BOQ for Schedule No. 1.

Design Services

Qty. as Unit Price as

Item Description Unit considered by the Considered by Total Price Remarks
bidder the Bidder

1 Design services and Engineering

Detailed design (Tower Design & Foundation Design) and delivery of all documents,
1.1 No
drawings and plans for final approval

Design of D1A Type Tower - Tangent Suspension (0 to 2 Degree)- Tower Category:

1.1.1 No
Suspension

Design of D1B Type Tower - Small Line Angle Deviation (0 to 15 Degree)- Tower
1.1.2 No
Category: Strain

Design of D1C Type Tower (15 to 30 Degree) Medium Line Angle Deviation - Tower
1.1.3 No
Category : Strain

Design of D1D Type Tower (0 to 30 Degree) Line Angle Deviation / DE Anchor /

1.1.4 No
Terminal DE - Tower Category : Full Dead End

Design of D1E Type Tower (30 to 90 Degree) Light Angle Deviation / DE Anchor /
1.1.5 No
Terminal DE - Tower Category : Full Dead End

Proto Type Testing of Transmission Towers and approval including

1.2 manufacturing of prototype towers and accessories and transport the same to the
proto test lab.
Proto Type Testing of D1A Type Tower - Tangent Suspension (0 to 2 Degree)- Tower
1.2.1 No
Category: Suspension

Proto Type Testing of D1E Type Tower (30 to 90 Degree) Light Angle Deviation /
1.2.2 No
DE Anchor / Terminal DE - Tower Category : Full Dead End

Detailed line survey including check survey , preparation of plans and

longitudinal profiles, cross sectional profile for individual locations, route maps,
1.3 Km
spotting of towers using suitable softwares (PLS CADD with SAPS integration,
Auto-CAD, etc) and approval by the Engineer.

Geo Technical investigation including Ground Motion values for the area,
Seismic Analysis, measurement of soil resistivity, tower footing resistance,
1.4 Location
Standard Penetration Test (SPT) / slope and soil stability as required, laboratory
tests and submission of report.

Name of Bidder :

1 of
Signature of Bidder :

2 of
 BOQ for Schedule No. 2 (Plant, Mandatory Spares)

Qty. as Unit Price as

Country of
Item Description Unit considered by the considered by the Total Price Remarks
origin
bidder bidder

Self-supporting double circuit lattice towers with vertical

configuration of phases, two peaks - one OHGW, one OPGW,
complete with stubs along with templates or props for stub setting
1 for different type of foundations with or without body and leg
extensions as per approved design by the Engineer. A Tower
schedule along with other relevant information is available in
Section V - B1.

1.1 Galvanized Fabricated Tower Superstructure MT

1.2 Galvanized Fabricated Tower Stubs MT

2 Fastners and step bolts

2.1 Galvanized bolts and nuts MT
2.2 Step Bolts MT
2.3 Spring and Pack washer MT
Conductor, Compression joints and other accessories.
3
2.1 ACSR Moose Conductor KM
2.2 Spacer Damper for Quad ACSR Moose, Frame Style No
2.3 Mid-Span Joint for ACSR Moose No
2.4 Repair Sleeve for ACSR Moose No
2.5 Suspension Fitting with accessories like Corona Ring Set
2.6 Tension Fitting with accessories like Corona Ring Set
2.7 Jumper String Assembly with accessories Set
Any other item associated with ACSR Moose Conductor considered by
2.8
the Bidder.
Aviation Warning/ Obstruction Signals (Lights / Globules /
4
Painting)
4.1 Marker Ball OPGW No
4.2 Marker Ball OHGW No
4.3 Painting on Tower No
Aircraft Warning Light on Tower with Solar Power Supply with
4.4 Set
Battery Back-up
Any other item associated with Aircraft Warning System considered by
4.5 No
the Bidder.

5 OPGW System.
5.1 OPGW (24F, 66 kA2*sec) KM
5.2 Stockbridge Damper for OPGW (24F) No
5.3 Splice Box for OPGW (24F) No
5.4 Down Lead Clamp for OPGW (24F) No
5.5 OPGW Suspension Assembly with accessories Set
5.6 OPGW Tension Assembly with accessories Set
5.7 Joint boxes OPGW-OPGW No
5.8 Joint termination boxes OPGW-U/G FOC No
Any other item associated with OPGW System considered by the
5.9
Bidder.

3 of
 6 OHGW, Compression joints and Accessories.
6.1 OHGW 7No5 AW: 7/4.62 mm KM
6.2 Mid-Span Joint for OHGW 7No5 AW No
6.3 Stockbridge Damper for OHGW 7 No5 AW No
6.4 OHGW Suspension Assembly with accessories Set
6.5 OHGW Tension Assembly with accessories Set
Any other item associated with OHGW System considered by the
6.6
Bidder.
Porcelain Insulator sets (included: Disc Insulators, Assembly
7
fittings, Phase conductor fittings.)
7.1 120KN insulator No
7.2 160KN insulator No
7.3 Assembly fittings for insulators Set
7.4 Phase Conductor Fittings Set

Tower Earthing (normal & counterpoise type including additional

8
tower earthings).
8.1 Bend Rods & Accessories Each
8.2 Grounding Rods 2.5 mtr. And Accessories Each
8.3 Ground Conductor and Accessories Mtr.
8.4 Counterpoise Conductor with Accessories Mtr.
Any other item associated with Tower Earthing System considered by
8.5
the Bidder.
Danger Plate / Phase Plate / No. plate / Anticlimbing Device / Bird
9
Guard (Spikes) / Bird Reflectors / Bird Nesting Patforms.
9.1 Anti Climbing Device Set
9.2 Number Plate Set
9.3 Circuit Plate Set
9.4 Phase Plate Set
9.5 Danger Plate Set
9.6 Bird Guard (Spikes) No
9.7 Bird Nesting Platform No
9.8 Bird Diverters for OPGW & OHGW No
9.9 Fall-Arrest Clips Bolted to Tower Leg at Every 2 Step-Bolts No
Any other item associated with Tower accessories considered by the
9.10
Bidder.

4 of
Breakdown of Rates and Prices Schedule No. 3. Plant, Tools and Mandatory Spare Parts Supplied from Within the Employer’s
Country

Unit Price as
Qty. as considered by the
Item Description Unit considered by Total Price
bidder
the bidder
Remarks

The Bidder may list the

1 items they considered in
Price Schedule (which are
available in Employer's
Country)
2
3
4
5
6
7
8
9
10
11
12
13
14

Name of Bidder

Signature of Bidder

5 of
 BOQ for Schedule No. 4. Installation and Other Services Included all Related Civil Works

Unit Price as
Qty. as considered
Item Description Unit considered by the Total Price Remarks
by the bidder
bidder

Preliminary Works, Site Preparation and General Facilities, upgradation of existing road
1
and temporary access road/foot-trail etc.

1.1 Setting up of laydown area. [Link]

1.2 Setting up of Store yard. [Link]

This row is intentionally left
Any other Type of activity not described above but the Bidder considered by the bidder blank for bidder. The bidder
may add more rows if required
for any other type facility they
Tower Foundations along with setting of stubs using templates or props and other related envisaged.
works like Benching / Grading, excavations, stone soling, dewatering, shoring and
shuttering, reinforcement, concreting, curing, backfilling, compaction, Revetment, Stone
2 Gabion Wall, Stone / Brick masonry Wall, Stone/Concrete Drainage Ditch etc. as per
requirement, complete in all respect under different types of soil conditions . Contractor
should provide suitable corrosion protection and flood protection for tower foundations as
required.

2.1 All type of Foundation under all type of soil condition

2.1.1 Excavation CUM
2.1.2 Stone Soling CUM
2.1.3 Plain Cement Concrete (PCC) CUM Please mention grade.
2.1.4 Stubs Setting Loc.
2.1.5 Rebar MT
2.1.6 Form Works [Link]
2.1.7 Shoring and Shuttering [Link]
2.1.8 Rainforced Cement Concrete (RCC) CUM Please mention grade.
2.1.9 Backfilling and Compaction CUM
2.1.10 Stone Gabion Wall CUM
2.1.11 Stone Masonry Wall CUM
2.1.12 Concrete Drainage Ditch RM
Typerow
This of Pile including size
is intentionally leftand
2.2 Pile Foundation Loc
depth.
blank for bidder. The bidder
2.3 Any other items bidder would like to add.
may add more rows if required
for other items associated with
3 Erection of all type of Towers MT Tower Structure they
4 Erection of Tower accessories envisaged.
4.1 Phase Plate, Number Plate & Danger Plate Loc
4.2 Anti Climbing Device Loc
4.3 Aviation Lights with accessories Loc
4.4 Painting of the towers as per aviation clearance pirmit Loc
4.5 Tack Welding in bolts for anti theft purpose Loc
4.6 Any other items bidder would like to add

6 of
 Stringing of ACSR Quad Moose Conductor including crossing of power lines, rivers, all
types of roads, forests, etc. with controlled tension method using Tensioner & Puller, Pilot
Wires, etc including fixing of all accessories related to stringing work like disc insulators,
5 hardware fittings, vibration dampers, arcing rings or other corona protection items,
spacers, etc. complete in all respect. The work also includes necessary arrangement for
scaffolding, power and traffic blocks, etc. For details refer to Section - V - B1/Annex D,
Appendix 5.
Stringing of ACSR Quad Moose Conductor as indicated above (Quad Moose X 3 Phase X 2
5.1 KM
Circuit).
5.2 Fixing of Suspension Fitting Set
5.3 Fixing of Tension Fitting Set
5.4 Fixing of Pilot Insulator Fitting for jumpers (as required) Set
5.5 Hoisting of Suspension Disk Insulator String Set
5.6 Hoisting of Tension Insulator String (as required) Set
5.7 Hoisting of Pilot Insulator String Set
5.8 Fixing of Vibration Dampers No
5.9 Fixing of Spacers No
5.10 Fixing of of
Crossing Arcing
33kVRings / Other
and below Corona
voltage protection
lines items
including arrangement for scaffolding and Set
5.11 arrangement
Crossing for power/traffic
of 66kV block. lines including arrangement for scaffolding and
and above voltage Span
5.12 arrangement for power/traffic block. Span
5.13 Crossing of all type of roads including arrangement of traffic block Span
5.14 Crossing of River Span
5.15 Any other work related to stringing as considered by the bidder.

6 Stringing of OHGW using Tensioner & Puller, Pilot Wires, etc including crossing of power
6.1 lines, rivers,
Stringing all types of roads, forests, etc. and fixing of all accessories related to stringing
of OHGW KM
6.2 work
Fixinglike hardwareJoint
of Mid-Span fittings, vibration
for OHGW dampers,
7 No5 AW Aviation marker balls, complete in all No
respect. The work also includes necessary arrangement for scaffolding, power and traffic
6.3 Erection of Stockbridge Damper for OHGW 7 No 5 AW No
6.4 Erection of OHGW Suspension Assembly with accessories Set
6.5 Erection of
Crossing of OHGW
33kV and Tension
below Assembly with
voltage lines accessories
including arrangement for scaffolding and Set
6.6 arrangement for power/traffic
Crossing of 66kV block. lines including arrangement for scaffolding and
and above voltage Span
6.7 arrangement for power/traffic block. Span
6.8 Crossing of all type of roads including arrangement of traffic block Span
6.9 Any other work related to stringing as considered by the bidder.

Stringing of OPGW using Tensioner & Puller, Pilot Wires, etc including crossing of power
lines, rivers, all types of roads, forests, etc. and fixing of all accessories related to stringing
work like hardware fittings, vibration dampers, Aviation marker balls, Splicing etc.
7
complete in all respect. The work also includes necessary arrangement for scaffolding,
power and traffic blocks, etc.. For details refer to Section - V B1/Annex D, Appendix 3.

7.1 Stringing of OPGW (24F, 66 kA for 2 sec) KM

7.2 Erection of Stockbridge Damper for OPGW No
7.3 Erection of Splice Box for OPGW No
7.4 Down Lead Clamp for OPGW No
7.5 Erection of OPGW Suspension Assembly with accessories No
7.6 Erection of OPGW Tension Assembly with accessories No
7.7 Joint boxes OPGW-OPGW No
7.8 Joint termination boxes OPGW-U/G FOC No
7.9 Splicing Work No
Crossing of 33kV and below voltage lines including arrangement for scaffolding and
7.10 Span
arrangement for power/traffic
Crossing of 66kV block. lines including arrangement for scaffolding and
and above voltage
7.11 Span
arrangement for power/traffic block.
7.12 Crossing of all type of roads including arrangement of traffic block Span
7.13 Any other work related to stringing as considered by the bidder.

7 of
 8 Tower Earthing Works
8.1 Earthing with one rod per foundation No
8.2 Earthing with two rods per foundation No
8.3 Earting with three rods per foundation No
8.4 Earthing with four or more rods per foundation No
8.5 Continuous coutnerpoise across one line span No
8.6 Earthing of the 5 Towers closest to Substation No
8.7 Any other work related to stringing as considered by the bidder.

9 Environmental, Health & Safety, Social and Gender Requirements.

9.1 General Mitigation Measures
Develop a detailed Environmental, Social, Health, and Safety (ESHS) Management Plan for
9.1.1 Lot
Contractor's employees.
Develop, provide training and enforce a Worker Code of Conduct that includes an anti-sexual
9.1.2 Lot
harassment policy
9.1.3 Conduct Employee Induction Training on H&S and environmental/social/cultural sensitivity Lot
9.1.4 Implement Community Grievance Redress Plan Lot
9.1.5 Outreach activities on environment, social, health and safety in project areas N.A.

9.1.6 Capacity building and training for communities such as skill trainings Lot

9.2 Physical Environment Mitigation Measures

9.2.1 Implement an Erosion and Sediment Control Plan Lot
9.2.2 Manage excavated soils Lot
9.2.3 Stabilize disturbed areas with native flora Lot
9.2.4 Spray disturbed areas with water if substantive off-site fugitive dust impacts occur Lot
9.2.5 Provide a pit toilet and bury all organic wastes at tower construction sites Lot
9.2.6 Install septic systems/package and proper wastewater disposal system for workers Lot
9.2.7 Provide hazardous material training to concerned staff Lot
9.2.8 Stockpile materials for use in controlling spills at each Tower Laydown Area Lot

9.2.9 Provide secondary containment for any fuel or hazardous materials Lot

9.2.10 Collect and segregate all waste for reuse, recycle, or disposal Lot
9.2.11 Dispose of solid waste at approved waste disposal facilities Lot
9.3 Biological Environmental Mitigation Measures
9.3.1 Conduct pre-clearance surveys for tree clearance Lot
9.3.2 Implement wildlife shepherding protocol Lot
9.3.3 Implement invasive alien species management plan Lot
9.3.4 Implement forest fire management strategy Lot
Implement community programme to prohibit poaching and illegal collection of NTFPs and
9.3.5 Lot
MAPs
9.4 Socio-economic and Cultural Environment Mitigation Measures
9.4.1 Implement Workforce Management Plan Lot
9.4.2 Implement Worker Access Management Protocol Lot
9.4.3 Implement Traffic Management Plan and maintain the damaged roads caused by contractors Lot
9.4.4 Implement Cultural Heritage Management Plan Lot
9.4.5 Develop and Implement Worker Grievance Redress Mechanism Lot
9.4.6 Conduct community training on EMF risks Lot
9.4.7 Develop and Implement TIP Risk Management Plan Lot
Community sensitization/awareness on HIV/AIDS, STDs, trafficking, sexual harassment,
9.4.8 Lot
employment opportunities
Any other work considered by the Bidder related to ESHSMP work which is not included in the
9.5
above list.

8 of
10 FAT Witness. (Per B0 Annex 3)

In country & outside country Factory Inspection (FAT) & Prototype test witness. Contractor to
10.1 Mandays
arrange only the transport facility for Employer, Asset Owner & Engineer.
10.2 Any other training considered by the Bidder relevant which is not included in the above list.

Testing, Commissioning and Energizing (The Work includes but not limited to - Line
patrolling for final checking against any defects, Checking the line with High Frequency
11 LS
Signal (Signature Analysis) to check any loose jumpering / defective disk insulator string if
required, Checking of OPGW System, Energisation of Line)
11.1 Any other item considered by the Bidder relevant which is not included in the above list.

Name of Bidder :

Signature of Bidder :

9 of
Procurement of Plant Design, Supply, Delivery, Installation, Testing and Commissioning of New Butwal -Nepal/India Border 400kV D/C Transmission Line (18 KM)

Breakdown of Rates and Prices Schedule No. 5. Optional Works

Unit Price Total Price
Qty. Currency Currency Additional Information to be provided
Item Description Unit
(US$) (US$) by bidder.
1 2 (1) x (2)

Site Office for Engineer including all necessary facilities (such as furnitures,
1.1
computer and communication equipment etc. and O&M cost of Site Office)

1.1.1 Fully Furnished Site Office for Engineer No. 1

1.1.2 Cost for Computer and other IT Equipments as stated in Employer's Requirement Set 1
1.1.3 O&M cost of Engineer Site office Monthly 1
Arrangement of living accommodation, guest house and its O&M cost for
1.2 Engineer's employees including all necessary amenities (at Contractor's
cost).
Fully Furnished Living accommodation for Engineer (as per Employers
1.2.1 No. 1
requirement)

1.2.2 Fully Furnished Guest house for Engineer (as per Employers requirement) No. 1

1.3 Transport facilities for Engineer

Engineers transport facilities with drivers (including fuel, running and

1.3.1 Monthly 1
maintenance costs, statutory charges for cars etc.) - 4 Wheel Drive Pick up 1 No

Engineers transport facilities with drivers (including fuel, running and

1.3.2 Monthly 1
maintenance costs, statutory charges for cars etc.) 4 Wheel Drive SUV - 1 No

Tree Clearance Work during Survey & Geo-tech investigation, Foundation, Erection
1.4 & Stringing Work (The Work includes but not limited to - Bush Cleaning, Tree
cutting / Trimming of branches of trees, etc.)
1.4.1 Tree Cutting, stagging and trasport to designated area as per the employers requirement No. 1
1.4.2 All other works associated with tree clearance as per employers requirement. LS 1

1.5 Demolition of Building in ROW 46 Meter

1.5.1 Building to Demolish No. 1
1.5.2 Disposal of dmolished materials as per the provisions in ESHSMP LS 1

2 Spare parts

D1A Type Tower of highest extensions as per tower schedule (0 to 2 Degree)- Tower 1. Weight of Base Body in MT.
2.1 Set 1
Category: Suspension 2. Weight of extension portion in MT.

D1B Type Tower of highest extensions as per tower schedule- (0 to 15 Degree)- Tower 1. Weight of Base Body in MT.
2.2 Set 1
Category: Strain 2. Weight of extension portion in MT.

D1C Type Tower of highest extensions as per tower schedule (15 to 30 Degree) Tower 1. Weight of Base Body in MT.
2.3 Set 1
Category : Strain 2. Weight of extension portion in MT.

D1D Type Tower of highest extensions as per tower schedule (0 to 30 Degree)- Tower 1. Weight of Base Body in MT.
2.4 Set 1
Category : Full Dead End 2. Weight of extension portion in MT.

D1E Type Tower of highest extensions as per tower schedule (30 to 90 Degree) - Tower 1. Weight of Base Body in MT.
2.5 Set 1
Category : Full Dead End 2. Weight of extension portion in MT.

As contractor has the flexibility to design their own tower classification, for S. No 1.1
Rem.
to 1.5 bidder may propose spare of their tower classification.

2.6 Conductor ACSR "MOOSE" KM 1

2.6.1 Compression joint for Conductor ACSR "Moose" Set 1
2.6.2 Repair sleeve for Conductor ACSR "Moose" Set 1
2.6.3 Spacer damper for conductor ACSR "Moose" Set 1
2.6.4 Rigid Spacer for conductor jumpers (for ACSR "Moose") Set 1

2.7 OPGW KM 1
2.7.1 OPGW joint box Set 1
2.7.2 Vibration damper for OPGW Set 1
2.7.3 Suspension assembly for OPGW Set 1
2.7.4 Tension assembly for OPGW Set 1
2.7.5 OPGW download clamps Set 1
2.7.6 Earth wire of aluminium-clad steel wire 93 mm2 KM 1
2.7.7 Compression joint for earth wire Set 1
2.7.8 Suspension assembly for earth wire Set 1
2.7.9 Tension assembly for earth wire Set 1
2.7.10 Vibration damper for earth wire ACS 93 Set 1
Insulator sets (included: Disc insulator units / toughened glass insulator units, Assembly
2.8 Set 1
fittings, Phase conductor fittings)
2.8.1 Suspension set (for normal span & crossing span) Set 1
2.8.2 Tension set (for normal span & crossing span) Set 1
Danger Plate / Phase Plate / No plate / Anticlimbing Device / Bird Anti-Nest Spikes/ bird
2.8.3 Set 1
reflectors, bird nesting platforms
2.8.4 Stockbridge Conductor Dampers Set 1
2.9 Any other item associated with Mandatory Spare Parts considered by the Bidder.

3 Tool
Toolsbox Mechanical (open spanners 16mm - 38mm; ring spanners 16mm - 38mm;
Combination pliers; screw driver sets ,steel punch, flat &round file 250mm ,hammer
3.1 Tool Kit ACSR "MOOSE" and OHGW 7 No5 AW. Shall include conductor strand Set 1
1.5kg,sledge hammer 5kg, knife steel brush measuring tapes 30m & 50m. Bow saw cutter,
and
3.2 hydraulic
saw press,
blades, press
spirit forms
level, plug for
box ACSR "MOOSE"
spanner size (steel
64mm, core
pipe and aluminium
wrench, veneer outer
calipers) Set 1
Wire rope – steel wire Ø16mm, 230 KN, Length:
strands) and for OHGW 7 No5 AW, generator power source150m, Tapered end, Hooked end, with
3.3 No 1
reel
3.4 Conductor trimmer with one popular bushing & more bushings for ASCR "MOOSE" No 1
3.5 Swivel Grips for conductors ACSR "MOOSE" No 1
3.6 Two bundled conductors’ pulley (model, as agreed with NEA) No 1
3.7 The head-type temporary mesh sock joints for conductor ACSR "MOOSE" No 1
3.8 Double head-type temporary mesh sock joints for conductor ACSR "MOOSE" No 1
3.9 Self-gripping (Come along) clamps for conductor ACSR "MOOSE" No 1

3.10 Self-gripping (Come along) clamps for OHGW 7 No5 AW No 1

3.10.1 Inspection Trolley (model, as agreed with client) No 1

3.10.2 Service Snatch Blocks (model, as agreed with client) No 1
3.10.3 Lifting Hoists (model/capacity, as agreed with client) No 1
3.10.4 Tirfor with rope (model/breaking load, as agreed with client) No 1
3.10.5 Suspension Ladders (aluminium alloy, 6 m) No 1
3.10.6 Anchoring Ladders (aluminium alloy, 8 m) No 1
Splice Kit OPGW. Shall include fiber optic cutter, fiber jointing device, FC/PC
3.10.7 Set 1
connectors,
Tool pigtails,
Kit OPGW. cleaning
Shall includeand cleaver
fusion toolsoptical level meter, optical time domain
splicer,
3.10.8 Set 1
reflector (OTDR), laser power source
3.11 Any other item associated with Mandatory Tools considered by the Bidder.

4 OPGW System OPGW 48 Core is an optional item. If

India side of the Cross Border line
adopts 48 Core OPGW, then the
same standard will be utilized for
4.1 OPGW (48F, 66 kA2*sec) KM 18KM Cross border line in Nepal
4.2 Stockbridge Damper for OPGW (48F) No Side also. In such case, all the items
4.3 Splice Box for OPGW (48F) No mentioned against Schedule 2-Item
4.4 Down Lead Clamp for OPGW (48F) No no 5 will be substituted by Item no. 5
under Schedule 5 and accordiingly
4.5 OPGW Suspension Assembly with accessories Set
the price will adjusted. The offeror
4.6 OPGW Tension Assembly with accessories Set should mention rates as well as
4.7 Joint boxes OPGW-OPGW No appropriate quantity for the
4.8 Joint termination boxes OPGW-U/G FOC No successful completion of the project.
 Procurement of Plant Design, Supply, Delivery, Installation, Testing and Commissioning of New Butwal -Nepal/India Border 400kV D/C
Transmission Line (18 KM)
Breakdown of Rates and Prices Schedule No. 6. Grand Summary

Item Description Total Price

Currency (US$)
1 Total Schedule No. 1. Design Services

2 Total Schedule No. 2. Plant, Goods, Materials and Mandatory Tools and Spare Parts Supplied from Abroad

Total Schedule No. 3. Plant, Goods, Materials and Mandatory Tools and Mandatory Spare Parts Supplied
3
from Within the Employer’s Country
4 Total Schedule No. 4. Installation and Other Services Included all Related Civil Works
5 TOTAL
6 VAT (if applicable) (@13%)
7 Total including VAT (5+6)
8 Total Schedule No. 5 Optional Works
9 VAT (if applicable) (@13%) for Optional Item
10 Total of Optional Items including VAT (8+9)
11 Grand Total including Optional Works (Exlcluding VAT) (To be Taken to Letter of Offer)
12 Grand Total including Optional Works (Exlcluding including VAT)
Name of Bidder :
Signature of Bidder :
Note
The quoted Unit Price shall include all the cost required to perform task successfully such as loading, transportation, insurance, unloading and
1
storing at proper storage place and carrying out works as per Employer’s requirement and Conditions of Contract.
Grand Total including Optional Works (Exlcluding VAT) (To be Taken to Letter of Offer) shall be used for evaluation and comparision
2 purpose
pal/India Border 400kV D/C

Total Price
Currency (US$)

ation, insurance, unloading and

act.
valuation and comparision