PATTERN

PILOT OUTFIT
(CROCHET)
 TOOLS AND MATERIALS
-COCHET HOOK №2 (US B)
-Scissors
-Needle with wide eye

For overall
YarnART jeans yarn №82 (50g/160m)-1 skein (dark green)
buttons -2 pc

For glasses
YarnART jeans yarn №76 (50g/160m)-1 skein (light blue)

For hat
Alize «ANGORA REAL 40» yarn №182 (100g/480m)-dark grey -1 skein

For boots
Alize «ANGORA REAL 40» yarn №182 (100g/480m)-dark grey
YarnART jeans yarn №76 (50g/160m)-1 skein (light blue)

For jacket
Alize Softi Plus yarn № 296 (grey) 100g/120m
Zipper (optional)
buckles -2pc (optional)

For plane
YarnART jeans yarn №46 (50g/160m)-1 skein (grey)
Toy stuffing
5mm eyes (half beads)-2pc (optional)

YarnArt Jeans can be substituted with any yarn with similar meterage, which is number 3 in
Standart Yarn Weight System (Fingering or Baby yarn)
 ABBREVIATIONS

SC-single crochet
DEC- decrease
INC-increase
st, sts - stitc, stitches
ch-chain
sl st-slip stitch
tch-turning chain
MR-magic ring
dc-double crochet

In this pattern we use US terminology.

 HELLO!
My name is Svetlana.
ATTENTION!
This pattern is my design and it’s copyrighted.
Full or partial copying, reselling or sharing it with other people are
PROHIBITED!
Buying this pattern doesn’t give You the right to publish it in
Internet or to resell it to other people. The copyright infringement is
the breaking the law stated in the articles 1229 and 1270 and it
carries the liability under the article 1301 of the Civil Code of Russian
Federation.
THANK YOU FOR YOUR UNDERSTANDING AND RESPECT!
HAT
 Make ch 78
This chain should necessarily be equal the bear’s head circumference.
If your chain is not , then you need to add chains, but pay attention that the total number of
stitches must be a multiple of 6.

R1-12-sc all across the round=78

Make the openings for ears

R13-25sc, ch7, skip 7 stitches on the hat ,14sc, ch7, skip 7 stitches, 25sc=78

It is important to check if the openings fit the bear’s ears. If the ears are wider, then make one
more chain and count the stitches.
R14-27-sc all across the round=78
R28-(11sc,1dec)*6=72
R29-(10sc,1dec)*6=66
R30-(9sc,1dec)*6=60
R31-(8sc,1dec)*6=54
R32-(7sc,1dec)*6=48
R33-(6sc,1dec)*6=42
R34-(5sc,1dec)*6=36
R35-(4sc,1dec)*6=30
R36-(1sc,1dec)*10=20
R37-10dec=10
R38-5dec=5
R39-dec all across the round
Cut the thread, weave in the thread end using a needle.
 Ear flaps on the hat.
Put the hat on the bear and mark where the first ear will be located.

R1-2-15sc=15
R3-1dec, 11sc, 1dec=13
R4-sc all across the row=13
R5-1dec, 9sc,1dec=11
R6- sc all across the row-11
R7-1dec ,7sc, 1dec=9
R8-1dec ,5sc,1dec=7
R9-1dec,3sc, 1dec=5
R10-1dec,1sc,1dec=3
R11-1dec ,1sc=2-make a chain starting from these two stitches , make ch 20-25 approximately.

Crochet 20-25sc along this chain until you meet the ear flap
Crochet along the ear edges, don’t cut the thread
Crochet sc along the hat edge until you meet the second ear.
The second ear is crocheted in the same way.
To find the point where we should start the second ear, just fold the hat in half so that two
openings meet each other and you understand where we should start. So we will get the equal
distance between the ears.

Crochet sc along the bottom edge of the hat and crochet sc along the ear flaps too.
 GLASSES

25sc in MR
Don’t pull the magic ring tightly.
R1-crochet 25 sc into back loops=25 sts
R2-3sc
Turn (I make a turning ch at the end of every row)
R3-3sc
turn
R4-3sc
turn
R5-3sc
Join the second circle with 3sc
Make the second circle in the same way as we have made the first one

CROCHET THE STRAPS FOR THE GLASSES

On one side of each circle crochet :

R1-5sc (I make a turning ch at the end of every row)
turn and make a turning ch after every row.
R2-5sc
R3-1dec,1sc,1dec=3
R4-40-sc all across the row= 3

The straps should be easily tied on the bear’s head.

Crochet in grey color across the rounds where we have crocheted into back loops only (the
thread which was used for the hat crocheting)-25 sl st (slip stitch) into front loops.
BOOTS
 Make chain 8.
Work in light blue color.
Crochet in rounds, working along the chain.
Make slip stitch and tch at the end of every round, but it’s not necessarily. You can just
crochet in non-joining rounds.
R1- start from the second ch, 1inc, 5sc, 4sc into one chain, 5sc, 1inc=18
R2-1inc, 6sc, 4inc, 6sc, 1inc=24
R3- 1inc, 9sc,1inc ,2sc, 1inc, 9sc ,1inc=28
R4-(3sc, 1inc)*7=35
R5-sc all across the round=35
R6-(4sc,1inc)*7=42
R7-sc all across the round=42

Turn inside out and crochet into back loops across the wrong side
R8-42sc (into back loops)

Cut the thread , change to grey color.

R8 (into front loops)-42sc
 R9-14-sc all acros the round=42
R15-15sc ,(1dec, 1sc)*4, 15sc=38
R16-15sc,4dec,15sc=34

Divide the stitches into back part and tongue.

Crochet the back side

R17-12sc
Turn the work after every row
R18-26-24sc
Cut the thread

Crochet the tongue

R17-10sc
Turn the work after every row
R18-26-sc all across the row=10

Insert the laces into the boot with a needle.

Make lacing to your liking.
Crochet the second boot in the same way.
Overall
 MAKE CHAIN 38
Put the chain on the bear to see if it fits him. The chain ends should freely meet each other
around the bear’s foot. If they don’, then make several chains more.
Join the chain and crochet in rounds
R1-22-38sc

The first leg is finished.

Cut the thread and crochet the second leg in th same way as we did with the first one.

Join the legs.

R23-38sc, ch10, 38sc

Crochet in rounds.
Crochet along both sides of the chain.
Crochet in rounds.
R24-54-sc all across the round=92

The overall should be necessarily put on the bear while crocheting.

 Crochet the front side of the overall.
Fold the overall in half and crochet 30 middle stitches in turning rows
Don’t crochet in rounds, turn the work after every row
R55-30sc
R56-1dec, 26sc ,1dec=28
R57-28sc
R58-1dec, 24sc ,1dec=26
R59-26sc
R60-1dec, 22sc ,1dec=24
R61-sc all across the row=24
R62-1dec , 20sc, 1dec=22
R63-sc all across the row=22
R64-1dec, 18sc,1dec=20
R65-sc all across the row=20
Cut the thread and weave in the thread end with a needle.

Crochet the straps

Attach the thread to the back side of the overall at any point and crochet one strap at first :
R1-40-3sc (turn after every row)
R41 -ch5 , join with sc
Cut the thread and weave in the thread end with a needle.

Crochet the second strap in the same way.

Sew two buttons to the front part.
PILOT’S JACKET
 Make chain 90.
R1-16-90sc (turn after every row)
THE CHAIN SHOILD BE NECESSARILY PUT ON THE TOY WHILE
CROCHETING
Crochet the back part.
R17-65sc
Turn
R18-33-40sc (turn after every row)
R34-35sc
Turn
R35-30sc
Cut the thread.

Front right forepart.

Skip 3 stitches on the main fabric and attach the thread.
R18-32 -22sc
R33-18sc
R34-14sc
R35-7sc

The front left forepart is crocheted in the same way.

Join the back and front foreparts and sew or crochet sc across
both foreparts along the shoulder line.
Start to crochet sc around the sleeves holes -34sc
Crochet in rounds.
R1-15-sc all across the round=34
R16-(5sc,1dec)*4, 6sc=30
R17-22-(4sc,1dec)*5=25
R23-27-sc all across the round

Change to grey thread Alize Softi Plus

R28-sc all across the round=25

The second sleeve is crocheted in the same way.

 Collar

Work with Alize Softi Plus yarn.

R1-Crochet into front loops only -38sc
R2-5-sc all across the round=38

Cut the thread and weave in the thread end with a needle

If you are not going to make half-belts, then just crochet sc along
the bottom edge of the jacket with the thread ALIZE

HALF-BELTS AND BUCKLES

Crochet along the jacket bottom edge with the same thread,
which was used for the jacket crocheting:
R1-20sc, ch8=27
R2 -7sc (crochet along the chain), 20sc
R3-27sc
Change to Alize Softi Plus yarn
R4-27sc

Crochet along the second side in the same way.

Add the buckle and sew with a needle.
Buckle fastening on the belt.
 Middle part on the jacket for a buckle.
Skip 5 sts on the first part of the belt with a buckle on the jacket
bottom line and crochet:
R1-40sc, ch8=47
R2-7sc along the chain, 40sc, ch8=54
R3-54sc

Change to the yarn Alize Softi Plus

R4-54sc
Cut the thread and sew the half-belts at another side of the
fastening.
The bottom of the jacket is finished.
 SEW THE ZIPPER

You should use a zipper for the jacket as the fastening, which consists of two
parts .
Just put a zipper to the jacket and sew with regular stitches. To make it carefully
fold the edges and iron them.
 POCKETS

Pockets are crocheted in a very simple way .

Work with alize yarn.
Insert the crochet hook at the wrong side of the jacket into the point where
the pocket will be, yarn over and crochet through the fabric, work sl st and
crochet 5 sl sts.(insert the hook into the jacket fabric, yarn over at the wrong
side and bring out at the right side, work sl st)
Cut the thread - leave a thread tail to crochet 5sc
Pull the thread to the right side and crochet in reverse direction -5sc
Cut the thread and weave in the tail using a needle.
Crochet the second pockets in the same way (if you want to make the
second one).
PLANE
 MR-6sc
R1-6inc=12
R2-12sc
R3-(1sc,1inc)*6=18
R4-18sc
R5-(2sc,1inc)*6=24
R6-24sc
R7-(3sc,1inc)*6=30
R8-30sc
R9-(4sc,1inc)*6=36
R10-36sc
R11-(5sc,1inc)*6=42
R12-42sc
R13-24-42sc
R25-(5sc,1dec)*6=36
R26-27-36sc
R28-(4sc,1dec,)*6=30
R29-30-30sc
R31-(3sc,1dec)*6=24
R32-33-24sc
R34-(2sc,1dec)*6=18

Stuff the toy

R35-36-18sc
R37-(1sc,1dec)*6=12
R38-dec all across the round and continue making decreases until
the opening is closed,
Cut the thread and weave in the thread end inside of the toy using
a needle.
 Wings
MR-6sc
R1-6inc=12
R2-(1sc,1inc)*6=18
R3-(2sc,1inc)*6=24
R6-14-24sc
R15-(10sc,1dec)*2=22
R16-18-sc all across the round=22
R19-(9sc,1dec)*2=20
R20-20sc
Cut the thread with necessary length, we will use this thread to sew
the wings to the plane body.
The second wing is crocheted in the same way.

Tail
MR-6sc
R1-6inc=12
R2-(1sc,1inc)*6=18
R3-(2sc,1inc)*6=24
R6-9-24sc
R10-(10sc,1dec)*2=22
R11-22sc
Cut the thread leaving a tail of necessary length, we will use this
thread to sew the tail to the plane body.
 Gears
MR-6sc
R1-6inc=12
R2-(1sc,1inc)*6=18
R3-(2sc,1inc)*6=24
R6-24sc
R7-8-crochet into back loops only - 24sc
R9-dec all across the round
R10 -dec all across the round and continue making decreases until the
opening is closed.
Cut the thread leaving a thread with necessary length, we will use it for
sewing the gears .
Sew or glue the gears to the plane sides at any spaces.

Sew the wings and the tail.

Sew to any points you like closer to the nose. I sewn exactly after the
decreases. Sew the lower part of the wing into both loops of the
stitches, inserting the needle into the stitch on the wing and into the
stitch on the plane body. STUFF THE WING WITH THE STUFFING
MATERIAL JUST A LITTLE. And sew the upper part into the front loops
only. So the seams will look neater.
Sew the tail at the back of the body, exactly in the middle. IT ALSO
SHOULD BE STUFFED. Sew in a round , inserting the needle into front
loops of the stitches on the tail.
 Propeller
MR-6sc
R1-6inc=12
R2-6sc,ch8, crochet along the chain -5dc,2sc, 6sc, ch8-crochet along
the chain-5dc,2sc
Cut the thread and use it to sew the propeller to the plane nose. Or
you can glue it with the hot glue.

You can also glue or sew the beads-eyes of the plane.

And embroider the cabin window with regular stitches.
THANK YOU FOR
PURCHASE.