MX Series
Intelligent Fire Alarm Systems
MX100
INTELLIGENT ADDRESSABLE
OPTICAL SMOKE DETECTOR
1330b-(cl-1)
Features and Benefits
EN54-7:2000 +A1:2002 +A2:2006 Compliance
LPCB Approved
Using microprocessor technology with memory capacity up to 10 events
Analogue sending and digital addressing Provide real time algorithm to
the control panel Smart linear drift compensation
Onsite adjustable parameter
360-degree visual indicator
Removable chamber against dust and small insect
Ancillary remote indicator output
Aesthetically pleasing design
Overview
The MX100 Intelligent Addressable Optical Smoke Detector is the ideal device for most applications,
due to its spiffing linear response to a wide variety of different types of smoke patterns. The
detector sensitivity is manufactured to the requirement of EN 54 part 7, European Standard. It is
aesthetically pleasing with unobtrusive design that will complement modern building designs. The
unit incorporates an intelligent processor that provides Algorithm map, inbuilt A/D converter, Drift
compensation, and Self-Diagnosis and History log.
Secure and speedy communication through the on-board processor enables the detector to make its
own decision, resulting in greater automation. In the event of fire, the integral microprocessor
analyses the signal according to factors such as signal strength and rate of increase, then confirms
these patterns with the pre - programmed fire scenarios and smoke patterns, for a faster and safer
response. Once it is confirmed, the LED indicates the sensor status and concurrently transmit
communication signal to the Control Panel. The MX100 detector is compatible to the MX Series
Analogue Intelligent Fire Alarm Control Panel, produced by single manufacturer, to avoid any
compatibility problem.
Multron Systems Pte Ltd DATA SHEET
217 Kallang Bahru, Multron Building Copyright © The information contained in this
Data Sheets remains the property of Multron
Singapore 339 347 Systems Pte Ltd, and is not to be altered or
: (65) 6395 6868 reproduce without permission.
Multron reserves the right to change any
: (65) 6395 6869 specification without prior notice.
: info @ [Link] Version : 31-03-2018
MX Series
Intelligent Fire Alarm Systems
Technical Specification
LPCB / CE-CPR
Listed Compliance
EN54-7:2000 +A1:2002 +A2:2006
Input Voltage 24VDC [16V to 28V]
Current Consumption Standby : 0.6mA Alarm : 4mA
Protocol / Addressing Proprietary Value range from 1 to 254
Sensitivity As per stipulated standard
Indicator Single LED, 360-degree Visual
Material / Colour ABS, White Glossy finishing
Dimension Ø 99.7mm x 57mm Height
Weight 145g (with Base) 90g (without Base)
Operating Temperature -10°C to +50°C
Humidity 0 to 95% Relative Humidity, Non condensing
Ingress Protection IP42
Terminal Description
1 Signal In (+)
2 Signal Out (+)
3 Remote Indicator (+)
4 Remote Indicator (+)
5 Signal In (-)
6 Signal In (-)
7 Remote Indicator (-)
8 Remote Indicator (-)
