a.b.e.
® Construction Chemicals
dura proof
CONCRETE AND MORTAR WATERPROOFER
DESCRIPTION TYPICAL PHYSICAL PROPERTIES
dura.®proof is an additive containing fine particles which
Consistency Liquid
combine with the lime in the cement to form water-repellent
particles. These obstruct the capillary action within concrete. Density (typical) 1,00 g/m³ ± 0,01
Colour Iridescent blue
USES pH 8,5 ± 1
All types of cements (except aluminous). Freezing point About -1°C
• Concrete for foundations under the water table. CI ions content Nil to BS 5075
• Concrete for reservoirs and tanks. Na2O equivalent ≤ 0,1%
• Sealing grout for tanks. Dry extract 6% ± 0,6%
• Concrete and mortar in regular contact with water.
CLEANING
Tools, brushes and mixing equipment should be cleaned
ADVANTAGES immediately after use and before material has set with
• Enhances the waterproofing qualities of concrete, abe® super brush cleaner followed by washing with soap
mortar and plaster. and water.
• Does not modify the characteristics of fresh concrete.
PROTECTION ON COMPLETION
• Does not affect the compressive strength of concrete.
The newly applied mortar/concrete must be kept damp for at
least five days to promote good curing.
MIXING
TEMPERATURE AND RELATIVE HUMIDITY
Stir well before use.
Do not apply concrete if temperature is below 5°C.
COVERAGE
MODEL SPECIFICATION
Dosage: 1L/50kg (pocket) of cement.
A chloride-free, water-reducing additive to reduce the water
DOSAGE absorption qualities of all concrete, mortar or plaster. The
additive will be dura.®proof, a chloride-free, water-reducing
1 to 3,5kg each 100kg of cement. A 1.5% dosage of the
admixture applied in accordance with the recommendations
product to the weight of cement is commonly used
of a.b.e.® Construction Chemicals. The admixture will
comply with the requirements of ASTM C494F and PTV 500.
APPLICATIONS
dura.®proof is completely miscible in water. It must PACKAGING
be added to the mixing water. The optimum dosage of
dura.®proof is supplied in 1L, 5L and 25L containers
dura.®proof can only be established after trial tests, taking
into account local conditions affecting the workability
of the mix and the mechanical properties required from
the concrete.
a.b.e.® is an ISO 9001:2008 registered company
PO Box 5100, Boksburg North, 1461, South Africa
Website: www.abe.co.za | Tel: +27(0) 11 306 9000
Durban | Johannesburg | Cape Town | Port Elizabeth | East London | Bloemfontein | George
DATE UPDATED: 31/03/14
HANDLING & STORAGE IMPORTANT NOTE
This product has a shelf life of 12 months if kept in a dry cool This data sheet is issued as a guide to the use of the
place in the original packaging. In more extreme conditions product(s) concerned. Whilst a.b.e.® Construction
this period might be shortened. Chemicals endeavours to ensure that any advice,
recommendation, specification or information is accurate
HEALTH & SAFETY and correct, the company cannot - because a.b.e.® has no
dura.®proof should not be allowed contact with skin and direct or continuous control over where and how a.b.e.®
eyes. Avoid inhalation during mixing by wearing masks. The products are applied - accept any liability either directly
use of gloves, eye protection and masks is advised. Splashes or indirectly arising from the use of a.b.e.® products,
into eyes should be washed immediately with plenty of clean whether or not in accordance with any advice, specification,
water and medical advice sought thereafter. recommendation, or information given by the company.
CONFORMITY FURTHER INFORMATION
dura.®proof is a superplasticiser for high performance Where other products are to be used in conjunction
concrete which conforms to NF-EN 934-2. dura.®proof with this material, the relevant technical data sheets
conforms to ASTM C 494-F and Belgian PTV 500. All the should be consulted to determine total requirements.
constituents of dura.®proof are authorised according to the a.b.e.® Construction Chemicals has a wealth of
French regulations to be used in the fabrication of concrete technical and practical experience built up over years
and mortar products that come into contact with potable in the company’s pursuit of excellence in building and
water. A copy certificate of conformity is available. construction technology.
a.b.e.® is an ISO 9001:2008 registered company
PO Box 5100, Boksburg North, 1461, South Africa
Website: www.abe.co.za | Tel: +27(0) 11 306 9000
Durban | Johannesburg | Cape Town | Port Elizabeth | East London | Bloemfontein | George
DATE UPDATED: 31/03/14
