SAFETY DATA SHEET

According to the Hazardous Products Regulations

GL-5 80W-90 Gear Lube

Version Revision Date: SDS Number: Print Date: 2019-01-29

1.1 2019-01-28 800010034328 Date of last issue: 08.01.2019
Date of first issue: 08.01.2019

SECTION 1. IDENTIFICATION

Product name : GL-5 80W-90 Gear Lube

Product code : 001H3321

Manufacturer or supplier's details

Manufacturer/Supplier : Shell Canada Products

400 - 4th Avenue S.W
Calgary AB T2P 0J4
Canada

Telephone : (+1) 8006611600

Telefax : (+1) 4033848345

Emergency telephone num- : CHEMTREC (24 hr): 1 (703) 527-3887 or 1 (800) 424-9300
ber (US)
CANUTEC (24 hr): (+1) 613-996-6666; Toll Free: 1-888-CAN-
UTEC (226-8832)

Recommended use of the chemical and restrictions on use

Recommended use : Transmission oil.

SECTION 2. HAZARDS IDENTIFICATION

GHS Classification
Based on available data this substance / mixture does not meet the classification criteria.
GHS label elements

Hazard pictograms : No Hazard Symbol required

Signal word : No signal word

Hazard statements : PHYSICAL HAZARDS:

Not classified as a physical hazard under GHS criteria.
HEALTH HAZARDS:
Not classified as a health hazard under GHS criteria.
ENVIRONMENTAL HAZARDS:
Not classified as an environmental hazard under GHS criteria.

Precautionary statements : Prevention:

No precautionary phrases.
Response:
No precautionary phrases.
Storage:
1 / 15 800010034328
CA
SAFETY DATA SHEET
According to the Hazardous Products Regulations
GL-5 80W-90 Gear Lube

Version Revision Date: SDS Number: Print Date: 2019-01-29

1.1 2019-01-28 800010034328 Date of last issue: 08.01.2019
Date of first issue: 08.01.2019

No precautionary phrases.
Disposal:
No precautionary phrases.

Other hazards which do not result in classification

Prolonged or repeated skin contact without proper cleaning can clog the pores of the skin result-
ing in disorders such as oil acne/folliculitis.
Used oil may contain harmful impurities.
Not classified as flammable but will burn.

SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Substance name : GL-5 80W-90 Gear Lube

Chemical nature : Highly refined mineral oils and additives.

The highly refined mineral oil contains <3% (w/w) DMSO-
extract, according to IP346.

* contains one or more of the following CAS-numbers: 64742-

53-6, 64742-54-7, 64742-55-8, 64742-56-9, 64742-65-0,
68037-01-4, 72623-86-0, 72623-87-1, 8042-47-5, 848301-69-
9.

Hazardous components
Chemical name CAS-No. Concentration (% w/w)
Interchangeable low viscosity base oil (<20,5 cSt Not Assigned 0 - 90
@40°C) *
Dialkylpolysulphide 68937-96-2 1 - 2.49
Amine phosphate Not Assigned 1 - 2.49
Alkenyl imidazoline 27136-73-8 0.1 - 0.99

SECTION 4. FIRST-AID MEASURES

If inhaled : No treatment necessary under normal conditions of use.

If symptoms persist, obtain medical advice.

In case of skin contact : Remove contaminated clothing. Flush exposed area with wa-
ter and follow by washing with soap if available.
If persistent irritation occurs, obtain medical attention.

In case of eye contact : Flush eye with copious quantities of water.

Remove contact lenses, if present and easy to do. Continue
rinsing.
If persistent irritation occurs, obtain medical attention.

If swallowed : In general no treatment is necessary unless large quantities

are swallowed, however, get medical advice.

Most important symptoms : Oil acne/folliculitis signs and symptoms may include formation
and effects, both acute and of black pustules and spots on the skin of exposed areas.

2 / 15 800010034328
CA
SAFETY DATA SHEET
According to the Hazardous Products Regulations
GL-5 80W-90 Gear Lube

Version Revision Date: SDS Number: Print Date: 2019-01-29

1.1 2019-01-28 800010034328 Date of last issue: 08.01.2019
Date of first issue: 08.01.2019

delayed Ingestion may result in nausea, vomiting and/or diarrhoea.

Protection of first-aiders : When administering first aid, ensure that you are wearing the
appropriate personal protective equipment according to the
incident, injury and surroundings.

Notes to physician : Treat symptomatically.

SECTION 5. FIRE-FIGHTING MEASURES

Suitable extinguishing media : Foam, water spray or fog. Dry chemical powder, carbon diox-
ide, sand or earth may be used for small fires only.

Unsuitable extinguishing : Do not use water in a jet.

media

Specific hazards during fire- : Hazardous combustion products may include:

fighting A complex mixture of airborne solid and liquid particulates and
gases (smoke).
Carbon monoxide may be evolved if incomplete combustion
occurs.
Unidentified organic and inorganic compounds.

Specific extinguishing meth- : Use extinguishing measures that are appropriate to local cir-
ods cumstances and the surrounding environment.

Special protective equipment : Proper protective equipment including chemical resistant

for firefighters gloves are to be worn; chemical resistant suit is indicated if
large contact with spilled product is expected. Self-Contained
Breathing Apparatus must be worn when approaching a fire in
a confined space. Select fire fighter's clothing approved to
relevant Standards (e.g. Europe: EN469).

SECTION 6. ACCIDENTAL RELEASE MEASURES

Personal precautions, protec- : Avoid contact with skin and eyes.

tive equipment and emer-
gency procedures

Environmental precautions : Use appropriate containment to avoid environmental contami-

nation. Prevent from spreading or entering drains, ditches or
rivers by using sand, earth, or other appropriate barriers.

Local authorities should be advised if significant spillages

cannot be contained.

Methods and materials for : Slippery when spilt. Avoid accidents, clean up immediately.
containment and cleaning up Prevent from spreading by making a barrier with sand, earth
or other containment material.
Reclaim liquid directly or in an absorbent.
Soak up residue with an absorbent such as clay, sand or other
3 / 15 800010034328
CA
SAFETY DATA SHEET
According to the Hazardous Products Regulations
GL-5 80W-90 Gear Lube

Version Revision Date: SDS Number: Print Date: 2019-01-29

1.1 2019-01-28 800010034328 Date of last issue: 08.01.2019
Date of first issue: 08.01.2019

suitable material and dispose of properly.

Additional advice : For guidance on selection of personal protective equipment

see Chapter 8 of this Safety Data Sheet.
For guidance on disposal of spilled material see Chapter 13 of
this Safety Data Sheet.

SECTION 7. HANDLING AND STORAGE

General Precautions : Use local exhaust ventilation if there is risk of inhalation of

vapours, mists or aerosols.
Use the information in this data sheet as input to a risk as-
sessment of local circumstances to help determine appropri-
ate controls for safe handling, storage and disposal of this
material.

Advice on safe handling : Avoid prolonged or repeated contact with skin.

Avoid inhaling vapour and/or mists.
When handling product in drums, safety footwear should be
worn and proper handling equipment should be used.
Properly dispose of any contaminated rags or cleaning mate-
rials in order to prevent fires.

Avoidance of contact : Strong oxidising agents.

Product Transfer : Proper grounding and bonding procedures should be used

during all bulk transfer operations to avoid static accumulation.

Storage
Other data : Keep container tightly closed and in a cool, well-ventilated
place.
Use properly labeled and closable containers.

Store at ambient temperature.

Packaging material : Suitable material: For containers or container linings, use mild
steel or high density polyethylene.
Unsuitable material: PVC.

Container Advice : Polyethylene containers should not be exposed to high tem-

peratures because of possible risk of distortion.

SECTION 8. EXPOSURE CONTROLS AND PERSONAL PROTECTION

Components with workplace control parameters

Components CAS-No. Value type Control parame- Basis
4 / 15 800010034328
CA
SAFETY DATA SHEET
According to the Hazardous Products Regulations
GL-5 80W-90 Gear Lube

Version Revision Date: SDS Number: Print Date: 2019-01-29

1.1 2019-01-28 800010034328 Date of last issue: 08.01.2019
Date of first issue: 08.01.2019

(Form of ters / Permissible

exposure) concentration
Oil mist, mineral Not Assigned TWA (Mist) 5 mg/m3 OSHA Z-1
TWA (Inhal- 5 mg/m3 ACGIH
able fraction)
Biological occupational exposure limits
No biological limit allocated.

Monitoring Methods
Monitoring of the concentration of substances in the breathing zone of workers or in the general
workplace may be required to confirm compliance with an OEL and adequacy of exposure con-
trols. For some substances biological monitoring may also be appropriate.
Validated exposure measurement methods should be applied by a competent person and sam-
ples analysed by an accredited laboratory.
Examples of sources of recommended exposure measurement methods are given below or con-
tact the supplier. Further national methods may be available.
National Institute of Occupational Safety and Health (NIOSH), USA: Manual of Analytical Meth-
ods http://www.cdc.gov/niosh/
Occupational Safety and Health Administration (OSHA), USA: Sampling and Analytical Methods
http://www.osha.gov/
Health and Safety Executive (HSE), UK: Methods for the Determination of Hazardous Substanc-
es http://www.hse.gov.uk/
Institut für Arbeitsschutz Deutschen Gesetzlichen Unfallversicherung (IFA) , Germany
http://www.dguv.de/inhalt/index.jsp
L'Institut National de Recherche et de Securité, (INRS), France http://www.inrs.fr/accueil
Engineering measures : The level of protection and types of controls necessary will
vary depending upon potential exposure conditions. Select
controls based on a risk assessment of local circumstances.
Appropriate measures include:
Adequate ventilation to control airborne concentrations.

Where material is heated, sprayed or mist formed, there is

greater potential for airborne concentrations to be generated.

General Information:
Define procedures for safe handling and maintenance of
controls.
Educate and train workers in the hazards and control
measures relevant to normal activities associated with this
product.
Ensure appropriate selection, testing and maintenance of
equipment used to control exposure, e.g. personal protective
equipment, local exhaust ventilation.
Drain down system prior to equipment break-in or mainte-
nance.
Retain drain downs in sealed storage pending disposal or
subsequent recycle.
Always observe good personal hygiene measures, such as
washing hands after handling the material and before eating,
5 / 15 800010034328
CA
SAFETY DATA SHEET
According to the Hazardous Products Regulations
GL-5 80W-90 Gear Lube

Version Revision Date: SDS Number: Print Date: 2019-01-29

1.1 2019-01-28 800010034328 Date of last issue: 08.01.2019
Date of first issue: 08.01.2019

drinking, and/or smoking. Routinely wash work clothing and

protective equipment to remove contaminants. Discard con-
taminated clothing and footwear that cannot be cleaned.
Practice good housekeeping.

Personal protective equipment

Respiratory protection : No respiratory protection is ordinarily required under normal
conditions of use.
In accordance with good industrial hygiene practices, precau-
tions should be taken to avoid breathing of material.
If engineering controls do not maintain airborne concentra-
tions to a level which is adequate to protect worker health,
select respiratory protection equipment suitable for the spe-
cific conditions of use and meeting relevant legislation.
Check with respiratory protective equipment suppliers.
Where air-filtering respirators are suitable, select an appro-
priate combination of mask and filter.
Select a filter suitable for the combination of organic gases
and vapours [Type A/Type P boiling point >65°C (149°F)].

Hand protection
Remarks : Where hand contact with the product may occur the use of
gloves approved to relevant standards (e.g. Europe: EN374,
US: F739) made from the following materials may provide
suitable chemical protection. PVC, neoprene or nitrile rubber
gloves Suitability and durability of a glove is dependent on
usage, e.g. frequency and duration of contact, chemical re-
sistance of glove material, dexterity. Always seek advice from
glove suppliers. Contaminated gloves should be replaced.
Personal hygiene is a key element of effective hand care.
Gloves must only be worn on clean hands. After using
gloves, hands should be washed and dried thoroughly. Appli-
cation of a non-perfumed moisturizer is recommended.
For continuous contact we recommend gloves with break-
through time of more than 240 minutes with preference for >
480 minutes where suitable gloves can be identified. For
short-term/splash protection we recommend the same, but
recognize that suitable gloves offering this level of protection
may not be available and in this case a lower breakthrough
time maybe acceptable so long as appropriate maintenance
and replacement regimes are followed. Glove thickness is not
a good predictor of glove resistance to a chemical as it is
dependent on the exact composition of the glove material.
Glove thickness should be typically greater than 0.35 mm
depending on the glove make and model.

Eye protection : If material is handled such that it could be splashed into eyes,
protective eyewear is recommended.

Skin and body protection : Skin protection is not ordinarily required beyond standard
work clothes.
It is good practice to wear chemical resistant gloves.
6 / 15 800010034328
CA
SAFETY DATA SHEET
According to the Hazardous Products Regulations
GL-5 80W-90 Gear Lube

Version Revision Date: SDS Number: Print Date: 2019-01-29

1.1 2019-01-28 800010034328 Date of last issue: 08.01.2019
Date of first issue: 08.01.2019

Thermal hazards : Not applicable

Protective measures : Personal protective equipment (PPE) should meet recom-

mended national standards. Check with PPE suppliers.

Environmental exposure controls

General advice : Take appropriate measures to fulfill the requirements of rele-
vant environmental protection legislation. Avoid contamination
of the environment by following advice given in Chapter 6. If
necessary, prevent undissolved material from being dis-
charged to waste water. Waste water should be treated in a
municipal or industrial waste water treatment plant before
discharge to surface water.
Local guidelines on emission limits for volatile substances
must be observed for the discharge of exhaust air containing
vapour.

SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance : Clear, bright liquid.

Colour : clear

Odour : Slight hydrocarbon

Odour Threshold : Data not available

pH : Not applicable

pour point : <= -21 °C / <= -6 °F

Method: ASTM D5950

<= -21 °C / <= -6 °F

Method: ASTM D97

Initial boiling point and boiling : > 280 °C / 536 °F

range estimated value(s)

Flash point : 218 °C / 424 °F

Method: ASTM D92 (COC)

Evaporation rate : Data not available

Flammability (solid, gas) : Data not available

Upper explosion limit : Typical 10 %(V)

7 / 15 800010034328
CA
SAFETY DATA SHEET
According to the Hazardous Products Regulations
GL-5 80W-90 Gear Lube

Version Revision Date: SDS Number: Print Date: 2019-01-29

1.1 2019-01-28 800010034328 Date of last issue: 08.01.2019
Date of first issue: 08.01.2019

Lower explosion limit : Typical 1 %(V)

Vapour pressure : < 0.5 Pa (20 °C / 68 °F)

estimated value(s)

Relative vapour density : >1

estimated value(s)

Relative density : 0.8872 (15.0 °C / 59.0 °F)

Density : 887.2 kg/m3 (15.0 °C / 59.0 °F)Method: ASTM D1298

Solubility(ies)
Water solubility : negligible

Solubility in other solvents : Data not available

Partition coefficient: n- : log Pow: > 6

octanol/water (based on information on similar products)

Auto-ignition temperature : > 320 °C / 608 °F

Decomposition temperature : Data not available

Viscosity
Viscosity, dynamic : Data not available

Viscosity, kinematic : 13.5 - 15.5 mm2/s (100 °C / 212 °F)

Method: ASTM D445

139 mm2/s (40.0 °C / 104.0 °F)

Method: ASTM D445

Explosive properties : Not classified

Oxidizing properties : Data not available

Conductivity : This material is not expected to be a static accumulator.

SECTION 10. STABILITY AND REACTIVITY

Reactivity : The product does not pose any further reactivity hazards in
addition to those listed in the following sub-paragraph.

Chemical stability : Stable.

Possibility of hazardous reac- : Reacts with strong oxidising agents.

tions

Conditions to avoid : Extremes of temperature and direct sunlight.

8 / 15 800010034328
CA
SAFETY DATA SHEET
According to the Hazardous Products Regulations
GL-5 80W-90 Gear Lube

Version Revision Date: SDS Number: Print Date: 2019-01-29

1.1 2019-01-28 800010034328 Date of last issue: 08.01.2019
Date of first issue: 08.01.2019

Incompatible materials : Strong oxidising agents.

Hazardous decomposition : No decomposition if stored and applied as directed.

products

SECTION 11. TOXICOLOGICAL INFORMATION

Basis for assessment : Information given is based on data on the components and
the toxicology of similar products.Unless indicated otherwise,
the data presented is representative of the product as a
whole, rather than for individual component(s).

Information on likely routes of exposure

Skin and eye contact are the primary routes of exposure although exposure may occur following
accidental ingestion.
Acute toxicity

Product:
Acute oral toxicity : LD50 (rat): > 5,000 mg/kg
Remarks: Low toxicity:
Based on available data, the classification criteria are not met.

Acute inhalation toxicity : Remarks: Based on available data, the classification criteria
are not met.

Acute dermal toxicity : LD50 (Rabbit): > 5,000 mg/kg

Remarks: Low toxicity:
Based on available data, the classification criteria are not met.

Skin corrosion/irritation

Product:
Remarks: Slightly irritating to skin.
Prolonged or repeated skin contact without proper cleaning can clog the pores of the skin result-
ing in disorders such as oil acne/folliculitis.
Based on available data, the classification criteria are not met.

Serious eye damage/eye irritation

Product:
Remarks: Slightly irritating to the eye.
Based on available data, the classification criteria are not met.

Components:
Amine phosphate:
Remarks: Based on available data, the classification criteria are not met.

Respiratory or skin sensitisation

Product:
9 / 15 800010034328
CA
SAFETY DATA SHEET
According to the Hazardous Products Regulations
GL-5 80W-90 Gear Lube

Version Revision Date: SDS Number: Print Date: 2019-01-29

1.1 2019-01-28 800010034328 Date of last issue: 08.01.2019
Date of first issue: 08.01.2019

Remarks: Not a skin sensitiser.

Based on available data, the classification criteria are not met.

Components:
Dialkylpolysulphide:
Remarks: Experimental data has shown that the concentration of potentially sensitising compo-
nents present in this product does not induce skin sensitisation.
May cause an allergic skin reaction in sensitive individuals.

Amine phosphate:
Remarks: Experimental data has shown that the concentration of potentially sensitising compo-
nents present in this product does not induce skin sensitisation.
May cause an allergic skin reaction in sensitive individuals.

Germ cell mutagenicity

Product:
Genotoxicity in vivo : Remarks: Non mutagenic
Based on available data, the classification criteria are not met.

Carcinogenicity

Product:
Remarks: Not a carcinogen.
Based on available data, the classification criteria are not met.

Remarks: Product contains mineral oils of types shown to be non-carcinogenic in animal skin-
painting studies.
Highly refined mineral oils are not classified as carcinogenic by the International Agency for Re-
search on Cancer (IARC).

IARC No component of this product present at levels greater than or

equal to 0.1% is identified as probable, possible or confirmed
human carcinogen by IARC.

OSHA No component of this product present at levels greater than or

equal to 0.1% is on OSHA’s list of regulated carcinogens.

NTP No component of this product present at levels greater than or

equal to 0.1% is identified as a known or anticipated carcinogen
by NTP.

Reproductive toxicity

Product:
Effects on fertility :
Remarks: Not a developmental toxicant.
Does not impair fertility.
Based on available data, the classification criteria are not met.

10 / 15 800010034328
CA
SAFETY DATA SHEET
According to the Hazardous Products Regulations
GL-5 80W-90 Gear Lube

Version Revision Date: SDS Number: Print Date: 2019-01-29

1.1 2019-01-28 800010034328 Date of last issue: 08.01.2019
Date of first issue: 08.01.2019

STOT - single exposure

Product:
Remarks: Based on available data, the classification criteria are not met.

STOT - repeated exposure

Product:
Remarks: Based on available data, the classification criteria are not met.

Aspiration toxicity

Product:
Not an aspiration hazard.

Further information

Product:
Remarks: Used oils may contain harmful impurities that have accumulated during use. The con-
centration of such impurities will depend on use and they may present risks to health and the
environment on disposal.
ALL used oil should be handled with caution and skin contact avoided as far as possible.

Remarks: Slightly irritating to respiratory system.

SECTION 12. ECOLOGICAL INFORMATION

Basis for assessment : Ecotoxicological data have not been determined specifically
for this product.
Information given is based on a knowledge of the components
and the ecotoxicology of similar products.
Unless indicated otherwise, the data presented is representa-
tive of the product as a whole, rather than for individual com-
ponent(s).(LL/EL/IL50 expressed as the nominal amount of
product required to prepare aqueous test extract).

Ecotoxicity

Product:
Toxicity to fish (Acute toxici- :
ty) Remarks: LL/EL/IL50 > 100 mg/l
Practically non toxic:
Based on available data, the classification criteria are not met.

Toxicity to crustacean (Acute :

toxicity) Remarks: LL/EL/IL50 > 100 mg/l
Practically non toxic:
Based on available data, the classification criteria are not met.

Toxicity to algae/aquatic :
11 / 15 800010034328
CA
SAFETY DATA SHEET
According to the Hazardous Products Regulations
GL-5 80W-90 Gear Lube

Version Revision Date: SDS Number: Print Date: 2019-01-29

1.1 2019-01-28 800010034328 Date of last issue: 08.01.2019
Date of first issue: 08.01.2019

plants (Acute toxicity) Remarks: LL/EL/IL50 > 100 mg/l

Practically non toxic:
Based on available data, the classification criteria are not met.

Toxicity to fish (Chronic tox- : Remarks: Data not available

icity)

Toxicity to crustacean : Remarks: Data not available

(Chronic toxicity)
Toxicity to microorganisms : Remarks: Data not available
(Acute toxicity)
Components:
Alkenyl imidazoline:
M-Factor (Acute aquatic tox- : 1
icity)

Persistence and degradability

Product:
Biodegradability : Remarks: Not readily biodegradable.
Major constituents are inherently biodegradable, but contains
components that may persist in the environment.

Bioaccumulative potential

Product:
Bioaccumulation : Remarks: Contains components with the potential to bioac-
cumulate.

Partition coefficient: n- : log Pow: > 6

octanol/water Remarks: (based on information on similar products)

Mobility in soil

Product:
Mobility : Remarks: Liquid under most environmental conditions.
If it enters soil, it will adsorb to soil particles and will not be
mobile.

Remarks: Floats on water.

Other adverse effects

Product:
Additional ecological infor- : Does not have ozone depletion potential, photochemical
mation ozone creation potential or global warming potential.
Product is a mixture of non-volatile components, which will not
be released to air in any significant quantities under normal
conditions of use.

12 / 15 800010034328
CA
SAFETY DATA SHEET
According to the Hazardous Products Regulations
GL-5 80W-90 Gear Lube

Version Revision Date: SDS Number: Print Date: 2019-01-29

1.1 2019-01-28 800010034328 Date of last issue: 08.01.2019
Date of first issue: 08.01.2019

Poorly soluble mixture.

Causes physical fouling of aquatic organisms.

Mineral oil does not cause chronic toxicity to aquatic organ-

isms at concentrations less than 1 mg/l.

SECTION 13. DISPOSAL CONSIDERATIONS

Disposal methods
Waste from residues : Recover or recycle if possible.
It is the responsibility of the waste generator to determine the
toxicity and physical properties of the material generated to
determine the proper waste classification and disposal meth-
ods in compliance with applicable regulations.
Do not dispose into the environment, in drains or in water
courses

Waste product should not be allowed to contaminate soil or

ground water, or be disposed of into the environment.
Waste, spills or used product is dangerous waste.

Contaminated packaging : Dispose in accordance with prevailing regulations, preferably

to a recognized collector or contractor. The competence of
the collector or contractor should be established beforehand.
Disposal should be in accordance with applicable regional,
national, and local laws and regulations.

Local legislation
Remarks : Disposal should be in accordance with applicable regional,
national, and local laws and regulations.

SECTION 14. TRANSPORT INFORMATION

National Regulations
TDG
Not regulated as a dangerous good
International Regulations

IATA-DGR
Not regulated as a dangerous good
IMDG-Code
Not regulated as a dangerous good
Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
Not applicable for product as supplied. MARPOL Annex 1 rules apply for bulk shipments by sea.

Special precautions for user

13 / 15 800010034328
CA
SAFETY DATA SHEET
According to the Hazardous Products Regulations
GL-5 80W-90 Gear Lube

Version Revision Date: SDS Number: Print Date: 2019-01-29

1.1 2019-01-28 800010034328 Date of last issue: 08.01.2019
Date of first issue: 08.01.2019

Remarks : Special Precautions: Refer to Chapter 7, Handling & Storage,

for special precautions which a user needs to be aware of or
needs to comply with in connection with transport.

SECTION 15. REGULATORY INFORMATION

Safety, health and environmental regulations/legislation specific for the substance or mix-
ture
The regulatory information is not intended to be comprehensive. Other regulations may apply to
this material.
This product has been classified in accordance with the hazard criteria of the Hazardous Prod-
ucts Regulations (HPR) and the SDS contains all the information required by the HPR.
The components of this product are reported in the following inventories:
EINECS : All components listed or polymer exempt.

TSCA : All components listed.

DSL : All components listed.

SECTION 16. OTHER INFORMATION

Full text of other abbreviations

AIIC -Australian Inventory of Industrial Chemicals; ANTT - National Agency for Transport by Land
of Brazil; ASTM - American Society for the Testing of Materials; bw - Body weight; CMR - Carcin-
ogen, Mutagen or Reproductive Toxicant; CPR - Controlled Products Regulations; DIN - Standard
of the German Institute for Standardisation; DSL - Domestic Substances List (Canada); ECx -
Concentration associated with x% response; ELx - Loading rate associated with x% response;
EmS - Emergency Schedule; ENCS - Existing and New Chemical Substances (Japan); ErCx -
Concentration associated with x% growth rate response; ERG - Emergency Response Guide;
GHS - Globally Harmonized System; GLP - Good Laboratory Practice; IARC - International
Agency for Research on Cancer; IATA - International Air Transport Association; IBC - Interna-
tional Code for the Construction and Equipment of Ships carrying Dangerous Chemicals in Bulk;
IC50 - Half maximal inhibitory concentration; ICAO - International Civil Aviation Organization;
IECSC - Inventory of Existing Chemical Substances in China; IMDG - International Maritime Dan-
gerous Goods; IMO - International Maritime Organization; ISHL - Industrial Safety and Health
Law (Japan); ISO - International Organisation for Standardization; KECI - Korea Existing Chemi-
cals Inventory; LC50 - Lethal Concentration to 50 % of a test population; LD50 - Lethal Dose to
50% of a test population (Median Lethal Dose); MARPOL - International Convention for the Pre-
vention of Pollution from Ships; n.o.s. - Not Otherwise Specified; Nch - Chilean Norm; NO(A)EC -
No Observed (Adverse) Effect Concentration; NO(A)EL - No Observed (Adverse) Effect Level;
NOELR - No Observable Effect Loading Rate; NOM - Official Mexican Norm; NTP - National Tox-
icology Program; NZIoC - New Zealand Inventory of Chemicals; OECD - Organization for Eco-
nomic Co-operation and Development; OPPTS - Office of Chemical Safety and Pollution Preven-
tion; PBT - Persistent, Bioaccumulative and Toxic substance; PICCS - Philippines Inventory of
Chemicals and Chemical Substances; (Q)SAR - (Quantitative) Structure Activity Relationship;
REACH - Regulation (EC) No 1907/2006 of the European Parliament and of the Council concern-
14 / 15 800010034328
CA
SAFETY DATA SHEET
According to the Hazardous Products Regulations
GL-5 80W-90 Gear Lube

Version Revision Date: SDS Number: Print Date: 2019-01-29

1.1 2019-01-28 800010034328 Date of last issue: 08.01.2019
Date of first issue: 08.01.2019

ing the Registration, Evaluation, Authorisation and Restriction of Chemicals; SADT - Self-
Accelerating Decomposition Temperature; SDS - Safety Data Sheet; TCSI - Taiwan Chemical
Substance Inventory; TDG - Transportation of Dangerous Goods; TSCA - Toxic Substances Con-
trol Act (United States); UN - United Nations; UNRTDG - United Nations Recommendations on
the Transport of Dangerous Goods; vPvB - Very Persistent and Very Bioaccumulative; WHMIS -
Workplace Hazardous Materials Information System

A vertical bar (|) in the left margin indicates an amendment from the previous version.
Sources of key data used to : The quoted data are from, but not limited to, one or more
compile the Safety Data sources of information (e.g. toxicological data from Shell
Sheet Health Services, material suppliers’ data, CONCAWE, EU
IUCLID date base, EC 1272 regulation, etc).

Revision Date : 2019-01-28

The information provided in this Safety Data Sheet is correct to the best of our knowledge, infor-
mation and belief at the date of its publication. The information given is designed only as a guid-
ance for safe handling, use, processing, storage, transportation, disposal and release and is not
to be considered a warranty or quality specification. The information relates only to the specific
material designated and may not be valid for such material used in combination with any other
materials or in any process, unless specified in the text.

CA / EN

15 / 15 800010034328
CA