0% found this document useful (0 votes)
181 views2 pages

JEA Steel Industries, Inc

Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
181 views2 pages

JEA Steel Industries, Inc

Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

are light steel frames made of galvanized iron used for ceiling and drywall assemblies.

JEA­MAXX Furring JEA­MAXX C­Channel JEA­MAXX Wall Angle

Click image to enlarge Click image to enlarge Click image to enlarge

This is installed to the ceiling with Attached perpendicularly to JEA­ Attached to the perimeter wall by a concrete nail or any
maximum interval of 24" or 610mm MAXX fastening materials. It carries the end of JEA­MAXX Furring
with size of 19mm (3/4") x 50mm (2") Furring Channnel with maximum Channel and end of boards with size of 25mm (1") x 25mm
x 5m (16 ft) interval of 4ft or 1220mm with (1") x 2.40mm (8ft)
standard size of 12mm (1/2") x 38mm
with: (1 1/2") x 5m (16ft) with thickness:

GA 26/0.40mm with: GA 26/0.40mm


GA 25/0.50mm GA 25/0.50mm
GA 24/0.60mm GA 22/0.80mm GA 24/0.60mm
GA 20/1.00mm GA 22/0.80mm
GA 18/1.20mm (For Special Fabrication,
5 to 7 days)

Batten Double U­Clip

Click image to enlarge Click image to enlarge

with thickness: with:

GA 26/0.40mm double clip


GA 25/0.50mm single clip
GA 24/0.60mm

Rod Joiner Suspension Clip

Click image to enlarge Click image to enlarge


Attached to the JEA­MAXX Carrying Attached to the JEA­MAXX Carrying
Channel with maximum interval of 4ft Channel with maximum interval of 4ft
(1220mm) (1220mm)

JEA­MAXX Tracks JEA­MAXX Studs

Click image to enlarge Click image to enlarge

Placed on the floor by a concrete nail, tox Installed vertically inside the tracks
or any fastening material with size of by studs screw or blind rivets with
35mm (1 3/8) x 76mm (3") and standard maximum spacing of 610mm (24").
length of 2.44m (8ft) to 3.0m (10ft) It also holds the boards.

with: Size varies from 51mm (2"), 64mm


(2 1/2"), 76mm (3"), 92mm (3
35mm x 51mm, GA 25/0.50mm 1/2"), 102mm (4") with lenght of
64mm, 92mm, GA 24/0.60mm 24mm (8 ft)
102mm GA 22/0.80mm
50mm x 75mm, GA 20/1.00mm with:
100mm, 150mm 50mm x 75mm GA 25/0.50mm
50mm x GA
100mm 24/0.60mm
50mm x GA
150mm 22/0.80mm
GA
20/1.00mm

Drive Pins Studs Screw Text Screw

Click image to enlarge Click image to enlarge Click image to enlarge

Rivets Jezza Mesh Tape

Click image to enlarge Click image to enlarge

< back

You might also like