Toyota OBD speed lock manual
Functions:
1. Lock: 15km/h
When car reaches to 15KM/H, automatically Lock the door.
（or when you hang "D" gear, auto lock）
2. Unlock: when turn off ACC
When you turn off ACC, automatically unlock the door.（or when you hang "P" gear, auto unlock）
3. Open door, flash light:
When any one door is opened, lights will be flashing at the same time.
4. Distress (eg collision) unlock and flash light:
When car is in Speed plummeted (within 2 seconds from 50KM to 0KM), lights will flash. When car
is in Speed plummeted (within 1.5 seconds from 50KM to 0KM), automatically unlock the door.
5. When reverse, flash light:
When you hang "R" gear , light will flash, improve safety.
6. Cycle lock.
Speed lock function reset or cancel method:（All should be finished in 30 minutes.）
1.How to turn off“open door, auto flash light” function:
Pull out OBD> Plug in OBD >Start car engine(Close all doors)> Wait 5 seconds>press (UNLOCK –UNLOCK –LOCK-
LOCK –UNLOCK –UNLOCK) in 6 seconds. Light flashing once means turn OFF , flashing twice means turn ON.
2.How to turn off“When reverse, flash light”function:
Pull out OBD> Plug in OBD >Start car engine(Close all doors)> Wait 5 seconds>press (UNLOCK –UNLOCK –LOCK-
UNLOCK –UNLOCK –LOCK) in 6 seconds. Light flashing once means turn OFF, flashing twice means turn ON.
3.How to turn off “Distress (eg collision) unlock and flash light”function:
Pull out OBD> Plug in OBD >Start car engine(Close all doors)> Wait 5 seconds>press (UNLOCK –UNLOCK
–UNLOCK- UNLOCK –LOCK –LOCK) in 6 seconds. Light flashing once means turn OFF, flashing twice means turn ON.
How to install the OBD speed lock？
