Galvanized pipes

Galvanizing is by hot-dipping in Marking

a completely automated plant Marking in black paint every
in compliance with the UNI EN 40 cm with the following:
10240 norm, which stipulates TenarisDalmine senza piombo
various levels of quality lead free
depending on the pipe EN 10255 SL1 EN 10240 A.1
application. TenarisDalmine senza piombo
Galvanizing carried out by lead free
Tenaris conforms to level A.1, EN 10255 SM EN 10240 A.1
qualitatively the highest
required by the European
standards. SL1 light seamless tube series
The zinc used is an electrolytic SM medium seamless tube series
type, with 99.995% purity.
Galvanized TenarisDalmine
pipes employing the new ‘lead-
free galvanizing’ technology
conform to the EN 10240-A1
DVGW-Registrierungsbescheid norm and the Department of
für Erzeugnisse der Wasserversorgung Health Decree of 6 April 2004,
no.174, regarding materials and
Zertifizierungsstelle
objects used for distribution of
Certification body
water for human consumption.
Überwachte Producte
NW-7101AK2001
NW-7103AN2006

TENARISDALMINE EN 10255 SL1 S195T EN 10240 A.1 SENZA PIOMBO - LEAD FREE

TENARISDALMINE EN 10255 SM S195T EN 10240 A.1 SENZA PIOMBO - LEAD FREE

Galvanizing can also be done in accord with the American ASTM A53 standard
Tubes for pressure applications
EN 10216-1 Norm

MECHANICAL AND CHEMICAL CHARACTERISTICS

TYPE OF MECHANICAL PROPERTIES CHEMICAL COMPOSITION % (CAST ANALYSIS)
STEEL
ULTIMATE YIELD ELONGATION
TENSILE STRENGTH C Mn Si P S Al
STRENGTH
Rm ReH A
MIN MIN % MAX MAX MAX MAX MAX MIN
MPa* MPa* l t
P235TR1 360 ÷500 235 25 23 0,16 1,20 0,35 0,025 0,020 -
P235TR2 360 ÷500 235 25 23 0,16 1,20 0,30 0,025 0,020 0,020
* Upon request different steel types in compliance with the norm can be supplied

Tolerances Lengths Ends

Normally supplied in Plain, cut perpendicularly to
On the outside diameter production lengths of from 4 the tube axis
± 1% o ± 0,5 mm, to 8m
the greater of the two values Different lengths must be
agreed upon Tests
On wall thickness Hydrostatic test at 70 bar or
For O.D. > 219.1 mm: Surfaces equivalent nondestructive
± 20% when the Usually supplied hot-finished, electromagnetic test (Eddy
WT/O.D. relationship is ≤ 0.025 without any surface Current)
± 15% when the protection.
WT/O.D. relationship is > 0.025 If requested, for O.D. up to Documentation
273mm, external epoxy resin If not requested otherwise
coating – Thermo – can be when placing the order, a 2.2
supplied test certificate in compliance
with norm EN 10204 will be
issued

DIMENSIONS AND WEIGHT

OUTSIDE W.T. NOMINAL OUTSIDE W.T. NOMINAL
DIAMETER WEIGHT DIAMETER WEIGHT
mm mm kg/m mm mm kg/m
33,7 2,6 1,99 159 4,5 17,15
42,4 2,6 2,55 168,3 5,0 20,13
48,3 2,6 2,93 193,7 5,4 25,08
60,3 2,9 4,11 219,1 6,3 33,06
70 2,9 4,80 244,5 6,3 37,01
76,1 2,9 5,24 273 6,3 41,44
88,9 3,2 6,76 323,9 8,4 65,36
101,6 3,6 8,70 355,6 8 68,58
108 3,6 9,27 406,4 8,8 86,29
114,3 3,6 9,83 457 10 110,24
133 4 12,72 508 11 134,82
139,7 4,0 13,38 610 12,5 184,19