GENERAL Catalogue

INDEX
THE COMPANY 4
APPLICATIONS 6
RANGE 8
CORPORATE and HOMOLOGATIONS 10
PRODUCTS 11
GENERAL PURPOSE REFRIGERATION CONTROLLERS 11
THERMOMETER – temperature display 12
PRIME CX – NT and LT applications 14
PRIME D – NT and LT applications 20
UNIVERSAL-R – heating applications, NT and LT – 7 pre-configured maps 22
WING – NT and LT applications – compact/split format 26
MULTIPLEXED CABINET REFRIGERATION CONTROLLERS 35
XM200/400/600 – NT and LT multiplexed applications 36
ELECTRONIC EXPANSION VALVE DRIVERS 43
XEV – superheat regulation 44
ROOM CONTROLLERS 47
XLR100 COOL MATE – NT and LT applications 48
XLR400 COOL MATE –NT and LT applications with dual temperature management 50
XLH200/300 COOL MATE – NT and LT applications and maturing rooms
with temperature/humidity management 52
V-KIT – NT and LT applications – split format 54
CONTROLLERS for SPECIAL REFRIGERATED APPLICATIONS 55
XRB – bottle cooler applications 56
XB500 – blast chiller and temperature maintenance applications 58
XH200/300 – NT and LT refrigerated and maturing room applications
with temperature/humidity management 60
XR400 – NT and LT applications with dual temperature management 64
XR700 – NT and LT applications with HACCP function 66
XDL – temperature and status recording 68
XW700 – pharmaceutical applications 70
XR20/60 & XW20/60/300 – NT and LT refrigerated truck applications 72

2
COMPRESSOR RACK REFRIGERATION CONTROLLERS 75
XEV02 – Digital compressor applications
TM
76
XC10/30 – condensing unit applications 78
XC400/600 – up to 6 compressor/fan output applications also with inverter management 80
XC1000 – up to 15 compressor/fan output applications 84
iProRACK – up to 2 circuit and 6 compressor per circuit applications 90

FAN SPEED CONTROLLERS 93

XV300 – three-phase fan speed control 94
XV05/10/22/100 – single-phase fan speed control 96

TEMPERATURE/HUMIDITY/PRESSURE CONTROLLERS 99
XT100 – NTC, PTC, Pt100, TcJ, TcK, TcS, 4÷20mA, 0÷1V, 0÷10V multi-probe input 100

GENERAL PURPOSE PROGRAMMABLE CONTROLLERS 105

XEV20 – stepper electronic expansion valves management 106
iProGENIUS – general applications – high connectivity 108

GENERAL PURPOSE TOUCH SCREEN DISPLAY 117

TGIPG – high programmability 118

SYSTEMS 121
XWEB300D – alarm management and controlling 124
XWEB500 - XWEB500D – monitoring and controlling 126
XWEB3000 – industrial monitoring and controlling 128
XWEB5000 – monitoring, controlling and supervising 130
iCOOLL – wireless solution 137
XJM – I/O management 138
XJA-XJP-XJR – relay and acquisition management 140
XCENTER – centralized management 142

PROBES 145

ACCESSORIES 153

DIMENSIONS & CUT OUT 162

GENERAL TECHNICAL FEATURES 167

3
 HEADQ
UARTE
RS

THE COMPANY

HEADQUARTERS
Dixell, situated in Pieve d'Alpago (Belluno) and now part of the Emerson Climate
Technologies Group, is a dynamic Company that from the year 1996 to present
has positioned itself among world leaders of electronic Regulation and Control
in Industrial and Commercial Refrigeration, Conditioning and Cooking fields
thanks to continuous Technologic Innovation and a focus on Energy Saving
issues.

SALES, TRAINING
Worldwide, our products are distributed and supported in over 70 countries,
by a sales network of experienced and qualified personnel, guaranteeing the
correct selection of controllers and an efficient after sales service. Competence,
professionalism, and courtesy make our Customer Service Dept exemplary. It
provides our distributors and customers alike with technical support, solutions and
concise answers to issues that may arise. Constant technological development
and innovation of our products make us stand out in the market as the strategic
choice for most users. This and the continuous growth of our product range requires
constant training for our own staff and our distributors. To meet this challenge a
fully equipped training facility with the most advance computer technology has
been developed at our Belluno base.

IPRO ACADEMY
A center of excellence that combines innovation requests received from the HVAC/R
market combined with technological opportunities, in this way guaranteeing
continuous iPro programmable platform growth.

4
RESEARCH, DEVELOPMENT, PRODUCTION
Continuous research and development means that all of our controllers feature
the latest generation of microprocessors. Giving due consideration to the actual
needs of many users has lead us to develop Dixell’s fast and simple programming
methods. Most operating features are carefully developed through listening closely
to the requirements of our many users. Our “Research and Development” and our
“Production” departments are highly flexible, which means they can respond quickly
to specific customer requirements and offer appropriate solutions, now even more
competitive and flexible thanks to China bases. Highly sophisticated equipment is
now employed in the development and control of manufacturing. Here delicate and
repetitive tasks are mostly carried out by “state of the art” automatic systems.

QUALITY
Dixell has been awarded with ISO9001 certificate and it constantly commits
itself to quality in everything it does. The quality system of Dixell conforms to the
Quality System Standard UNI EN ISO 9001:2008.

ENVIRONMENT
Dixell firmly believes in the respect and safeguard of the environment, with
particular attention to all industrial processes and to the research and development
of new products.
Dixell’s strengths are the realization of regulators that combine high performance
with high energy savings and the use of eco-friendly components, in full
compliance with all Italian and International laws and standards. To this end Dixell
complies with the Material Compliance Program of Emerson respecting the RoHS
directive (2002/95/EC) and the REACH regulation (CE n. 1907/2006), asking
its suppliers accurate analysis on all purchased components. Furthermore packing
materials are in accordance with 2004/12/CE European Directive.

5
 APPLICATIONS

REFRIGERATION
Refrigeration requires the control of many different conditions to guarantee that
products are processed and stored correctly. Temperature, pressure and humidity
must be monitored with reliable devices that are also simple to manage. Whether
we are dealing with a compressor rack controller or the smallest refrigerator
or refrigerated transport, controllers must provide total solutions that provide
complete control.
Often, hidden behind a bottle cooler or pharmaceutical cabinet, lies the electronic
technology which is nowadays required, which is becoming more important and
plays a decisive role, both for the designer and for the consumer. The concepts of
integration, remote access, energy savings, functional aesthetics and connectivity
are important considerations on which even the wholesaler can always rely on.
Even regarding catering and food service, Dixell has years of experience in offering
products with excellent performance and durability including special applications
such as blast chiller processes used in freshly-cooked food conservation. Dixell’s
solutions to the introduction of food hygiene regulations (HACCP) offer immediate
advantages in terms of cost, time and system operation.

Compressor Catering & Food Service

Racks
Convenience Store
Petrol Station

REFRIGERATION Wholesalers

RETAIL

Bottle Cooler
Cold Rooms

Super/Hypermarkets Restaurant Chains

6
RETAIL
The complete solution that Dixell offers for the Retail field is a solution for every kind
of application, from petrol station to hypermarket up to convenience stores. If
there is an alarm, it is necessary to be advised quickly in order to intervene without
delay. Depending on the application, Dixell provides remote assistance systems for
local monitoring, for supervising or remote control including via Internet. Where
there are many points of sale, such as restaurant chains or distribution centers,
centralized management software for the Call Center is available.

CONTRACTING
Experience, combined with innovation, allows our products to be used in the most
diverse industrial applications; alarm management is very important for safety
and this is why all the controllers are designed to supply effective diagnostics
whether at local level or by connection to remote assistance system. Dixell devices
are particularly adaptable and make the application easy to use even in the
industrial automation field, thanks to the wide range of products available and
their compatibility with current safety standards.

INFO
For further information about all Dixell products please check out our Web Site
www.dixell.com.

7
 RANGE

PARAMETRIC CONTROLLERS
Different needs that crowd the refrigeration world are satisfied with a complete
series of parametric controllers with an innovative design and intuitive interfaces.
Intelligent algorithms, most of those are oriented toward the energy saving, and
innovative functions mark a range of products that includes different fields of
cooling world giving a wide range of general purpose solution, for multiplexed
cabinets, cabinets and rooms, bottle cooler, blast chiller, compressor racks and
refrigerated trucks. Specific solutions that are used also in applications such as
pharmaceutical or fan speed, food warming cabinets and ovens control and in
temperature, humidity and pressure regulation.

PROGRAMMABLE CONTROLLERS
The iPro family of controllers, whether dedicated for HVAC/R units or for general
purposes, is characterized by the most advanced technology in connectivity and
processing speed.
iPro controllers are based on a powerful platform that includes one hardware
configuration that is able to expand the actual solution in the market, and software
that, thanks to the ISaGRAF® development environment, allows the development
through standard programming languages.
An easy and useful HMI is also guaranteed through graphic displays and the
touch screen, as the expandability and the solution to many applications are
satisfied with a complete range of accessories, including I/O expansion modules,
proportional electronic valve management, modem, wirings, and more.

8
SYSTEMS
The XWEB System family is based on web technology used to satisfy monitoring
and supervising requirements in Commercial and Industrial Refrigeration fields
from small shops to hypermarkets, and refrigerated warehouses to food production
centers. Other potential fields are: chemical-pharmaceutical, oenological, naval,
museums, hospital, etc. Dixell Systems conform to HACCP rules; the CRO
(compressor rack optimization) reduced Set-point, anti-sweet heaters, lights and
the power peaks are used with the result of having an optimize energy savings. It
is also important to have the possibility to have integration with air conditioning
machines that are equipped with iCHILL and iPro Dixell controllers. For retrofitting
we offer ICOOLL wireless (RF) modules plus relay and acquisition module families
for probe inputs and alarm outputs. All XWEB’s can be connected anywhere with
XCENTER, the program for the centralized management for a modern and organized
Call Center, dedicated to alarm management and for a pro-active Service based
on the Oracle database.

PROBES and ACCESSORIES

A complete series of probes & transducers for temperature, humidity, and pressure
ensures that for every application the end user has the right level of accuracy and
the appropriate lead time.
A family of useful accessories such as modems, wirings, serial interfaces,
programming kits, and protections makes it easy, fast, and accurate to use each
instrument in every situation, especially with a remote connection or for energy
analysis.

9
 CORPORATE and
HOMOLOGATIONS
All the production conforms to CE norms with regards to low voltage and
electromagnetic compatibility. For many models, Dixell has the voluntary mark
at approval Authority (ENEC, usULc) ensuring a reliable international rules
conformance.

CE mark
It indicates conformity to the European Directives issued to guarantee the safety of the users and the
environment. It is obligatory for all products distributed within the European Community.
It does not replace the voluntary Quality Mark.

ENEC mark
Voluntary quality mark recognised as equivalent to the single national marks of the Countries adherent
to the accord. It certifies that a product conforms to the European norms EN, and that it has been
manufactured by a company with quality systems conforming to ISO 9000 norms.

UL mark
Voluntary quality mark, valid for the American Market. It certifies conformity of a product to the
American safety directives, which sometimes differ from European ones.

GOST-R
Voluntary certificate valid for the Russian Market. It certifies quality of supplied goods and their
conformity with norms and standards Russian Federation.

10
GENERAL PURPOSE
REFRIGERATION CONTROLLERS
SECTION INDEX
Functions MODELS

THERMOMETER – temperature display 12

LED thermometers XT11S – XT11CX – XA100C 13

PRIME CX – NT and LT applications 14

Thermostat and “off cycle” defrost controller XR10CX – XR20CX 16
Controllers for static applications XR30CX – XR35CX
XR40CX – XR50CX 16
Controllers for ventilated applications XR60CX – XR64CX
XR70CX – XR71CX – XR72CX
XR75CX – XR77CX 17
Controller for milk cooling and for air dryers XR80CX 19

PRIME D – NT and LT applications 20

Thermostat and “off cycle” defrost controller XR10D – XR20D 21
Controllers for static applications XR30D 21
Controllers for ventilated applications XR60D – XR70D 21
Controller for milk cooling XR80D 21

UNIVERSAL-R – heating applications, NT and LT – 7 pre-configured maps 22

Universal controller for service replacement UNIV-R4 23

WING – NT and LT applications – compact/split format 26

Innovative aesthetical solutions 24
Controllers for static applications XW20L – XW20LT – XW20LR
XW20LRT – XW20V – XW20VS
XW20K – XW40L – XW40K 29
Controllers for ventilated applications XW60L – XW60LT – XW60LR
XW60LRT – XW60V – XW60VS
XW60K – XW70L – XW70LT
XW70K – XW90L – XW90LT 31
Keyboards for controllers in K format CX620 – TX620 – T620T – VX620
TX820 – T820T - VX820 34

GENERAL PURPOSE REFRIGERATION CONTROLLERS 11

 CX: 32x74mm

S: 31x64mm C: 32x74mm

THERMOMETER: TEMPERATURE DISPLAY

• Measurement unit integrated on the display

• Hot Key or Prog Tool Kit connector for quick and easy programming (XA100C and XT11CX)
• 3VA max power absorption
• Display with red LED 11,5mm high (S format) or 13,2mm high (C and CX formats)
• Temperature alarm (XT11CX)

HOW to ORDER

XT11S X T 1 1 S - A B C 0 N For blue display please contact Dixell

A B C
Power supply Digits n°-measurement unit Display update delay
0 = 12Vac/dc 0 = °C - integer 0 = No delay
1 = 24Vac/dc 1 = °F - integer 1 = 1 min
4 = 110Vac 2 = °C - decimal point 2 = 3 min
5 = 230Vac

XT11CX X T 1 1 C X - A B C D 0 For blue display please contact Dixell

A B C D
Power supply Inputs Display update delay Measurement unit
4 = 110Vac P = PTC 0 = No delay C = °C
5 = 230Vac N = NTC 1 = 1 min F = °F
2 = 3 min

XA100C X A 1 0 0 C - A B 0 D U For blue display please contact Dixell

A B D
Power supply Measurement unit Input
0 = 12Vac/dc C = °C P = PTC (NTC)
1 = 24Vac/dc F = °F T = PTC (NTC, Pt100, TcJ, TcK, TcS)
4 = 110Vac B = Bar A = 4÷20mA, 0÷1V, 0÷10V
5 = 230Vac P = PSI B = PP07 (-0.5÷7bar)
H = %RH C = PP30 (0÷30bar)
N = No measurement unit D = PP11 (-0.5÷11bar)
H = XH10/20P

12 GENERAL PURPOSE REFRIGERATION CONTROLLERS

LED THERMOMETERS THERMOMETER

XT11S Digital thermometers with max and min log, powered directly by main voltage
XT11CX CX: 32x74mm
XA100C Configurable digital indicator

S: 31x64mm C: 32x74mm

FEATURES XT11S XT11CX XA100C

Display: n° digits ± 3 d.p. ± 3 d.p. ± 3 d.p.
12, 24Vac/dc 12, 24Vac/dc
Power supply 110, 230Vac
110, 230Vac 110, 230Vac
-40÷50°C
Measurement range probe dependent probe dependent
-40÷122°F
Inputs
NTC, PTC, Pt100
Probe NTC included NTC, PTC TcJ, TcK, TcS
4÷20mA, 0÷1V, 0÷10V

Other
Temperature alarm pres
Hot Key/Prog Tool Kit output pres pres
Digital input pres
Serial output TTL
Buzzer opt
Offset adjustment back side trimmer via keyboard via keyboard

XT11S XT11CX

XA100C

GENERAL PURPOSE REFRIGERATION CONTROLLERS 13

 CX: 32x74mm

PRIME CX SERIES: NT and LT APPLICATIONS

• Innovative digital controllers dedicated to heat and NT and LT refrigeration

• Easy and intuitive programming mode
• On/off key
• Energy saving cycles through digital input
• Fast freezing with dedicated set point
• Outputs restart with door open alarm
• Temperature Max and Min functions
• Configurable digital input also as probe
• Virtual probe management
• Cycles for milk cooling and storage systems
• Functions for refrigerated air dryers in automation processes
• Condenser temperature management to prevent critical plant situations
• Hot Key or Prog Tool Kit connector for quick and easy programming
• Serial connection to monitoring systems (direct for XR35/75/77CX or via XJ485CX)
• Connection for X-REP remote display (alternative to TTL output)
• 3VA max power absorption
• Display with red LED (10,5mm high) and icons

14 GENERAL PURPOSE REFRIGERATION CONTROLLERS

 Anti-condensing protection cover for terminal block
(MDP/CX see page 159)

Plastic front frame Light switch (up to 2)

(“WING” cut out compatible) (CXLS see page 160)
(FA/CX see page 158)

HOW to ORDER

PRIME CX X R C X - A B C D E For blue display please contact Dixell

A B C D E

X-REP output Compressor

Power supply Inputs Buzzer Measurement unit RTC Connections
(excludes TTL output) output
0 = 12Vac/dc N = NTC 0 = No No C = °C No 0 = 8A Screw
1 = 24Vac/dc P = PTC 1 = Yes No F = °F No 1 = 20A Screw
2 = 24Vac 2 = No Yes H = °C heating (only for XR10CX) No 3 = 16A Screw
4 = 110Vac 3 = Yes Yes L = °F heating (only for XR10CX) No 6 = 8A Faston
5 = 230Vac I* = °C Yes supercap 7 = 20A Faston
M* = °F Yes supercap 8 = 16A Faston
* Only for XR30/70CX

XR35/75/77CX X R C X - A B C D E For blue display please contact Dixell

A B C D E
Power supply Inputs Buzzer Measurement unit RTC Compressor output
0 = 12Vac/dc (only for XR77CX) N = NTC 6 = No C = °C No 0 = 8A
1 = 24Vac/dc (only for XR77CX) S = Pt1000 7 = Yes F = °F No 3 = 16A
4 = 110Vac I = °C Yes supercap
5 = 230Vac M = °F Yes supercap

XR80CX X R 8 0 C X - A B C D E For blue display please contact Dixell

A B C D E
Power supply Inputs Buzzer Measurement unit Compressor output
0 = 12Vac/dc N = NTC 0 = No C = °C 0 = 8A
4 = 110Vac P = PTC 1 = Yes F = °F 3 = 20A
5 = 230Vac

GENERAL PURPOSE REFRIGERATION CONTROLLERS 15

 THERMOSTAT and CONTROLLERS with “OFF CYCLE”
PRIME CX DEFROST for STATIC APPLICATIONS

XR10CX Digital thermostat with heating or cooling action

XR20CX Digital controller for NT with “off cycle” defrost

XR30CX Digital controller for NT with “off cycle” defrost and additional configurable relay

Digital controller for NT with “off cycle” defrost, additional configurable relay and
XR35CX RS485
CX: 32x74mm
XR40CX Digital controller for NT and LT with electrical or hot gas defrost

FEATURES XR10CX XR20CX XR30CX XR35CX XR40CX

Display: n° digits ± 3 d.p. ± 3 d.p. ± 3 d.p. ± 3 d.p. ± 3 d.p.
12, 24Vac/dc 12, 24Vac/dc 12, 24Vac/dc 12, 24Vac/dc
Power supply 110, 230Vac
24, 110, 230Vac 24, 110, 230Vac 24, 110, 230Vac 24, 110, 230Vac
Probe inputs
Thermostat NTC, PTC NTC, PTC NTC, PTC NTC, Pt1000 NTC, PTC
Thermostat 2
Defrost NTC, Pt1000 NTC, PTC
Defrost 2
NTC, PTC NTC, PTC NTC, PTC NTC, PTC
Condenser on HOT KEY on HOT KEY on HOT KEY
NTC, Pt1000 on HOT KEY

Digital inputs
Alarm, start defrost, AUX, door
config config config config config
switch, pressure switch, probe
Alarm, start defrost, AUX, door
config
switch, pressure switch
Relay outputs
Compressor 8A, 20A 8A, 20A 8A, 20A 8A, 16A 8A, 20A
Compressor 2
Thermostat 2
Defrost 8A
Defrost 2
Fans
Light or alarm 8A 8A
Anti-sweat
Agitator
Other
Hot Key/Prog Tool Kit output pres pres pres pres pres
Remote display output X-REP opt X-REP opt X-REP opt X-REP X-REP opt
Serial output TTL TTL TTL RS485 TTL
Buzzer opt opt opt opt opt
Real time clock opt opt

XR10CX - XR20CX XR30CX XR35CX XR40CX

16 GENERAL PURPOSE REFRIGERATION CONTROLLERS

CONTROLLERS for STATIC or VENTILATED
APPLICATIONS PRIME CX
Digital controller for NT and LT static applications with electrical or hot gas defrost
XR50CX and auxiliary relay

XR60CX Digital controller for NT and LT ventilated applications with dual humidity function

XR64CX Digital controller for NT and LT ventilated applications with dual evaporators
CX: 32x74mm

FEATURES XR50CX XR60CX XR64CX

Display: n° digits ± 3 d.p. ± 3 d.p. ± 3 d.p. ± 3 d.p. ± 3 d.p. ± 3 d.p.
12, 24Vac/dc 12, 24Vac/dc
Power supply 110, 230Vac 110, 230Vac 110, 230Vac 12Vac/dc
24, 110, 230Vac 24, 110, 230Vac
Probe inputs
Thermostat NTC, PTC NTC, PTC NTC, PTC NTC, PTC NTC, PTC NTC, PTC
Thermostat 2
Defrost NTC, PTC NTC, PTC NTC, PTC NTC, PTC NTC, PTC NTC, PTC
Defrost 2 NTC, PTC NTC, PTC
NTC, PTC NTC, PTC NTC, PTC NTC, PTC NTC, PTC NTC, PTC
Condenser on HOT KEY on HOT KEY on HOT KEY on HOT KEY on HOT KEY on HOT KEY

Digital inputs
Alarm, start defrost, AUX, door
config config config config config config
switch, pressure switch, probe
Alarm, start defrost, AUX, door
switch, pressure switch
Relay outputs
Compressor 8A, 16A 20A 8A, 16A 20A 8A, 16A 16A
Compressor 2
Thermostat 2
Defrost 8A 8A 8A 8A 8A 16A
Defrost 2 8A 16A
Fans 8A 5A 5A 16A
Light or alarm 8A 5A
Anti-sweat
Agitator
Other
Hot Key/Prog Tool Kit output pres pres pres pres pres pres
Remote display output X-REP opt X-REP opt X-REP opt X-REP opt X-REP opt X-REP opt
Serial output TTL TTL TTL TTL TTL TTL
Buzzer opt opt opt opt opt opt
Real time clock

XR50CX XR60CX XR64CX

GENERAL PURPOSE REFRIGERATION CONTROLLERS 17

PRIME CX CONTROLLERS for VENTILATED APPLICATIONS

XR70CX Digital controller for NT and LT with auxiliary relay and dual humidity function

XR71CX Digital controller for NT and LT with anti sweat heater management

XR72CX Digital controller for NT and LT with dual compressor management

CX: 32x74mm

FEATURES XR70CX XR71CX XR72CX

Display: n° digits ± 3 d.p. ± 3 d.p. ± 3 d.p. ± 3 d.p. ± 3 d.p. ± 3 d.p.

Power supply 110, 230Vac 12Vac/dc 110, 230Vac 12Vac/dc 110, 230Vac 12Vac/dc

Probe inputs
Thermostat NTC, PTC NTC, PTC NTC, PTC NTC, PTC NTC, PTC NTC, PTC
Thermostat 2
Defrost NTC, PTC NTC, PTC NTC, PTC NTC, PTC NTC, PTC NTC, PTC
Defrost 2
NTC, PTC NTC, PTC NTC, PTC NTC, PTC NTC, PTC NTC, PTC
Condenser
on HOT KEY on HOT KEY on HOT KEY on HOT KEY on HOT KEY on HOT KEY

Digital inputs
Alarm, start defrost, AUX, door
config config config config config config
switch, pressure switch, probe
Alarm, start defrost, AUX, door
switch, pressure switch
Relay outputs
Compressor 8A, 16A 16A 8A, 16A 16A 8A, 16A 16A
Compressor 2 8A 16A
Thermostat 2
Defrost 8A 16A 8A 16A 8A 16A
Defrost 2
Fans 5A 16A 5A 16A 5A 16A
Light or alarm 8A 16A
Anti-sweat 8A 16A
Agitator
Other
Hot Key/Prog Tool Kit output pres pres pres pres pres pres
Remote display output X-REP opt X-REP opt X-REP opt X-REP opt X-REP opt X-REP opt
Serial output TTL TTL TTL TTL TTL TTL
Buzzer opt opt opt opt opt opt
Real time clock opt opt

XR70CX XR71CX XR72CX

18 GENERAL PURPOSE REFRIGERATION CONTROLLERS

CONTROLLERS for VENTILATED APPLICATIONS
or for MILK COOLING and AIR DRYERS PRIME CX
Digital controller for NT and LT ventilated applications with auxiliary relay, dual humidity function
XR75CX and RS485

Digital controller for NT and LT ventilated applications with auxiliary relay, dual humidity function,
XR77CX RS485 and relay with separated common lines

XR80CX Digital controller for storage, milk cooling, and for refrigerated air dryers CX: 32x74mm

FEATURES XR75CX XR77CX XR80CX

Display: n° digits ± 3 d.p. ± 3 d.p. ± 3 d.p.
12, 24Vac/dc 12Vac/dc
Power supply 110, 230Vac
110, 230Vac 110, 230Vac
Probe inputs
Thermostat NTC, Pt1000 NTC/Pt1000 NTC, PTC
Thermostat 2
Defrost NTC, Pt1000 NTC, Pt1000
Defrost 2

Condenser NTC, Pt1000 NTC, Pt1000

Digital inputs
Alarm, start defrost, AUX, door
config config
switch, pressure switch, probe
Alarm, start defrost, AUX, door
config config config
switch, pressure switch
Relay outputs
Compressor 8A, 16A 8A, 12A 8A, 20A
Compressor 2
Thermostat 2
Defrost 8A 12A
Defrost 2
Fans 5A 5A
Light or alarm 8A 7A
Anti-sweat
Agitator 8A
Other
Hot Key/Prog Tool Kit output pres pres pres
Remote display output X-REP X-REP
Serial output RS485 RS485 TTL
Buzzer opt opt opt
Real time clock opt opt

XR75CX XR77CX XR80CX

GENERAL PURPOSE REFRIGERATION CONTROLLERS 19

 D: 4 DIN Rail

PRIME D SERIES: NT and LT APPLICATIONS

• Innovative digital controllers dedicated to normal and low temperature refrigerated applications
• Direct line power supply 230 (110)Vac. No external transformer required
• Direct driving of compressors up to 1,2HP, (20A relay inside)
• Pre-programming of the main control variables, easy and intuitive programming mode
• Keyboard lock, alarm signalling by relay, display or buzzer
• Configurable digital input for door swtich, defrost, general or serious alarm
• Auxiliary relay activated through keys or digital input
• Hot Key connector for quick and easy programming
• HACCP function
• 3VA max power absorption
• Display with red LED (13,2mm high)

HOW to ORDER

PRIME D X R D - A B C D E For blue display please contact Dixell

A B C D E
Power supply Inputs Buzzer Measurement unit Compressor output
2 = 24Vac P = PTC 0 = No C = °C 0 = 8A
4 = 110Vac N = NTC 1 = Yes F = °F 1 = 20A
5 = 230Vac H = °C heating only for XR10D
L = °F heating only for XR10D

20 GENERAL PURPOSE REFRIGERATION CONTROLLERS

THERMOSTAT and CONTROLLERS for STATIC or
VENTILATED APPLICATIONS or for MILK COOLING PRIME D
XR10D Digital thermostat with heating or cooling action

XR20D Digital controller for NT with “off cycle” defrost

XR30D Digital controller for NT with “off cycle” defrost and additional configurable relay

XR60D Digital controller for NT and LT ventilated applications with door switch capability

XR70D Digital controller for NT and LT ventilated applications with door switch capability and auxiliary relay

XR80D Digital controller for milk cooling with agitation cycle capability D: 4 DIN Rail

FEATURES XR10D XR20D XR30D XR60D XR70D XR80D

Display: n° digits ± 3 d.p. ± 3 d.p. ± 3 d.p. ± 3 d.p. ± 3 d.p. ± 3 d.p.
Power supply 24, 110, 230Vac 24, 110, 230Vac 24, 110, 230Vac 24, 110, 230Vac 24, 110, 230Vac 24, 110, 230Vac
Probe inputs
Thermostat NTC, PTC NTC, PTC NTC, PTC NTC, PTC NTC, PTC NTC, PTC
Defrost NTC, PTC NTC, PTC
Digital inputs
Alarm, start defrost, AUX, door
config config config config config
switch, pressure switch
Relay outputs
no 8A/nc 5A, no 8A/nc 5A, no 8A/nc 5A, no 8A/nc 5A, no 8A/nc 5A, no 8A/nc 5A,
Compressor
20A 20A 20A 20A 20A 20A
Defrost no 8A/nc 5A no 8A/nc 5A
Fans 8A 8A
Alarm no 8A/nc 5A
Agitator no 8A/nc 5A
Alarm or auxiliary no 8A/nc 5A
Other
Functions HACCP HACCP HACCP HACCP HACCP min/max
Hot Key output pres pres pres pres pres pres
Buzzer opt opt opt opt opt opt

XR10D - XR20D XR30D

XR60D XR70D XR80D

GENERAL PURPOSE REFRIGERATION CONTROLLERS 21

 CX: 32x74mm

UNIVERSAL-R: HEATING APPLICATIONS, NT and LT

7 PRE-CONFIGURED MAPS

• Designed to replace over 150 models of refrigeration/heating controllers in 32x74mm format

• Easy and quick installation
• Rapid set-up in 3 simple steps
• Dual voltage power supply 12Vac/dc and 230Vac
• Specific functions to control twin evaporator defrost
• Automatic probe detection
• Complete condenser management
• Hot Key or Prog Tool Kit connector for quick and easy programming
• 3VA max power absorption
• Display with red LED (10,5 mm high) and icons
• 7 pre-configured applications selectable from parameter
= on/off thermostat – cooling
= thermostat with off cycle defrost
= thermostat with electric/hot gas defrost, time initiated and time terminated
= thermostat with electric/hot gas defrost, time initiated and temperature terminated
= thermostat with electric/hot gas defrost, time initiated and temperature terminated and evaporator fan
= twin evaporator defrost applications
= on/off thermostat - heating

HOW to ORDER

UNIVERSAL-R U N I V - R 4 - 6 B 1 D 0

B D
Inputs Measurement unit
P = PTC C = °C
N = NTC F = °F

22 GENERAL PURPOSE REFRIGERATION CONTROLLERS

UNIVERSAL CONTROLLER for SERVICE
REPLACEMENT UNIVERSAL-R

Controller for service replacement of refrigeration and heating controllers

UNIV-R4 with 7 pre-configured maps

CX: 32x74mm

UNIV-R4 UNIV-R4 UNIV-R4 UNIV-R4 UNIV-R4 UNIV-R4 UNIV-R4

FEATURES
(tC=1) (tC=2) (tC=3) (tC=4) (tC=5) (tC=6) (tC=7)
Display: n° digits ± 3 d.p. ± 3 d.p. ± 3 d.p. ± 3 d.p. ± 3 d.p. ± 3 d.p. ± 3 d.p.
12Vac/dc 12Vac/dc 12Vac/dc 12Vac/dc 12Vac/dc 12Vac/dc 12Vac/dc
Power supply
230Vac 230Vac 230Vac 230Vac 230Vac 230Vac 230Vac
Probe inputs
Thermostat NTC, PTC NTC, PTC NTC, PTC NTC, PTC NTC, PTC NTC, PTC NTC, PTC
Defrost NTC, PTC NTC, PTC NTC, PTC
Defrost 2 NTC, PTC
Digital inputs
Alarm, defrost, AUX, door switch,
pressure switch, ON/OFF, 2 x config 2 x config 2 x config 2 x config 2 x config 1 x config 2 x config
energy saving

Relay outputs
Compressor 8A 8A 8A 8A 8A 8A
Defrost 8A 8A 8A 8A
Defrost 2 8A
Fans 8A 8A
Light or alarm 8A 8A 8A 8A 8A 8A
Heating 8A
Other
Hot Key/Prog Tool Kit output pres pres pres pres pres pres pres
Buzzer pres pres pres pres pres pres pres

UNIV-R4 (tC 1-2) UNIV-R4 (tC 3) UNIV-R4 (tC 4)

UNIV-R4 (tC 5) UNIV-R4 (tC 6) UNIV-R4 (tC 7)

GENERAL PURPOSE REFRIGERATION CONTROLLERS 23

 WING: INNOVATIVE AESTHETICAL SOLUTIONS

The WING family, characterized by a high aesthetical value, presents a series of solutions able to satisfy every need in refrigeration
field especially when the design becomes a fundamental, such as for cream freezers or pastry refrigerators etc... This series is
available in classic formats, Compact (L and V) and Split (K), with vertical or horizontal keyboard. In particular, horizontal format
is divided in 2 macro families:
- WING TOUCH;
- WING STANDARD (available also INOX or BACK-PANEL with POLYCARBONATE).
Great versatility and customization are given to these models thanks to the reduced space (LR) and to the display with icons
that, depending on the model, can be white, red or blue.

WING TOUCH
• Capacitive TOUCH technology
• Frontal backlit IP65
• Standard or back-panel front
mounting

Standard front mounting

Back-panel mounting
with PM-WLT bracket
(surface thickness 0.8÷1.0mm)

MOUNTING OPTIONS
Depending on the model, Dixell gives different mounting solutions. High protection, great aesthetic value, easy and quick fixing mode are guaranteed by the
solutions below:

STANDARD mounting BACK-PANEL mounting BACK-PANEL mounting

with screws with captive screws (PG-L with PM-WL(T)
bracket optional) dedicated bracket

Adhesive
PG-L plastic
support

Screws

Captive screws PM-WL

(PM-WLT)

The PM-WL (PM-WLT for WING TOUCH) bracket, developed by Dixell, is the
ideal solution for back-panel mounting without using captive screws. The fixing
system is composed of 2 parts: one adhesive to be put on the panel, and one
movable to hold the instrument.

24 GENERAL PURPOSE REFRIGERATION CONTROLLERS

WING STANDARD
• Frontal glass frame to protect the keys
• Standard front mounting

IP65

WING INOX BACK-PANEL with POLYCARBONATE

option option
• Front polycarbonate that can be easily
customized
IP65 • Back-panel mounting

IP65
• Bright or satinized steel front
• Standard or back-panel front mounting

Standard front
mounting
Back-panel mounting with captive
screws (+ PG-L protection)
or using the PM-WL bracket
(surface thickness 0.8÷1.0mm)
Back-panel mounting with captive
screws (+ PG-L protection)
or using the PM-WL bracket
(surface thickness 0.8÷1.0mm)

Front Back-panel mounting Back-panel mounting

Formats
mounting with captive screws with bracket

WING TOUCH LT, LRT, TOUCH keyboards yes no yes with PM-WLT bracket

WING standard L, LR, T keyboards yes no no

WING INOX option L, LR, T keyboards yes yes with PG-L bracket optional yes with PM-WL bracket

WING POLYCARBONATE option L, LR, T keyboards no yes with PG-L bracket optional yes with PM-WL bracket

GENERAL PURPOSE REFRIGERATION CONTROLLERS 25

 32x74mm

K: 8 DIN Rail V: 100x64mm

100x64mm

L: 38x185mm

L: 38x185mm
38x185mm

WING SERIES: NT and LT APPLICATIONS – COMPACT/SPLIT FORMAT

• Innovative controllers with different aesthetic solutions that enhance the final product
• Direct live and neutral load connections for reduction of wiring costs
• Direct driving of compressors up to 1,2HP (20A relay inside)
• Direct line power supply. No external transformer required
• Up to 8 push buttons with direct action for user friendly interface
• Maximum and minimum temperature recording
• High and low humidity control simple or floating
• Smart defrost
• Integrated functions for energy saving
• Continuous cycle with a dedicated set point
• Virtual probe management
• Hot Key or Prog Tool Kit connector for quick and easy programming
• Connection for X-REP remote display
• Serial connection to monitoring systems
• 7VA max power absorption
• LED display (10,5mm high) and icons

LR and VS formats are the specific solution for all applications with a reduced space

40 39

LR VS

26 GENERAL PURPOSE REFRIGERATION CONTROLLERS

Controllers are provided with a wide display
with integrated icons of the real time situation
and the measurement unit, for clear and
continuous monitoring.

HOW to ORDER
For inox, blue display, back-panel
WING L X W L - A B C D E - N with polycarbonate version please contact Dixell

A B C D E
Power supply Inputs Light relay Buzzer RTC Measurement unit X-REP
2 = 24Vac N = NTC 8A 0 = No No C = °C 0 = No
4 = 110Vac P = PTC 8A 1 = Yes No F = °F 1 = Yes
5 = 230Vac L = NTC 16A 2 = No Yes supercap
M = PTC 16A 3 = Yes Yes supercap
Q = NTC 16A neon
R = PTC 16A neon

WING LT X W L T - A B C D E

WING LT back-panel mounting X W L T - A B C D E - R

A B C D E
Power supply Inputs RTC Measurement unit Display X-REP
2 = 24Vac N = NTC 1 = No W = °C White 0 = No
4 = 110Vac P = PTC 3 = Yes supercap Y = °F White 1 = Yes
5 = 230Vac C = °C Red
F = °F Red
D = °C Blue
G = °F Blue

For inox, blue display, back-panel

WING LR X W L R - A B C D 0 - N with polycarbonate version please contact Dixell

A B C D
Power supply Inputs Buzzer RTC Measurement unit
4 = 110Vac N = NTC 0 = No No C = °C
5 = 230Vac P = PTC 1 = Yes No F = °F
2 = No Yes supercap
3 = Yes Yes supercap

GENERAL PURPOSE REFRIGERATION CONTROLLERS 27

 HOW to ORDER

WING LRT X W L R T - A B C D 0

WING LRT back-panel mounting X W L R T - A B C D 0 - R

A B C D
Power supply Inputs RTC Measurement unit Display
4 = 110Vac N = NTC 1 = No W = °C White
5 = 230Vac P = PTC 3 = Yes supercap Y = °F White
C = °C Red
F = °F Red
D = °C Blue
G = °F Blue

WING V X W V - A B C D E For blue display please contact Dixell

WING VS X W V S - A B C D 0 For blue display please contact Dixell

A B C D E
Power supply Inputs Buzzer Measurement unit Compressor output
2 = 24Vac N = NTC 0 = No C = °C 0 = 8A
4 = 110Vac P = PTC 1 = Yes F = °F 1 = 20A
5 = 230Vac

WING K X W K - A B C D E

A B C D E
Power supply Inputs/light relay Housing Measurement unit RTC
2 = 24Vac N = NTC 0 = Open board “OS” C = °C 0 = No
4 = 110Vac P = PTC 1 = Open board + 8 DIN Rail base F = °F 2 = Yes supercap
5 = 230Vac L = NTC/16A neon 2 = 8 DIN Rail 4 = Battery
M = PTC/16A neon 3 = “GS” housing

For inox and back-panel with polycarbonate

CX/TX/VX KEYBOARDS X 2 0 - A 0 0 N 0 version on TX keyboards please contact Dixell

For blue display please contact Dixell

A
Buzzer
0 = No
1 = Yes

TOUCH KEYBOARDS T 2 0 T - 1 0 0 D 0

TOUCH KEYBOARDS back-panel mounting T 2 0 T - 1 0 0 D 0 - R

D
Display
N = Red
R = Blue
W = White

28 GENERAL PURPOSE REFRIGERATION CONTROLLERS

CONTROLLERS for STATIC APPLICATIONS WING
XW20L Digital controller for NT with “off cycle” defrost

Digital controller for NT with “off cycle” defrost, TOUCH interface and red, white or
XW20LT blue display

XW20LR Digital controller for NT with “off cycle” defrost and reduced depth L, LR: 38x185mm LT, LRT: 38x185mm
Digital controller for NT with “off cycle” defrost, reduced depth, TOUCH interface and
XW20LRT red, white or blue display

FEATURES XW20L XW20LT XW20LR XW20LRT

Display: n° digits ± 3 d.p. ± 3 d.p. ± 3 d.p. ± 3 d.p.

Keyboard: push buttons 6 6 6 6

Power supply 24, 110, 230Vac 24, 110, 230Vac 110, 230Vac 110, 230Vac
Probe inputs
Thermostat NTC, PTC NTC, PTC NTC, PTC NTC, PTC
Defrost NTC, PTC NTC, PTC NTC, PTC NTC, PTC
Condenser NTC, PTC NTC, PTC NTC, PTC NTC, PTC
Display NTC, PTC NTC, PTC
Digital inputs
Alarm, start defrost, door switch,
config config config config
pressure switch, probe
DI 2 config config config config
Relay outputs
Compressor 20A 20A 20A 20A
Defrost
Fans
Light 8A, 16A 8A 8A 8A
Alarm, AUX
RL 6 configurable
Other
Hot Key/Prog Tool Kit output pres pres pres pres
Remote display output X-REP opt X-REP opt
Serial output TTL TTL TTL TTL
Triac output
Buzzer opt pres opt pres
Real time clock opt opt opt opt

XW20L XW20LT

XW20LR - XW20LRT

GENERAL PURPOSE REFRIGERATION CONTROLLERS 29

WING CONTROLLERS for STATIC APPLICATIONS

XW20V Digital controller for NT with “off cycle” defrost

L: 38x185mm
XW20VS Digital controller for NT with “off cycle” defrost and reduced depth

XW20K Digital controller in split format for NT with “off cycle” defrost

XW40L Digital controller for NT and LT with electrical or hot gas defrost function

XW40K Digital controller in split format for NT and LT with electrical or hot gas defrost function
V, VS: 100x64mm K: OS/GS/8 DIN Rail

FEATURES XW20V XW20VS XW20K XW40L XW40K

Display: n° digits ± 3 d.p. ± 3 d.p. on keyboard ± 3 d.p. ± 3 d.p. on keyboard ± 3 d.p.
6 (on CX620, TX620, 6 (on CX620, TX620,
Keyboard: push buttons 6 6
T620T, VX620) T620T, VX620)
Power supply 24, 110, 230Vac 24, 110, 230Vac 24, 110, 230Vac 24, 110, 230Vac 24, 110, 230Vac
Probe inputs
Thermostat NTC, PTC NTC, PTC NTC, PTC NTC, PTC NTC, PTC
Defrost NTC, PTC NTC, PTC
Condenser NTC, PTC NTC, PTC NTC, PTC
Display NTC, PTC NTC, PTC NTC, PTC NTC, PTC
Digital inputs
Alarm, start defrost, door switch,
config config config config config
pressure switch, probe
DI 2 config
Relay outputs
Compressor 8A, 20A 16A 20A 20A 20A
Defrost 8A 16A
Fans
Light 16A 16A 16A 8A, 16A 16A
Alarm, AUX
RL 6 configurable
Other
Hot Key/Prog Tool Kit output pres pres pres pres pres
Remote display output X-REP opt
Serial output TTL TTL TTL
Triac output
Buzzer opt opt on keyboard opt on keyboard
Real time clock opt opt opt

XW20V XW20VS XW20K

XW40L XW40K

30 GENERAL PURPOSE REFRIGERATION CONTROLLERS

CONTROLLERS for VENTILATED APPLICATIONS WING
XW60L Digital controller for NT and LT with electrical or hot gas defrost function and fans

Digital controller for NT and LT with electrical or hot gas defrost function and fans, TOUCH interface
XW60LT and red, white or blue display
L, LR: 38x185mm
XW60LR Digital controller for NT and LT with electrical or hot gas defrost function and fans and reduced depth

Digital controller for NT and LT with electrical or hot gas defrost function and fans, reduced depth,
XW60LRT TOUCH interface and red, white or blue display

XW60V Digital controller for NT and LT with electrical or hot gas defrost function and fans
LT, LRT: 38x185mm V, VS: 100x64mm
XW60VS Digital controller for NT and LT with electrical or hot gas defrost function and fans and reduced depth

FEATURES XW60L XW60LT XW60LR XW60LRT XW60V XW60VS

Display: n° digits ± 3 d.p. ± 3 d.p. ± 3 d.p. ± 3 d.p. ± 3 d.p. ± 3 d.p.

Keyboard: push buttons 6 6 6 6 6 5

Power supply 24, 110, 230Vac 24, 110, 230Vac 110, 230Vac 110, 230Vac 24, 110, 230Vac 24, 110, 230Vac
Probe inputs
Thermostat NTC, PTC NTC, PTC NTC, PTC NTC, PTC NTC, PTC NTC, PTC
Defrost NTC, PTC NTC, PTC NTC, PTC NTC, PTC NTC, PTC NTC, PTC
Condenser NTC, PTC NTC, PTC NTC, PTC NTC, PTC
Display NTC, PTC NTC, PTC NTC, PTC
Digital inputs
Alarm, start defrost, door switch,
config config config config config config
pressure switch, probe
DI 2 config config config config
Relay outputs
Compressor 20A 20A 20A 20A 8A, 20A 16A
Defrost 8A 16A 8A 8A 8A 16A
Fans 8A 8A 5A 5A 8A 8A
Light 8A, 16A 8A 5A 5A 16A
Alarm, AUX
RL 6 configurable
Other
Hot Key/Prog Tool Kit output pres pres pres pres pres pres
Remote display output X-REP opt X-REP opt
Serial output TTL TTL TTL TTL
Triac output
Buzzer opt pres opt pres opt opt
Real time clock opt opt opt opt

XW60L XW60LT

XW60LR - XW60LRT XW60V XW60VS

GENERAL PURPOSE REFRIGERATION CONTROLLERS 31

WING CONTROLLERS for VENTILATED APPLICATIONS

XW60K Digital controller in split format for NT and LT with electrical or hot gas defrost function and fans

L: 38x185mm Digital controller in split format for NT and LT with electrical or hot gas defrost function, fans and
XW70L auxiliary relay

Digital controller for NT and LT with electrical or hot gas defrost function, fans and auxiliary relay,
XW70LT TOUCH interface and red, white or blue display

Digital controller in split format for NT and LT with electrical or hot gas defrost function, fans,
XW70K auxiliary relay and triac (ON/OFF)
LT: 38x185mm K: OS/GS/8 DIN Rail

FEATURES XW60K XW70L XW70LT XW70K

Display: n° digits on keyboard ± 3 d.p. ± 3 d.p. ± 3 d.p. on keyboard ± 3 d.p.
6 (on CX620, TX620, T620T, 8 (on TX820, T820T,
Keyboard: push buttons 8 8
VX620) VX820)
Power supply 24, 110, 230Vac 24, 110, 230Vac 24, 110, 230Vac 24, 110, 230Vac
Probe inputs
Thermostat NTC, PTC NTC, PTC NTC, PTC NTC, PTC
Defrost NTC, PTC NTC, PTC NTC, PTC NTC, PTC
Condenser NTC, PTC NTC, PTC NTC, PTC NTC, PTC
Display NTC, PTC NTC, PTC NTC, PTC NTC, PTC
Digital inputs
Alarm, start defrost, door switch,
config config config config
pressure switch, probe
DI 2 config config config
Relay outputs
Compressor 20A 20A 20A 20A
Defrost 16A 8A 16A 16A
Fans 8A 8A 8A 8A
Light 16A 8A, 16A 8A 16A
Alarm, AUX 8A 8A
RL 6 configurable
Other
Hot Key/Prog Tool Kit output pres pres pres pres
Remote display output X-REP opt X-REP opt
Serial output TTL TTL TTL TTL
Triac output 2A
Buzzer on keyboard opt pres on keyboard
Real time clock opt opt opt opt

XW60K XW70L

XW70LT XW70K

32 GENERAL PURPOSE REFRIGERATION CONTROLLERS

CONTROLLERS for VENTILATED APPLICATIONS WING

Digital controller for NT and LT with electrical or hot gas defrost function, fans, auxiliary relay
XW90L and sixth relay configurable

Digital controller for NT and LT with electrical or hot gas defrost function, fans, auxiliary relay L: 38x185mm LT: 38x185mm
XW90LT and sixth relay configurable, TOUCH interface and red, white or blue display

FEATURES XW90L XW90LT

Display: n° digits ± 3 d.p. ± 3 d.p.

Keyboard: push buttons 8 8

Power supply 24, 110, 230Vac 24, 110, 230Vac

Probe inputs
Thermostat NTC, PTC NTC, PTC
Defrost NTC, PTC NTC, PTC
Condenser NTC, PTC NTC, PTC
Display NTC, PTC NTC, PTC
Digital inputs
Alarm, start defrost, door switch,
config config
pressure switch, probe
DI 2 config config
Relay outputs
Compressor 20A 20A
Defrost 8A 16A
Fans 8A 8A
Light 8A, 16A 8A
Alarm, AUX 8A 8A
RL 6 configurable 8A 8A
Other
Hot Key/Prog Tool Kit output pres pres
Remote display output X-REP opt X-REP opt
Serial output TTL TTL
Triac output
Buzzer opt pres
Real time clock opt opt

XW90L XW90LT

GENERAL PURPOSE REFRIGERATION CONTROLLERS 33

WING KEYBOARDS for CONTROLLERS in K FORMAT
CX620 6 key keyboard (32x74mm) for controllers in K format

TX620 6 key keyboard (horizontal WING) for controllers in K format

32x74mm 38x185mm T620T 6 key keyboard for controllers in K format with TOUCH interface and red, white and blue display

VX620 6 key keyboard (vertical WING) for controllers in K format

TX820 8 key keyboard (horizontal WING) for controllers in K format

38x185mm 100x64mm
T820T 8 key keyboard for controllers in K format with TOUCH interface and red, white and blue display

VX820 8 key keyboard (vertical WING) for controllers in K format

FEATURES CX620 TX620 T620T VX620 TX820 T820T VX820

Display: n° digits ± 3 d.p. ± 3 d.p. ± 3 d.p. ± 3 d.p. ± 3 d.p. ± 3 d.p. ± 3 d.p.

Keyboard: push buttons 6 6 6 6 8 8 8

Power supply from controller from controller from controller from controller from controller from controller from controller
XW20K XW20K XW20K XW20K
Slave module XW40K XW40K XW40K XW40K XW70K XW70K XW70K
XW60K XW60K XW60K XW60K
Buzzer opt opt pres opt opt pres opt

The keyboards CX, TX and VX are provided with a wide display with integrated icons of
real time situation and measurement unit, for clear and continuous monitoring.

The POWER MODULES in K FORMAT are AVAILABLE in 4 DIFFERENT VERSIONS

OS: open board GS: with plastic housing 225x180x84mm

8 DIN Rail base: open board with 8 DIN bottom 8 DIN Rail: with 8 DIN plastic housing

34 GENERAL PURPOSE REFRIGERATION CONTROLLERS

MULTIPLEXED CABINET
REFRIGERATION CONTROLLERS
SECTION INDEX
FUNCTIONS MODELS

XM200/400/600 – NT and LT multiplexed applications 35

Controllers for static or ventilated applications XM244L – XM440K - XM460K
XM470K 38
Controllers for ventilated applications with EEV management XM660K - XM668D - XM669K
XM670K - XM678D – XM679K 40
Keyboards for controllers in K format CX640 – T640 – V640
CX660 – T660T – T840 – V840 42
Accessories XM-RTC – XM-FC16
XM-FC21 – XM-FC26 42

MULTIPLEXED CABINET REFRIGERATION CONTROLLERS 35

 K: OS/GS
32x74mm

D, K: 8 DIN Rail 100x64mm

38x185mm

L: 38x185mm
38x185mm

XM200/400/600 SERIES: NT and LT APPLICATIONS

• Multifunction controllers for multiplexed applications

• Multi-master devices (XM400/600)
• Up to 5 controllers linked for XM400 series and up to 8 for XM600 series
• Internal Real Time Clock
• Superheat adaptive control (XM600)
• Integrated ON/OFF or stepper electronic expansion valve drive (XM600)
• Anti-sweat heater management through a “DEW POINT” (XM600)
• Virtual probe management (XM600)
• Evaporating fans speed management via PWM or 4÷20mA/0÷10V (XM600)
• XM668D and XM678D models certified by Alco to be used combined with EX4, EX5, EX6 valves
• Keyboard with direct access to the main functions (also with TOUCH interface)
• Hot Key or Prog Tool Kit connector for quick and easy programming
• Serial connection to monitoring systems
• 10VA max power absorption
• Display with red LED (13,2 mm high), (10,5mm and icons for CX format and WING TOUCH)

MULTIPLEXED CABINET APPLICATIONS with CONTROLLERS in K FORMAT

SECTION 1 SECTION 2 SECTION 3
MULTIPLEXED
CABINET

CONTROLLERS LAN 2 wires up to 8

RS485 network
to monitoring system
opt opt opt

KEYBOARD KEYBOARD KEYBOARD

36 MULTIPLEXED CABINET REFRIGERATION CONTROLLERS

HOW to ORDER

XM200L X M 2 4 4 L - A B C D 0 For inox version and blue display please contact Dixell

A B C D
Power supply RTC Buzzer Measurement unit
4 = 110Vac 0 = No 0 = No C = °C
5 = 230Vac 1 = Yes 1 = Yes F = °F

XM400K X M 4 K - A B C D E

A B C D E
Power supply RTC Housing Measurement unit RS485 output
4 = 110Vac 0 = No 0 = Open board “OS” C = °C 0 = No
5 = 230Vac 1 = Yes 1 = “GS” housing F = °F 1 = Yes

XM600D X M 6 8 D - 2 B C D E

B C D E
Inputs RTC RS485 Measurement unit Modulating output Connections
N = NTC/4÷20mA 0 = No No C = °C/Bar 0 = No Disconnectable + screw
O = NTC/0÷5V 1 = No Yes F = °F/PSI 1 = No Screw
P = Pt1000/4÷20mA 2 = Yes No 2 = 4÷20mA/0÷10V Disconnectable + screw
Q = Pt1000/0÷5V 3 = Yes Yes 3 = 4÷20mA/0÷10V Screw
4 = PWM Disconnectable + screw
5 = PWM Screw

XM600K X M 6 K - A B C D E

A B C D E
Power supply Inputs RTC RS485 Housing Measurement unit Modulating output Connections
4 = 110Vac N = NTC/4÷20mA 0 = No No 8 DIN Rail C = °C/Bar 0 = No Disconnectable + screw
5 = 230Vac O = NTC/0÷5V 1 = No Yes 8 DIN Rail F = °F/PSI 1 = No Screw
P = Pt1000/4÷20mA 2 = Yes No 8 DIN Rail 2 = 4÷20mA/0÷10V Disconnectable + screw
Q = Pt1000/0÷5V 3 = Yes Yes 8 DIN Rail 3 = 4÷20mA/0÷10V Screw
4 = No No Open board 4 = PWM Disconnectable + screw
5 = No Yes Open board 5 = PWM Screw
6 = Yes No Open board
7 = Yes Yes Open board

T/V KEYBOARDS 4 0 - A 0 0 D 0 For inox version and blue display on T keyboard please contact Dixell

CX KEYBOARDS C X 6 0 - A 0 0 N 0 For blue display please contact Dixell

A D
Buzzer Measurement unit
0 = No C = °C
1 = Yes F = °F

TOUCH KEYBOARDS T 6 6 0 T - 1 0 0 D 0

TOUCH KEYBOARDS back-panel mounting T 6 6 0 T - 1 0 0 D 0 - R

D
Display
N = Red
R = Blue
W = White

MULTIPLEXED CABINET REFRIGERATION CONTROLLERS 37

XM200 CONTROLLER for MULTIPLEXED VENTILATED APPLICATIONS

Digital controller in compact format for NT and LT ventilated applications with 4 defrost
XM244L management

L: 38x185mm

FEATURES XM244L
Display: n° digits ± 3 d.p.
Keyboard: push buttons 5
Power supply 110, 230Vac
Probe inputs
Thermostat NTC
Defrost NTC
Defrost 2 NTC
Defrost 3 NTC
Defrost 4 NTC
Relay outputs
Compressor 8A
Defrost 8A
Defrost 2 8A
Defrost 3 8A
Defrost 4 8A
Fans 8A
Other
Hot Key/Prog Tool Kit output pres
Serial output TTL
Buzzer opt
Real time clock opt

XM244L

38 MULTIPLEXED CABINET REFRIGERATION CONTROLLERS

CONTROLLERS for STATIC or VENTILATED MULTIPLEXED
APPLICATIONS XM400
XM440K Digital controller for NT and LT static applications

XM460K Digital controller for NT and LT ventilated applications

XM470K Digital controller for NT and LT ventilated applications with auxiliary output
K: OS/GS

FEATURES XM440K XM460K XM470K

Display: n° digits on keyboard ± 3 d.p. on keyboard ± 3 d.p. on keyboard ± 3 d.p.
Keyboard: push buttons 6 (on CX640, T640, V640) 6 (on CX640, T640, V640) 8 (on T840, V840)
Power supply 110, 230Vac 110, 230Vac 110, 230Vac
Probe inputs
Thermostat NTC NTC NTC
Defrost NTC NTC NTC
Display NTC NTC NTC
AUX
Suction pressure
Condensing pressure
Digital inputs
Start defrost, pressure switch, AUX, generic alarm,
config config config
serious alarm mode, light, ON/OFF, holiday
Energy saving pres pres pres
Relay outputs
Compressor 8A 8A 8A
Defrost 20A 20A 20A
Fans 8A 8A
Light 16A 16A 16A
Alarm
AUX 8A
Other
Hot Key/Prog Tool Kit output pres pres pres
Remote display output X-REP X-REP X-REP
Serial output TTL, RS485 opt TTL, RS485 opt TTL, RS485 opt
4÷20mA/0÷10V output
PWM output
Valve driver output
Buzzer on keyboard on keyboard on keyboard
Real time clock opt opt opt
Connection kit

XM440K XM460K XM470K

MULTIPLEXED CABINET REFRIGERATION CONTROLLERS 39

 CONTROLLERS for VENTILATED MULTIPLEXED
XM600 APPLICATIONS with EEV MANAGEMENT

XM660K Digital controller for NT and LT ventilated applications with high performance defrost

Digital controller for NT and LT ventilated applications with high performance defrost and stepper
XM668D electronic valve management

Digital controller for NT and LT ventilated applications with high performance defrost and ON/OFF
XM669K electronic valve management
K: OS/8 DIN Rail D: 8 DIN Rail

FEATURES XM660K XM668D XM669K

Display: n° digits on keyboard ± 3 d.p. on keyboard ± 3 d.p. on keyboard ± 3 d.p.
Keyboard: push buttons 6 (on CX660, T660T) 6 (on CX660, T660T) 6 (on CX660, T660T)
Power supply 110, 230Vac 24Vac 110, 230Vac
Probe inputs
Thermostat NTC, Pt1000 NTC, Pt1000 NTC, Pt1000
Defrost NTC, Pt1000 NTC, Pt1000 NTC, Pt1000
Display NTC, Pt1000 NTC, Pt1000 NTC, Pt1000
AUX NTC, Pt1000 NTC, Pt1000 NTC, Pt1000
Suction pressure NTC, Pt1000, 4÷20mA, 0÷5V NTC, Pt1000, 4÷20mA, 0÷5V
Condensing pressure NTC, Pt1000 NTC, Pt1000
Digital inputs
Start defrost, pressure switch, AUX,
generic alarm, serious alarm mode, 2 x config 3 x config 2 x config
light, ON/OFF, holiday
Energy saving
Relay outputs
Compressor/Valve 8A 8A 8A
Defrost 16A 16A 16A
Fans 8A 8A 8A
Light 16A 16A 16A
Alarm
AUX
Other
Hot Key/Prog Tool Kit output pres pres pres
Remote display output X-REP X-REP X-REP
Serial output RS485 opt RS485 opt RS485 opt
4÷20mA/0÷10V output opt opt opt
PWM output opt opt opt
Valve driver output stepper ON/OFF up to 30W
Buzzer on keyboard on keyboard on keyboard
Real time clock pres pres pres
Connection kit XM-FC16 XM-FC26 XM-FC21

XM660K XM668D

XM669K

40 MULTIPLEXED CABINET REFRIGERATION CONTROLLERS

CONTROLLERS for VENTILATED MULTIPLEXED
APPLICATIONS with EEV MANAGEMENT XM600
Digital controller for NT and LT ventilated applications with high performance defrost and auxiliary
XM670K and alarm outputs

Digital controller for NT and LT ventilated applications with high performance defrost, stepper
XM678D electronic valve management and auxiliary and alarm outputs

Digital controller for NT and LT ventilated applications with high performance defrost, ON/OFF
XM679K electronic valve management and auxiliary and alarm outputs K: OS/8 DIN Rail D: 8 DIN Rail

FEATURES XM670K XM678D XM679K

Display: n° digits on keyboard ± 3 d.p. on keyboard ± 3 d.p. on keyboard ± 3 d.p.
Keyboard: push buttons 6 (on CX660, T660T) 6 (on CX660, T660T) 6 (on CX660, T660T)
Power supply 110, 230Vac 24Vac 110, 230Vac
Probe inputs
Thermostat NTC, Pt1000 NTC, Pt1000 NTC, Pt1000
Defrost NTC, Pt1000 NTC, Pt1000 NTC, Pt1000
Display NTC, Pt1000 NTC, Pt1000 NTC, Pt1000
AUX NTC, Pt1000 NTC, Pt1000 NTC, Pt1000
Suction pressure NTC, Pt1000, 4÷20mA, 0÷5V NTC, Pt1000, 4÷20mA, 0÷5V
Condensing pressure NTC, Pt1000 NTC, Pt1000
Digital inputs
Start defrost, pressure switch, AUX,
generic alarm, serious alarm mode, 3 x config 3 x config 3 x config
light, ON/OFF, holiday
Energy saving
Relay outputs
Compressor/Valve 5A 5A 5A
Defrost 16A 16A 16A
Fans 8A 8A 8A
Light 16A 16A 16A
Alarm 8A 8A 8A
AUX 8A 8A 8A
Other
Hot Key/Prog Tool Kit output pres pres pres
Remote display output X-REP X-REP X-REP
Serial output RS485 opt RS485 opt RS485 opt
4÷20mA/0÷10V output opt opt opt
PWM output opt opt opt
Valve driver output stepper ON/OFF up to 30W
Buzzer on keyboard on keyboard on keyboard
Real time clock pres pres pres
Connection kit XM-FC16 XM-FC26 XM-FC21

XM670K XM678D

XM679K

MULTIPLEXED CABINET REFRIGERATION CONTROLLERS 41

XM400/600 KEYBOARDS for CONTROLLERS in K FORMAT
CX640 6 key keyboard (32x74mm) for XM400 controllers

T640 6 key keyboard (horizontal WING) for XM400 controllers

V640 6 key keyboard (vertical WING) for XM400 controllers

32x74mm 38x185mm
CX660 6 key keyboard (32x74mm) for XM600 controllers

T660T 6 key keyboard for XM600 controllers with TOUCH interface and red, white or blue display

T840 8 key keyboard (horizontal WING) for XM400 controllers

38x185mm 100x64mm
V840 8 key keyboard (vertical WING) for XM400 controllers

FEATURES CX640 T640 V640 CX660 T660T T840 V840

Display: n° digits ± 3 d.p. ± 3 d.p. ± 3 d.p. ± 3 d.p. ± 3 d.p. ± 3 d.p. ± 3 d.p.
Keyboard: push buttons 6 6 6 6 6 8 8
Power supply from controller from controller from controller from controller from controller from controller from controller
XM660K XM660K
XM668D XM668D
XM440K XM440K XM440K XM669K XM669K
Slave module XM470K XM470K
XM460K XM460K XM460K XM670K XM670K
XM678D XM678D
XM679K XM679K
Buzzer opt opt opt opt pres opt opt

CX and TOUCH keyboards are provided with a wide display with integrated icons of real time situation and of measurement unit, for clear and continuous
monitoring.

The POWER MODULES in K FORMAT are AVAILABLE in 3 DIFFERENT VERSIONS

OS: open board for XM400 and XM600 GS: standard plastic case for XM400 8 DIN Rail: with plastic housing for XM600

ACCESSORIES
XM-RTC XM-FC16
Real time clock standard board for XM400 Female connector kit 16 pins for XM660K and XM670K
XM-FC21
Female connector kit 21 pins for XM669K and XM679K
XM-FC26
Female connector kit 26 pins for XM668D and XM678D

42 MULTIPLEXED CABINET REFRIGERATION CONTROLLERS

ELECTRONIC EXPANSION VALVE DRIVERS
SECTION INDEX
FUNCTIONS MODELS

XEV – superheat regulation 43

Drivers for ON/OFF expansion valve management XEV11D – XEV12D 46
Drivers for stepper electronic expansion valve management XEV21D – XEV22D 46
Driver for electronic expansion valve management
with sub-cooling management XEV32D 46
Keyboard for XEV11D and XEV21D controllers KB1 PRG 46
Accessory CAB/KB11 46

ELECTRONIC EXPANSION VALVE DRIVERS 43

 100x64mm

D: 4 DIN Rail

XEV SERIES: SUPERHEAT REGULATION

• Drivers for ON/OFF (pulsed) and stepper electronic expansion valve management
• ON/OFF (pulsed) expansion valve support with 30W max power and coil c.a.
• Temperature analog inputs (NTC, PTC, Pt1000)
• Pressure analog inputs (0÷5V, 4÷20mA)
• Possibility to broadcast via LAN the pressure signal to multiplexed cabinets
• Alarm management (visual, relay)
• Cool Defrost for defrost time reduction
• Superheat adaptive control
• Sub-cooling management (XEV32D)
• Hot Key or Prog Tool Kit connector for quick and easy programming
• Serial connection to monitoring systems
• 20VA max power absorption
• Display with red LED (10,5mm high) and icons

HOW to ORDER

XEV11/12D X E V 1 D - A B C D E

XEV21/22/32D X E V D - 1 B C D 0

A B C D E
Power supply Temperature probe Pressure probe Measurement unit Buzzer
2 = 24Vac P = Pt1000 0 = 0÷5V C = °C/Bar 0 = No
4 = 110Vac N = NTC 1 = 4÷20mA F = °F/PSI 1 = Yes
5 = 230Vac 2 = PP11
3 = PP30
4 = PPR15
5 = PPR30

44 ELECTRONIC EXPANSION VALVE DRIVERS

SUB-COOLING
During the refrigeration cycle shown in the following diagram,
the temperature of the liquid refrigerant entering by the
thermostatic valve is important. Decreasing this value results in
many economic advantages because it increases the “refrigerating
effect” (h2-h1). For this reason it’s important to introduce the
concept of sub-cooling of the refrigerating fluid as “saturated
liquid”. This process, if properly managed, can improve LT plant
operation (also more than 25%), against a meagre power of the
NT compressor rack (about 8%) and an appropriate exchanger.
The XEV32D driver, thanks to special algorithms, ensures the sub-
cooling optimization, which increases the plant COP (Coefficient
Of Performance). Screens show as, with the same compressor, the sub-
cooling management increase the refrigeration power (COP increasing).
For this reason it’s possible to consider the use of a smaller compressor
(less absorbed power).

pressure
bar

liquid
subcooling
condensation
on
expansion

ssi
pre
com

evaporation
XEV32D Pressure-enthalpy diagram shows the refrigeration cycle and the sub-cooling
h zone.
Kj/Kg

REFRIGERATION CIRCUIT
The diagram shows the different ways to connect the XEV drivers to a generic application like a single cooling unit or multiplexed cabinet. The valve is
driven by the XEV module that is in turn commanded, by the activation of the digital input, from the temperature controller.
SINGLE SYSTEM: section 1 of the schematic diagram shows how connections would be arranged for a single cooling system.
MULTIPLEXED CABINET: to reduce installation costs, it is possible to use a single suction pressure transducer as shown in the overall schematic
diagram. This transducer’s pressure signal is repeated to the other controllers across a digital LAN connection that guarantees optimal noise immunity.

DI
Pb2
pressure
evaporator 1 LAN Pb1 LAN Pb2 V
temperature pressure valve
probe trasducer
DI
Pb2 Pb1 power
V RS485 relay supply
defrost
temperature valve
heater
controller
XEV

Pb3 Pb4

Pb2 condenser
pressure
evaporator 2
LAN
DI
Pb1
defrost V
temperature valve
heater
controller
XEV

Pb3 Pb4
compressor n compressor 2 compressor 1
Pb2
pressure
evaporator n LAN
DI
Pb1
defrost V
temperature valve
heater
controller
XEV
liquid separator

Pb3 Pb4

ELECTRONIC EXPANSION VALVE DRIVERS 45

 KEYBOARD and DRIVERS for ON/OFF and STEPPER
XEV ELECTRONIC EXPANSION VALVE MANAGEMENT
XEV11D ON/OFF electronic expansion valve driver

XEV12D ON/OFF electronic expansion valve driver with integrated display

XEV21D Stepper electronic expansion valve driver

XEV22D Stepper electronic expansion valve driver with integrated display

Stepper electronic expansion valve driver with integrated display and sub-cooling
XEV32D management
D: 4 DIN Rail 100x64mm
KB1 PRG Programming keyboard for XEV11D and XEV21D modules

FEATURES XEV11D XEV12D XEV21D XEV22D XEV32D KB1 PRG

Display: n° digits ± 3 d.p. ± 3 d.p. ± 3 d.p. ± 3 d.p.
Keyboard: push buttons 3 3 3 6
Power supply 24, 110, 230Vac 24, 110, 230Vac 24Vac/dc 24Vac/dc 24Vac/dc from controller
Probe inputs
Suction pressure 4÷20mA, 0÷5V 4÷20mA, 0÷5V 4÷20mA, 0÷5V 4÷20mA, 0÷5V 4÷20mA, 0÷5V
Suction temperature NTC, Pt1000 NTC, Pt1000 NTC, Pt1000 NTC, Pt1000 NTC, Pt1000
Output liquid temperature NTC, Pt1000
Digital inputs
Free of voltage pres pres pres pres pres
High voltage pres pres pres pres pres
Relay outputs
Alarm 8A config 8A config 8A config 8A config 8A config
Other
Valve driver output ON/OFF up to 30W ON/OFF up to 30W stepper stepper stepper
Hot Key/Prog Tool Kit output pres pres pres pres pres
Remote keyboard output KB1 PRG KB1 PRG
Serial output RS485 RS485 RS485 RS485 RS485
Alarm recovery by LAN pres pres pres pres pres
Buzzer opt opt
Battery backup input pres pres pres

XEV11D - XEV12D XEV21D - XEV22D XEV32D

ACCESSORY
CAB/KB11
Cable for the connection
between the keyboard
and the XEV driver, 1m

46 ELECTRONIC EXPANSION VALVE DRIVERS

ROOM CONTROLLERS
SECTION INDEX
FUNCTIONS MODELS

XLR100 COOL MATE – NT and LT applications 48

Controller for NT refrigerated rooms XLR130 49
Controller for NT and LT refrigerated rooms XLR170 49

XLR400 COOL MATE – NT and LT applications with dual temperature management 50

Controller with dual temperature management
for NT and LT refrigerated rooms XLR460 51
Controller with dual temperature management
for LT refrigerated rooms XLR470 51

XLH200/300 COOL MATE – NT and LT applications and maturing rooms

with temperature/humidity management 52
Controller for NT and LT refrigerated rooms
with temperature and humidity management XLH260 53
Controller for maturing rooms with temperature
and humidity management XLH360 53

V-KIT – NT and LT applications – split format 54

Wall adapter for WING vertical keyboards V-KIT 54

ROOM CONTROLLERS 47
 PANEL
MOUNTING
WALL
MOUNTING

230x210mm

XLR100 COOL MATE SERIES: NT and LT APPLICATIONS

• Advanced multifunction refrigeration controllers suitable for both heating and cooling applications
• Temperature control can be performed on probe 1, probe 2 or by the difference between probe 1 and 2
• Complete compressor and defrost management
• Maximum and minimum temperature recording
• Direct line power supply 230 (110)Vac. No external transformer required
• Instant visibility of machine status via display icons
• Clear alarm signals thanks to the front lid
• Fast and easy wiring
• Designed to be wall or panel mounted
• Hot Key or Prog Tool Kit connector for quick and easy programming
• Serial connection to monitoring systems
• 10VA max power absorption
• Display with red LED (30,5mm high) and 11 icons

HOW to ORDER

XLR100 X L R 1 0 - A B C D E For blue display please contact Dixell

A B C D E
Power supply Inputs/kind of output RTC Measurement unit RS485 output
2 = 24Vac N = NTC/standard 1 = No C = °C 2 = No
4 = 110Vac P = PTC/standard 3 = Yes F = °F 3 = Yes
5 = 230Vac O = NTC/direct loads
Q = PTC/direct loads

48 ROOM CONTROLLERS
CONTROLLERS for NT and LT COLD ROOMS XLR100

XLR130 “off cycle” defrost digital controller for NT

XLR170 Digital controller for NT and LT ventilated applications

230x210mm

FEATURES XLR130 XLR170

Display: n° digits ± 3 d.p. ± 3 d.p.
Keyboard: push buttons 8 8
Power supply 24, 110, 230Vac 24, 110, 230Vac
Probe inputs
Thermostat NTC, PTC NTC, PTC
Defrost NTC, PTC
Display NTC, PTC NTC, PTC
Digital inputs
Alarm, block alarm, pressure switch, start
defrost, energy saving, ON/OFF, AUX, config config
holiday
Door switch pres pres
Relay outputs
Compressor 20A 20A
Defrost 16A
Fans 8A
Light 16A 16A
AUX 20A 20A
Alarm 8A 8A
Other
Hot Key/Prog Tool Kit output pres pres
Serial output RS485 opt RS485 opt
Buzzer pres pres
Real time clock opt opt

XLR130 XLR170

XLR130 direct loads XLR170 direct loads

ROOM CONTROLLERS 49
 PANEL
MOUNTING
WALL
MOUNTING

230x210mm

XLR400 COOL MATE SERIES: NT and LT APPLICATIONS with

DUAL TEMPERATURE MANAGEMENT

• Advanced multifunction refrigeration controllers with dual temperature management

• Ideal for heating-cooling applications such as a heated bain-marie counter with refrigerated under-counter storage
• Designed for a dual refrigeration circuit or 2 independent circuits
• Integrated defrost management
• Cooling or heating action selectable by user
• Direct line power supply 230 (110)Vac. No external transformer required
• Instant visibility of machine status via display icons
• Fast and easy wiring
• Designed to be wall or panel mounted
• Hot Key or Prog Tool Kit connector for quick and easy programming
• Serial connection to monitoring systems
• 10VA max power absorption
• Dual display with red LED (25,3mm high) and yellow LED (20,3mm high) and 13 icons

TYPICAL APPLICATIONS

1 circuit – 2 evaporators 2 indipendent circuits Heating and cooling application 2 heating applications

HOW to ORDER

XLR400 X L R 4 0 - A 0 C D E

A C D E
Power supply RTC Measurement unit RS485 output
2 = 24Vac 0 = No C = °C 0 = No
4 = 110Vac 1 = Yes F = °F 1 = Yes
5 = 230Vac

50 ROOM CONTROLLERS
CONTROLLERS with DUAL TEMPERATURE MANAGEMENT
for NT and LT COLD ROOMS XLR400

XLR460 Digital controller for NT and LT cold rooms with dual temperature management

XLR470 Digital controller for LT and LT cold rooms with dual temperature management

230x210mm

FEATURES XLR460 XLR470

First display: n° digits ± 3 d.p. ± 3 d.p.
Second display: n° digits ± 4 d.p. ± 4 d.p.
Keyboard: push buttons 8 8
Power supply 24, 110, 230Vac 24, 110, 230Vac
Probe inputs
Thermostat NTC NTC
Thermostat 2 NTC NTC
Defrost NTC NTC
Defrost 2 NTC
Digital inputs
Alarm, block alarm, pressure switch, start
defrost, energy saving, ON/OFF, AUX, config config
holiday
Door switch pres pres
Relay outputs
Compressor 20A 20A
Compressor 2 20A 20A
Defrost 16A 16A
Defrost 2 5A
Fans 8A 5A
Fans 2 5A
Light 16A 16A
Alarm 8A 8A
Other
Hot Key/Prog Tool Kit output pres pres
Serial output RS485 opt RS485 opt
Buzzer pres pres
Real time clock opt opt

XLR460 XLR470

ROOM CONTROLLERS 51
 PANEL
MOUNTING
WALL
MOUNTING

230x210mm

XLH200/300 COOL MATE SERIES: NT and LT APPLICATIONS

and MATURING ROOMS with TEMPERATURE/HUMIDITY MANAGEMENT

• Advanced multifunction controllers with temperature and humidity management

• Cooling and heating action for safe storage of products
• Defrost management
• Possibility of excluding humidity control
• Dehumidifying action by cooling circuit
• Running and stopping programmable cycles with different set points (XLH300)
• Automatic cycles of extraction fans (XLH300)
• Direct line power supply 230 (110)Vac. No external transformer required
• Instant visibility of machine status via display icons
• Fast and easy wiring
• Designed to be wall or panel mounted
• Hot Key or Prog Tool Kit connector for quick and easy programming
• Serial connection to monitoring systems
• 10VA max power absorption
• Dual display with red LED (25,3mm high) and yellow LED (20,3mm high) and 17 icons

HOW to ORDER

XLH200/300 X L H 6 0 - A 0 0 D E

A D E
Power supply Measurement unit RS485 output
2 = 24Vac C = °C 0 = No
4 = 110Vac F = °F 1 = Yes
5 = 230Vac

52 ROOM CONTROLLERS
CONTROLLERS with TEMPERATURE/HUMIDITY MANAGEMENT
for NT and LT COLD ROOMS and MATURING ROOMS XLH200/300

XLH260 Digital controller for NT and LT cold rooms with temperature and humidity management

XLH360 Digital controller for maturing rooms with temperature and humidity management and timed cycles

230x210mm

FEATURES XLH260 XLH360

First display: n° digits ± 3 d.p. ± 3 d.p.
Second display: n° digits ± 4 d.p. ± 4 d.p.
Keyboard: push buttons 6 8
Power supply 24, 110, 230Vac 24, 110, 230Vac
Probe inputs
Thermostat NTC NTC
Defrost NTC NTC
Humidity 4÷20mA 4÷20mA
Digital inputs
Alarm, block alarm, pressure switch, start
defrost, energy saving, ON/OFF, AUX, config config
holiday
Door switch pres pres
Relay outputs
Compressor 20A 20A
Defrost 16A
Defrost, extractor fans 16A config
Fans 8A 8A
Heater control 20A 20A
Humidifying 8A 8A
Dehumidifying, light 16A config 16A config
Other
Hot Key/Prog Tool Kit output pres pres
Serial output RS485 opt RS485 opt
Buzzer pres pres

XLH260 XLH360

ROOM CONTROLLERS 53
 100x64mm

V-KIT: NT and LT APPLICATIONS – SPLIT FORMAT

V-KIT: a wall/panel mounting housing kit for WING vertical keyboards. For remote connection to WING K
controllers.

• Designed for cold rooms applications

• IP55 against water sprinkles
• Easy and quick to install

The Dixell V-KIT allows the user to mount the keyboard near to the cold-room door. Connection between the
power board (eg. XW60K) and the keyboard is via a 2 core cable. The maximum distance possible is 100m.
The door-switch facility is activated when the door is open, the light is automatically switched on, while the
compressor, up to 1.5HP, and the evaporator fan can be simultaneously stopped.

The elegant design of this housing gives a quick and effective solution for a variety of different applications, such
as cold-rooms, benches and industrial environments where it is difficult to mount the keyboard on a wall. It’s
available in white and black colours making it suitable for all applications, even where appearance plays part. A
main feature is ease of assembly and with IP55 protection, it can be used in environments that may be subject to
water spray or rigorous cleaning routines.
The V-KIT is suitable for all vertical format keyboards.
For more information about keyboards and WING modules, please check the information regarding WING
series.

54 ROOM CONTROLLERS
CONTROLLERS for SPECIAL
REFRIGERATED APPLICATIONS
SECTION INDEX
FUNCTIONS MODELS

XRB – bottle cooler applications 56

Controller for static applications XRB04CX 57
Controllers for ventilated applications XRB06CX – XRB07CX 57

XB500 – blast chiller and temperature maintenance applications 58

Blast chiller controller XB570L 59

XH200/300 – NT and LT refrigerated and maturing rooms

applications with temperature/humidity management 60
Controllers and keyboards for NT and LT refrigerated rooms XH240K – TH620 – VH620
XH260L – XH260V 62
Controllers for maturing rooms XH360L – XH360V 63

XR400 – NT and LT applications with dual temperature management 64

Controller for static applications XR420C 65
Controller for ventilated applications XR460C 65

XR700 – NT and LT applications with HACCP function 66

Controller with HACCP function for ventilated applications XR775C 67

XDL – temperature and status recording 68

Temperature and status recording module XDL01 69
Probe and status acquisition module XJDL40D 69
Temperature recording kit XDL01-PW-KIT – XDL01-XJ-KIT
XDL01-XJB-KIT 69
Accessories PW-DL – BA6H – BA24H – XDL-KEY 69

XW700 – pharmaceutical applications 70

Controllers and graphic display for ventilated pharmaceutical
applications XW737K – XW777K – VGW870 71
Accessories XDL-KEY – CAB-USB10 71

XR20/60 & XW20/60/300 – NT and LT refrigerated truck applications 72

Controller for static applications XR20CX – XW20L 73
Controllers for ventilated applications XR60CX – XW60L 73
Controllers and keyboard for ventilated applications
with “on demand” defrost XW360K – XW370K – T630 74

CONTROLLERS for SPECIAL REFRIGERATED APPLICATIONS 55

 CX: 32x74mm

XRB SERIES: BOTTLE COOLER APPLICATIONS

AD
V
EN ANC
• Electronic controllers for bottle cooler SA ERG ED
AL V Y
GO ING
• Easy and intuitive installation IN RIT
SI HM
DE
• High energy saving thanks to load optimization
• Algorithms for energy saving work without the use of external sensors
• Energy saving based on pre-set time interval
• Automatic set point management after filling the cabinet
• Compressor working time control
• Counters of compressor/defrost/fans/light activation time
• Condenser monitor for maintenance management
• Anti-sweat heaters management (only for XRB07CX)
• Firmware update via special Prog Key
• Hot Key or Prog Tool Kit connector for quick and easy programming
• Serial connection to monitoring systems
• 3VA max power absorption For cabinets with or without door
(also with night curtains)
• Display with red LED (10,5mm high) and icons

HOW to ORDER

XRB X R B 0 C X - A N C D E For blue display please contact Dixell

For RTC version please contact Dixell

A C D E
Power supply Buzzer Measurement unit Connections
0 = 12Vac/dc 0 = No C = °C 3 = Screw
4 = 110Vac 1 = Yes F = °F 9 = Disconnectable
5 = 230Vac

56 CONTROLLERS for SPECIAL REFRIGERATED APPLICATIONS

CONTROLLERS for STATIC or VENTILATED BOTTLE COOLER
APPLICATIONS XRB
XRB04CX Digital controller for static applications

XRB06CX Digital controller for ventilated applications

XRB07CX Digital controller for ventilated applications with auxiliary output

CX: 32x74mm

FEATURES XRB04CX XRB06CX XRB07CX

Display: n° digits ± 3 d.p. ± 3 d.p. ± 3 d.p.
12Vac/dc 12Vac/dc
Power supply 110, 230Vac
110, 230Vac 110, 230Vac
Probe inputs
Thermostat NTC NTC NTC
Defrost NTC NTC NTC
Condenser NTC NTC NTC
Condenser/AUX NTC on HOT KEY
Digital inputs
Start defrost, light, AUX, door switch,
config config config
energy saving, probe
Alarm, start defrost, light, AUX, door switch,
config config config
energy saving, fans, ON/OFF
Relay outputs
Compressor 16A 16A 16A
Fans 8A 8A
Light 8A 8A 8A
AUX 5A
Other
Hot Key/Prog Tool Kit output pres pres pres
Serial output TTL TTL TTL
Buzzer opt opt opt

XRB04CX XRB06CX XRB07CX

CONTROLLERS for SPECIAL REFRIGERATED APPLICATIONS 57

 L: 38x185mm

XB500: BLAST CHILLER and TEMPERATURE MAINTENANCE APPLICATIONS

• Blast chiller controllers that comply with the rules concerning preparation and chilling of foodstuffs (HACCP)
• Four configurable cycles pre-set
• Output for remote display to monitor the core temperature of goods
• Printer output (XB07PR) for temperature and blast chiller cycles reports
• All different phases monitorated and shown on the display
• Real time clock
• Hot Key 128 or Prog Tool Kit connector for quick and easy programming
• Serial connection to monitoring systems
• 5VA max power absorption
• Dual display with red LED (8,0mm high) and yellow LED (5,6mm high) and 14 icons

HOW to ORDER

XB500 X B 5 7 0 L - A B C D E For blue display please contact Dixell

A B C D E
Power supply Inputs X-REP Measurement unit Printer output
2 = 24Vac N = NTC 0 = No C = °C 0 = No
4 = 110Vac P = PTC 1 = Yes F = °F 1 = Yes
5 = 230Vac

58 CONTROLLERS for SPECIAL REFRIGERATED APPLICATIONS

BLAST CHILLER CONTROLLER XB500

XB570L Blast chiller controller with four configurable cycles, RTC, printer output and serial output

L: 38x185mm

FEATURES XB570L
First display: n° digits ± 3 d.p.
Second display: n° digits ± 4 d.p.
Power supply 24, 110, 230Vac
Probe inputs
Thermostat NTC, PTC
Defrost NTC, PTC
Insert 1 NTC, PTC
Insert 2 NTC, PTC
Insert 3 NTC, PTC
Digital inputs
Alarm config
Door switch pres
Relay outputs
Compressor 20A
Defrost 8A
Fans 8A
Light 16A
AUX 8A
Alarm 16A
Other
Hot Key 128/Prog Tool Kit output pres
Remote display output X-REP opt
Printer output XB07PR opt
Serial output RS485
Buzzer pres
Real time clock pres

HARD CHILL, SOFT CHILL, FREEZING, HOLDING

The XB570L has 4 different soft and hard chill cycles in it’s memory. These can also be modified by the User.
Each cycle is defined with independent time and temperature parameters to set each control phase and can be combined even with the hold phase. The
four cycles are directly selectable from the keyboard. The control of each cycle is carried out using the insert probe or by time duration.

Temper. PHASE 1: PHASE 2: PHASE 3:

°C HARD CHILL SOFT CHILL FREEZING CYCLE

Time

INSERT PROBE ROOM PROBE

CONTROLLERS for SPECIAL REFRIGERATED APPLICATIONS 59

 K: OS/GS

V: 100x64mm 100x64mm

38x185mm

L: 38x185mm

XH200/300 SERIES: NT and LT REFRIGERATED and MATURING ROOM

APPLICATIONS with TEMPERATURE/HUMIDITY MANAGEMENT

• Electronic controllers with temperature and humidity management

• Cooling and heating action for safe storage of products
• Defrost management
• Possibility of excluding humidity control
• Dehumidifying action by cooling circuit
• Running and stopping programmable cycles with different set points (XH300)
• Automatic cycles of extraction fans (XH300)
• Up to 8 push buttons with direct action for user friendly interface
• Direct line power supply 230 (110)Vac. No external transformer required
• Hot Key or Prog Tool Kit connector for quick and easy programming
• Serial connection to monitoring systems
• 10VA max power absorption
• Dual display with red LED (8,0mm high) and yellow LED (5,6mm high) and 14 icons

HOW to ORDER

KEYBOARDS H 6 2 0 - 0 0 C 0 0 For inox version and blue display on T keyboards please contact Dixell

XH240K X H 2 4 0 K - A 0 0 D 0

XH X H 6 0 - A 0 C D 0 For inox version and blue display on L format please contact Dixell

A C D
Power supply Buzzer Measurement unit
2 = 24Vac 0 = No C = °C - %RH
4 = 110Vac 1 = Yes F = °F - %RH
5 = 230Vac

60 CONTROLLERS for SPECIAL REFRIGERATED APPLICATIONS

 ICON MEANING
Celsius degrees

Fahrenheit degrees

Compressor

Heater control

Alarm

Fans

RH%
COMPLETE
Dehumidifying The dual display and the 14 icons show complete information about
the status of the machine. Without the need to enter into the
Humidifying
programming mode, all the main functioning of the cooling
Temperature and humidity setting system are displayed with only one key touch.

Running cycle (for XH300)

Cycle duration setting (for XH300)

Light

XH200: TEMPERATURE and HUMIDITY CONTROL

A neutral zone algorithm is used both for temperature and Temperature
humidity. Instruments are provided with a compressor
Cooling area
output (with defrost) and heating elements to control
temperature.
Humidifier and dehumidifier (depending on model) outputs Neutral zone
Set
Time
are provided for humidity. This assures both variables are
kept inside the set band (neutral zone)
Heating area

Compressor ON

Heater ON

XH300: EXAMPLE of MATURING CYCLE with RUNNING and STOPPING PHASE

T1: pre-cycle only with temperature control Temperature

Set 1
T2: cycle with temperature and humidity control
Set 2
T3: stopping phase
Time
Humidity
Running Stopping

Set 2
RH

Time

CONTROLLERS for SPECIAL REFRIGERATED APPLICATIONS 61

 CONTROLLER and KEYBOARDS for NT and LT REFRIGERATED
XH200 ROOMS with TEMPERATURE HUMIDITY MANAGEMENT

XH240K Digital controller for NT and LT refrigerated rooms

TH620 Keyboard (horizontal WING) for XH240K controller

VH620 Keyboard (vertical WING) for XH240K controller

K: OS/GS 38x185mm 100x64mm

FEATURES XH240K TH620 VH620

First display: n° digits on keyboard ± 3 d.p. ± 3 d.p. ± 3 d.p.
Second display: n° digits on keyboard ± 4 d.p. ± 4 d.p. ± 4 d.p.
Keyboard: push buttons 6 (on TH620, VH620) 6 6
Power supply 24, 110, 230Vac from controller from controller
Probe inputs
Thermostat NTC
Defrost
Humidity 4÷20mA
Digital inputs
Heater safety, door switch config
Relay outputs
Compressor 20A
Defrost
Defrost, extractor fans
Fans 8A
Heater control 16A
Humidifying 8A
Dehumidifying, light
Other
Hot Key/Prog Tool Kit output pres
Serial output TTL
Buzzer on keyboard opt opt

XH240K

The POWER MODULE in K FORMAT is AVAILABLE in 2 DIFFERENT VERSIONS

OS: open board GS: standard plastic housing 190x140x70mm

62 CONTROLLERS for SPECIAL REFRIGERATED APPLICATIONS

CONTROLLERS for NT and LT REFRIGERATED and MATURING
ROOMS with TEMPERATURE HUMIDITY MANAGEMENT XH200/300
XH260L Digital controllers for NT and LT refrigerated rooms with defrost management
XH260V
XH360L Digital controllers for maturing rooms with running and stopping cycles, timed cycles,
XH360V cooling and heating action and defrost
L: 38x185mm V: 100x64mm

FEATURES XH260L XH260V XH360L XH360V

First display: n° digits ± 3 d.p. ± 3 d.p. ± 3 d.p. ± 3 d.p.
Second display: n° digits ± 4 d.p. ± 4 d.p. ± 4 d.p. ± 4 d.p.
Keyboard: push buttons 6 6 8 8
Power supply 24, 110, 230Vac 24, 110, 230Vac 24, 110, 230Vac 24, 110, 230Vac
Probe inputs
Thermostat NTC NTC NTC NTC
Defrost NTC NTC NTC NTC
Humidity 4÷20mA 4÷20mA 4÷20mA 4÷20mA
Digital inputs
Heater safety, door switch config config config config
Relay outputs
Compressor 20A 8A 20A 8A
Defrost 8A 8A
Defrost, extractor fans 8A 8A
Fans 8A 8A 8A 8A
Heater control 8A 8A 8A 8A
Humidifying 8A 8A 8A 8A
Dehumidifying, light 8A 8A 8A 8A
Other
Hot Key/Prog Tool Kit output pres pres pres pres
Serial output TTL TTL TTL TTL
Buzzer opt opt opt opt

XH260V
XH260L

XH360V
XH360L

CONTROLLERS for SPECIAL REFRIGERATED APPLICATIONS 63

 C: 32x74mm

XR400 SERIES: NT and LT APPLICATIONS with DUAL TEMPERATURE

MANAGEMENT

• Advanced multifunction refrigeration controllers with dual temperature management

• Ideal for heating-cooling applications such as bain-marie with under-counter refrigerated storage
• Designed for a dual refrigeration circuit or 2 independent circuits
• Integrated defrost management
• Cooling or heating action settable by user
• Instant visibility of machine status via display icons
• Hot Key or Prog Tool Kit connector for quick and easy programming
• Serial connection to monitoring systems
• 4VA max power absorption
• Dual display with red LED (8,0mm high) and yellow LED (5,6mm high) and 14 icons

TYPICAL APPLICATIONS
1 circuit – 2 evaporators 2 independent circuits Heating and cooling application 2 heating applications

HOW to ORDER

XR400 X R 4 0 C - A B C D 0

A B C D
Power supply Buzzer RTC Measurement unit
0 = 12Vac/dc 0 = No 0 = No C = °C
1 = 24Vac/dc 1 = Yes 1 = Yes F = °F
2 = 24Vac
4 = 110Vac
5 = 230Vac

64 CONTROLLERS for SPECIAL REFRIGERATED APPLICATIONS

CONTROLLERS for STATIC or VENTILATED APPLICATIONS
with DUAL TEMPERATURE MANAGEMENT XR400

XR420C Digital controller for NT static applications with “off cycle” defrost

XR460C Digital controller for NT and LT for ventilated applications

C: 32x74mm

FEATURES XR420C XR460C

First display: n° digits ± 3 d.p. ± 3 d.p.
Second display: n° digits ± 4 d.p. ± 4 d.p.
Power supply 24, 110, 230Vac 12, 24Vac/dc
Probe inputs
Thermostat NTC/PTC NTC/PTC
Thermostat 2 NTC/PTC NTC/PTC
Defrost NTC/PTC
Digital inputs
Safety, start defrost, door switch config 2 x config
Relay outputs
Compressor 8A 8A
Compressor 2 8A 8A
Defrost 8A
Fans 8A
Light 8A
Other
Hot Key/Prog Tool Kit output pres pres
Serial output TTL TTL
Buzzer opt opt
Real time clock opt opt

XR420C XR460C

CONTROLLERS for SPECIAL REFRIGERATED APPLICATIONS 65

 C: 32x74mm

XR700: NT and LT APPLICATIONS with HACCP FUNCTION

• Digital controller with HACCP function

• Monitoring, signalling and recording of the critical temperature
• Real time display of the peaks and their duration
• Correct storage of products
• Hot Key or Prog Tool Kit connector for quick and easy programming
• Serial connection to monitoring systems
• 4VA max power absorption
• Dual display with red LED (8,0mm high) and yellow LED (5,6mm high) and 13 icons

COMPLETE
The dual display with 13 icons shows complete information about the
status of the machine. Without the need to enter into the programming
mode, all the main functioning of the cooling system is displayed with
only one key touch.

HOW to ORDER

XR700C X R 7 7 5 C - A 0 0 D E

A D E
Power supply Measurement unit RS485 output
0 = 12Vac/dc C = °C 0 = No
1 = 24Vac/dc F = °F 1 = Yes

66 CONTROLLERS for SPECIAL REFRIGERATED APPLICATIONS

CONTROLLER with HACCP FUNCTION for VENTILATED
APPLICATIONS XR700

XR775C Digital controller for NT and LT ventilated applications

C: 32x74mm

FEATURES XR775C
First display: n° digits ± 3 d.p.
Second display: n° digits ± 4 d.p.
Power supply 12, 24Vac/dc
Probe inputs
Thermostat NTC
Defrost NTC
Display NTC
Digital inputs
Alarm, door switch, light, defrost config
Door switch pres
Relay outputs
Compressor 8A
Defrost 8A
Fans 8A
Light, alarm 8A config
Other
Hot Key/Prog Tool Kit output pres
Serial output TTL, RS485 opt
Buzzer pres
Real time clock pres

EXAMPLE of HIGH TEMPERATURE ALARM

When a high (or low) temperature alarm occurs, instrument Temperature
Maximum
records the start ❶ and end time ❷, the date and the temperature

maximum (or minimum) temperature ❸ reached.

HAL
High temperature alarm Safe food
zone

Set
LAL
Low temperature alarm

Alarm Start Max. temp. Alarm Stop Time

time and date time and date time and date

BLACKOUT ALARM
If, after a blackout, the temperature is higher than the Temperature
Maximum temperature
time and date
alarm value, the start of the blackout ❶ and the end of
alarm temperature ❷ together with the max temperature
reached ❸ are recorded. HAL
High temperature alarm Safe food
zone

Set
LAL
Low temperature alarm

BLACK OUT
Time
Black out Start Alarm Stop
time and date time and date

CONTROLLERS for SPECIAL REFRIGERATED APPLICATIONS 67

 45x70mm

D: 4 DIN Rail

XDL: TEMPERATURE and STATUS RECORDING

• Temperature and status recording module for refrigerating applications that works in accordance to HACCP rules
• Connection to Dixell instruments equipped with the serial output or combined with the XJDL40D probe module
• Monitoring of temperature (up to 4), alarms and digital inputs is simple and intuitive
• Stand-alone operation in a 4 DIN module XJDL40D
• Fast and simple mounting
• Recorded data download on a USB driver: txt format that
can also be displayed in EXCEL®
• Data recording: up to 1 year with sampling up to 16 minutes
(settable)
• TTL and RS485 inputs with internal converter
(on PW-DL power supply or XJDL40D)
• Temperature recording kit availables on request with
minimum quantity 20 pieces
• 5VA max power absorption
• Dual display with red LED (8,0mm high) and yellow LED
(5,6mm high) and 17 icons

HOW to ORDER

XDL01 X D L 0 1 - 0 0 0 D 0

XJDL40D X J D L 4 0 D - A B 0 D 0

PW-KIT X D L 0 1 - P W - K I T - A 0 0 D 0

XJ-KIT X D L 0 1 - X J - K I T - A 0 0 D 0

XJB-KIT X D L 0 1 - X J B - K I T - A 0 0 D 0

A B D
Power supply Battery output Measurement unit
2 = 24Vac 0 = No 0 = °C decimal
3 = 9÷40Vdc 1 = Yes (not available with power supply 9÷40Vdc) 1 = °C integer
5 = 230Vac 2 = °F

68 CONTROLLERS for SPECIAL REFRIGERATED APPLICATIONS

TEMPERATURE and STATUS RECORDING MODULE XDL
Temperature and status recording module (with cable CAB/RS1, 1m included) that
XDL01 works with Dixell instruments equipped with the serial output (via PW-DL) or
combined with the XJDL40D probe module

Probe and status acquisition module for XDL01 with external battery input and
XJDL40D female connector included
45x70mm D: 4 DIN Rail

FEATURES XDL01 XJDL40D TEMPERATURE RECORDING

KIT
First display: n° digits ± 3 d.p.
Second display: n° digits ± 4 d.p.
Power supply from PW-DL o XJDL40D 24, 230Vac, 9÷40Vdc XDL01-PW-KIT
Probe inputs Kit composed of XDL01, PW-DL and
Temperature 1 NTC/Pt1000 XDL-KEY
Temperature 2 NTC/Pt1000
Temperature 3 NTC/Pt1000
XDL01-XJ-KIT
Temperature 4 NTC/Pt1000/4÷20mA
Digital inputs Kit composed of: XDL01, XJDL40D,
XDL-KEY and 2 NG6 probes, 3m
External alarm, defrost 4 x config
Relay outputs
Alarm 8A XDL01-XJB-KIT
Other
Kit composed of: XDL01, XJDL40D,
Hot Key/Prog Tool Kit output pres BA6H, XDL-KEY and 2 NG6 probes,
USB output pres 3m
Serial output TTL TTL
Battery backup internal 48h external (6 or 24h) opt
Real time clock pres

XDL01 - PW-DL XDL01 – XJDL40D

The XDL01 data recording module is connected to the PW-DL power supply The XDL01 data recording module is directly connected to the XJDL40D
and is also an interface with Dixell instruments with TTL or RS485 serial probe module
output

ACCESSORIES
PW-DL BA6H
Power supplier (24, 230Vac) for XDL01 module Battery for XJDL40D of 1.2Ah, 6 hours of backup
(with CAB/DL2 cable, 2m included) works as a
gateway between the XDL01 and Dixell instruments
equipped with TTL or RS485 serial output
How to order: PW-DL-20000 (for 24Vac)
PW-DL-50000 (for 230Vac)

XDL-KEY BA24H
USB pendrive for XDL01 Battery for XJDL40D of 4.0Ah, 24 hours of backup

CONTROLLERS for SPECIAL REFRIGERATED APPLICATIONS 69

 K: 8 DIN Rail

VG: 82x156mm

XW700 SERIES: PHARMACEUTICAL APPLICATIONS

• Digital controllers for pharmaceutical cabinets

• Also ideal for applications up to -100°C
• Temperature, alarms and load status recording
• LCD graphic interface (or Touch Screen on request) with panel or wall mounting
• Last 24 hours temperature graphic display
• Battery backup in case of power supply failure
• Data download on USB pendrive: txt format compatible with EXCEL®
• Data recording: up to 1 year with sampling every 15 minutes
• Programmable sampling time from 3 to 60 minutes
• Hot Key or Prog Tool Kit connector for quick and easy programming
• Serial connection to monitoring systems
• 10VA max power absorption

HOW to ORDER

XW700 X W 7 7 K - A B 0 D 0

A B D
Power supply Inputs Light relay Measurement unit
4 = 110Vac N = NTC 16A C = °C
5 = 230Vac L = NTC 16A neon F = °F
S = Pt1000 16A
T = Pt1000 16A neon

For TOUCH SCREEN interface please contact Dixell

VGW870 V G W 8 7 0 - 1 B 0 0 0 More information on TGIPG family on page 118

B
Kind of mounting
P = Panel
W = Wall

70 CONTROLLERS for SPECIAL REFRIGERATED APPLICATIONS

CONTROLLERS and GRAPHIC DISPLAY for VENTILATED
PHARMACEUTICAL APPLICATIONS XW700
XW737K Digital controller for ventilated pharmaceutical applications

Digital controller for ventilated pharmaceutical applications with defrost and auxiliary relay
XW777K management

Remote keyboard with LCD graphic display and dedicated interface for medical applications
VGW870 for XW700 controllers (IP65 front protection) K: 8 DIN Rail VG: 82x156mm

FEATURES XW737K XW777K VGW870

Display LCD on VGW870 LCD on VGW870 LCD - 240x96pixels
Power supply 110, 230Vac 110, 230Vac from controller
Probe inputs
Thermostat NTC, Pt1000 NTC, Pt1000
Defrost NTC, Pt1000 NTC, Pt1000
Product 1 NTC, Pt1000 NTC, Pt1000
Product 2 NTC, Pt1000 NTC, Pt1000
Digital inputs
Alarm, start defrost, door switch,
2 x config 2 x config
pressure switch
Relay outputs
Compressor 20A 20A
Defrost 8A
Fans 8A 8A
Light 16A 16A
Alarm 8A 8A
AUX 8A
Other
Hot Key/Prog Tool Kit output pres pres
Visokey output pres
USB output pres pres
Serial output TTL TTL
Buzzer on keyboard on keyboard pres
Real time clock with battery with battery
Backup battery input pres pres

XW737K XW777K

16A 16A 16A 16A

ACCESSORIES
XDL-KEY CAB-USB10
USB pendrive for XW700 controllers USB extended cable, 1m with plastic cap

CONTROLLERS for SPECIAL REFRIGERATED APPLICATIONS 71

 38x185mm

K: OS/GS

L: 38x185mm

CX: 32x74mm

XR20/60 & XW20/60/300: NT and LT REFRIGERATED

TRUCKS APPLICATIONS

• Digital controllers designed for refrigerated trucks (9÷40Vdc power supply)

• Maximum and minimum temperature recording/visualisation
• Possibility of controlling one LT and one NT compartment or one refrigerated and one heated compartment (XW300)
• “On demand” defrost for optimum defrost cycles management (XW300)
• Service hours count for system maintenance cycles (XW300)
• Thermostatic command for shutter opening (XW300)
• Hot Key or Prog Tool Kit connector for quick and easy programming
• Serial connection to monitoring systems
• 3VA max power absorption (10VA max for XW300)
• Display with red LED, 13,2mm high (red LED, 10,5mm high and icons for CX format)

HOW to ORDER

XR20/60 X R 0 C X - 3 B C D E For blue display please contact Dixell

B C D E
Inputs Buzzer X-REP output (excludes TTL output) Measurement unit Connections
N = NTC 0 = No No C = °C 0 = Screw
P = PTC 1 = Yes No F = °F 6 = Faston
2 = No Yes
3 = Yes Yes

XW20/60 X W L - 3 B C D 0 For blue display please contact Dixell

B C D
Inputs Buzzer Measurement unit
N = NTC 0 = No C = °C
P = PTC 1 = Yes F = °F

KEYBOARD T 6 3 0 - A 0 0 D 0 For blue display please contact Dixell

XW300 X W 3 0 K - 3 N C D E

A C D E
Buzzer Housing Measurement unit Built-in RS485 4÷20mA
0 = No 0 = Open board “OS” C = °C 0 = No No
1 = Yes 2 = “GS” housing 182x142x76mm F = °F 2 = No Yes
4 = “GS” housing 225x180x84mm 4 = Yes No
6 = Yes Yes

72 CONTROLLERS for SPECIAL REFRIGERATED APPLICATIONS

CONTROLLERS for STATIC and VENTILATED
APPLICATIONS on REFRIGERATED TRUCKS XR20/60 & XW20/60
XR20CX Digital controllers for NT static applications with “off cycle” defrost
XW20L
XR60CX Digital controllers for NT and LT ventilated applications with defrost management
XW60L CX: 32x74mm L: 38x185mm

FEATURES XR20CX XW20L XR60CX XW60L

Display: n° digits ± 3 d.p. ± 3 d.p. ± 3 d.p. ± 3 d.p.
Power supply 9÷40Vdc 9÷40Vdc 9÷40Vdc 9÷40Vdc
Probe inputs
Thermostat NTC, PTC NTC, PTC NTC, PTC NTC, PTC
Defrost NTC, PTC NTC, PTC
Condenser NTC, PTC on HOT KEY NTC, PTC on HOT KEY
Digital inputs
Alarm, start defrost, door switch,
config config config config
pressure switch
Relay outputs
Compressor 8A 8A 8A 8A
Defrost 8A 8A
Fans 8A 8A
Light 8A 8A
Other
Hot Key/Prog Tool Kit output pres pres pres pres
Remote display output X-REP opt X-REP opt
Serial output TTL TTL
Buzzer opt opt opt opt

XR20CX XW20L

XR60CX XW60L

CONTROLLERS for SPECIAL REFRIGERATED APPLICATIONS 73

 CONTROLLERS and KEYBOARD for VENTILATED APPLICATIONS
XW300 with “on DEMAND” DEFROST on REFRIGERATED TRUCKS

XW360K Digital controller with NT and LT ventilated applications with “on demand” defrost

Digital controller with NT and LT ventilated applications with “on demand” defrost,
XW370K heater and shutter management
K: OS/GS 38x185mm
T630 Keyboard for XW300 controllers

FEATURES XW360K XW370K T630

Display: n° digits on keyboard ± 3 d.p. on keyboard ± 3 d.p. ± 3 d.p.
Power supply 9÷40Vdc 9÷40Vdc from controller
Probe inputs
Thermostat NTC NTC
NT thermostat NTC
Defrost NTC NTC
“on demand” defrost NTC NTC
Digital inputs
Generic alarm, block alarm,
pressure switch, start defrost, config config
change working mode, heater output
Door switch pres pres
Relay outputs
Compressor 8A 8A
Defrost 8A 8A
Fans 8A 8A
Heater control 8A
Light 8A 8A
Shutter 8A
Other
Hot Key/Prog Tool Kit output pres pres
Serial output RS485 opt RS485 opt
Analog output 4÷20mA opt 4÷20mA opt
Buzzer on keyboard on keyboard opt

XW360K XW370K

The POWER MODULES in K FORMAT are AVAILABLE in 2 DIFFERENT VERSIONS

OS: open board GS: with plastic housing 182x142x76mm or 225x180x84mm

74 CONTROLLERS for SPECIAL REFRIGERATED APPLICATIONS

COMPRESSOR RACK REFRIGERATION
CONTROLLERS
SECTION INDEX
FUNCTIONS MODELS

XEV02 – Digital™ compressor applications 76

Driver slave for Digital™ compressor management XEV02D 77
XC10/30 – condensing unit applications 78
Condensing unit controller XC10CX 79
Condensing unit controller with fans management XC30CX 79
Accessory CAB/HK 79
XC400/600 – up to 6 compressor/fan output applications
also with inverter management 80
Controller for managing up to 4 compressors/fans XC640D 82
Controllers for managing up to 5 compressors/fans XC450CX – XC650CX – XC652CX 82
Controllers with DigitalTM compressor management XC645CX – XC645D 82
Controller for managing up to 6 compressors/fans XC660D 83
Keyboard for controllers in D format VC660 83
XC1000 – up to 15 compressor/fan output applications 84
Controller for simultaneous management of up to
8 compressors and fans XC1008D 88
Controller for simultaneous management of up to
11 compressors and fans XC1011D 88
Controller for simultaneous management of up to
15 compressors and fans XC1015D 89
Graphic display for XC1000 controllers VGC810 89
iProRACK – up to 2 circuit and 6 compressor per circuit applications 90
Controllers for management of up to 2 circuits
and 6 compressors per circuit IPR208D – IPR215D 92
Graphic display for iProRACK controllers VGIPG 92

COMPRESSOR RACK REFRIGERATION CONTROLLERS 75

 D: 4 DIN Rail

XEV02: DIGITAL™ COMPRESSOR APPLICATIONS

• Driver slave for DigitalTM compressor management

• Compatible with XC400/600, XC1000 and iProRACK controllers
• Optimal management of “Demand Cooling” applications
• Last 10 alarms recording (kind, duration)
• Temperature analog inputs (NTC86K, Pt1000)
• Pressure analog inputs (0÷5V, 4÷20mA)
• Alarm management (visual or through digital output)
• Digital inputs (1 insulated, 1 voltage)
• Hot Key or Prog Tool Kit connector for quick and easy programming
• Serial connection to monitoring systems
• 6VA max power absorption
• Display with red LED (10,5mm high) and icons

HOW to ORDER

XEV02D X E V 0 2 D - A B C D 0

A B C D
Power supply Temperature probe Pressure probe Measurement unit
2 = 24Vac N = NTC86K 0 = No B = Bar/°C
4 = 110Vac P = Pt1000 1 = 0÷5V P = PSI/°F
5 = 230Vac 2 = 4÷20mA H = KPA/°C
3 = PP11
4 = PP30
5 = PPR15
6 = PPR30

76 COMPRESSOR RACK REFRIGERATION CONTROLLERS

DRIVER SLAVE for DIGITAL™ COMPRESSOR MANAGEMENT XEV02

XEV02D Driver slave for Digital™ compressor management with triac and open collector outputs

D: 4 DIN Rail

FEATURES XEV02D
Display: n° digits ± 3 d.p.
Keyboard: push buttons 4
Power supply 24, 110, 230Vac
Probe inputs
Suction pressure 4÷20mA, 0÷5V
Discharge line temperature (DLT) NTC86K, Pt1000
Digital inputs
Free of voltage pres
High voltage pres
Relay outputs
Alarm 8A config
Other
Triac output pres
Open collector output config
Hot Key/Prog Tool Kit output pres
Serial output RS485
Buzzer pres

COMPATIBILITY with DIXELL CONTROLLERS

MASTER

DIGITALTM
COMPRESSORS
4÷20
mA, 0
÷10V
SLAVE

XC400/600 & XC1000

÷10V
mA, 0
4÷20 XEV02D

US
ModB

iProRACK

COMPRESSOR RACK REFRIGERATION CONTROLLERS 77

 CX: 32x74mm

XC10/30 SERIES: CONDENSING UNIT APPLICATIONS

• Electronic controllers for condensing unit management with alarm log

• Smart error pressure probe management
• External trigger signal to enable regulation (fig. 1)
• Flooded start protection
• Suction and discharging lines temperature control
• Compressor working time and activation counters
• Safety control of high pressure and high condensing/suction temperature
• Fan cycling management to share the working load
• Direct access to alarm menu, working time and load activation
• Management of 1 compressor and up to 2 fans (XC30CX)
• Hot Key or Prog Tool Kit connector for quick and easy programming Fans relay
• 3VA max power absorption fig. 1
• Display with red LED (10,5mm high) and icons

Compressor
relay

XC30CX
Digital input from thermostat

HOW to ORDER

XC10/30 X C 0 C X - A B C 0 E

A B C E
Power supply Measurement unit Buzzer Input
4 = 110Vac B = Bar/°C 0 = No G = 0÷5V (suction)/NTC (condensing)
5 = 230Vac P = PSI/°F 1 = Yes H = 0÷5V (suction)/0÷5V (condensing)
H = KPA/°C

78 COMPRESSOR RACK REFRIGERATION CONTROLLERS

CONDENSING UNIT CONTROLLERS XC10/30

XC10CX Condensing unit controller with 1 compressor

XC30CX Condensing unit controller with 1 compressor and 2 fans

CX: 32x74mm

FEATURES XC10CX XC30CX

Display: n° digits ± 3 d.p. ± 3 d.p.
Power supply 110, 230Vac 110, 230Vac
Probe inputs
Suction pressure 0÷5V 0÷5V
Condensing pressure 0÷5V, NTC 0÷5V, NTC
Discharge temperature PTC PTC
Digital inputs
High pressure safety pres pres
Thermostat pres pres
Relay outputs
Compressor 20A 20A
Fans 8A
Fans 2 5A
Other
Hot Key/Prog Tool Kit output pres pres
Buzzer opt opt

XC10CX XC30CX

Sf2+hf2
FAN MANAGEMENT
Sf2
XC30CX has 2 outputs to drive 2 different condensing fans. A smart Sf1+hf1
Sf1
fan algorithm shares the fan working time between the outputs

Fan 1

Fan 2
Parameters: Sf1 (set point Fan1), Sf2 (set point Fan2)
hf1 (differential Fan1), hf2 (differential Fan2)

ACCESSORY

CAB/HK
Adapter cable, 5 pins for Hot Key input, 0,5m

COMPRESSOR RACK REFRIGERATION CONTROLLERS 79

 100x64mm
CX: 32x74mm
D: 4 DIN Rail

XC400/600 SERIES: up to 6 COMPRESSOR/FAN OUTPUT

APPLICATIONS also with INVERTER MANAGEMENT

• Electronic controllers for compact compressor racks management also with inverter
• Compressor types: DigitalTM, multi-stages, differing power, semi-hermetic, scroll and screw
• Proportional band or neutral zone control
• Floating condensing pressure control depending on the external temperature
• High configurability and flexibility
• Automatic switch-off of the compressors in case of high condensing pressure/temperature
• Silent mode function for fans during the night
• Correct lubrication automatic restore cycle
• Safer control with low pressure electronic pressure switch
• Type of gas setting: to control temperature or pressure
• Hot Key or Prog Tool Kit connector for quick and easy programming
• Serial connection to monitoring systems
• 5VA max power absorption
• Dual display with red LED (8,5mm high) and yellow LED (7,5mm high) and 17 icons

HOW to ORDER

XC400/600CX X C C X - A B C D E

XC600D X 6 D - A B 1 D E

VC660 V C 6 6 0 - 0 0 C 0 0

A B C D E
Power supply* Measurement unit Buzzer TRIAC voltage** Analog outputs Input
0 = 12Vac/dc C = °C 0 = No 0 = 110÷230Vac No A = PP11 (only for XC450CX)
1 = 24Vac/dc F = °F 1 = Yes 1 = 110÷230Vac Yes B = PP30 (only for XC450CX)
4 = 110Vac B = Bar 2 = 24Vac No C = NTC
5 = 230Vac P = PSI 3 = 24Vac Yes E = 4÷20mA
H = KPA 4 = No TRIAC No F = PP11 (suction)/PP30 (discharge)
5 = No TRIAC Yes H = 0÷5V (ratiometric)
* 0, 1 (only for XC400CX and XC600CX) ** 0, 1, 2, 3 (only for XC645)
4, 5 (only for XC600D) 4, 5 (not for XC645)

80 COMPRESSOR RACK REFRIGERATION CONTROLLERS

 TYPE of COMPRESSOR RACKS
The XC400/600 series, thanks to a powerful and complete range, ensures optimal management of compact compressor racks:
• with compressors and fans also with suction or discharge inverter; XC645CX - XC645D
• with 2 discharge and 1 suction also with inverter; APPROVED FOR
• with DigitalTM compressors.

Example of circuits managed by the XC400/600 series

1 SUCTION CIRCUIT 2 SUCTION CIRCUITS

1 CONDENSATION CIRCUIT 1 CONDENSATION CIRCUIT

CONNECTIONS
2 different version of terminal block are Screws for XC400CX Disconnectable for XC600CX Screw disconnectable for XC600D
available depending on the model of the
controllers:

FLOATING CONDENSING
The dynamic set point guarantees excellent plant efficiency, taking real operational conditions into consideration. The condensing set point is automatically
adjusted according to the external temperature, keeping the safety values, to optimize the condensing temperature. The reduction of this temperature entails a
reduction of the pressure gap between suction and condensing decreasing the consumption of compressors and saving energy.

Temperature

SET MAX
condenser

SET MIN Condenser SET

condenser External temperature

Time

FAN FUNCTIONING DURING NIGHT MODE

This special function allows the maximum fan speed to be decreased, which reduces plant noise. Thanks to the MES (Maximum output during Energy Saving)
the maximum fan speed is reduced during the night.

V
10

SETF: supply pressure setting to be maintained

Pb/2: regulation band centred around the setting
AOM x10
100 AOM: minimum allowed speed for the fans
0 inF: relay set as fan inverter
P2
inF P2: condensing pressure (temperature) probe
On V: analogical output value set as 0÷10V
ESF: energy saving differential for fan regulation
SETF-Pb/2 SETF+ESF-Pb/2 SETF+Pb/2 P2

COMPRESSOR RACK REFRIGERATION CONTROLLERS 81

 Up to 5 COMPRESSOR/FAN COMPRESSOR RACK
XC400/600 CONTROLLERS also with INVERTER MANAGEMENT

XC450CX Digital controller for managing up to 5 compressors or fans

XC640D Digital controller for simultaneous management of up to 4 compressors and fans

XC645CX Digital controllers for DigitalTM compressor management

XC645D
CX: 32x74mm D: 4 DIN Rail

FEATURES XC450CX XC640D XC645CX XC645D

First display: n° digits ± 4 d.p. ± 4 d.p. ± 4 d.p. ± 4 d.p.
Second display: n° digits ± 4 d.p. ± 4 d.p. ± 4 d.p. ± 4 d.p.
Power supply 12, 24Vac/dc 110, 230Vac 12, 24Vac/dc 110, 230Vac
Probe inputs
Suction 0÷5V, 4÷20mA, NTC 0÷5V, 4÷20mA, NTC 0÷5V, 4÷20mA, NTC 0÷5V, 4÷20mA, NTC
Suction 2
Condensing 0÷5V, 4÷20mA, NTC 0÷5V, 4÷20mA, NTC 0÷5V, 4÷20mA, NTC 0÷5V, 4÷20mA, NTC
Configurable NTC NTC NTC
Digital inputs
Low pressure switch 1 1 1
High pressure switch 1 1 1
Alarm 5 4 4 5
Configurables 1 2 1 2
Relay outputs
Loads 5 x 5A 4 x 5A 4 x 5A 4 x 5A
Other outputs
DigitalTM compressor TRIAC TRIAC
Inverter-compressor 4÷20mA/0÷10V opt 4÷20mA/0÷10V opt
Inverter-fans 4÷20mA/0÷10V opt 4÷20mA/0÷10V opt 4÷20mA/0÷10V opt
Load 12V/40mA
Hot Key/Prog Tool Kit pres pres pres pres
Serial TTL RS485 TTL RS485
Other
Remote keyboard VC660 VC660
Alarms last 10 last 10 last 10 last 10
Buzzer opt pres opt pres
CWC15-KIT, CWC30-KIT,
Connection kit
CAB/CJ15, CAB/CJ30

XC450CX XC645CX

XC640D XC645D

82 COMPRESSOR RACK REFRIGERATION CONTROLLERS

Up to 6 COMPRESSOR/FAN COMPRESSOR RACK
CONTROLLERS and KEYBOARD also with INVERTER MANAGEMENT XC600
XC650CX Digital controller for simultaneous management of up to 5 compressors and fans

XC652CX Compressor rack digital controller with 2 suctions

XC660D Digital controller for simultaneous management of up to 6 compressors and fans

VC660 Keyboard for XC600D controllers

CX: 32x74mm D: 4 DIN Rail 100x64mm

FEATURES XC650CX XC652CX XC660D VC660

First display: n° digits ± 4 d.p. ± 4 d.p. ± 4 d.p. ± 4 d.p.
Second display: n° digits ± 4 d.p. ± 4 d.p. ± 4 d.p. ± 4 d.p.
Power supply 12, 24Vac/dc 12, 24Vac/dc 110, 230Vac from controller
Probe inputs
Suction 0÷5V, 4÷20mA, NTC 0÷5V, 4÷20mA, NTC 0÷5V, 4÷20mA, NTC
Suction 2 0÷5V, 4÷20mA, NTC
Condensing 0÷5V, 4÷20mA, NTC NTC 0÷5V, 4÷20mA, NTC
Configurable NTC 0÷5V, 4÷20mA, NTC
Digital inputs
Low pressure switch 1 1 1
High pressure switch 1 1 1
Alarm 4 4 6
Configurables 1 1 2
Relay outputs
Loads 5 x 5A 5 x 5A 6 x 5A
Other outputs
DigitalTM compressor
Inverter-compressor 4÷20mA/0÷10V opt 4÷20mA/0÷10V opt 4÷20mA/0÷10V opt
Inverter-fans 4÷20mA/0÷10V opt 4÷20mA/0÷10V opt 4÷20mA/0÷10V opt
Load 12V/40mA 12V/40mA
Hot Key/Prog Tool Kit pres pres pres
Serial TTL TTL RS485
Other
Remote keyboard VC660
Alarms last 10 last 10 last 10
Buzzer opt opt pres opt
CW15-KIT, CW25-KIT, CW15-KIT, CW25-KIT,
Connection kit
CAB/CJ15, CAB/CJ30 CAB/CJ15, CAB/CJ30

XC650CX - XC652CX XC660D

COMPRESSOR RACK REFRIGERATION CONTROLLERS 83

 D: 10 DIN Rail
VG: 82x156mm

XC1000 SERIES: up to 15 COMPRESSOR/FAN OUTPUT APPLICATIONS

• Electronic controllers for compressors and condensing fans management of medium-large compressor racks
• Scroll, semi-hermetic, multi stages, with different power and screw compressor management
• Concise information about the variables of the compressor rack through the VISOGRAPH display
• 2 analogue outputs for frequency compressors
• 2 analogue outputs for inverter for fans
• Hourly run time signals for maintenance
• Sub-cooling management
• Subcritical CO2 regulation
• Compressor unloading in case of high condensing pressure alarm
• Suction superheat calculation with alarm management and possible stop of compressors
• Liquid injection valve activation to increase superheat
• Alarm management with absolute and relative pressure
• Hot Key or Prog Tool Kit connector for quick and easy programming
• Serial connection to monitoring systems
• 12VA max power absorption

HOW to ORDER

XC1000D X C 1 0 D - 1 B 0 D E

B D E
Measurement unit 4÷20mA/0÷10V Inputs
C = °C 0 = No C = NTC
F = °F 1 = Yes D = PTC
B = Bar E = 4÷20mA
P = PSI F = Suction PP11; Condensing PP30
K = KPA G = Ratiometric

VGC810 V G C 8 1 0 - A B 0 0 0

A B
Buzzer Kind of mounting
0 = No P = Panel
1 = Yes W = Wall

84 COMPRESSOR RACK REFRIGERATION CONTROLLERS

KINDS OF CIRCUIT
The XC1000D series is able to manage in the best possible way the majority of applications for refrigeration circuits.

1 SUCTION CIRCUIT 2 SUCTION CIRCUITS 2 SUCTION CIRCUITS

1 CONDENSATION CIRCUIT 1 CONDENSATION CIRCUIT 2 CONDENSATION CIRCUITS

CO2 REGULATION
CO2 use is increasing thanks to the advantages it offers in cooling plants. For this reason there is also a greater demand for accessories.
Thanks to special algorithms, the XC1000D series can manage and monitor CO2 plants that work in cascade connection with
sub-critical cycle.

CO2
COMPATIBILITY with DIGITALTM COMPRESSORS
Thanks to its powerful hardware platform and to the advanced algorithms, the XC1000D family is able to drive the majority of compressor racks present in the
market. An interesting match is the one with Dixell XEV02D driver that allows management of compressor racks equipped with DigitalTM compressors. In these
applications, by using the modulating capacity, the plant receives the optimum refrigeration power thereby reducing consumption.

DIGITALTM
COMPRESSORS
MASTER
SLAVE

4÷20mA, 0÷10V

XEV02D
XC1000D

COMPRESSOR RACK REFRIGERATION CONTROLLERS 85

 ENERGY SAVING MANAGEMENT
The XC1000D series gives to the user several solutions that let you to manage energy savings. The controllers have a special algorithm that lets you to optimize
the efficiency of the plant, ensuing energy savings. The following are a range of the most important solutions that Dixell offers to customers to achieve energy
savings.

COMPRESSORS with INVERTER

When the plant needs more power (when the temperature gets out of the band) the inverter compressor frequency increases. If this is not enough, the other
compressors (C2, C3, ...) will be activated in sequence. At the same time the controller will modulate the inverter compressor frequency in order to have a uniform
increase of the plant power.

Pressure

Time

Inverter management
output

Time
Compressor
status

Inverter

Time

EC FANS – INVERTER
In this case all condensing fans are driven by one inverter or are EC fans.
The inverter power is proportional to the condensing pressure value and the analog output is modulated proportionally to the condensing pressure/temperature
over the set (SET1÷SET2). Under SET1 the output will be switched off, over the SET2 the output is at 100%.
The relay set as inverter will be activated if the condensing pressure/temperature is higher than the SET1 and switched off when the condensing pressure is
lower than the SET1. It can be used to allow the inverter regulation.

Pressure

Time

Inverter
output

Minimum value
analog output

Time

Inverter
relay

Time

86 COMPRESSOR RACK REFRIGERATION CONTROLLERS

 Suction
set point
SUCTION DYNAMIC SET POINT
Suction temperature/pressure optimization can depending
on retail space temperature.
The dynamic set point guarantees excellent plant efficiency,
considering the real operational conditions. The plant modifies
the suction temperature/pressure according to the retail space
temperature so the refrigeration power changes depending on
POS
the real thermodynamic exchange. Temperature

CONDENSER DYNAMIC SET POINT Condenser

set point
Condenser temperature/pressure optimization can depend
on the external temperature.
The condenser temperature/pressure is modified according
to the external temperature. The condensing set point is
automatically adjusted according to the external temperature,
to get an optimum condensing temperature.
External
Temperature

REDUCED SET POINT

An internal 7 day clock can automatically change the
adjustment’s set point, depending on a particular system’s
individual requirements, to enter an energy saving cycle during
nights and weekends, when less power is required. This energy
saving cycle can also be initiated from an external source via a
digital input.

SUPERVISION SET fig. 1

The connection to the modern supervising systems (of Dixell)
allows, thanks to the CRO (Compressor Rack Optimization),
to manage in the best way the compressor rack set point
ng

depending on the devices connected, with the result of

visi
SET
r

RS485
supe

having an optimize energy saving on the plant. The system,

project

equipped with the CRO function, analyzes the information SET

from the controller in the application to determine if a

controller needs more refrigeration power and the quantity.
The set point will be re-calculate in order to satisfy the
worse instance and sent from the supervising system to
the XC1000D; this will be the working set point (fig. 1). If
fig. 2
the supervising system can’t manage the XC1000D, is the
controller that “decided” to replace the set point (coming
bar
from the system) and will then define the set point in the
program phase.
The 2 graphs (fig. 2) emphasize that when the CRO
algorithm is active, in a real installation, the set point
Set point
becomes on average higher, and consequently the energy Time

consumption decreases. The dotted line represents the KWatt

average weekly value.
Consumption

Time

CRO ON

COMPRESSOR RACK REFRIGERATION CONTROLLERS 87

 Up to 11 COMPRESSOR and FAN COMPRESSOR
XC1000 RACK CONTROLLERS

XC1008D Digital controller for simultaneous management of up to 8 compressors and fans

XC1011D Digital controller for simultaneous management of up to 11 compressors and fans

D: 10 DIN Rail

FEATURES XC1008D XC1011D

Display LCD on VGC810 LCD on VGC810
Power supply 24Vac/dc (from TF10D) 24Vac/dc (from TF20D)
Probe inputs
Suction NTC, PTC, 4÷20mA, 0÷5V NTC, PTC, 4÷20mA, 0÷5V
Suction 2 NTC, PTC, 4÷20mA, 0÷5V
Condensing NTC, PTC, 4÷20mA, 0÷5V NTC, PTC, 4÷20mA, 0÷5V
Condensing 2 NTC, PTC, 4÷20mA, 0÷5V
Auxiliary NTC, PTC NTC, PTC
Auxiliary 2 NTC, PTC NTC, PTC
Auxiliary 3 NTC, PTC
Auxiliary 4 NTC, PTC
Digital inputs
Low pressure switch 1 1
Low pressure switch 2 1
High pressure switch 1 1
High pressure switch 2 1
Safety loads 8 11
Configurable 4 4
Relay outputs
Loads 8 x 7A config 11 x 7A config
Alarms 2 x 8A 2 x 8A
Other outputs
Inverter compressors 4÷20mA/0÷10V opt 2 x 4÷20mA/0÷10V opt
Inverter fans 4÷20mA/0÷10V opt 2 x 4÷20mA/0÷10V opt
Hot Key/Prog Tool Kit pres pres
Visokey
Serial RS485 RS485
Other
Remote display VGC810 VGC810
Alarms last 100 last 100
Buzzer on keyboard on keyboard

XC1008D - XC1011D

88 COMPRESSOR RACK REFRIGERATION CONTROLLERS

CONTROLLER and GRAPHIC DISPLAY for COMPRESSOR
RACKS with up to 15 COMPRESSORS and FANS XC1000

XC1015D Digital controller for simultaneous management of up to 15 compressors and fans

Remote keyboard with LCD graphic display and interface dedicated to the management
VGC810 of compressor racks by means of XC1000D controllers (IP65 front protection)

D: 10 DIN Rail VG: 82x156mm

FEATURES XC1015D VGC810

Display LCD on VGC810 LCD - 240x96pixels
Power supply 24Vac/dc (from TF20D) from controller
Probe inputs
Suction NTC, PTC, 4÷20mA, 0÷5V
Suction 2 NTC, PTC, 4÷20mA, 0÷5V
Condensing NTC, PTC, 4÷20mA, 0÷5V
Condensing 2 NTC, PTC, 4÷20mA, 0÷5V
Auxiliary NTC, PTC
Auxiliary 2 NTC, PTC
Auxiliary 3 NTC, PTC
Auxiliary 4 NTC, PTC
Digital inputs
Low pressure switch 1
Low pressure switch 2 1
High pressure switch 1
High pressure switch 2 1
Safety loads 15
Configurable 4
Relay outputs
Loads 15 x 7A config
Alarms 2 x 8A
Other outputs
Inverter compressors 2 x 4÷20mA/0÷10V opt
Inverter fans 2 x 4÷20mA/0÷10V opt
Hot Key/Prog Tool Kit pres
Visokey pres
Serial RS485
Other
Remote display VGC810
Alarms last 100
Buzzer on keyboard opt

XC1015D

max 30mt

COMPRESSOR RACK REFRIGERATION CONTROLLERS 89

 D: 4 DIN Rail

D: 10 DIN Rail

VG: 82x156mm

iProRACK SERIES: up to 2 CIRCUIT and 6 COMPRESSOR per CIRCUIT

APPLICATIONS

• Electronic controllers for compressor racks studied to manage even the most complex installations
• Management of scroll, semi-hermetic, multi-stages, different capacity and screw compressors
• Management of 2 circuits with 2 inverters
• Transcritical CO2 regulation
• Special algorithms for energy saving
• Suction and condensing dynamic set point optimization
• Sub-cooling management
• Copeland Stream CoreSenseTM diagnostics control module integration
• Concise information about the variables of the compressor rack through the VISOGRAPH
• Powerful platform with LINUX operating system on CPU ARM9 (200MHz/32bit)
• Ethernet for the connection to an intranet-internet network
• USB output for configuration update
• RS485 slave serial outputs for the connection to XWEB supervising and controlling systems
• Type of refrigerants: R22, R134A, R404A, R507, R717, R407, R407C, R407F

HOW to ORDER

IPR208D I P R 2 0 8 D - 1 0 C 2 0

IPR215D I P R 2 1 5 D - 1 0 C 0 0

C
Ethernet, protocols
0 = No
1 = Yes

VGIPG V G I P G - A B 0 D 0

A B D
Buzzer Kind of mounting Coding
0 = No P = Panel 0 = Ascii
1 = Yes W = Wall 1 = Unicode

90 COMPRESSOR RACK REFRIGERATION CONTROLLERS

INTERNAL WEB SERVER
The iProRACK controllers have an integrated
web site that can be easily reached through a
standard browser. This instrument is very useful
to configure the controller and to display and
change the machine variables.

MAIN FEATURES
• CPU: 200MHz
• Processor: 32bit
• RAM memory: 32MB (4 DIN Rail), 64MB (10 DIN Rail)
• Data storage on Flash memory: 32MB (4 DIN Rail), 128MB (10 DIN Rail)
• Power absorption: 40VA max (4 DIN Rail), 20VA max (10 DIN Rail)

CONNECTIVITY
The powerful platform that marks the iProRACK controllers and allows the compressor rack to be easily and quickly reached both locally and remotely. In addition
to the connection via Ethernet, there is also one via RS485 that allows the connection to XWEB systems, ensuring complete plant monitoring and controlling.

Also with inverter Also with inverter

2 SUCTION CIRCUITS
2 CONDENSING CIRCUITS

RS485 INTERNET
GPRS (opt)
E-MAIL

Ethernet

E-MAIL
Router SMS

LOCAL

INTRANET
REMOTE
CONNECTION
(via standard Browser)

COMPRESSOR RACK REFRIGERATION CONTROLLERS 91

 CONTROLLER and GRAPHIC DISPLAY for COMPRESSOR
iProRACK RACKS with up to 2 CIRCUITS and 6 COMPRESSORS per CIRCUIT

Digital controller in 4 DIN Rail format with bayonet + screw connectors for compressor rack
IPR208D management

Digital controller in 10 DIN Rail format with bayonet + screw connectors for compressor rack
IPR215D management

Remote keyboard with LCD graphic display and interface dedicated to the management of
D: 10 DIN Rail D: 4 DIN Rail VG: 82x156mm VGIPG compressor racks by means of iProRACK controllers (IP65 front protection)

FEATURES IPR208D IPR215D VGIPG

Display LCD on VGIPG LCD on VGIPG LCD - 240x96pixels
Power supply 24Vac/dc from TF40D 24Vac/dc from TF20D from controller
Probe inputs
0÷1V, 0÷5V, 0÷10V, 0÷20mA,
6 x config 10 x config
4÷20mA, NTC, PTC, DI
Digital inputs
Opto-insulated 11 x config 20 x config
Relay outputs
Configurable 8 x 5A 15 x 5A
Other outputs
0÷10V/4÷20mA 4 x config 2 x config
0÷10V 4
RS485 master + slave master + slave
USB pres pres
CANBus pres
Ethernet via USB-ETH-CONV opt
Visokey pres
Other
Remote display 1 x VGIPG 2 x VGIPG
Real time clock pres pres
Flash memory 32MB 128MB
Connections bayonet + screw bayonet + screw
Connection kit IP-FC208 IP-FC215CP
BACnet protocol opt opt
Buzzer opt

IPR208D IPR215D

92 COMPRESSOR RACK REFRIGERATION CONTROLLERS

FAN SPEED CONTROLLERS
SECTION INDEX
FUNCTIONS MODELS

XV300 – three-phase fan speed control 94

Three-phase speed controllers XV308K – XV310K – XV312K
XV320K – XV328K – XV340K 95

XV05/10/22/100 – single-phase fan speed control 96

Single-phase speed controllers XV05PD – XV05PK – XV10PK
XV22PK – XV105D – XV110K
XV150K 97
Accessory XV-ACK 98

FAN SPEED CONTROLLERS 93

 K: 270x340mm

K: 230x265mm K: 165x230mm

XV300 SERIES: THREE-PHASE FAN SPEED CONTROL

• Chopped phase regulators designed for 3-phase fans with adjustable voltage motors
• Designed for adjustable voltage motors from 8 to 40A
• Oversized heat sinks for better heat disposal
• Integrated heat protection
• Oversized power stages
• Optimized radiofrequency filters
• Available with ABS self-extinguishing cover (IP55) or in aluminum (IP20)
• Less time spent for wiring operations thanks to the screwless connectors
with useful cable protectors
• On board 0÷10V output to be used for testing operation
• Compatible with Dixell controllers equipped with PWM, 4÷20mA,
0÷10V outputs like the iPro, XC600, XM600, ... series

HOW to ORDER

XV308/312/328/340K X V 3 K - 7 0 1 0 0

XV310K X V 3 1 0 K - 7 0 0 0 0

XV320K X V 3 2 0 K - 7 0 C 0 0

C
Protection grade
0 = IP20
1 = IP55

94 FAN SPEED CONTROLLERS

THREE-PHASE SPEED CONTROLLERS XV300
Speed controller designed for three-phase A.C. motors up to 5,5kVA, 8A, with input for PWM,
XV308K 4÷20mA or 0÷10V, dimension 165x230mm, weight 2,5Kg, power dissipation 30W

Speed controller designed for three-phase A.C. motors up to 6,5VA, 10A, with input for PWM,
XV310K 4÷20mA or 0÷10V, dimension 165x230mm, weight 3Kg, power dissipation 40W K: 165x230mm K: 230x265mm

Speed controller designed for three-phase A.C. motors up to 8kVA, 12A, with input for PWM,
XV312K 4÷20mA or 0÷10V, dimension 230x265mm, weight 4Kg, power dissipation 60W

Speed controller designed for three-phase A.C. motors up to 13kVA, 20A, with input for PWM,
XV320K 4÷20mA or 0÷10V, dimension 230x265mm, weight 4,8Kg, power dissipation 80W

Speed controller designed for three-phase A.C. motors up to 19kVA, 28A, with input for PWM,
XV328K 4÷20mA or 0÷10V, dimension 270x340mm, weight 7Kg, power dissipation 120W
K: 270x340mm
Speed controller designed for three-phase A.C. motors up to 26kVA, 40A, with input PWM,
XV340K 4÷20mA or 0÷10V, dimension 270x340mm, weight 9Kg, power dissipation 155W

FEATURES XV308K XV310K XV312K XV320K XV328K XV340K

Power supply 400Vac 400Vac 400Vac 400Vac 400Vac 400Vac
Protection grade IP55 IP20 IP55 IP55, IP20 IP55 IP55
Maximum load 8A 10A 12A 20A 28A 40A
PWM PWM PWM PWM PWM PWM
Control input 4÷20mA 4÷20mA 4÷20mA 4÷20mA 4÷20mA 4÷20mA
0÷10V 0÷10V 0÷10V 0÷10V 0÷10V 0÷10V
1A, 250Vac 1A, 250Vac 1A, 250Vac 1A, 250Vac
Alarm relay
3A, 30Vdc 3A, 30Vdc 3A, 30Vdc 3A, 30Vdc
Auxiliary output 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc 10Vdc
Supply LED pres pres pres pres pres pres
Alarm LED pres pres pres pres pres pres
Relay ON LED pres pres pres pres

XV308K - XV310K XV312K - XV320K - XV328K - XV340K

FAN SPEED CONTROLLERS 95

 K: 175x200mm
K: 139x158mm

D: 4 DIN Rail

PK: 80x70mm

XV05/10/22/100 SERIES: SINGLE-PHASE FAN SPEED CONTROL

• Chopped phase speed controllers to control pressure and temperature in refrigerating systems including cooling fans
• Inputs for regulation by temperature and pressure
• Direct or inverse action for condenser or evaporator fans
• Cut off, minimum speed and max speed at start up functions
• Trigger output for managing another module
• Slave models managed by the input signal (for XV100)
• Compatible with Dixell controllers equipped with PWM, 4÷20mA, 0÷1V/0÷10V outputs like the iPro, XC600, XM600, ... series
• 1VA max power absorption
• Measurement range: 0÷100%

HOW to ORDER

XV05PD X V 0 5 P D - 5 0 0 0 0

XV05/10/22PK X V P K - 5 0 0 0 0

XV100 X V 1 - 5 B C D 0

B C D
Format Type of action Regulation input
0 = DIN D = Direct + Cut Off N = NTC probe
5 = Enclosure IP55 R = Inverse + Cut Off A = Current (4÷20mA)
N = Slave (not for regulation input = N) V = 0÷1V/0÷10V

96 FAN SPEED CONTROLLERS

SINGLE-PHASE SPEED CONTROLLERS XV05/10/22
XV05PD Speed controllers designed for single-phase A.C. motors up to 500W, 2A, PWM input
XV05PK
XV10PK Speed controller designed for single-phase A.C. motors up to 1000W, 4A, PWM input

XV22PK Speed controller designed for single-phase A.C. motors up to 2200W, 9,5A, PWM input
PD: 4 DIN Rail PK: 80x70mm

FEATURES XV05PD XV05PK XV10PK XV22PK

Power supply 230Vac 230Vac 230Vac 230Vac
Control input PWM PWM PWM PWM
Direct-inverse function
Full speed input at start up
Trigger signal pres pres pres pres
Minimum speed function
Cut off function

XV05PD XV05PK - XV10PK - XV22PK

FAN SPEED CONTROLLERS 97

XV100 SINGLE-PHASE SPEED ADVANCED CONTROLLERS

Speed controller designed for single-phase A.C. motors up to 500W, with input for NTC, 4÷20mA,
XV105D 0÷1V or 0÷10V

D: 4 DIN Rail K: 139x158mm Speed controller designed for single-phase A.C. motors up to 1kW, with input for NTC, 4÷20mA,
XV110K 0÷1V or 0÷10V

Speed controller designed for single-phase A.C. motors up to 5kW, with input for NTC, 4÷20mA,
K: 175x200mm XV150K 0÷1V or 0÷10V

FEATURES XV105D XV110K XV150K

Power supply 230Vac 230Vac 230Vac
NTC NTC NTC
Control input 4÷20mA 4÷20mA 4÷20mA
0÷1V/0÷10V 0÷1V/0÷10V 0÷1V/0÷10V
Direct-inverse function pres pres pres
Full speed input at start up pres pres pres
Trigger signal pres pres pres
Minimum speed function pres pres pres
Cut off function pres pres pres

XV105D XV110K - XV150K

ACCESSORY
XV-ACK
Anti-condensing kit for XV110K and XV150K models
• Resistance at 25°C (77°F): 100÷600Ohm
• Rated operating voltage: 120Vac or 220Vac
• Max operating voltage: 260Vac
• Steady state current at 25°C (77°F): 12A±30% (120Vac) 9A±30% (220Vac)

98 FAN SPEED CONTROLLERS

TEMPERATURE/HUMIDITY/PRESSURE
CONTROLLERS
SECTION INDEX
FUNCTIONS MODELS

XT100 – NTC, PTC, Pt100, TcJ, TcK, TcS, 4÷20mA, 0÷1V, 0÷10V multi-probe input 100
1 stage digital controllers XT110C – XT110D
XT111C – XT111D 101
2 stage digital controllers XT120C – XT120D
XT121C – XT121D 102
Neutral zone digital controllers XT130C – XT130D
XT131C – XT131D 103
2 stage digital controllers (1 PID) XT141C – XT141D 104
3 stage digital controller XT151D 104
4 stage digital controller XT160D 104

TEMPERATURE/HUMIDITY/PRESSURE CONTROLLERS 99
 C: 32x74mm

D: 4 DIN Rail

XT100 SERIES: NTC, PTC, Pt100, TcJ, TcK, TcS, 4÷20mA, 0÷1V,
0÷10V MULTI-PROBE INPUT

• Universal controllers to manage temperature, humidity and pressure in both the industrial and commercial applications
• Stock optimization: thanks to the multi-probe inputs
• 1 or 2 stage ON/OFF or PID with direct or reverse action
• Temperature inputs: PTC, NTC, Pt100; thermocouple J, K or S by selecting the parameters
• Pressure or humidity inputs: 4÷20mA, 0÷1V or 0÷10V by selecting the parameters
• Direct line power supply 230 (110)Vac. No external transformer required
• Display with integrated measurement unit (°C/°F/%RH/Bar/PSI)
• Hot Key or Prog Tool Kit connector for quick and easy programming
• Serial connection to monitoring systems
• 3VA max power absorption
• Display with red LED (10,5 mm high) and 5 icons

HOW to ORDER

XT100 X T 1 - A B C D U For blue display please contact Dixell

A B C D
Power supply Measurement unit Buzzer Analog output Input
0 = 12Vac/dc C = °C 0 = No No P = PTC (NTC)
1 = 24Vac/dc F = °F 1 = Yes No T = PTC (NTC, Pt100, TcJ,TcK, TcS)
2 = 24Vac B = Bar 2* = No 4÷20mA A = 4÷20mA, 0÷1V, 0÷10V
4 = 110Vac P = PSI 3* = Yes 4÷20mA B = PP07 (-0.5÷7bar)
5 = 230Vac H = %RH 4* = No 0÷10V C = PP30 (0÷30bar)
N = No measurement unit 5* = Yes 0÷10V D = PP11 (-0.5÷11bar)
* Only for D format H = XH10/20P

100 TEMPERATURE/HUMIDITY/PRESSURE CONTROLLERS

1 STAGE CONTROLLERS XT100
XT110C ON/OFF configurable digital 1 stage controllers
XT110D
XT111C ON/OFF configurable digital 1 stage controllers with alarm relay
XT111D
C: 32x74mm D: 4 DIN Rail

FEATURES XT110C XT110D XT111C XT111D

Display: n° digits ± 3½ d.p. ± 3½ d.p. ± 3½ d.p. ± 3½ d.p.
12, 24Vac/dc 24Vac/dc 12, 24Vac/dc 24Vac/dc
Power supply
110, 230Vac 24, 110, 230Vac 110, 230Vac 24, 110, 230Vac
Probe inputs
NTC, PTC, Pt100, TcJ, TcK, TcS, 4÷20mA,
config config config config
0÷1V, 0÷10V
Relay outputs
Stage 1 8A no 8A/nc 5A 8A no 8A/nc 5A
Stage 2
Stage 3
Stage 4
Alarm 8A no 8A/nc 5A
Other
Digital input pres pres pres pres
Hot Key/Prog Tool Kit output pres* pres pres* pres
Serial output TTL* TTL TTL* TTL
Analog output 4÷20mA, 0÷10V 4÷20mA, 0÷10V
Buzzer opt opt opt opt

* Prog Tool Kit output and serial output only for models with 12/24Vac/dc probe supply

XT110C XT111C

XT110D XT111D

TEMPERATURE/HUMIDITY/PRESSURE CONTROLLERS 101

XT100 2 STAGE CONTROLLERS

XT120C ON/OFF configurable digital 2 stage controllers

XT120D
XT121C ON/OFF configurable digital 2 stage controllers with alarm relay
XT121D
C: 32x74mm D: 4 DIN Rail

FEATURES XT120C XT120D XT121C XT121D

Display: n° digits ± 3½ d.p. ± 3½ d.p. ± 3½ d.p. ± 3½ d.p.
12, 24Vac/dc 24Vac/dc 12, 24Vac/dc 24Vac/dc
Power supply
110, 230Vac 24, 110, 230Vac 110, 230Vac 24, 110, 230Vac
Probe inputs
NTC, PTC, Pt100, TcJ, TcK, TcS, 4÷20mA,
config config config config
0÷1V, 0÷10V
Relay outputs
Stage 1 8A no 8A/nc 5A 8A no 8A/nc 5A
Stage 2 8A no 8A/nc 5A 8A no 8A/nc 5A
Stage 3
Stage 4
Alarm 8A no 8A/nc 5A
Other
Digital input pres pres pres pres
Hot Key/Prog Tool Kit output pres* pres pres* pres
Serial output TTL* TTL TTL* TTL
Analog output 4÷20mA, 0÷10V 4÷20mA, 0÷10V
Buzzer opt opt opt opt
* Prog Tool Kit output and serial output only for models with 12/24Vac/dc probe supply

XT120C XT121C

XT120D XT121D

102 TEMPERATURE/HUMIDITY/PRESSURE CONTROLLERS

NEUTRAL ZONE CONTROLLERS XT100
XT130C ON/OFF configurable digital neutral zone controllers
XT130D
XT131C ON/OFF configurable digital neutral zone controllers with alarm relay
XT131D
C: 32x74mm D: 4 DIN Rail

FEATURES XT130C XT130D XT131C XT131D

Display: n° digits ± 3½ d.p. ± 3½ d.p. ± 3½ d.p. ± 3½ d.p.
12, 24Vac/dc 24Vac/dc 12, 24Vac/dc 24Vac/dc
Power supply
110, 230Vac 24, 110, 230Vac 110, 230Vac 24, 110, 230Vac
Probe inputs
NTC, PTC, Pt100, TcJ, TcK, TcS, 4÷20mA,
config config config config
0÷1V, 0÷10V
Relay outputs
Stage 1 8A no 8A/nc 5A 8A no 8A/nc 5A
Stage 2 8A no 8A/nc 5A 8A no 8A/nc 5A
Stage 3
Stage 4
Alarm 8A no 8A/nc 5A
Other
Digital input pres pres pres pres
Hot Key/Prog Tool Kit output pres* pres pres* pres
Serial output TTL* TTL TTL* TTL
Analog output 4÷20mA, 0÷10V 4÷20mA, 0÷10V
Buzzer opt opt opt opt
* Prog Tool Kit output and serial output only for models with 12/24Vac/dc probe supply

XT130C XT131C

XT130D XT131D

TEMPERATURE/HUMIDITY/PRESSURE CONTROLLERS 103

XT100 2 (1 PID), 3 and 4 STAGE CONTROLLERS

XT141C Configurable digital 2 stage controllers (1 PID) with alarm relay

XT141D
XT151D ON/OFF configurable digital 3 stage controllers with alarm relay

XT160D ON/OFF configurable digital 4 stage controllers

C: 32x74mm D: 4 DIN Rail

FEATURES XT141C XT141D XT151D XT160D

Display: n° digits ± 3½ d.p. ± 3½ d.p. ± 3½ d.p. ± 3½ d.p.
12, 24Vac/dc 24Vac/dc 24Vac/dc 24Vac/dc
Power supply
110, 230Vac 24, 110, 230Vac 24, 110, 230Vac 24, 110, 230Vac
Probe inputs
NTC, PTC, Pt100, TcJ, TcK, TcS, 4÷20mA,
config config config config
0÷1V, 0÷10V
Relay outputs
Stage 1 8A no 8A/nc 5A no 8A/nc 5A no 8A/nc 5A
Stage 2 8A no 8A/nc 5A no 8A/nc 5A no 8A/nc 5A
Stage 3 no 8A/nc 5A no 8A/nc 5A
Stage 4 8A
Alarm 8A no 8A/nc 5A 8A
Other
Digital input pres pres pres pres
Hot Key/Prog Tool Kit output pres* pres pres pres
Serial output TTL* TTL TTL TTL
Analog output 4÷20mA, 0÷10V 4÷20mA, 0÷10V 4÷20mA, 0÷10V
Buzzer opt opt opt opt

* Prog Tool Kit output and serial output only for models with 12/24Vac/dc probe supply

XT141C XT141D

XT151D XT160D

104 TEMPERATURE/HUMIDITY/PRESSURE CONTROLLERS

GENERAL PURPOSE PROGRAMMABLE
CONTROLLERS
SECTION INDEX
FUNCTIONS MODELS

XEV20 – stepper electronic expansion valve management 106

Driver for EEV management compatible with iPro controllers XEV20D 107

iProGENIUS – general applications – high connectivity 108

Development tool iPro-TOOL 111
Programmable controllers with disconnectable connectors IPG108D – IPG108E – IPG115D 112
Programmable controllers with bayonet connectors IPG208D – IPG208E
IPG215D – IPG215F 113
Expansion modules with disconnectable connectors IPX106D – IPX115D
IPX125D – IPX306D 114
Expansion modules with bayonet connectors IPX206D – IPX215D – IPX225D 114
Connectivity module IPL500D 115
LCD graphic display VGIPG 116
Accessory VISOKEY 116

GENERAL PURPOSE PROGRAMMABLE CONTROLLERS 105

 D: 4 DIN Rail

XEV20: STEPPER ELECTRONIC EXPANSION VALVE MANAGEMENT

• Driver for iPro controllers for the stepper electronic expansion valve management
• Optimization of superheat regulation inside the unit
• Increased energy savings
• Single or dual circuit
• Support for motorized valves unipolar/bipolar
• Temperature analog inputs (NTC, PTC, Pt1000)
• Pressure analog inputs (0÷5V, 4÷20mA)
• 4-position DIP Switch to set the address
• LAN output for the connection to iPro series controllers in 4 DIN format
• CANBus output for the connection to iPro series controllers in 10 DIN format
• Type of refrigerant gas: R22, R134A, R404A, R407, R410, R507

HOW to ORDER

XEV X E V 2 0 D - 1 1 C 0 0

C
N° of valves
0 = 1 valve
1 = 2 valves

106 GENERAL PURPOSE PROGRAMMABLE CONTROLLERS

DRIVER for EEV MANAGEMENT COMPATIBLE with
iPro CONTROLLERS XEV20

Driver for 1 or 2 unipolar and bipolar stepper electronic expansion valves to use with iPro
XEV20D programmable controllers

D: 4 DIN Rail

FEATURES XEV20D
Power supply 24Vac/dc (from TF20D for 1 valve or from TF40D for 2 valves)
Probe inputs
N°4 (Pb1, Pb2, Pb3, Pb4) 0÷5V/4÷20mA/NTC/PTC/Pt1000 config
Other
LAN output pres
CANBus output pres
DIP switch for address selection pres
Connection kit DWXEV30

XEV20D - 1 circuit XEV20D - 2 circuits

GENERAL PURPOSE PROGRAMMABLE CONTROLLERS 107

 VG: 82x156mm
D, E: 4 DIN Rail

D, F: 10 DIN Rail

iProGENIUS SERIES: GENERAL APPLICATIONS

HIGH CONNECTIVITY

iProGENIUS is the Dixell family of programmable controllers that offers optimal solutions for all HVAC/R needs. They are suited
for all applications in the PLC world including shopping centers, hospitals, airports, boatyards, energy management plants, and
more. These controllers provide a high level of technology for ease of external connectivity and programmability providing
simple answers for the user’s needs, while offering local or remote monitoring control (accomplished with the powerful iProLINK
connectivity module). An intuitive and useful HMI is also offered through the VISOGRAPH graphic display and the touch screen
TGIPG display, while the expandability provided by the IPX modules allows use of these controllers with the most complex
machinery.

• Powerful platform based on LINUX operative system on ARM9 (200MHz/32bit) microprocessor

• Internal Web Server with standard and customized Web Site
• Ethernet for connection to an intranet-internet network and to other controllers for a distributed application management
• USB output that allows the download of parameters, data/alarm log and the applications and parameters upload
• RS485 serial outputs for the connection to XWEB supervising and controlling systems or to applications developed by third
Party Systems
• BACnet® communications allows the system to have easy and immediate integration with different manufactures ensuring
complete interoperability
• Connection to the expansion modules to increase system capacity
• Connection to the driver for
the management and control
of electronic expansion valves

108 GENERAL PURPOSE PROGRAMMABLE CONTROLLERS

MAIN FEATURES
• CPU: 200MHz
• Processor 32bit
• RAM memory: 32MB (4 DIN Rail)
64MB (10 DIN Rail)
• Data storing on Flash memory: 32MB (4 DIN Rail)
128MB (10 DIN Rail, IPL500D)
• Power absorption: 40VA max (IPG on 4 DIN Rail)
20VA max (IPG and IPX on 10 DIN Rail, IPL500D)
10VA max (IPX on 4 DIN Rail)

HOW to ORDER

IPRO-TOOL I P R O - T O O L - 0 0 0 0 E

E
Visoprog
0 = No
1 = 2 licences

IPG108D/E – IPG208D/E I P G 0 8 - 1 0 C D 0

IPG115D – IPG215D/F I P G 1 5 - A B C 0 0

A B C D
Power supply Modem Ethernet, protocols Serial port
1 = 24Vac/dc 0 = No 0 = No 1 = LAN
UL versions 1 = Internal modem (not for UL) 1 = Yes (for IPG115D, IPG215D and IPG215F) 2 = RS485 master
2 = 24Vac 2 = External modem 2 = BACnet
3 = 24Vdc (for IPG215)
3 = External + internal modem (not for UL)

IPX106D I P X 1 0 6 D - 1 0 0 0 0

IPX206D – IPX306D I P X 0 6 D - 1 0 0 0 E

IPX115D – IPX215D I P X 1 5 D - 1 0 0 0 0

IPX125D – IPX225D I P X 2 5 D - 1 0 0 0 2

E
N° of SSR relay
0=0
2=1

IPL500D I P L 5 0 0 D - 1 B C D 0

B C D
Modem Ethernet, protocols Serial port
0 = No 1 = Yes 1 = LAN
1 = Internal modem GPRS 2 = BACnet 2 = RS485 master

VGIPG V G I P G - A B 0 D 0

A B D
Buzzer Kind of mounting Coding
0 = No P = Panel 0 = Ascii
1 = Yes W = Wall 1 = Unicode

GENERAL PURPOSE PROGRAMMABLE CONTROLLERS 109

 CONNECTIVITY
The high degree of connectivity that marks iProGENIUS controllers, ensures a complete local and remote unit/plant management.

Switch
Local PC

E-MAIL
Ethernet Ethernet

USB/Ethernet SMS
converter GPRS (opt)

Ethernet

GPRS (opt)
RS485

Ethernet REMOTE CONNECTION

(via standard Browser)

XWEB SUPERVISING
SYSTEMS INTERNET/INTRANET
ACTUATORS
SERVO-MOTORS LOCAL/REMOTE PC

EXTERNAL MODEM
Ethernet
ModB

EXPANSIONS gsm/xweb modem

0÷

US Sla

et
rn
10

he
V /4

Et

ROOM PROBE
ve
÷2

CA temperature, humidity,
0m

NB 2
EEV DRIVER us 23
A

/LA RS dew-point
N

CANBu
s/LAN ast er
US M
ModB

4÷20mA ModBUS Master

PWM/0÷10V/

FAN MODULES Mod CONTROLLERS

et BUS
5/E thern Mas
ter
RS48

TIME-THERMOSTAT
TGIPG
Ethe
RS485

rnet

INTERNAL MODEM
VISOGRAPH

USB IPRO
IPRO CONTROLLERS
CONTROLLERS

110 GENERAL PURPOSE PROGRAMMABLE CONTROLLERS

 DEVELOPMENT TOOL iProTOOL
iPro-TOOL is a complete and easy to use tool that allows the user
to work independently to create programs for iPro controllers, taking
1 ISaGRAF® + WIZMATE advantage of all the programmable series potential. The package
includes manuals and the ISaGRAF®, WIZMATE and VISOPROG
2 ISaGRAF® + WIZMATE + VISOPROG (optional) software.
The user can choose among 2 options listed above.
Note: Wizmate can be used with iProRACK applications.

ISaGRAF®
ISaGRAF® is the standard, international and complete development
environment selected by Dixell to create programs that will be
uploaded into the iPro series. Also ideal for small applications, it can
manage several I/O points, allows users to create control systems,
and is supported all over the world. ISaGRAF® offers a combination
of a highly portable, robust management engines (Virtual Machine)
and an intuitive application development environment (Workbench).
ISaGRAF® integrates the best system for simulation and remote
debugging, supports the Flow Chart (FC: Flow Chart) and 5 different
programming languages coded according to IEC61131 (SFC: Sequencial
Function Chart; ST: Structured Text; FBD: Function Block Diagram; IL:
Instruction List; LD: Ladder Diagram).

WIZMATE
WIZMATE is versatile software that has a fast and easy programming
mode for iPro controllers (ideal for versions with the application
included like the iProRACK).

VISOPROG
The VISOPROG is a tool that allows users to create the VISOGRAPH
keyboard graphic interfaces. The program, installed on a PC, is
connected to ISaGRAF® project and has a basic interface that users
can easily customize depending on the requirements.

GENERAL PURPOSE PROGRAMMABLE CONTROLLERS 111

 PROGRAMMABLE CONTROLLERS with
iProGENIUS DISCONNECTABLE CONNECTORS

IPG108D Programmable controller in 4 DIN Rail format with disconnectable + screw connectors

Programmable controller in 4 DIN Rail format with LED display and

IPG108E disconnectable + screw connectors
D, E: 4 DIN Rail D: 10 DIN Rail
IPG115D Programmable controller in 10 DIN Rail format with disconnectable connectors

FEATURES IPG108D IPG108E IPG115D

Display dual with icons
Front led
Power supply 24Vac/dc from TF40D 24Vac/dc from TF40D 24Vac/dc from TF20D
Probe inputs
0÷1V, 0÷5V, 0÷10V, 0÷20mA, 4÷20mA,
6 x config 6 x config 10 x config
NTC, PTC, DI
Digital inputs
Optoinsulated 11 x config 11 x config 20 x config
Relay outputs
Configurable 8 x 5A 8 x 5A 12 x 5A + 3 x 8A
Other outputs
PWM
2 x config
0÷10V/4÷20mA 4 x config 4 x config
0÷10V 4
RS485 slave slave master + slave
USB pres pres pres
External modem GSM, analogue
LAN/RS485 master pres pres
CANBus pres
Ethernet via USB-ETH-CONV via USB-ETH-CONV opt
Other
Remote keyboard 1 x VGIPG 1 x GIPG 2 x VGIPG
Internal modem analogue opt
Real time clock pres pres pres
Flash memory 32MB 32MB 128MB
Connections disconnectable + screw disconnectable + screw disconnectable
Connection kit DWS30-KIT, IP-FC108 DWS30-KIT, IP-FC108 DWB30-KIT
Expansion modules IPX115D, IPX125D, IPX306D IPX115D, IPX125D, IPX306D IPX106D, IPX115D, IPX125D
BACnet protocol opt opt opt

IPG108D - IPG108E IPG115D

112 GENERAL PURPOSE PROGRAMMABLE CONTROLLERS

PROGRAMMABLE CONTROLLERS with BAYONET
CONNECTORS iProGENIUS
Programmable controller in 4 DIN Rail format with bayonet + screw connectors, ideal for the civil
IPG208D field

Programmable controller in 4 DIN Rail format with LED display and bayonet + screw connectors,
IPG208E ideal for the civil field

Programmable controller in 10 DIN Rail format with bayonet + screw connectors, ideal for the
IPG215D civil field D, E: 4 DIN Rail D, F: 10 DIN Rail

Programmable controller in 10 DIN Rail format with front LED and bayonet + screw connectors,
IPG215F ideal for the civil field

FEATURES IPG208D IPG208E IPG215D IPG215F

Display dual with icons
Front led n° 5
Power supply 24Vac/dc from TF40D 24Vac/dc from TF40D 24Vac/dc from TF20D 24Vac/dc from TF20D
Probe inputs
0÷1V, 0÷5V, 0÷10V, 0÷20mA,
6 x config 6 x config 10 x config 10 x config
4÷20mA, NTC, PTC, DI
Digital inputs
Optoinsulated 11 x config 11 x config 20 x config 20 x config
Relay outputs
Configurable 8 x 5A 8 x 5A 15 x 5A 15 x 5A
Other outputs
PWM
0÷10V/4÷20mA 4 x config 4 x config 2 x config 2 x config
0÷10V 4 4
RS485 slave slave master + slave master + slave
USB pres pres pres pres
External modem GSM, analogue GSM, analogue
LAN/RS485 master pres pres
CANBus pres pres
Ethernet via USB-ETH-CONV via USB-ETH-CONV opt opt
Other
Remote keyboard 1 x VGIPG 1 x VGIPG 2 x VGIPG 2 x VGIPG
Internal modem analogue opt analogue opt
Real time clock pres pres pres pres
Flash memory 32MB 32MB 128MB 128MB
Connections bayonet + screw bayonet + screw bayonet + screw bayonet + screw
Connection kit IP-FC208 IP-FC208 IP-FC215CP IP-FC215CP
Expansion modules IPX206D, IPX215D, IPX225D IPX206D, IPX215D, IPX225D IPX206D, IPX215D, IPX225D IPX206D, IPX215D, IPX225D
BACnet protocol opt opt opt opt

IPG208D - IPG208E IPG215D - IPG215F

GENERAL PURPOSE PROGRAMMABLE CONTROLLERS 113

 EXPANSION MODULES with DISCONNECTABLE and BAYONET
IPX CONNECTORS
IPX106D Expansion module in 4 DIN Rail format with disconnectable connectors and 6 relay outputs

IPX115D Expansion module in 10 DIN Rail format with disconnectable connectors and 15 relay outputs

IPX125D Expansion module in 10 DIN Rail format with disconnectable connectors and 25 relay outputs
D: 4 DIN Rail D: 4 DIN Rail D: 4 DIN Rail
IPX206D Expansion module in 4 DIN Rail format with bayonet + screw connectors and 6 relay outputs

IPX215D Expansion module in 10 DIN Rail format with bayonet + screw connectors and 15 relay outputs

IPX225D Expansion module in 10 DIN Rail format with bayonet + screw connectors and 25 relay outputs

D: 10 DIN Rail D: 10 DIN Rail IPX306D Expansion module in 4 DIN Rail format with disconnectable + screw connectors and 6 relay outputs

FEATURES IPX106D IPX115D IPX125D IPX206D IPX215D IPX225D IPX306D

24Vac/dc 24Vac/dc 24Vac/dc 24Vac/dc 24Vac/dc 24Vac/dc 24Vac/dc
Power supply
from TF10D from TF20D from TF20D from TF10D from TF20D from TF20D from TF10D
Probe inputs
0÷1V, 0÷5V, 0÷10V,
0÷20mA, 4÷20mA, 7 x config 10 x config 10 x config 7 x config 10 x config 10 x config 7 x config
NTC, PTC, DI

Digital inputs
Optoinsulated 3 x config 20 x config 20 x config 3 x config 20 x config 20 x config 3 x config
Relay outputs
5 x 5A + 1 x 8A 5 x 5A + 1 x 8A
18 x 5A
12 x 5A or 21 x 5A or
Configurable 6 x 5A + 3 x 8A 15 x 5A
+ 3 x 8A 4 x 5A + 1 x 8A + 4 x SSR 4 x 5A + 1 x 8A
+ 4 x SSR
+ 1 x SSR + 1 x SSR
Other outputs
0÷10V/4÷20mA 2 x config 2 x config 2 x config 2 x config
0÷10V 3 4 4 3 4 4 3
LAN
pres pres pres pres pres pres pres
CANBus
Other
Dip switch for address set pres pres pres pres pres pres pres
bayonet + bayonet + bayonet + disconnectable +
Connections disconnectable disconnectable disconnectable
screw screw screw screw
Connection kit DWEX60-30KIT DWX115-30KIT DWEX70-30KIT IP-FCEX60 IP-FCX215 IP-FCEX70 DWEX306-30KIT

IPX106D - IPX206D - IPX306D IPX115D - IPX125D - IPX215D - IPX225D

IPX306D

114 GENERAL PURPOSE PROGRAMMABLE CONTROLLERS

CONNECTIVITY MODULE iProLINK

Programmable connectivity module designed to collect, store, process, and manage data. It is
IPL500D compatible with the iPro controllers and allows downloading of applications for data processing
or management of other integrated devices

D: 4 DIN Rail

FEATURES IPL500D
Power supply 24Vac/dc from TF20D

Outputs
RS485 slave
USB pres
LAN/RS485 master pres
CANBus pres
Ethernet pres
Other
Remote keyboard VGIPG
Internal modem GPRS opt
Real time clock pres
Flash memory 128MB
Connections screw
Connection kit IP-FC500
BACnet protocol opt

XWEB SUPERVISING
SYSTEMS INTERNET/INTRANET

EXPANSIONS LOCAL/REMOTE PC
et
Mod

Ethern

ROOM PROBE
BUS

temperature, humidity,
CA
EEV DRIVER dew-point
et

NB
Slav

rn

us
he

/L
ModBUS
Et

AN
e

er
CAN
Bus/ M ast
LAN
dB US
Mo

RS485/Ethernet ModBUS Master

TGIPG Internal Web server CONTROLLERS

GPRS connectivity Mo
dBU
SMS and e-mail sending SM
aste
r

BACnet
VISOGRAPH TIME-THERMOSTAT
Ethern
Bus
CAN

et

USB INTERNAL GPRS

MODEM

IPRO IPRO
CONTROLLERS CONTROLLERS

GENERAL PURPOSE PROGRAMMABLE CONTROLLERS 115

VISOGRAPH LCD GRAPHIC DISPLAY

VGIPG Graphic display fully programmable (via VISOPROG or through USB from the iPro) for iProGENIUS
controllers with LCD graphic display with 240x96pixels

VG: 82x156mm

FEATURES VGIPG
Power supply from controller
Visokey output pres
Buzzer opt

• Great versatility and extensive customization opportunities

• Complete integration with ISaGRAF® projects
• UNICODE character compatible
• Quick panel or wall mounting
• Up to 2 keyboards connectable with iPro controllers
• Maximum distance from the controller: 150m

VISOPROG

VISOPROG allows the creation of graphic interfaces for VISOGRAPH

keyboards, VGIPG model. The program installed on a PC is
connected to the ISaGRAF® project with a basic interface that can
be easily customized based on the user’s needs. VISOPROG allows
a direct transfer of the user interface from PC to a keyboard. The
image on the right shows an operative VISOPROG screen with the
relative VISOGRAPH final interface

ACCESSORY
VISOKEY
Programming kit for Visograph keyboards

116 GENERAL PURPOSE PROGRAMMABLE CONTROLLERS

GENERAL PURPOSE TOUCH SCREEN
DISPLAYS
SECTION INDEX
FUNCTIONS MODELS

TGIPG – high programmability 118

Programmable touch screen displays TGIPG 120
Accessories TF-TGIPG – CAB/485-TGIPG
CAB/WEB/PC 120

GENERAL PURPOSE TOUCH SCREEN DISPLAYS 117

 TGIPG: 228x280mm
10,4” 7”
TGIPG: 143x204mm
TGIPG: 104x145mm
4,3”
TGIPG SERIES: HIGH PROGRAMMABILITY

To make easier, more intuitive and complete communication with their controllers, Dixell introduces the innovative family
(TGIPG) of TFT touch screen displays, characterized by its aesthetic value and fast Ethernet/Internet connectivity.
The versatile and compact line, exceptional hardware performances, advanced functionalities, and a large number of symbols
and templates makes the TGIPG family the perfect solution for HVAC/R needs. The easy programming mode and the use of a
graphic editor make the creation of a user interface quick and easy.

• Powerful platform based on ARM9 (400MHz) microprocessor, RAM memory 64MB (DDR2), data storing on FLASH memory
128MB SSD and on external card SD
• Connection with Dixell controllers via RS485 or Ethernet
• Remote connection (via Internet)
• USB for mouse, printer and application update
• TFT-LCD display – 16.7 million colors (true color), LED backlight
• Solid and elegant silver housing
• IP65 front protection
• Advanced graphic (vector) features
• Ability to create a fast, custom synoptic overview of the unit
• Complete alarm management
• Built in data logger
• Runtime graphics
• Multilanguage management with automatic translation via Internet
• Simulation mode to check applications on PC
• 1A max power absorption

HOW to ORDER

TGIPG T G I P G - A 0 0 0 0

A
Version
0 = 4,3”
2 = 7”
3 = 10,4”

118 GENERAL PURPOSE TOUCH SCREEN DISPLAYS

CONNECTIVITY
Touch screen displays of the TGIPG line with multiple ports, are characterized by high connectivity both local and remote to satisfy every application need.

Power supply Ethernet output SD card

Serial output Serial output USB

COM1/COM2 COM3/COM4

LOCAL REMOTE

RS485/ETHERNET

INTERNET

TGIPG
85
RS4

SOFTWARE
The TGIPG family is characterized by quick and easy graphic editor that allows for faster creation of applications. The integrated guideline functions, with its
large number of symbols and templates, combined with the ability to manage high resolution images allows complex interfaces to be easily created while at the
same time being complete, intuitive, and appealing. Effective language management through a dedicated menu and automatic translation via the Internet are
among the many strengths of the touch screen line. Below is an example of a “final screen” and an example of a “variables configuration window”.

GENERAL PURPOSE TOUCH SCREEN DISPLAYS 119

TGIPG PROGRAMMABLE TOUCH SCREEN DISPLAYS

TGIPG Programmable TFT touch screen displays

TGIPG: 228x280mm TGIPG: 143x204mm TGIPG: 104x145mm

FEATURES TGIPG v. 4,3” TGIPG v. 7” TGIPG v. 10,4”

Power supply 24Vdc 24Vdc 24Vdc
Format 16:9 16:9 4:3
Display 480x272pixels 800x480pixels 640x480pixels
Ethernet output pres pres pres
Serial output 2 x RS485/232/422 2 x RS485/232/422 2 x RS485/232/422
USB output pres pres pres
Buzzer (beeps when pressed) pres pres pres
Real time clock pres pres pres

ACCESSORIES
TF-TGIPG CAB/485-TGIPG CAB/WEB/PC
Power supply 24Vdc/1A for TGIPG Cable for RS485 connection Ethernet patch cross over cable, 1m
with connector for TGIPG

120 GENERAL PURPOSE TOUCH SCREEN DISPLAYS

SYSTEMS
SECTION INDEX
FUNCTIONS MODELS

GLOBAL RETAIL SOLUTION 122

XWEB300D - alarm management and controlling 124
Alarm and controlling web server XWEB300D 124
XWEB500 - XWEB500D - monitoring and controlling 126
Monitoring and controlling web server XWEB500 - XWEB500D 126
XWEB3000 - industrial monitoring and controlling 128
Industrial monitoring and controlling web server XWEB3000 128
XWEB5000 - monitoring, controlling and supervising 130
Monitoring, controlling and supervising web server XWEB5000 130
XWEB FUNCTIONS 132
XWEB CONNECTIONS 134
XWEB SYSTEM GUIDE 136
iCOOLL - wireless solution 137
TX/RX modules for wireless network XJ200 137
Accessory PW200J 137
XJM - I/O management 138
Multifunction module for inputs and outputs XJM60D 139
Keyboard for XJM controller VJM60 139
XJA-XJP-XJR - relay and acquisition management 140
Alarm/status acquisition modules XJA50D - XJA50SL 141
Probe and alarm data acquisition modules XJP30D - XJP40D - XJP60D 141
Relay module XJR40D 141
Keyboard for XJA-XJP-XJR controllers KB1 PRG 141
Accessory CAB/KB11 141
XCENTER - centralized management 142
Centralized management software for Call Center XCENTER 142

SYSTEMS 121
 GLOBAL RETAIL SOLUTION

Research, great experience, regulation and design innovation: these are the elements that allow Dixell to offer controllers and
supervising systems that are in the forefront for all refrigeration applications, cooking and air conditioning fields. A series of
specific solutions and a comprehensive range that extends from Thermometers to Multifunction Controllers, from Supervising
Systems to the Call Centers, for a completely centralized plant.
In particular, Dixell’s systems are a range designed to satisfy all quality, user friendliness and efficiency requirements for every
kind of application.
Dixell, with its systems, integrates and coordinates all components of system regulation in order to optimize the efficiency and
to increase energy savings.

APPLICATIONS
PETROL STATIONS SUPERMARKETS PRODUCTION PLANTS
STORAGE CENTRES HYPERMARKETS INDUSTRIES

ENERGY SAVING

ModBUS

AIR CONDITIONING LIGHTING

iCOOLL XJ200
REFRIGERATION

122 SYSTEMS
Some of Dixell’s instruments that allow this are:
• the innovative suction pressure management of compressor rack’s through CRO
• the dew point check and the modular management of anti-sweat heaters
• the load supervising and the electric consumption peak management

In addition the typical functions of a monitoring system:

• the temperature recording according to HACCP regulations
• the transmission and management of regulation and plant alarms

Results prove that Dixell systems are in synergy with all regulation components ensuring:
• better performance
• greater efficiency
• a complete local and remote monitoring
• maximum environmental preservation

XCENTER, the centralized management software ideally suited for a modern and organized Call Center, completes the range of
products. A powerful and affordable instrument that allows a remote plant monitoring.

SYSTEMS CALL CENTER

XWEB5000

XWEB3000

XWEB500 - XWEB500D

XWEB300D

SYSTEMS 123
 D: 10 DIN Rail

XWEB300D: ALARM MANAGEMENT and CONTROLLING

It is extremely well suited for 6 or 18 device installations such as petrol stations, mini-market, small storage centres. A simple DIN
Rail mounting (4 DIN) and the absence of local user interface make the XWEB300 the ideal solution for the remote assistance
(via modem) to the plant. Local or remote connection from PC is made without the need for special software, only standard
web browser (Microsoft Internet Explorer® or Firefox®) software is needed; the information is displayed as Web pages. The
competitive price lets you to use this Web Server in applications with a only a single regulator such as compressor rack and
medical close control.

• Data capture and alarm monitoring WEB server connectable to Dixell’s controllers with serial output or to others
ModBUS-RTU compatible devices
• XWEB is a 10DIN Rail module for easy DIN Rail mounting (DIN) directly inside the machine board or wall mounting with
brackets
• Quick and easy connection to Web pages with dedicated interface for PDA/Smartphone
• Possibility to see and modify the parameters of the connected devices remotely
• Complete and simplified analysis of the unit functioning thanks to a powerful tool that allows viewing data in graphical
format (Excel®)
• One year of stored data inside the XWEB memory (one year of stored data with 15min sampling time for 6 or 18
controllers)
• XWEB is always accessible even with isolated installations using the built-in GPRS connectivity (optional)
• Access to customized functions
• Data export on USB pendrive
• Alarm sending via FAX, SMS or e-mail
• 15VA max power absorption

HOW to ORDER

XWEB300D X W E B 3 0 0 D - A B 0 0 E

A B E
Power supply N° of instruments Internal modem
2 = 24Vac B=6 0 = No
8 = 110÷230Vac F = 18 1 = Analogue
2 = GSM/GPRS

124 SYSTEMS
XWEB300D checks the unit and, in case of malfunction alarm, it notifies the assistance center through
FAX, SMS or e-mail. It allows OEM’s via direct control to decide to engage a local service call out only if
necessary. XWEB300D can also record all data relevant to the function of the controlled unit and insert
them into a table. In this way the OEM has important information for new models for improvement of
the unit itself.

Thanks to LAN port, the connection (also via internet) to the XWEB300D is easy and safe and no special
software is required. It is possible to see all the variables of a controller and to manage of all parameters
and alarms. With Java Applet it is possible to generate comprehensive visual graphs.

FEATURES XWEB300D
Power supply 24, 110÷230Vac
LAN output pres
USB output pres
RS485 output pres
Relay output 1 config
Sampling time from 1 to 60 minutes
External modem analogue or GSM
Internal modem analogue or GSM/GPRS opt

HARDWARE

Fuse Antenna for SIM holder

GSM/GPRS modem

USB socket for external

data unit connection

RJ45 connector
for ethernet
RS485
socket Internal modem line
connector
Power supply
connector
Port for external modem
connection
Configurable External modem socket
relay if present

More information about functions and connections at pages 132÷136

SYSTEMS 125
 D: 10 DIN Rail

210x230mm

XWEB500-XWEB500D: MONITORING and CONTROLLING

It is extremely well suited for medium installations up to 36 or 100 devices, such as petrol stations, supermarkets or storage
centers. Its innovative and useful features make the instrument suitable for medium-large applications such as production and
storage goods centers. Thanks to its two available formats, it can be installed whether on DIN Rail or wall or panel mounting, but
can also be used as desk instrument. Local or remote connection from a PC is made without the need of special software, only a
standard web browser (Microsoft Internet Explorer® or Firefox ®) software is needed; the information is displayed as Web pages.

• Data capture and alarm monitoring WEB server connectable to Dixell’s controllers with serial output or to others
ModBUS-RTU compatible devices
• Ability to operate in stand alone mode thanks to the local display and keyboard (XWEB500)
• Easy DIN Rail mounting (DIN) directly inside the machine board or wall mounting with brackets (XWEB500D)
• Quick and easy connection to Web pages with dedicated interface for PDA/Smartphone
• Possibility to see and modify the parameters of the connected devices remotely
• Complete and simplified analysis of the unit functioning thanks to a powerful tool that allows to view data in graphical
format (Excel®)
• One year of stored data inside the XWEB memory (one year of stored data with 15min sampling time for 36 or 100
controllers)
• XWEB500D is always accessible even with isolated installations using the built-in GPRS connectivity (optional)
• Layout for netsurfing of web site in graphic format
• Data export on USB pendrive
• Performance Meter for cooling demand control
• Alarm sending via FAX, SMS or e-mail
• 15VA max power absorption for XWEB500D and 20VA max for XWEB500

HOW to ORDER

XWEB500 X W E B 5 0 0 - A B 0 0 E

XWEB500D X W E B 5 0 0 D - A B 0 0 E

A B E
Power supply N° of instruments/CRO Internal modem
2 = 24Vac (for XWEB500D) H = 36/no 0 = No
4 = 110Vac (for XWEB500) N = 50/CRO (1 engine) 1 = Analogue
5 = 230Vac (for XWEB500) T = 100/no 2 = GSM/GPRS (for XWEB500D)
8 = 110÷230Vac (for XWEB500D)

126 SYSTEMS
FEATURES XWEB500 XWEB500D
Power supply 110, 230Vac 24, 110÷230Vac
LAN output pres pres
USB output 2 1
RS485 output pres pres
Relay output 3 3
Digital input pres pres
Sampling time from 1 to 60 minutes from 1 to 60 minutes
External modem analogue or GSM analogue or GSM
Internal modem analogue opt analogue or GSM/GPRS opt

HARDWARE

Alarm 1 Alarm 2 System USB socket for external RJ45 ethernet

output relay output relay alarm relay data unit connection connector

Power supply
connector Internal modem
line connector

Modem Digital RS485 USB socket for PC External modem

reset relay input socket connection socket

Digital input
Fuse Antenna for SIM holder
GSM/GPRS modem

USB socket for external

data unit connection

RJ45 connector
for ethernet
RS485
socket Internal modem
line connector
Power supply
connector
Port for external
Alarm 1 output relay Alarm 2 output relay System alarm relay External modem socket modem connection
if present

More information about functions and connections at pages 132÷136

SYSTEMS 127
 370x238mm

XWEB3000: INDUSTRIAL MONITORING and CONTROLLING

It is extremely well suited for larger installations with up to 247 devices such as supermarkets, hypermarkets or large storage and
distribution centers as well as production and storage goods processing such as fast-food, restaurants, catering up to medical
and pharmaceutical applications. XWEB3000 is the ideal solution for service needs (modem, ethernet and internet connection);
it can operate, as a stand-alone server without using a PC but it’s also simple to connect a monitor, keyboard and mouse. Local
or remote connection from a PC is made without the need of special software; only a standard web browser (Microsoft Internet
Explorer® and Firefox ®) software is needed.

• Data capture and alarm monitoring WEB server connectable to Dixell’s controllers with serial output or to others
ModBUS-RTU compatible devices
• 19” RACK or desk mounting
• Quick and easy connection to Web pages with dedicated interface for PDA/Smartphone
• All controller values can be shown using a special “Single View” window or using “Run Time” window where many controllers
can be viewed at the same time. It is even possible to use a “Layout” view of the plant with pictures and schematics
drawings
• Complete and simplified analysis of the unit functioning thanks to a powerful tool that allows to view data in graphical
format (Excel®)
• One year of stored data inside the XWEB memory (one year of stored data with 15min sampling time)
• Easy plant management by means of the “Scheduler” to send commands according to a custom calendar
• Calendar function and internal RTC both for alarm transmission to the “in charge” service and command sending to the
controllers
• Possibility to divide the controllers set in different categories of products with their own sampling time
• Ability to select particular data on which to perform the monitoring with reduced sampling time
• Alarm sending via FAX, SMS or e-mail
• Commands sending activation through digital input
• Standard communication protocol ModBUS-RTU
• 50VA max power absorption

HOW to ORDER

XWEB3000 X W E B 3 0 0 0 - 6 0 0 0 E

E
Internal modem
0 = No
1 = Yes

128 SYSTEMS
Easy configuration, efficient management of all controller values and a display of controllers also
using pictures and schematic drawings: these are some of the XWEB3000’s strengths. It is an intuitive,
powerful and at the same time, very versatile device. This web server allows parameter and alarm
management with different levels and typologies, providing the user with the possibility to divide the
controllers into different categories, each with their own sampling periods. Powerful tools include: the
scheduler which is a graphic instrument created to manage commands sent to the controllers, data
export used to save data in a Microsoft Excel file, and the back-up function to have data-safe protection
even in the worst environmental usage, also to save all the unit setup.
The alarm signalling for service is very flexible and can be done through FAX, e-mail, SMS and also via
relay outputs.

FEATURES XWEB3000
Power supply 110÷230Vac
LAN output pres
USB output 2
RS485 output pres
Relay output 3
Digital input pres
Printer output 25 pin
Keyboard/mouse output pres
Video output pres
Sampling time from 1 to 255 minutes
External modem analogue
Internal modem analogue opt

HARDWARE

Power supply Alarm 1 Alarm 2 RS485 socket Printer USB socket for
connector output relay output relay connection external data unit connection

System Digital Internal modem RJ45 ethernet External modem Keyboard/mouse Monitor
alarm relay input line connector connector socket socket connection

More information about functions and connections at pages 132÷136

SYSTEMS 129
 370x238mm

XWEB5000: MONITORING, CONTROLLING and SUPERVISING

It is provided with a powerful supervision engine suited for larger installations (with up to 247 devices) in the refrigeration,
conditioning and building automation field, where it is necessary to program several different interactive actions that the
controller has to perform. It is extremely well suited to hypermarkets, large storage and distribution centres, as well as production
and storage goods processing and is ideal for the large service center (modem, ethernet and internet connection). The system
manages the alarm transmission to the “in charge” service (via FAX, e-mail, SMS and also through relay outputs) and it can also
work without a PC using direct connection of a monitor, keyboard and mouse. Local or remote connection PC is made using
Microsoft Internet Explorer® and Firefox® browser.

• Monitoring, controlling and supervising web server connection to Dixell’s controllers with serial output and to other
ModBUS-RTU compatible devices
• 19” RACK or desk mounting
• Built-in editor with local and field simulator
• Quick and easy connection to Web pages with dedicated interface for PDA/Smartphone
• All controller values can be displayed using a special “Single View” window or a “Run Time” window with many controllers
viewed at the same time. The ability to use a “Layout” view of the plant with pictures and schematic drawings is also an
option
• Complete and simplified analysis of the unit functioning thanks to a powerful tool that allows to view data in graphical
format (Excel®)
• One year of stored data inside the XWEB memory (one year of stored data with 15min sampling time)
• Easy plant management by means of the “Scheduler” to send commands according to a custom calendar
• Calendar function and internal RTC both for alarm transmission to the “in charge” service and command sending to the
controllers
• Possibility to divide the controllers set in different categories of products with their own sampling time
• Ability to select particular data on which to perform the monitoring with reduced sampling time
• Alarm sending via FAX, SMS or e-mail
• Commands sending activation through digital input
• Standard communication protocol ModBUS-RTU
• 50VA max power absorption
• DPC (Dew Point Control) for anti-sweat heater management

HOW to ORDER

XWEB5000 X W E B 5 0 0 0 - 6 0 0 0 E

E
Internal modem
0 = No
1 = Yes

130 SYSTEMS
SUPERVISING
With XWEB5000 it is possible to intercept sending commands to monitored
devices. The installer can create a supervision “Project” (or several “Projects”)
by programming links between the input variables (inputs, status and
outputs of a controller) and defining what actions the system must take
when these conditions are met. Unlike a standard PLC, where the user is
required to know a specific programming language, with the XWEB5000
the “project” can be easily created using a simple graphic user interface,
but more importantly, without the need to learn a complex programming
language. Specific software is not necessary: the supervising software has
been written in JAVA and it runs on the client PC. The project is saved to the
XWEB5000; several projects can be run simultaneously.

AUTOMATION
The high versatility and programmability allow the XWEB5000 to perform automation programs. In fact it’s possible, for example, to manage the use of plant
lights, internal or external signs, the battery charge/discharge as fork lifts, increasing the energy saving process. In case of compressor fault or when the
absorption threshold exceeds the set, etc., the monitoring unit can automatically interact with the rest of system.

FEATURES XWEB5000
Power supply 110÷230Vac
LAN output pres
USB output 2
RS485 output pres
Relay output 3
Digital input pres
Print output 25 pin
Keyboard/mouse output pres
Video output pres
Sampling time from 1 to 255 minutes
External modem analogue
Internal modem analogue opt

HARDWARE

Power supply Alarm 1 Alarm 2 RS485 socket Printer USB socket for
connector output relay output relay connection external data unit connection

System alarm Digital Internal modem RJ45 ethernet External modem Keyboard/mouse Monitor
relay input line connector connector socket socket connection

More information about functions and connections at pages 132÷136

SYSTEMS 131
XWEB FUNCTIONS
An overview of some most important XWEB family functions.

RS485 LINE-CHECK
A powerful new tool is able to check performance and statistical data for each
controller by carrying out a functional test for every device connected to the
RS485 network. You can then have information regarding the quality of the
connection. The tool is very useful especially when there is the necessity analyze
a network problem; with statistics that allow you to easily identify which
instrument has a connection problem.

PARAMETER PROGRAMMING and RUN TIME

Thanks to the XWEB the user has an intuitive, powerful and versatile
device all in one that allows modification of various functioning
parameters of the instruments. It will no longer be necessary to
make manual adjustments on the controller, because by using the
different windows available, and with a few simple operations, it
is possible to obtain the required updating. The Run Time function
displays many devices together in a unique window. This is dynamic
page and the data showed is updated in real time. The status of the
devices connected (also from different manufacturers) is displayed
simply and clearly and it is possible to modify the various functioning
parameters of the instruments.

DATA EXPORT
It is possible to export all data information in a Microsoft Excel® file. The user
can later use this information to build graphs or to collect data. It is possible to
select a data interval and filter between different controllers.

LAYOUT & GLOBAL COMMANDS

(for XWEB500D, XWEB500, XWEB3000, XWEB5000)
A powerful graphic editor that doesn’t require the installation of any additional
software on your PC is what makes XWEB layout the ideal solution. Using this
function, the user can access all the recorded data of the controllers and even
send a command to a controller. Global Commands option let you send multiple
commands to one or more controllers at the same time. In addition, using the
digital input it is possible to automatically start the sending of commands.

132 SYSTEMS
 SCHEDULER
(for XWEB500D, XWEB500, XWEB3000, XWEB5000)
The scheduler is a powerful graphic tool to manage commands sent to the
controllers. You can quickly see an overview of all daily activity. This means that
energy saving routines and defrosts can be easily scheduled.

PERFORMANCE METER
(for XWEB500D, XWEB500, XWEB3000, XWEB5000)
This highly appreciated function allows users to verify the right temperature for
single devices (wall cabinets, benches, rooms, and more). The graphical layout offers a
complete view of the plant operating mode.

GRAPHICS
(for XWEB300D, XWEB500D, XWEB500, XWEB3000, XWEB5000)
CIRCULAR GRAPHICS
(for XWEB3000, XWEB5000)
The XWEB can supply powerful graphs that areable to represent multiple
analoge variables on the same pictorial system and the course of the status of
the outputs and alarms. This allows the user to have a precise snapshot view
of important variables for easy diagnosis of faults. Thanks to the high sampling
rate of circular graphs, they are more detailed and appreciated by service
personnel for diagnostics.

CRO
(for XWEB500D, XWEB500, XWEB5000)
Thanks to the special CRO algorithm (Compressor Rack Optimization), the Fixed Dynamic
connection to the modern supervising systems (of Dixell) allows the management set point set point

of the compressor rack set point in the best possible way, depending on the
devices connected, which can result in plant optimization and energy savings.
The system, equipped with the CRO function, analyzes the information from the
bar
controller to determine if a controller needs more refrigeration power and how
much. The set point will be recalculated in order to satisfy the worse instance and
sent from the supervising system to the XC1000D compressor rack controller;
this will be the new working set point. If the supervising system can’t manage Set point
Time
the XC1000D, it’s the controller that “decides” to replace the set point (coming
from the system) and will then re-define the set point in the planning phase of KWatt

a refrigeration plant. The two graphs emphasize that when the CRO algorithm Consumption
is active, in a real installation, the set point becomes on average higher, and
consequently the energy consumption decreases. The dotted line represents the Time
average weekly value.
CRO ON

SYSTEMS 133
XWEB CONNECTIONS
The high connectivity is one of the main XWEB family’s strengths; see below for an overview of several methods to connect with the systems.

CONNECTION via SMARTPHONE/PDA

When the connection is made by means of a Palmtop computer
(PDA), the XWEB automatically recognizes it and makes several
dedicated pages available. It is possible to display all the values of a
device and send it commands on the PDA.

LOCAL CONNECTIONS
XWEB server and associated systems can be locally linked connecting the system to a PC.

XWEB300D
RS485 network XWEB500D
XWEB500
XWEB3000
XWEB5000

The complete and powerful hardware platform typical of XWEB3000 and XWEB5000 systems allows them to be used as the local machine by way of monitor,
keyboard and mouse connection.

MONITOR

KEYBOARD

XWEB3000
XWEB5000
MOUSE
RS485 network

134 SYSTEMS
REMOTE CONNECTIONS
XWEB Servers can be remotely accessed using several methods:
• by modem with point to point connection, also with GSM modem (only for devices that support it);
• by link in local Ethernet network, by means of standard net connector RJ45;
• by direct Internet connection, if provided with a public and static IP address.

Fax

INTERNET
Also GPRS (opt)
MODEM for D format E-MAIL
(int/ext)

XWEB modem

XWEB300D ETHERNET E-MAIL

RS485
XWEB500D SMS
network
XWEB500
XWEB3000
XWEB5000

Router

REMOTE
CONNECTION
INTRANET (via standard Browser)

The GPRS connectivities are a popular favorite, which distinguishes it as a best-solution in case of alarm management with medium-small applications, and the
ETHERNET in case of tele-assistance and contron with medium-large applications.

E-MAIL
SMS

GPRS

Ethernet

SYSTEMS 135
XWEB SYSTEM GUIDE
XWEB300D XWEB500D XWEB500 XWEB3000 XWEB5000

Applications small and medium medium and large medium and large large large with supervision

Format 10 DIN Rail 10 DIN Rail 210x230x87h 350x235x47h 350x235x47h

Power supply 24Vac or 110÷230Vac 24Vac or 110÷230Vac 110Vac or 230Vac 110÷230Vac 110÷230Vac

Display •

N° of instruments 6 - 18 36 - 100 100 247 247

USB port for PC connection •

USB output for device

• • • • •
connection

Relay output 1 3 3 3 3

Digital input • • • •

LAN output • • • • •

RS485 output • • • • •

External modem analogue or GSM analogue or GSM analogue or GSM analogue analogue

analogue or analogue or
Internal modem analogue opt analogue opt analogue opt
GSM/GPRS opt GSM/GPRS opt

Sampling time from 1 to 60 minutes from 1 to 60 minutes from 1 to 60 minutes from 1 to 255 minutes from 1 to 255 minutes

RS485 line check • • • • •

Parameter programming • • • • •

Run time function • • • • •

Data export in Excel®

• • • • •
format

Graphics • • • • •

Layout function • • • •

Scheduler function • • • •

Global commands • • • •

Performance meter • • • •

Circular graphics • •

Supervision module •

CRO module • • •

136 SYSTEMS
 80x80mm

iCOOLL SERIES: WIRELESS SOLUTION

• TX/RX modules (XJ200) for wireless network dedicated to data monitoring (the master module has to be connected to the
XWEB, the slave modules are connected to the instruments through the ModBUS protocol)
• Self-configuring MESH system for the optimization of communication (the network is able to create and to use all possible
“connections” between the master and the slave node)
• User-friendly and less installation time and costs
fig. 1
• Operating frequency: 868Mhz (922Mhz for US market – FCC approved)
• High range (450m no obstacles)
• Ability to connect up to 240 instruments to the same XJ200
• Ability to manage up to 20 HOP
• Ability to connect up to 40 XJ200 to the same net
• 1,5m wire (power supply/RS485) with functional bracket included (fig. 1)
• Standard communication protocol ModBUS-RTU
• 0,25VA max power absorption

HOW to ORDER

XJ200 X J 2 0 0 - A 0 0 0 0

A
Frequency
0 = 868Mhz
1 = 922Mhz

ACCESSORY
PW200J
Power supplier for XJ200 modules with TTL-RS485 converter

SYSTEMS 137
 100x64mm

D: 4 DIN Rail

XJM: I/O MANAGEMENT

• Acquisition and command module for refrigeration, air conditioning and BMS applications
• Great flexibility: all the necessary I/O types in one device
• Configurable analog inputs
• Data acquisition by means of sensors with alarm limits
• Up to 12 digital inputs for alarms, status and sensors interlock
• Pressure/temperature conversion
• Available with or without display
• Hot Key or Prog Tool Kit connector for quick and easy programming
• Serial connection to monitoring systems or BMS
• 20VA max power absorption
• Dual display with red LED (8,5mm high) and yellow LED (7,5mm high) and 17 icons

TYPICAL APPLICATIONS
Retrofit and data acquisition for:
Cabinets
Cold rooms with 2 evaporators
Compressor racks up to 4 compressors
Pulses counters

HOW to ORDER

XJM60D X J M 6 0 D - A B C 0 0

VJM60 V J M 6 0 - 0 0 0 0 0

A B C
Power supply Display N° of relay
2 = 24Vac 0 = No 1=1
4 = 110Vac 1 = Yes 4=4
5 = 230Vac

138 SYSTEMS
MULTIFUNCTION MODULE and KEYBOARD for INPUT and
OUTPUT MANAGEMENT XJM

XJM60D Multifunction module for inputs and outputs with management of up to 4 relays

VJM60 Keyboard for XJM60D module

D: 4 DIN Rail 100x64mm

FEATURES XJM60D VJM60

First display: n° digits 4 d.p. 4 d.p. 4 d.p.
no display no display
Second display: n° digits 4 d.p. 4 d.p. 4 d.p.
Power supply 24Vac 24Vac 110, 230Vac 110, 230Vac from controller
Inputs
Probe
6 x config* 6 x config* 6 x config* 6 x config*
Digital (free of voltage)
Digital (power supply voltage) 6 6 2 2
Relay outputs
Configurable 1 x 5A, 4 x 5A 1 x 5A, 4 x 5A 1 x 5A 1 x 5A
Other
Hot Key/Prog Tool Kit pres pres pres pres
Remote keyboard VJM60 VJM60
Analog output 4÷20mA/0÷10V 4÷20mA/0÷10V 4÷20mA/0÷10V 4÷20mA/0÷10V
Serial output RS485 RS485 RS485 RS485

* Up to 6 digital inputs or 6 x NTC/PTC/Pt1000 probe inputs or 3 x NTC/PTC/Pt1000 probe inputs + 3 x 4÷20mA/0÷5V/0÷10V/pulse probe inputs

XJM60D

SYSTEMS 139
 D: 4 DIN Rail

100x64mm

XJA-XJP-XJR SERIES: RELAY and ACQUISITION MANAGEMENT

• Digital inputs for local enable/disable of relays (XJR)

• Data acquisition modules suitable for collecting data from any kind of installation (XJP)
• Up to 6 inputs for NTC, PTC, 4÷20mA and 0÷10V and 3 digital inputs or 4 Pt100 inputs and 4 digital inputs (XJP)
• Up to 10 line voltage inputs (XJA)
• Direct line power supply 230 (110)Vac. No external transformer required
• Remote display option
• Hot Key or Prog Tool Kit connector for quick and easy programming
• Serial connection to monitoring systems
• 6VA max power absorption

HOW to ORDER

XJR X J R 4 0 D - A 0 C 0 0

A C
Power supply Buzzer
2 = 24Vac 0 = No
4 = 110Vac 1 = Yes
5 = 230Vac

XJA-XJP30/60 X J D - A B C D E

XJP40 X J P 4 0 D - A B 0 R 4

XJA50SL X J A 5 0 S L - A 0 0 0 0

A B C D E
Power supply Measurement unit Alarm relay Probe inputs Digital inputs
2 = 24Vac C = °C 0 = No P = PTC 3 = 3 (only for XJP30/60D)
4 = 110Vac F = °F 1 = Yes (only for XJA50D) N = NTC 5 = 5 (only for XJA50D)
5 = 230Vac N = No temperature A = 4÷20mA 6 = 6 (only for XJP30D)
W = 0÷10V
0 = No

140 SYSTEMS
a
KEYBOARD and RELAY MODULES and PROBE and
ALARM ACQUISITION MODULES XJA-XJP-XJR
XJA50D Alarms/status acquisition modules able to read up to 5 + 5 independent inputs (master + slave)
XJA50SL
XJP30D
XJP40D Probes and alarms data acquisition modules able to read up to 9 different inputs
XJP60D
XJR40D Relay module able to manage up to 4 independent outputs

KB1 PRG Programming keyboard for XJA50D - XJP30D - XJP40D - XJP60D - XJR40D modules D: 4 DIN Rail 100x64mm

FEATURES XJA50D XJA50SL XJP30D XJP40D XJP60D XJR40D KB1 PRG

Display: n° digits ± 3 d.p.
Keyboard: push buttons 4 6
Power supply 24, 110, 230Vac from controller 24, 110, 230Vac 24, 110, 230Vac 24, 110, 230Vac 24, 110, 230Vac from controller
Inputs
3 x NTC, PTC, 6* x NTC, PTC,
Analogue 4 x Pt100
4÷20mA, 0÷10V 4÷20mA, 0÷10V
Digital (power supply voltage) 5 5 3 4 3
Digital (free of voltage) 3 opt 3* 4
Relay outputs
Alarm 5A opt
Load 4 x no 8A/nc 5A
Other
Hot Key/Prog Tool Kit output pres pres pres pres pres
Remote display/keyboard output X-REP/KB1 PRG X-REP/KB1 PRG X-REP/KB1 PRG X-REP/KB1 PRG KB1 PRG
Serial output RS485 RS485 RS485 RS485 RS485
Serial addresses 5 5 3 4 6 1
Buzzer opt

* XJP60D has 3 analogue inputs that are configurable as free of voltage digital inputs

XJA50D XJA50SL XJP30D

XJP40D XJP60D XJR40D

ACCESSORY
CAB/KB11
1m cable to connect the keyboard
to the XJA-XJP-XJR modules

SYSTEMS 141
 XCENTER: CENTRALIZED MANAGEMENT

Designed and developed in order to monitor plants that are positioned in different zones, XCENTER is a flexible, reliable and
user-friendly software package. Efficient assistance is a widespread requirement among distribution centers, small and large
supermarkets, industrial plants, and more. XCENTER gives this type of support with alarm management, continuous device
checks, and recipient management with functional reports. XCENTER doesn’t have limits regarding the number of plants and
controllers that can be checked and is suitable for every kind of requirement.

• Modular software that, when installed in a server PC, communicates with clients (XWEB systems and remote PC)
• Data and alarms files from real installations, available for all clients
• User interface is simple to understand
• Multilanguage management
• Geo-location positioning and controllers status
• Command sending to real instruments via XWEB interface
• Possibility to quickly modify controllers parameters via XWEB interface
• Alarm setup and management
• Alarm report via e-mail – SMS
• Recipient list management
• Statistical data management in graphical format
• Connection between XCENTER and the monitoring units are by means of internet or telephone line (via dial-up or an
internet provider)
• Open project that allows add-on software (warehouse and accountant management,…); development on request

HOW to ORDER

XCENTER X C E N T E R - A B 0 0 0

A B
N° of server N° of client
0=0 N=0
A=1 B=2
L = 10

142 SYSTEMS
The XCENTER SOLUTION

Statistic
Applications Keep alive test
management
(Supermarkets,
Distribution
Add-on modules
centres,...)
Centralized on demand

Alarm and historical management Alarm resent

data sending software to service personnel

The XCENTER software is composed of two parts.

• XCENTER Server is a server application that manages the Oracle© database and the communication to all connected XWEB controllers. It contains all
receiving and sending notifications of alarms, user management, and control signals.

• XCENTER Client is the operator interface that is connected to the XCENTER Server and gives a list of alarms, statistics, and configuration tools of all plants
monitored by the XWEB family and their web pages by means of the integrated browser. XWEB gives quick access to the monitored controllers with their
parameters, commands, and historical data giving a prompt reply about actual conditions or environment with the ability to intervene remotely to solve
possible critical situations.

XCENTER INSTALLATION LAYOUT

INTERNET

sYstemS

Access via LOCAL PC

SERVER

Access via REMOTE PC

E-MAIL
Access via LOCAL PC
SMS

SYSTEMS 143
 CONTACTS
XCENTER uses a list of recipients to be contacted for local, regional and
national events. Based on need, and according to the alarm severity, the
right person will be alerted.

ALARM MANAGEMENT
With XCENTER the default level of severity can be increased
according to the duration, the frequency, the time of the day.

COMMANDS and PARAMETERS

The XCENTER user is authorized to interact with the controller directly from the
program or it has the possibility to be connected to the XWEB and start using it
just like via the browser. For every alarm the software creates a report to describe
the complete history of the alarm.

GRAPHICS
Alarms are displayed together with the log of the past 48 hours of the controller
functions. It’s possible to determine and understand the kind of problem and
decide how and when intervene.

KEEP ALIVE
The “Keep Alive” function is meant to check the hardware status of the monitored installation periodically to ensure reliability of critical devices.

GEO-LOCATION
Thanks to the mapping technology, it is possible to place your installations on
a real geographic map. This feature allows the user to find information quickly
regarding any installation that sends an alarm.

STATISTICS
XCENTER is provided with several models that generate
powerful statistical tools that are used to analyze
frequent alarms, critical device installations, or sites.
The statistics are useful in preventing critical product
or plant situations. There is also the possibility to group
alarms together by typology, time interval, installation,
and more.

144 SYSTEMS
PROBES
SECTION INDEX
FUNCTIONS MODELS

TEMPERATURE PROBE 146

NTC probes NS6 – NS6W – NS6S – NS6SJ – NS6SW – NG6 – NG6F
NG6W – NG6K – NG6P – NG6PJ – NX6P – NX6PJ
NY6P – NY6PJ – NP4-67 – NT6-67 – NT6 – N6F2 146
PTC probes S6 – S6.R – S6.S –S6.SH – SA6 – ST6 – SC5.5 147
Pt1000 probes PMG5P – PMP4-67 – PMT6-67 148
NTC/Pt1000 product probes NGP0P – PMGP0P 148
PTC/NTC insert probes SPC10PS – NPC10PS – SPC10IS – NPC10IS
SPC10IA – NPC10IA 148
Pt100 thermoresistors PT6 – PT6.S – PT6.F – PT310 – PT315 149
TC thermocouples TJ6 – TK6 – TJD215 – TJD320 – TKD215 – TKD320
CMJ – CMK 149

TEMPERATURE/HUMIDITY PROBES 150

Temperature/humidity probes XH50P – XH55P 150

HUMIDITY PROBES 151

Humidity probes XH10P – XH20P 151

PRESSURE PROBES 152

Pressure transducers PP07 – PP11 – PP30 – PP50 152
Ratiometric pressure transducers PPR15 – PPR30 – PPR45 152

PROBES 145
 PROBES

TEMPERATURE PROBES
NTC PROBES
The probes with NTC thermistor are designed for applications where high accuracy and the short responce time are important. The probes pass several tests,
this is why we guarantee a very high reliability.

PROBE DESCRIPTION CABLE TEMP. RANGE

General purpose, resinated, IP67, inox steel cap “dimension PVC -30÷80°C
NS6 Ø6x30mm” 1,5m – 3,0m -22÷176°F

General purpose, resinated, IP67, with 6,3mm faston, inox PVC -30÷80°C
NS6W steel cap “dimension Ø6x30mm”, for WING K 1,5m – 3,0m -22÷176°F

General purpose, resinated, IP67, inox steel cap “dimension Silicone -40÷110°C
NS6S Ø6x30mm” 1,5m – 3,0m -40÷230°F

General purpose, resinated, IP67, 2 pole connector, inox steel Silicone -40÷110°C
NS6SJ cap “dimension Ø6x30mm” 1,5m – 3,0m -40÷230°F

General purpose, resinated, IP67, with 6,3mm faston, inox Silicone -40÷110°C
NS6SW steel cap “dimension Ø6x30mm”, for WING K 1,5m – 3,0m -40÷230°F

General purpose, over-molded, IP67, thermoplastic cap Thermoplastic -40÷110°C

NG6 “dimension Ø6x15mm” 1,5m – 3,0m -40÷230°F

General purpose, over-molded, IP67, with 2,8mm faston,

Thermoplastic -40÷110°C
NG6F thermoplastic cap “dimension Ø6x15mm”, for XT11S 12Vac
1,5m – 3,0m -40÷230°F
and 24Vac/dc

General purpose, over-molded, IP67, with 6,3mm faston, Thermoplastic -40÷110°C

NG6W thermoplastic cap “dimension Ø6x15mm”, for WING K 1,5m – 3,0m -40÷230°F

General purpose, over-molded, IP68, Hot Key connector, Thermoplastic -40÷110°C

NG6K thermoplastic cap “dimension Ø6x15mm” 1,5m – 3,0m -40÷230°F

146 PROBES
 General purpose, over-molded, IP68, cap “dimension
NG6P Ø5x20mm”
Thermoplastic -40÷110°C
1,5m - 3,0m -40÷230°F
General purpose, over-molded, 2 pole connector, cap
NG6PJ “dimension Ø5x20mm”

NX6P Thermoplastic, IP68, inox steel cap “dimension Ø6x20mm”

Thermoplastic -40÷110°C
1,5m - 3,0m -40÷230°F
Thermoplastic, IP68, 2 pole connector, inox steel cap
NX6PJ “dimension Ø6x20mm”

NY6P Thermoplastic, IP68, inox steel cap “dimension Ø6x50mm”

Thermoplastic -40÷110°C
1,5m - 3,0m -40÷230°F
Thermoplastic, IP68, 2 pole connector, inox steel cap
NY6PJ “dimension Ø6x50mm”

Pipemount fitting “Ø4÷Ø30mm in diameter”, IP67,

NP4-67 over-molded, copper sensor
Thermoplastic -40÷110°C
1,5m - 3,0m -40÷230°F
Pipemount fitting “Ø4÷Ø30mm in diameter”, IP67,
NT6-67 over-molded, thermoplastic sensor

PVC 0÷80°C
NT6 Pipemount fitting
1,5/2,0m 32÷176°F

General purpose, resinated, IP67, with 2,8mm faston,

PVC -30÷105°C
N6F2 double insulation, nylon cap “dimension Ø7x30mm”,
1,5/2,0m -22÷221°F
for XT11S 230Vac

PTC PROBES
The probes with PTC thermistor are designed for both cooling and heating applications.
The temperature range is –50÷150°C (-58÷302°F).

Probe DESCRIPTION CABLE TEMP. RANGE

General purpose, resinated, IP67, inox steel cap “dimension PVC -30÷80°C
S6 Ø6x30mm” 1,5m – 3,0m -22÷176°F

Water proof, resinated, IP67, inox steel cap “dimension PVC -30÷80°C
S6.R Ø6x40mm” 1,5m – 3,0m -22÷176°F

Silicone -50÷120°C
S6.S Water proof, resinated, inox steel cap “dimension Ø6x40mm”
1,5m – 3,0m -58÷248°F

Silicone -50÷150°C
S6.SH Heating applications, inox steel cap “dimension Ø6x40mm”
1,5m – 3,0m -58÷302°F

PVC 0÷80°C
SA6 Perforated for air, inox steel cap “dimension Ø6x30mm”
1,5m – 3,0m 32÷176°F

PVC 0÷80°C
ST6 Pipemount fitting
1,5m – 3,0m 32÷176°F

Probe fixed with threaded male, inox steel cap “dimension PVC -30÷80°C
SC5.5 Ø6x80mm” 1,5m – 3,0m -22÷176°F

PROBES 147
 Pt1000 PROBES
Pt1000 probes are suitable for all applications where the temperature is between -50÷120°C (-58÷248°F) and it is important to maintain precision over long
distances.

Probe DESCRIPTION CABLE TEMP. RANGE

Thermoplastic -50÷110°C
PMG5P Thermoplastic, resinated, IP68, cap “dimension Ø5x20mm”
1,5m - 3,0m -58÷230°F

Pipemount fitting “Ø4÷Ø30mm in diameter”, IP67, Thermoplastic -50÷110°C

PMP4-67 over-molded, copper sensor 1,5m - 3,0m -58÷230°F

Pipemount fitting “Ø4÷Ø30mm in diameter”, IP67, Thermoplastic -50÷120°C

PMT6-67 over-molded, thermoplastic sensor 1,5m -58÷248°F

PRODUCT PROBE NTC/Pt1000

The product probes with NTC or Pt1000 sensors allow the simulation and display of product temperature and manage alarms according to the temperature near
the product and not the air around it. Thanks to the magnets, these probes are particularly suitable for use on shelves.

Probe DESCRIPTION CABLE TEMP. RANGE

Thermoplastic -40÷110°C
NGP0P NTC sensor, thermoplastic, IP68, 100x100mm
5m -40÷230°F

Thermoplastic -50÷120°C
PMGP0P Pt1000 sensor, thermoplastic, IP68, 100x100mm
5m -58÷248°F

PTC/NTC INSERT PROBES

The insert probes with PTC or NTC sensor are suitable for applications where it is important to know the core temperature of goods. They are generally used
together with cooking oven or blast chiller controllers.

Probe DESCRIPTION CABLE TEMP. RANGE

PTC sensor, plastic handle, inox steel cap “dimension Silicone -38÷80°C
SPC10PS Ø3,5x100mm” 3m -36÷176°F

NTC sensor, plastic handle, inox steel cap “dimension Silicone -30÷80°C
NPC10PS Ø3,5x100mm” 3m -86÷176°F

PTC sensor, plastic handle, inox steel cap “dimension Silicone -50÷120°C
SPC10IS Ø3,5x100mm” 3m -58÷248°F

NTC sensor, plastic handle, inox steel cap “dimension Silicone -50÷120°C
NPC10IS Ø3,5x100mm” 3m -58÷248°F

Silicone for
PTC sensor, plastic handle, inox steel cap “dimension -50÷120°C
SPC10IA Ø3,5x100mm”
use with food
-58÷248°F
3m

Silicone for
NTC sensor, plastic handle, inox steel cap “dimension -50÷120°C
NPC10IA Ø3,5x100mm”
use with food
-58÷248°F
3m

148 PROBES
Pt100 THERMORESISTORS
Thermoresistance (RTD) probes are suitable when a high precision and low response time is necessary. The operating range of the Pt100 sensor is from
-70÷500°C (-94÷932°F), the precision is according to standard IEC751.

Probe DESCRIPTION CABLE TEMP. RANGE

General purpose, 3 wires, inox steel cap “dimension PVC -30÷105°C

PT6 Ø6x100mm” 2m -22÷221°F

Silicone -60÷200°C
PT6.S Protected, 3 wires, inox steel cap “dimension Ø6x100mm”
2m -76÷392°F

Vetrotex -60÷350°C
PT6.F Protected, 3 wires, inox steel cap “dimension Ø6x100mm”
2m -76÷662°F

Compact, with male connection, 2 wires, inox steel cap Silicone -70÷500°C
PT310 “dimension Ø3x100mm” 2m -94÷932°F

Compact, with male connection, 2 wires, inox steel cap Silicone -70÷500°C
PT315 “dimension Ø3x150mm” 2m -94÷932°F

TC THERMOCOUPLES
Thermcouple (TC) probes are suitable when a short response time and high shock resistance are necessary. The operating range of the TCJ sensor is from 0÷600°C
(32÷1112°F) and the range of the TCK is from 0÷1150°C (32÷2102°F), the precision is according to standard IEC584-2.

Probe DESCRIPTION TEMP. RANGE

General purpose, protected, Fe-CO, cap “dimension Ø6x100mm”, 2,0/3,0m 0÷350°C

TJ6 vetrotex cable 32÷662°F

General purpose, protected, Cr-Al, cap “dimension Ø6x100mm”, 2,0/3,0m 0÷350°C

TK6 vetrotex cable 32÷662°F

0÷600°C
TJD215 DIN connector, Fe-CO, cap “dimension Ø2x150mm”
32÷1112°F

0÷600°C
TJD320 DIN connector, Fe-CO, cap “dimension Ø3x200mm”
32÷1112°F

0÷1150°C
TKD215 DIN connector, Cr-Al, cap “dimension Ø2x150mm”
32÷2102°F

0÷1150°C
TKD320 DIN connector, Cr-Al, cap “dimension Ø3x200mm”
32÷2102°F

-40÷200°C
CMJ Compensating female connector, Fe-CO, for TJD215 and TJD320
-40÷392°F

-40÷200°C
CMK Compensating female connector, Cr-Al, for TKD215 and TKD320
-40÷392°F

PROBES 149
 TEMPERATURE/HUMIDITY PROBES
Temperature/humidity probes for HVAC/R with DEW POINT calculation and RS485 output with
ModBUS protocol. XH50P and XH55P are the ideal solution for anti-sweat heater control;
these special probes, ideal for already existent plants, allow anti-sweat heater operation
according to dew point conditions of the retail space. Through the correct calibration of
Dixell algorithms, it is possible to obtain a proportional change of the operating voltage range
of anti-sweat heaters, optimizing its consumption and increasing the energy saving on the
average used power of the anti-sweat heaters.

• Available in 2 versions: XH50P (without knob), XH55P (with knob)

• LED to display the device status
• Wall mounting (503 box dim. compatible)
• Self extinguishing ABS housing

The XH50P and XH55P probes, depending on the actual needs, can be used stand-alone or in centralized applications combined with XM600 controllers for
multiplexed cabinets and XWEB5000 supervising system.

STAND-ALONE APPLICATION
• Based on the Dew Point estimate through the temperature and humidity
• measurement
• Thermostat control of anti-sweat heaters on a programmable value higher
• than the Dew Point
• Anti-sweat heaters control directly from XH

RS485
CENTRALIZED MANAGEMENT
• Use of Dew Point sensors
• Management of anti-sweat heaters set point through Supervising
• Direct control of anti-sweat heaters from the counter controller
• Possibility to manage regulation parameters in groups

RS485

HOW to ORDER

XH50/55P X H 5 P - 0 N C D E

C D E
Analog output Measurement unit Relay output
0 = No C = °C 1 = 8A
1 = Yes F = °F 2 = 16A

150 PROBES
 FEATURES XH50P XH55P
Knob pres
Power supply 12÷24Vac/dc - 12÷40Vdc 12÷24Vac/dc - 12÷40Vdc
Remote probe input NTC NTC
Digital input free of voltage free of voltage
Configurable relay output 8A, 16A 8A, 16A
Hot Key output pres pres
Serial output RS485 RS485
Analog output 0÷10V opt 0÷10V opt

HUMIDITY PROBES
XH10P and XH20P humidity probes are suitable for all those applications where it is necessary
to detect and control humidity. Such applications are: refrigeration, drying processes and more.
Depending on the model, they supply a standard output current (4÷20mA) or voltage (0÷10V)
signal. The high accuracy, the appropriate lead time and the sensor reliability also in cases with
condensation, make these probes extremely effective.

• Wall mounting
• Power consumption: 22mA max
• Protection: IP65
• Operating range: humidity 30÷90% for XH10P and 0÷99% for XH20P

HOW to ORDER

XH10/20P X H 0 P - 0 B 0 0 0

B
Output
0 = 4÷20mA
1 = 4÷10Vdc

FEATURES XH10P XH20P

Power supply 9÷18Vdc 15÷35Vdc - 12÷24Vac 9÷18Vdc 15÷35Vdc - 12÷24Vac
Output 4÷20mA 0÷10Vdc 4÷20mA 0÷10Vdc
Accuracy ±5% ±5% ±3% ±3%
Operating temperature 0÷60°C (32÷140°F) 0÷60°C (32÷140°F) 0÷70°C (32÷158°F) 0÷70°C (32÷158°F)
Storage temperature -30÷85°C (22÷185°F) -30÷85°C (22÷185°F) -30÷85°C (22÷185°F) -30÷85°C (22÷185°F)
Measurement range 30÷90%RH 30÷90%RH 0÷99%RH 0÷99%RH

PROBES 151
 PRESSURE PROBES

PRESSURE TRANSDUCERS
Pressure transducers supply a standard output current signal (4÷20mA). The silicon sensor
is assembled in a waterproof steel housing filled with oil that optimizes stable and constant
measurement with additional protection against vibrations and a duration equivalent to
millions of pressure cycles. The tip of the probe allows placement in contact with ammonia
and various other kinds of corrosive gases.
MALE FITTING
2 wires transducer with 4÷20mA output and measurement range –0,5÷7bar
PP07 (male or female fitting) 7/16”-20UNF

2 wires transducer with 4÷20mA output and measurement range –0,5÷11bar

PP11 (male or female fitting)

O 16,6
O9
2 wires transducer with 4÷20mA output and measurement range 0÷30bar
PP30 (male or female fitting) 2 2,5
15 8 12,5 17
2 wires transducer with 4÷20mA output and measurement range 0÷50bar 52,5
PP50 (male or female fitting)

FEMALE FITTING
FEATURES
Power supply 8÷28Vdc
Output 4÷20mA
Protection IP65
Operating temperature -40÷135°C (-40÷275°F)
Storage temperature -40÷135°C (-40÷275°F)
Accuracy 1% F.S.

RATIOMETRIC PRESSURE TRANSDUCERS

Pressure transducers supply a standard output ratiometric signal (0÷5V). The design is ideal for
demanding HVAC and refrigeration applications where long term reliability is necessary. The
electrical interface is a rugged industry-accepted connector. This device maintains accuracy
through a wide range of temperatures.

3 wires ratiometric transducer with 0÷5V output and measurement

PPR15 range 0÷15bar

3 wires ratiometric transducer with 0÷5V output and measurement FEMALE FITTING
PPR30 range 0÷35bar

3 wires ratiometric transducer with 0÷5V output and measurement

PPR45 range 0÷45bar

FEATURES
Power supply 4,5÷5,5Vdc
Output 0,5÷4,5Vdc
Protection IP65
Operating temperature -40÷135°C (-40÷275°F)
Storage temperature -40÷135°C (-40÷275°F)
Accuracy 1,2% F.S.

152 PROBES
ACCESSORIES
SECTION INDEX
FUNCTIONS MODELS

MODEM 154
Modem and antenna XWEB MODEM – TC35-KIT – XW-ANT 154
ENERGY ANALYSERS 154
Energy analysers EM21D – EM23D-1P – EM23D-3P – WM14D – WM22D 154
Transformers for analysers TA100-5 – TA200-5 155
WIRING 155
Ethernet patch cables CAB/WEB/NET – CAB/WEB/PC 155
Wiring for XC600CX CAB/CJ15 – CAB/CJ30 – CW15-KIT – CW25-KIT
CWC15-KIT – CWC30-KIT 155
Wiring for XEV and iPro DWXEV30 – DWS30-KIT – DWEX306-30KIT – DWB30-KIT
DWEX60-30KIT – DWX115-30KIT – DWEX70-30KIT – IP-FC108
IP-FC208 – IP-FC215CP – IP-FCEX60 – IP-FCX215 – IP-FCEX70
IP-FC500 155
PROGRAMMING 156
Programming tool WIZMATE PROG-TOOL KIT – XJ485USB-KIT 156
Programming keys HOT KEY – HOT KEY 128 – VISOKEY – PROG KEY 157
GATEWAY 157
Gateway for M-Bus meters i-METER 157
REMOTE DISPLAY 157
Remote display X-REP 157
Cables for remote display CAB/REP1 – CAB/REP3 – CAB/REP5 – CAB51F – CAB52F
CAB55F 157
VARIOUS 158
Printer XB07PR 158
Adapters C-BOX – C-BOX2 – VS-BOX – VS-BOX2 – V-KIT/W
V-KIT/B – FA64 – FA/CX 158
Filters FT-IL – FT-PW 158
Gaskets and protections MDP/CX – RG-C – RG-L – RG-LX – RG-V – PG-L 159
Fixing systems PM-WL – PM-WLT – XW-WA 159
Transformers TF3 – TF5 – TF10 – TF10D – TF20D – TF40D 159
Light switches LS-R – LS-G – LS-Y – CXLS-R – CXLS-G – CXLS-Y – WLS-R
WLS-G – WLS-Y 160
Cables CAB/KB11– CAB/USB10 – CAB/HK – CAB/485-TGIPG 160
Connectors XM-FC16 – XM-FC21 – XM-FC26 160
Serial interface XJ485CX 160
USB converter USB-ETH-CONV 160
Clock board XM-RTC 161
Batteries BA6H – BA24H 161
Anti-condensing kit XV-ACK 161
Power suppliers PW-DL – TF-TGIPG – PW200J 161
USB key XDL-KEY 161
Relay T92 161
Simulators KIT SIMULATORE IPG108 – KIT SIMULATORE IPG115D 161
ACCESSORIES 153
 ACCESSORIES

MODEM
MODEM and ANTENNA

Analogue serial modem PDA compatible, 56kbps (DIN Rail format)

HOW to ORDER:
For XWEB,
XWEB MODEM IPG115 and IPG215
XWEBMODEM-200 (with 24Vac power supply)
XWEBMODEM-400 (with 110Vac power supply)
XWEBMODEM-500 (with 230Vac power supply)

For
GSM modem kit containing the modem, the power supply
XWEB300D/500D,
TC35-KIT XWEB500,
unit, the transmitting antenna with the relevant cable and the
connection to controlling system
IPG115 and IPG215

For
XW-ANT XWEB300D/500D GSM/GPRS antenna with magnetic base and 2,5m cable
and IPL500D

ENERGY ANALYSERS
ENERGY ANALYSERS

Single/three-phase energy meter, CT-connected (5A), RS485 output. Self power supply.
EM21D Dimensions: 71,7x71,7x64,6mm. DIN Rail or panel mounting. Housing: ABS self-
extinguishing. Operating temperature: -25÷55°C (-13÷131°F). Relative humidity < 90%

Single-phase energy meter, direct connected with integrated current transformers, with
RS485 output. Current inputs 10(65)A, voltage 230VLN. Self power supply.
EM23D-1P Dimensions: 71,6x90x66,3mm. DIN Rail mounting. Housing: ABS self-extinguishing.
Operating temperature: -25÷55°C (-13÷131°F). Relative humidity < 90%

Three-phase energy meter, direct connected with integrated current transformers, with
RS485 output. Current inputs 10(65)A, voltage 230VLN. Self power supply.
EM23D-3P Dimensions: 71,6x90x66,3mm. DIN Rail mounting. Housing: ABS self-extinguishing.
Operating temperature: -25÷55°C (-13÷131°F). Relative humidity < 90%

154 ACCESSORIES
 Three-phase power analyser, with RS485 output. 90÷260Vac power supply.
WM14D Dimensions: 107,5x90x63mm. DIN Rail and wall mounting. Housing: ABS self-extinguishing.
Operating temperature: 0÷55°C (32÷131°F). Relative humidity < 90%

Single/three-phase power analyser 400Vac, with RS485 output. 230Vac power supply.
WM22D Dimensions: 162,5x90x63mm. DIN Rail and wall mounting. Housing: ABS self-
extinguishing. Operating temperature: 0÷55°C (32÷131°F). Relative humidity < 90%

TRANSFORMERS for ANALYSERS

Current transformer to use with EMD21D and WM14D controllers. DIN Rail, bus-bar and wall
TA100-5 mounting. Primary winding current 100A. Secondary winding current 5A

Current transformer to use with EMD21D and WM14D controllers. DIN Rail, bus-bar and wall
TA200-5 mounting. Primary winding current 200A. Secondary winding current 5A

WIRING
ETHERNET PATCH CABLES

CAB/WEB/NET For iPro and XWEB Ethernet patch cable, 3m

CAB/WEB/PC For iPro and XWEB Ethernet patch cross over cable, 1m

WIRING for XC600CX

For XC645CX,
CAB/CJ15 XC650CX Connector with 1,5m wires for HP, DI inputs and analog outputs
and XC652CX
For XC645CX,
CAB/CJ30 XC650CX Connector with 3m wires for HP, DI inputs and analog outputs
and XC652CX
For XC650CX
CW15-KIT and XC652CX
2 disconnectable female connectors, 12-14 pins with wires 1,5m

For XC650CX
CW25-KIT and XC652CX
2 disconnectable female connectors, 12-14 pins with wires 2,5m

2 disconnectable female connectors, 6-14 pins with wires 1,5m,

CWC15-KIT For XC645CX
for models with internal triac

2 disconnectable female connectors, 6-14 pins with wires 3m,

CWC30-KIT For XC645CX
for models with internal triac

WIRING for XEV and iPro

DWXEV30 For XEV20D 1 disconnectable female connector, 12 pins with wires 3m

For IPG108D
DWS30-KIT and IPG108E
2 disconnectable female connectors, 12-16 pins with wires 3m

DWEX306-30KIT For IPX306D 2 disconnectable female connectors, 10-16 pins with wires 3m

3+3 disconnectable female connectors, 6-8-10 pins and

DWB30-KIT For IPG115D
10-16-22 pins with wires 3m

1+2 disconnectable female connectors, 8 and 10-16 pins with

DWEX60-30KIT For IPX106D
wires 3m

ACCESSORIES 155
 3+3 disconnectable female connectors, 6-8-10 pins and
DWX115-30KIT For IPX115D
10-16-22 pins with wires 3m

5+3 disconnectable female connectors, 6-6-8-8-10 pins and

DWEX70-30KIT For IPX125D
10-16-22 pins with wires 3m

For IPG108D
IP-FC108 and IPG108E
1+1 screw female connectors, 7 and 12 pins

For IPG208D,
1+1 screw female connectors, 7 and 12 pins and
IP-FC208 IPG208E and
2 bayonet female connectors 12-16 pins
IPR208D

For IPG215D,
6 screw female connectors, 2-3(x2)-6-7-8 pins and
IP-FC215CP IPG215F and
3 bayonet female connectors 10-16-22 pins
IPR215D

1 screw female connector, 12 pins and

IP-FCEX60 For IPX206D
2 bayonet female connectors 10-16 pins

6 screw female connectors, 2-3(x2)-6-7-8 pins and

IP-FCX215 For IPX215D
3 bayonet female connectors 10-16-22 pins

9 screw female connectors, 2-3(x3)-5-6(x2)-7-8 pins and

IP-FCEX70 For IPX225D
3 bayonet female connectors 10-16-22 pins

IP-FC500 For IPL500D 2 screw female connectors 2-9 pins

PROGRAMMING
PROGRAMMING TOOL

Programming kit made up of CD and DIN RAIL module (PROG-TOOL) with connections
for Hot Key and RS485 for Dixell instruments; it allows the user to connect controllers
to a PC running Windows 2000/XP OS. The CD-rom includes: WIZMATE (to program an
instrument or a Hot Key).The Kit includes: the CAB/PTK2 wire for DIN module instrument
WIZMATE connection, the CAB/PTK485 wire for DIN module RS485 (built-in) instrument connection,
PROG-TOOL KIT the RS232-USB-CONV converter for PC connections
How to order:
WIZMATE PROG-TOOL KIT 110V (with 110Vac power supply)
WIZMATE PROG-TOOL KIT 230V (with 230Vac power supply)

The USB to RS485 serial converter (2 wires) is the perfect choice to interface any computer,
equipped with WIZMATE® software and a USB port, to a network of instruments. XJ485USB
is only 78x40x22mm and supports different communication speeds in the range from 300
XJ485USB-KIT to 19200bps. The kit includes the USB cable type A-B, 1,5m and a USB with the drivers for
the main operative systems (Microsoft Windows, Linux, MAC OS) and a WIZMATE® software
version

156 ACCESSORIES
PROGRAMMING KEYS

Key for a quick and easy Dixell’s controllers programming.

HOT KEY Dimensions 0,8x16x46mm

Key for a quick and easy XB570L controller programming.

HOT KEY 128 Dimensions 0,8x16x46mm

Programming key for Visograph keyboard.

VISOKEY Dimensions 0,8x16x46mm

Programming key for firmware update.

PROG KEY Dimensions 0,8x16x46mm

GATEWAY
GATEWAY for M-BUS METERS

M-Bus - ModBUS-RTU Slave protocol converter, used to centralize and read the consumption 0 0 0 0 0 2 4 7 0 0 0 0 0 2 4 7 0 00000000301294 70 0 0 0 0 3 1 9 0 0 0 0 0 04 08 53 1 90 0 0 0 0 4 8 5 00000485

data of the energy meters (electricity, gas or water).

m3 m3 mm 3 3 m3 kWm3 kW kW

i-METER is ideal for monitoring energy consumption and control of system leaks.
M-BUS
Housing: 8 DIN
i-METER Protection: IP50
Connections: screw terminals
Power supply: 24 Vac/dc ± 10%
N° of nodes that can be connected: max 3
Certified models: ISTA
(Istameter, Domaqua, Sensonic II) RS485

REMOTE DISPLAY
REMOTE DISPLAY

Remote display for temperature reading to be used with compatible Dixell’s controllers. The
front panel is IP65 and makes the installation easy wherever the controlled temperature needs
to be displayed.
X-REP Display: n° digits ± 3 d.p.
Power Supply: from the controller
HOW to ORDER: X-REP-00000
HOW to ORDER: X-REP-10000 (for XJA, XJP)

CABLES for REMOTE DISPLAY

CAB/REP1 Multipolar connector for X-REP, 1m; to use with WING, XM, XB series

CAB/REP3 Multipolar connector for X-REP, 3m; to use with WING, XM, XB series

CAB/REP5 Multipolar connector for X-REP, 5m; to use with WING, XM, XB series

CAB51F Cable for X-REP, 1m; to use with XJA, XJP and PRIME CX series

CAB52F Cable for X-REP, 2m; to use with XJA, XJP and PRIME CX series

CAB55F Cable for X-REP, 5m; to use with XJA, XJP and PRIME CX series

ACCESSORIES 157
 VARIOUS
PRINTER

Compact thermal printer designed for connection to the XB570L controller. It provides a
hard copy print out of the cycles. Paper width 58mm. EASYLOCK fixing system that allows
XB07PR to adapt the printer to the panel thickness without further supports. Operating Voltage
range: 3.5÷8V. Dimensions: 85.5x85x55mm

ADAPTERS

C-BOX Wall adapter for C and CX format controllers, IP55, dimensions: 108x108x90mm

C-BOX2 Wall adapter for C and CX format controllers, IP55, dimensions: 170x105x82mm

VS-BOX Wall adapter for VS format controllers, IP55, dimensions: 135x74x72mm

VS-BOX2 Wall adapter for VS format controllers, IP55, dimensions: 170x105x82mm

V–KIT/W Wall adapter for vertical keyboards, IP55, dimensions: 100x64x43mm, white colour

V–KIT/B Wall adapter for vertical keyboards, IP55, dimensions: 100x64x43mm, black colour

FA64 Frame adapter for smaller 31x64mm models to fit larger 32x74mm instrument cut outs

Multifunction frame adapter from L to CX format controllers with the possibility to

FA/CX mount up to 2 CXLS light switches

FILTERS

FT-IL Inductive load filter 0,1μF/100Ohm 250V

FT-PW Line filter

158 ACCESSORIES
GASKETS and PROTECTIONS

MDP/CX Plastic protection for C and CX formats against dripping on terminal blocks

RG-C Front panel rubber gasket for C format, IP65 mounting

RG-L Front panel rubber gasket for L format (STANDARD), IP65 mounting

RG-LX Front panel rubber gasket for L format (INOX), IP65 mounting

RG-V Front panel rubber gasket for V format, IP65 mounting

PG-L Plastic multipurpose protection for L format, IP65

FIXING SYSTEMS

Patented fixing system (Design Patent: UAMI n. 001851916-0001) for a simple and easy
to mount solution suitable for any metallic flat surface for WING-L INOX and BACK-
PM-WL PANEL controllers with polycarbonate. The kit is composed of one adhesive bracket and
counter plastic bracket

Patented fixing system (Design Patent: UAMI n. 001851916-0001) for a simple and easy to
PM-WLT mount solution suitable for any metallic flat surface for WING-L TOUCH controllers. The
kit is composed of one adhesive bracket and counter plastic bracket

XW-WA Wall mounting bracket for XWEB500

TRANSFORMERS

The TF3 3VA model is available in the following versions: 230/12Vac, 110/12Vac and
TF3 24/12Vac. Others models with internal thermofuse (130°C) and UL, CSA, VDE approval
are available

The TF5 5VA model is available in the following versions: 230/12Vac, 110/12Vac and
TF5 24/12Vac

The TF10 10VA model is available in the following versions: 230/12Vac, 110/12Vac and
TF10 24/12Vac

The TF10D (DIN Rail mounting) 10VA model is available in the following versions:
TF10D 230/24Vac and 110/24Vac. 2 DIN Rail format

The TF20D (DIN Rail mounting) 20VA model is available in the following versions:
TF20D 230/24Vac and 110/24Vac. 3 DIN Rail format

The TF40D (DIN Rail mounting) 40VA model is available in the following versions:
TF40D 230/24Vac and 110/24Vac. 4 DIN Rail format

ACCESSORIES 159
 LIGHT SWITCHES

LS-R Red light switch 16A/250Vac

LS-G Green light switch 16A/250Vac

LS-Y Yellow light switch 16A/250Vac

CXLS-R Red light switch 16A/250Vac for FA/CX

CXLS-G Green light switch 16A/250Vac for FA/CX

CXLS-Y Yellow light switch 16A/250Vac for FA/CX

WLS-R Red light switch 16A/250Vac for WING Series

WLS-G Green light switch 16A/250Vac for WING Series

WLS-Y Yellow light switch 16A/250Vac for WING Series

CABLES

CAB/KB11 1m cable to connect the keyboard and the XEV driver or the XJA-XJP-XJR modules

CAB/USB10 USB extended cable, 1m with plastic cap for XW737K and XW777K

CAB/HK Adapter cable, 5 pins for Hot Key input, 0,5m for XC10CX and XC30CX

CAB/485-TGIPG Cable for RS485 connection with connector for TGIPG

CONNECTORS

XM-FC16 Female connector kit, 16 pins for XM660K and XM670K

XM-FC21 Female connector kit, 21 pins for XM669K and XM679K

XM-FC26 Female connector kit, 26 pins for XM668K and XM678K

SERIAL INTERFACE

The serial interface converts the TTL output into an RS485 signal that can be used to connect
XJ485CX the unit to the controlling and supervising system. Dimensions: 1,6x16x46mm.
Multipolar connector included, 0,2m

USB CONVERTER

USB-ETH-CONV USB-Ethernet adapter for iPro programmable controllers in 4 DIN Rail format

160 ACCESSORIES
CLOCK BOARD

XM-RTC Standard clock board for XM series

BATTERIES

BA6H Battery for XJDL40D of 1.2Ah 6 hours of backup

BA24H Battery for XJDL40D of 4.0Ah 24 hours of back-up

ANTI-CONDENSING KIT

XV-ACK Anti-condensing kit for XV110K and XV150K models

POWER SUPPLIERS
Power supplier (24, 230Vac) for XDL01 module (with CAB/DL2 cable, 2m included) that
works as a gateway between the XDL01 and Dixell instruments equipped with TTL or
PW-DL RS485 serial output
HOW to ORDER: PW-DL-20000 (for 24Vac)
HOW to ORDER: PW-DL-50000 (for 230Vac)

TF-TGIPG Power supplier 24Vdc/1A for TGIPG

PW200J Power supplier for XJ200 modules with TTL-RS485 converter

USB KEY

XDL-KEY USB key for XDL01, XW737K and XW777K

RELAY

Relay with a 30A current (3 HP/240Vac or 1HP/110Vac) suitable for all those applications
where the load current is higher than the rating value of the relays mounted on the
instruments. Contacts: 2C/O - 2N/O. Rated current: 30/3 (NO/NC). Rated/max. voltage:
T92 250/480Vac. Rated breaking capacity: 7500VA. Nominal coil voltage: 240Vac. Nominal
coil power: 1.7W/4VA. Coil contact: fast-on: 8mm. Dimensions: 30,5x52,3x34,6mm.
Ambient temperature: -40÷65°C (-40÷149°F)

SIMULATORS
Simulator of inputs and outputs is suitable to test the applications developed for the IPG108
KIT SIMULATORE programmable controllers. Thanks to a resistant aluminum frame, its compact dimensions
IPG108 560x340x85mm, a complete series of wirings and versatile enclosure, it can be utilized in every
situation. The simulator has a 230Vac power supply

Simulator of inputs and outputs is suitable to test the applications developed for the IPG115
KIT SIMULATORE programmable controllers. Thanks to a resistant aluminum frame, its compact dimensions
IPG115D 560x340x85mm, a complete series of wirings and versatile enclosure, it can be utilized in every
situation. The simulator has a 230Vac power supply

ACCESSORIES 161
 DIMENSIONS & CUT OUT
CX, KEYBOARDS (32x74) - panel mounting

C (32x74) - panel mounting

XT11S, X-REP (31x64) - panel mounting 8 DIN (DIN RAIL) - wall or DIN Rail mounting

4, 10 DIN (DIN RAIL) - wall or DIN Rail mounting

Size in mm

162 DIMENSIONS & CUT OUT

L(T), LR(T), KEYBOARDS (38x185) - panel mounting

WING STANDARD, INOX, TOUCH WING INOX, POLYCARBONATE WING INOX, TOUCH, POLYCARBONATE
front mounting with screws back-panel mounting with captive screws and PG-L optional back-panel mounting with PM-WL(T)

WING STANDARD

WING INOX

WING INOX/POLYCARBONATE

Fixing bracket
is included

WING TOUCH
Size in mm

KEYBOARD Y = 23

DIMENSIONS & CUT OUT 163

 V, VS, KEYBOARDS (100x64) - panel mounting V-KIT (100x64) - wall mounting

KEYBOARD Y = 24

VS Y = 40

V Y = 59

C-BOX (108x108) - wall mounting VS-BOX (135x74) - wall mounting

C-BOX2 (170x105) - wall mounting VS-BOX2 (170x105) - wall mounting

XV110K (139x158) XV150K (175x200)

Size in mm

164 DIMENSIONS & CUT OUT

PK (80x70) - panel mounting

XV300K - wall mounting

VISOGRAPH (82x156) - wall or panel mounting XDL (45x70) - wall mounting

Size in mm

DIMENSIONS & CUT OUT 165

 XLR, XLH, XWEB500 (230x210) - wall or panel mounting

XWEB3000, XWEB5000 (370x238) - 19’’ RACK mounting

XJ200 (80x80) - wall or pipemount or shelves mounting

The XJ200 must be fixed

vertically with the apposite
bracket
Size in mm

166 DIMENSIONS & CUT OUT

TGIPG - panel mounting

Size in mm
GENERAL TECHNICAL FEATURES
The following technical features are ordinary for the products present in this catalogue, other main features can be found on
the preliminary section of the series.

Housing self extinguishing ABS

S format ➡ IP65
C, CX formats and CX keyboards ➡ IP65
L(T), LR(T) formats and WING horizontal keyboards ➡ IP65
V, VS formats and WING vertical keyboards ➡ IP65
Front protection XLR, XLH formats ➡ IP65
(with gasket, if available) 4, 8, 10 DIN formats ➡ IP20
VG format ➡ IP65
XDL ➡ IP30
TGIPG ➡ IP65
XJ200 ➡ IP30

Accuracy better than 1% of F.S.

Data storage EEPROM memory
Operating temperature 0÷60°C (32÷140°F)
Storage temperature -30÷85°C (22÷185°F)
Relative humidity 20÷85%
Resolution 0,1°C or 1°F

All trademarks are property of their respective owners.

Dixell reserves the right to alter its products without notice. All rights reserved.
Because environmental conditions are outside of Dixell’s control, we cannot assume liability for results obtained or any damages which may occur due to improper application.
Manuals and updates are available on our Web Site www.dixell.com.

DIMENSIONS & CUT OUT/GENERAL TECHNICAL FEATURES 167

release 1.0 - 1582300011-GB

Dixell S.r.l. - 32010 Pieve d’Alpago (BL) ITALY - Z.I. Via dell’Industria, 27
Tel. +39.0437.9833 r.a. - Fax +39.0437.989313 - www.dixell.com - [email protected]