.641 A 1500 FH X 150 FH
// 4Y X 146 D
Synthetic oil draining/filling.
DRN

End of the Document Unit

AS 332 L2
05-20-00
2013.12.12 ATA 60 Page 2
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 62-ROTOR (S)

62-00 MAIN ROTOR

62/00/00/000/000/010
Main rotor
MMA 62.00.00.821 A 9000 FH X 300 FH
// 15 Y X 180 D
Balancing.
DI

62-10 MAIN ROTOR BLADES

62/10/00/000/000/120
Anti-vibrator assembly
MMA 62.10.00.051 PO A 10 FH X 10 FH
62.10.00.021.002
332A11-0460-03 (-)
POST MOD 0740659.
After the introduction to service of a new, overhauled or repaired component.
Check the tightening torque.
TCK

62/10/00/000/000/150
Anti-vibrator assembly
MMA 62.10.00.051 PO A 10 FH X 10 FH
62.10.00.021.002
332A11-0460-04 (-)
POST MOD 0740663
After the introduction to service of a new, overhauled or repaired component.
Check the tightening torque.
TCK

62/10/00/211/001/000
Main rotor blade
MMA 62.10.00.211 PO A 100 FH X 10 FH
EXC.
62.10.00.211.006
EXC.
62.10.00.211.012
EXC.
62.10.00.211.015
EXC.
62.10.00.211.029
After the introduction to service of a new, overhauled or repaired component.
Check.
DI

AS 332 L2
05-20-00
2015.10.29 ATA 62 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

62/10/00/000/000/070
Anti-vibrator
MMA 62.10.00.051 A 2250 FH X 225 FH
Check with complete disassembly.
DI

62/10/00/000/000/130
Anti-vibrator assembly
MMA 62.10.00.053 A 150 FH X 15 FH
332A11-0460-03 (-)
POST MOD 0740659.
Check for absence of friction points.
Greasing.
GVI|LUB

62/10/00/000/000/140
Anti-vibrator assembly
MMA 62.10.00.053 A 150 FH X 15 FH
332A11-0460-04 (-)
POST MOD 0740663.
Check for absence of friction points without removal anti-vibrator assembly.
Greasing.
GVI|LUB

62/10/00/000/100/025
Main rotor blade
MMA 62.10.00.214 A 75 FH X 7 FH
62.10.00.214.001
Check of the leading edge and the blade tip cap.
GVI

62/10/00/211/001/001
Main rotor blade
MMA 62.10.00.211 A 750 FH X 75 FH
EXC. // 2Y X 73 D
62.10.00.211.012
EXC.
62.10.00.211.013
EXC.
62.10.00.211.018
EXC.
62.10.00.211.028
Check.
DI

AS 332 L2
05-20-00
2015.10.29 ATA 62 Page 2
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

62/10/00/211/012/000
Main rotor blade
MMA 62.10.00.211 A 1500 FH X 150 FH
62.10.00.211.012 // 2Y X 73 D
332A11-0040-00 (-)
332A11-0040-01 (-)
332A11-0041-00 (-)
332A11-0041-01 (-)
PRE MOD 0740629
Balance weight housing check.
DI

62/10/00/211/012/010
Main rotor blade
MMA 62.10.00.211 A 75 FH X 7 FH
62.10.00.211.012
332A11-0040-02 (-)
332A11-0040-03 (-)
332A11-0040-04 (-)
332A11-0040-05 (-)
332A11-0041-02 (-)
332A11-0041-03 (-)
332A11-0041-04 (-)
332A11-0041-05 (-)
POST MOD 0740629
Balance weight housing check.
DI

62/10/00/211/013/000
Main rotor blade
MMA 62.10.00.211 A 150 FH X 15 FH
62.10.00.211.013
Check.
DI

AS 332 L2
05-20-00
2015.10.29 ATA 62 Page 3
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

62/10/00/211/014/000
Main rotor blade
MMA 62.10.00.211 A 15 FH X 1 FH
62.10.00.211.002
62.10.00.211.014
62.10.00.211.018
62.10.00.211.027
62.10.00.211.028
Sand-laden and/or dust-laden atmosphere
Visual check for erosion.
In the event of intensive operation over very sandy and dusty ground, all necessary measures should be taken to
ensure optimum operation of the aircraft, including shorter checking intervals if applicable.
GVI

62/10/00/211/015/000
Main rotor blade
MMA 62.10.00.211 A 2Y X 73 D
62.10.00.211.015
Check.
DI

62/10/00/211/018/001
Main rotor blade
MMA 62.10.00.211 A 500 FH X 50 FH
62.10.00.211.018 // 2Y X 73 D
Check.
DI

62/10/00/211/018/002
Main rotor blade
MMA 62.10.00.211 A 75 FH X 7 FH
62.10.00.211.018
332A11-0040-03 (-)
332A11-0040-05 (-)
332A11-0041-03 (-)
332A11-0041-05 (-)
Check for and monitoring of spanwise crack on the stainless-steel leading-edge strips (item 6).
GVI

AS 332 L2
05-20-00
2015.10.29 ATA 62 Page 4
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

62-20 MAIN ROTOR SHAFT ASSEMBLY

62/20/00/000/000/005
Main rotor shaft
MMA 05.24.00.212 A 4Y X 146 D
05.24.00.212.001
Tropical and damp atmosphere
Salt-laden atmosphere
Operation to be carried out as from 8 Y after the first introduction to service or last Overhaul then every 4 Y.
DI

62/20/00/000/000/010
Main rotor shaft
MMA 05.24.00.212 A 6Y X 180 D
05.24.00.212.001
Normal climatic conditions
Operation to be carried out as from 12 Y after the first introduction to service or last Overhaul then every 6 Y.
DI

62/20/00/000/000/055
Rotor shaft
MMA 62.20.00.213 A 54 M X 162 D
62.20.00.213.008
Check with disassembly of the components.
DI

62/20/00/000/040/010
Flared casing
MMA 62.20.00.211 A 75 FH X 7 FH
62.20.00.211.033
Check for seepage.
GVI

62/20/00/000/040/020
Flared casing
MMA 62.20.00.211 A 75 FH X 7 FH
62.20.00.211.034
Visual check.
GVI

62/20/00/000/100/020
Rotor shaft
MMA 62.20.00.211 A 75 FH X 7 FH
62.20.00.211.009
Visual check.
GVI

AS 332 L2
05-20-00
2015.10.29 ATA 62 Page 5
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

62/20/00/000/100/030
Rotor shaft
MMA 62.20.00.211 A 75 FH X 7 FH
62.20.00.211.010
Visual inspection of the damper attachment pin and attachments bolts of the yokes.
GVI

62/20/00/000/100/040
Rotor shaft
MMA 62.20.00.211 A 750 FH X 75 FH
62.20.00.211.035 // 2Y X 73 D
Check.
GVI

62/20/00/000/700/000
MRH - Bonding braids
MMA 62.20.00.211 A 75 FH X 7 FH
62.20.00.211.014
Visual inspection.
GVI

62/20/00/000/700/010
MRH - Bonding braids
MMA 62.20.00.212 A 250 FH X 25 FH
62.20.00.212.009
Check the tightening torque.
TCK

62/20/00/000/700/020
Coning stop
MMA 62.20.00.211 A A ALF X 0A
62.20.00.211.020
Icing conditions.
Perform functional check.
DI

62/20/00/000/700/030
Coning stop
MMA 62.20.00.211 A 150 FH X 15 FH
62.20.00.211.020
Perform functional check.
DI

AS 332 L2
05-20-00
2015.10.29 ATA 62 Page 6
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

62/20/00/000/700/040
Coning stop
MMA 62.20.00.211 A 75 FH X 7 FH
62.20.00.211.021
Visual check.
GVI

62/20/00/000/700/050
Coning stop
MMA 62.20.00.213 A 750 FH X 75 FH
62.20.00.213.011
Check the play.
DI

62/20/00/000/700/060
Coning stop - Attachment to shaft
MMA 62.20.00.212 A 375 FH X 37 FH
62.20.00.212.010
PRE MOD 0743310.
Check the tightening torque.
TCK

62/20/00/000/700/065
Droop restrainer - Ring
MMA 62.20.00.215 A 375 FH X 37 FH
62.20.00.215.002
Lubrication.
LUB/SVC

62/20/00/000/700/070
Droop restrainer
MMA 62.20.00.211 A 75 FH X 7 FH
62.20.00.211.022
Visual check.
GVI

62/20/00/000/700/080
Droop restrainer
MMA 62.20.00.211 A 18 M X 54 D
62.20.00.211.023
Tropical and damp atmosphere
Salt-laden atmosphere
Sand-laden and/or dust-laden atmosphere
Visual check.
GVI

AS 332 L2
05-20-00
2015.10.29 ATA 62 Page 7
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

62/20/00/000/700/090
Droop restrainer - Ring
MMA 62.20.00.213 A 750 FH X 75 FH
62.20.00.213.012
Detailed check.
DI

62/20/00/100/000/030
Swashplate - Bellow
MMA 62.20.00.211 A 75 FH X 7 FH
62.20.00.211.030
Condition check.
GVI

62/20/00/211/019/000
Rotor RPM connector
MMA 62.20.00.211 A 75 FH X 7 FH
62.20.00.211.019
Check the connector and attachment.
GVI

62-21 MAIN ROTOR HUB

62/21/00/000/060/045
Spherical thrust bearing - Attachment to shaft
MMA 62.20.00.212 PO A 25 FH X 3 FH
62.20.00.212.013
Each time after the component is installed.
Readjustment of the tightening torque.
RTQ

62/21/00/000/600/025
Yoke, damper - Pins and bolts
MMA 62.20.00.212 PO A 10 FH X 2 FH
62.20.00.212.014
Each time after the component is installed.
Readjustment of the tightening torque.
RTQ

62/21/00/000/000/000
Blade horn
MMA 62.20.00.211 A 75 FH X 7 FH
62.20.00.211.004
Measure the play.
DI

AS 332 L2
05-20-00
2015.10.29 ATA 62 Page 8
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

62/21/00/000/000/010
Blade horn
MMA 62.20.00.213 A 54 M X 162 D
62.20.00.213.002
Check with removal.
DI

62/21/00/000/000/030
Blade horn - Attachment bolts
MMA 62.20.00.211 A 75 FH X 7 FH
62.20.00.211.005
Visual check.
GVI

62/21/00/000/000/040
Blade horn - Balljoints
MMA 62.20.00.212 A 150 FH X 15 FH
62.20.00.212.003
Check the tightening torque.
TCK

62/21/00/000/000/050
Blade horn - Attachment on blade sleeve
MMA 62.20.00.212 A 750 FH X 75 FH
62.20.00.212.004
Check the tightening torque.
TCK

62/21/00/000/000/060
Blade horn - Attachment on blade sleeve
MMA 62.20.00.213 A 54 M X 162 D
62.20.00.213.003
Check with disassembly.
DI

62/21/00/000/020/000
Blade sleeve
MMA 62.20.00.211 A 75 FH X 7 FH
62.20.00.211.008
Visual check (without disassembly).
GVI

62/21/00/000/020/005
Blade sleeve
MMA 62.20.00.213 A 54 M X 162 D
62.20.00.213.015
Check for corrosion.
DI

AS 332 L2
05-20-00
2015.10.29 ATA 62 Page 9
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

62/21/00/000/020/006
Blade sleeve
MMA 62.21.00.224 A 750 FH X 75 FH
62.21.00.224.001
332A31-1860-05 (-)
332A31-1860-06 (-)
Sleeve yoke, drag damper check.
DI

62/21/00/000/020/020
Blade attaching pins - Safety pin
MMA 62.20.00.213 A 750 FH X 75 FH
62.20.00.213.014
330A31-1375-20 (-)
332A31-2112-20 (-)
Check.
DI

62/21/00/000/020/025
Blade sleeve
MMA 62.20.00.213 A 750 FH X 75 FH
62.20.00.213.015
Check.
DI

62/21/00/000/020/070
Blade pin
MMA 62.20.00.213 A 750 FH X 75 FH
62.20.00.213.017
332A31-2115-20 (-)
332A31-2121-20 (-)
MARVAL X12.
Check.
DI

62/21/00/000/020/080
Blade pin
MMA 62.20.00.213 A 375 FH X 37 FH
62.20.00.213.019
Check and lubrication.
LUB

AS 332 L2
05-20-00
2015.10.29 ATA 62 Page 10
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

62/21/00/000/060/000
Spherical thrust bearing - Shoes
MMA 62.20.00.211 A 75 FH X 7 FH
62.20.00.211.002
Visual check.
GVI

62/21/00/000/060/010
Spherical thrust bearing - Pins
MMA 62.20.00.211 A 75 FH X 7 FH
62.20.00.211.003
Visual check.
GVI

62/21/00/000/060/020
Spherical thrust bearing - Pins
MMA 62.20.00.211 A 18 M X 54 D
62.20.00.211.003
Tropical and damp atmosphere
Salt-laden atmosphere
Sand-laden and/or dust-laden atmosphere
Check for corrosion.
GVI

62/21/00/000/060/030
Spherical thrust bearing - Pins
MMA 62.20.00.212 A 375 FH X 37 FH
62.20.00.212.001
Check the tightening torque.
TCK

62/21/00/000/060/035
Spherical thrust bearing - Pins
MMA 62.20.00.213 A 54 M X 162 D
62.20.00.213.001
Check with disassembly.
DI

62/21/00/000/060/040
Spherical thrust bearing - Attachment to shaft
MMA 62.20.00.212 A 750 FH X 75 FH
62.20.00.212.002
Check the tightening torque.
TCK

AS 332 L2
05-20-00
2015.10.29 ATA 62 Page 11
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

62/21/00/000/500/000
Pitch change rods
MMA 62.20.00.211 A 75 FH X 7 FH
62.20.00.211.006
Measure the play.
DI

62/21/00/000/500/010
Pitch change rods
MMA 62.20.00.211 A 18 M X 54 D
62.20.00.211.006
Tropical and damp atmosphere
Salt-laden atmosphere
Sand-laden and/or dust-laden atmosphere
Check for corrosion.
GVI

62/21/00/000/500/020
Pitch change rods
MMA 62.20.00.213 A 54 M X 162 D
62.20.00.213.004
Check with disassembly.
DI

62/21/00/000/500/030
Pitch change rods - Attachment bolts
MMA 62.20.00.211 A 75 FH X 7 FH
62.20.00.211.007
Visual check.
GVI

62/21/00/000/500/050
Pitch change rods - Attachment to blade horn and swashplate
MMA 62.20.00.212 A 750 FH X 75 FH
62.20.00.212.005
Check the tightening torque.
TCK

62/21/00/000/500/060
Pitch change rods - Attachment pins
MMA 62.20.00.213 A 54 M X 162 D
62.20.00.213.005
Check with removal.
DI

AS 332 L2
05-20-00
2015.10.29 ATA 62 Page 12
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

62/21/00/000/600/000
Damper
MMA 62.20.00.211 A 75 FH X 7 FH
62.20.00.211.017
Measure the play.
DI

62/21/00/000/600/010
Damper
MMA 62.20.00.211 A 75 FH X 7 FH
62.20.00.211.018
Check for oil seepage.
GVI

62/21/00/000/600/020
Damper - Sleeve attachment pins
MMA 62.20.00.211 A 75 FH X 7 FH
62.20.00.211.011
Visual check.
GVI

62/21/00/000/600/030
Damper yoke - Pins and bolts
MMA 62.20.00.212 A 375 FH X 37 FH
62.20.00.212.007
Check the tightening torque.
TCK

62/21/00/000/600/040
Damper - Attachment to sleeve
MMA 62.20.00.212 A 750 FH X 75 FH
62.20.00.212.008
Check the tightening torque.
TCK

62/21/00/000/600/070
Damper - Yoke - Pins
MMA 62.20.00.213 A 54 M X 162 D
62.20.00.213.009
Check with disassembly.
DI

62/21/00/000/600/080
Damper - Attachment to sleeve and yoke
MMA 62.20.00.213 A 750 FH X 75 FH
62.20.00.213.010
Check with removal.
DI

AS 332 L2
05-20-00
2015.10.29 ATA 62 Page 13
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

62-23 CONTROL SYSTEM

62/23/00/000/000/135
Fixed scissors - Balljoint
MMA 62.23.00.051 PO A 15 FH X 1 FH
62.23.00.421.002
MTC 20.02.05.404
Each time after the component is installed.
Readjustment of the tightening torque.
RTQ

62/23/00/000/000/137
Fixed scissors - Axis
MMA 62.23.00.051 PO A 15 FH X 1 FH
62.23.00.421.001
62.23.00.421.002
MTC 20.02.05.404
Each time after the component is installed.
Readjustment of the tightening torque.
RTQ

62/23/00/000/100/080
Swashplate - Bearing
MMA 62.20.00.215 PO A 3 FH X 12 FH
62.20.00.215.001
Greasing.
Operation to be carried out with each assembly of a new or revised MRH.
LUB

62/23/00/000/000/060
Scissors drive adapter
MMA 62.20.00.211 A 75 FH X 7 FH
62.20.00.211.024
Visual check.
GVI

62/23/00/000/000/070
Scissors coupling disk
MMA 62.20.00.211 A 18 M X 54 D
62.20.00.211.024
Tropical and damp atmosphere
Salt-laden atmosphere
Sand-laden and/or dust-laden atmosphere
Check for corrosion.
GVI

AS 332 L2
05-20-00
2015.10.29 ATA 62 Page 14
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

62/23/00/000/000/080
Fixed and rotating scissors
MMA 62.20.00.211 A 75 FH X 7 FH
62.20.00.211.026
Visual check.
GVI

62/23/00/000/000/090
Fixed and rotating scissors
MMA 62.20.00.213 A 750 FH X 75 FH
62.20.00.213.007 // 54 M X 162 D
Check with disassembly of the pins.
DI

62/23/00/000/000/100
Fixed and rotating scissors - Pins
MMA 62.20.00.212 A 750 FH X 75 FH
62.20.00.212.006
Check the tightening torque.
TCK

62/23/00/000/000/110
Fixed and rotating scissors - Hinge
MMA 62.20.00.213 A 750 FH X 75 FH
62.20.00.213.006
Check.
DI

62/23/00/000/000/120
Rotating scissors
MMA 62.20.00.211 A 75 FH X 7 FH
62.20.00.211.027
Visual check the attachment pins and slotted nuts.
GVI

62/23/00/000/000/130
Fixed scissors - Balljoint
MMA 62.20.00.212 A 750 FH X 75 FH
62.20.00.212.012
MTC 20.02.05.404
Check the tightening torque.
TCK

AS 332 L2
05-20-00
2015.10.29 ATA 62 Page 15
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

62/23/00/000/000/140
Fixed scissors
MMA 62.20.00.211 A 75 FH X 7 FH
62.20.00.211.028
Visual check the attachment pins and slotted nuts.
GVI

62/23/00/000/000/150
Rotating scissors/Scissors drive adapter
MMA 62.20.00.213 A 250 FH X 25 FH
62.20.00.213.018
Check and grease.
DI|LUB

62/23/00/000/100/020
Swashplate
MMA 62.20.00.211 A 75 FH X 7 FH
62.20.00.211.029
Visual check.
GVI

62/23/00/000/100/030
Swashplate
MMA 62.20.00.213 A 250 FH X 25 FH
62.20.00.213.013
332A31-2000-00 (-)
332A31-2000-01 (-)
Check.
DI

62/23/00/000/100/035
Swashplate
MMA 62.20.00.213 A 750 FH X 75 FH
62.20.00.213.013
332A31-2000-02 (-)
332A31-2000-03 (-)
332A31-2100-00 (-)
332A31-2100-01 (-)
POST MOD 0743714.
Check.
DI

AS 332 L2
05-20-00
2015.10.29 ATA 62 Page 16
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

62/23/00/000/100/040
Swashplate
MMA 62.20.00.211 A 54 M X 162 D
62.20.00.211.031
Visual check.
GVI

62/23/00/000/100/050
Fixed swashplate balljoint guide - Flared housing
MMA 62.20.00.212 A 375 FH X 37 FH
62.20.00.212.011
Check the tightening torque.
TCK

62/23/00/000/100/060
Swashplate - Bearing
MMA 62.20.00.215 A 250 FH X 25 FH
62.20.00.215.001
Greasing.
LUB

62/23/00/000/100/070
Swashplate - Balljoint and guide
MMA 62.20.00.214 A 750 FH X 75 FH
62.20.00.214.003
Check.
DI

62-24 DOME FAIRING

62/24/01/211/001/000
Dome fairing
MMA 62.24.01.211 A 75 FH X 7 FH
62.24.01.211.001
Visual check the exterior.
GVI

62/24/01/211/002/000
Dome fairing
MMA 62.24.01.211 A 750 FH X 75 FH
62.24.01.211.002
Perform detailed visual check.
GVI

AS 332 L2
05-20-00
2015.10.29 ATA 62 Page 17
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

62/24/01/212/001/000
Dome fairing
MMA 62.24.01.212 A 750 FH X 75 FH
62.24.01.212.001
Check the tightening torque and the condition of the attachments.
TCK|DI

62/24/01/213/001/000
Dome fairing
MMA 62.24.01.213 A 2250 FH X 225 FH
62.24.01.213.001
Detailed check.
DI

End of the Document Unit

AS 332 L2
05-20-00
2015.10.29 ATA 62 Page 18
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 63-ROTOR DRIVE (S)

63-11 MGB DRIVE SHAFT

63/11/00/000/000/005
Engine-MGB coupling shaft
MMA 05.24.00.212 A 4Y X 146 D
05.24.00.212.003
Tropical and damp atmosphere
Salt-laden atmosphere
Operation to be carried out as from 8 Y after the first introduction to service or last Overhaul then every 4 Y.
DI

63/11/00/000/000/009
Engine-MGB coupling shaft
MMA 05.24.00.212 A 6Y X 180 D
05.24.00.212.003
Normal climatic conditions
Operation to be carried out as from 12 Y after the first introduction to service or last Overhaul then every 6 Y.
DI

63/11/00/000/000/030
Engine-MGB coupling shaft
MMA 63.11.00.221 A 3000 FH X 300 FH
19E226-8A (704A33621004)
332A54-2012-00 (-)
332A54-2012-01 (-)
Detailed check.
DI

63-20 MAIN GEARBOX

63/20/00/000/000/005
MGB assembly
MMA 05.24.00.212 A 4Y X 146 D
05.24.00.212.002
Tropical and damp atmosphere
Salt-laden atmosphere
Operation to be carried out as from 8 Y after the first introduction to service or last Overhaul then every 4 Y.
DI

AS 332 L2
05-20-00
2016.07.18 ATA 63 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

63/20/00/000/000/009
MGB assembly
MMA 05.24.00.212 A 6Y X 180 D
05.24.00.212.002
Normal climatic conditions
Operation to be carried out as from 12 Y after the first introduction to service or last Overhaul then every 6 Y.
DI

63/20/00/000/000/040
MGB
MMA 63.20.00.211 A 75 FH X 7 FH
63.20.00.211.005
Tightness.
GVI

63/20/00/000/000/050
Magnetic plugs - Attachment
MMA 63.20.00.211 A 75 FH X 7 FH
63.20.00.211.062
Visual check.
GVI

63/20/00/000/000/060
Borescope plug - Attachment
MMA 63.20.00.211 A 250 FH X 25 FH
63.20.00.211.063
Readjustment of the tightening torque.
RTQ

63/20/00/000/000/070
Temperature probe
MMA 60.00.00.222 A 6Y X 180 D
60.00.00.222.002
Calibration check.
DRN|FT

63/20/00/000/000/080
Probe, thermostatic
MMA 60.00.00.222 A 6Y X 180 D
60.00.00.222.001
Check the setting.
DRN|FT

AS 332 L2
05-20-00
2016.07.18 ATA 63 Page 2
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

63/20/00/000/000/090
Pressure switch
MMA 60.00.00.221 A 6Y X 180 D
60.00.00.221.001
Check the setting.
DI

63/20/00/000/400/000
23000 rpm input - Tie rods
MMA 63.20.00.211 A 75 FH X 7 FH
63.20.00.211.044
Visual check without disassembly.
GVI

63/20/00/000/400/010
23000 rpm input - Cover attachment on casing
MMA 63.20.00.211 A 75 FH X 7 FH
63.20.00.211.049
Visual check.
GVI

63/20/00/000/700/000
Probe and sensors - Attachment
MMA 63.20.00.211 A 75 FH X 7 FH
63.20.00.211.058
63.20.00.211.059
63.20.00.211.060
Visual check.
GVI

63-21 MAIN REDUCTION GEAR

63/21/00/000/400/000
Engine-MGB coupling - Tie rods
MMA 63.21.00.224 PO A 3 FH X 7 FH
63.21.00.224.001
Each time after the component is installed.
Check the tightening torque to be done following installation of the engine or MGB.
TCK

63/21/00/000/000/000
Pressurized oilways - Attachment
MMA 63.20.00.211 A 75 FH X 7 FH
63.20.00.211.064
Visual check.
GVI

AS 332 L2
05-20-00
2016.07.18 ATA 63 Page 3
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

63/21/00/000/000/050
Torquemeter shaft - Attachment
MMA 63.20.00.211 A 75 FH X 7 FH
63.20.00.211.054
Visual check.
GVI

63/21/00/000/000/110
Bevel pinion
MMA 63.20.00.211 A 2Y X 73 D
63.20.00.211.067
Inspect for corrosion in area exposed to atmosphere.
DI

63/21/00/000/000/115
Bevel pinion
MMA 63.20.00.212 A 4Y X 146 D
63.20.00.212.003
Remove and check for corrosion.
DI

63/21/00/000/100/020
Main casing - Blanking parts and their attachments
MMA 63.20.00.211 A 750 FH X 75 FH
63.20.00.211.043
Check.
GVI

63/21/00/000/100/030
Main casing - Upper cover
MMA 63.20.00.211 A 75 FH X 7 FH
63.20.00.211.045
Condition check.
GVI

63/21/00/000/100/040
Main casing - Attachment to aft reduction gear cover
MMA 63.20.00.211 A 75 FH X 7 FH
63.20.00.211.050
Visual check.
GVI

AS 332 L2
05-20-00
2016.07.18 ATA 63 Page 4
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

63/21/00/000/100/050
Main housing - Chip detector
MMA 60.00.00.212 A 750 FH X 75 FH
60.00.00.212.005
Continuity check.
With electric indication.
FT

63/21/00/000/200/030
Servocontrol attachment
MMA 63.20.00.211 A 75 FH X 7 FH
63.20.00.211.047
Visual check.
GVI

63/21/00/000/200/040
Servocontrol mount
MMA 63.20.00.211 A 6Y X 180 D
63.20.00.211.066
Check.
GVI

63/21/00/000/300/000
Oil level sight glass
MMA 63.20.00.211 A 75 FH X 7 FH
63.20.00.211.002
Visual check the outside.
GVI

63/21/00/000/300/010
Oil level sight - Attachment
MMA 63.20.00.211 A 75 FH X 7 FH
63.20.00.211.057
Visual check.
GVI

63/21/00/000/300/020
Filler plug - Attachment
MMA 63.20.00.211 A 75 FH X 7 FH
63.20.00.211.055
Visual check.
GVI

AS 332 L2
05-20-00
2016.07.18 ATA 63 Page 5
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

63/21/00/000/300/030
Filler plug
MMA 63.20.00.211 A 75 FH X 7 FH
63.20.00.211.056
Visual check.
GVI

63/21/00/000/300/040
Filler plug - Strainer
MMA 63.20.00.211 A 750 FH X 75 FH
63.20.00.211.061
Perform detailed check.
GVI

63/21/00/000/300/050
Oil sump - Attachment to cover
MMA 63.20.00.211 A 750 FH X 75 FH
63.20.00.211.051
Check.
GVI

63/21/00/000/300/060
Main gear module
MMA 63.20.00.211 A 6Y X 180 D
63.20.00.211.065
Check for corrosion (general external inspection).
GVI

63-22 EPICYCLIC REDUCTION GEAR

63/22/00/000/000/040
Flared casing, cover, ring gear - Attachment
MMA 63.20.00.211 A 75 FH X 7 FH
63.20.00.211.052
Visual check.
GVI

63/22/00/520/212/100
Epicyclic reduction gear module – Chip detector
MMA 60.00.00.212 A 750 FH X 75 FH
60.00.00.212.007
Continuity check.
With electrical indication.
FT

AS 332 L2
05-20-00
2016.07.18 ATA 63 Page 6
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

63-23 ACCESSORY DRIVE GEARBOXES

63/23/01/000/000/010
Left hydraulic pump drive
MMA 63.20.00.212 A 250 FH X 25 FH
63.20.00.212.004
PRE MOD 0752464, 0752468 & 0752508
Detailed check.
DI

63/23/01/000/000/020
Left hydraulic pump drive
MMA 63.20.00.212 A 500 FH X 50 FH
63.20.00.212.004
POST MOD 0752464, 0752468 & 0752508
For aircrafts not fitted with HUMS.
Detailed check.
DI

63-24 MGB LUBRICATION SYSTEM

63/24/01/000/000/030
Filter - Filter element
MMA 63.20.00.211 A 150 FH X 15 FH
63.20.00.211.040
Check.
GVI

63/24/01/000/000/040
Oil filter - Safety pin
MMA 63.20.00.211 A 75 FH X 7 FH
63.20.00.211.042
Visual check.
GVI

63/24/01/000/000/050
Oil filter - Attachment to casing
MMA 63.20.00.211 A 75 FH X 7 FH
63.20.00.211.046
Visual check.
GVI

AS 332 L2
05-20-00
2016.07.18 ATA 63 Page 7
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

63/24/03/000/000/010
Oil cooler
MMA 63.24.03.101 A 100 FH X 10 FH
63.24.03.101.003
Salt-laden atmosphere
In case of low-altitude or hover flights, the interval of these operations is to be reduced
to the check after the last flight of the day.
Rinse.
CLN

63/24/03/000/000/020
Cooler
MMA 63.24.03.212 A 75 FH X 7 FH
63.24.03.212.004
Check for seepage.
GVI

63/24/03/000/000/030
Cooler
MMA 63.24.03.212 A 1500 FH X 150 FH
63.24.03.212.011
Check.
GVI

63/24/03/000/000/040
Cooler - Mount
MMA 63.24.03.212 A 75 FH X 7 FH
63.24.03.212.014
Visual check.
GVI

63/24/03/000/000/050
Cooler - Attachment screws
MMA 63.24.03.212 A 75 FH X 7 FH
63.24.03.212.015
Visual check.
GVI

63/24/03/000/000/060
Cooler - Attachment
MMA 63.24.03.213 A 1500 FH X 150 FH
63.24.03.213.001
Check the tightening torque.
TCK

AS 332 L2
05-20-00
2016.07.18 ATA 63 Page 8
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

63/24/03/000/000/070
Magnetic plugs
MMA 63.24.03.212 A 75 FH X 7 FH
63.24.03.212.005
Check.
GVI

63/24/03/000/000/080
Cooler, air system
MMA 63.24.03.101 A 3000 FH X 300 FH
63.24.03.101.001 // 6Y X 180 D
Cleaning.
CLN

63/24/03/000/000/090
Cooler, oil system
MMA 63.24.03.101 A 3000 FH X 300 FH
63.24.03.101.002 // 6Y X 180 D
Cleaning.
CLN

63/24/03/000/000/110
Fan drive shaft
MMA 63.24.04.821 A 15 Y X 180 D
Alignment check.
DI

63/24/03/000/100/002
Oil cooling system
MMA 63.24.03.211 A 750 FH X 75 FH
// 2Y X 73 D
Detailed check.
GVI

63/24/03/000/100/010
Fan
MMA 63.24.03.641 A 750 FH X 75 FH
// 2Y X 73 D
Oil draining/filling.
DRN

63/24/03/000/100/020
Fan
MMA 63.24.03.212 A 75 FH X 7 FH
63.24.03.212.001
Oil level check.
VC

AS 332 L2
05-20-00
2016.07.18 ATA 63 Page 9
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

63/24/03/000/100/030
Fan - Drain plug
MMA 63.24.03.212 A 75 FH X 7 FH
63.24.03.212.002
Check for seepage.
GVI

63/24/03/000/100/040
Fan - Rotor shaft
MMA 63.24.03.212 A 75 FH X 7 FH
63.24.03.212.003
Check for seepage.
GVI

63/24/03/000/100/050
Fan - Protective screen
MMA 63.24.03.212 A 75 FH X 7 FH
63.24.03.212.006
Visual check.
GVI

63/24/03/000/100/060
Fan - Rotor
MMA 63.24.03.212 A 75 FH X 7 FH
63.24.03.212.007
Visual check.
GVI

63/24/03/000/100/070
Fan - Bearing
MMA 63.24.03.212 A 750 FH X 75 FH
63.24.03.212.008
Sensitive check.
GVI

63/24/03/000/100/080
Fan - Attachment screws
MMA 63.24.03.212 A 75 FH X 7 FH
63.24.03.212.009
Visual check.
GVI

63/24/03/000/100/090
Fan
MMA 63.24.03.215 A 750 FH X 75 FH
63.24.03.215.001
Visual check.
GVI

AS 332 L2
05-20-00
2016.07.18 ATA 63 Page 10
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

63/24/03/000/100/100
Fan
MMA 63.24.03.751 A 750 FH X 75 FH
Vibration check without Steady Control.
GR

63/24/03/000/100/110
Fan
MMA 63.24.03.752 A 750 FH X 75 FH
Vibration check with Steady Control.
GR

63/24/03/000/200/000
Air system
MMA 63.24.03.212 A 750 FH X 75 FH
63.24.03.212.010
Visual check.
GVI

63/24/03/000/200/010
Sheath - Attachment screws
MMA 63.24.03.212 A 75 FH X 7 FH
63.24.03.212.012
Visual check.
GVI

63/24/03/000/200/020
Air system - Sheath and outlet duct
MMA 63.24.03.212 A 75 FH X 7 FH
63.24.03.212.013
Visual check.
GVI

63/24/03/000/300/010
Drive shaft - Rivets
MMA 63.24.03.212 A 750 FH X 75 FH
63.24.03.212.016
Visual check.
GVI

63/24/03/000/300/020
Flexible coupling
MMA 63.24.03.212 A 150 FH X 15 FH
63.24.03.212.017
Visual check.
GVI

AS 332 L2
05-20-00
2016.07.18 ATA 63 Page 11
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

63/24/03/000/300/030
Drive shaft
MMA 63.24.03.212 A 750 FH X 75 FH
63.24.03.212.018
Condition check.
GVI

63/24/03/000/300/040
Drive shaft - Coupling flanges
MMA 63.24.03.212 A 750 FH X 75 FH
63.24.03.212.019
Condition check.
GVI

63/24/03/000/300/050
Flexible coupling - Attachment
MMA 63.24.03.212 A 75 FH X 7 FH
63.24.03.212.020
Check.
GVI

63-25 ROTOR BRAKE

63/25/00/000/000/020
Rotor brake - Attachment to casing
MMA 63.20.00.211 A 75 FH X 7 FH
63.20.00.211.048
Visual check.
GVI

63/25/00/000/000/030
Rotor brake - Pads's jaws and disk
MMA 63.25.00.221 A 750 FH X 75 FH
63.25.00.221.001
Check wear.
DI

63/25/00/000/000/040
Rotor brake - Lower protector
MMA 63.25.00.221 A 1500 FH X 150 FH
63.25.00.211.004
Check.
GVI|CLN

AS 332 L2
05-20-00
2016.07.18 ATA 63 Page 12
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

63/25/00/000/000/050
Rotor brake
MMA 63.25.00.221 A 9000 FH X 300 FH
// 8Y X 180 D
Check.
DI

63/25/00/000/000/060
Rotor brake
MMA 63.25.00.721 A 9000 FH X 300 FH
// 8Y X 180 D
Adjustment - Test.
FT

63/25/00/000/000/070
Rotor brake
MMA 63.25.00.221 A 75 FH X 7 FH
63.25.00.211.002
POST MOD 0723738 & PRE MOD 0726696.
Visual check of the bush of the control handle.
GVI

63/25/00/000/000/080
Rotor brake - Lower protector
MMA 63.25.00.221 A 75 FH X 7 FH
63.25.00.211.001
Cleaning.
CLN

63-31 FLEXIBLE MOUNTING PLATE

63/31/00/000/000/050
Flexible mounting plate - Visible part
MMA 63.31.00.211 A 75 FH X 7 FH
63.31.00.211.001
Visual check.
GVI

63/31/00/000/000/060
MGB - Attachment to flexible mounting plate
MMA 63.20.00.211 A 500 FH X 50 FH
63.20.00.211.053
Check.
GVI

AS 332 L2
05-20-00
2016.07.18 ATA 63 Page 13
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

63/31/00/000/000/070
Flexible mounting plate
MMA 63.31.00.213 A 7500 FH X 300 FH
// 15 Y X 180 D
Check with removal.
DI

63/31/00/000/000/080
Flexible mounting plate
MMA 63.31.00.221 A 7500 FH X 300 FH
// 15 Y X 180 D
Dimensional control.
DI

63/31/00/000/000/090
Flexible mounting plate
MMA 63.31.00.222 A 7500 FH X 300 FH
// 15 Y X 180 D
Check of the seating plane.
DI

63-32 SUSPENSION BARS

63/32/00/000/000/080
MGB - Strut
MMA 63.32.00.211 A 75 FH X 7 FH
63.32.00.211.001
Visual check.
DI

63/32/00/000/000/090
MGB - Strut - Yoke - Balljoint
MMA 63.32.00.211 A 750 FH X 75 FH
63.32.00.211.002
Check.
DI

63/32/00/000/000/100
MGB - Strut - Attachment
MMA 63.32.00.211 A 750 FH X 75 FH
63.32.00.211.003
Check the pins.
DI

AS 332 L2
05-20-00
2016.07.18 ATA 63 Page 14
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

63/32/00/000/000/110
Suspension bars
MMA 63.32.00.212 A 9000 FH X 300 FH
// 15 Y X 180 D
Check with removal.
DI

63/32/00/000/000/115
MGB - Strut
MMA 63.32.00.211 A 12 Y X 180 D
63.32.00.211.004
X-ray inspection.
SDI

63-41 MGB INDICATION

63/41/00/000/000/000
MGB oil temperature
MMA 63.41.01.721 A 9000 FH X 300 FH
// 15 Y X 180 D
Indication test.
FT

63/41/00/000/000/010
MGB lubrication
MMA 63.41.02.721 A 9000 FH X 300 FH
63.41.02.721.001
PRE MOD 0726744
Oil pressure tests.
FT

63/41/00/000/000/015
MGB lubrication
MMA 63.41.02.721 A 9000 FH X 300 FH
63.41.02.721.002
POST MOD 0726744
Oil pressure tests.
FT

63/41/00/000/000/020
Rotor brake
MMA 63.41.03.721 A 9000 FH X 300 FH
// 15 Y X 180 D
Indication test.
FT

AS 332 L2
05-20-00
2016.07.18 ATA 63 Page 15
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

63/41/02/000/000/000
Dual threshold electronic unit
MMA 63.41.02.722 A 1200 FH X 120 FH
POST MOD 0726744
Tests.
FT

63-43 MGB - CHIP DETECTOR

63/43/00/000/000/000
MGB - Chip detector
MMA 63.43.00.721 A 9000 FH X 300 FH
// 15 Y X 180 D
Indication test.
FT

End of the Document Unit

AS 332 L2
05-20-00
2016.07.18 ATA 63 Page 16
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 64-TAIL ROTOR

64-00 TAIL ROTOR

64/00/00/000/000/000
Tail rotor
MMA 64.00.00.821 A 9000 FH X 300 FH
// 15 Y X 180 D
Balancing.
DI

64-11 TAIL ROTOR BLADES

64/11/00/000/000/040
Tail rotor blade
MMA 64.11.00.211 PO A 100 FH X 10 FH
64.11.00.211.002 // 1Y X 36 D
After the introduction to service of a new, overhauled or repaired component.
Blade inspection.
DI

64/11/00/000/000/020
Tail rotor blade
MMA 64.11.00.211 A 10 FH X 1 FH
64.11.00.211.003
Sand-laden and/or dust-laden atmosphere
Visual check for erosion.
In the event of intensive operation over very sandy and dusty ground, necessary measures should be taken
to ensure optimum operation of the aircraft, including shorter checking intervals, if applicable.
GVI

64/11/00/000/000/025
Tail rotor blade - Optional sand protection
MMA 64.11.00.211 A 10 FH X 1 FH
64.11.00.211.034
Sand-laden and/or dust-laden atmosphere
Visual check for erosion.
In the event of intensive operation over very sandy and dusty ground, necessary measures should be taken
to ensure optimum operation of the aircraft, including shorter checking intervals, if applicable.
GVI

AS 332 L2
05-20-00
2015.10.29 ATA 64 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

64/11/00/000/000/050
Tail rotor blade
MMA 64.11.00.211 A 750 FH X 75 FH
EXC. // 2Y X 73 D
64.11.00.211.018
EXC.
64.11.00.211.019
EXC.
64.11.00.211.021
332A12-0040-01 (-)
332A12-0040-03 (-)
332A12-0043-00 (-)
Detailed check.
DI

64/11/00/000/000/100
Tail rotor blade
MMA 64.11.00.211 A 4500 FH X 300 FH
64.11.00.211.018 // 3Y X 109 D
64.11.00.211.019
64.11.00.211.021
332A12-0040-01 (-)
332A12-0040-03 (-)
332A12-0043-00 (-)
Check.
DI

64-20 TAIL ROTOR POWER TRANSMISSION SYSTEM

64/20/00/000/000/020
Tail rotor transmission assy - Tail rotor shaft
MMA 05.24.00.212 PO A 12 Y X 180 D
05.24.00.212.007
332A36-3010-04 (-)
332A36-3010-05 (-)
332A36-3010-06 (-)
332A36-3010-07 (-)
Fitted on assemblies MP/N 332A36-3001-00 and MP/N 332A36-3002-00.
TSM or Overhaul.
To be carried out by an approved workshop or by an approved specialist assigned by Airbus Helicopters.
DI

AS 332 L2
05-20-00
2015.10.29 ATA 64 Page 2
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

64/20/00/000/000/030
TGB assembly
MMA 64.20.00.421 PO A 5 FH X 10 FH
64.20.00.421.001 & 100 FH X 10 FH
Each time after the component is installed.
Readjustment of the tightening torque on the attachment pins.
RTQ

64/20/00/000/000/036
TRH frequency adapter aft attachment yoke
MMA 64.20.00.352 PO A 75 FH X 7 FH
64.20.00.212.007
Check the tightening torque following compliance with the bonding procedure.
TCK

64/20/00/000/000/005
TGB assembly
MMA 05.24.00.212 A 4Y X 146 D
05.24.00.212.006
Tropical and damp atmosphere
Salt-laden atmosphere
Operation to be carried out as from 8 Y after the first introduction to service or last Overhaul then every 4 Y.
DI

64/20/00/000/000/009
TGB assembly
MMA 05.24.00.212 A 6Y X 180 D
05.24.00.212.006
Normal climatic conditions
Operation to be carried out as from 12 Y after the first introduction to service or last Overhaul then every 6 Y.
DI

64/20/00/000/000/110
Electrical bonding braids - Attachment
MMA 64.20.00.212 A 250 FH X 25 FH
64.20.00.212.006
Check the tightening torque.
TCK

64/20/00/000/000/120
Oil level sight
MMA 64.20.00.214 A 75 FH X 7 FH
64.20.00.214.002
Condition check.
GVI

AS 332 L2
05-20-00
2015.10.29 ATA 64 Page 3
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

64/20/00/000/000/130
Casing and cover
MMA 64.20.00.214 A 75 FH X 7 FH
64.20.00.214.004
Check for seepage without removal.
GVI

64/20/00/000/000/140
Filler port
MMA 64.20.00.214 A 75 FH X 7 FH
64.20.00.214.005
Check for seepage without removal.
GVI

64/20/00/000/000/150
Endoscope plug
MMA 64.20.00.214 A 75 FH X 7 FH
64.20.00.214.006
Check for seepage without removal.
GVI

64/20/00/000/000/160
Oil level sight
MMA 64.20.00.214 A 75 FH X 7 FH
64.20.00.214.007
Check for seepage without removal.
GVI

64/20/00/000/000/170
Oil temperature probe
MMA 64.20.00.214 A 75 FH X 7 FH
64.20.00.214.008
Check for seepage without removal.
GVI

64/20/00/000/000/180
Magnetic plug
MMA 64.20.00.214 A 75 FH X 7 FH
64.20.00.214.009
Check for seepage without removal.
GVI

AS 332 L2
05-20-00
2015.10.29 ATA 64 Page 4
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

64/20/00/000/000/190
Bearing retainer cover, casing and seal holder
MMA 64.20.00.214 A 75 FH X 7 FH
64.20.00.214.010
Check for seepage without removal.
GVI

64/20/00/000/000/200
Coupling flange with drive shaft - Centrifugal wheel nut
MMA 64.20.00.214 A 75 FH X 7 FH
64.20.00.214.011
Check for seepage without removal.
GVI

64/20/00/000/000/210
Particle detector, pitch change spider, sleeve and casing
MMA 64.20.00.214 A 75 FH X 7 FH
64.20.00.214.012
Check for seepage without removal.
GVI

64/20/00/000/000/220
Servocontrol
MMA 64.20.00.214 A 75 FH X 7 FH
64.20.00.214.013
Check for seepage without removal.
GVI

64/20/00/000/000/230
Input flange - Web
MMA 64.20.00.214 A 750 FH X 75 FH
64.20.00.214.014
Visual check.
GVI

64/20/00/000/000/240
Input flange
MMA 64.20.00.214 A 750 FH X 75 FH
64.20.00.214.015
Check locking of attachment hardware.
GVI

64/20/00/000/000/250
TGB input seal holder
MMA 64.20.00.214 A 75 FH X 7 FH
64.20.00.214.016
Visual check.
GVI

AS 332 L2
05-20-00
2015.10.29 ATA 64 Page 5
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

64/20/00/000/000/260
Cover and casing
MMA 64.20.00.214 A 75 FH X 7 FH
64.20.00.214.017
Visual check.
GVI

64/20/00/000/000/270
Borescope plug
MMA 64.20.00.214 A 75 FH X 7 FH
64.20.00.214.018
Visual check.
GVI

64/20/00/000/000/280
Filler port
MMA 64.20.00.214 A 75 FH X 7 FH
64.20.00.214.019
Visual check.
GVI

64/20/00/000/000/290
Filler port - Strainer
MMA 64.20.00.214 A 750 FH X 75 FH
64.20.00.214.020
Visual check.
GVI

64/20/00/000/000/300
TGB - Sleeve
MMA 64.20.00.214 A 54 M X 162 D
64.20.00.214.023
Visual check (section in contact with the atmosphere).
GVI

64/20/00/000/000/310
Control rod
MMA 64.20.00.214 A 9Y X 180 D
64.20.00.214.024
Check.
GVI

64/20/00/000/000/320
Control rod - Nut retainer
MMA 64.20.00.214 A 54 M X 162 D
64.20.00.214.025
Visual check.
GVI

AS 332 L2
05-20-00
2015.10.29 ATA 64 Page 6
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

64/20/00/000/000/330
TGB input
MMA 64.20.00.214 A 54 M X 162 D
64.20.00.214.026
Check for corrosion.
GVI

64/20/00/000/000/350
Ground braid
MMA 64.20.00.211 A 75 FH X 7 FH
64.20.00.211.011
Visual check.
GVI

64/20/00/000/000/360
Temperature probe
MMA 60.00.00.222 A 6Y X 180 D
60.00.00.222.002
Calibration check.
DRN|FT

64/20/00/000/100/080
Adapter - Balljoint
MMA 64.20.00.211 A 75 FH X 7 FH
64.20.00.211.013
Measure the play.
DI

64/20/00/000/100/090
Adapter - Attachment pins
MMA 64.20.00.211 A 75 FH X 7 FH
64.20.00.211.014
Visual check.
GVI

64/20/00/000/100/100
Adapter - Attachment pins
MMA 64.20.00.211 A 18 M X 54 D
64.20.00.211.014
Tropical and damp atmosphere
Salt-laden atmosphere
Sand-laden and/or dust-laden atmosphere
Check for corrosion.
GVI

AS 332 L2
05-20-00
2015.10.29 ATA 64 Page 7
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

64/20/00/000/100/110
Adapter - Attachment to blade and rotor shaft
MMA 64.20.00.212 A 750 FH X 75 FH
64.20.00.212.005
Check the tightening torque.
TCK

64/20/00/000/100/120
Adapter - Balljoint and yoke
MMA 64.20.00.213 A 750 FH X 75 FH
64.20.00.213.009
Check the end float on the balljoints and the tightening torque on the yoke/adapter attachment bolts.
DI|TCK

64/20/00/000/100/130
Adapter - Yoke
MMA 64.20.00.213 A 1750 FH X 175 FH
64.20.00.213.010
Detailed check.
DI

64/20/00/000/100/140
Adapter - Attachment
MMA 64.20.00.213 A 1750 FH X 175 FH
64.20.00.213.011
Detailed check.
DI

64/20/00/000/100/150
Adapter - Yoke
MMA 64.20.00.213 A 6Y X 180 D
64.20.00.213.012
Tropical and damp atmosphere
Salt-laden atmosphere
Check.
DI

64/20/00/000/100/170
Adapter - Yoke
MMA 64.20.00.213 A 12 Y X 180 D
64.20.00.213.012
Check.
DI

AS 332 L2
05-20-00
2015.10.29 ATA 64 Page 8
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

64/20/00/000/200/080
Spherical thrust bearing - Shoe
MMA 64.20.00.211 A 75 FH X 7 FH
64.20.00.211.002
Visual check.
GVI

64/20/00/000/200/090
Spherical thrust bearing
MMA 64.20.00.211 A 54 M X 162 D
64.20.00.211.003
Check for corrosion.
GVI

64/20/00/000/200/100
Spherical thrust bearing - Flange
MMA 64.20.00.211 A 75 FH X 7 FH
64.20.00.211.008
Visual check.
GVI

64/20/00/000/200/110
Spherical thrust bearing - Flange
MMA 64.20.00.212 A 750 FH X 75 FH
64.20.00.212.001
Check the tightening torque.
TCK

64/20/00/000/200/120
Spherical thrust bearing
MMA 64.20.00.213 A 1750 FH X 175 FH
64.20.00.213.001
Detailed check.
DI

64/20/00/000/300/040
Pitch change rod
MMA 64.20.00.211 A 75 FH X 7 FH
64.20.00.211.004
Perform detailed check and sensitive check of end float on balljoints.
DI

64/20/00/000/300/050
Pitch change rod - Attachment to pitch change spider
MMA 64.20.00.211 A 75 FH X 7 FH
64.20.00.211.005
Visual check.
GVI

AS 332 L2
05-20-00
2015.10.29 ATA 64 Page 9
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

64/20/00/000/300/060
Pitch change rod - Attachment to pitch change spider
MMA 64.20.00.211 A 18 M X 54 D
64.20.00.211.005
Tropical and damp atmosphere
Salt-laden atmosphere
Sand-laden and/or dust-laden atmosphere
Check for corrosion.
GVI

64/20/00/000/300/070
Pitch change rod - Yoke
MMA 64.20.00.211 A 75 FH X 7 FH
64.20.00.211.006
Visual check.
GVI

64/20/00/000/300/080
Pitch change rod - Attachment
MMA 64.20.00.212 A 375 FH X 37 FH
64.20.00.212.002
Check the tightening torque.
TCK

64/20/00/000/300/090
Pitch change rod - Yoke - Attachment to spherical thrust bearing
MMA 64.20.00.212 A 750 FH X 75 FH
64.20.00.212.003
Check the tightening torque.
TCK

64/20/00/000/300/100
Pitch change rod
MMA 64.20.00.213 A 1750 FH X 175 FH
64.20.00.213.002
Detailed check.
DI

64/20/00/000/300/110
Pitch change rod - Attachment
MMA 64.20.00.213 A 1750 FH X 175 FH
64.20.00.213.003
Check the bolts.
DI

AS 332 L2
05-20-00
2015.10.29 ATA 64 Page 10
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

64/20/00/000/300/120
Pitch change rod - Yoke
MMA 64.20.00.213 A 1750 FH X 175 FH
64.20.00.213.004
Detailed check.
DI

64/20/00/000/400/020
Pitch change spider
MMA 64.20.00.211 A 75 FH X 7 FH
64.20.00.211.010
Visual check.
GVI

64/20/00/000/400/030
Pitch change spider
MMA 64.20.00.213 A 1750 FH X 175 FH
64.20.00.213.008
Check with disassembly of the components.
DI

64/20/00/000/400/040
Pitch change spider/sleeve, bearing and splines
MMA 64.20.00.215 A 750 FH X 75 FH
64.20.00.215.001
Check the play.
DI

64/20/00/000/500/000
Blade - Attachment bolts
MMA 64.20.00.211 A 75 FH X 7 FH
64.20.00.211.007
Visual check.
GVI

64/20/00/000/500/010
Blade - Attachment bolts
MMA 64.20.00.212 A 375 FH X 37 FH
64.20.00.212.004
Check the tightening torque.
TCK

64/20/00/000/500/020
Blade - Attachment bolts
MMA 64.20.00.213 A 1750 FH X 175 FH
64.20.00.213.005
Detailed check.
DI

AS 332 L2
05-20-00
2015.10.29 ATA 64 Page 11
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

64/20/00/000/500/030
Blade - Attachment spacer
MMA 64.20.00.213 A 1750 FH X 175 FH
64.20.00.213.006
Detailed check.
DI

64/20/00/000/600/010
TRH shaft
MMA 64.20.00.211 A 75 FH X 7 FH
64.20.00.211.009
Visual check.
GVI

64/20/00/000/600/020
TRH shaft
MMA 64.20.00.213 A 1750 FH X 175 FH
64.20.00.213.007
Check with disassembly of the components.
DI

64/20/00/000/600/030
TRH shaft
MMA 64.20.00.213 A 4Y X 146 D
64.20.00.213.013
Check for corrosion with removal of elastomer extrusions.
DI

64/20/00/215/001/000
TGB
MMA 64.20.00.215 A 750 FH X 75 FH
64.20.00.215.002
Check the play.
DI

End of the Document Unit

AS 332 L2
05-20-00
2015.10.29 ATA 64 Page 12
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 65-TAIL ROTOR DRIVE

65-11 REAR TRANSMISSION

65/11/00/000/000/012
Tail rotor drive assy
MMA 05.24.00.212 A 4Y X 146 D
05.24.00.212.004
Tropical and damp atmosphere
Salt-laden atmosphere
Operation to be carried out as from 8 Y after the first introduction to service or
on-condition maintenance then every 4 Y.
DI

65/11/00/000/000/017
Tail rotor drive assy
MMA 05.24.00.212 A 6Y X 180 D
05.24.00.212.004
Normal climatic conditions
Operation to be carried out as from 12 Y after the first introduction to service or
on-condition maintenance then every 6 Y.
DI

65/11/00/000/000/160
Drive shaft bearing mount - Bearing
MMA 65.11.00.211 A 50 FH X 5 FH
65.11.00.211.001
Check for grease leakage.
VC

65/11/00/000/000/170
Elastomer damper base
MMA 65.11.00.211 A 750 FH X 75 FH
65.11.00.211.003
Visual check the attachments on the airframe and the condition of the elastomer in the dampers.
GVI

65/11/00/000/000/180
Forward bearing on structural support
MMA 65.11.00.211 A 75 FH X 7 FH
65.11.00.211.004
Visual check.
GVI

AS 332 L2
05-20-00
2016.07.18 ATA 65 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

65/11/00/000/000/190
Forward bearing
MMA 65.11.00.211 A 750 FH X 75 FH
65.11.00.211.005
Visual check.
GVI

65/11/00/000/000/200
Drive shaft
MMA 65.11.00.211 A 750 FH X 75 FH
65.11.00.211.006
Visual check.
DI

65/11/00/000/000/205
Third section equipped with phonic wheels
MMA 65.11.00.211 A 750 FH X 75 FH
65.11.00.211.014 // 2Y X 73 D
M'ARMS system's optional equipment.
Visual check.
GVI

65/11/00/000/000/210
Drive shaft - Flexible coupling
MMA 65.11.00.211 A 150 FH X 15 FH
65.11.00.211.007
Attachment check.
GVI

65/11/00/000/000/220
Adjusting shims and lock segments
MMA 65.11.00.211 A 750 FH X 75 FH
65.11.00.211.008
Visual check.
GVI

65/11/00/000/000/230
Balance weights
MMA 65.11.00.211 A 750 FH X 75 FH
65.11.00.211.009
Visual check.
GVI

AS 332 L2
05-20-00
2016.07.18 ATA 65 Page 2
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

65/11/00/000/000/240
Flange joint on shaft section
MMA 65.11.00.211 A 750 FH X 75 FH
65.11.00.211.010
Visual check.
GVI

65/11/00/000/000/250
Forward bearing - Spacer
MMA 65.11.00.211 A 750 FH X 75 FH
65.11.00.211.012
Check the play.
DI

65/11/00/000/000/260
Drive flange and tube
MMA 65.11.00.212 A 1500 FH X 150 FH
65.11.00.212.001
PRE MOD 0726718.
Detailed check.
DI

65/11/00/000/000/265
Drive flange and tube
MMA 65.11.00.212 A 1500 FH X 150 FH
65.11.00.212.003
POST MOD 0726718.
Detailed check.
DI

65/11/00/000/000/270
Shaft/Sleeve splines
MMA 65.11.00.213 A 750 FH X 75 FH
65.11.00.213.001
Check the play.
DI

65/11/00/000/000/280
Bearing block
MMA 65.11.00.213 A 1500 FH X 150 FH
65.11.00.213.002
65.11.00.213.003
Detailed check.
DI

AS 332 L2
05-20-00
2016.07.18 ATA 65 Page 3
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

65/11/00/000/000/290
Flexible coupling
MMA 65.11.00.214 A 750 FH X 75 FH
65.11.00.214.001
Readjustment of the tightening torque on the attachments.
RTQ

65/11/00/000/000/300
Drive shaft
MMA 65.11.00.221 A 15 Y X 180 D
Alignment check.
DI

65-30 INTERMEDIATE GEARBOX

65/30/00/000/000/090
IGB
MMA 65.30.00.051 PO A 5 FH X 10 FH
65.30.00.421.001 & 100 FH X 10 FH
Each time after the component is installed.
Readjustment of the tightening torque on the attachment pins.
RTQ

65/30/00/000/000/005
IGB assembly
MMA 05.24.00.212 A 4Y X 146 D
05.24.00.212.005
Tropical and damp atmosphere
Salt-laden atmosphere
Operation to be carried out as from 8 Y after the first introduction to service or last Overhaul then every 4 Y.
DI

65/30/00/000/000/009
IGB assembly
MMA 05.24.00.212 A 6Y X 180 D
05.24.00.212.005
Normal climatic conditions
Operation to be carried out as from 12 Y after the first introduction to service or last Overhaul then every 6 Y.
DI

65/30/00/000/000/100
IGB
MMA 65.30.00.211 A 75 FH X 7 FH
65.30.00.211.001
Check the oil level using the gauge.
GVI

AS 332 L2
05-20-00
2016.07.18 ATA 65 Page 4
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

65/30/00/000/000/110
IGB
MMA 65.30.00.211 A 75 FH X 7 FH
65.30.00.211.002
Condition check of the gauge safety pin and oil level gauge.
GVI

65/30/00/000/000/120
Oil level sight
MMA 65.30.00.211 A 75 FH X 7 FH
65.30.00.211.004
Check for seepage.
GVI

65/30/00/000/000/130
Gauge
MMA 65.30.00.211 A 75 FH X 7 FH
65.30.00.211.005
Check for seepage.
GVI

65/30/00/000/000/140
Cover and casing
MMA 65.30.00.211 A 75 FH X 7 FH
65.30.00.211.006
Check for seepage.
GVI

65/30/00/000/000/150
Temperature probe
MMA 65.30.00.211 A 75 FH X 7 FH
65.30.00.211.007
Check for seepage.
GVI|TCK

65/30/00/000/000/160
Chip detector
MMA 65.30.00.211 A 75 FH X 7 FH
65.30.00.211.008
Check for seepage.
GVI|TCK

AS 332 L2
05-20-00
2016.07.18 ATA 65 Page 5
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

65/30/00/000/000/170
Blank
MMA 65.30.00.211 A 75 FH X 7 FH
65.30.00.211.009
Check for seepage.
GVI|TCK

65/30/00/000/000/180
Borescope plug
MMA 65.30.00.211 A 75 FH X 7 FH
65.30.00.211.010
Check for seepage.
GVI

65/30/00/000/000/190
Filler cap
MMA 65.30.00.211 A 75 FH X 7 FH
65.30.00.211.011
Check for seepage.
GVI

65/30/00/000/000/200
Plug, nut and flange
MMA 65.30.00.211 A 75 FH X 7 FH
65.30.00.211.012
Check for seepage.
GVI

65/30/00/000/000/210
Seal holder and cover
MMA 65.30.00.211 A 75 FH X 7 FH
65.30.00.211.013
Check for seepage.
GVI

65/30/00/000/000/220
Attachment component
MMA 65.30.00.211 A 75 FH X 7 FH
65.30.00.211.014
Check.
TCK

AS 332 L2
05-20-00
2016.07.18 ATA 65 Page 6
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

65/30/00/000/000/230
Flange to pinion
MMA 65.30.00.211 A 750 FH X 75 FH
65.30.00.211.015
Check the safetying.
GVI

65/30/00/000/000/240
Input and output flange web
MMA 65.30.00.211 A 750 FH X 75 FH
65.30.00.211.016
Visual check.
GVI

65/30/00/000/000/250
Strainer
MMA 65.30.00.211 A 750 FH X 75 FH
65.30.00.211.017
Visual check.
GVI

65/30/00/000/000/260
Forward support
MMA 65.30.00.211 A 750 FH X 75 FH
65.30.00.211.018
Visual check.
GVI

65/30/00/000/000/270
Input or output IGB
MMA 65.30.00.211 A 6Y X 180 D
65.30.00.211.019
Check for corrosion (part outside casing).
DI

65/30/00/000/000/280
Casing and cover
MMA 65.30.00.211 A 6Y X 180 D
65.30.00.211.020
Check the external faces.
GVI

65/30/00/000/000/300
Temperature probe
MMA 60.00.00.222 A 6Y X 180 D
60.00.00.222.002
Calibration check.
DRN|FT

AS 332 L2
05-20-00
2016.07.18 ATA 65 Page 7
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

65-41 TGB INDICATING SYSTEM

65/41/00/000/000/000
Oil temperature indicator
MMA 65.41.00.721 A 9000 FH X 300 FH
// 15 Y X 180 D
Check.
FT

65-43 IGB INDICATING SYSTEM

65/43/00/000/000/000
Oil temperature indicator
MMA 65.43.00.721 A 9000 FH X 300 FH
// 15 Y X 180 D
Check.
FT

End of the Document Unit

AS 332 L2
05-20-00
2016.07.18 ATA 65 Page 8
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 67-ROTORS FLIGHT CONTROL

67-00 ROTORS FLIGHT CONTROL

67/00/00/000/000/000
Rotor flight control linkage
MMA 67.00.00.221 A 1500 FH X 150 FH
67.00.00.221.001 // 2Y X 73 D
Condition check.
DI

67/00/00/000/000/010
Rotor flight control linkage
MMA 67.00.00.221 A 1500 FH X 150 FH
67.00.00.221.002 // 2Y X 73 D
Checking controls in operation.
GVI

67/00/00/000/000/030
Rotor flight control linkage
MMA 67.00.00.221 A 1500 FH X 150 FH
67.00.00.221.004 // 2Y X 73 D
Inspection of end-fitting on forward quadrant.
DI

67/00/00/000/000/040
Tail servocontrol shaft lever connection
MMA 67.00.00.221 A 750 FH X 75 FH
67.00.00.221.003 // 2Y X 73 D
Detailed check.
GVI

67/00/00/520/221/100
Rotor flight control linkage
MMA 67.00.00.221 A 750 FH X 75 FH
67.00.00.221.007 // 1Y X 36 D
Salt-laden atmosphere
Condition check of the tail rotor control cables.
DI

67/00/00/520/221/200
Rotor flight control linkage
MMA 67.00.00.221 A 750 FH X 75 FH
67.00.00.221.007 // 2Y X 73 D
Condition check of the tail rotor control cables.
DI

AS 332 L2
05-20-00
2016.07.18 ATA 67 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

67-11 CYCLIC CONTROLS

67/11/00/000/000/000
Balance
MMA 67.11.00.821 A 9000 FH X 300 FH
// 15 Y X 180 D
Adjustment.
DI

67-12 COLLECTIVE CONTROLS

67/12/00/000/000/000
Balance
MMA 67.12.00.821 A 9000 FH X 300 FH
// 15 Y X 180 D
Check and adjustment.
DI

67/12/00/000/000/010
Elastic stop
MMA 67.12.00.822 A 15 Y X 180 D
Check and adjustment.
DI

67-14 MAIN ROTOR CONTROLS

67/14/00/000/000/000
Main rotor control
MMA 67.14.00.221 A 9000 FH X 300 FH
67.14.00.221.001 // 15 Y X 180 D
Check cyclic controls.
DI

67-20 TAIL ROTOR

67/20/00/000/000/030
Yaw control return to low pitch
MMA 67.20.00.831 A 1500 FH X 150 FH
67.20.00.831.003 // 2Y X 73 D
Check and adjustment.
DI

AS 332 L2
05-20-00
2016.07.18 ATA 67 Page 2
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

67-22 YAW CONTROL

67/22/00/000/000/020
Yaw damper
MMA 67.22.00.281 A 3000 FH X 300 FH
Check damper characteristics (torque/speed).
DI

67/22/00/000/000/030
Tail rotor return system
MMA 67.22.00.063 A 9000 FH X 300 FH
// 15 Y X 180 D
Check with removal.
DI

67/22/00/000/000/040
Forward quadrant
MMA 67.22.00.221 A 9000 FH X 300 FH
// 15 Y X 180 D
Check with removal of the forward quadrant.
DI

67/22/00/000/000/050
Aft quadrant
MMA 67.22.00.222 A 9000 FH X 300 FH
// 15 Y X 180 D
Check with removal of the rear quadrant.
DI

67/22/00/000/000/060
Yaw control
MMA 67.22.00.062 A 9000 FH X 300 FH
67.22.00.222.002 // 15 Y X 180 D
Check of the long rod.
DI

67/22/00/000/000/070
Yaw control
MMA 67.22.00.223 A 9000 FH X 300 FH
67.22.00.223.001 // 15 Y X 180 D
Check with directional control belcrank removal.
DI

AS 332 L2
05-20-00
2016.07.18 ATA 67 Page 3
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

67/22/00/000/000/080
Yaw control
MMA 67.22.00.224 A 9000 FH X 300 FH
67.22.00.224.001 // 15 Y X 180 D
Check with servocontrol input belcrank removal.
DI

67/22/00/000/000/090
Yaw control - Cables
MMA 67.22.00.061 A 15 Y X 180 D
704A34-1301-03 (704A34130103)
704A34-1301-04 (704A34130104)
704A34-1301-22 (704A34130122)
704A34-1301-23 (704A34130123)
Removal and replacement.
DI

67-30 SERVOCONTROLS
67/30/00/000/000/020
Main servocontrol - Attachment bolt
MTC 20.02.05.404 PO A 15 FH X 5 FH
332A31-1340-21 (-)
332A32-3206-20 (-)
Readjustment of the tightening torque after removal/installation.
RTQ

67/30/00/000/000/000
Main and tail servocontrol
MMA 67.30.00.222 A 1500 FH X 150 FH
// 2Y X 73 D
Detailed check.
DI

67/30/00/000/000/010
Main servocontrol - Attachment bolt
MMA 67.30.00.222 A 750 FH X 75 FH
67.30.00.222.001
332A31-1340-21 (-)
332A32-3206-20 (-)
Detailed check.
DI

AS 332 L2
05-20-00
2016.07.18 ATA 67 Page 4
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

67-31 MAIN SERVOCONTROLS

67/31/00/000/000/040
Main servocontrol - Anchor balljoint
MMA 67.30.00.221 A 1500 FH X 150 FH
67.30.00.221.001
Check the play.
DI

67/31/00/000/000/050
Main servocontrol - Anchor balljoint
MMA 67.30.00.221 A 6Y X 180 D
67.30.00.221.002
Check the swivel torque.
TCK

67-32 TAIL SERVOCONTROLS

67/32/00/000/000/020
Tail servocontrol - Input rod
MMA 67.30.00.222 A 500 FH X 50 FH
67.30.00.222.004
PRE MOD 0725752.
Check.
DI|FT

67/32/00/000/000/025
Tail servocontrol - Distributor horn
MMA 67.32.00.222 A 750 FH X 75 FH
Load test.
DI|FT

End of the Document Unit

AS 332 L2
05-20-00
2016.07.18 ATA 67 Page 5
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 71-POWER PLANT

71-00 POWER PLANT

71/00/00/000/000/000
Power plant
MMA 71.00.00.211 A 2Y X 73 D
Detailed check.
DI

71/00/00/000/000/010
MGB - Engine - Air intake alignment
MMA 71.00.00.821 A 9000 FH X 300 FH
// 15 Y X 180 D
Detailed check.
DI

71-40 ATTACHMENT FITTINGS

71/40/00/000/000/025
Attachment fitting
MMA 71.40.00.061 PO A 500 FH X 50 FH
Each time after the component is installed.
Check the tightening torque.
TCK

71/40/00/000/000/030
Attachment fitting
MMA 71.40.00.061 A 3000 FH X 300 FH
// 6Y X 180 D
Check the tightening torque.
TCK

End of the Document Unit

AS 332 L2
05-20-00
2012.11.29 ATA 71 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 72-ENGINE

72-11 SEALING FLANGE

72/11/00/000/000/100
Inflatable seal on engine side
MMA 72.11.00.201 A 750 FH X 75 FH
72.11.00.201.001 // 2Y X 73 D
Detailed check.
DI

End of the Document Unit

AS 332 L2
05-20-00
2012.11.29 ATA 72 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 76-ENGINE CONTROLS

76-00 ENGINE CONTROLS

76/00/00/000/000/000
Teleflex control
MMA 76.00.00.281 A 750 FH X 75 FH
76.00.00.641.001 // 3Y X 109 D
Greasing.
LUB

76-11 FUEL FLOW CONTROL

76/11/00/000/000/000
Quadrant control and fuel flow control
MMA 76.11.00.211 A 750 FH X 75 FH
Check.
Helicopter used for training purposes.
GVI

76/11/00/000/000/020
Quadrant control and fuel flow control
MMA 76.11.00.211 A 3000 FH X 300 FH
// 9Y X 180 D
Check.
GVI

76/11/00/000/000/030
Ball end-fittings
MMA 76.11.00.213 A 750 FH X 75 D
L'HOTELLIER.
Detailed check.
DI

76-12 ANTICIPATOR
76/12/00/000/000/020
Anticipator
MMA 76.12.00.721 A 9000 FH X 300 FH
// 15 Y X 180 D
Tests.
FT

AS 332 L2
05-20-00
2015.10.29 ATA 76 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

76-20 EMERGENCY SHUT-DOWN

76/20/00/000/000/010
Fuel shut-off and general cut-out control
MMA 76.20.00.211 A 750 FH X 75 FH
76.20.00.211.001 // 2Y X 73 D
76.20.00.211.002
76.20.00.211.003
Check.
DI|FT

76/20/00/000/000/030
Fuel shut-off and general cut-out control
MMA 76.20.00.821 A 750 FH X 75 FH
76.20.00.821.003
Function test.
DI|FT

76/20/00/000/000/040
Fuel shut-off and general cut-out control
MMA 76.20.00.821 A 9000 FH X 300 FH
// 15 Y X 180 D
Adjustment.
DI

76/20/00/000/000/050
Fuel shut-off control
MMA 76.20.00.212 A 4Y X 146 D
Check and greasing tangentiel unit.
DI|LUB

76/20/00/000/000/060
General cut-out handle
MMA 76.20.00.063 A 15 Y X 180 D
Removal and replacement .
DI

End of the Document Unit

AS 332 L2
05-20-00
2015.10.29 ATA 76 Page 2
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 77-ENGINE INDICATING

77-11 ENGINE ROTATION SPEED MONITORING

77/11/00/000/000/000
Tachometer, Ng, Nf
MMA 77.11.00.721 A 9000 FH X 300 FH
// 15 Y X 180 D
Testing with test set.
FT

77/11/00/000/000/010
Tachometer, Ng, Nf
MMA 77.11.00.721 A 1500 FH X 150 FH
77.11.00.721.003
POWER LOSS board test.
FT

77-12 TORQUE MONITORING

77/12/00/000/000/000
Torquemeter channel
MMA 77.12.00.721 A 9000 FH X 300 FH
// 15 Y X 180 D
Test and adjustment.
FT

77/12/00/000/000/010
Torquemeter
MMA 77.12.00.722 A 9000 FH X 300 FH
// 15 Y X 180 D
Testing with test set.
FT

77-21 T4 TEMPERATURE
77/21/00/000/000/000
T4 line
MMA 77.21.00.721 A 9000 FH X 300 FH
// 15 Y X 180 D
Test.
FT

AS 332 L2
05-20-00
2012.11.29 ATA 77 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

77/21/00/000/000/010
T4 temperature
MMA 77.21.00.722 A 9000 FH X 300 FH
// 15 Y X 180 D
Testing with test set.
FT

77-31 CHIP DETECTOR

77/31/00/000/000/000
Magnetic plug
MMA 77.31.00.721 A 9000 FH X 300 FH
// 15 Y X 180 D
Test.
FT

77-32 OEI DETECTION

77/32/00/000/000/000
OEI detection
MMA 77.32.00.751 A 9000 FH X 300 FH
// 15 Y X 180 D
Test.
FT

End of the Document Unit

AS 332 L2
05-20-00
2012.11.29 ATA 77 Page 2
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 79-ENGINE OIL

79-30 INDICATION
79/30/00/000/000/000
Engine lubrication
MMA 79.30.00.751 A 9000 FH X 300 FH
// 15 Y X 180 D
Oil pressure and temperature checks.
FT

End of the Document Unit

AS 332 L2
05-20-00
2012.11.29 ATA 79 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 80-ENGINE STARTING

80-11 STARTING SYSTEM CONTROLS AND INDICATORS

80/11/00/000/000/000
Starting system
MMA 80.11.00.211 A 6Y X 180 D
Check.
GVI

End of the Document Unit

AS 332 L2
05-20-00
2012.11.29 ATA 80 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 93-MONITORING SYSTEM

93-71 MONITORING SYSTEM

93/71/00/000/000/000
FLIR installation
MMA 93.71.03.721 A 75 FH X 7 FH
U7000.
Functional test.
FT

End of the Document Unit

AS 332 L2
05-20-00
2012.11.29 ATA 93 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 28-FUEL

28-20 FUEL SUPPLY

28/20/00/000/000/035
Fuel tanks - Fuel contamination
MTC 20.08.06.401

Measurement to be taken following repeated filter clogging.

28/20/00/000/000/080
Filter - Filter element
CMM 28.99.99

Replacement of the cartridge after clogging at temperatures above 0°C.

End of the Document Unit

AS 332 L2
05-50-00
2012.11.29 ATA 28 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 30-ICE AND RAIN PROTECTION

30-21 OPT - AIR INTAKE HEATED MAT

30/21/00/000/000/000
Heating mats
CMM 30.29.95

Monitor the separated areas on the air intake stubframe heating mats.
Total separated surface area per mat greater than 120 cm2: Immediate repair; helicopter grounded.

30/21/00/000/000/010
Heating mats
CMM 30.29.95

Monitor the separated areas on the air intake stubframe heating mats.
Total separated surface area per mat lower than or equal to 120 cm2: repair to be performed within the next 10 FH.
Flight in icing conditions prohibited.

30/21/00/000/000/020
Heating mats
CMM 30.29.95

Monitor the separated areas on the air intake stubframe heating mats.
Total separated surface area per mat lower than or equal to 50 cm2: repair to be performed within the next 50 FH.

End of the Document Unit

AS 332 L2
05-50-00
2012.11.29 ATA 30 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 32-LANDING GEAR

32-71 TAIL BUMPER

32/71/00/000/000/000
Tail skid
MMA 32.71.00.221
32.71.00.221.002
Clearance check following tail skid contact with ground or in case of difficulties in tail rotor tuning.

End of the Document Unit

AS 332 L2
05-50-00
2012.11.29 ATA 32 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 62-ROTOR (S)

62-10 MAIN ROTOR BLADES

62/10/00/211/000/000
Main rotor blade
MMA 62.10.00.211

Accelerated monitoring for modification follow-up.

Check of the blade and follow-up of damages every 100 FH, during 200 FH.
If no changes are found, return to the normal inspection cycle.

End of the Document Unit

AS 332 L2
05-50-00
2013.12.12 ATA 62 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 63-ROTOR DRIVE (S)

63-21 MAIN REDUCTION GEAR

63/21/00/063/000/000
23000 rpm input
MMA 63.21.00.063 A 10 FH X 0A
Replacement of the seal.
Type B1 measures as per MMA 05.53.00.217 § 3.2.3.2.
To be performed within 10 FH.

63/21/00/063/000/010
23000 rpm input
MMA 63.21.00.063 A 6 FH X 0A
Replacement of the seal.
Type B2 measures as per MMA 05.53.00.217 § 3.2.3.2.
To be performed within 6 FH.

63-25 ROTOR BRAKE

63/25/00/000/000/010
Rotor brake
CMM 63.29.06
Chap. TESTING
§5
If the braking time is greater than 15 seconds, wait for 5 minutes and then apply the brake again.
If the braking time is still greater than 15 seconds, follow the directives given in the CMM.

End of the Document Unit

AS 332 L2
05-50-00
2016.07.18 ATA 63 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 64-TAIL ROTOR

64-11 TAIL ROTOR BLADES

64/11/00/000/000/030
Tail rotor blade
MMA 64.11.00.211
64.11.00.211.002
Accelerated monitoring for modification follow-up.
Check of the blade and follow-up of damages every 100 FH, during 200 FH.
If no changes are found, return to the normal inspection cycle.

64-20 TAIL ROTOR POWER TRANSMISSION SYSTEM

64/20/00/000/200/130
Spherical thrust bearing
MMA 64.20.00.065

Replacement in case of crack on the fins.

To be performed within 25 FH.

End of the Document Unit

AS 332 L2
05-50-00
2013.12.12 ATA 64 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

ATA 53-FUSELAGE

53-21 PRIMARY STRUCTURE

53/21/02/211/000/020
Canopy structure
MMA 53.21.02.211 A 15 FH X 1 FH
53.21.02.211.002
If there is a crack corresponding to the criteria given in the sub-task 53.21.02.211.002:
check for non-propagation of the crack.
GVI

53-25 TAIL STRUCTURE

53/25/01/052/000/010
Tail boom frame - Friction mark
MRS 53.25.01, 03 PO A 150 FH X 15 FH
Visual check.
VC

53/25/01/052/000/020
Tail boom frame - Scratch
MRS 53.25.01, 04 PO A 150 FH X 15 FH
Visual check.
VC

53/25/01/052/000/030
Tail boom frame - Crack
MRS 53.25.01, 02 A ALF A X 0A
Visual check during the first 75 FH, until permanent repair.
VC

53/25/01/052/000/040
Tail boom frame - Crack
MRS 53.25.01, 02 A 75 FH X 7 FH
Visual check, until permanent repair.
VC

53/25/01/052/000/050
Tail boom frame - Damage to inboard edge of frame
MRS 53.25.01, 05 A 450 FH X 45 FH
Visual check.
VC

AS 332 L2
05-52-00
2013.12.12 ATA 53 Page 1
 MSM

Task Number
Documentation Interval Margin
Description/Remarks

53/25/01/052/000/060
Tail boom frame - Corrosion
MRS 53.25.01, 06 A 6M X 18 D
Visual check.
VC

53/25/01/052/000/070
Tail boom frame - Corrosion
MRS 53.25.01, 06 A 2M X 6D
Tropical and damp atmosphere
Salt-laden atmosphere
Visual check.
VC

53/25/01/052/000/080
Tail boom frame - Impact mark and dent
MRS 53.25.01, 07 A 150 FH X 15 FH
Visual check.
VC

End of the Document Unit

AS 332 L2
05-52-00
2013.12.12 ATA 53 Page 2