3 THICK ALUMINIUM ALLOY 50 x 50 x 4

PRECAST COVER
CHEQUERED PLATE OR ANGLE KERB 50 x 15 GALVANISED M.S.
3 THICK HOT DIP GALVANISED
SLAB (MIN. 3 NOS.) SCREEN AT 30 C/C FIXED

MILD STEEL PLATE FIXED DEAD ON THE GALVANISED

TO LOCKLINE M.S. GRATING CONCRETE GRADE 25 M.S. HORIZONTAL BARS
40 x 3 WITH REINFORCEMENT

50

150
GROUND LEVEL 50 50 GROUND LEVEL

150 150 150

SCREEN
CHAMBER

A 3 THICK ALUMINIUM A

VARIES
ALLOY CHEQUERED
PLATE OR
3 THICK HOT DIP GALV.
MILD STEEL PLATE 300
BENCHING

50
MAX. 2500
100/150 DIA. PIPE
DIA. 100/150 C.I./ 40
CLASS ’K9’ DUCTILE
D.I./ VITRIFIED CLAY
IRON PIPE 75 75

150
325

300
PIPE FROM SULLAGE

WATER SUMP OR

L GULLY TRAP
FAL
100/150 DIA. PIPE

300

300
150
FLOW

150
T.W.L. T.W.L. T.W.L.

50
OUTLET

300

75

650
650
150 x 150 OPENING

600
MIN. 900 SAND BEDDING

100 THICK CONCRETE

REINFORCEMENT R10-225

150
100 THICK CONCRETE
SCREED
BOTHWAYS OR BRC A7
SCREED
150 150 150 150 150

REINFORCEMENT R10-225 GRADE 25 CONCRETE REINFORCEMENT R10-225

BOTHWAYS OR BRC A7 BOTHWAYS OR BRC A7

150
150

GRADE 25

CONCRETE

PILES AND FOUNDATION TO ENGINEER’S DETAILS

200 x 300 x 300

CONCRETE GRADE 25
STRAINER BUCKET

SECTION B-B SECTION C-C SECTION D-D

100
100 500 E 500 100

50
TYPE 304 STAINLESS

120
80
STEEL FRAME AND
6mm SQUARE MESH

Y Y

700

300

300
C 115 THICK ENGINEERING BRICKWALL
WITH CEMENT MORTAR RENDERING

350
STANDARD 50 THICK
225 900 225
300 DIA. REINFORCED

CONCRETE PIPE
150

200 x 300 x 300

STAINLESS STEEL
STRAINER BUCKET E
40 200 40

100/150 DIA. PIPE

225
150 DIA. D.I. PIPE
IN 150 THICK
CONCRETE GRADE
25 SURROUND
D SECTION Y-Y PLAN

B SLOPE B PLAN VIEW DETAILS OF STAINLESS STEEL STRAINER BUCKET

700
1 : 50 SCALE 1 : 5
150
150 5 INLET FLOW
2
3 CONCRETE GRADE 25
D WITH REINFORCEMENT 700
FL
O
W
CLASS ’K9’ DUCTILE

225
IRON PIPE 150

STANDARD 100 THICK 150 x 150 OPENING 600

150

1050 DIA. PRECAST IN 115 THICK ENGINEERING

150

CHAMBER RING BRICKWALL WITH CEMENT CROSS BAR DIA. 10

MORTAR RENDERING

NOTES
SECTION E-E
1. THE CIRCULAR GREASE TRAP SHALL BE INSTALLED AT THE PLACE WHERE IT

150 THICK CONCRETE

C WALL TO ENGINEER’S DETAILS
IS NOT SUBJECTED TO VEHICULAR LOAD.

GRADE 25 SURROUND 2. INFLOW TO THE GREASE TRAP SHALL BE FROM COVERED AREA i.e. NO
RAIN WATER IS TO BE DISCHARGED INTO THE GREASE TRAP.

DIA. 100 GALVANISED MILD STEEL RING 3. THE OWNER/DEVELOPER SHOULD MAINTAIN THE GREASE TRAP REGULARLY SO
AS TO ENSURE THAT NO GREASE OR OIL IS DISCHARGED INTO THE SEWER.
DIA. 10 GALVANISED MILD STEEL BAR BENT TO SHAPE

SECTIONAL PLAN A-A 4. OIL, GREASE, SLUDGE ETC. COLLECTED IN THE GREASE TRAP SHALL BE REMOVED

50
AND DISPOSED OF IN A MANNER ACCEPTABLE TO THE COMPETENT AUTHORITIES.

5. SCREENINGS SHALL BE REMOVED BY EMPTYING THE STRAINER DAILY AND

DISPOSED OF IN A MANNER ACCEPTABLE TO THE COMPETENT AUTHORITIES.
150 150

800

DETAILS OF PRECAST COVER SLAB WITH LIFTING RING

SCALE 1 : 10

SCALES

ISSUED BY WATER RECLAMATION (NETWORK) DEPARTMENT 1 : 15

ON APR ’05 UNLESS
STANDARD GREASE TRAP FOR SMALL EATING STALLS Water for All:Conserve,Value,Enjoy

WATER RECLAMATION (NETWORK) DEPARTMENT

OTHERWISE
STATED DRG. NO. PUB/WRN/STD/041

[ ORIGINAL BORDER SIZE 810mm X 565mm ]