Product datasheet

Specifications

variable speed drive, Altivar

Process ATV600, ATV630, 55kW,
75hp, 380 to 480V, IP21, UL type
1
ATV630D55N4

Main
Range of product Altivar Process ATV600

product or component type Variable speed drive

Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
Product specific application Process and utilities

Device short name ATV630

variant Standard version

product destination Asynchronous motors

Synchronous motors

EMC filter Integrated with 150 m conforming to EN/IEC 61800-3 category C3

IP degree of protection IP21 conforming to IEC 61800-5-1

IP21 conforming to IEC 60529

[Us] rated supply voltage 380...480 V

Degree of protection UL type 1 conforming to UL 508C

Type of cooling Forced convection

Supply frequency 50...60 Hz - 5...5 %

[Us] rated supply voltage 380...480 V - 15...10 %

Motor power kW 55 kW (normal duty)

45 kW (heavy duty)

Motor power hp 75 hp normal duty

60 hp heavy duty

Line current 97.2 A at 380 V (normal duty)

84.2 A at 480 V (normal duty)
81.4 A at 380 V (heavy duty)
71.8 A at 480 V (heavy duty)

Prospective line Isc 50 kA

Apparent power 70 kVA at 480 V (normal duty)

59.7 kVA at 480 V (heavy duty)

Continuous output current 106 A at 2.5 kHz for normal duty

88 A at 2.5 kHz for heavy duty

Asynchronous motor control Constant torque standard

profile Variable torque standard
Optimized torque mode

Synchronous motor control profile Permanent magnet motor

Synchronous reluctance motor

Speed drive output frequency 0.1…500 Hz

Nominal switching frequency 2.5 kHz

Switching frequency 2.5...8 kHz with derating factor

2...8 kHz adjustable

14-Jul-2024 1
Safety function STO (safe torque off) SIL 3

Discrete input logic 16 preset speeds

Communication port protocol Ethernet

Modbus serial
Modbus TCP

Option card Slot A: communication module, Profibus DP V1

Slot A: communication module, PROFINET
Slot A: communication module, DeviceNet
Slot A: communication module, Modbus TCP/EtherNet/IP
Slot A: communication module, CANopen daisy chain RJ45
Slot A: communication module, CANopen SUB-D 9
Slot A: communication module, CANopen screw terminals
Slot A/slot B: digital and analog I/O extension module
Slot A/slot B: output relay extension module
Slot A: communication module, Ethernet IP/Modbus TCP/MD-Link
Communication module, BACnet MS/TP
Communication module, Ethernet Powerlink

Complementary
mounting mode Wall mount

Maximum transient current 116.6 A during 60 s (normal duty)

132 A during 60 s (heavy duty)

Network number of phases 3 phases

Discrete output number 0

Discrete output type Relay outputs R1A, R1B, R1C 250 V AC 3000 mA
Relay outputs R1A, R1B, R1C 30 V DC 3000 mA
Relay outputs R2A, R2C 250 V AC 5000 mA
Relay outputs R2A, R2C 30 V DC 5000 mA
Relay outputs R3A, R3C 250 V AC 5000 mA
Relay outputs R3A, R3C 30 V DC 5000 mA

Output voltage <= power supply voltage

Permissible temporary current 1.1 x In during 60 s (normal duty)

boost 1.5 x In during 60 s (heavy duty)

Motor slip compensation Not available in permanent magnet motor law

Can be suppressed
Automatic whatever the load
Adjustable

Acceleration and deceleration Linear adjustable separately from 0.01...9999 s

ramps
Physical interface Ethernet
2-wire RS 485

Braking to standstill By DC injection

Protection type Thermal protection: motor

Safe torque off: motor
Motor phase break: motor
Thermal protection: drive
Safe torque off: drive
Overheating: drive
Overcurrent between output phases and earth: drive
Overload of output voltage: drive
Short-circuit protection: drive
Motor phase break: drive
Overvoltages on the DC bus: drive
Line supply overvoltage: drive
Line supply undervoltage: drive
Line supply phase loss: drive
Overspeed: drive
Break on the control circuit: drive

Transmission rate 10, 100 Mbits

4800 bps, 9600 bps, 19200 bps, 38.4 Kbps

Frequency resolution Display unit: 0.1 Hz

Analog input: 0.012/50 Hz

2 14-Jul-2024
Transmission frame RTU

Electrical connection Control: removable screw terminals 0.5...1.5 mm²/AWG 20...AWG 16

Line side: screw terminal 70...120 mm²/AWG 1/0...250 kcmil
Motor: screw terminal 70...120 mm²/AWG 1/0...250 kcmil

Connector type RJ45 (on the remote graphic terminal) for Ethernet/Modbus TCP
RJ45 (on the remote graphic terminal) for Modbus serial

Data format 8 bits, configurable odd, even or no parity

Type of polarization No impedance

Exchange mode Half duplex, full duplex, autonegotiation Ethernet/Modbus TCP

Number of addresses 1…247 for Modbus serial

Method of access Slave Modbus TCP

Supply External supply for digital inputs: 24 V DC (19…30 V), <1.25 mA, protection type:
overload and short-circuit protection
Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10
mA, protection type: overload and short-circuit protection
Internal supply for digital inputs and STO: 24 V DC (21…27 V), <200 mA, protection
type: overload and short-circuit protection

Local signalling 3 LEDs for local diagnostic

3 LEDs (dual colour) for embedded communication status
4 LEDs (dual colour) for communication module status
1 LED (red) for presence of voltage

Width 290 mm

Height 922 mm

Depth 323 mm

net weight 56.5 kg

Analogue input number 3

Analogue input type AI1, AI2, AI3 software-configurable voltage: 0...10 V DC, impedance: 31.5 kOhm,
resolution 12 bits
AI1, AI2, AI3 software-configurable current: 0...20 mA, impedance: 250 Ohm,
resolution 12 bits
AI2 voltage analog input: - 10...10 V DC, impedance: 31.5 kOhm, resolution 12 bits

Discrete input number 8

Discrete input type DI7, DI8 programmable as pulse input: 0…30 kHz, 24 V DC (<= 30 V)

Input compatibility DI1...DI6: discrete input level 1 PLC conforming to EN/IEC 61131-2
DI5, DI6: discrete input level 1 PLC conforming to IEC 65A-68
STOA, STOB: discrete input level 1 PLC conforming to EN/IEC 61131-2

Discrete input logic Positive logic (source) (DI1...DI8), < 5 V (state 0), > 11 V (state 1)
Negative logic (sink) (DI1...DI8), > 16 V (state 0), < 10 V (state 1)

Analogue output number 2

Analogue output type Software-configurable voltage AQ1, AQ2: 0...10 V DC impedance 470 Ohm,
resolution 10 bits
Software-configurable current AQ1, AQ2: 0...20 mA, resolution 10 bits
Software-configurable current DQ-, DQ+: 30 V DC
Software-configurable current DQ-, DQ+: 100 mA

Sampling duration 2 ms +/- 0.5 ms (DI1...DI4) - discrete input

5 ms +/- 1 ms (DI5, DI6) - discrete input
5 ms +/- 0.1 ms (AI1, AI2, AI3) - analog input
10 ms +/- 1 ms (AO1) - analog output

Accuracy +/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input
+/- 1 % AO1, AO2 for a temperature variation 60 °C analog output

Linearity error AI1, AI2, AI3: +/- 0.15 % of maximum value for analog input
AO1, AO2: +/- 0.2 % for analog output

Relay output number 3

14-Jul-2024 3
Relay output type Configurable relay logic R1: fault relay NO/NC electrical durability 100000 cycles
Configurable relay logic R2: sequence relay NO electrical durability 100000 cycles
Configurable relay logic R3: sequence relay NO electrical durability 100000 cycles

Refresh time Relay output (R1, R2, R3): 5 ms (+/- 0.5 ms)

Minimum switching current Relay output R1, R2, R3: 5 mA at 24 V DC

Maximum switching current Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 250 V AC
Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 30 V DC
Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250
V AC
Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V
DC

Isolation Between power and control terminals

Maximum output frequency 500 kHz

Maximum input current 97.2 A

Variable speed drive application Building - HVAC compressor centrifugal

selection Food and beverage processing other application
Mining mineral and metal fan
Mining mineral and metal pump
Oil and gas fan
Water and waste water other application
Building - HVAC screw compressor
Food and beverage processing pump
Food and beverage processing fan
Food and beverage processing atomization
Oil and gas electro submersible pump (ESP)
Oil and gas water injection pump
Oil and gas jet fuel pump
Oil and gas compressor for refinery
Water and waste water centrifuge pump
Water and waste water positive displacement pump
Water and waste water electro submersible pump (ESP)
Water and waste water screw pump
Water and waste water lobe compressor
Water and waste water screw compressor
Water and waste water compressor centrifugal
Water and waste water fan
Water and waste water conveyor
Water and waste water mixer

Motor power range AC-3 55…100 kW at 380…440 V 3 phases

55…100 kW at 480…500 V 3 phases

Quantity per set 1

enclosure mounting Wall mounted

Environment
Insulation resistance > 1 MOhm 500 V DC for 1 minute to earth

Noise level 62.4 dB conforming to 86/188/EEC

Power dissipation in W Natural convection: 131 W at 380 V, switching frequency 2.5 kHz
Forced convection: 917 W at 380 V, switching frequency 2.5 kHz

Volume of cooling air 295 m3/h

Operating position Vertical +/- 10 degree

Maximum THDI <48 % from 80...100 % of load conforming to IEC 61000-3-12

Electromagnetic compatibility Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
Radiated radio-frequency electromagnetic field immunity test level 3 conforming to
IEC 61000-4-3
Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6

Pollution degree 2 conforming to EN/IEC 61800-5-1

Vibration resistance 1.5 mm peak to peak (f= 2…13 Hz) conforming to IEC 60068-2-6
1 gn (f= 13…200 Hz) conforming to IEC 60068-2-6

4 14-Jul-2024
Shock resistance 15 gn for 11 ms conforming to IEC 60068-2-27

Relative humidity 5…95 % without condensation conforming to IEC 60068-2-3

Ambient air temperature for -15…50 °C (without derating)

operation 50…60 °C (with derating factor)

Ambient air temperature for -40…70 °C

storage
Operating altitude <= 1000 m without derating
1000...4800 m with current derating 1 % per 100 m

Product certifications CSA

UL
DNV-GL
ATEX INERIS
ATEX zone 2/22
TÜV

marking CE

Standards UL 508C
EN/IEC 61800-3
EN/IEC 61800-3 environment 1 category C2
EN/IEC 61800-3 environment 2 category C3
EN/IEC 61800-5-1
IEC 61000-3-12
IEC 60721-3
IEC 61508
IEC 13849-1

Overvoltage category III

Regulation loop Adjustable PID regulator

Noise level 62.4 dB

Pollution degree 2

Packing Units
Unit Type of Package 1 PCE

Number of Units in Package 1 1

Package 1 Height 47.0 cm

Package 1 Width 43.0 cm

Package 1 Length 110.0 cm

Package 1 Weight 64.0 kg

14-Jul-2024 5
Sustainability
Green PremiumTM label is Schneider Electric’s commitment to delivering products with best-in-
class environmental performance. Green Premium promises compliance with the latest regulations,
transparency on environmental impacts, as well as circular and low-CO2 products.
Guide to assessing product sustainability is a white paper that clarifies global eco-label
standards and how to interpret environmental declarations.
Learn more about Green Premium arrow2_right
Guide to assess a product’s sustainability arrow2_right

Transparency RoHS/REACh

Resource performance

 Upgraded Components Available

Well-being performance

 Mercury Free

 Rohs Exemption Information Yes

Certifications & Standards

Reach Regulation REACh Declaration

Eu Rohs Directive Pro-active compliance (Product out of EU RoHS legal scope)

China Rohs Regulation China RoHS declaration

Environmental Disclosure Product Environmental Profile

Weee The product must be disposed on European Union markets following specific waste
collection and never end up in rubbish bins

Circularity Profile End of Life Information

6 14-Jul-2024
Product datasheet ATV630D55N4

Dimensions Drawings

Dimensions

Drives with IP21 Top Cover

Front and Left Views

Drives Without IP21 Top Cover

Left and Rear Views

14-Jul-2024 7
Product datasheet ATV630D55N4

8 14-Jul-2024
Product datasheet ATV630D55N4

Mounting and Clearance

Clearances

X1 X2 X3

≥ 100 mm (3.94 in.) ≥ 100 mm (3.94 in.) ≥ 10 mm (0.39 in.)

14-Jul-2024 9
Product datasheet ATV630D55N4

Mounting Types

Mounting Type A: Individual IP21

a ≥ = 110 mm (4.33 in.)

Mounting Type B: Side by Side IP20 (Possible, 2 Drives Only)

Mounting Type C: Individual IP20

10 14-Jul-2024
Product datasheet ATV630D55N4

a ≥ = 110 mm (4.33 in.)

14-Jul-2024 11
Product datasheet ATV630D55N4

Connections and Schema

Three-Phase Power Supply with Upstream Breaking via Line Contactor

Connection diagrams conforming to standards EN 954-1 category 1 and IEC/EN 61508 capacity SIL1, stopping
category 0 in accordance with standard IEC/EN 60204-1

(1) Line choke if used

(2) Use relay R1 set to operating state Fault to switch Off the product once an error is detected.
A1 : Drive
KM1 : Line Contactor
Q2, Q3 : Circuit breakers
S1, S2 : Pushbuttons
T1 : Transformer for control part

12 14-Jul-2024
Product datasheet ATV630D55N4

Three-Phase Power Supply with Downstream Breaking via Contactor

Connection diagrams conforming to standards EN 954-1 category 1 and IEC/EN 61508 capacity SIL1, stopping
category 0 in accordance with standard IEC/EN 60204-1

(1) Line choke if used

(2) Use relay R1 set to operating state Fault to switch Off the product once an error is detected.
A1 : Drive
KM1 : Contactor

14-Jul-2024 13
Product datasheet ATV630D55N4

Control Block Wiring Diagram

(1) Safe Torque Off

(2) Analog Output
(3) Digital Input
(4) Reference potentiometer
(5) Analog Input
R1A, R1B, R1C : Fault relay
R2A, R2C : Sequence relay
R3A, R3C : Sequence relay

Sensor Connection
It is possible to connect either 1 or 3 sensors on terminals AI2 or AI3.

14 14-Jul-2024
Product datasheet ATV630D55N4

Sink / Source Switch Configuration

The switch is used to adapt the operation of the logic inputs to the technology of the programmable controller outputs.

• Set the switch to Source (factory setting) if using PLC outputs with PNP transistors.
• Set the switch to Ext if using PLC outputs with NPN transistors.

Switch Set to SRC (Source) Position Using the Output Power Supply for the Digital Inputs

Switch Set to SRC (Source) Position and Use of an External Power Supply for the DIs

Switch Set to SK (Sink) Position Using the Output Power Supply for the Digital Inputs

Switch Set to EXT Position Using an External Power Supply for the DIs

14-Jul-2024 15
Product datasheet ATV630D55N4

Performance Curves

Derating Curves

40 °C (104 °F) - Mounting type A, B and C

50 °C (122 °F) - Mounting type A, B and C
60 °C (140 °F) - Mounting type B and C
In : Nominal Drive Current
SF : Switching Frequency

16 14-Jul-2024