8000

3900 200 3900

WELDED JOINT

105
76 x 76 x 6 M.S. 1860 1860 1860 1860
VERTICAL ANGLE
200 x 200 x 10 REMOVABLE R.H.S. CAPPED A
T
12 MAX. o
BOTH ENDS WITH 6mm STEEL PLATE 60
20 NOS. 440 x 60 x 10 M.S.
X X X X X X X X X X

FLATS TAPERED AT 20 NOS. 440 x 60 x 10 M.S. FLATS

THE TOP TAPERED AT THE TOP

X X X X X X X X X X

(SEE SECTION D-D)

X X X X X X X X X X

3 mm THICK

COVER PLATE
40 x 20 x 1.6 M.S.
60 x 10 M.S.

340
340
HOLLOW SECTION
FLATS TAPERED

335
AT THE TOP
76 x 76 x 6 M.S.

ANGLE

100 x 100 x 6

STEEL HOLLOW

SECTION (3.50m LONG)

WELDED JOINT

830
GATE POST

60 x 12 M.S. 60 x 12 M.S.

FLATS GATE FRAME FLATS GATE FRAME

44 x 44 x 5

M.S. ANGLE

340
LOGO LOGO
SECTION B-B SECTION D-D
SCALE 1 : 5 SCALE 1 : 5

19 NOS. GATE MEMBER 19 NOS. GATE MEMBER

40 x 20 x 1.6 STEEL 40 x 20 x 1.6 STEEL

HOLLOW SECTION EQUALLY HOLLOW SECTION EQUALLY

830
SPACED OVER A CLEAR SPACED OVER A CLEAR

SPAN OF 1836 SPAN OF 1836

25mm SLOPE

900
CONCRETE
380 x 380 x 10 12 mm THICK X 1040 DEEP 380 x 380 x 10
200 x 200 x 100
BASE PLATE 0 20 M.S.
/ GALV. MILD STEEL BASE PLATE
DEEP

300
DROP BOLTS

300
WELDED TO GATE SOCKET WELDED TO GATE
POST POST

150
50
80 x 80 x 75 GALV. PILES TO FOUNDATION
SQUARE 1050
M.S. SLEEVE TO ENGINEER’S DETAILS
380 x 380 x 10
CONCRETE
(12mm THICK)
BASE PLATE WELDED
800 x 800 x 1200
TO GALV. MILD
DEEP
STEEL SOCKET
80
340 x 340 x 3 THICK
8 - METRE WIDE GATE M.S. PLATE WELDED

TO GATE FRAME

340
60
SCALE 1 : 20
AND GATE MEMBERS

C
4800 435 DIA. 30
76 x 76 x 6 M.S.
2300 2300
VERTICAL ANGLE
12 MAX.

X X X X X
D X X X X X

24 NOS. 440 x 60 x 10

M.S. FLATS TAPERED AT

X X X X X X X X X X

THE TOP

(SEE SECTION D-D) 10 10

X X X X X X X X X X 200 215
3 mm THICK

COVER PLATE

340
D

340
76 x 76 x 6 M.S.
SECTION C-C
ANGLE

SCALE 1 : 5
100 x 100 x 6
BARRELS TO BE
STEEL HOLLOW
RIVETED OR WELDED
SECTION (3.50m LONG)
TO M.S. PLATE
GATE POST 340 340

60 x 12 M.S.

830
FLATS GATE FRAME

B
44 x 44 x 5

M.S. ANGLE

C
ELEVATION

340
LOGO SCALE 1 : 5

A OUTSIDE
A
12 MAX. NOTES:
B
23 NOS. GATE MEMBER

40 x 20 x 1.6 STEEL
1. 25mm x 5mm CLAMP BAR TO BE USED ON A LL
HOLLOW SECTION EQUALLY
STRAINING POSTS AND ALL STEEL MEMBER

830
OF
SPACED OVER A CLEAR
GATE FOR HOLDING DOWN THE WIRE MESH.
SPAN OF 2276

2. ALL STRUCTURES ABOVE GROUND TO BE AT

LEAST 2.3 METRES CLEAR OFF ALL BOUNDARIES.

435 x 40 x 10 FLAT
M.S. BAR
3. ALL BOLTS, NUTS, STAPLES AND WASHERS SHALL
10 200 10 10 20 10 BE PLATED OR COATED WITH STAINLESS METAL.

INSIDE 4. THE MILD STEEL GATES AND GATE POSTS S HALL BE

25mm SLOPE
900

GALVANISED AND THEN PRIMED INTHE FACTORY . AFTER

CONCRETE
380 x 380 x 10 ERECTION ON SITE, THE GATES AND THE GATE POSTS

BASE PLATE
0 20 M.S.
/ 200 x 200 x 100
PLAN SHALL BE PRIMED AGAIN AND PAINTED WITH T WO COATS
DROP BOLTS DEEP

300
300

WELDED TO GATE OF PAINT.

POST DETAIL OF LOCKING DEVICE ARRANGEMENT 5. GATE FOR PUB ELECTRICAL SUB-STATION SHALL BE PROVIDED

50
WITH ROLLERS ON RAILS.
80 x 80 x 75 GALV. SCALE 1 : 5
PILES AND FOUNDATION TO
M.S. SLEEVE SQUARE 1050
ENGINEER’S DETAILS
(12mm THICK)

4.8 METRE WIDE GATE

SCALE 1 : 20

100 x 100 x 6 STEEL HOLLOW

2400 2400
SECTION (3.50m LONG)
340 x 340 x 3 M.S. PLATE WELDED
WELDED
TO GATE FRAME AND GATE

MEMBERS

M 10 DIA. STEEL BOLT

12 MAX.
40 x 20 x 1.6 STEEL 60 x 12 M.S. FLAT

HOLLOW SECTION
25 x 5 CLAMP BAR
CHAIN LINK FENCING
SECTION A-A
SCALE 1 : 5

SCALES

ISSUED BY WATER RECLAMATION (NETWORK) DEPARTMENT

AS STANDARD 8-METRE AND 4.8-METRE WIDE GATES Water for All:Conserve,Value,Enjoy
ON APR ’05
SHOWN WATER RECLAMATION (NETWORK) DEPARTMENT
DRG. NO. PUB/WRN/STD/103

[ ORIGINAL BORDER SIZE 810mm X 565mm ]