JL003 Datasheet
GetaQuote
Overview
The HPE Aruba 5400R Switch Series is a Layer 3 modular switch series that delivers high-performance, low latency and resiliency for a better
mobile-first campus experience. JL003A is a HPE 5406R 16-port SFP+ (No PSU) v3 zl2 Switch, including:
1 HPE 5400R zl2 Management Module (J9827A)
1 HPE 5406R zl2 Switch Fan Tray (J9831A)
1 HPE 24-port 10/100/1000BASE-T PoE+ MACsec v3 zl2 Module (J9986A)
1 HPE 20-port 10/100/1000BASE-T PoE+/4-port 1G/10GbE SFP+ MACsec v3 zl2 Module (J9990A)
Appearance of HPE JL003A
Product Number JL003A
Type HPE 5406R 44GT PoE+/4SFP+ (No PSU) v3 zl2 Switch
1 HPE 5400R zl2 Management Module (J9827A)
1 HPE 5406R zl2 Switch Fan Tray (J9831A)
Included accessories
1 HPE 24-port 10/100/1000BASE-T PoE+ MACsec v3 zl2 Module (J9986A)
1 HPE 20-port 10/100/1000BASE-T PoE+/4-port 1G/10GbE SFP+ MACsec v3 zl2 Module (J9990A)
44 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Media Type: Auto-MDIX;
Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
I/O ports and slots 4 open 10GbE SFP+ transceiver slots
4 open module slots
Supports a maximum of 144 autosensing 10/100/1000 ports or 144 SFP ports or 48 SFP+ ports or
48 HPE Smart Rate Multi-Gigabit or 12 40GbE ports, or a combination
2 power supply slots
Power supplies
1 minimum power supply required (ordered separately)
Includes: 1 x J9831A
Fan Tray
1 fan tray slot
Dimensions (W x D x H) 17.5(w) x 17.75(d) x 6.9(h) in. (44.45 x 45.09 x 17.53 cm) (4U height)
Weight 28.11 lb (12.75 kg)
Compare to Similar Items
Product Code J9821A JL003A
Type HPE 5406R zl2 Switch HPE 5406R 44GT PoE+/4SFP+ (No PSU) v3 zl2 Switch
1 HPE 5400R zl2 Management Module (J9827A)
1 HPE 5406R zl2 Switch Fan Tray (J9831A)
Included 1 HPE 5400R zl2 Management Module (J9827A) 1 HPE 24-port 10/100/1000BASE-T PoE+ MACsec v3 zl2 Module
accessories 1 HPE 5406R zl2 Switch Fan Tray (J9831A) (J9986A)
1 HPE 20-port 10/100/1000BASE-T PoE+/4-port 1G/10GbE SFP+
MACsec v3 zl2 Module (J9990A)
44 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type
10BASE-T, IEEE 802.3u
6 open module slots Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at
Supports a maximum of 144 autosensing PoE+); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half
I/O ports and 10/100/1000 ports or 144 SFP ports or 48 SFP+ or full; 1000BASE-T: full only
slots ports or 48 HPE Smart Rate 4 open 10GbE SFP+ transceiver slots
Multi-Gigabit or 12 40GbE ports, or a 4 open module slots
combination Supports a maximum of 144 autosensing 10/100/1000 ports or 144 SFP
ports or 48 SFP+ ports or 48 HPE Smart Rate Multi-Gigabit or 12 40GbE
ports, or a combination
2 power supply slots
Power 2 power supply slots
1 minimum power supply required (ordered
supplies 1 minimum power supply required (ordered separately)
separately)
Includes: 1 x J9831A Includes: 1 x J9831A
Fan Tray
1 fan tray slot 1 fan tray slot
JL003A Specification
JL003A Specification
Type HPE 5406R 44GT PoE+/4SFP+ (No PSU) v3 zl2 Switch
1 HPE 5400R zl2 Management Module (J9827A)
1 HPE 5406R zl2 Switch Fan Tray (J9831A)
Included accessories
1 HPE 24-port 10/100/1000BASE-T PoE+ MACsec v3 zl2 Module (J9986A)
1 HPE 20-port 10/100/1000BASE-T PoE+/4-port 1G/10GbE SFP+ MACsec v3 zl2 Module (J9990A)
44 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Media Type: Auto-MDIX;
Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
I/O ports and slots 4 open 10GbE SFP+ transceiver slots
4 open module slots
Supports a maximum of 144 autosensing 10/100/1000 ports or 144 SFP ports or 48 SFP+ ports or
48 HPE Smart Rate Multi-Gigabit or 12 40GbE ports, or a combination
2 power supply slots
Power supplies
1 minimum power supply required (ordered separately)
Includes: 1 x J9831A
Fan Tray
1 fan tray slot
Dimensions (W x D x H) 17.5(w) x 17.75(d) x 6.9(h) in. (44.45 x 45.09 x 17.53 cm) (4U height)
Weight 28.11 lb (12.75 kg)
Memory and processor
v3 Gigabit Module Dual ARM® Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB internal
v2 Gigabit Module ARM 11 @ 450 MHz; Packet buffer size: 18 MB internal
v3 10G Module Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB internal
v2 10G Module ARM 11 @ 550 MHz; Packet buffer size: 18 MB internal
v3 40G Module Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB internal
Management Module Freescale P2020 dual core @ 1.2 GHz, 16 MB flash, 1 GB SD Card, 4 GB DDR3 SODIMM
Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included);
Mounting and enclosure
Horizontal surface mounting only
Performance (IPv6 Ready Certified)
1000 Mb Latency < 2.8 µs (FIFO 64-byte packets)
10 Gbps Latency < 1.8 µs (FIFO 64-byte packets)
40 Gbps Latency < 1.5 µs (FIFO 64-byte packets)
Throughput up to 571.4 Mpps
Routing/Switching capacity 960 Gbps
Switch fabric speed 1015 Gbps
Routing table size 10000 entries (IPv4), 5000 entries (IPv6)
MAC address table size 64000 entries
Environment
32°F to 113°F (0°C to 45°C); 0°C to 40°C with J8177C transceiver installed, 0°C to 35°C with
Operating temperature
FIPS Opacity Shield installed
Operating relative humidity 15% to 95% @ 113°F (45°C), non condensing
Nonoperating/Storage temperature -40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative
15% to 95% @ 149°F (65°C), non condensing
humidity
Altitude Up to 10,000 ft (3 km)
Acoustic Power: 44 dB, Pressure: 31.7 dB ISO 7779, ISO 9296
Electrical characteristics
Frequency 50/60 Hz
80plus.org Certification Gold
Does not come with power supply. Two power supply slots are available; three different power supplies
Description
are available. See power supply products for additional specifications.
2450 BTU/hr (2584.75 kJ/hr), (max. non-PoE);
Maximum heat dissipation
3700 BTU/hr (3903 kJ/hr), (max. using PoE)
Voltage 110–127/200–240 VAC, rated (depending on power supply chosen)
Idle power 215 W
Idle power is the actual power consumption of the device with no ports connected. Heat dissipation
Notes
does not include heat dissipated by the PoE-powered devices themselves
Safety CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950
Emissions FCC part 15 Class A; EN 55022/CISPR 22 Class A
Immunity EN 55024, CISPR 24
EN IEC 61000-4-2; 4 kV CD, 8 kV AD;
ESD HPE ENV. 765.002
Radiated IEC 61000-4-3; 3 V/m
EFT/Burst IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line) IEC 61000-4-5; 1 kV/2 kV AC, 1 kV signal, 0.5
Surge kV DC
Conducted IEC 61000-4-6; 3 Vrms
Power frequency magnetic field IEC 61000-4-8; 1 A/m, 50 or 60 Hz
Harmonics IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction, 25 periods
Flicker EN 61000-3-2, IEC 61000-3-2
EN 61000-3-3, IEC 61000-3-3
IMC—Intelligent Management Center; Command-line interface; Web browser; Configuration menu;
Out-of-band management (RJ-45 Ethernet); SNMP Manager; Out-of-band management (serial
Management
RS-232C or micro USB)
AirWave Network Management
Supported 1G SFP transceivers are revision “B” or later (product number ends with the letter
Notes
“B” or later; For example, J9142B, J8177C).
Contact US
+60 13-540 4091
[email protected]Persian Lestari Putra, Seri Kembangan, Selangor, 43300 Malaysia
10952 Slater Ave Fountain Valley, CA 92708, USA
09 AM - 10 PM, Monday - Saturday