EW140D

VOLVO EXCAVATORS 14.1-16.1t 143hp

A passion for performance.
At Volvo Construction Equipment, we’re not just
coming along for the ride. Developing products
and services that raise productivity – we are
confident we can lower costs and increase profits
for industry experts. Part of the Volvo Group, we
are passionate about innovative solutions to help
you work smarter – not harder.

Helping you to do more

Doing more with less is a trademark of Volvo Construction Equipment.
High productivity has long been married to low energy consumption,
ease of use and durability. When it comes to lowering life-cycle costs,
Volvo is in a class of its own.

Designed to fit your needs

There is a lot riding on creating solutions that are suited to the particular
needs of different industry applications. Innovation often involves high
technology – but it doesn’t always have to. Some of our best ideas
have been simple, based on a clear and deep understanding of our
customers’ working lives.

You learn a lot in 180 years

Over the years, Volvo has advanced solutions that have revolutionized
the use of construction equipment. No other name speaks Safety louder
than Volvo. Protecting operators, those around them and minimizing our
environmental impact are traditional values that continue to shape our
product design philosophy.

We’re on your side

We back the Volvo brand with the best people. Volvo is truly a global
enterprise, one that is on standby to support customers quickly and
efficiently – wherever they are.

We have a passion for performance.

Volvo Trucks Renault Trucks Mack Trucks

2
UD Trucks Volvo Buses Volvo Construction Equipment Volvo Penta Volvo Aero Volvo Financial Services
Built for efficiency.
At Volvo we are proud of our fuel efficient and environmentally responsible machines, we deliver more
power for less fuel. The EW140D is no exception; our newly developed engine meets all legislative
requirements, improves performance and lowers fuel consumption to save you time and money.

Fuel efficiency Diesel Particulate Filter (DPF)

Increased fuel efficiency from Volvo’s D4 Stage IIIB/Tier 4 Interim engine, The active-type DPF includes a Diesel Oxidation Catalyst function and
enhanced hydraulic system and well matched Volvo components. More regeneration burner. The system temporarily holds the exhaust fumes
power with ultimate efficiency. and incinerates them, lowering emissions without reducing performance.

Exhaust Gas Recirculation (EGR) and Electronic Control Unit Regeneration

(ECU) Particles collected during filter cleaning are oxidised and transformed
Efficient cooled external EGR reduces oxygen concentration and into non-toxic CO2 every 6-10 hours. Volvo’s regeneration system does
decreases the combustion temperature for lower emissions. The ECU not interrupt operation, performance or productivity. Regeneration can be
controls the mix of recirculated exhaust gas and fresh air – crucial for postponed if the timing is inconvenient.
reducing emissions, performance and fuel economy.

4
 Volvo D4 Stage IIIB/Tier 4 Interim engine
Volvo’s efficient diesel engine with V-ACT technology
gives you more power, while consuming less fuel, for
high torque at low engine speeds. Low emission levels for ultimate
efficiency and environmental care.
 Demand control.

Industry-leading cab
All-round visibility and an excellent operator
environment are at the heart of Volvo’s cab design. The
spacious cab, with ample storage and leg room and easy to access
controls, increases operator productivity and reduces fatigue.
Volvo puts you in control with its industry leading cab; achieve more while working comfortably. Get
productive with our excellent all-round visibility, increased safety and ample space. See more and do more
with Volvo.

Adjustable steering column ROPS

Slim design of the easily adjustable steering column ensures visibility is The cab features Roll Over Protective Structure (ROPS) which meets the
not impaired for increased operator comfort. ISO 12117-2 safety standard for increased peace of mind in the unlikely
event of machine roll over.

Smart controls Automatic climate control system

Navigate through the colour I-ECU monitor via the conveniently located Operators can set their ideal temperature with Volvo’s powerful climate
control panel. The monitor can be clearly read in all light conditions for control system which is fitted as standard. Industry leading air circulation
easy visual and diagnostic checks, increasing uptime and productivity. and defrosting capability is delivered with 14 well-spaced vents for
increased comfort and productivity.

7
We set the standard.
Quality is at the forefront of the wheeled excavator design. These tough machines are highly mobile,
productive and flexible – both on and off-road. Trust Volvo for quality you can rely on.

Anti-slip plate Hammer/shear (X1) and attachment LED rear lights

rotation (X3) management
Added operator and service mechanic safety LED lights on the rear counterweight provide
from punched anti-slip plate which provides Increase your wheeled excavator versatility longer life time and improved appearance.
superb grip, especially in wet or icy conditions. with optional hydraulics functions X1 hammer/
shear and X3 rotation. X1 function utilizes
the main system hydraulic flow to operate
attachments requiring one or two way flow
whereas X3 function provides an appropriate
2 way flow for tilting or rotating attachments.

Stays and locking devices Battery disconnect switch Tightening eyes

Volvo’s automatic stays prevent doors being The benefits of turning the battery disconnect A new type of over dimensioned tightening
blown closed for added safety, they can switch off include; safeguarding the electrical eyes secure the machine to the trailer and
easily be manually released. Automatic locks system during maintenance, protection of the enable it to be lifted. The four eyes are on
ensure the doors close properly and enhance battery voltage when the machine is not used top of the undercarriage sides to ensure easy
appearance. for long periods and prevention of theft and operator access.
unauthorized use.

8
 Quality
Volvo matched components and an excellent
combination of features come together to produce a
quality machine. Our rear view camera is fitted as standard and
provides superb clarity via the colour I-ECU monitor. An optional
side view camera further increases safety.
 Performance you can measure.

Performance
Optimized breakout and digging force through
impeccable hydraulic cylinders ensure increased
digging power for high performance. The radial blade width
is 2.55m and an optional parallel blade is available. Kinematics
minimize road damage.
The Volvo wheeled excavators are designed to help you do more. An enhanced hydraulic system and well
matched Volvo components guarantee you increased digging performance. It all adds up to more with
Volvo.

Attachment management system Eco mode Travel motor

Allows storage of up to 18 different For increased fuel efficiency eco mode has New electronical, proportional control travel
attachment presets and enables hydraulic been added to the choice of work modes motor provides increased controllability for
flow (standard) and pressure (optional) to be available. Choose the correct mode according smoother downhill rides and when increasing
adjusted according to requirements. Operators to your working conditions for added versatility speed while carrying a heavy load. For all
can change attachments quickly without and increased performance. models except 20Km/h version.
manual setup.

Tilt rotator Axle oscillation and lock Automatic idling system and automatic
For increased off-road performance the front engine shut down
The optional tilt rotator acts as a wrist
between the arm and bucket of the machine. axle oscillation is 9° or 6° if mudguards are The idling system reduces rpm when the
It combines 360° rotary motion with 45° tilt specified. Oscillation lock can be activated by controls are inactive for a specified time
action for flexibility and profitability. the operator or automatically when ‘Parking (between 3-20 seconds). When the machine
Mode’ is selected. is stationary for the selected time the
engine will automatically shut down – this
is easily disabled and adjusted. Reduce fuel
consumption and save money.

11
Easy to maintain.
Serviceability is built in to the new EW140D. Easy access to grouped service points allows for fast and
effortless maintenance and service checks. Increase your uptime with Volvo.

Grouped filters Fuel filler pump Rear access

Grouped filters in the pump compartment are Get more versatility from the fuel filler pump New rear entry behind the cab grants safe and
accessible via one door at ground level for which allows for the machine to be re-filled easy access to the main hydraulic components
faster servicing and more machine uptime. from an external fuel tank. This provides 50l / and engine. Stairway allows for access to the
min and an auto-stop function. top of the superstructure.

CareTrack Grouped greasing points Cooling system

Volvo’s telematics system guides machine Conveniently located boom and arm greasing Cooling fan speed is controlled to its need
owners towards optimized productivity points are grouped for simplicity and ease which reduces fuel consumption and noise.
and their next service – remotely. Get fuel of access. Greasing is needed at 50 hour The three coolers - change air cooler, water
consumption and location reports to save fuel intervals and at 250 hours for the slew ring. cooler and hydraulic cooler - form a single
and reduce costs. Quicker maintenance leads to increased layer layout and are cooled by one fan for a
productivity. more compact design, which is easy to service
and clean – guaranteeing you more uptime.

12
 Serviceability
Grouped filters and accessible radiators are quick
to access from ground level via large compartment
doors – increasing safety. Fast and easy access for maintenance
means regular checks are more likely to be done leading to longer
machine operating life.
The complete package.

Boom configurations
The EW140D is available with either
a mono boom, a two piece boom
or a mono offset boom providing
increased flexibility and versatility.

Quality
Vo l v o m a t c h e d
components and
excellent features combine to
produce a quality machine you
can trust.

Auto greasing system

This optional feature supplies
the correct amount of lubrication
to all greasing points on a timed
basis for reduced costs.

Eco mode
Work in Volvo’s new eco mode for Radial blade
increased fuel efficiency. The radial blade width is 2.55m.
An optional parallel blade is also
available.

14
 Cab
Spacious cab with excellent
all-round visibility and easy
to access controls. Approved to ROPS
safety standards.

Diesel Particulate Filter (DPF)

The active-type DPF incinerates exhaust
fumes to lower emissions.

Stage IIIB/Tier 4
Interim engine
Volvo’s efficient diesel
engine with V-ACT technology gives
you more power, while consuming less
fuel for low emission levels.

Heavy counterweight
A 15% heavier counterweight for
increased stability when using bulky
attachments is available as an option for
more versatility.

Serviceability
Grouped filters are quick
and easy to access from
ground level via large compartment
doors for increased safety.

Travel motor
New electronical, proportional control travel
motor provides increased controllability for
a smoother downhill ride.

15
Volvo EW140D IN DETAIL.
Engine Hydraulic system
Volvo Construction Equipment is ready to comply with the tough new EU Stage IIIB Closed-centre load sensing hydraulic system with pressure compensated valves.
and US (EPA) Tier 4 interim legislation for off-road vehicles with the introduction Load independence of movements. Flow sharing feature, combined with a high
of a cascade of innovations in its new generation engines with Volvo Advanced flow electronically controlled pump (power regulation). The system gives superior
combustion technology (V-ACT). manoeuvrability and fast movements, for optimal working result and economy.
Volvo machines are equipped with Volvo designed and manufactured in-lline turbo The following working modes are included in the system:
charged diesel engine with high pressure unit injector system. The engine features Parking mode (P): Parking position for optimal safety.
a externally cooled exhaust gas re-circulation (E-EGR) and a Diesel Particulate Travel mode (T): Engine speed is controlled by travel pedal stroke for low fuel
Filter. consumption and noise.
Engine VOLVO D4H Working mode (W): Full working flow with adjustable engine rpm for normal
working and best speed utilisation.
Power output at rpm 2 000 Customer mode (C): Operator can set proper oil flow in accordance with job
Gross (ISO 14396) kW 105 conditions.
hp 143 Power Boost: All digging and lifting forces are increased.
Net (ISO 9249, DIN 6271) kW 102 Hydraulic pumps:
hp 139 Max. flows:
Max. torque at 1600 rpm Nm 609 Main pump
l/min 247
No. of cylinders 4 (type low noise axial piston pump)
Displacement l 4 Brake + steering pump
l/min 36
(type low noise gear pump)
Bore mm 101
Servo pump
Stroke mm 126 l/min 15
(type low noise gear pump)
Electrical system Max. pressure:
High-capacity electrical system that is well protected. Waterproof double-lock Implements MPa 32/36
harness plugs are used to secure corrosion-free connections. The main relays and
Travel system MPa 36
solenoid valves are shielded to prevent damage. The master switch is standard.vv
Voltage V 24 Pilot System MPa 4
Battery V 2 x 12 Brakes
Battery capacity Ah 2 x 140 Service brakes: servo-hydraulically manoeuvred self-adjusting wet multidiscs with
two separate brake circuits.
Alternator V/A 28 / 120
Parking brake: negative wet disc in gear housing, spring applied and pressure
Alternator rating W 3 360 released.
Undercarriage Digging brake: service brake with mechanical lock system.
Drive train: A variable axle piston motor in combination with a power shift gearbox supplies Security system: The 2-circuit travel brakes are supplied with two accumulators in
3 speeds. The gearbox distributes than the energy via propeller shafts to the axles. the event of failure in the service brake system.
Framework: All-welded robust torsion box frame. Total machine weights
Wheels: Alternative single and twin wheels available. Machine with 4.5 m mono boom, 2.45 m dipper arm, quickfit S6,
Front axle: Robust excavator axle with automatic or operator controlled front axle 410 kg /580 l bucket. Standard counterweight.
oscillation lock. Parallel blade front and outriggers rear kg 15 900
Oscillating ° 9
Radial blade front and outriggers rear kg 15 200
with mudguards ° 6
Radial blade rear only kg 14 100
Twin wheels 10.00–20
Parelell blade rear only kg 14 800
Max. tractive force (net) kN 82
Machine with 4.7m 2-piece boom, 2.45 m dipper arm, quickfit S6,
Travel speed 410 kg /580 l bucket. Standard counterweight.
on road km/h 20.0/30.0/35.0 Parallel blade front and outriggers rear kg 16 100
off road km/h 5.0/7.4/8.8 Radial blade front and outriggers rear kg 15 400
creep km/h 5 Radial blade rear only kg 14 300
Min. turning radius m 7.3 Parelell blade rear only kg 15 000
Cab Service refill capacities
New-design Volvo Care Cab with operator protective structure, large and roomy Fuel tank l 250
interior, more leg room and foot space. One way travel pedal with rocker switch
control (F-N-R) on the right joystick. One-touch release for digging brake pedal. Hydraulic system, total l 230
Audio system with remote control. 3 cup holders, 3 outlets, independently Hydraulic tank l 98
adjustable joystick consoles. Engine oil l 18
Excellent all-round visibility provided by maximized cab class, transparent roof hatch, Engine coolant l 30
2-piece sliding door window and longstroke, easy to adjust and narrow steering
column. The liftable front windshield can easily be stored in the inside roof space Transmission l 2.5
and clipped in postion. The removable lower front glass can be stored in the side Axel differential:
door pocket. Interior lighting consists of one reading light and one light with timer. Front axle l 9
The pressurized and filtered cab air is supplied by a 14-vent climate-control
Rear axle l 11.5
providing fast defrosting and high cooling and heating performance. Viscous/spring
mounted suspension cushions protect the operator from vibrations. Deluxe air- Final drive, wet disc type l 4 x 2.4
suspension seat with adjustable seat suspension, height, tilt, recline and forward- Slew system
backward settings (option). The superstructure is slewed by the means of a radial piston motor without
Adjustable, easy to read 6.4" LCD color monitor provides real time information of reduction gear.
machine functions and important diagnostic information and is switchable to rear Automatic slew holding brake and anti-rebound valve are standard.
view camera monitor. Max slew speed rpm 10
Sound Level Max. slew torque kNm 42.8
In cab, acc. to ISO 6396 LpA dB(A) 70
External, acc. to ISO 6395 LwA dB(A) 101
(Directive 2000/14/EC)

16
Dimensions.

Description Unit Mono boom 2-piece boom Mono offset boom

m 4.5 4.7 4.75
A Overall width of superstructure mm 2 520 2 520 2 520
B Overall width mm 2 540 2 540 2 540
C Overall height of cab mm 3 140 3 140 3 140
D Tail slew radius mm 2 030 2 030 2 030
E Counterweight clearance mm 1 250 1 250 1 250
F Wheel base mm 2 600 2 600 2 600
G Tread mm 1 940 1 940 1 940
H Outrigger width (front or rear) mm 3 980 3 980 3 980
I Min. ground clearance mm 350 350 350
Description Unit Mono boom 2-piece boom
m 4.5 4.7
Arm Grab Arm Arm Grab Arm
m 2.0 2.45 2.6 3.1 2.95* 2.0 2.45 2.6 3.1 2.95*
L Overall length mm 7 640 7 510 7 450 7 300 7 710* 7 840 7 760 7 720 7 540 7 790*
M Overall height of boom mm 2 900 3 320 3 440 3 700 3 250* 2 730 3 040 3 140 3 660 3 200*
L1 Overall length mm 5 830 6 160 6 200 5 550** 6 880
M1 Overall height of boom mm 3 990 4 000 4 000 3 980** 3 930
N Front overhang mm 2 610 2 940 2 990 2 330** 3 500
Description Unit Mono offset boom
m 4.75
Arm
m 2.0 2.45 2.6 3.1
L Overall length mm 7 890 7 870 7 880 7 600
M Overall height of boom mm 2 970 3 250 3 200 3 860
* grab arm, without clamshell bucket
* * without bucket

Description Unit Undercarriage dimensions

P mm 1 150
P1 mm 670
Q mm 1 150
R mm 1 030
T mm 4 780
T2 mm 4 470
V mm 1 160
V2 mm 1 010
X mm 630
Y mm 180
Z mm 400

17
working ranges & digging forces.

Mono boom 4.5 m and Monoboom 4.5m and

dipper arm 2.0 m, 2.45 m, 2.6 m, 3.1 m grab arm 2.95 m

Description Unit Mono boom

m 4.5
Arm Grab arm
m 2.0 2.45 2.6 3.1 2.95
A Max. digging reach mm 7 970 8 390 8 530 9 000 7 380
B Max. digging reach on ground mm 7 760 8 190 8 330 8 810
C Max. digging depth mm 4 600 5 050 5 210 5 700 4 120
D Max. digging depth (I = 2 440 mm level) mm 4 370 4 860 5 020 5 540
E Max. vertical wall digging depth mm 3 870 4 300 4 430 4 920
F Max. cutting height mm 8 310 8 550 8 630 8 900 7 330
G Max. dumping height mm 5 570 5 800 5 890 6 150
H Min. front slew radius mm 2 700 2 720 2 720 2 730 3 270
Digging forces with direct fit bucket
Breakout force - bucket (ISO) kN 108.5* 108.5* 108.5* 108.5*
Tearout force (ISO) kN 73* 63.5* 61* 53.5* *with Power boost
Max. recommended sizes for direct fit buckets
GP-Bucket (1.8 t/m3) l 730 730 730 730
Max. recommended sizes for quick fit buckets
S6/S60 QF GP-Bucket (1.8 t/m3) l 730 730 730 730
S6 QF HD-Bucket (2.1 t/m3) l 520 520 520 520
UQF GP-Bucket (1.8 t/m3) l 730 730 730 660

Note:
1. Bucket size based on SAE-J296, heaped material with a 1:1 angle of repose.
2. “Max permitted sizes” are for reference only and are not necessarily available from the factory.
3. Bucket recommendations with heavy counterweight.

18
 2-piece boom 4.7 m and 2-piece boom 4.7 m and
dipper arm 2.0 m, 2.45 m, 2.6 m, 3.1 m grab arm 2.95 m

Description Unit 2-piece boom

m 4.7
Arm Grab arm
m 2.0 2.45 2.6 3.1 2.95*
A Max. digging reach mm 8 230 8 660 8 800 9 280 7 660
B Max. digging reach on ground mm 8 030 8 460 8 610 9 100
C Max. digging depth mm 4 640 5 090 5 240 5 730 4 140
D Max. digging depth (I = 2 440 mm level) mm 4 520 4 980 5 130 5 640
E Max. vertical wall digging depth mm 3 640 4 070 4 220 4 700
F Max. cutting height mm 9 210 9 540 9 650 10 010 8 380
G Max. dumping height mm 6 350 6 680 6 790 7 160
H Min. front slew radius mm 2 430 2 550 2 600 2 730 3 220
Digging forces with direct fit bucket
Breakout force - bucket (ISO) kN 108.5* 108.5* 108.5* 108.5*
Tearout force (ISO) kN 73* 63.5* 61* 53.5* *with Power boost
Max. recommended sizes for direct fit buckets
GP-Bucket (1.8 t/m3) l 730 730 730 660
Max. recommended sizes for quick fit buckets
S6/S60 QF GP-Bucket (1.8 t/m3) l 730 730 730 580
S6 QF HD-Bucket (2.1 t/m3) l 520 520 520 520
UQF GP-Bucket (1.8 t/m3) l 730 730 730 580

Note:
1. Bucket size based on SAE-J296, heaped material with a 1:1 angle of repose.
2. “Max permitted sizes” are for reference only and are not necessarily available from the factory.
3. Bucket recommendations with heavy counterweight.

19
working ranges & digging forces.

Mono offset boom 4.75 m and

dipper arm 2.0 m, 2.45 m, 2.6 m, 3.1 m

Description Unit Mono offset boom

m 4.75
Arm
m 2.0 2.45 2.6 3.1
A Max. digging reach mm 8 160 8 570 8 710 9 170
B Max. digging reach on ground mm 7 960 8 370 8 510 8 990
C Max. digging depth mm 4 860 5 310 5 470 5 960
Max. digging depth at max. attachment
C1 mm 1 490 1 940 2 090 2 590
offset with vertical trench walls
D Max. digging depth (I = 2 440 mm level) mm 4 610 5 090 5 250 5 780
E Max. vertical wall digging depth mm 3 800 4 230 4 370 4 850
F Max. cutting height mm 8 270 8 470 8 530 8 760
G Max. dumping height mm 5 610 5 770 5 930 6 110
H Min. front slew radius mm 2 940 2 920 2 910 2 960
J 42°
K mm 2 200
L mm 2 420
Digging forces with direct fit bucket
Breakout force - bucket (ISO) kN 108.5* 108.5* 108.5* 108.5*
Tearout force (ISO) kN 73* 63.5* 61* 53.5*
Max. recommended sizes for direct fit buckets
GP-Bucket (1.8 t/m3) l 730 730 730 660
Max. recommended sizes for quick fit buckets
S6/S60 QF GP-Bucket (1.8 t/m3) l 730 730 730 580
S6 QF HD-Bucket (2.1 t/m3) l 520 520 520 520
UQF GP-Bucket (1.8 t/m3) l 730 730 660 580

Note:
1. Bucket size based on SAE-J296, heaped material with a 1:1 angle of repose.
2. “Max permitted sizes” are for reference only and are not necessarily available from the factory.
3. Bucket recommendations with heavy counterweight.

20
lifting capacity.
At the arm end, without bucket and quick fit. Unit: 1 000 kg.
For lifting capacity including bucket/quick fit, simply subtract actual weight of those parts from the following values. With heavy counterweight.

Reach from machine centre (u = support up/d = support down)

Across Arm end 1.5 m 3m 4.5 m 6m 7.5 m Max.
under- (bucket
carriage pivot)
Along related to Max.
under- ground
carriage level
u d u d u d u d u d u d u d u d u d u d u d u d m
6m - - - - - - - - 3.9 4.1* 4.1* 4.1* - - - - - - - - 3.3 3.4* 3.4* 3.4* 4.9
4.5 m - - - - - - - - 3.8 4.3* 4.3* 4.3* - - - - - - - - 2.4 3.2* 3.2* 3.2* 5.9
4.5m
mono boom 3m - - - - 6.4 8.0* 8.0* 8.0* 3.6 5.2* 5.2* 5.2* 2.4 4.0 3.8 4.3* - - - - 2.1 3.3* 3.3* 3.3* 6.4
2m
1.5 m - - - - - - - - 3.4 6.0 5.6 6.1* 2.3 3.9 3.7 4.6* - - - - 2.0 3.4 3.2 3.6* 6.5
dipper arm
Front dozer blade 0m - - - - 5.8 7.1* 7.1* 7.1* 3.2 5.8 5.5 6.5* 2.2 3.8 3.6 4.8* - - - - 2.1 3.6 3.4 4.2* 6.3
Rear outriggers
-1.5 m - - - - 5.8 9.1* 9.1* 9.1* 3.2 5.8 5.5 6.2* - - - - - - - - 2.4 4.2 4.0 4.7* 5.6
-3 m - - - - 6.0 6.8* 6.8* 6.8* - - - - - - - - - - - - 3.6 4.6* 4.6* 4.6* 4.3
6m - - - - - - - - - - - - - - - - - - - - 2.7* 2.7* 2.7* 2.7* 5.5
4.5 m - - - - - - - - 3.8 3.9* 3.9* 3.9* 2.4 3.7* 3.7* 3.7* - - - - 2.2 2.5* 2.5* 2.5* 6.4
4.5m
mono boom 3m - - - - 6.6 7.0* 7.0* 7.0* 3.6 4.8* 4.8* 4.8* 2.3 4.0 3.8 4.0* - - - - 1.9 2.6* 2.6* 2.6* 6.8
2.45m
1.5 m - - - - 5.9 6.7* 6.7* 6.7* 3.4 5.8* 5.6 5.8* 2.2 3.9 3.7 4.4* - - - - 1.8 2.8* 2.8* 2.8* 6.9
dipper arm
Front dozer blade 0m - - - - 5.7 7.3* 7.3* 7.3* 3.2 5.8 5.5 6.4* 2.2 3.8 3.6 4.7* - - - - 1.9 3.2 3.0 3.2* 6.7
Rear outriggers
-1.5 m 5.9* 5.9* 5.9* 5.9* 5.7 9.6* 9.6* 9.6* 3.2 5.7 5.4 6.3* 2.2 3.8 3.6 4.4* - - - - 2.1 3.7 3.5 4.2* 6.1
-3 m - - - - 5.8 7.7* 7.7* 7.7* 3.2 5.1* 5.1* 5.1* - - - - - - - - 2.9 4.5* 4.5* 4.5* 4.9
6m - - - - - - - - - - - - - - - - - - - - 2.5* 2.5* 2.5* 2.5* 5.7
4.5 m - - - - - - - - 3.7* 3.7* 3.7* 3.7* 2.4 3.6* 3.6* 3.6* - - - - 2.1 2.4* 2.4* 2.4* 6.5
4.5m
mono boom 3m - - - - 6.7* 6.7* 6.7* 6.7* 3.6 4.7* 4.7* 4.7* 2.4 3.9* 3.8 3.9* - - - - 1.8 2.4* 2.4* 2.4* 7.0
2.6m
1.5 m - - - - 6.0 7.6* 7.6* 7.6* 3.4 5.7* 5.7 5.7* 2.2 3.9 3.7 4.4* - - - - 1.8 2.6* 2.6* 2.6* 7.1
dipper arm
Front dozer blade 0m - - - - 5.7 7.3* 7.3* 7.3* 3.2 5.8 5.5 6.4* 2.2 3.8 3.6 4.7* - - - - 1.8 3.0* 3.0 3.0* 6.8
Rear outriggers
-1.5 m 5.6* 5.6* 5.6* 5.6* 5.7 9.7* 9.7* 9.7* 3.2 5.7 5.4 6.4* 2.1 3.7 3.5 4.5* - - - - 2.0 3.5 3.4 3.8* 6.2
-3 m - - - - 5.8 8.0* 8.0* 8.0* 3.2 5.3* 5.3* 5.3* - - - - - - - - 2.7 4.4* 4.4* 4.4* 5.1
6m - - - - - - - - - - - - 2.5 2.5* 2.5* 2.5* - - - - 2.0* 2.0* 2.3* 2.0* 6.3
4.5 m - - - - - - - - - - - - 2.5 3.2* 3.2* 3.2* - - - - 1.9 1.9* 2.0* 1.9* 7.1
4.5m
mono boom 3m - - - - - - - - 3.7 4.2* 4.2* 4.2* 2.4 3.6* 3.6* 3.6* - - - - 1.6 1.9* 2.0* 1.9* 7.5
3.1m
1.5 m - - - - 6.1 8.5* 8.5* 8.5* 3.4 5.3* 5.3* 5.3* 2.2 3.9 3.7 4.1* 1.6 2.3* 2.3* 2.3* 1.6 2.0* 1.9* 2.0* 7.6
dipper arm
Front dozer blade 0m 2.5* 2.5* 2.5* 2.5* 5.7 7.7* 7.7* 7.7* 3.2 5.8 5.5 6.2* 2.1 3.7 3.5 4.5* - - - - 1.6 2.3* 1.9* 2.3* 7.3
Rear outriggers
-1.5 m 4.9* 4.9* 4.9* 4.9* 5.6 9.9* 9.9* 9.9* 3.1 5.7 5.3 6.4* 2.1 3.7 3.5 4.6* - - - - 1.8 2.8* 1.9* 2.8* 6.8
-3 m 8.0* 8.0* 8.0* 8.0* 5.7 8.7* 8.7* 8.7* 3.1 5.7 5.4 5.8* - - - - - - - - 2.3 4.0 1.6 4.1* 5.7
6m - - - - - - - - - - - - 2.7 3.2* 3.2* 3.2* - - - - 2.7 3.2* 3.2* 3.2* 6.0
4.5 m - - - - - - - - - - - - 2.7 3.6* 3.6* 3.6* - - - - 2.2 3.1* 3.1* 3.1* 6.9
4.5m
mono boom 3m - - - - - - - - 3.9 4.6* 4.6* 4.6* 2.6 4.0* 4.0* 4.0* - - - - 1.9 3.1* 3.0 3.1* 7.3
2.95m
1.5 m - - - - - - - - 3.7 5.8* 5.8* 5.8* 2.5 4.1 3.9 4.5* - - - - 1.9 3.0 2.9 3.4* 7.4
grab arm
Front dozer blade 0m - - - - 6.1 7.9* 7.9* 7.9* 3.5 6.1 5.7 6.6* 2.4 4.0 3.8 4.9* - - - - 1.9 3.1 3.0 3.8* 7.1
Rear outriggers
-1.5 m 5.4* 5.4* 5.4* 5.4* 6.0 1.3* 1.3* 1.3* 3.4 6.0 5.6 6.7* 2.4 3.9 3.8 4.9* - - - - 2.1 3.5 3.3 4.4* 6.6
-3 m 9.3* 9.3* 9.3* 9.3* 6.1 8.9* 8.9* 8.9* 3.4 6.0* 5.7 6.0* - - - - - - - - 2.7 4.5 4.3 4.6* 5.5
Notes:
1. Working pressure with Power Boost = 36 MPa.
2. The above values are in compliance with ISO standard 10 567. They do not exceed 87 % of hydraulic lifting capacity or 75 % of tipping load, with the machine on firm, level ground.
3. Load capacities marked with an asterisk (*) are limited by machine‘s hydraulic lifting capacity rather than tipping load.

21
LIFTING CAPACITY.
At the arm end, without bucket and quick fit. Unit: 1 000 kg.
For lifting capacity including bucket/quick fit, simply subtract actual weight of those parts from the following values. With heavy counterweight.

Reach from machine centre (u = support up/d = support down)

Across Arm end 1.5 m 3m 4.5 m 6m 7.5 m Max.
under- (bucket
carriage pivot)
Along related to Max.
under- ground
carriage level
u d u d u d u d u d u d u d u d u d u d u d u d m
6m - - - - - - - - 3.7 4.1* 4.1* 4.1* - - - - - - - - 3.1 3.4* 3.4* 3.4* 4.9
4.5 m - - - - - - - - 3.6 4.1 4.3* 4.3* - - - - - - - - 2.3 2.6 3.2* 3.2* 5.9
4.5m 3m - - - - 6.1 7.1 8.0* 8.0* 3.4 3.9 5.2* 5.2* 2.2 2.5 3.6 4.3* - - - - 2.0 2.3 3.3 3.3* 6.4
mono boom
2m 1.5 m - - - - - - - - 3.2 3.6 5.5 6.1* 2.1 2.4 3.5 4.6* - - - - 1.9 2.1 3.1 3.6* 6.5
dipper arm
Blade rear 0m - - - - 5.4 6.4 7.1* 7.1* 3.0 3.5 5.3 6.5* 2.1 2.4 3.5 4.8* - - - - 2.0 2.2 3.3 4.2* 6.3
-1.5 m - - - - 5.5 6.5 9.1* 9.1* 3.0 3.5 5.3 6.2* - - - - - - - - 2.3 2.6 3.9 4.7* 5.6
-3 m - - - - 5.6 6.6 6.8* 6.8* - - - - - - - - - - - - 3.4 3.9 4.6* 4.6* 4.3
6m - - - - - - - - - - - - - - - - - - - - 2.7 2.7* 2.7* 2.7* 5.5
4.5 m - - - - - - - - 3.6 3.9* 3.9* 3.9* 2.3 2.6 3.7* 3.7* - - - - 2.0 2.3 2.5* 2.5* 6.4
4.5m 3m - - - - 6.3 7.0* 7.0* 7.0* 3.4 3.9 4.8* 4.8* 2.2 2.5 3.6 4.0* - - - - 1.8 2.0 2.6* 2.6* 6.8
mono boom
2.45m 1.5 m - - - - 5.6 6.6 6.7* 6.7* 3.2 3.6 5.5 5.8* 2.1 2.4 3.5 4.4* - - - - 1.7 1.9 2.8* 2.8* 6.9
dipper arm
Blade rear 0m - - - - 5.4 6.3 7.3* 7.3* 3.0 3.5 5.3 6.4* 2.0 2.3 3.4 4.7* - - - - 1.7 2.0 2.9 3.2* 6.7
-1.5 m 5.9* 5.9* 5.9* 5.9* 5.4 6.3 9.6* 9.6* 3.0 3.4 5.2 6.3* 2.0 2.3 3.4 4.4* - - - - 2.0 2.3 3.4 4.2* 6.1
-3 m - - - - 5.5 6.5 7.7* 7.7* 3.0 3.5 5.1* 5.1* - - - - - - - - 2.7 3.1 4.5* 4.5* 4.9
6m - - - - - - - - - - - - - - - - - - - - 2.5* 2.5* 2.5* 2.5* 5.7
4.5 m - - - - - - - - 3.7 3.7* 3.7* 3.7* 2.3 2.6 3.6* 3.6* - - - - 2.0 2.2 2.4* 2.4* 6.5
4.5m 3m - - - - 6.3 6.7* 6.7* 6.7* 3.4 3.9 4.7* 4.7* 2.2 2.5 3.7 3.9* - - - - 1.7 2.0 2.4* 2.4* 7.0
mono boom
2.6m 1.5 m - - - - 5.6 6.6 7.6* 7.6* 3.2 3.7 5.5 5.7* 2.1 2.4 3.5 4.4* - - - - 1.6 1.9 2.6* 2.6* 7.1
dipper arm
Blade rear 0m - - - - 5.4 6.3 7.3* 7.3* 3.0 3.5 5.3 6.4* 2.0 2.3 3.4 4.7* - - - - 1.7 1.9 2.8 3.0* 6.8
-1.5 m 5.6* 5.6* 5.6* 5.6* 5.3 6.3 9.7* 9.7* 3.0 3.4 5.2 6.4* 2.0 2.3 3.4 4.5* - - - - 1.9 2.2 3.2 3.8* 6.2
-3 m - - - - 5.5 6.4 8.0* 8.0* 3.0 3.5 5.3 5.3* - - - - - - - - 2.6 2.9 4.4 4.4* 5.1
6m - - - - - - - - - - - - 2.3 2.5* 2.5* 2.5* - - - - 2.0* 2.0* 2.3* 2.0* 6.3
4.5 m - - - - - - - - - - - - 2.3 2.6 3.2* 3.2* - - - - 1.7 1.9* 2.0* 1.9* 7.1
4.5m 3m - - - - - - - - 3.5 4.0 4.2* 4.2* 2.2 2.5 3.6* 3.6* - - - - 1.5 1.8 2.0* 1.9* 7.5
mono boom
3.1m 1.5 m - - - - 5.8 6.8 8.5* 8.5* 3.2 3.7 5.3* 5.3* 2.1 2.4 3.5 4.1* 1.5 1.7 2.3* 2.3* 1.5 1.7 1.9* 2.0* 7.6
dipper arm
Blade rear 0m 2.5* 2.5* 2.5* 2.5* 5.3 6.3 7.7* 7.7* 3.0 3.5 5.3 6.2* 2.0 2.3 3.4 4.5* - - - - 1.5 1.7 1.7* 2.3* 7.3
-1.5 m 4.9* 4.9* 4.9* 4.9* 5.3 6.2 9.9* 9.9* 2.9 3.4 5.2 6.4* 1.9 2.2 3.4 4.6* - - - - 1.7 1.9 1.9 2.8* 6.8
-3 m 8.0* 8.0* 8.0* 8.0* 5.3 6.3 8.7* 8.7* 2.9 3.4 5.2 5.8* - - - - - - - - 2.1 2.4 1.5 4.1* 5.7
6m - - - - - - - - - - - - 2.5 2.9 3.2* 3.2* - - - - 2.5 2.8 3.2* 3.2* 6.0
4.5 m - - - - - - - - - - - - 2.5 2.8 3.6* 3.6* - - - - 2.1 2.3 3.1* 3.1* 6.9
4.5m 3m - - - - - - - - 3.7 4.2 4.6* 4.6* 2.5 2.8 3.9 4.0* - - - - 1.8 2.1 2.9 3.1* 7.3
mono boom
2.95m 1.5 m - - - - - - - - 3.5 3.9 5.8* 5.8* 2.3 2.6 3.8 4.5* - - - - 1.8 2.0 2.8 3.4* 7.4
grab arm
Blade rear 0m - - - - 5.7 6.7 7.9* 7.9* 3.3 3.7 5.6 6.6* 2.3 2.6 3.7 4.9* - - - - 1.8 2.0 2.9 3.8* 7.1
-1.5 m 5.4* 5.4* 5.4* 5.4* 5.6 6.6 1.3* 1.3* 3.2 3.7 5.5 6.7* 2.2 2.5 3.6 4.9* - - - - 2.0 2.3 3.2 4.4* 6.6
-3 m 9.3* 9.3* 9.3* 9.3* 5.7 6.7 8.9* 8.9* 3.2 3.7 5.5 6.0* - - - - - - - - 2.5 2.9 4.1 4.6* 5.5
Notes:
1. Working pressure with Power Boost = 36 MPa.
2. The above values are in compliance with ISO standard 10 567. They do not exceed 87 % of hydraulic lifting capacity or 75 % of tipping load, with the machine on firm, level ground.
3. Load capacities marked with an asterisk (*) are limited by machine‘s hydraulic lifting capacity rather than tipping load.

22
 At the arm end, without bucket and quick fit. Unit: 1 000 kg.
For lifting capacity including bucket/quick fit, simply subtract actual weight of those parts from the following values. With heavy counterweight.

Reach from machine centre (u = support up/d = support down)

Across Arm end 1.5 m 3m 4.5 m 6m 7.5 m Max.
under- (bucket
carriage pivot)
Along related to Max.
under- ground
carriage level
u d u d u d u d u d u d u d u d u d u d u d u d m
7.5 m - - - - - - - - - - - - - - - - - - - - 4.4* 4.4* 4.4* 4.4* 3.5
6m - - - - - - - - 3.9 4.1* 4.1* 4.1* - - - - - - - - 2.9 3.5* 3.5* 3.5* 5.3
4.7m 4.5 m - - - - 5.6* 5.6* 5.6* 5.6* 3.8 4.4* 4.4* 4.4* 2.4 4.0 3.8 4.0* - - - - 2.2 3.2* 3.2* 3.2* 6.2
2-piece boom
2m 3m - - - - - - - - 3.5 5.3* 5.3* 5.3* 2.3 3.9 3.7 4.2* - - - - 1.9 3.2* 3.1 3.2* 6.7
dipper arm 1.5 m - - - - - - - - 3.2 5.8 5.5 6.1* 2.2 3.8 3.6 4.5* - - - - 1.8 3.1 3.0 3.4* 6.8
Front dozer blade
Rear outriggers 0m - - - - 5.0* 5.0* 5.0* 5.0* 3.1 5.6 5.4 6.3* 2.1 3.7 3.5 4.6* - - - - 1.9 3.3 3.1 3.9* 6.5
-1.5 m - - - - 5.6 8.5* 8.5* 8.5* 3.1 5.6 5.4 5.9* - - - - - - - - 2.2 3.8 3.6 4.1* 5.9
-3 m - - - - - - - - - - - - - - - - - - - - - - - - -
7.5 m - - - - - - - - - - - - - - - - - - - - 3.3* 3.3* 3.3* 3.3* 4.3
6m - - - - - - - - 3.6* 3.6* 3.6* 3.6* - - - - - - - - 2.5 2.7* 2.7* 2.7* 5.8
4.7m 4.5 m - - - - - - - - 3.8 4.0* 4.0* 4.0* 2.4 3.7* 3.7* 3.7* - - - - 2.0 2.5* 2.5* 2.5* 6.7
2-piece boom
2.45m 3m - - - - 6.4 7.4* 7.4* 7.4* 3.5 4.9* 4.9* 4.9* 2.3 3.9 3.7 4.0* - - - - 1.7 2.6* 2.6* 2.6* 7.1
dipper arm 1.5 m - - - - - - - - 3.2 5.8 5.5 5.8* 2.2 3.7 3.6 4.4* - - - - 1.6 2.7* 2.7* 2.7* 7.2
Front dozer blade
Rear outriggers 0m - - - - 5.4* 5.4* 5.4* 5.4* 3.1 5.6 5.3 6.3* 2.1 3.6 3.5 4.6* - - - - 1.7 2.9 2.8 3.0* 7.0
-1.5 m - - - - 5.5 9.0* 9.0* 9.0* 3.0 5.5 5.3 6.1* 2.0 3.6 3.5 4.3* - - - - 1.9 3.3 3.2 3.7* 6.4
-3 m - - - - - - - - - - - - - - - - - - - - - - - - -
7.5 m - - - - - - - - 3.1* 3.1* 3.1* 3.1* - - - - - - - - 3.0* 3.0* 3.0* 3.0* 4.5
6m - - - - - - - - 3.5* 3.5* 3.5* 3.5* 2.4 2.6* 2.6* 2.6* - - - - 2.4 2.5* 2.5* 2.5* 6.0
4.7m 4.5 m - - - - - - - - 3.8 3.9* 3.9* 3.9* 2.4 3.6* 3.6* 3.6* - - - - 1.9 2.4* 2.4* 2.4* 6.8
2-piece boom
2.6m 3m - - - - 6.5 7.1* 7.1* 7.1* 3.6 4.8* 4.8* 4.8* 2.3 3.9 3.7 3.9* - - - - 1.7 2.4* 2.4* 2.4* 7.3
dipper arm 1.5 m - - - - - - - - 3.3 5.7* 5.6 5.7* 2.2 3.8 3.6 4.3* - - - - 1.6 2.5* 2.5* 2.5* 7.4
Front dozer blade
Rear outriggers 0m - - - - 5.5 5.5* 5.5* 5.5* 3.1 5.6 5.3 6.2* 2.1 3.6 3.5 4.5* - - - - 1.6 2.8* 2.7 2.8* 7.1
-1.5 m - - - - 5.4 9.0* 9.0* 9.0* 3.0 5.5 5.3 6.1* 2.0 3.6 3.5 4.4* - - - - 1.8 3.2 3.1 3.4* 6.5
-3 m - - - - - - - - - - - - - - - - - - - - - - - - -
7.5 m - - - - - - - - 3.2* 3.2* 3.2* 3.2* - - - - - - - - 2.3* 2.3* 2.3* 2.3* 5.3
6m - - - - - - - - - - - - 2.5 3.0* 3.0* 3.0* - - - - 2.0* 2.0* 2.3* 2.0* 6.6
4.7m 4.5 m - - - - - - - - 3.4* 3.4* 3.4* 3.4* 2.4 3.2* 3.2* 3.2* - - - - 1.7 1.9* 2.0* 1.9* 7.4
2-piece boom
3.1m 3m - - - - 6.0* 6.0* 6.0* 6.0* 3.6 4.3* 4.3* 4.3* 2.3 3.6* 3.6* 3.6* 1.6 2.7* 2.6 2.7* 1.5 1.9* 2.0* 1.9* 7.8
dipper arm 1.5 m - - - - 5.9 7.3* 7.3* 7.3* 3.3 5.4* 5.4* 5.4* 2.2 3.8 3.6 4.1* 1.5 2.7 2.6 3.2* 1.4 2.0* 1.9* 2.0* 7.8
Front dozer blade
Rear outriggers 0m - - - - 5.4 5.8* 5.8* 5.8* 3.1 5.6 5.3 6.1* 2.0 3.6 3.5 4.4* 1.5 2.6 2.5 2.8* 1.4 2.2* 1.7* 2.2* 7.6
-1.5 m - - - - 5.3 8.1* 8.1* 8.1* 2.9 5.5 5.2 6.2* 2.0 3.6 3.4 4.4* - - - - 1.6 2.6* 1.9* 2.6* 7.1
-3 m - - - - 5.4 8.2* 8.2* 8.2* 3.0 5.5* 5.2 5.5* 2.0 3.6 3.4 3.7* - - - - 2.0 3.6 1.5 3.6* 6.0
7.5 m - - - - - - - - 3.6* 3.6* 3.6* 3.6* - - - - - - - - 3.5 3.6* 3.6* 3.6* 5.0
6m - - - - - - - - 3.4* 3.4* 3.4* 3.4* 2.7 3.5* 3.5* 3.5* - - - - 2.4 3.2* 3.2* 3.2* 6.4
4.7m 4.5 m - - - - - - - - 3.8* 3.8* 3.8* 3.8* 2.7 3.6* 3.6* 3.6* - - - - 2.0 3.1* 3.1* 3.1* 7.2
2-piece boom
2.95m 3m - - - - - - - - 3.9 4.8* 4.8* 4.8* 2.5 4.0* 4.0* 4.0* 1.8 2.9 2.8 3.4* 1.8 2.9 2.8 3.1* 7.6
grab arm 1.5 m - - - - - - - - 3.6 5.8* 5.8* 5.8* 2.4 4.0 3.8 4.4* 1.8 2.9 2.8 3.8* 1.7 2.8 2.7 3.3* 7.7
Front dozer blade
Rear outriggers 0m - - - - - - - - 3.3 5.9 5.6 6.5* 2.3 3.9 3.7 4.8* - - - - 1.7 2.9 2.8 3.6* 7.4
-1.5 m - - - - 5.7 8.9* 8.9* 8.9* 3.3 5.8 5.5 6.5* 2.3 3.8 3.7 4.7* - - - - 1.9 3.2 3.1 3.9* 6.9
-3 m - - - - - - - - 3.3 5.7* 5.6 5.7* - - - - - - - - 2.4 4.1 3.9 4.2* 5.7
Notes:
1. Working pressure with Power Boost = 36 MPa.
2. The above values are in compliance with ISO standard 10 567. They do not exceed 87 % of hydraulic lifting capacity or 75 % of tipping load, with the machine on firm, level ground.
3. Load capacities marked with an asterisk (*) are limited by machine‘s hydraulic lifting capacity rather than tipping load.

23
LIFTING CAPACITY.
At the arm end, without bucket and quick fit. Unit: 1 000 kg.
For lifting capacity including bucket/quick fit, simply subtract actual weight of those parts from the following values. With heavy counterweight.

Reach from machine centre (u = support up/d = support down)

Across Arm end 1.5 m 3m 4.5 m 6m 7.5 m Max.
under- (bucket
carriage pivot)
Along related to Max.
under- ground
carriage level
u d u d u d u d u d u d u d u d u d u d u d u d m
7.5 m - - - - - - - - - - - - - - - - - - - - 4.4* 4.4* 4.4* 4.4* 3.5
6m - - - - - - - - 3.7 4.1* 4.1* 4.1* - - - - - - - - 2.8 3.1 3.5* 3.5* 5.3

4.7m 4.5 m - - - - 5.6* 5.6* 5.6* 5.6* 3.6 4.0 4.4* 4.4* 2.2 2.5 3.7 4.0* - - - - 2.1 2.3 3.2* 3.2* 6.2
2-piece boom 3m - - - - - - - - 3.3 3.7 5.3* 5.3* 2.1 2.4 3.6 4.2* - - - - 1.8 2.0 3.0 3.2* 6.7
2m
dipper arm 1.5 m - - - - - - - - 3.0 3.5 5.3 6.1* 2.0 2.3 3.5 4.5* - - - - 1.7 1.9 2.9 3.4* 6.8
Blade rear 0m - - - - 5.0* 5.0* 5.0* 5.0* 2.9 3.3 5.2 6.3* 2.0 2.2 3.4 4.6* - - - - 1.8 2.0 3.0 3.9* 6.5
-1.5 m - - - - 5.2 6.1 8.5* 8.5* 2.9 3.3 5.2 5.9* - - - - - - - - 2.0 2.3 3.5 4.1* 5.9
-3 m - - - - - - - - - - - - - - - - - - - - - - - - -
7.5 m - - - - - - - - - - - - - - - - - - - - 3.3* 3.3* 3.3* 3.3* 4.3
6m - - - - - - - - 3.6* 3.6* 3.6* 3.6* - - - - - - - - 2.4 2.7 2.7* 2.7* 5.8

4.7m 4.5 m - - - - - - - - 3.6 4.0* 4.0* 4.0* 2.3 2.5 3.7* 3.7* - - - - 1.8 2.1 2.5* 2.5* 6.7
2-piece boom 3m - - - - 6.1 7.0 7.4* 7.4* 3.3 3.8 4.9* 4.9* 2.1 2.4 3.6 4.0* - - - - 1.6 1.8 2.6* 2.6* 7.1
2.45m
dipper arm 1.5 m - - - - - - - - 3.0 3.5 5.4 5.8* 2.0 2.3 3.5 4.4* - - - - 1.5 1.7 2.6 2.7* 7.2
Blade rear 0m - - - - 5.1 5.4* 5.4* 5.4* 2.9 3.3 5.2 6.3* 1.9 2.2 3.4 4.6* - - - - 1.6 1.8 2.7 3.0* 7.0
-1.5 m - - - - 5.1 6.0 9.0* 9.0* 2.8 3.2 5.1 6.1* 1.9 2.2 3.3 4.3* - - - - 1.8 2.0 3.1 3.7* 6.4
-3 m - - - - - - - - - - - - - - - - - - - - - - - - -
7.5 m - - - - - - - - 3.1* 3.1* 3.1* 3.1* - - - - - - - - 3.0* 3.0* 3.0* 3.0* 4.5
6m - - - - - - - - 3.5* 3.5* 3.5* 3.5* 2.3 2.6 2.6* 2.6* - - - - 2.3 2.5* 2.5* 2.5* 6.0

4.7m 4.5 m - - - - - - - - 3.6 3.9* 3.9* 3.9* 2.3 2.5 3.6* 3.6* - - - - 1.8 2.0 2.4* 2.4* 6.8
2-piece boom 3m - - - - 6.2 7.1* 7.1* 7.1* 3.4 3.8 4.8* 4.8* 2.2 2.4 3.6 3.9* - - - - 1.6 1.8 2.4* 2.4* 7.3
2.6m
dipper arm 1.5 m - - - - - - - - 3.1 3.5 5.4 5.7* 2.0 2.3 3.5 4.3* - - - - 1.5 1.7 2.5* 2.5* 7.4
Blade rear 0m - - - - 5.1 5.5* 5.5* 5.5* 2.9 3.3 5.2 6.2* 1.9 2.2 3.4 4.5* - - - - 1.5 1.7 2.6 2.8* 7.1
-1.5 m - - - - 5.1 6.0 9.0* 9.0* 2.8 3.2 5.1 6.1* 1.9 2.2 3.3 4.4* - - - - 1.7 1.9 3.0 3.4* 6.5
-3 m - - - - - - - - - - - - - - - - - - - - - - - - -
7.5 m - - - - - - - - 3.2* 3.2* 3.2* 3.2* - - - - - - - - 2.3* 2.3* 2.3* 2.3* 5.3
6m - - - - - - - - - - - - 2.3 2.6 3.0* 3.0* - - - - 1.9 2.0* 2.3* 2.0* 6.6

4.7m 4.5 m - - - - - - - - 3.4* 3.4* 3.4* 3.4* 2.3 2.6 3.2* 3.2* - - - - 1.6 1.8 2.0* 1.9* 7.4
2-piece boom 3m - - - - 6.0* 6.0* 6.0* 6.0* 3.4 3.9 4.3* 4.3* 2.2 2.5 3.6* 3.6* 1.5 1.7 2.5 2.7* 1.4 1.6 1.9* 1.9* 7.8
3.1m
dipper arm 1.5 m - - - - 5.5 6.4 7.3* 7.3* 3.1 3.5 5.4* 5.4* 2.0 2.3 3.5 4.1* 1.4 1.6 2.5 3.2* 1.3 1.5 1.9* 2.0* 7.8
Blade rear 0m - - - - 5.1 5.8* 5.8* 5.8* 2.9 3.3 5.2 6.1* 1.9 2.2 3.3 4.4* 1.4 1.6 2.4 2.8* 1.3 1.5 1.6* 2.2* 7.6
-1.5 m - - - - 5.0 5.9 8.1* 8.1* 2.7 3.2 5.0 6.2* 1.8 2.1 3.3 4.4* - - - - 1.5 1.7 1.9 2.6* 7.1
-3 m - - - - 5.1 6.0 8.2* 8.2* 2.8 3.2 5.1 5.5* 1.9 2.2 3.3 3.7* - - - - 1.9 2.1 1.4 3.6* 6.0
7.5 m - - - - - - - - 3.6* 3.6* 3.6* 3.6* - - - - - - - - 3.3 3.6* 3.6* 3.6* 5.0
6m - - - - - - - - 3.4* 3.4* 3.4* 3.4* 2.5 2.8 3.5* 3.5* - - - - 2.3 2.5 3.2* 3.2* 6.4
4.5 m - - - - - - - - 3.8* 3.8* 3.8* 3.8* 2.5 2.8 3.6* 3.6* - - - - 1.9 2.1 3.0 3.1* 7.2
4.7m
2-piece boom 3m - - - - - - - - 3.7 4.1 4.8* 4.8* 2.4 2.7 3.9 4.0* 1.7 1.9 2.7 3.4* 1.7 1.9 2.7 3.1* 7.6
2.95m Grab arm 1.5 m - - - - - - - - 3.4 3.8 5.7 5.8* 2.3 2.5 3.7 4.4* 1.7 1.8 2.7 3.8* 1.6 1.8 2.6 3.3* 7.7
Blade rear
0m - - - - - - - - 3.1 3.6 5.4 6.5* 2.2 2.4 3.6 4.8* - - - - 1.6 1.8 2.7 3.6* 7.4
-1.5 m - - - - 5.4 6.3 8.9* 8.9* 3.1 3.5 5.3 6.5* 2.1 2.4 3.5 4.7* - - - - 1.8 2.0 3.0 3.9* 6.9
-3 m - - - - - - - - 3.1 3.5 5.4 5.7* - - - - - - - - 2.3 2.6 3.8 4.2* 5.7
Notes:
1. Working pressure with Power Boost = 36 MPa.
2. The above values are in compliance with ISO standard 10 567. They do not exceed 87 % of hydraulic lifting capacity or 75 % of tipping load, with the machine on firm, level ground.
3. Load capacities marked with an asterisk (*) are limited by machine‘s hydraulic lifting capacity rather than tipping load.

24
 At the arm end, without bucket and quick fit. Unit: 1 000 kg.
For lifting capacity including bucket/quick fit, simply subtract actual weight of those parts from the following values. With heavy counterweight.

Reach from machine centre (u = support up/d = support down)

Across Arm end 1.5 m 3m 4.5 m 6m 7.5 m Max.
under- (bucket
carriage pivot)
Along related to Max.
under- ground
carriage level
u d u d u d u d u d u d u d u d u d u d u d u d m
6m - - - - - - - - 3.7 3.7* 3.7* 3.7* - - - - - - - - 2.8 3.2 3.3* 3.3* 5.2
4.5 m - - - - - - - - 3.5 4.0 4.1* 4.1* 2.2 2.5 3.7 3.7* - - - - 2.1 2.4 3.2* 3.2* 6.2
4.75m
mono offset 3m - - - - - - - - 3.2 3.7 5.0* 5.0* 2.1 2.4 3.5 4.0* - - - - 1.8 2.0 3.0 3.3* 6.6
boom
1.5 m - - - - - - - - 2.9 3.4 5.2 5.8* 1.9 2.3 3.4 4.3* - - - - 1.6 1.9 2.9 3.6* 6.7
2m
dipper arm 0m - - - - 4.9 5.9 5.9* 5.9* 2.7 3.2 5.0 6.2* 1.9 2.2 3.3 4.5* - - - - 1.7 1.9 3.0 4.1* 6.5
Blade rear
-1.5 m - - - - 4.9 5.9 8.5* 8.5* 2.7 3.2 5.0 5.9* - - - - - - - - 1.9 2.2 3.4 4.3* 5.8
-3 m - - - - 5.1 6.1 6.7* 6.7* 2.8 3.3 4.5* 4.5* - - - - - - - - 2.8 3.2 4.4* 4.4* 4.6
6m - - - - - - - - - - - - - - - - - - - - 2.4 2.6* 2.6* 2.6* 5.7
4.5 m - - - - - - - - 3.6 3.7* 3.7* 3.7* 2.2 2.5 3.4* 3.4* - - - - 1.8 2.1 2.5* 2.5* 6.6
4.75m
mono offset 3m - - - - 6.0 7.0* 7.0* 7.0* 3.3 3.8 4.6* 4.6* 2.1 2.4 3.6 3.7* - - - - 1.6 1.8 2.6* 2.6* 7.0
boom
1.5 m - - - - 4.9* 4.9* 4.9* 4.9* 2.9 3.4 5.3 5.5* 1.9 2.2 3.4 4.1* - - - - 1.5 1.7 2.6 2.8* 7.1
2.45m
dipper arm 0m - - - - 4.8 5.8 6.2* 6.2* 2.7 3.2 5.0 6.0* 1.8 2.1 3.3 4.4* - - - - 1.5 1.7 2.7 3.3* 6.9
Blade rear
-1.5 m 5.6* 5.6* 5.6* 5.6* 4.8 5.8 8.9* 8.9* 2.6 3.1 4.9 6.0* 1.8 2.1 3.2 4.3* - - - - 1.7 2.0 3.0 4.0* 6.3
-3 m - - - - 5.0 5.9 7.4* 7.4* 2.7 3.2 5.0 5.1* - - - - - - - - 2.3 2.6 4.1 4.2* 5.2
6m - - - - - - - - - - - - - - - - - - - - 2.3 2.4* 2.4* 2.4* 5.9
4.5 m - - - - - - - - 3.6* 3.6* 3.6* 3.6* 2.2 2.6 3.3* 3.3* - - - - 1.8 2.1 2.3* 2.3* 6.7
4.75m
mono offset 3m - - - - 6.1 6.7* 6.7* 6.7* 3.3 3.8 4.5* 4.5* 2.1 2.4 3.6 3.7* - - - - 1.5 1.8 2.4* 2.4* 7.2
boom
1.5 m - - - - 5.1 5.6* 5.6* 5.6* 3.0 3.4 5.3 5.4* 1.9 2.3 3.4 4.1* - - - - 1.4 1.7 2.5 2.6* 7.3
2.6m
dipper arm 0m - - - - 4.8 5.8 6.3* 6.3* 2.7 3.2 5.0 6.0* 1.8 2.1 3.3 4.4* - - - - 1.4 1.7 2.6 3.1* 7.0
Blade rear
-1.5 m 5.4* 5.4* 5.4* 5.4* 4.8 5.8 9.1* 9.1* 2.6 3.1 4.9 6.0* 1.8 2.1 3.2 4.3* - - - - 1.6 1.9 2.9 3.9* 6.4
-3 m - - - - 4.9 5.9 7.7* 7.7* 2.7 3.2 5.0 5.2* - - - - - - - - 2.1 2.5 3.9 4.1* 5.4
6m - - - - - - - - - - - - 2.3 2.7* 2.7* 2.7* - - - - 1.9* 1.9* 1.9* 1.9* 6.5
4.5 m - - - - - - - - - - - - 2.3 3.0* 3.0* 3.0* - - - - 1.6 1.9* 1.9* 1.9* 7.2
4.75m
mono offset 3m - - - - 5.6* 5.6* 5.6* 5.6* 3.4 4.0* 4.0* 4.0* 2.1 3.4* 3.4* 3.4* 1.4 2.4* 2.4* 2.4* 1.4 1.9* 1.9* 1.9* 7.6
boom
1.5 m - - - - 5.3 8.3* 8.3* 8.3* 3.0 5.1* 5.1* 5.1* 2.0 3.7 3.4 3.9* 1.3 2.6 2.4 2.9* 1.3 2.1* 1.6* 2.1* 7.7
3.1m
dipper arm 0m - - - - 4.8 6.6* 6.6* 6.6* 2.7 5.5 5.0 5.8* 1.8 3.6 3.3 4.2* 1.3 2.4* 2.3 2.4* 1.3 2.4* 1.9 2.4* 7.5
Blade rear
-1.5 m 4.7* 4.7* 4.7* 4.7* 4.7 8.7* 8.7* 8.7* 2.6 5.4 4.9 6.0* 1.7 3.5 3.2 4.3* - - - - 1.4 2.8 1.4 2.9* 7.0
-3 m 7.5* 7.5* 7.5* 7.5* 4.8 8.3* 8.3* 8.3* 2.6 5.4 4.9 5.5* - - - - - - - - 1.8 3.5 2.1 3.8* 6.0
6m - - - - - - - - - - - - 2.5 2.9 3.2* 3.2* - - - - 2.4 2.7 3.1* 3.1* 6.2
4.5 m - - - - - - - - - - - - 2.5 2.8 3.3* 3.3* - - - - 1.9 2.1 3.1 3.1* 7.0
4.75m
mono offset 3m - - - - - - - - 3.6 4.1 4.5* 4.5* 2.4 2.7 3.7* 3.7* - - - - 1.7 1.9 2.7 3.2* 7.4
boom
1.5 m - - - - - - - - 3.3 3.7 5.5* 5.5* 2.2 2.5 3.7 4.2* 1.6 1.8 2.6 3.6* 1.6 1.8 2.6 3.4* 7.5
2.95m
grab arm 0m - - - - 5.2 6.2 6.8* 6.8* 3.0 3.5 5.3 6.2* 2.1 2.4 3.5 4.6* - - - - 1.6 1.8 2.7 3.8* 7.3
Blade rear
-1.5 m 5.2* 5.2* 5.2* 5.2* 5.1 6.1 9.6* 9.6* 2.9 3.4 5.2 6.3* 2.0 2.3 3.4 4.6* - - - - 1.7 2.0 2.9 4.0* 6.7
-3 m 8.7* 8.7* 8.7* 8.7* 5.2 6.1 8.5* 8.5* 2.9 3.4 5.2 5.8* - - - - - - - - 2.1 2.5 3.7 4.3* 5.7
Notes:
1. Working pressure with Power Boost = 36 MPa.
2. The above values are in compliance with ISO standard 10 567. They do not exceed 87 % of hydraulic lifting capacity or 75 % of tipping load, with the machine on firm, level ground.
3. Load capacities marked with an asterisk (*) are limited by machine‘s hydraulic lifting capacity rather than tipping load.

25
LIFTING CAPACITY.
At the arm end, without bucket and quick fit. Unit: 1 000 kg.
For lifting capacity including bucket/quick fit, simply subtract actual weight of those parts from the following values. With heavy counterweight.

Reach from machine centre (u = support up/d = support down)

Across Arm end 1.5 m 3m 4.5 m 6m 7.5 m Max.
under- (bucket
carriage pivot)
Along related to Max.
under- ground
carriage level
u d u d u d u d u d u d u d u d u d u d u d u d m
6m - - - - - - - - 3.7* 3.7* 3.7* 3.7* - - - - - - - - 3.0 3.3* 3.3* 3.3* 5.2

4.75m 4.5 m - - - - - - - - 3.7 4.1* 4.1* 4.1* 2.3 3.7* 3.7* 3.7* - - - - 2.2 3.2* 3.2* 3.2* 6.2
mono offset 3m - - - - - - - - 3.4 5.0* 5.0* 5.0* 2.2 3.9 3.7 4.0* - - - - 1.9 3.3 3.1 3.3* 6.6
boom
2m 1.5 m - - - - - - - - 3.1 5.7 5.4 5.8* 2.1 3.7 3.5 4.3* - - - - 1.8 3.1 3.0 3.6* 6.7
dipper arm
Front dozer blade 0m - - - - 5.2 5.9* 5.9* 5.9* 2.9 5.5 5.2 6.2* 2.0 3.6 3.4 4.5* - - - - 1.8 3.2 3.1 4.1* 6.5
Rear outriggers -1.5 m - - - - 5.3 8.5* 8.5* 8.5* 2.9 5.5 5.2 5.9* - - - - - - - - 2.1 3.8 3.6 4.3* 5.8
-3 m - - - - 5.5 6.7* 6.7* 6.7* 3.0 4.5* 4.5* 4.5* - - - - - - - - 3.0 4.4* 4.4* 4.4* 4.6
6m - - - - - - - - - - - - - - - - - - - - 2.6 2.6* 2.6* 2.6* 5.7

4.75m 4.5 m - - - - - - - - 3.7* 3.7* 3.7* 3.7* 2.4 3.4* 3.4* 3.4* - - - - 2.0 2.5* 2.5* 2.5* 6.6
mono offset 3m - - - - 6.3 7.0* 7.0* 7.0* 3.5 4.6* 4.6* 4.6* 2.2 3.7* 3.7 3.7* - - - - 1.7 2.6* 2.6* 2.6* 7.0
boom
2.45m 1.5 m - - - - 4.9* 4.9* 4.9* 4.9* 3.1 5.5* 5.4 5.5* 2.1 3.7 3.5 4.1* - - - - 1.6 2.8 2.7 2.8* 7.1
dipper arm
Front dozer blade 0m - - - - 5.2 6.2* 6.2* 6.2* 2.9 5.5 5.2 6.0* 2.0 3.6 3.4 4.4* - - - - 1.6 2.9 2.8 3.3* 6.9
Rear outriggers -1.5 m 5.6* 5.6* 5.6* 5.6* 5.2 8.9* 8.9* 8.9* 2.8 5.4 5.1 6.0* 1.9 3.5 3.3 4.3* - - - - 1.8 3.3 3.1 4.0* 6.3
-3 m - - - - 5.3 7.4* 7.4* 7.4* 2.9 5.1* 5.1* 5.1* - - - - - - - - 2.4 4.2* 4.2* 4.2* 5.2
6m - - - - - - - - - - - - - - - - - - - - 2.4* 2.4* 2.4* 2.4* 5.9

4.75m 4.5 m - - - - - - - - 3.6* 3.6* 3.6* 3.6* 2.4 3.3* 3.3* 3.3* - - - - 1.9 2.3* 2.3* 2.3* 6.7
mono offset 3m - - - - 6.5 6.7* 6.7* 6.7* 3.5 4.5* 4.5* 4.5* 2.2 3.7* 3.7* 3.7* - - - - 1.6 2.4* 2.4* 2.4* 7.2
boom
2.6m 1.5 m - - - - 5.5 5.6* 5.6* 5.6* 3.2 5.4* 5.4* 5.4* 2.1 3.7 3.5 4.1* - - - - 1.5 2.6* 2.6 2.6* 7.3
dipper arm
Front dozer blade 0m - - - - 5.2 6.3* 6.3* 6.3* 2.9 5.5 5.2 6.0* 2.0 3.6 3.4 4.4* - - - - 1.6 2.8 2.7 3.1* 7.0
Rear outriggers -1.5 m 5.4* 5.4* 5.4* 5.4* 5.1 9.1* 9.1* 9.1* 2.8 5.4 5.1 6.0* 1.9 3.5 3.3 4.3* - - - - 1.7 3.2 3.0 3.9* 6.4
-3 m - - - - 5.3 7.7* 7.7* 7.7* 2.9 5.2* 5.2 5.2* - - - - - - - - 2.3 4.1* 4.0 4.1* 5.4
6m - - - - - - - - - - - - 2.5 2.7* 2.7* 2.7* - - - - 1.9* 1.9* 1.9* 1.9* 6.5

4.75m 4.5 m - - - - - - - - - - - - 2.4 3.0* 3.0* 3.0* - - - - 1.7 1.9* 1.9* 1.9* 7.2
mono offset 3m - - - - 5.6* 5.6* 5.6* 5.6* 3.6 4.0* 4.0* 4.0* 2.3 3.4* 3.4* 3.4* 1.5 2.4* 2.4* 2.4* 1.5 1.9* 1.9* 1.9* 7.6
boom
3.1m 1.5 m - - - - 5.7 8.3* 8.3* 8.3* 3.2 5.1* 5.1* 5.1* 2.1 3.7 3.5 3.9* 1.5 2.6 2.5 2.9* 1.4 2.1* 1.7* 2.1* 7.7
dipper arm
Front dozer blade 0m - - - - 5.2 6.6* 6.6* 6.6* 2.9 5.5 5.2 5.8* 1.9 3.6 3.4 4.2* 1.4 2.4* 2.4 2.4* 1.4 2.4* 1.9* 2.4* 7.5
Rear outriggers -1.5 m 4.7* 4.7* 4.7* 4.7* 5.0 8.7* 8.7* 8.7* 2.8 5.4 5.0 6.0* 1.9 3.5 3.3 4.3* - - - - 1.5 2.8 1.5 2.9* 7.0
-3 m 7.5* 7.5* 7.5* 7.5* 5.1 8.3* 8.3* 8.3* 2.8 5.4 5.1 5.5* - - - - - - - - 1.9 3.5 2.1 3.8* 6.0
6m - - - - - - - - - - - - 2.7 3.2* 3.2* 3.2* - - - - 2.5 3.1* 3.1* 3.1* 6.2

4.75m 4.5 m - - - - - - - - - - - - 2.6 3.3* 3.3* 3.3* - - - - 2.0 3.1* 3.1* 3.1* 7.0
mono offset 3m - - - - - - - - 3.8 4.5* 4.5* 4.5* 2.5 3.7* 3.7* 3.7* - - - - 1.8 3.0 2.8 3.2* 7.4
boom
2.95m 1.5 m - - - - - - - - 3.5 5.5* 5.5* 5.5* 2.3 4.0 3.8 4.2* 1.7 2.9 2.7 3.6* 1.7 2.8 2.7 3.4* 7.5
grab arm
Front dozer blade 0m - - - - 5.5 6.8* 6.8* 6.8* 3.2 5.8 5.5 6.2* 2.2 3.8 3.6 4.6* - - - - 1.7 2.9 2.8 3.8* 7.3
Rear outriggers -1.5 m 5.2* 5.2* 5.2* 5.2* 5.4 9.6* 9.6* 9.6* 3.1 5.7 5.4 6.3* 2.1 3.8 3.6 4.6* - - - - 1.8 3.2 3.0 4.0* 6.7
-3 m 8.7* 8.7* 8.7* 8.7* 5.5 8.5* 8.5* 8.5* 3.1 5.7 5.4 5.8* - - - - - - - - 2.3 4.0 3.8 4.3* 5.7
Notes:
1. Working pressure with Power Boost = 36 MPa.
2. The above values are in compliance with ISO standard 10 567. They do not exceed 87 % of hydraulic lifting capacity or 75 % of tipping load, with the machine on firm, level ground.
3. Load capacities marked with an asterisk (*) are limited by machine‘s hydraulic lifting capacity rather than tipping load.

26
EQUIPMENT.
STANDARD EQUIPMENT OPTIONAL EQUIPMENT SELECTION OF VOLVO OPTIONAL EQUIPMENT
Engine Electric / Electronic control system
Turbocharged, 4 stroke Volvo diesel engine with Travel alarm
water cooling, direct injection and charged air Rotating beacon
cooler that meets EU Step IIIB/Tier4 emission Extra work lights:
requirements Service walkway 1 and counterweight 1
Intake air pre-heater Boom-mounted 2
ECO- Modus Cab front 2
LED lights Boomfloat
Fuel filter and water separator
Fuel filler pump: 50 l/min with automatic shut-off Multi-channel electric centre passage
Aluminium core radiator Anti-theft system
Electric/Electronic control system Tilting and rotating attachment preparation
Contronics-computerized monitoring and diagnostic CareTrack via satellite
system Hydraulic system
Master electrical disconnect switch Hose rupture valve for dipper arm
Adjustable automatic idling system Boom float function
One-touch power boost Boom Suspension System
Adjustable monitor Hydraulic oil, biodegradable ISO VG32
Safety stop/start function Hydraulic oil, biodegradable ISO VG46
2 Frame mounted halogen lamps Hydraulic long life oil ISO VG32
Alternator,120 A Hydraulic long life oil ISO VG68
Batteries, 2 x 12 V/140 Ah Hydraulic equipment for:
Start motor, 24 V/5.5 kW Hammer & shears Boom
CareTrack via GSM Slope bucket/rotator Suspension
Rear view camera Grab/clam shell System
Undercarriage Quick fit
2-speed power transmission plus creep speed Flow control
Oscillating front axle ± 9° with out mudguards/ 6° Flow and pressure control
with mudguards Cab and interior
2-circuit travel brakes Volvo Care Cab with openable PC roof hatch /
Maintenance-free propeller shafts ROPS
Superstructure Tiltrotator Joystick
LED Rear lights Proportional control joystick
Service walkway with anti-slip grating On/off joystick
Centralised lubricating point for slew bearing Falling object guard (FOG)
Digging equipment Cab mounted falling object protective structures
Attachment points for extra hydraulics (FOPS)
Centralised lubrication point Rain shield, front
Cab and interior Side camera
Autogreasing
Volvo Care Cab with fixed roof hatch /ROPS Sunlight protection, roof hatch (steel)
Heater & air-conditioner, automatic Safety net for front window
Hydraulic dampening cab mounts Lower wiper
Adjustable operator seat and joystick control Anti-vandalism kit
console Radio with CD player and MP3 input
Adjustable steering column Ashtray
Hydraulic safety lock lever Lighter
Control joystick, with 5 switches each Seat:
Cab, all-weather sound suppressed, includes: Fabric seat, with heater
Cup holder Fabric seat, with heater and air suspension
Door locks Luxury operator seat
Safety glass, light tinted Undercarriage
Floor mat Trailer Towing System
Horn Twin tires 10.00 – 20 / 11.00 – 20
Large storage area Single tires 18R – 19.5 / 620/40-22.5 Heavy
Pull-up type front window Stone protection rings counterweight
Removable lower windshield Front dozer blade and rear outriggers
Retractable seat belt Paralell dozer balde
Windshield wiper with washer and intermittent Radial dozer blade
feature Grab holder
Sun shield,front, roof & rear Mudguards, front/rear
Master ignition key Tool box, left hand side/right hand side
Hydraulic system Cruise control
Load sensing hydraulic system Travel speed 20 km/h, 30 km/h, 35 km/h
Cylinder cushioning Digging equipment
Cylinder contamination seals Booms
Return filter of full flow type 2 000 h exchange 4.5 m mono boom
interval 4.7 m 2-piece boom
Pressure relief system (servo accumulator) 4.75 m mono offset boom
Proportional controlled visco-clutch cooling fan Dipper arms
Auto digging
Hose rupture valve for boom and arm 2.0 m, 2.45 m, 2.6 m, 3.1 m
2.95 m grab arm brake
Hydraulic long life oil ISO VG46
Hydraulic quick fit
S6 system
Universal system
OPTIONAL EQUIPMENT Attachments
Engine Buckets, direct fit and quick fit:
Diesel coolant heater with digital timer General Purpose bucket (GP)
Block heater, 240 V Heavy Duty bucket
Water separator with heater Slope bucket
Dust net Lifting eye
Tropical cooling Service
Wheel chocks
Tool kit, daily maintenance
Superstructure
Heavy counter weight Tilt rotator
License plate preparation joysticks
Ref. No 20030258-D / English-30 / 2014.04 / EXW / Volvo, Global Marketing