Standard

SCS2
Large bore size cylinder
SCP*3

CMK2

CMA2

SCM
ø125/ø140/ø160
ø180/ø200/ø250 SCG

Overview SCA2
Large bore size among general
purpose cylinders SCS2
(ø125 to ø250) series. Wide
CKV2
range of variations. This cylinder
is now even more reliable. CAV2/
COVP/N2
Lighter than ever before!
Adopting an aluminum cover and SSD2
tube has halved the product weight.
SSG
Features
SSD
Compact switch equipped
The smaller T-switch than the
CAT
conventional
Saves space by eliminating MDC2
protrusions when mounted.
Conventional switch MVC
CONTENTS
SMG
Series variation 622
MSD/
Variation and option combination selection table 624 MSDG
T-switch

Double acting/single rod/lubrication (SCS2) 626 FC*

Magnet provided as standard
[SCS2-LN, LH] Double acting/single rod/no-lubrication (SCS2-N) 626
The ø250 also has a switch. Now Double acting/stroke adjustable (SCS2-P) 640 STK
all models (LN, LH) can handle Double acting/heat resistant (SCS2-T) 644
SRL3
additionally mounted switches. Double acting/double rod (SCS2-D) 648
Port and needle on the same surface ‌Double acting/double rod/no-lubrication SRG3
The air supply/exhaust ports (SCS2-LND) 648
and cushion needle are Double acting/back to back (SCS2-B) 654 SRM3
positioned on the same Double acting/2-stage (SCS2-W) 658
surface. Easier installation and SRT3
Double acting/low hydraulic (SCS2-H) 662
adjustment of the cylinder.
Double acting/rubber scraper (SCS2-G) 668 MRL2
SCS2 Series common accessory dimensions 639
Safety precautions 671 MRG2

SM‑25
Dimensional compatibility [except LH]
Dimensional compatibility with ShkAbs
the conventional model (SCS)
facilitates maintenance. The cylinder switches T2YH, T2YV, T3YH, and T3YV are FJ
* ‌The piping port positions are scheduled for end of production at the end of December 2023.
different. FK
Metallic silver color Spd
The silver surface (metallic Contr
silver without paint) matches
various devices. Ending

621
 Series Large bore size cylinder
SCP*3
variation SCS2 Series
CMK2

CMA2 Mounting

Min. stroke (mm)

Max. stroke (mm)

Custom stroke (per mm)

Available stroke (mm)

Basic
Axial foot

Head side flange

Eye bracket
Rod side flange
SCM

SCG

SCA2 Variation Model No. Bore size Standard stroke (mm)

SCS2
JIS symbol (mm)
CKV2
CAV2/ 50 75 100 150 200 250 300 00 LB FA FB CA
COVP/N2
SCS2 ø125/ø140/ø160 800
SSD2
Double acting/ ø180 900
1 2000 1
SSG lubrication ø200 1000
ø250 1200
SSD SCS2-N ø125/ø140/ø160 800
Double acting/
ø180 900
CAT no-lubrication/ 1 2000 1
ø200 1000
with switch
MDC2 ø250 1200
SCS2-P ø125/ø140/ø160 800 800
MVC Double acting/
ø180 900 900
stroke adjustable 25 1
SMG ø200 1000 1000
(push)
ø250 1200 1200
MSD/
MSDG SCS2-T ø125/ø140/ø160 800 800
Double acting/ ø180 900 900
FC* 1 1
heat resistant ø200 1000 1000
STK ø250 1200 1200
SCS2-D ø125/ø140/ø160 800 800
SRL3 Double acting/ ø180 900 900
double rod/with 1 1
SRG3 switch ø200 1000 1000
ø250 1200 1200
SRM3 SCS2-B ø125/ø140/ø160 800 800
Double acting/ ø180 900 900
SRT3 1 1
back to back ø200 1000 1000
MRL2 ø250 1200 1200
SCS2-W ø125/ø140/ø160 800 800
MRG2 Double acting/2- ø180 900 900
2 1
SM‑25 stage (Indicator
ø200 1000 1000
ø250 1200 1200
ShkAbs SCS2-H ø125/ø140/ø160 800 800
Double acting/ ø180 900 900
FJ 20 1
low hydraulic ø200 1000 1000
FK ø250 1200 1200
SCS2-G ø125/ø140/ø160 800 800
Spd
Contr Double acting/ ø180 900 900
1 1
rubber scraper ø200 1000 1000
Ending
ø250 1200 1200
622
 Clevis bracket

Intermediate trunnion

Rod side trunnion

Head side trunnion Mounting

Intermediate supporting hole trunnion

Rod side hole trunnion

Head side trunnion

CB TC TA TB TF TD TE
N
Without cushion

B
Both sides cushioned

R
Rod side cushioned
Cushion

H Head side cushioned

: Standard,

With cushion section check valve

C2
J

Bellows (100°C)
L

Bellows (250°C)
: Option,

Piston rod material change (stainless steel)

Option

Cushion needle position S

T

Cushion needle position T

Copper and PTFE free

P6
I

Rod eye
: Made to order,

Rod clevis

Eye bracket
Accessory

Clevis bracket
B1 B2

SCS2-LNG SCS2-LH SCS2-LNW SCS2-LNB SCS2-LND SCS2-LNP SCS2-LN Switch

: Not available

Page

668
662
658
654
648
644
624
626
626
Series variation
SCS2 Series

623
FJ

FK
CAV2/

FC*

Spd
CAT

STK
MSD/
SSD
SSG
SCG

MVC
SCM

SMG

SM‑25

ShkAbs
SRM3
SCA2
CMK2

SRT3
CMA2

Ending
MRL2
SSD2

Contr
MSDG
SCP*3

SRG3
CKV2

MRG2
SRL3
MDC2
SCS2

COVP/N2
 SCS2 Series
SCP*3
Variation and option combination selection table
: Standard
CMK2
: Option
: Available (made-to-order product)
CMA2
: Available depending on conditions (Contact CKD.)
SCM x: Not available
Category Variation Port thread Option
SCG

NPT

Copper and PTFE free

Double acting/lubrication

Specify piston rod end form

Double acting/no-lubrication
Double acting/with switch
Double acting double rod
Back to back
Double piston
Adjustable stroke push
Low hydraulic
Heat resistance (120°C)
Rubber scraper

With cushion section check valve

Neoprene with bellows
Silicone rubber with bellows
Piston rod material stainless steel
Cushion needle position specification
SCA2

SCS2
Category

CKV2
CAV2/
COVP/N2

SSD2

SSG
Code None N LN D B W P H T G N G C2 J L M R,S,T P6 N*

SSD Double acting/lubrication Blank

Double acting/no-lubrication N x *1
CAT Double acting/with switch LN x
Double acting double rod D x x x
MDC2
Variation

Back to back B x x
MVC Double piston W 1
Adjustable stroke push P
SMG
Low hydraulic H x
MSD/ Heat resistant (120°C) T x 2
MSDG
Rubber scraper G
FC*
Port thread

NPT N x
G G
STK

SRL3 With cushion section check valve C2

Neoprene with bellows J x
SRG3
Silicone rubber with bellows L
Option

SRM3 Piston rod material stainless steel M

Cushion needle position specification R.S.T
SRT3 Copper and PTFE free P6
Specify piston rod end form N*
MRL2

MRG2 Cylinder switch Listed separately

Rod eye I
Accessory

SM‑25 Rod clevis Y

Eye bracket B1
ShkAbs
Clevis bracket B2
FJ

FK
*1 : Lubrication is not possible for the heat resistant T (no-lubrication).
Spd 1 : Available on the S2 side only.
Contr 2 : Compatible with working temperature of up to 100°C.

Ending

624
 SCS2 Series
Variation and option combination selection table
[Example of model No.] SCP*3

SCS2 LN G LB 125 B 100 T0H D J I CMK2

Model No. CMA2

A Mounting C Port E Stroke G Switch quantity I Accessory
thread
SCM
Variation B Bore D Cushion F Switch H Option
size SCG
* ‌List in order model No.
from left to right
in the left table. SCA2

Model No.: Large bore size cylinder

SCS2
Variation : No-lubrication with switch/low hydraulic
A Mounting : Axial foot
B Bore size : ø125 mm
CKV2
C Port thread : Rc thread CAV2/
D Cushion : Both sides cushioned COVP/N2
E Stroke : 100 mm
F Switch model No.: Reed T0H switch, lead wire 1m SSD2
G Switch quantity : 2
H Option : Bellows material, for max. ambient temperature 100°C SSG
I Accessory : Rod eye

SSD
*1: The back to back includes two cylinders. Specify the model No. as below when ordering variation.
For S1 variations only, insert the variation code before the stroke of S1.
(Example) SCS2-B-125-H50-75: Only S1 is the low hydraulic. CAT
For S2 variations only, insert the variation code before the stroke of S2.
(Example) SCS2-B-125-50-H75: Only S2 is the low hydraulic. MDC2
When ordering the same variation for S1 and S2, insert the variation code before the bore size.
(Example) SCS2-BH-125-50-75: Both S1 and S2 are the low hydraulic.
MVC

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3

SRM3

SRT3

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

625
 Large bore size cylinder
Double acting/single rod/lubrication/no-lubrication

SCP*3
SCS2 Series
Bore size: ø125/ø140/ø160/ø180/ø200/ø250
CMK2
JIS symbol
CMA2

SCM
Specifications
SCG Item SCS2/SCS2-N/SCS2-LN
Bore size mm ø125 ø140 ø160 ø180 ø200 ø250
SCA2 Actuation Double acting
Working fluid Compressed air
SCS2 Max. working pressure MPa 1.0 (≈150 psi, 10 bar)
Min. working pressureMPa 0.05 (≈7.3 psi, 0.5 bar)
CKV2 Proof pressure MPa 1.6 (≈230 psi, 16 bar)
Ambient temperature °C -5 (23°F) to 60 (140°F) (no freezing)
CAV2/
COVP/N2 Port size Rc1/2 Rc3/4 Rc1
Stroke tolerance mm +1.0
0 ( to 300), +1.4
0 ( to 1000), +1.8
0 ( to 1200)
SSD2 Working piston speed mm/s 20 to 1000 (Operate within the absorbed energy.)
Cushion Air cushion
SSG Effective air cushion length mm 21.6 21.6 21.6 21.6 26.6 26.6
Lubrication Required (use turbine oil class 1 ISO VG32 for lubrication)/Not required for SCS2-N/LN
SSD Cushioned 63.5 91.5 116 152 233 362
Allowable
0.371 0.386 0.386 0.958 1.08 2.32
CAT absorbed Without
Without any cushion, this product cannot absorb large energy generated
energy  J cushion
by an external load. We recommend using an external shock absorber.
MDC2

MVC
Stroke
SMG Bore size (mm) Standard stroke (mm) Max. stroke (mm) Available stroke (mm) Min. stroke (mm) Trunnion, min. stroke (mm)
ø125 23
MSD/
ø140 800 25
MSDG
ø160 50/75/100/150/ 27
2000 1
FC* ø180 200/250/300 900 28
ø200 1,000 28
STK ø250 1,200 28
*1: The custom stroke is available in 1 mm increments.
SRL3 *2: If the max. stroke is exceeded, product specifications may not be met, depending on operating conditions. Contact CKD in this case.

SRG3
Non-sag block
SRM3
A non-sag block will be added to the middle part of the cylinder if the stroke is in the range given in the table below.
SRT3 Additional stroke to the non-sag block
Bore size (mm) Stroke
MRL2 ø125
1801 to 2000
ø140
MRG2

SM‑25

ShkAbs
Code
TN

FJ TM TN CE
Bore size (mm)
ø125 150 150 50
FK ø140 190 170 55

Spd TM CE
Contr

Ending

626
 SCS2 Series
Specifications
Min. stroke with switch SCP*3
Item Stroke when mounted Stroke of intermediate Stroke of rod side Stroke of head side
Bore size (mm) on the same surface supporting hole trunnion supporting hole trunnion supporting hole trunnion CMK2
Port Port Port Port
Sketch
CMA2
Switch
SCM
Bore size Position cannot be detected Position cannot be detected
at the rod side stroke end. at the head side stroke end.

ø125 120 or more 70 or more SCG

ø140 125 or more 75 or more
ø160 130 or more 80 or more SCA2
Reed switch (T*) 20 or more
ø180 135 or more 85 or more
ø200 140 or more 90 or more SCS2
ø250 150 or more 100 or more
CKV2
CAV2/
Switch specifications COVP/N2
1-color/2-color LED/for AC magnetic field proof
2-wire proximity 3-wire proximity 2-wire reed 2-wire proximity SSD2
Item T1H/ T2H/T2V/ T2YH/ T2WH/ T3H/ T3PH/ T3YH/ T3WH/ T2YD (*4)
T0H/T0V T5H/T5V T8H/T8V SSG
T1V T2JH/T2JV T2YV T2WV T3V T3PV T3YV T3WV T2YDT
For programmable Dedicated for For programmable For programmable For programmable controller, For programmable For programmable
Applications controller, relay, relay, IC circuit (no indicator SSD
compact solenoid valve programmable controller controller, relay controller, relay lamp), serial connection controller, relay controller
Output method - NPN output PNP output NPN output NPN output -
Pwr. supp. V. - 10 to 28 VDC - CAT
Load voltage 85 to 265 VAC 10 to 30 VDC 24 VDC ±10% 30 VDC or less 12/24 VDC 100/110 VAC 5/12/24 VDC 100/110 VAC 12/24 VDC 110 VAC 220 VAC 24 VDC ±10%
Load current 5 to 100 mA 5 to 20 mA (*3) 100 mA or less 50 mA or less 5 to 50 mA 7 to 20 mA 50 mA or less 20 mA or less 5 to 50 mA 7 to 20 mA 7 to 10 mA 5 to 20 mA MDC2
Red/green Red/green Yellow Red/green Red/green Red/green
LED LED LED LED No indicator LED
Indicator LED LED LED LED LED LED MVC
(Lit when ON) (Lit when ON) (Lit when ON) (Lit when ON) lamp (Lit when ON)
(Lit when ON) (Lit when ON) (Lit when ON) (Lit when ON) (Lit when ON) (Lit when ON)
≤ 1 mA at 100 VAC,
Leakage current 1 mA or less 10 μA or less 0 mA 1 mA or less SMG
≤ 2 mA at 200 VAC
1 m:33 1 m:18 1 m:33 1 m:18 1 m:18 1 m:33 1 m:18 1 m:33 1 m:61 MSD/
Weightg 3 m:87 3 m:49 3 m:87 3 m:49 3 m:49 3 m:87 3 m:49 1 m:18 3 m:49 5 m:80 3 m:87 3 m:166 MSDG
5 m:142 5 m:80 5 m:142 5 m:80 5 m:80 5 m:142 5 m:80 5 m:142 5 m:272
FC*
*1 : Refer to Ending Page 1 for detailed switch specifications and dimensions.
*2 : Switches other than the above models, such as switches with connectors, are also available. Refer to Ending Page 1.
*3 : Max. load current: 20 mA at 25°C. The current is lower than 20 mA if the operating ambient temperature around the switch is higher than 25˚C. STK
(5 to 10 mA at 60°C)
*4 : Switch for AC magnetic field (T2YD/T2YDT) cannot be used in DC magnetic field.
SRL3

SRG3
Cylinder weight (Unit: kg)
Item/mounting Product weight when stroke (S) = 0 mm Switch weight Additional weight SRM3
Basic Axial foot Flange Eye bracket Clevis bracket Trunnion Mounting per S =
Bore size (mm) Switch
(00) (LB) (FA/FB) (CA) (CB) (TA/TB/TC) bracket 100mm SRT3
ø125 7.22 8.72 10.52 10.22 10.32 10.62 0.028 1.54
ø140 9.35 11.35 14.75 13.15 13.35 12.55 Refer to 0.030 1.78 MRL2
ø160 12.35 15.45 19.25 17.35 17.65 18.75 the weight 0.034 2.22
ø180 16.75 21.25 28.75 24.15 24.65 24.85 in the switch 0.038 2.96 MRG2
ø200 22.78 28.48 36.48 32.28 32.48 34.58 specifications. 0.040 3.54
ø250 40.51 48.91 66.41 64.51 59.01 69.21 0.045 5.38
SM‑25
Product weight for S = 0 mm stroke·············8.72 kg
300
Additional weight for S = 300 mm stroke············1.54 x 100 = 4.62 kg ShkAbs
(Example) Product weight of SCS2-LN-LB-125B-300-T0H-D Weight of 2 switches (T0H-D)···········0.018 x 2 = 0.036 kg
Product weight with 2 switch brackets····0.028 x 2 = 0.056 kg FJ
Product weight······························8.72 + 4.62 + 0.036 + 0.056 = 13.432 kg
FK
Spd
Contr

Ending

627
 SCS2 Series
SCP*3
How to order Code Description
A Mounting
Lubrication without switch(without magnet for switch) 00 Basic
CMK2 LB Axial foot
SCS2 LB 125 B 50 J Y FA Rod side flange
FB Head side flange
CMA2 No-lubrication without switch(without magnet for switch) CA Eye bracket
SCS2-N LB 125 B 50 J Y CB Clevis bracket (Pin and snap ring attached)
TC Intermediate trunnion
SCM No-lubrication with switch(built-in magnet for switch) TA Rod side trunnion
TB Head side trunnion
SCG SCS2-LN LB 125 B 50 T0H R J Y B Bore size (mm)
125 ø125
140 ø140
SCA2 160 ø160
Model No. A Mounting B Bore size 180 ø180
SCS2 200 ø200
250 ø250

CKV2
C Port thread
C Port thread Blank Rc thread
N NPT thread (made to order)
CAV2/ G G thread (made-to-order product)
COVP/N2
D Cushion
D Cushion B Both sides cushioned
SSD2 R Rod side cushioned
H Head side cushioned
SSG N Without cushion
E Stroke (mm)
E Stroke Bore size Stroke Note2 Available stroke Custom stroke
SSD
ø125 to ø160 1 to 800 2000
ø180 1 to 900 2000 In 1 mm
CAT ø200 1 to 1000 2000 increments
ø250 1 to 1200 2000
F Switch model No.
MDC2 F Switch model No. Lead wire Lead wire Lead

Reed Contact
Voltage
Indicator
Straight type L-shaped AC DC wire
MVC Precautions for model No. selection T0H* T0V* 1-color LED
T5H* T5V* No indicator lamp 2-wire
*1: Refer to page 627 for the min. stroke with switch. T8H* T8V* 1-color LED
SMG *2: When selecting TA or TB as mounting, the number of T1H* T1V*
switches is limited to "H" (1 on head side) for TA, and 2-wire
T2H* T2V* 1-color LED
MSD/ "R" (1 on rod side) for TB. T3H* T3V*
*3: I nstantaneous max. temp. is the temperature when 3-wire
MSDG T3PH* T3PV* 1-color LED (PNP output)
Proximity

sparks or cutting chips, etc., instantaneously contact the T2WH* T2WV*

bellows. 2-wire
FC* T2YH* T2YV*
*4:Check below for the cushion needle position indication.
2-color LED
T3WH* T3WV*
3-wire
*5: “I” and "Y" cannot be selected together. T3YH* T3YV*
STK T2YD* - 2-color LED
2-wire
T2YDT* - AC magnetic field
[Example of model No.] T2JH* T2JV* 1-color LED off-delay 2-wire
SRL3 * Lead wire length
SCS2-LN-LB-125B-50-T0H-R-JY Blank 1 m (standard)
3 m (option)
SRG3 Model: Medium bore size cylinder, double acting/Lubrication/ 3
5 5 m (option)
No-lubrication
Model No.: No-lubrication with switch Switch quantity
G Switch quantity
SRM3 G
R 1 on rod side
A Mounting : Axial foot *2 H 1 on head side
B Bore size : ø125 mm D 2
SRT3 C Port thread : Rc thread T 3
D Cushion : Both sides cushioned 4 4
MRL2 E Stroke : 50mm H Option
F Switch model No. : Reed T0H switch, lead wire 1m H Option C2 With cushion section check valve
G Switch quantity : 1 on rod side
*3 Max. ambient temp. Instantaneous max. temp.
MRG2 J Bellows 100°C 200°C
H Option : Bellows material for max. ambient temperature 100°C
L Bellows 250°C 400°C
SM‑25 I Accessory : Rod clevis M Piston rod, rod nut material (Stainless steel)
Blank Cushion needle position (standard) Standard

ShkAbs
Cushion needle position *4 R Cushion needle position R
T R
S Cushion needle position S
(Needle position with the port on the top when viewed from the rod end) T Cushion needle position T S
FJ P6 Copper and PTFE free (made to order)
Port Standard Certification of second class pressure vessel I Accessory
Stroke I Accessory I Rod eye
FK *5 Y Rod clevis (Pin and snap ring attached)
Bore size Stroke
B1 Eye bracket
Spd T R ø160 1948 or more B2 Clevis bracket (Pin and snap ring attached)
Contr ø180 1526 or more
ø200 946 or more
Ending S ø250 752 or more

628
 SCS2 Series
How to order/theoretical thrust table/internal structure
How to order switch SCP*3
Switch body + mounting bracket set Switch body only Mounting bracket set

SCS2-LN T0H 125 SW T0H SCS2-LN TS 125 CMK2

Switch model No. Bore size Switch model No. Mounting bracket Bore size CMA2
(Item F on (Item B on (Item F on TS T-switch (Item B on
page 628) page 628) page 628) page 628)
T T2YD switch
SCM
Theoretical thrust table (Unit: N)
Bore size Operating Working pressure MPa SCG
(mm) direction 0.05 0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
Push 6.14x102 1.23x103 1.84x103 2.45x103 3.68x103 4.91x103 6.14x103 7.36x103 8.59x103 9.82x103 1.10x104 1.23x104 SCA2
ø125
Pull 5.73x102 1.15x103 1.72x103 2.29x103 3.44x103 4.59x103 5.73x103 6.88x103 8.03x103 9.17x103 1.03x104 1.15x104
Push 7.70x102 1.54x103 2.31x103 3.08x103 4.62x103 6.16x103 7.70x103 9.24x103 1.08x104 1.23x104 1.39x104 1.54x104
ø140 SCS2
Pull 7.29x102 1.46x103 2.19x103 2.92x103 4.38x103 5.84x103 7.29x103 8.75x103 1.02x104 1.17x104 1.31x104 1.46x104
Push 1.01x103 2.01x103 3.02x103 4.02x103 6.03x103 8.04x103 1.01x104 1.21x104 1.41x104 1.61x104 1.81x104 2.01x104
ø160 CKV2
Pull 9.42x102 1.88x103 2.83x103 3.77x103 5.65x103 7.54x103 9.42x103 1.13x104 1.32x104 1.51x104 1.70x104 1.88x104
Push 1.27x103 2.54x103 3.82x103 5.09x103 7.63x103 1.02x104 1.27x104 1.53x104 1.78x104 2.04x104 2.29x104 2.54x104 CAV2/
ø180
Pull 1.19x103 2.39x103 3.58x103 4.77x103 7.16x103 9.54x103 1.19x104 1.43x104 1.67x104 1.91x104 2.15x104 2.39x104 COVP/N2
Push 1.57x103 3.14x103 4.71x103 6.28x103 9.42x103 1.26x104 1.57x104 1.88x104 2.20x104 2.51x104 2.83x104 3.14x104
ø200 SSD2
Pull 1.47x103 2.95x103 4.42x103 5.89x103 8.84x103 1.18x104 1.47x104 1.77x104 2.06x104 2.36x104 2.65x104 2.95x104
Push 2.45x103 4.91x103 7.36x103 9.82x103 1.47x104 1.96x104 2.45x104 2.95x104 3.44x104 3.93x104 4.42x104 4.91x104
ø250 SSG
Pull 2.31x103 4.63x103 6.94x103 9.25x103 1.39x104 1.85x104 2.31x104 2.78x104 3.24x104 3.70x104 4.16x104 4.63x104

Internal structure and parts list SSD

Standard 11 12 16 16 22
SCS2-(L)(N)
CAT
21 19 20
12 13 14 15 16 17 MDC2
For ‌ø200, For For
ø250 SCS2-N SCS2-LN MVC
18
SMG
MSD/
MSDG

FC*
1 2 3 4 5 6 7 8 9 10
STK
Note: 14 , 19 , 20 and 21 are not required for the type without cushion.
No. Part name Material Remarks No. Part name Material Remarks SRL3
1 Hexagon nut Steel Zinc chromate 13 Cylinder gasket Nitrile rubber
2 Bush Iron-copper oil-impregnated bearing alloy 14 Cushion packing Nitrile rubber/steel SRG3
3 Rod cover Aluminum alloy casting Chromate 15 Cylinder tube Aluminum alloy Hard alumite
4 Tie rod Steel Zinc chromate 16 Piston packing Nitrile rubber SRM3
5 Piston rod Steel Industrial chrome plating 17 Wear ring Polyacetal resin Fiber-reinforced phenolic resin (ø250)
6 Cushion ring A Steel Zinc chromate 18 Cushion ring B Steel Zinc chromate SRT3
7 Piston gasket Nitrile rubber Copper alloy (ø125 to ø180)
19 Cushion needle
8 Piston Aluminum alloy casting Steel (ø200, 250) Zinc chromate MRL2
9 Head cover Aluminum alloy casting Chromate 20 Hexagon nut Steel Zinc chromate
10 Hexagon nut Steel Zinc chromate 21 Needle gasket Nitrile rubber MRG2
11 Dust wiper Nitrile rubber ø200 and ø250 only 22 Magnet Rubber SCS2-LN only
12 Rod packing Nitrile rubber SM‑25
Repair parts list Mounting bracket material ShkAbs
SCS2 (lubrication) SCS2-(L)N (no-lubrication) Mounting Material Remarks
Bore size (mm) Repair parts No.
Kit No. Kit No. LB Steel Paint
FJ
ø125 SCS2-125K SCS2-N-125K FA,FB Steel Paint
ø140 SCS2-140K SCS2-N-140K CA,CB Cast iron Paint FK
12 13 14 16 17 21
ø160 SCS2-160K SCS2-N-160K TA,TB,TC Cast iron Paint
ø180 SCS2-180K SCS2-N-180K Spd
ø200 SCS2-200K SCS2-N-200K
Contr
11 12 13 14 16 17 21
ø250 SCS2-250K SCS2-N-250K
Ending
*1: Of the no-lubrication repair parts, the piston packing is different from that of the lubrication.

629
 SCS2 Series
SCP*3
Dimensions
Basic (00)
CMK2
MN
CMA2

MO
(Width across flats)
SCM

SCG X + stroke
A WF LL + stroke (M)
SCA2 V GA A View 30 HD1
K QA GB
X + L + stroke N C RD1 30 QB
SCS2 8-D
A WF + L P T
U
2-EE
b
CKV2

øMM
P1
L
CAV2/
COVP/N2
ød

øJ
N
K

T R
SSD2 KK
Width across flats B
SSG S
[With bellows]
SSD
2-color LED with strong magnetic field proof switch
CAT
RD2 HD2
MDC2
P2

MVC
F P

F P

Rod side Head side

SMG
I I
MSD/
MSDG

FC*
RD: Rod side max. sensitivity position
Port position diagram (A View) HD: Head side max. sensitivity position
STK

SRL3 *1 : , and indicate the cushion needle position.

*2 : L dimensions below decimal point are rounded up.
SRG3 *3 : For the dimensions of the accessories, refer to page 639.
Code Basic (00) Basic dimensions
SRM3 Bore size (mm) A B C D EE GA GB F I J K KK L LL M MM MN MO N P QA QB
ø125 50 46 47 M14x1.5 Rc1/2 30.5 30.5 20 16 57 140 M30x1.5 78 to 82 92 13.5 32 15 27 110 13 15 15
SRT3 ø140 50 46 47 M14x1.5 Rc3/4 34.5 34.5 20 20 57 157 M30x1.5 86.5 to 91 103 13.5 32 15 27 124 15 17 17
ø160 56 55 53 M16x1.5 Rc3/4 34.5 34.5 24 20 62 177 M36x1.5 96.5 to 101 106 15.5 40 15 36 142 15 17 17
MRL2 ø180 63 60 60 M18x1.5 Rc3/4 34.5 34.5 24 20 68 200 M40x1.5 108 to 112 110 17.5 45 17 41 160 15 17 17
ø200 72 70 69 M20x1.5 Rc3/4 37.5 37.5 24 20.5 75 220 M45x1.5 120.5 to 129 123 18.5 50 20 46 175 20 18 18
MRG2 ø250 88 85 84 M24x1.5 Rc1 42.5 42.5 24 20.5 93 274 M56x2 147.5 to 156 141 21.5 60 22 55 216 22 21 21
Code With bellows With switch T0, T5, T2, T3 T2W, T3W T2Y, T3Y, T2YD, T1, T2J T8
SM‑25 Bore size (mm) T U V WF X b d L P1 P2 RD1 HD1 RD1 HD1 RD2 HD2 RD2 HD2
ø125 18 19 45.5 65 220.5 74 75 (Stroke/4.55) + 11 76 80 8.5 4.0 10.5 5.5 7.5 2.5 2.5 0.0
ShkAbs ø140 18 19 45.5 67 233.5 74 75 (Stroke/4.55) + 9 82 86 8.5 7.0 10.5 8.5 7.5 5.5 2.5 0.5
ø160 21 19 48 71 248.5 82 82 (Stroke/5.15) + 9 90 95 10.5 8.0 12.5 10.0 9.5 7.0 4.5 1.5
FJ ø180 24 19 53 78 268.5 91 91 (Stroke/5.15) + 9 98 103 13.0 9.5 14.5 11.5 11.5 8.5 6.5 3.5
ø200 27 24 60 88 301.5 102 95 (Stroke/5.30) + 9 106 111 17.5 13.0 19.0 15.0 16.0 12.0 11.0 7.0
FK ø250 34 24 64 94 344.5 120 120 (Stroke/6.40) + 9 126 130 18.5 19.0 20.5 20.5 17.5 17.5 12.5 12.5

Spd
Contr

Ending

630
 SCS2 Series
Double acting/single rod/lubrication/no-lubrication
Dimensions SCP*3
Axial foot (LB)
CMK2

CMA2
SC + stroke

A WF LL + stroke SCM
K GA GB
C V A View
N
øMM QA QB SCG
P 8-D
T U 2-EE
SCA2
L

SCS2
H

øJ
N

T R CKV2
KK
AH
AT

CAV2/
S Width across flats B COVP/N2

AO AU AU AO SSD2
TR
4-øAB SB SA + stroke
TS
SSG

SSD

CAT
A WF + L
b MDC2

MVC
F P

F P
ød

Rod side Head side SMG

I I MSD/
MSDG

FC*
SB + L

STK
[With bellows] Port position diagram (A View)

SRL3

SRG3

SRM3
*1 : Refer to page 630 for switch dimensions with switch. *3 : L dimensions below decimal point are rounded up.
*2 : , and indicate the cushion needle position. *4 : For the dimensions of the accessories, refer to page 639. SRT3
Code Axial foot (LB) Basic dimensions
MRL2
Bore size (mm) A AB AH AT AO AU B C D EE GA GB F I H J K KK L LL
ø125 50 19 85 7 19 45 46 47 M14x1.5 Rc1/2 30.5 30.5 20 16 70 57 140 M30x1.5 78 to 82 92
MRG2
ø140 50 19 100 8 20 50 46 47 M14x1.5 Rc3/4 34.5 34.5 20 20 78.5 57 157 M30x1.5 86.5 to 91 103
ø160 56 19 106 10 20 53 55 53 M16x1.5 Rc3/4 34.5 34.5 24 20 88.5 62 177 M36x1.5 96.5 to 101 106
SM‑25
ø180 63 24 125 10 27 60 60 60 M18x1.5 Rc3/4 34.5 34.5 24 20 100 68 200 M40x1.5 108 to 112 110
ø200 72 24 132 12 27 62 70 69 M20x1.5 Rc3/4 37.5 37.5 24 20.5 110 75 220 M45x1.5 120.5 to 129 123
ShkAbs
ø250 88 29 160 12 28 70 85 84 M24x1.5 Rc1 42.5 42.5 24 20.5 137 93 274 M56x2 147.5 to 156 141
Code With bellows
FJ
Bore size (mm) MM MN MO N P QA QB SA SB SC T TR TS U V WF b d L
ø125 32 15 27 110 13 15 15 182 20 271 18 100 140 19 45.5 65 74 75 (Stroke/4.55) + 11
FK
ø140 32 15 27 124 15 17 17 203 17 290 18 112 157 19 45.5 67 74 75 (Stroke/4.55) + 9
ø160 40 16 36 142 15 17 17 212 18 306 21 118 177 19 48 71 82 80 (Stroke/5.15) + 9 Spd
ø180 45 18 41 160 15 17 17 230 18 338 24 132 200 19 53 78 91 90 (Stroke/5.15) + 9 Contr
ø200 50 20 46 175 20 18 18 247 26 372 27 150 220 24 60 88 102 95 (Stroke/5.30) + 9
ø250 60 22 55 216 22 21 21 281 24 421 34 180 274 24 64 94 120 120 (Stroke/6.40) + 9
Ending

631
 SCS2 Series
SCP*3
Dimensions
Rod side flange (FA)
CMK2

CMA2
(X + stroke)
A WF LL + stroke (M)
SCM
C V GA A View GB
K
SCG N øMM QA QB
8-D 2-EE
P U
T
SCA2

øJ
L
SCS2 øY
N
R
E

CKV2 T R

CAV2/ KK
COVP/N2
S Width across flats B MF
SSD2 TF
UF 4-øFB W (XB + stroke)

SSG

SSD

CAT
A WF + L
MDC2 b

MVC
F P

F P
ød

SMG Rod side Head side

MSD/ I I
MSDG
W+L
FC*

STK
[With bellows] Port position diagram (A View)

SRL3

SRG3

SRM3
*1 : Refer to page 630 for switch dimensions with switch. *3 : L dimensions below decimal point are rounded up.
SRT3 *2 : , and indicate the cushion needle position. *4 : For the dimensions of the accessories, refer to page 639.
Code Rod side flange (FA) Basic dimensions
MRL2
Bore size (mm) A B C D E EE FB GA GB F I J K KK L LL M MF MM
ø125 50 46 47 M14x1.5 140 Rc1/2 19 30.5 30.5 20 16 57 140 M30x1.5 78 to 82 92 11 14 32
MRG2
ø140 50 46 47 M14x1.5 157 Rc3/4 19 34.5 34.5 20 20 57 157 M30x1.5 86.5 to 91 103 11 19 32
ø160 56 55 53 M16x1.5 177 Rc3/4 19 34.5 34.5 24 20 62 177 M36x1.5 96.5 to 101 106 13 19 40
SM‑25
ø180 63 60 60 M18x1.5 200 Rc3/4 24 34.5 34.5 24 20 68 200 M40x1.5 108 to 112 110 15 25 45
ø200 72 70 69 M20x1.5 220 Rc3/4 24 37.5 37.5 24 20.5 75 220 M45x1.5 120.5 to 129 123 16 25 50
ShkAbs
ø250 88 85 84 M24x1.5 274 Rc1 29 42.5 42.5 24 20.5 93 274 M56x2 147.5 to 156 141 19 30 60
Code With bellows
FJ
Bore size (mm) N QA QB P R T TF UF U V W WF X XB Y b d L
ø125 110 15 15 13 100 18 190 230 19 45.5 51 65 218 117 94 74 75 (Stroke/4.55) + 11
FK
ø140 124 17 17 15 112 18 212 250 19 45.5 48 67 231 133 94 74 75 (Stroke/4.55) + 9
Spd ø160 142 17 17 15 118 21 236 280 19 48 52 71 246 138 107 82 80 (Stroke/5.15) + 9
Contr ø180 160 17 17 15 132 24 265 310 19 53 53 78 266 150 113 91 90 (Stroke/5.15) + 9
ø200 175 18 18 20 150 27 280 330 24 60 63 88 299 164 131 102 95 (Stroke/5.30) + 9
Ending ø250 216 21 21 22 180 34 355 415 24 64 64 94 342 190 153 120 120 (Stroke/6.40) + 9

632
 SCS2 Series
Double acting/single rod/lubrication/no-lubrication
Dimensions SCP*3
Head side flange (FB)
CMK2

CMA2
ZC + stroke
A WF LL + stroke MF SCM
C V GA A View GB K
QA QB N SCG
øMM 2-EE 8-D
P
U
T
SCA2
øJ

L
øY SCS2

R
N
E
R T CKV2
KK
CAV2/
Width across flats B COVP/N2
S
ZR + stroke TF SSD2
4-øFB
UF

SSG

SSD

CAT
A WF + L
b
MDC2

MVC
F P

F P
ød

Rod side Head side SMG

I I MSD/
MSDG

ZR + L + stroke FC*

STK
[With bellows] Port position diagram (A View)

SRL3

SRG3

SRM3
*1 : Refer to page 630 for switch dimensions with switch. *3 : L dimensions below decimal point are rounded up.
*2 : , and indicate the cushion needle position. *4 : For the dimensions of the accessories, refer to page 639. SRT3
Code Head side flange (FB) Basic dimensions
MRL2
Bore size (mm) A B C D E EE FB GA GB F I J K KK L LL MF MM
ø125 50 46 47 M14x1.5 140 Rc1/2 19 30.5 30.5 20 16 57 140 M30x1.5 78 to 82 92 14 32
MRG2
ø140 50 46 47 M14x1.5 157 Rc3/4 19 34.5 34.5 20 20 57 157 M30x1.5 86.5 to 91 103 19 32
ø160 56 55 53 M16x1.5 177 Rc3/4 19 34.5 34.5 24 20 62 177 M36x1.5 96.5 to 101 106 19 40
SM‑25
ø180 63 60 60 M18x1.5 200 Rc3/4 24 34.5 34.5 24 20 68 200 M40x1.5 108 to 112 110 25 45
ø200 72 70 69 M20x1.5 220 Rc3/4 24 37.5 37.5 24 20.5 75 220 M45x1.5 120.5 to 129 123 25 50
ShkAbs
ø250 88 85 84 M24x1.5 274 Rc1 29 42.5 42.5 24 20.5 93 274 M56x2 147.5 to 156 141 30 60
Code With bellows
FJ
Bore size (mm) N QA QB P R T TF U UF V WF Y ZC ZR b d L
ø125 110 15 15 13 100 18 190 19 230 45.5 65 94 221 171 74 75 (Stroke/4.55) + 11
FK
ø140 124 17 17 15 112 18 212 19 250 45.5 67 94 239 189 74 75 (Stroke/4.55) + 9
ø160 142 17 17 15 118 21 236 19 280 48 71 107 252 196 82 80 (Stroke/5.15) + 9 Spd
ø180 160 17 17 15 132 24 265 19 310 53 78 113 276 213 91 90 (Stroke/5.15) + 9 Contr
ø200 175 18 18 20 150 27 280 24 330 60 88 131 308 236 102 95 (Stroke/5.30) + 9
ø250 216 21 21 22 180 34 355 24 415 64 94 153 353 265 120 120 (Stroke/6.40) + 9
Ending

633
 SCS2 Series
SCP*3
Dimensions
Eye bracket (CA)
CMK2

CMA2
XC + stroke
SCM A WF LL + stroke CF
C V GA A View GB K
SCG øMM QA QB N
2-EE 8-D
U CC P
T
SCA2
øJ

L
SCS2

N
K
CKV2 R T
KK R MR
CAV2/
COVP/N2 Width across flats B

øC
DH
S
SSD2 XD + stroke -0.1
EW -0.4

10
SSG

SSD

CAT XC + L + stroke

A WF + L
MDC2 b

MVC
F P

F P
ød

SMG Rod side Head side

MSD/ I I
MSDG

FC* XD + L + stroke

STK
[With bellows] Port position diagram (A View)

SRL3

SRG3

SRM3
*1 : Refer to page 630 for switch dimensions with switch. *3 : L dimensions below decimal point are rounded up.
SRT3 *2 : , and indicate the cushion needle position. *4 :For the dimensions of the accessories, refer to page 639.
Code Eye bracket (CA) Basic dimensions
MRL2
Bore size (mm) A B C D CC CD CF EE EW GA GB F I J K KK L
ø125 50 46 47 M14x1.5 35 25 20 Rc1/2 32 30.5 30.5 20 16 57 140 M30x1.5 78 to 82
MRG2
ø140 50 46 47 M14x1.5 40 28 22 Rc3/4 36 34.5 34.5 20 20 57 157 M30x1.5 86.5 to 91
ø160 56 55 53 M16x1.5 40 32 24 Rc3/4 40 34.5 34.5 24 20 62 177 M36x1.5 96.5 to 101
SM‑25
ø180 63 60 60 M18x1.5 55 40 25 Rc3/4 50 34.5 34.5 24 20 68 200 M40x1.5 108 to 112
ø200 72 70 69 M20x1.5 55 40 30 Rc3/4 50 37.5 37.5 24 20.5 75 220 M45x1.5 120.5 to 129
ShkAbs
ø250 88 85 84 M24x1.5 65 50 35 Rc1 63 42.5 42.5 24 20.5 93 274 M56x2 147.5 to 156
Code With bellows
FJ
Bore size (mm) LL MM MR N P QA QB T U V WF XC XD b d L
ø125 92 32 25 110 13 15 15 18 19 45.5 65 295 220 74 75 (Stroke/4.55) + 11
FK
ø140 103 32 28 124 15 17 17 18 19 45.5 67 323 245 74 75 (Stroke/4.55) + 9
Spd ø160 106 40 32 142 15 17 17 21 19 48 71 340 252 82 80 (Stroke/5.15) + 9
Contr ø180 110 45 40 160 15 17 17 24 19 53 78 381 278 91 90 (Stroke/5.15) + 9
ø200 123 50 40 175 20 18 18 27 24 60 88 413 301 102 95 (Stroke/5.30) + 9
Ending ø250 141 60 50 216 22 21 21 34 24 64 94 483 345 120 120 (Stroke/6.40) + 9

634
 SCS2 Series
Double acting/single rod/lubrication/no-lubrication
Dimensions SCP*3
Clevis bracket (CB)
CMK2

CMA2

XC + stroke SCM
A WF LL + stroke CF
C V GA GB K
A View SCG
QA 2-EE N
QB 8-D
T U CC P
SCA2

L
SCS2
øJ

N
K
R T CKV2
KK
R MR
CAV2/
øMM

øC
COVP/N2

DH1
Width across flats B

0
XD + stroke S
+ 0.4
SSD2
CB + 0.1

-0.1
UB -0.4
SSG

SSD

CAT
XC + L + stroke
A WF + L
b
MDC2

MVC
F P

F P
Rod side Head side SMG
ød

I I MSD/
MSDG

XD + L + stroke FC*

STK
[With bellows] Port position diagram (A View)

SRL3

SRG3

SRM3
*1 : Refer to page 630 for switch dimensions with switch. *4 : For the dimensions of the accessories, refer to page 639.
*2 : , and indicate the cushion needle position. *5 : A pin and a snap ring are included.
*3 : L dimensions below decimal point are rounded up. SRT3
Code Clevis bracket (CB) Basic dimensions
MRL2
Bore size (mm) A B C D CB CC CD CF EE GA GB F I J K KK L
ø125 50 46 47 M14x1.5 32 35 25 20 Rc1/2 30.5 30.5 20 16 57 140 M30x1.5 78 to 82
MRG2
ø140 50 46 47 M14x1.5 36 40 28 22 Rc3/4 34.5 34.5 20 20 57 157 M30x1.5 86.5 to 91
ø160 56 55 53 M16x1.5 40 40 32 24 Rc3/4 34.5 34.5 24 20 62 177 M36x1.5 96.5 to 101
SM‑25
ø180 63 60 60 M18x1.5 50 55 40 25 Rc3/4 34.5 34.5 24 20 68 200 M40x1.5 108 to 112
ø200 72 70 69 M20x1.5 50 55 40 30 Rc3/4 37.5 37.5 24 20.5 75 220 M45x1.5 120.5 to 129
ShkAbs
ø250 88 85 84 M24x1.5 63 65 50 35 Rc1 42.5 42.5 24 20.5 93 274 M56x2 147.5 to 156
Code With bellows
FJ
Bore size (mm) LL MM MR N P QA QB T U UB V WF XC XD b d L
ø125 92 32 25 110 13 15 15 18 19 64 45.5 65 295 220 74 75 (Stroke/4.55) + 11
FK
ø140 103 32 28 124 15 17 17 18 19 72 45.5 67 323 245 74 75 (Stroke/4.55) + 9
ø160 106 40 32 142 15 17 17 21 19 80 48 71 340 252 82 80 (Stroke/5.15) + 9 Spd
ø180 110 45 40 160 15 17 17 24 19 100 53 78 381 278 91 90 (Stroke/5.15) + 9 Contr
ø200 123 50 40 175 20 18 18 27 24 100 60 88 413 301 102 95 (Stroke/5.30) + 9
ø250 141 60 50 216 22 21 21 34 24 126 64 94 483 345 120 120 (Stroke/6.40) + 9
Ending

635
 SCS2 Series
SCP*3
Dimensions
Intermediate trunnion (TC)
CMK2

CMA2

SCM (X + Stroke)
A WF LL + Stroke (M)
K C V GA A View GB
SCG N QA
8-D 2-EE QB
P
T U
SCA2

øTDe8
L
SCS2 T R
TN

øJ
K
N

CKV2

øMM
R

KK
TR

CAV2/
COVP/N2
Width across flats B
S CE
SSD2 AQ
TC
TM
Stroke Stroke
SSG UM XV +
2
XL +
2

SSD

CAT X + L + stroke
A WF + L
MDC2 b

MVC
F P

F P
SMG
ød

Rod side Head side

MSD/ I I
MSDG

FC* Stroke
XV + L+
2
STK
[With bellows] Port position diagram (A View)

SRL3

SRG3

SRM3
*1 : Refer to page 630 for switch dimensions with switch. *4 : For the dimensions of the accessories, refer to page 639.
*2 : , and indicate the cushion needle position. *5 : Refer to page 626 for the min. stroke.
SRT3 *3 : L dimensions below decimal point are rounded up.
Code Intermediate trunnion (TC) Basic dimensions
MRL2
Bore size (mm) A AQ B C CE D EE GA GB F I J K KK L LL M MM
ø125 50 46 + St/2 46 47 50 M14x1.5 Rc1/2 30.5 30.5 20 16 57 140 M30x1.5 78 to 82 92 11 32
MRG2
ø140 50 51.5 + St/2 46 47 55 M14x1.5 Rc3/4 34.5 34.5 20 20 57 157 M30x1.5 86.5 to 91 103 11 32
ø160 56 53 + St/2 55 53 60 M16x1.5 Rc3/4 34.5 34.5 24 20 62 177 M36x1.5 96.5 to 101 106 13 40
SM‑25
ø180 63 55 + St/2 60 60 65 M18x1.5 Rc3/4 34.5 34.5 24 20 68 200 M40x1.5 108 to 112 110 15 45
ø200 72 61.5 + St/2 70 69 70 M20x1.5 Rc3/4 37.5 37.5 24 20.5 75 220 M45x1.5 120.5 to 129 123 16 50
ShkAbs
ø250 88 70.5 + St/2 85 84 80 M24x1.5 Rc1 42.5 42.5 24 20.5 93 274 M56x2 147.5 to 156 141 19 60
Code With bellows
FJ
Bore size (mm) N P QA QB T TC TD TM TN TR U UM V WF X XV XL b d L
ø125 110 13 15 15 18 150 32 170 150 2 19 234 45.5 65 218 111 57 74 75 (Stroke/4.55) + 11
FK
ø140 124 15 17 17 18 154 36 190 170 2 19 262 45.5 67 231 118.5 62.5 74 75 (Stroke/4.55) + 9
Spd ø160 142 15 17 17 21 190 40 212 190 2 19 292 48 71 246 124 66 82 80 (Stroke/5.15) + 9
Contr ø180 160 15 17 17 24 210 45 236 210 2 19 326 53 78 266 133 70 91 90 (Stroke/5.15) + 9
ø200 175 20 18 18 27 242 45 265 242 2 24 355 60 88 299 149.5 77.5 102 95 (Stroke/5.30) + 9
Ending ø250 216 22 21 21 34 300 56 335 300 2 24 447 64 94 342 164.5 89.5 120 120 (Stroke/6.40) + 9

636
 SCS2 Series
Double acting/single rod/lubrication/no-lubrication
Dimensions SCP*3
Rod side trunnion (TA)
CMK2

CMA2

(X + stroke) SCM
A WF LL + stroke (M)
K V GA A View GB
C
N SCG
8-D QA 2-EE QB
P T U
SCA2

øTDe8
L
T R SCS2
TN

øJ
N
K

CKV2
KK
R
TR

øMM
CAV2/
COVP/N2
Width across flats B
S CE
TC
XG (XH + stroke) SSD2
TM
UM
SSG

SSD

CAT
A WF +L
b
MDC2

MVC
F P

F P
ød

Rod side Head side SMG

I I MSD/
MSDG

XG +L FC*

STK
[With bellows] Port position diagram (A View)

SRL3

SRG3

SRM3
*1 : Refer to page 630 for switch dimensions with switch. *4 : For the dimensions of the accessories, refer to page 639.
*2 : , and indicate the cushion needle position. *5 : Refer to page 626 for the min. stroke.
*3 : L dimensions below decimal point are rounded up. *6 : Position cannot be detected at rod side stroke end. SRT3
Code Rod side trunnion (TA) Basic dimensions
MRL2
Bore size (mm) A B C CE D EE GA GB F I J K KK L LL M MM
ø125 50 46 47 50 M14x1.5 Rc1/2 30.5 30.5 20 16 57 140 M30x1.5 78 to 82 92 11 32
MRG2
ø140 50 46 47 55 M14x1.5 Rc3/4 34.5 34.5 20 20 57 157 M30x1.5 86.5 to 91 103 11 32
ø160 56 55 53 60 M16x1.5 Rc3/4 34.5 34.5 24 20 62 177 M36x1.5 96.5 to 101 106 13 40
SM‑25
ø180 63 60 60 65 M18x1.5 Rc3/4 34.5 34.5 24 20 68 200 M40x1.5 108 to 112 110 15 45
ø200 72 70 69 70 M20x1.5 Rc3/4 37.5 37.5 24 20.5 75 220 M45x1.5 120.5 to 129 123 16 50
ShkAbs
ø250 88 85 84 80 M24x1.5 Rc1 42.5 42.5 24 20.5 93 274 M56x2 147.5 to 156 141 19 60
Code With bellows
FJ
Bore size (mm) N P QA QB T TC TD TM TN TR U UM V WF X XG XH b d L
ø125 110 13 15 15 18 150 32 170 150 2 19 234 45.5 65 218 126 42 74 75 (Stroke/4.55) + 11
FK
ø140 124 15 17 17 18 154 36 190 170 2 19 262 45.5 67 231 134.5 46.5 74 75 (Stroke/4.55) + 9
ø160 142 15 17 17 21 190 40 212 190 2 19 292 48 71 246 141 49 82 80 (Stroke/5.15) + 9 Spd
ø180 160 15 17 17 24 210 45 236 210 2 19 326 53 78 266 150.5 52.5 91 90 (Stroke/5.15) + 9 Contr
ø200 175 20 18 18 27 242 45 265 242 2 24 355 60 88 299 168 59 102 95 (Stroke/5.30) + 9
ø250 216 22 21 21 34 300 56 335 300 2 24 447 64 94 342 184 70 120 120 (Stroke/6.40) + 9
Ending

637
 SCS2 Series
SCP*3
Dimensions
Head side trunnion (TB)
CMK2

CMA2

SCM (X + stroke)
A WF LL + stroke (M)
C V GA A View GB K
SCG QA N
2-EE QB 8-D
P
T U
SCA2

øTDe8
L
SCS2 T R

TN
øJ

K
N
CKV2
KK

R TR
øMM

CAV2/
COVP/N2
Width across flats B
CE S
SSD2 XJ + stroke (XK) TC
TM
SSG UM

SSD

CAT
A WF +L
MDC2 b

MVC
F P

F P
ød

SMG Rod side Head side

MSD/ I I
MSDG
XJ + L + stroke
FC*

STK
[With bellows] Port position diagram (A View)

SRL3

SRG3

SRM3
*1 : Refer to page 630 for switch dimensions with switch. *4 : For the dimensions of the accessories, refer to page 639.
*2 : , and indicate the cushion needle position. *5 : Refer to page 626 for the min. stroke.
SRT3 *3 : L dimensions below decimal point are rounded up. *6 : Position cannot be detected at head side stroke end.
Code Head side trunnion (TB) Basic dimensions
MRL2
Bore size (mm) A B C CE D EE GA GB F I J K KK L LL M MM
ø125 50 46 47 50 M14x1.5 Rc1/2 30.5 30.5 20 16 57 140 M30x1.5 78 to 82 92 11 32
MRG2 ø140 50 46 47 55 M14x1.5 Rc3/4 34.5 34.5 20 20 57 157 M30x1.5 86.5 to 91 103 11 32
ø160 56 55 53 60 M16x1.5 Rc3/4 34.5 34.5 24 20 62 177 M36x1.5 96.5 to 101 106 13 40
SM‑25
ø180 63 60 60 65 M18x1.5 Rc3/4 34.5 34.5 24 20 68 200 M40x1.5 108 to 112 110 15 45
ø200 72 70 69 70 M20x1.5 Rc3/4 37.5 37.5 24 20.5 75 220 M45x1.5 120.5 to 129 123 16 50
ShkAbs
ø250 88 85 84 80 M24x1.5 Rc1 42.5 42.5 24 20.5 93 274 M56x2 147.5 to 156 141 19 60
Code With bellows
FJ
Bore size (mm) N P QA QB T TC TD TM TN TR U UM V WF X XJ XK b d L
ø125 110 13 15 15 18 150 32 170 150 2 19 234 45.5 65 218 96 72 74 75 (Stroke/4.55) + 11
FK
ø140 124 15 17 17 18 154 36 190 170 2 19 262 45.5 67 231 102.5 78.5 74 75 (Stroke/4.55) + 9
Spd ø160 142 15 17 17 21 190 40 212 190 2 19 292 48 71 246 107 83 82 80 (Stroke/5.15) + 9
Contr ø180 160 15 17 17 24 210 45 236 210 2 19 326 53 78 266 115.5 87.5 91 90 (Stroke/5.15) + 9
ø200 175 20 18 18 27 242 45 265 242 2 24 355 60 88 299 131 96 102 95 (Stroke/5.30) + 9
Ending ø250 216 22 21 21 34 300 56 335 300 2 24 447 64 94 342 145 109 120 120 (Stroke/6.40) + 9

638
 SCS2 Series
Common accessory dimensions
SCS2 Series common accessory dimensions SCP*3
Rod eye for SCS2 (I) Material: ‌Steel Rod clevis for SCS2 (Y) UB Material: ‌Cast iron
-0.1
CB -0.4 Painted CDH10 Painted CMK2
CDH10 R RR CB +0.4
+0.1
R

CMA2

MC

MB
MA
SCM
45

CA
CA

AB
SCG
AA

KK KK (D)
SCA2
øD (E)

Code Weight Code Wt SCS2

AA CA CB CD D KK MA MC R AB CA CB CD D E KK MB RR UB
Model No. (kg) Model No. (kg)
SCS2-125-I 50 85 32 25 55 M30x1.5 32 27.5 15.5 1.25 SCS2-125-Y 50 85 32 25 46 53.1 M30x1.5 35 27.5 64 1.30 CKV2
SCS2-140-I 50 90 36 28 60 M30x1.5 35 30 18 1.65 SCS2-140-Y 50 90 36 28 46 53.1 M30x1.5 40 30 72 1.65
CAV2/
SCS2-160-I 60 105 40 32 70 M36x1.5 40 35 21 2.55 SCS2-160-Y 60 105 40 32 55 63.5 M36x1.5 45 35 80 2.55
COVP/N2
SCS2-180-I 65 115 50 40 85 M40x1.5 47.5 42.5 29 4.20 SCS2-180-Y 65 115 50 40 60 69.3 M40x1.5 50 42.5 100 4.40
SCS2-200-I 75 125 50 40 85 M45x1.5 47.5 42.5 29 4.35 SCS2-200-Y 75 125 50 40 70 80.8 M45x1.5 50 42.5 100 4.85 SSD2
SCS2-250-I 88 150 63 50 105 M56x2 57.5 52.5 36.5 8.05 SCS2-250-Y 88 150 63 50 85 98.1 M56x2 62 52.5 126 7.05
Note: A pin and a snap ring are included. SSG
Eye bracket for SCS2 (B1) Material: ‌Cast iron Pin (P) Material: S
‌ teel
E A Painted Zinc chromate treatment SSD
F 4-D K
G EW -0.1
-0.4
CAT
CC 4-C A

øCDe8
C B C MDC2

øD
R MR
MVC
K
A

CDH10 SMG
MSD/
MSDG
Code Weight Code Applicable Wt Compatible
A C CC CD D E EW F G K MR A B C CD D
Model No. (kg) Model No. snap ring (kg) model FC*
SCS2-125-B1 140 16 35 25 23 63 32 20 18 110 25 2.35 SCS2-125-P 75 66.3 1.35 25 23.9 C type for shaft 25 0.25 SCS2-125
SCS2-140-B1 154 16 40 28 23 75 36 22 20 124 28 3.30 SCS2-140-P 84 74.7 1.65 28 26.6 C type for shaft 28 0.40 SCS2-140 STK
SCS2-160-B1 174 18 40 32 26 75 40 24 22 142 32 4.65 SCS2-160-P 92 82.7 1.65 32 30.3 C type for shaft 32 0.50 SCS2-160
SCS2-180-B1 196 20 55 40 29 90 50 25 23 160 40 6.75 SCS2-180-P 115 103.2 1.9 40 38 C type for shaft 40 1.15 SCS2- 180
200 SRL3
SCS2-200-B1 220 22 55 40 32 90 50 30 28 175 40 9.40 SCS2-250-P 144 129.6 2.2 50 47 C type for shaft 50 2.25 SCS2-250
SCS2-250-B1 274 26 65 50 39 110 63 35 33 216 50 16.85 Note: A
‌ pin and a snap ring are included with the clevis, clevis SRG3
bracket and rod clevis.
Clevis bracket for SCS2 (B2) Material: ‌Cast iron The pin includes a snap ring.
E A Painted SRM3
F K
4-D
G UB SRT3
+0.4
CC 4-C CB +0.1

MRL2
R MR
MRG2
K
A

CDH10 SM‑25

ShkAbs
Code Weight
A C CB CC CD D E F G K MR UB
Model No. (kg) FJ
SCS2-125-B2 140 16 32 35 25 23 63 20 18 110 25 64 2.65
SCS2-140-B2 154 16 36 40 28 23 75 22 20 124 28 72 3.85 FK
SCS2-160-B2 174 18 40 40 32 26 75 24 22 142 32 80 5.45
SCS2-180-B2 196 20 50 55 40 29 90 25 23 160 40 100 8.70
Spd
Contr
SCS2-200-B2 220 22 50 55 40 32 90 30 28 175 40 100 10.55
SCS2-250-B2 274 26 63 65 50 39 110 35 33 216 50 126 19.55
Ending
Note: A pin and a snap ring are included.

639
 Large bore size cylinder
Double acting/push side stroke adjustable

SCP*3
SCS2-P Series
Bore size: ø125/ø140/ø160/ø180/ø200/ø250
CMK2
JIS symbol
CMA2

SCM * Made-to-order product.

Specifications
SCG Item SCS2-P (Stroke adjustable)
Bore size mm ø125 ø140 ø160 ø180 ø200 ø250
SCA2 Actuation Double acting
Working fluid Compressed air
SCS2 Max. working pressure MPa 1.0 (≈150 psi, 10 bar)
Min. working pressureMPa 0.1 (≈15 psi, 1 bar)
CKV2 Proof pressure MPa 1.6 (≈230 psi, 16 bar)
Ambient temperature °C -5 (23°F) to 60 (140°F) (no freezing)
CAV2/
COVP/N2 Port size Rc1/2 Rc3/4 Rc1
+1.0 +1.4 +1.8
Stroke tolerance mm 0 ( to 300), 0 ( to 1000), 0 ( to 1200)
SSD2 Working piston speed mm/s 20 to 1000 (Operate within the absorbed energy.)
Cushion Air cushion (The rod side cushion does not function when adjusting the stroke direction.)
SSG Effective air cushion length mm 21.6 21.6 21.6 21.6 26.6 26.6
Adjustable stroke range mm 25,50,75,100
SSD Lubrication Required (use turbine oil class 1 ISO VG32 for lubrication)
Cushioned 63.5 91.5 116 152 233 362
CAT Allowable
0.371 0.386 0.386 0.958 1.08 2.32
absorbed Without
Without any cushion, this product cannot absorb large energy generated
MDC2 energy  J cushion
by an external load. We recommend using an external shock absorber.

MVC Stroke
Bore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm) Trunnion min. stroke (mm)
SMG ø125 25
MSD/ ø140 800 25
MSDG ø160 50/75/100/150/ 27
25
ø180 200/250/300 900 28 *1: ‌The custom stroke is
FC* ø200 1,000 28 available in 1 mm
increments.
ø250 1,200 28
STK *2: If the max. stroke is exceeded, product specifications may not be met, depending on operating conditions. Contact CKD in this case.

SRL3 Cylinder weight (Unit: kg)

Item/mounting Product weight when stroke (S) = 0 mm and stroke (S) adjustment = 25 mm Additional weight
SRG3 Bore size (mm) Basic (00) Axial foot (LB) Flange (FA/FB) Eye bracket (CA) Clevis bracket (CB) Trunnion (TA/TB/TC) Weight/25 mm stroke (S) adjustment per S = 100 mm
ø125 11.42 12.92 14.72 14.42 14.52 14.82 0.51 2.17
SRM3 ø140 13.35 15.35 18.75 17.15 17.35 16.55 0.51 2.41
ø160 18.45 21.55 25.35 23.45 23.75 24.85 0.72 3.21
SRT3 ø180 24.65 29.15 36.65 32.05 32.55 32.75 0.93 4.21
ø200 33.98 39.68 47.68 43.48 43.68 45.78 1.09 5.08
MRL2 ø250 57.81 66.21 83.71 81.81 76.31 86.51 1.53 7.60
Product weight for S = 0 mm stroke············· 12.92 kg
MRG2 300
Additional weight for S = 300 mm stroke············ 1.54 x 100 = 4.62 kg
(Example) Product weight of SCS2-P-LB-125B-300-25
Weight for 25 mm stroke adjustment············· 0.51 kg
SM‑25
Product weight········································ 12.92 + 4.62 + 0.51 = 18.05 kg

ShkAbs
Theoretical thrust table (Unit: N)
FJ Bore size Operating Working pressure MPa
(mm) direction 0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
FK ø125 Push/Pull 1.15x103 1.72x103 2.29x103 3.44x103 4.59x103 5.73x103 6.88x103 8.03x103 9.17x103 1.03x104 1.15x104
ø140 Push/Pull 1.46x103 2.19x103 2.92x103 4.38x103 5.84x103 7.29x103 8.75x103 1.02x104 1.17x104 1.31x104 1.46x104
Spd ø160 Push/Pull 1.88x103 2.83x103 3.77x103 5.65x103 7.54x103 9.42x103 1.13x104 1.32x104 1.51x104 1.70x104 1.88x104
Contr ø180 Push/Pull 2.39x103 3.58x103 4.77x103 7.16x103 9.54x103 1.19x104 1.43x104 1.67x104 1.91x104 2.15x104 2.39x104
ø200 Push/Pull 2.95x103 4.42x103 5.89x103 8.84x103 1.18x104 1.47x104 1.77x104 2.06x104 2.36x104 2.65x104 2.95x104
Ending ø250 Push/Pull 4.63x103 6.94x103 9.25x103 1.39x104 1.85x104 2.31x104 2.78x104 3.24x104 3.70x104 4.16x104 4.63x104

640
 SCS2-P Series
How to order
How to order SCP*3
No switch (without magnet for switch)
CMK2
SCS2-P LB 125 B 50 25 J Y
Code Description CMA2
A Mounting
A Mounting 00 Basic SCM
*1 LB Axial foot
FA Rod side flange SCG
FB Head side flange
TC Intermediate trunnion
TA Rod side trunnion
SCA2
TB Head side trunnion
SCS2
B Bore size (mm)
B Bore size 125 ø125
140 ø140 CKV2
160 ø160
CAV2/
180 ø180
COVP/N2
200 ø200
250 ø250 SSD2
C Port thread
C Port thread Blank Rc thread SSG
N NPT thread (made-to-order product)
G G thread (made-to-order product)
SSD
D Cushion
D Cushion B Both sides cushioned
CAT
R Rod side cushioned
H Head side cushioned
N Without cushion MDC2
E Stroke (mm)
Precautions for model No. selection E Stroke Bore size Stroke Custom stroke MVC
ø125 to ø160 25 to 800
*1: ‌Supporting hole is available custom made for ø125 to
ø180 25 to 900 In 1 mm SMG
160 only. Contact CKD for details about dimensions.
*2: T ‌ he instantaneous max. temperature is the temperature when ø200 25 to 1000 increments
sparks, cutting chips, etc., instantaneously contact the bellows. ø250 25 to 1200 MSD/
*3: C ‌ heck the figures below for the cushion needle position indication. MSDG
*4: "I" and "Y" cannot be selected together.
F Adjustable stroke range (mm)
F Adjustable stroke range 25 25 FC*
[Example of model No.] 50 50
75 75
SCS2-P-LB-125B-50-25-JY 100 100
STK
Model: Large bore size cylinder stroke adjustable
A Mounting : Axial foot
G Option SRL3
G Option C2 With cushion section check valve
B Bore size : ø125 mm *2 Max. ambient temp. Instantaneous ambient temp
C Port thread : Rc thread
J Bellows 100°C 200°C SRG3
D Cushion : With two-sided air cushion
E Stroke
L Bellows 250°C 400°C
: 50 mm
F Adjustable stroke range : 25 mm
M Piston rod material (stainless steel) SRM3
G Option
*3 Blank Cushion needle position (standard) Standard
: Bellows material for max. ambient temperature 100°C
H Accessory
R Cushion needle position R SRT3
: Rod clevis T R
S Cushion needle position S
T Cushion needle position T S
MRL2
P6 Copper and PTFE free (made-to-order product)
Cushion needle position H Accessory
H Accessory MRG2
(Needle position with the port on the top when viewed from the rod end) *4
I Rod eye
Y Rod clevis (pin and snap ring included)
Certified class 2 pressure vessel SM‑25
Port Standard stroke
Bore size Stroke ShkAbs
ø200 946 or more
T R
ø250 752 or more FJ

FK
S

Spd
Contr

Ending

641
 SCS2-P Series
SCP*3
Internal structure and parts list

CMK2
11 12
CMA2
For ‌ø200,
ø250
SCM
21 19 20 12 13 14 15 16 17 18 22 24 25 26

SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2
1 2 3 4 5 6 7 8 9 10 23

SSG

SSD Note: 14 , 19 , 20 and 21 are not required for the type without cushion.
No. Part name Material Remarks No. Part name Material Remarks
CAT 1 Hexagon nut Steel Zinc chromate 14 Cushion packing Nitrile rubber/steel
2 Bush Iron-copper oil-impregnated bearing alloy 15 Cylinder tube Aluminum alloy Hard alumite
MDC2 3 Rod cover Aluminum alloy casting Chromate 16 Piston packing Nitrile rubber
4 Tie rod Steel Zinc chromate 17 Wear ring Polyacetal resin
MVC 5 Piston rod A Steel Industrial chrome plating 18 Cushion ring B Steel Zinc chromate
6 Cushion ring A Steel Zinc chromate Copper alloy (ø125 to ø180)
SMG 19 Cushion needle
7 Piston gasket Nitrile rubber Steel (ø200, 250) Zinc chromate

MSD/ 8 Piston Aluminum alloy casting 20 Hexagon nut Steel Zinc chromate
MSDG 9 Head cover Aluminum alloy casting Chromate 21 Needle gasket Nitrile rubber
10 Hexagon nut Steel Zinc chromate 22 Hexagon socket head cap screw Steel Black finish
FC* 11 Dust wiper Nitrile rubber ø200 and ø250 only 23 Stopper ring Steel Zinc phosphate treatment
12 Rod packing Nitrile rubber 24 Piston rod B Steel Industrial chrome plating
STK
13 Cylinder gasket Nitrile rubber 25 Stopper Steel Zinc phosphate treatment
26 Hexagon nut Steel Zinc chromate
SRL3

SRG3

SRM3 Repair parts list

SRT3 Same as SCS2-D Series. Refer to page 652.

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

642
 SCS2-P Series
Dimensions
Dimensions SCP*3
Basic (00)
CMK2

CMA2
Cushion needle
XA + (2 x stroke) + a*
SCM
A WF LL + stroke PC + stroke + a*
K
V GA A View GA PA Stroke PB + a* PD
N 8-D C SCG
P QA 2-EE QA S T
T

øPF
SCA2

øMM
L

SCS2

øPE
øJ
N
K

T R CKV2
KK
CAV2/
Width across flats B 2-U COVP/N2
S
XB + (2 x stroke) + a*
SSD2

SSG

SSD

XA + L + (2 x stroke) + a* CAT
A WF +L
b MDC2
I
MVC

P F
F P
ød

Rod side Head side

SMG
I MSD/
MSDG
XB + L + (2 x stroke) + a*
FC*

[With bellows] STK

Port position diagram (A View)

SRL3

*1: , and indicate the cushion needle position. *: a: Adjustable stroke SRG3
Code
A B C D EE GA F I J K KK L LL MM P PA SRM3
Bore size (mm)
ø125 50 46 47 M14x1.5 Rc1/2 30.5 20 16 57 140 M30x1.5 78 to 82 92 32 13 31
ø140 50 46 47 M14x1.5 Rc3/4 34.5 20 20 57 157 M30x1.5 86.5 to 91 103 32 15 31 SRT3
ø160 56 55 53 M16x1.5 Rc3/4 34.5 24 20 62 177 M36x1.5 96.5 to 101 106 40 15 34
ø180 63 60 60 M18x1.5 Rc3/4 34.5 24 20 68 200 M40x1.5 108 to 112 110 45 15 34 MRL2
ø200 72 70 69 M20x1.5 Rc3/4 37.5 24 20.5 75 220 M45x1.5 120.5 to 129 123 50 20 57
ø250 88 85 84 M24x1.5 Rc1 42.5 24 20.5 93 274 M56x2 147.5 to 156 141 60 22 60 MRG2
Code With bellows
PB PC PD PE PF QA S T U V WF XA XB SM‑25
Bore size (mm) b d L
ø125 40.5 92.5 21 88 90 15 12 18 ø10 depth 10 45.5 65 299.5 249.5 74 75 (Stroke/4.55) + 11
ø140 40.5 92.5 21 88 90 17 12 18 ø10 depth 10 45.5 67 312.5 262.5 74 75 (Stroke/4.55) + 9
ShkAbs
ø160 46 106 26 98 104 17 14.5 21 ø14 depth 15 48 71 339 283 82 80 (Stroke/5.15) + 9
ø180 52 115 29 108 110 17 16 24 ø14 depth 15 53 78 366 303 91 90 (Stroke/5.15) + 9
FJ
ø200 48 137 32 120 128 18 18 27 ø14 depth 15 60 88 420 348 102 95 (Stroke/5.30) + 9
FK
ø250 58 157 39 141 150 21 22.5 34 ø14 depth 15 64 94 480 392 120 120 (Stroke/6.40) + 9
Spd
* ‌Dimensions of other mounting are the same as those of the double acting SCS2 Series.Refer Contr
to pages 631 to 638.
Ending
* For the dimensions of the accessories, refer to page 639.
643
 Large bore size cylinder
Double acting/heat resistant

SCP*3
SCS2-T Series
Bore size: ø125/ø140/ø160/ø180/ø200/ø250
CMK2
JIS symbol
CMA2

SCM
Specifications
SCG Item SCS2-T (heat resistant)
Bore size mm ø125 ø140 ø160 ø180 ø200 ø250
SCA2 Actuation Double acting
Working fluid Compressed air
SCS2 Max. working pressure MPa 1.0 (≈150 psi, 10 bar)
Min. working pressureMPa 0.05 (≈7.3 psi, 0.5 bar)
Proof pressure MPa 1.6 (≈230 psi, 16 bar)
CKV2 Ambient temperature °C 5 (41°F) to 120 (248°F) (*1) *1: ‌The ambient temperature for the following
CAV2/ Port size Rc1/2 Rc3/4 Rc1 products is 5 to 100°C.
+1.0 +1.4 +1.8
COVP/N2 Stroke tolerance mm 0 ( to 300), 0 ( to 1000), 0 ( to 1200) Bore size Stroke
Working piston speed mm/s 20 to 1000 (Operate within the absorbed energy.) ø200 946 or more
SSD2 Cushion Air cushion ø250 752 or more
Effective air cushion length mm 21.6 21.6 21.6 21.6 26.6 26.6
Consult CKD for use at ambient temperature 5
SSG Lubrication Unavailable (*2) to 120°C.
Allowable Cushioned 63.5 91.5 116 152 233 362
*2: ‌Periodically apply additional heat-resistant
0.371 0.386 0.386 0.958 1.08 2.32
SSD absorbed Without grease.
Without any cushion, this product cannot absorb large energy generated by an external load. *3: ‌Consult with CKD if localized heating is
energy  J cushion We recommend using an external shock absorber. occurring.
CAT
Stroke
MDC2 Bore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm) Trunnion, min. stroke (mm)
ø125 23
MVC ø140 800 25
ø160 50/75/100/150/ 27
1
SMG ø180 200/250/300 900 28
*3: T
‌ he custom stroke is
ø200 1000 28 available in 1 mm
MSD/ ø250 1200 28 increments.
MSDG *4: If the max. stroke is exceeded, product specifications may not be met, depending on operating conditions. Contact CKD in this case.

FC* Cylinder weight (Unit: kg)

Item/mounting Product weight when stroke (S) = 0 mm Additional
STK Basic Axial foot Flange Eye bracket Clevis bracket Trunnion weight per
Bore size (mm)
(00) (LB) (FA/FB) (CA) (CB) (TA/TB/TC) S = 100 mm
SRL3 ø125 7.22 8.72 10.52 10.22 10.32 10.62 1.54
ø140 9.35 11.35 14.75 13.15 13.35 12.55 1.78
SRG3 ø160 12.35 15.45 19.25 17.35 17.65 18.75 2.22
ø180 16.75 21.25 28.75 24.15 24.65 24.85 2.96
ø200 22.78 28.48 36.48 32.28 32.48 34.58 3.54
SRM3
ø250 40.51 48.91 66.41 64.51 59.01 69.21 5.38

SRT3 Product weight for S = 0 mm stroke············· 8.72 kg

300
(Example) Product weight of SCS2-T-LB-125B-300 Additional weight for S = 300 mm stroke············· 1.54 x 100 = 4.62 kg
MRL2 Product weight········································ 8.72 + 4.62 = 13.34 kg

MRG2 Theoretical thrust table (Unit: N)

Bore size Operating Working pressure MPa
SM‑25 (mm) direction 0.05 0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
Push 6.14x102 1.23x103 1.84x103 2.45x103 3.68x103 4.91x103 6.14x103 7.36x103 8.59x103 9.82x103 1.10x104 1.23x104
ø125
ShkAbs Pull 5.73x102 1.15x103 1.72x103 2.29x103 3.44x103 4.59x103 5.73x103 6.88x103 8.03x103 9.17x103 1.03x104 1.15x104
Push 7.70x102 1.54x103 2.31x103 3.08x103 4.62x103 6.16x103 7.70x103 9.24x103 1.08x104 1.23x104 1.39x104 1.54x104
ø140
Pull 7.29x102 1.46x103 2.19x103 2.92x103 4.38x103 5.84x103 7.29x103 8.75x103 1.02x104 1.17x104 1.31x104 1.46x104
FJ
Push 1.01x103 2.01x103 3.02x103 4.02x103 6.03x103 8.04x103 1.01x104 1.21x104 1.41x104 1.61x104 1.81x104 2.01x104
ø160
Pull 9.42x102 1.88x103 2.83x103 3.77x103 5.65x103 7.54x103 9.42x103 1.13x104 1.32x104 1.51x104 1.70x104 1.88x104
FK Push 1.27x103 2.54x103 3.82x103 5.09x103 7.63x103 1.02x104 1.27x104 1.53x104 1.78x104 2.04x104 2.29x104 2.54x104
ø180
Pull 1.19x103 2.39x103 3.58x103 4.77x103 7.16x103 9.54x103 1.19x104 1.43x104 1.67x104 1.91x104 2.15x104 2.39x104
Spd
Push 1.57x103 3.14x103 4.71x103 6.28x103 9.42x103 1.26x104 1.57x104 1.88x104 2.20x104 2.51x104 2.83x104 3.14x104
Contr ø200
Pull 1.47x103 2.95x103 4.42x103 5.89x103 8.84x103 1.18x104 1.47x104 1.77x104 2.06x104 2.36x104 2.65x104 2.95x104
Push 2.45x103 4.91x103 7.36x103 9.82x103 1.47x104 1.96x104 2.45x104 2.95x104 3.44x104 3.93x104 4.42x104 4.91x104
Ending ø250
Pull 2.31x103 4.63x103 6.94x103 9.25x103 1.39x104 1.85x104 2.31x104 2.78x104 3.24x104 3.70x104 4.16x104 4.63x104

644
 SCS2-T Series
How to order
How to order SCP*3
SCS2-T LB 125 B 50 M Y
Code Description CMK2
A Mounting
A Mounting 00 Basic CMA2
*1 LB Axial foot
FA Rod side flange SCM
FB Head side flange
CA Eye bracket
SCG
CB Clevis bracket (pin and snap ring included)
TC Intermediate trunnion
TA Rod side trunnion
SCA2
TB Head side trunnion
SCS2
B Bore size (mm)
B Bore size 125 ø125
140 ø140
CKV2
160 ø160 CAV2/
180 ø180 COVP/N2
200 ø200
250 ø250 SSD2
C Port thread
C Port thread Blank Rc thread SSG
N NPT thread (made-to-order product)
G G thread (made-to-order product) SSD
D Cushion
D Cushion B Both sides cushioned CAT
R Rod side cushioned
H Head side cushioned MDC2
N Without cushion
E Stroke (mm) MVC
Precautions for model No. selection E Stroke Bore size Stroke Custom stroke
*1: S ‌ upporting hole is available custom made for ø125 to ø125 to ø160 1 to 800 SMG
160 only. Contact CKD for details about dimensions. ø180 1 to 900 In 1 mm
*2: T‌ he instantaneous max. temperature is the temperature when MSD/
ø200 1 to 1000 increments
sparks, cutting chips, etc., instantaneously contact the bellows. MSDG
*3: ‌Check the figures below for the cushion needle ø250 1 to 1200
position indication. F Option FC*
*4: "I" and "Y" cannot be selected together. F Option
C2 With cushion section check valve
*2
L Bellows Max. ambient temp. 250°C Instantaneous max. temp 400°C STK
[Example of model No.] M Piston rod material (stainless steel)
SCS2-T-LB-125 B-50-MY *3 Blank Cushion needle position (standard) Standard SRL3
Model: Large bore size cylinder, double acting/heat resistant R Cushion needle position R
T R
Mounting : Axial foot S Cushion needle position S SRG3
T Cushion needle position T S
B Bore size : ø125 mm
C Port thread : Rc thread G Accessory SRM3
D Cushion : Both sides cushioned G Accessory
I Rod eye
E Stroke
*4
: 50 mm Y Rod clevis (pin and snap ring included) SRT3
F Option : Piston rod material change (stainless steel) B1 Eye bracket
G Accessory : Rod clevis B2 Clevis bracket (pin and snap ring included) MRL2

Cushion needle position MRG2

(Needle position with the port on the top when viewed from the rod end)
SM‑25
Port
Standard
Certified class 2 pressure
vessel stroke ShkAbs
Bore size Stroke
ø160 1948 or more FJ
ø180 1526 or more
T R ø200 946 or more FK
ø250 752 or more Spd
Contr

Ending
S
645
 SCS2-T Series
SCP*3
Internal structure and parts list

CMK2 12
11

CMA2

SCM 21 19 20 For ‌ø200, 12 13 14 15 16 17

ø250
SCG

SCA2
18
SCS2

CKV2
CAV2/
COVP/N2

SSD2

SSG 1 2 3 4 5 6 7 8 9 10

SSD

CAT
Note: 14 , 19 , 20 and 21 are not required for the type without cushion.
No. Part name Material Remarks No. Part name Material Remarks
MDC2
1 Hexagon nut Steel Zinc chromate 13 Cylinder gasket Fluoro rubber
2 Bush Iron/copper oil-impreg bearing 14 Cushion packing Fluoro rubber/steel
MVC
3 Rod cover Aluminum alloy casting Chromate 15 Cylinder tube Aluminum alloy Hard alumite
4 Tie rod Steel Zinc chromate 16 Piston packing Fluoro rubber
SMG
5 Piston rod Steel Industrial chrome plating 17 Wear ring Fiber-reinforced phenolic resin
MSD/ 6 Cushion ring A Steel Zinc chromate 18 Cushion ring B Steel Zinc chromate
MSDG 7 Piston gasket Fluoro rubber Copper alloy (ø125 to ø180)
19 Cushion needle
8 Piston Aluminum alloy casting Steel (ø200, 250) Zinc chromate
FC*
9 Head cover Aluminum alloy casting Chromate 20 Hexagon nut Steel Zinc chromate
10 Hexagon nut Steel Zinc chromate 21 Needle gasket Fluoro rubber
STK
11 Dust wiper Fluoro rubber ø200 and ø250 only
12 Rod packing Fluoro rubber
SRL3

SRG3
Repair parts list
Bore size (mm) Kit No. Repair parts No.
SRM3
ø125 SCS2-T-125K
ø140 SCS2-T-140K
SRT3 12 13 14 16 17 21
ø160 SCS2-T-160K
ø180 SCS2-T-180K
MRL2
ø200 SCS2-T-200K
11 12 13 14 16 17 21
ø250 SCS2-T-250K
MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

646
 SCS2-T Series
Dimensions
Dimensions SCP*3
Basic (00)
MN CMK2

CMA2

MO
(Width across flats)

SCM
X + stroke
SCG
A WF LL + stroke (M)
V GA A View
K QA GB SCA2
N C QB
8-D
P T U 2-EE SCS2

CKV2

øMM
L

CAV2/
COVP/N2

øJ
K
N

T R
SSD2
KK
Width across flats B SSG
S

SSD

X + L + stroke CAT
A WF +L
b MDC2

MVC
ød

F P

F P
Rod side Head side
SMG
I I MSD/
MSDG

FC*
[With bellows]

STK
Port position diagram (A View)

SRL3

SRG3
*1: , and indicate the cushion needle position.
*2: L dimensions below decimal point are rounded up.
Code Basic (00) Basic dimensions
SRM3
Bore size (mm) A B C D EE GA GB F I J K KK L LL M MM MN
ø125 50 46 47 M14x1.5 Rc1/2 30.5 30.5 20 16 57 140 M30x1.5 78 to 82 92 13.5 32 15
SRT3
ø140 50 46 47 M14x1.5 Rc3/4 34.5 34.5 20 20 57 157 M30x1.5 86.5 to 91 103 13.5 32 15
MRL2
ø160 56 55 53 M16x1.5 Rc3/4 34.5 34.5 24 20 62 177 M36x1.5 96.5 to 101 106 15.5 40 15
ø180 63 60 60 M18x1.5 Rc3/4 34.5 34.5 24 20 68 200 M40x1.5 108 to 112 110 17.5 45 17
MRG2
ø200 72 70 69 M20x1.5 Rc3/4 37.5 37.5 24 20.5 75 220 M45x1.5 120.5 to 129 123 18.5 50 20
ø250 88 85 84 M24x1.5 Rc1 42.5 42.5 24 20.5 93 274 M56x2 147.5 to 156 141 21.5 60 22
SM‑25
Code With bellows
Bore size (mm) MO N P QA QB T U V WF X b d L
ShkAbs
ø125 27 110 13 15 15 18 19 45.5 65 220.5 74 75 (Stroke/4.55) + 11
ø140 27 124 15 17 17 18 19 45.5 67 233.5 74 75 (Stroke/4.55) + 9
FJ
ø160 36 142 15 17 17 21 19 48 71 248.5 82 80 (Stroke/5.15) + 9
ø180 41 160 15 17 17 24 19 53 78 268.5 91 90 (Stroke/5.15) + 9
FK
ø200 46 175 20 18 18 27 24 60 88 301.5 102 95 (Stroke/5.30) + 9
ø250 55 216 22 21 21 34 24 64 94 344.5 120 120 (Stroke/6.40) + 9 Spd
Contr
* Dimensions of other mounting are the same as those of the double acting SCS2 Series. Refer to pages 631 to 638.
Ending
* For the dimensions of the accessories, refer to page 639.
647
 Large bore size cylinder
Double acting/double rod/lubrication/no-lubrication

SCP*3
SCS2-D Series
Bore size: ø125/ø140/ø160/ø180/ø200/ø250
CMK2
JIS symbol
CMA2

SCM * Made-to-order product.

Specifications
SCG Item SCS2-D/SCS2-LND (double rod)
Bore size mm ø125 ø140 ø160 ø180 ø200 ø250
SCA2 Actuation Double acting
Working fluid Compressed air
SCS2 Max. working pressure MPa 1.0 (≈150 psi, 10 bar)
Min. working pressureMPa 0.1 (≈15 psi, 1 bar)
CKV2 Proof pressure MPa 1.6 (≈230 psi, 16 bar)
Ambient temperature °C -5 (23°F) to 60 (140°F) (no freezing)
CAV2/
Port size Rc1/2 Rc3/4 Rc1
COVP/N2 +1.0 +1.4 +1.8
Stroke tolerance mm 0 ( to 300), 0 ( to 1000), 0 ( to 1200)
SSD2 Working piston speed mm/s 20 to 1000 (Operate within the absorbed energy.)
Cushion Air cushion
SSG Effective air cushion length mm 21.6 21.6 21.6 21.6 26.6 26.6
Lubrication SCS-D: Required (use turbine oil class 1 ISO VG32 for lubrication)/Not required for SCS-LND
SSD Cushioned 63.5 91.5 116 152 233 362
Allowable
0.371 0.386 0.386 0.958 1.08 2.32
absorbed Without
CAT Without any cushion, this product cannot absorb large energy generated
energy  J cushion
by an external load. We recommend using an external shock absorber.
MDC2

MVC

SMG
Stroke
Bore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm) Trunnion min. stroke (mm)
MSD/ ø125 23
MSDG ø140 800 25
ø160 50/75/100/150/ 27
FC* 1
ø180 200/250/300 900 28
STK ø200 1,000 28
ø250 1,200 28
SRL3 *1: The custom stroke is available in 1 mm increments.
*2: If the max. stroke is exceeded, product specifications may not be met, depending on operating conditions. Contact CKD in this case.

SRG3

SRM3
Min. stroke with switch
SRT3 Item Stroke when mounted Stroke of intermediate Stroke of rod side Stroke of head side
Bore size (mm) on the same surface supporting hole trunnion supporting hole trunnion supporting hole trunnion
MRL2 Sketch Port Port Port Port

MRG2 Switch

Bore size Position cannot be detected Position cannot be detected

SM‑25 at the rod side stroke end. at the head side stroke end.

ø125 120 or more 70 or more

ShkAbs ø140 125 or more 75 or more
ø160 130 or more 80 or more
Reed switch (T*) 20 or more
FJ ø180 135 or more 85 or more
ø200 140 or more 90 or more
FK ø250 150 or more 100 or more

Spd
Contr

Ending

648
 SCS2-D Series
Specifications
Switch specifications SCP*3
1-color/2-color LED/for AC magnetic field proof
2-wire proximity 3-wire proximity 2-wire reed 2-wire proximity CMK2
Item T1H/ T2H/T2V/ T2YH/ T2WH/ T3H/ T3PH/ T3YH/ T3WH/ T2YD (*4)
T0H/T0V T5H/T5V T8H/T8V
T1V T2JH/T2JV T2YV T2WV T3V T3PV T3YV T3WV T2YDT CMA2
For programmable Dedicated for For programmable For programmable For programmable controller, For programmable For
Applications controller, relay, relay, IC circuit (no indicator programmable
compact solenoid valve programmable controller controller, relay controller, relay lamp), serial connection controller, relay controller SCM
Output method - NPN output PNP output NPN output NPN output -
Pwr. supp. V. - 10 to 28 VDC - SCG
Load voltage 85 to 265 VAC 10 to 30 VDC 24 VDC ±10% 30 VDC or less 12/24 VDC 110 VAC 5/12/24 VDC 110 VAC 12/24 VDC 110 VAC 220 VAC 24 VDC ±10%
Load current 5 to 100 mA 5 to 20 mA (*3) 100 mA or less 50 mA or less 5 to 50 mA 7 to 20 mA 50 mA or less 20 mA or less 5 to 50 mA 7 to 20 mA 7 to 10 mA 5 to 20 mA
SCA2
Red/green Red/green Yellow Red/green Red/green Red/green
LED LED LED LED No indicator LED
Indicator LED LED LED LED LED LED
(Lit when ON) (Lit when ON) (Lit when ON) (Lit when ON) lamp (Lit when ON) SCS2
(Lit when ON) (Lit when ON) (Lit when ON) (Lit when ON) (Lit when ON) (Lit when ON)
≤ 1 mA at 100 VAC,
Leakage current 1 mA or less 10 μA or less 0 mA 1 mA or less
≤ 2 mA at 200 VAC CKV2
1 m:33 1 m:18 1 m:33 1 m:18 1 m:18 1 m:33 1 m:18 1 m:33 1 m:61
CAV2/
Weightg 3 m:87 3 m:49 3 m:87 3 m:49 3 m:49 3 m:87 3 m:49 1 m:18 3 m:49 5 m:80 3 m:87 3 m:166
COVP/N2
5 m:142 5 m:80 5 m:142 5 m:80 5 m:80 5 m:142 5 m:80 5 m:142 5 m:272
*1 : Refer to Ending Page 1 for detailed switch specifications and dimensions. SSD2
*2 : Switches other than the above models, such as switches with connectors, are also available. Refer to Ending Page 1.
*3 : Max. load current: 20 mA at 25°C. The current is lower than 20 mA if the operating ambient temperature around the switch is higher than 25˚C. SSG
(5 to 10 mA at 60°C)
*4 : Switch for AC magnetic field (T2YD/T2YDT) cannot be used in DC magnetic field.
SSD

CAT
Cylinder weight (Unit: kg)
Item/mounting Product weight when stroke (S) = 0 mm Switch weight Additional MDC2
Basic Axial foot Flange Eye bracket Clevis bracket Trunnion weight per
Bore size (mm) Switch Mounting bracket S = 100 mm
(00) (LB) (FA/FB) (CA) (CB) (TA/TB/TC) MVC
ø125 9.02 10.52 12.32 12.02 12.12 12.42 0.028 2.17
Refer to
ø140 10.95 12.95 16.35 14.75 14.95 14.15 0.030 2.41 SMG
the weight
ø160 15.05 18.15 21.95 20.05 20.35 21.45 0.034 3.21
in the switch MSD/
ø180 20.15 24.65 32.15 27.55 28.05 28.25 0.038 4.21
specifications. MSDG
ø200 27.68 33.38 41.38 37.18 37.38 39.48 0.040 5.08
ø250 48.51 56.91 74.41 72.51 67.01 77.21 0.045 7.60 FC*
Product weight for S = 0 mm stroke···········10.52 kg
Additional weight for S = 300 mm stroke···········2.17 x 300
100
= 6.51 kg STK
(Example) Product weight of SCS2-LND-LB-125B-300-TOH-D Weight of 2 switches (T0H-D)··········0.018 x 2 = 0.036 kg
Product weight with 2 switch brackets·····0.028 x 2 = 0.056 kg
SRL3
Product weight·····························10.52 + 6.51 + 0.036 + 0.056 = 17.122 kg

SRG3

SRM3
Theoretical thrust table (Unit: N)
Bore size Operating Working pressure MPa SRT3
(mm) direction 0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
ø125 Push/Pull 1.15x103 1.72x103 2.29x103 3.44x103 4.59x103 5.73x103 6.88x103 8.03x103 9.17x103 1.03x104 1.15x104 MRL2
ø140 Push/Pull 1.46x103 2.19x103 2.92x103 4.38x103 5.84x103 7.29x103 8.75x103 1.02x104 1.17x104 1.31x104 1.46x104
ø160 Push/Pull 1.88x103 2.83x103 3.77x103 5.65x103 7.54x103 9.42x103 1.13x104 1.32x104 1.51x104 1.70x104 1.88x104 MRG2
ø180 Push/Pull 2.39x103 3.58x103 4.77x103 7.16x103 9.54x103 1.19x104 1.43x104 1.67x104 1.91x104 2.15x104 2.39x104
ø200 Push/Pull 2.95x103 4.42x103 5.89x103 8.84x103 1.18x104 1.47x104 1.77x104 2.06x104 2.36x104 2.65x104 2.95x104 SM‑25
ø250 Push/Pull 4.63x103 6.94x103 9.25x103 1.39x104 1.85x104 2.31x104 2.78x104 3.24x104 3.70x104 4.16x104 4.63x104
ShkAbs

FJ

FK
Spd
Contr

Ending

649
 SCS2-D Series
SCP*3
How to order
No switch (lubrication) (without magnet for switch)
Code Description
CMK2 SCS2-D LB 125 B 50 J I A Mounting
00 Basic
CMA2 With switch (no-lubrication) (built-in magnet for switch) LB Axial foot
SCS2-LND LB 125 B 50 T0H R J I FA Rod side flange
FB Head side flange
SCM TC Intermediate trunnion
TA Rod side trunnion
A Mounting TB Head side trunnion
SCG *1
B Bore size (mm)
B Bore size 125 ø125
SCA2 140 ø140
160 ø160
SCS2 180 ø180
200 ø200
250 ø250
CKV2 C Port thread
C Port thread Blank RC thread
CAV2/ N NPT thread (made-to-order product)
COVP/N2 G G thread (made-to-order product)

SSD2 D Cushion
D Cushion B Both sides cushioned
R Rod side cushioned
SSG H Head side cushioned
N Without cushion

SSD E Stroke (mm)

E Stroke *2
Bore size Stroke *2 Custom stroke
ø125 to ø160 1 to 800
CAT ø180 1 to 900 In 1 mm
ø200 1 to 1000 increments
ø250 1 to 1200
MDC2
F Switch model No.
F Switch model No.

Reed Contact
Axial Radial lead Voltage Lead
MVC Indicator
lead wire wire AC DC Line
T0H* T0V* 1-color LED
SMG T5H* T5V* No indicator lamp 2-wire
T8H* T8V* 1-color LED
MSD/ T1H* T1V*
2-wire
MSDG T2H* T2V* 1-color LED
Precautions for model No. selection T3H* T3V*
3-wire
FC* *1 : ‌Supporting hole is available custom made for ø125 to 160 only. T3PH* T3PV* 1-color LED (PNP output)
Proximity

Contact CKD for details about dimensions. T2WH* T2WV*

*2 : Refer to page 648 for the min. stroke with switch. 2-wire
STK T2YH* T2YV*
*3 : ‌When selecting TA or TB as mounting, the number of switches is 2-color LED
T3WH* T3WV*
limited to "H" (1 on head side) for TA and TD, and "R" (1 on rod 3-wire
side) for TB. T3YH* T3YV*
SRL3
*4 : ‌The instantaneous max. temperature is the temperature when T2YD* - 2-color LED
2-wire
sparks, cutting chips, etc., instantaneously contact the bellows. T2YDT* - AC magnetic field
SRG3 *5 : Refer to page 651 for the cushion needle position indication. T2JH* T2JV* 1-color LED off-delay 2-wire
* Lead wire length
SRM3 Blank 1 m (standard)
3 3 m (option)
[Example of model No.] 5 5 m (option)
SRT3 Switch quantity
SCS2-LND-LB-125B-50-T0H-R-JY G Switch quantity
G
R 1 on rod side
Model: Large bore size cylinder double acting/double rod, with switch *3 H 1 on head side
MRL2
A Mounting :·Axial foot D 2
B Bore size :·ø125 mm T 3
MRG2 C Port thread :·Rc thread 4 4
D Cushion :·Both sides cushioned H Option
H Option C2
With cushion section check valve
SM‑25 E Stroke :·50 mm
*4 Max. ambient temp. Instantaneous ambient temp
F Switch model No.·:·Reed T0H switch, lead wire 1 m
J Bellows 100°C 200°C
ShkAbs G Switch quantity :·1 on rod side
L Bellows 250°C 400°C
H Option :·Bellows material for max. ambient temperature 100°C M Piston rod material (stainless steel)
I Accessory :·Rod clevis *5 Blank Cushion needle position (standard) Standard
FJ
R Cushion needle position R
T R
S Cushion needle position S
FK T Cushion needle position T S
P6 Copper and PTFE free (made to order)
Spd I Accessory
Contr I Accessory I Rod eye
Y Rod clevis (pin and snap ring included)
Ending

650
 SCS2-D Series
How to order
How to order switch SCP*3
Switch body + mounting bracket set Switch body only Mounting bracket set

SCS2-LN T0H 125 SW T0H SCS2-LN TS 125 CMK2

CMA2
Bore size (Item B Switch model No. Bore size (Item B
on page 650) (Item F on page 650) on page 650) SCM

Switch model No. Mounting bracket

SCG
(Item F on page 650) TS T-switch
T T2YD switch
SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2

SSG

Cushion needle position (needle position from rod direction with the port on the top side) SSD

CAT

MDC2
Port
Standard Certified class 2 pressure
vessel stroke MVC
Bore size Stroke
ø200 946 or more SMG
ø250 752 or more
MSD/
MSDG

T R FC*

STK

SRL3

SRG3
S
SRM3

SRT3

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

651
 SCS2-D Series
SCP*3
Internal structure and parts list

CMK2
11 12

CMA2

SCM 21 19 20 12 13 14 15 16 17 18 22 23
For ‌ø200,
ø250
SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2

SSD2
1 2 3 4 5 6 7 8 9 10

SSG

SSD

CAT Note: 14 , 19 , 20 and 21 are not required for the type without cushion.
No. Part name Material Remarks No. Part name Material Remarks
MDC2
1 Hexagon nut Steel Zinc chromate 13 Cylinder gasket Nitrile rubber
2 Bush Iron-copper oil-impregnated bearing alloy 14 Cushion packing Nitrile rubber/steel
MVC
3 Rod cover Aluminum alloy casting Chromate 15 Cylinder tube Aluminum alloy Hard alumite
4 Tie rod Steel Zinc chromate 16 Piston packing Nitrile rubber
SMG
5 Piston rod A Steel Industrial chrome plating 17 Wear ring Polyacetal resin
MSD/ 6 Cushion ring A Steel Zinc chromate 18 Cushion ring B Steel Zinc chromate
MSDG 7 Piston gasket Nitrile rubber Copper alloy (ø125 to ø180)
19 Cushion needle
8 Piston Aluminum alloy casting Steel (ø200, 250) Zinc chromate
FC*
9 Head cover Aluminum alloy casting Chromate 20 Hexagon nut Steel Zinc chromate
10 Hexagon nut Steel Zinc chromate 21 Needle gasket Nitrile rubber
STK
11 Dust wiper Nitrile rubber ø200 and ø250 only 22 Piston rod B Steel Industrial chrome plating
12 Rod packing Nitrile rubber 23 Hexagon nut Steel Zinc chromate
SRL3

SRG3
Repair parts list
Bore size (mm) Kit No. Repair parts No.
SRM3
ø125 SCS2-D-125K
ø140 SCS2-D-140K
SRT3 12 13 14 16 17 21
ø160 SCS2-D-160K
ø180 SCS2-D-180K
MRL2
ø200 SCS2-D-200K
11 12 13 14 16 17 21
ø250 SCS2-D-250K
MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

652
 SCS2-D Series
Double acting/double rod/lubrication / no-lubrication
Dimensions SCP*3
Basic ( 00)
CMK2

CMA2
SD + (2 x stroke)
Cushion needle
SCM
A WF LL+ Stroke WF + stroke A
K
C V GA GA C
N 8-D
A view
SCG
P QA 2-EE QA V
T T SCA2

øMM
øMM
L

SCS2
N
K

øJ
T R CKV2
KK
KK CAV2/
Width across flats B COVP/N2
S
SSD2
SA+ (2 ×Stroke)

SSG

SSD

CAT
SD + (2 x ℓ) + (2 x stroke)
A WF + ℓ
b
MDC2
I
MVC

P F
F P

Rod side Head side

ød

SMG
I MSD/
MSDG
SA + (2 x ℓ) + (2 x stroke) FC*

[With bellows] Port position diagram (A view) STK

SRL3

*1: , and indicate the cushion needle position. SRG3

*2: The positions for the left and right widths across flats are unspecified.
Code Basic (00) Basic dimensions
SRM3
Bore size(mm) A B C D EE GA F I J K KK L LL
ø125 50 46 47 M 14 x 1.5 Rc1/2 30.5 20 16 57 140 M 30 x 1.5 78 to 82 92
SRT3
ø140 50 46 47 M 14 x 1.5 Rc3/4 34.5 20 20 57 157 M 30 x 1.5 86.5 to 91 103
ø160 56 55 53 M 16 x 1.5 Rc3/4 34.5 24 20 62 177 M 36 x 1.5 96.5 to 101 106
MRL2
ø180 63 60 60 M 18 x 1.5 Rc3/4 34.5 24 20 68 200 M 40 x 1.5 108 to 112 110
ø200 72 70 69 M 20 x 1.5 Rc3/4 37.5 24 20.5 75 220 M 45 x 1.5 120.5 to 129 123
MRG2
ø250 88 85 84 M 24 x 1.5 Rc1 42.5 24 20.5 93 274 M 56 x 2 147.5 to 156 141
Code With bellows SM‑25
Bore size(mm) MM N P QA SA SD T V WF b d ℓ
ø125 32 110 13 15 222 322 18 45.5 65 74 75 (stroke/4.55) + 11 ShkAbs
ø140 32 124 15 17 237 337 18 45.5 67 74 75 (stroke/4.55) + 9
ø160 40 142 15 17 248 360 21 48 71 82 80 (stroke/5.15) + 9 FJ
ø180 45 160 15 17 266 392 24 53 78 91 90 (stroke/5.15) + 9
ø200 50 175 20 18 299 443 27 60 88 102 95 (stroke/5.30) + 9 FK
ø250 60 216 22 21 329 505 34 64 94 120 120 (stroke/6.40) + 9
Spd
Contr
* Dimensions of other mounting are the same as those of the double acting SCS2 Series. Refer to pages 631 to 638.
Ending
* For the dimensions of the accessories, refer to page 639.
653
 Large bore size cylinder
Double acting/back to back

SCP*3
SCS2-B Series
Bore size: ø125/ø140/ø160/ø180/ø200/ø250
CMK2
JIS symbol
CMA2

SCM * Made-to-order product.

Specifications
SCG Item SCS2-B (back to back)
Bore size mm ø125 ø140 ø160 ø180 ø200 ø250
SCA2 Actuation Double acting
Working fluid Compressed air
Max. working pressure MPa 1.0 (≈150 psi, 10 bar)
SCS2 Min. working pressure MPa 0.05 (≈7.3 psi, 0.5 bar)
Proof pressure MPa 1.6 (≈230 psi, 16 bar)
CKV2 Ambient temperature °C -5 (23°F) to 60 (140°F) (no freezing)
Port size Rc1/2 Rc3/4 Rc1
CAV2/ Stroke tolerance mm +1.0
0 ( to 300), +1.4
0 ( to 1000), +1.8
0 ( to 1200)
COVP/N2 Working piston speed mm/s 20 to 1000 (Operate within the absorbed energy.)
Cushion Air cushion
SSD2 Effective air cushion length mm 21.6 21.6 21.6 21.6 26.6 26.6
Lubrication Required (use turbine oil class 1 ISO VG32 for lubrication)
SSG Cushioned 63.5 91.5 116 152 233 362
Allowable
0.371 0.386 0.386 0.958 1.08 2.32
absorbed Without
SSD energy  J cushion
Without any cushion, this product cannot absorb large energy generated
by an external load. We recommend using an external shock absorber.

CAT
Stroke
MDC2 Bore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm) Trunnion, min. stroke (mm)
ø125 23
ø140 800 25
MVC ø160 50/75/100/150/ 27
1
ø180 200/250/300 900 28
SMG ø200 1,000 28
ø250 1,200 28
MSD/
MSDG *1: The custom stroke is available in 1 mm increments.

FC* Cylinder weight (Unit: kg)

Item/mounting Product weight when stroke (S) = 0 mm Additional
STK
Basic Axial foot Flange Eye bracket Clevis bracket Trunnion weight per
Bore size (mm) (00) (LB) (FA/FB) (CA) (CB) (TA/TB/TC) S = 100 mm
SRL3 ø125 14.44 15.94 17.74 17.44 17.54 17.84 1.54
ø140 18.70 20.70 24.10 22.50 22.70 21.90 1.78
SRG3 ø160 24.70 27.80 31.60 29.70 30.00 31.10 2.22
ø180 33.50 38.00 45.50 40.90 41.40 41.60 2.96
ø200 45.56 51.26 59.26 55.06 55.26 57.36 3.54
SRM3
ø250 81.02 89.42 106.92 105.02 99.52 109.72 5.38

SRT3 Product weight for S = 0 mm stroke············· 15.94 kg

300
(Example) Product weight of SCS2-B-LB-125B-300-300 Additional weight for S = 300 mm stroke·············· 2 x 1.54 x 100 = 9.24 kg
MRL2 Product weight······························· 15.94 + 9.24 = 25.18 kg

MRG2
Theoretical thrust table (Unit: N)
Bore size Operating Working pressure MPa
SM‑25 (mm) direction 0.05 0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
Push 6.14x102 1.23x103 1.84x103 2.45x103 3.68x103 4.91x103 6.14x103 7.36x103 8.59x103 9.82x103 1.10x104 1.23x104
ø125
ShkAbs Pull 5.73x102 1.15x103 1.72x103 2.29x103 3.44x103 4.59x103 5.73x103 6.88x103 8.03x103 9.17x103 1.03x104 1.15x104
Push 7.70x102 1.54x103 2.31x103 3.08x103 4.62x103 6.16x103 7.70x103 9.24x103 1.08x104 1.23x104 1.39x104 1.54x104
ø140
FJ Pull 7.29x102 1.46x103 2.19x103 2.92x103 4.38x103 5.84x103 7.29x103 8.75x103 1.02x104 1.17x104 1.31x104 1.46x104
Push 1.01x103 2.01x103 3.02x103 4.02x103 6.03x103 8.04x103 1.01x104 1.21x104 1.41x104 1.61x104 1.81x104 2.01x104
ø160
Pull 9.42x102 1.88x103 2.83x103 3.77x103 5.65x103 7.54x103 9.42x103 1.13x104 1.32x104 1.51x104 1.70x104 1.88x104
FK
Push 1.27x103 2.54x103 3.82x103 5.09x103 7.63x103 1.02x104 1.27x104 1.53x104 1.78x104 2.04x104 2.29x104 2.54x104
ø180
Spd Pull 1.19x103 2.39x103 3.58x103 4.77x103 7.16x103 9.54x103 1.19x104 1.43x104 1.67x104 1.91x104 2.15x104 2.39x104
Contr Push 1.57x103 3.14x103 4.71x103 6.28x103 9.42x103 1.26x104 1.57x104 1.88x104 2.20x104 2.51x104 2.83x104 3.14x104
ø200
Pull 1.47x103 2.95x103 4.42x103 5.89x103 8.84x103 1.18x104 1.47x104 1.77x104 2.06x104 2.36x104 2.65x104 2.95x104
Push 2.45x103 4.91x103 7.36x103 9.82x103 1.47x104 1.96x104 2.45x104 2.95x104 3.44x104 3.93x104 4.42x104 4.91x104
Ending ø250
Pull 2.31x103 4.63x103 6.94x103 9.25x103 1.39x104 1.85x104 2.31x104 2.78x104 3.24x104 3.70x104 4.16x104 4.63x104

654
 SCS2-B Series
How to order
How to order Cylinder 1 stroke SCP*3
Cylinder 2 stroke
S1 S2
No switch (without magnet for switch)
CMK2
SCS2-B LB 125 B 50 B 50 J Y Code Description
A Mounting CMA2
A Mounting 00 Basic
LB Axial foot
SCM
FA Rod side flange
TA Rod side trunnion
SCG
TB Head side trunnion
B Bore size (mm) SCA2
B Bore size 125 ø125
140 ø140 SCS2
160 ø160
180 ø180
CKV2
200 ø200
250 ø250 CAV2/
COVP/N2
C Port thread
C Port thread C Port thread Blank Rc thread SSD2
N NPT thread (made-to-order product)
G G thread (made-to-order product) SSG
D Cushion
D Cushion D Cushion B Both sides cushioned SSD
=S1 =S2
R Rod side cushioned
H Head side cushioned CAT
N Without cushion
E Stroke (mm) MDC2
E Stroke = S1 E Stroke = S2
Bore size Stroke Custom stroke
ø125 to ø160 1 to 800 MVC
ø180 1 to 900 In 1 mm
Precautions for model No. selection ø200 1 to 1000 increments SMG
*1: ‌Supporting hole is available custom made for ø125 to 160 only.
ø250 1 to 1200
MSD/
Contact CKD for details about dimensions. F Option MSDG
‌ he instantaneous max. temperature is the temperature when
*2: T F Option C2 With cushion section check valve
sparks, cutting chips, etc., instantaneously contact the bellows. *2
*3: Check the figures below for the cushion needle position indication. Max. ambient temp. Instantaneous ambient temp FC*
J Bellows 100°C 200°C
[Example of model No.] STK
L Bellows 250°C 400°C
SCS2-B-LB-125-B50-B50-JY M Piston rod material (stainless steel)
Model: Large bore size cylinder, double acting/back to back *3 Blank Cushion needle position (standard) SRL3
Standard
A Mounting :·Axial foot Cylinder 1 stroke 50 mm (S1) R Cushion needle position R
B Bore size :·ø125 mm + Cylinder 2 stroke 50 mm (S2) T R
S Cushion needle position S SRG3
C Port thread :·Rc thread Total stroke 100 mm (S1 + S2) S
T Cushion needle position T
D Cushion :·With two-sided air cushion
Cylinder 1 S1 S2 P6 Copper and PTFE free (made to order) SRM3
E Stroke S1 :·50 mm
C Port thread :·Rc thread G Accessory
D Cushion :·With two-sided air cushion G Accessory I Rod eye SRT3
Cylinder 2
E Stroke S2 :·50 mm Y Rod clevis (pin and snap ring included)
F Option :·Bellows material for max. ambient temperature 100°C MRL2
G Accessory :·Rod clevis
MRG2
Cushion needle position
SM‑25
(Needle position with the port on the top when viewed from the rod end)
Certified class 2 pressure ShkAbs
Port Standard vessel stroke
Bore size S1 + S2 stroke FJ
ø180 1481 or more
T R ø200 892 or more FK
ø250 690 or more
Spd
S Contr

Ending

655
 SCS2-B Series
SCP*3
Internal structure

CMK2

CMA2

SCM

SCG

SCA2

SCS2
Note: ‌The parts list is common with double acting SCS2 Series. Two sets of the parts are
CKV2 required. Refer to page 629.
CAV2/
COVP/N2
Repair parts list
SSD2
The parts are common with SCS2 Series and two sets of them are required. Refer to page 629.
SSG

SSD
Applications
CAT
When the same strokes are combined, When different strokes are combined, 4
MDC2 3 positions are available. positions are available.

MVC 3 2 1 Base line 4 3 2 1 Base line

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3

SRM3

SRT3

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

656
 SCS2-B Series
Dimensions
Dimensions SCP*3
Basic (00) A View

X + S1* + S2* CMK2

Cushion needle adjustment
K A WF LL + S1* LL + S2* M
N C V GA GB GB GA CMA2
8-D
P QA 4-EE QB QB QA
T
SCM

øMM
L
SCG
N
K

øJ
T R
KK SCA2
Width across flats B
S SCS2
Cylinder 1 Cylinder 2
X + (S1 +L1) + (S2 +L2)
A WF +L1 CKV2
b
I I CAV2/
COVP/N2

P F

P F
F P

F P
ød

Rod side Head side

SSD2
I I
SSG

[With bellows] SSD

Port position diagram (A View)
CAT
*1: , and indicate the cushion needle position. *: S1 = Cylinder 1 stroke, S2 = Cylinder 2 stroke
Code
A B C D EE GA GB F I J K KK L LL M MM MDC2
Bore size (mm)
ø125 50 46 47 M14x1.5 Rc1/2 30.5 30.5 20 16 57 140 M30x1.5 78 to 82 92 13.5 32
MVC
ø140 50 46 47 M14x1.5 Rc3/4 34.5 34.5 20 20 57 157 M30x1.5 86.5 to 91 103 13.5 32
ø160 56 55 53 M16x1.5 Rc3/4 34.5 34.5 24 20 62 177 M36x1.5 96.5 to 101 106 15.5 40
SMG
ø180 63 60 60 M18x1.5 Rc3/4 34.5 34.5 24 20 68 200 M40x1.5 108 to 112 110 17.5 45
ø200 72 70 69 M20x1.5 Rc3/4 37.5 37.5 24 20.5 75 220 M45x1.5 120.5 to 129 123 18.5 50 MSD/
ø250 88 85 84 M24x1.5 Rc1 42.5 42.5 24 20.5 93 274 M56x2 147.5 to 156 141 21.5 60 MSDG
Code With bellows FC*
N T P QA QB V WF X
Bore size (mm) b d L
ø125 110 18 13 15 15 45.5 65 414 74 75 (Stroke/4.55) + 11 STK
ø140 124 18 15 17 17 45.5 67 440 74 75 (Stroke/4.55) + 9
ø160 142 21 15 17 17 48 71 466 82 80 (Stroke/5.15) + 9 SRL3
ø180 160 24 15 17 17 53 78 502 91 90 (Stroke/5.15) + 9
ø200 175 27 20 18 18 60 88 566 102 95 (Stroke/5.30) + 9 SRG3
ø250 216 34 22 21 21 64 94 646 120 120 (Stroke/6.40) + 9

Note: ‌Dimensions of other mounting are the same as those of double acting SCS2 Series. Refer to pages 631 to SRM3
638. Installation positions of the flange (mounting: FA) and trunnion (mounting: TA/TB/TD/TE) are as below.
SRT3

Flange MRL2

MRG2

SM‑25
Cylinder 1 Cylinder 2
Mounting: FA ShkAbs
Trunnion Trunnion
FJ

FK

Cylinder 1 Cylinder 2 Cylinder 1 Cylinder 2 Spd

Contr
Mounting: TA, TD Mounting: TB, TE

Ending
* For the dimensions of the accessories, refer to page 639.
657
 Large bore size cylinder
Double acting/2-stage

SCP*3
SCS2-W Series
Bore size: ø125/ø140/ø160/ø180/ø200/ø250
CMK2

CMA2

SCM * Made-to-order product.

Specifications
SCG Item SCS2-W (2-stage)
Bore size mm ø125 ø140 ø160 ø180 ø200 ø250
SCA2 Actuation Double acting
Working fluid Compressed air
SCS2 Max. working pressure MPa 1.0 (≈150 psi, 10 bar) *1
Min. working pressureMPa 0.1 (≈15 psi, 1 bar)
CKV2 Proof pressure MPa 1.6 (≈230 psi, 16 bar)
Ambient temperature °C -5 (23°F) to 60 (140°F) (no freezing)
CAV2/
COVP/N2 Port size Rc1/2 Rc3/4 Rc1
+1.0 +1.4 +1.8
Stroke tolerance mm 0 ( to 300), 0 ( to 1000), 0 ( to 1200)
SSD2 Working piston speed mm/s 20 to 1000 (Operate within the absorbed energy.)
Cushion Air cushion
SSG Effective air cushion length mm 21.6 21.6 21.6 21.6 26.6 26.6
Lubrication Required (use turbine oil class 1 ISO VG32 for lubrication)
SSD Cushioned 63.5 91.5 116 152 233 362
Allowable
0.371 0.386 0.386 0.958 1.08 2.32
absorbed Without
CAT Without any cushion, this product cannot absorb large energy generated by an external load.
energy  J cushion
We recommend using an external shock absorber.
MDC2 *1: Max. working pressure is 0.5 MPa when S1 and S2 are the same value.

MVC Stroke
Bore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm) Trunnion min. stroke (mm)
SMG ø125 23
ø140 800 25
MSD/
ø160 50/75/100/150/ 2 27
MSDG
ø180 200/250/300 900 (Total stroke) 28
FC* ø200 1,000 28
ø250 1,200 28
STK *1: The custom stroke is available in 1 mm increments.

SRL3
Cylinder weight (Unit: kg)

SRG3 Item/mounting Product weight when stroke (S) = 0 mm Additional

Basic Axial foot Flange Eye bracket Clevis bracket Trunnion weight per
Bore size (mm)
SRM3 (00) (LB) (FA/FB) (CA) (CB) (TA/TB/TC) S = 100 mm
ø125 18.62 20.12 21.92 21.62 21.72 22.02 1.54
SRT3 ø140 23.99 25.99 29.39 27.79 27.99 27.19 1.78
ø160 31.38 34.48 38.28 36.38 36.68 37.78 2.22
MRL2 ø180 43.50 48.00 55.50 50.90 51.40 51.60 2.96
ø200 58.38 64.08 72.08 67.88 68.08 70.18 3.54
MRG2 ø250 103.53 111.93 129.43 127.53 122.03 132.23 5.38
Product weight for S = 0 mm stroke············ 20.12 kg
SM‑25 (Example) Product weight of SCS2-W-LB-125B-300-300 Additional weight for S = 300 mm stroke············ 2 x 1.54 x 300
100
= 9.24 kg
Product weight······························· 20.12 + 9.24 = 29.36 kg
ShkAbs

FJ

FK
Spd
Contr

Ending

658
 SCS2-W Series
How to order
How to order Total stroke
1st stage stroke SCP*3
S1
No switch (without magnet for switch) S2
CMK2
SCS2-W LB 125 B 200 B 50 J Y
Code Description
A Mounting CMA2
A Mounting
00 Basic
*1
LB Axial foot SCM
FA Rod side flange
FB Head side flange SCG
CA Eye bracket
CB Clevis bracket (pin and snap ring included) SCA2
TA Rod side trunnion
TB Head side trunnion SCS2
B Bore size (mm)
B Bore size 125 ø125 CKV2
140 ø140
160 ø160 CAV2/
COVP/N2
180 ø180
200 ø200 SSD2
250 ø250
C Port thread SSG
C Port thread C Port thread
Blank Rc thread
N NPT thread (made-to-order product) SSD
G G thread (made-to-order product)
Precautions for model No. selection D Cushion CAT
D Cushion D Cushion
*1: S ‌ upporting hole is available custom made for ø125 to B Both sides cushioned
160 only. Contact CKD for details about dimensions. =S1 =S2
R Rod side cushioned MDC2
*2: ‌The max. stroke of S2 (1st stage) is 200
H Head side cushioned
mm.
*3: ‌The instantaneous max. temperature is the N Without cushion MVC
temperature when sparks, cutting chips, E Stroke (mm)
etc., instantaneously contact the bellows. E Stroke = S1 E Stroke = S2
*4: ‌Check the figures below for the cushion
Bore size Stroke Custom stroke SMG
*2
needle position indication. ø125 to ø160 2 to 800
ø180 2 to 900 In 1 mm MSD/
[Example of model No.] MSDG
ø200 2 to 1000 increments
SCS2-W-LB-125-B200-B50-JY ø250 2 to 1200
Model: Large bore size cylinder, double acting/2-stage
FC*
Mounting :·Axial foot
F Option
F Option
B Bore size :·ø125 mm C2With cushion section check valve STK
*3
C Port thread :·Rc thread Max. ambient temp. Instantaneous ambient temp
D Cushion :·Both sides cushioned J Bellows 100°C 200°C SRL3
Cylinder 1
E Stroke S1 :·Total stroke 200 mm L Bellows 250°C 400°C
C Port thread :·Rc thread M Piston rod material (stainless steel) SRG3
D Cushion :·Both sides cushioned *4 Blank Cushion needle position (standard)
Cylinder 2 Standard
E Stroke S2 :·1st stage stroke 50 mm R Cushion needle position R
F Option T R SRM3
:·Bellows material for max. ambient temperature 100°C S Cushion needle position S
G Accessory : Rod clevis S
T Cushion needle position T
1st stage stroke· · · · 50 mm (S2) SRT3
P6 Copper and PTFE free (made to order)
+ 2nd stage stroke· · · · 150 mm
Total stroke 200 mm (S1) G Accessory MRL2
G Accessory
I Rod eye
Y Rod clevis (pin and snap ring included) MRG2
Cushion needle position S1 S2 B1 Eye bracket
B2 Clevis bracket (pin and snap ring included)
(Needle position with the port on the top when viewed from the rod end) SM‑25

Certified class 2 pressure ShkAbs

Port Standard vessel stroke
Bore size S1 + S2 stroke FJ
ø200 892 or more
T R ø250 690 or more FK
Spd
S Contr

Ending

659
 SCS2-W Series
SCP*3
Internal structure and parts list

CMK2
11 12

CMA2

21 19 20 13 14 15 16 17 18 22 23 25
SCM 12
For ‌ø200,
ø250
SCG

SCA2

SCS2

CKV2
CAV2/
COVP/N2
1 2 3 4 5 6 7 8 9 24 26 10
SSD2

SSG Note: 14 , 19 , 20 and 21 are not required for the type without cushion.
No. Part name Material Remarks No. Part name Material Remarks
SSD 1 Hexagon nut Steel Zinc chromate 14 Cushion packing Nitrile rubber/steel
2 Bush Iron-copper oil-impregnated bearing alloy 15 Cylinder tube Aluminum alloy Hard alumite
CAT 3 Rod cover Aluminum alloy casting Chromate 16 Piston packing Nitrile rubber
4 Tie rod Steel Zinc chromate 17 Wear ring Polyacetal resin
MDC2 5 Piston rod A Steel Industrial chrome plating 18 Cushion ring B Steel Zinc chromate
6 Cushion ring A Steel Zinc chromate Copper alloy (ø125 to ø180)
19 Cushion needle
MVC 7 Piston gasket Nitrile rubber Steel (ø200, 250) Zinc chromate
8 Piston Aluminum alloy casting 20 Hexagon nut Steel Zinc chromate
SMG 9 Intermediate cover (1) Aluminum alloy casting Chromate 21 Needle gasket Nitrile rubber
10 Hexagon nut Steel Zinc chromate 22 Intermediate plate Cast iron Paint
MSD/ 11 Dust wiper Nitrile rubber ø200 and ø250 only 23 Metal gasket Nitrile rubber
MSDG
12 Rod packing Nitrile rubber 24 Intermediate cover (2) Aluminum alloy casting Chromate

FC* 13 Cylinder gasket Nitrile rubber 25 Piston rod B Steel Industrial chrome plating
26 Head cover Aluminum alloy casting Chromate

STK

SRL3 Repair parts list

Bore size (mm) Kit No. Repair parts No.
SRG3 ø125 SCS2-W-125K
ø140 SCS2-W-140K
12 13 14 16 17 21 23
SRM3 ø160 SCS2-W-160K
ø180 SCS2-W-180K
SRT3 ø200 SCS2-W-200K
11 12 13 14 16 17 21 23
ø250 SCS2-W-250K
MRL2

MRG2 Applications
SM‑25
Pressure setting: P2 > P1 4 32 1 P2 = P1 is allowed depending
4
1st stage push on the load direction.When
ShkAbs Keeping port 4 pressurized, using a single acting cylinder
pressurize port 1. with free fall load, ports 2 and 2
3 2 1
2nd stage push 4 in the upper figure and ports
FJ Keeping port 1 pressurized, 2 and 3 in the lower figure are
pressurize port 3. breathing holes.
FK Cushion performance will be
P1
P2 better when all ports are piped
even if piping them is not 2
Spd necessary (port 2 in this case).
3
Contr

Ending

660
 SCS2-W Series
Double acting/2-stage
Dimensions SCP*3
Basic (00) A View
CMK2
(SG + S1* + S2*)
Cushion needle adjustment H LL + S2* M
A WF LL + S1*
K
C V GA GC GC GB
CMA2
N QC
8-D
P QA 4-EE QB
T QC
SCM

øMM
L SCG
N
K

øJ
T R SCA2
KK
Width across flats B
SCS2
S

SG + L + S1 + S2
CKV2
A WF + L
b
IC CAV2/
COVP/N2

P F
F P

F P
F P
ød

Rod side Head side SSD2

IA IC IA
SSG

[With bellows] SSD

Port position diagram (A View)
CAT
*1: , and indicate the cushion needle position. *: S1 = Cylinder 1 stroke, S2 = Cylinder 2 stroke
Code Basic (00) Basic dimensions MDC2
Bore size (mm) A B C D EE GA GB GC F IA IC H J K KK L
ø125 50 46 47 M14x1.5 Rc1/2 30.5 30.5 29.5 20 16 15 28 57 140 M30x1.5 78 to 82 MVC
ø140 50 46 47 M14x1.5 Rc3/4 34.5 34.5 33.5 20 20 19 28 57 157 M30x1.5 86.5 to 91
ø160 56 55 53 M16x1.5 Rc3/4 34.5 34.5 33.5 24 20 19 28 62 177 M36x1.5 96.5 to 101 SMG
ø180 63 60 60 M18x1.5 Rc3/4 34.5 34.5 33.5 24 20 19 33 68 200 M40x1.5 108 to 112
ø200 72 70 69 M20x1.5 Rc3/4 37.5 37.5 36.5 24 20.5 19.5 35 75 220 M45x1.5 120.5 to 129 MSD/
MSDG
ø250 88 85 84 M24x1.5 Rc1 42.5 42.5 41.5 24 20.5 24.5 39 93 274 M56x2 147.5 to 156
Code With bellows FC*
Bore size (mm) LL LL MM M P QA QB QC N SG T V WF b d L
ø125 91 92 32 13.5 13 15 15 14 110 339.5 18 45.5 65 74 75 (Stroke/4.55) + 11 STK
ø140 102 103 32 13.5 15 17 17 16 124 363.5 18 45.5 67 74 75 (Stroke/4.55) + 9
ø160 105 106 40 15.5 15 17 17 16 142 381.5 21 48 71 82 80 (Stroke/5.15) + 9 SRL3
ø180 109 110 45 17.5 15 17 17 16 160 410.5 24 53 78 91 90 (Stroke/5.15) + 9
ø200 122 123 50 18.5 20 18 18 17 175 458.5 27 60 88 102 95 (Stroke/5.30) + 9 SRG3
ø250 140 141 60 21.5 22 21 21 20 216 523.5 34 64 94 120 120 (Stroke/6.40) + 9
SRM3
Note: ‌Dimensions of other mounting are the same as those of double acting SCS2 Series.
Refer to pages 631 to 638. Installation positions of the flange (mounting: FA/FB) and SRT3
trunnion (mounting: TA/TB/TD/TE) are as below.
Flange Flange MRL2

MRG2

SM‑25
Cylinder 1 Cylinder 2 Cylinder 1 Cylinder 2
Mounting: FA Mounting: FB ShkAbs
Trunnion Trunnion
FJ

FK
Spd
Cylinder 1 Cylinder 2 Cylinder 1 Cylinder 2 Contr
Mounting: TA, TD Mounting: TB, TE
Ending
* For the dimensions of the accessories, refer to page 639.
661
 Large bore size cylinder
Double acting/low hydraulic

SCP*3
SCS2-H Series
Bore size: ø125/ø140/ø160/ø180/ø200/ø250
CMK2
JIS symbol
CMA2

SCM * Made-to-order product.

Specifications
SCG Item SCS2-H/SCS2-LH (low hydraulic)
Bore size mm ø125 ø140 ø160 ø180 ø200 ø250
SCA2 Actuation Double acting
Working fluid Hydraulic fluid
SCS2 Max. working pressure MPa 1.0 (≈150 psi, 10 bar)
Min. working pressureMPa 0.1 (≈15 psi, 1 bar)
CKV2 Proof pressure MPa 1.6 (≈230 psi, 16 bar)
Ambient temperature °C 5 (41°F) to 50 (122°F)
CAV2/
COVP/N2 Port size Rc1/2 Rc3/4 Rc1
+1.0 +1.4
Stroke tolerance mm 0 ( to 300), 0 ( to 1000), +1.8
0 ( to 1200)
SSD2 Cushion Cushion
Effective air cushion length mm 21.6 21.6 21.6 21.6 26.6 26.6
SSG The cushioning of the low hydraulic cylinder cannot absorb large
Cushioned
Allowable energy. We recommend using an external shock absorber.
SSD absorbed 0.371 0.386 0.386 0.958 1.08 2.32
Without
energy  J Without any cushion, this product cannot absorb large energy generated
CAT cushion
by an external load. We recommend using an external shock absorber.

MDC2
Stroke
MVC Bore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm) Trunnion min. stroke (mm)
ø125 23
SMG ø140 800 25
ø160 50/75/100/150/ 27
MSD/ 20
MSDG ø180 200/250/300 900 28
ø200 1,000 28
FC* ø250 1,200 28
*1: The custom stroke is available in 1 mm increments.
STK

SRL3
Min. stroke with switch
SRG3 Item Stroke when mounted Stroke of intermediate Stroke of rod side Stroke of head side
Bore size (mm) on the same surface supporting hole trunnion supporting hole trunnion supporting hole trunnion
SRM3 Sketch Port Port Port Port

SRT3 Switch

Bore size Position cannot be detected Position cannot be detected

MRL2 at the rod side stroke end. at the head side stroke end.

ø125 120 or more 70 or more

MRG2 ø140 125 or more 75 or more
ø160 130 or more 80 or more
Reed switch (T*) 20 or more
SM‑25 ø180 135 or more 85 or more
ø200 140 or more 90 or more
ShkAbs ø250 150 or more 100 or more

FJ

FK
Spd
Contr

Ending

662
 SCS2-H Series
Specifications
Switch specifications SCP*3
1-color/2-color LED/for AC magnetic field proof
2-wire proximity 3-wire proximity 2-wire reed 2-wire proximity CMK2
Item T1H/ T2H/T2V/ T2YH/ T2WH/ T3H/ T3PH/ T3YH/ T3WH/ T2YD (*4)
T0H/T0V T5H/T5V T8H/T8V
T1V T2JH/T2JV T2YV T2WV T3V T3PV T3YV T3WV T2YDT CMA2
For programmable Dedicated for For programmable For programmable For programmable controller, For programmable For
Applications controller, relay, relay, IC circuit (no indicator programmable
compact solenoid valve programmable controller controller, relay controller, relay lamp), serial connection controller, relay controller SCM
Output method - NPN output PNP output NPN output NPN output -
Pwr. supp. V. - 10 to 28 VDC - SCG
Load voltage 85 to 265 VAC 10 to 30 VDC 24 VDC ±10% 30 VDC or less 12/24 VDC 110 VAC 5/12/24 VDC 110 VAC 12/24 VDC 110 VAC 220 VAC 24 VDC ±10%
Load current 5 to 100 mA 5 to 20 mA (*3) 100 mA or less 50 mA or less 5 to 50 mA 7 to 20 mA 50 mA or less 20 mA or less 5 to 50 mA 7 to 20 mA 7 to 10 mA 5 to 20 mA
SCA2
Red/green Red/green Yellow Red/green Red/green Red/green
LED LED LED LED No indicator LED
Indicator LED LED LED LED LED LED
(Lit when ON) (Lit when ON) (Lit when ON) (Lit when ON) lamp (Lit when ON) SCS2
(Lit when ON) (Lit when ON) (Lit when ON) (Lit when ON) (Lit when ON) (Lit when ON)
≤ 1 mA at 100 VAC,
Leakage current 1 mA or less 10 μA or less 0 mA 1 mA or less
≤ 2 mA at 200 VAC CKV2
1 m:33 1 m:18 1 m:33 1 m:18 1 m:18 1 m:33 1 m:18 1 m:33 1 m:61
CAV2/
Weightg 3 m:87 3 m:49 3 m:87 3 m:49 3 m:49 3 m:87 3 m:49 1 m:18 3 m:49 5 m:80 3 m:87 3 m:166
COVP/N2
5 m:142 5 m:80 5 m:142 5 m:80 5 m:80 5 m:142 5 m:80 5 m:142 5 m:272
*1 : Refer to Ending Page 1 for detailed switch specifications and dimensions. SSD2
*2 : Switches other than the above models, such as switches with connectors, are also available. Refer to Ending Page 1.
*3 : Max. load current: 20 mA at 25°C. The current is lower than 20 mA if the operating ambient temperature around the switch is higher than 25˚C. SSG
(5 to 10 mA at 60°C)
*4 : Switch for AC magnetic field (T2YD/T2YDT) cannot be used in DC magnetic field.
SSD

Cylinder weight (Unit: kg) CAT

Item/mounting Product weight when stroke (S) = 0 mm Switch weight Additional
Bore size Basic Axial foot Flange Eye bracket Clevis bracket Trunnion weight per MDC2
Switch Mounting bracket
(mm) (00) (LB) (FA/FB) (CA) (CB) (TA/TB/TC) S = 100 mm
ø125 7.22 8.72 10.52 10.22 10.32 10.62 0.028 1.54 MVC
ø140 9.35 11.35 14.75 13.15 13.35 12.55 Refer to 0.030 1.78
ø160 12.35 15.45 19.25 17.35 17.65 18.75 the weight 0.034 2.22 SMG
ø180 16.75 21.25 28.75 24.15 24.65 24.85 in the switch 0.038 2.96
MSD/
ø200 22.78 28.48 36.48 32.28 32.48 34.58 specifications. 0.040 3.54
MSDG
ø250 40.51 48.91 66.41 64.51 59.01 69.21 0.045 5.38
Product weight for S = 0 mm stroke············· 8.72 kg FC*
300
Additional weight for S = 300 mm stroke··········· 1.54 x 100 = 4.62 kg
(Example) Product weight of SCS2-LH-LB-125B-300-TOH-D Weight of 2 switches (T0H-D)··············· 0.018 x 2 = 0.036 kg STK
Product weight with 2 switch brackets···· 0.028 x 2 = 0.056 kg
Product weight·································· 8.72 + 4.62 + 0.036 + 0.056 = 13.432 kg SRL3

SRG3
Theoretical thrust table (Unit: N)
SRM3
Bore size Operating Working pressure MPa
(mm) direction 0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
SRT3
Push 1.23x103 1.84x103 2.45x103 3.68x103 4.91x103 6.14x103 7.36x103 8.59x103 9.82x103 1.10x104 1.23x104
ø125
Pull 1.15x103 1.72x103 2.29x103 3.44x103 4.59x103 5.73x103 6.88x103 8.03x103 9.17x103 1.03x104 1.15x104
Push 1.54x103 2.31x103 3.08x103 4.62x103 6.16x103 7.70x103 9.24x103 1.08x104 1.23x104 1.39x104 1.54x104
MRL2
ø140
Pull 1.46x103 2.19x103 2.92x103 4.38x103 5.84x103 7.29x103 8.75x103 1.02x104 1.17x104 1.31x104 1.46x104
Push 2.01x103 3.02x103 4.02x103 6.03x103 8.04x103 1.01x104 1.21x104 1.41x104 1.61x104 1.81x104 2.01x104 MRG2
ø160
Pull 1.88x103 2.83x103 3.77x103 5.65x103 7.54x103 9.42x103 1.13x104 1.32x104 1.51x104 1.70x104 1.88x104
Push 2.54x103 3.82x103 5.09x103 7.63x103 1.02x104 1.27x104 1.53x104 1.78x104 2.04x104 2.29x104 2.54x104 SM‑25
ø180
Pull 2.39x103 3.58x103 4.77x103 7.16x103 9.54x103 1.19x104 1.43x104 1.67x104 1.91x104 2.15x104 2.39x104
Push 3.14x103 4.71x103 6.28x103 9.42x103 1.26x104 1.57x104 1.88x104 2.20x104 2.51x104 2.83x104 3.14x104 ShkAbs
ø200
Pull 2.95x103 4.42x103 5.89x103 8.84x103 1.18x104 1.47x104 1.77x104 2.06x104 2.36x104 2.65x104 2.95x104
Push 4.91x103 7.36x103 9.82x103 1.47x104 1.96x104 2.45x104 2.95x104 3.44x104 3.93x104 4.42x104 4.91x104 FJ
ø250
Pull 4.63x103 6.94x103 9.25x103 1.39x104 1.85x104 2.31x104 2.78x104 3.24x104 3.70x104 4.16x104 4.63x104
FK
Spd
Contr

Ending

663
 SCS2-H Series
SCP*3
How to order
No switch (without magnet for switch)
CMK2
SCS2-H LB 125 B 50 J Y Code Description
A Mounting
CMA2 With switch (built-in magnet for switch) 00 Basic
LB Axial foot
SCS2-LH LB 125 B 50 T0H R J Y FA Rod side flange
SCM FB Head side flange
CA Eye bracket
CB Clevis bracket (pin and snap ring included)
SCG A Mounting TC Intermediate trunnion
*1 TA Rod side trunnion
TB Head side trunnion
SCA2
B Bore size (mm)
B Bore size 125 ø125
SCS2 140 ø140
160 ø160
180 ø180
CKV2 200 ø200
250 ø250
CAV2/ C Port thread
COVP/N2 C Port thread Blank Rc thread
N NPT thread (made-to-order product)
SSD2 G G thread (made-to-order product)
D Cushion
D Cushion B Both sides cushioned
SSG R Rod side cushioned
H Head side cushioned
SSD Precautions for model No. selection N Without cushion

*1 : ‌Supporting hole is available custom made for ø125

E Stroke (mm)
E Stroke Bore size Stroke *2 Custom stroke
CAT to 160 only. Contact CKD for details about
ø125 to ø160 20 to 800
dimensions. ø180 20 to 900 In 1 mm
*2 : ‌Refer to page 662 for the min. stroke with ø200 20 to 1000 increments
MDC2 switch. ø250 20 to 1200
*3 : ‌When selecting TA or TB as mounting, the number
of switches is limited to "H" (1 on head side) for TA,
F Switch model No.
MVC

Contact
and "R" (1 on rod side) for TB.
F Switch model No. Axial Radial lead Voltage Lead
Indicator
*4 : ‌The instantaneous max. temperature is the temperature when lead wire wire AC DC wire
SMG sparks, cutting chips, etc., instantaneously contact the bellows. T0H* T0V* Reed 1-color LED
*5 : ‌Check the figures below for the cushion needle T5H* T5V* No indicator lamp 2-wire
position indication. T8H* T8V* 1-color LED
MSD/ T1H* T1V*
MSDG *6 : "I" and "Y" cannot be selected together. 2-wire
T2H* T2V* 1-color LED
*7 : Refer to page 667 for details. T3H* T3V*
3-wire
FC* T3PH* T3PV* 1-color LED (PNP output)
Proximity

[Example of model No.] T2WH* T2WV*

2-wire
T2YH* T2YV*
STK SCS2-LH-LB-125B-50-T0H-R-JY T3WH* T3WV*
2-color LED
3-wire
Model: Large bore size cylinder, double acting/low hydraulic with switch T3YH* T3YV*
T2YD* - 2-color LED
SRL3 A Mounting :·Axial foot T2YDT* - AC magnetic field
2-wire
B Bore size :·ø125 mm T2JH* T2JV* 1-color LED off-delay 2-wire
SRG3 C Port thread :·Rc thread * Lead wire length
D Cushion :·With two-sided air cushion Blank 1 m (standard)
3 3 m (option)
E Stroke :·50 mm
SRM3 5 5 m (option)
F Switch model No.:·Proximity T0H switch, lead wire 1 m
G Switch quantity
G Switch quantity :·1 on rod side G Switch quantity R 1 on rod side
SRT3 H Option :·Bellows material for max. ambient temperature 100°C *3 H 1 on head side
I Accessory :·Rod clevis D 2
T 3
MRL2 4 4
Cushion needle position H Option
MRG2 (Needle position with the port on the top when viewed from the rod end) H Option C2
With cushion section check valve
*4 Max. ambient temp. Instantaneous ambient temp
J Bellows 100°C 200°C
SM‑25 Certified class 2 pressure vessel
Port Standard L Bellows 250°C 400°C
stroke M Piston rod material (stainless steel)
ShkAbs Bore size Stroke *5 Blank Cushion needle position (standard) Standard
R Cushion needle position R
ø200 946 or more T R
T R S Cushion needle position S
FJ ø250 752 or more T Cushion needle position T S
P6 Copper and PTFE free (made to order)

FK I Accessory
S
I Accessory I Rod eye
*6 Y Rod clevis (pin and snap ring included)
Spd B1 Eye bracket
Contr B2 Clevis bracket (pin and snap ring included)
Made-to-order product code *7
Ending -SO92 SCS-LH compatible mounting dimensions

664
 SCS2-H Series
How to order
How to order switch SCP*3
Switch body + mounting bracket set Switch body only Mounting bracket set

SCS2-LN T0H 125 SW T0H SCS2-LN TS 125 CMK2

CMA2
Bore size (Item B on Switch model No. Bore size (Item B on
page 664) (Item F on page 664) page 664) SCM

Switch model No. Mounting bracket SCG

(Item F on page 664) TS T-switch
T T2YD switch SCA2

SCS2

CKV2
Internal structure and parts list
CAV2/
COVP/N2

11 12 13 14 15 16 17 22 23
SSD2
21 19 20

SSG

18
SSD

CAT

MDC2

MVC

1 2 3 4 5 6 7 8 9 10 For ø250
SMG
MSD/
MSDG
No. Part name Material Remarks No. Part name Material Remarks
FC*
1 Hexagon nut Steel Zinc chromate 13 Cylinder gasket Nitrile rubber
2 Bush Iron-copper oil-impregnated bearing alloy 14 Cushion packing Nitrile rubber/steel
STK
3 Rod cover Aluminum alloy casting Chromate 15 Cylinder tube Aluminum alloy Hard alumite
4 Tie rod Steel Zinc chromate 16 Piston packing Nitrile rubber
5 Piston rod Steel Industrial chrome plating 17 Wear ring Polyacetal resin
SRL3
6 Cushion ring A Steel Zinc chromate 18 Cushion ring B Steel Zinc chromate
7 Piston gasket Nitrile rubber Copper alloy (ø125 to ø180)
SRG3
19 Cushion needle
8 Piston Aluminum alloy casting Steel (ø200, 250) Zinc chromate
9 Head cover Aluminum alloy casting Chromate 20 Hexagon nut Steel Zinc chromate
SRM3
10 Hexagon nut Steel Zinc chromate 21 Needle gasket Nitrile rubber
11 Dust wiper Nitrile rubber 22 Scraper retainer plate Steel Manganese phosphate
SRT3
12 Rod packing Nitrile rubber 23 Hexagon socket head cap screw Steel Black finish
MRL2

MRG2
Repair parts list
Bore size (mm) Kit No. Repair parts No.
SM‑25
ø125 SCS2-H-125K
ø140 SCS2-H-140K
ShkAbs
ø160 SCS2-H-160K
11 12 13 14 16 17 21
ø180 SCS2-H-180K FJ
ø200 SCS2-H-200K
ø250 SCS2-H-250K FK
Spd
Contr

Ending

665
 SCS2-H Series
SCP*3
Dimensions
Basic (00)
CMK2 MN

CMA2

MO
(Width across flats)

SCM

SCG X + stroke
A WF LL + stroke (M)
V GA 30 HD1
SCA2 A View
K QA GB
X + L + stroke N C RD1 30 QB
8-D
A WF +L P T U
SCS2 2-EE
b

øMM
CKV2

P1
L
CAV2/
ød

øJ
K

COVP/N2 T R

KK
SSD2 Width across flats B
S
SSG [With bellows]

SSD 2-color LED with strong magnetic field proof switch

CAT RD2 HD2

MDC2
P2

MVC
F P

F P

Rod side Head side

SMG I I

MSD/
MSDG

FC* RD: Rod side max. sensitivity position

Port position diagram (A View) HD: Head side max. sensitivity position

STK

*1: , and indicate the cushion needle position.

SRL3
*2: L dimensions below decimal point are rounded up.
Code Basic (00) Basic dimensions
SRG3
Bore size (mm) A B C D EE GA GB F I J K KK L LL M MM MN MO N P QA QB
ø125 50 46 47 M14x1.5 Rc1/2 30.5 30.5 20 16 57 140 M30x1.5 78 to 82 92 13.5 32 15 27 110 13 15 15
SRM3
ø140 50 46 47 M14x1.5 Rc3/4 34.5 34.5 20 20 57 157 M30x1.5 86.5 to 91 103 13.5 32 15 27 124 15 17 17
ø160 56 55 53 M16x1.5 Rc3/4 34.5 34.5 24 20 62 177 M36x1.5 96.5 to 101 106 15.5 40 15 36 142 15 17 17
SRT3
ø180 63 60 60 M18x1.5 Rc3/4 34.5 34.5 24 20 68 200 M40x1.5 108 to 112 110 17.5 45 17 41 160 15 17 17
ø200 72 70 69 M20x1.5 Rc3/4 37.5 37.5 24 20.5 75 220 M45x1.5 120.5 to 129 123 18.5 50 20 46 175 20 18 18
MRL2
ø250 88 85 84 M24x1.5 Rc1 42.5 42.5 24 20.5 93 274 M56x2 147.5 to 156 141 21.5 60 22 55 216 22 21 21

MRG2 Code With bellows With switch T0,T5,T2,T3 T2W,T3W T2Y,T3Y,T2YD,T1,T2J T8

Bore size (mm) T U V WF X b d L P1 P2 RD1 HD1 RD1 HD1 RD2 HD2 RD2 HD2
ø125 18 19 45.5 65 220.5 74 75 (Stroke/4.55) + 11 76 80 8.5 4.0 10.5 5.5 7.5 2.5 2.5 0.0
SM‑25
ø140 18 19 45.5 67 233.5 74 75 (Stroke/4.55) + 9 82 86 8.5 7.0 10.5 8.5 7.5 5.5 2.5 0.5

ShkAbs ø160 21 19 48 71 248.5 82 80 (Stroke/5.15) + 9 90 95 10.5 8.0 12.5 10.0 9.5 7.0 4.5 1.5
ø180 24 19 53 78 268.5 91 90 (Stroke/5.15) + 9 98 103 13.0 9.5 14.5 11.5 11.5 8.5 6.5 3.5

FJ ø200 27 24 60 88 301.5 102 95 (Stroke/5.30) + 9 106 111 17.5 13.0 19.0 15.0 16.0 12.0 11.0 7.0
ø250 34 24 64 94 344.5 120 120 (Stroke/6.40) + 9 126 130 18.5 19.0 20.5 20.5 17.5 17.5 12.5 12.5

FK Note: D
 imensions of other mounting are the same as those of double acting SCS2 Series. Refer to pages 631 to 638.
Spd ‌SCS2-LH (with switch) is not dimensionally compatible with SCS-LH (with switch). (All lengths shorter) If
Contr you need the same dimensions, use the dimensionally compatible mounting on the next page.

Ending
* For the dimensions of the accessories, refer to page 639.
666
 SCS2-H Series
Introduction of custom order products
Introduction of custom order products SCP*3
SCS-LH compatible mounting dimensions CMK2
How to order
CMA2
When placing an order, add "-SO92" at the end of the model No.

Dimensions SCM

SCG
LL + stroke
Code Dimensions table
SCA2
Bore size (mm) LL
ø125 111.5
SCS2
ø140 122.5
ø160 122.5
CKV2
ø180 124.5
ø200 143.5 CAV2/
ø250 COVP/N2

SSD2
*1: The center trunnion should be installed at the middle point between the covers.
*2: Refer to the right table for LL mentioned in the dimensions above.
SSG

SSD

CAT

MDC2

MVC

SMG
MSD/
MSDG

FC*

STK

SRL3

SRG3

SRM3

SRT3

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

667
 Large bore size cylinder
Double acting/rubber scraper

SCP*3
SCS2-G Series
Bore size: ø125/ø140/ø160/ø180/ø200/ø250
CMK2
JIS symbol
CMA2

SCM * Made-to-order product.

Specifications
SCG Item SCS2-G (rubber scraper)
Bore size mm ø125 ø140 ø160 ø180 ø200 ø250
SCA2 Actuation Double acting
Working fluid Compressed air
Max. working pressure MPa 1.0 (≈150 psi, 10 bar)
SCS2
Min. working pressure MPa 0.05 (≈7.3 psi, 0.5 bar)
Proof pressure MPa 1.6 (≈230 psi, 16 bar)
CKV2
Ambient temperature °C -5 (23°F) to 60 (140°F) (no freezing)
CAV2/ Port size Rc1/2 Rc3/4 Rc1
0 ( to 300), 0 ( to 1000), 0 ( to 1200)
+1.0 +1.4 +1.8
COVP/N2 Stroke tolerance mm
Working piston speed mm/s 20 to 1000 (Operate within the absorbed energy.)
SSD2 Cushion Air cushion
Effective air cushion length mm 21.6 21.6 21.6 21.6 26.6 26.6
SSG Lubrication Required (use turbine oil class 1 ISO VG32 for lubrication)
Allowable Cushioned 63.5 91.5 116 152 233 362
SSD absorbed 0.371 0.386 0.386 0.958 1.08 2.32
Without cushion
energy  J Without any cushion, this product cannot absorb large energy generated by an external load. We recommend using an external shock absorber.

CAT
Stroke
Bore size (mm) Standard stroke (mm) Max. stroke (mm) Min. stroke (mm) Trunnion min. stroke (mm)
MDC2
ø125 23
ø140 800 25
MVC ø160 50/75/100/150/ 27
1 *1: ‌The custom stroke is
ø180 200/250/300 900 28
available in 1 mm
SMG ø200 1000 28 increments.
ø250 1200 28
MSD/
*2: If the max. stroke is exceeded, product specifications may not be met, depending on operating conditions. Contact CKD in this case.
MSDG

FC* Cylinder weight (Unit: kg)

Item/mounting Product weight when stroke (S) = 0 mm Additional weight
STK Basic Axial foot Flange Eye bracket Clevis bracket Trunnion per S =
Bore size (mm)
(00) (LB) (FA/FB) (CA) (CB) (TA/TB/TC) 100mm
ø125 7.22 8.72 10.52 10.22 10.32 10.62 1.54
SRL3
ø140 9.35 11.35 14.75 13.15 13.35 12.55 1.78
ø160 12.35 15.45 19.25 17.35 17.65 18.75 2.22
SRG3 ø180 16.75 21.25 28.75 24.15 24.65 24.85 2.96
ø200 22.78 28.48 36.48 32.28 32.48 34.58 3.54
SRM3 ø250 40.51 48.91 66.41 64.51 59.01 69.21 5.38

Product weight for S = 0 mm stroke··············8.72 kg

SRT3 (Example) Product weight of SCS2-G-LB-125B-300 300
Additional weight for S = 300 mm stroke············1.54 x 100 = 4.62 kg
Product weight···································8.72 + 4.62 = 13.34 kg
MRL2

MRG2 Theoretical thrust table (Unit: N)

Bore size Operating Working pressure MPa
SM‑25 (mm) direction 0.05 0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
Push 6.14x102 1.23x103 1.84x103 2.45x103 3.68x103 4.91x103 6.14x103 7.36x103 8.59x103 9.82x103 1.10x104 1.23x104
ø125
Pull 5.73x102 1.15x103 1.72x103 2.29x103 3.44x103 4.59x103 5.73x103 6.88x103 8.03x103 9.17x103 1.03x104 1.15x104
ShkAbs
Push 7.70x102 1.54x103 2.31x103 3.08x103 4.62x103 6.16x103 7.70x103 9.24x103 1.08x104 1.23x104 1.39x104 1.54x104
ø140
Pull 7.29x102 1.46x103 2.19x103 2.92x103 4.38x103 5.84x103 7.29x103 8.75x103 1.02x104 1.17x104 1.31x104 1.46x104
FJ Push 1.01x103 2.01x103 3.02x103 4.02x103 6.03x103 8.04x103 1.01x104 1.21x104 1.41x104 1.61x104 1.81x104 2.01x104
ø160
Pull 9.42x102 1.88x103 2.83x103 3.77x103 5.65x103 7.54x103 9.42x103 1.13x104 1.32x104 1.51x104 1.70x104 1.88x104
FK Push 1.27x103 2.54x103 3.82x103 5.09x103 7.63x103 1.02x104 1.27x104 1.53x104 1.78x104 2.04x104 2.29x104 2.54x104
ø180
Pull 1.19x103 2.39x103 3.58x103 4.77x103 7.16x103 9.54x103 1.19x104 1.43x104 1.67x104 1.91x104 2.15x104 2.39x104
Spd Push 1.57x103 3.14x103 4.71x103 6.28x103 9.42x103 1.26x104 1.57x104 1.88x104 2.20x104 2.51x104 2.83x104 3.14x104
Contr ø200
Pull 1.47x103 2.95x103 4.42x103 5.89x103 8.84x103 1.18x104 1.47x104 1.77x104 2.06x104 2.36x104 2.65x104 2.95x104
Push 2.45x103 4.91x103 7.36x103 9.82x103 1.47x104 1.96x104 2.45x104 2.95x104 3.44x104 3.93x104 4.42x104 4.91x104
Ending ø250
Pull 2.31x103 4.63x103 6.94x103 9.25x103 1.39x104 1.85x104 2.31x104 2.78x104 3.24x104 3.70x104 4.16x104 4.63x104

668
 SCS2-G Series
How to order
How to order SCP*3
No switch (without magnet for switch)
CMK2
SCS2-G LB 125 B 50 M Y Code Description
A Mounting CMA2
A Mounting 00 Basic
*1 LB Axial foot
FA Rod side flange
SCM
FB Head side flange
CA Eye bracket SCG
CB Clevis bracket (pin and snap ring included)
TC Intermediate trunnion SCA2
TA Rod side trunnion
TB Head side trunnion SCS2
B Bore size (mm)
B Bore size 125 ø125 CKV2
140 ø140
160 ø160 CAV2/
180 ø180 COVP/N2
200 ø200
250 ø250
SSD2
C Port thread
C Port thread SSG
Blank Rc thread
N NPT thread (made-to-order product)
G G thread (made-to-order product) SSD
D Cushion
D Cushion B Both sides cushioned CAT
R Rod side cushioned
H Head side cushioned MDC2
N Without cushion
E Stroke (mm) MVC
E Stroke Bore size Stroke Custom stroke
Precautions for model No. selection ø125 to ø160 1 to 800 SMG
*1: ‌Supporting hole is available custom made for ø125 to ø180 1 to 900 In 1 mm
160 only. Contact CKD for details about dimensions.
ø200 1 to 1000 increments MSD/
*2: T ‌ he instantaneous max. temperature is the temperature when MSDG
sparks, cutting chips, etc., instantaneously contact the bellows.
ø250 1 to 1200
*3: ‌Check the figures below for the cushion needle F Option FC*
position indication. F Option C2 With cushion section check valve
*2 Max. ambient temp. Instantaneous ambient temp
[Example of model No.] STK
J Bellows 100°C 200°C
SCS2-G-LB-125B-50-JY L Bellows 250°C 400°C
Model: Large bore size cylinder, rubber scraper M Piston rod material (stainless steel) SRL3
A Mounting :·Axial foot *3 Blank Cushion needle position (standard) Standard
B Bore size :·ø125 mm R Cushion needle position R SRG3
T R
C Port thread :·Rc thread S Cushion needle position S
D Cushion :·Both sides cushioned T Cushion needle position T S SRM3
E Stroke :·50 mm P6 Copper and PTFE free (made to order)
F Option :·Bellows material for max. ambient temperature 100°C SRT3
G Accessory
G Accessory :·Rod clevis G Accessory I Rod eye
Y Rod clevis (pin and snap ring included) MRL2
B1 Eye bracket
Cushion needle position B2 Clevis bracket (pin and snap ring included)
MRG2
(Needle position with the port on the top when viewed from the rod end)
SM‑25
Standard Certified class 2 pressure
Port
vessel stroke ShkAbs
Bore size Stroke
ø200 946 or more FJ
T R
ø250 752 or more
FK
S
Spd
Contr

Ending

669
 SCS2-G Series
SCP*3
Internal structure and parts list
Standard
CMK2 SCS2-G

CMA2
21 19 20 11 12 13 14 15 16 17 22 23

SCM

SCG
18
18
SCA2

SCS2

CKV2
CAV2/
COVP/N2
1 2 3 4 5 6 7 8 9 10 For ø250
SSD2

SSG

SSD
Note: 14 , 19 , 20 and 21 are not required for the type without cushion.

CAT No. Part name Material Remarks No. Part name Material Remarks
1 Hexagon nut Steel Zinc chromate 13 Cylinder gasket Nitrile rubber
2 Bush Iron-copper oil-impregnated bearing alloy 14 Cushion packing Nitrile rubber/steel
MDC2
3 Rod cover Aluminum alloy casting Chromate 15 Cylinder tube Aluminum alloy Hard alumite

MVC 4 Tie rod Steel Zinc chromate 16 Piston packing Nitrile rubber
5 Piston rod Steel Industrial chrome plating 17 Wear ring Polyacetal resin

SMG 6 Cushion ring A Steel Zinc chromate 18 Cushion ring B Steel Zinc chromate
7 Piston gasket Nitrile rubber Copper alloy (ø125 to ø180)
MSD/ 19 Cushion needle
8 Piston Aluminum alloy casting Steel (ø200, 250) Zinc chromate
MSDG
9 Head cover Aluminum alloy casting Chromate 20 Hexagon nut Steel Zinc chromate

FC* 10 Hexagon nut Steel Zinc chromate 21 Needle gasket Nitrile rubber
11 Dust wiper Nitrile rubber/steel 22 Hexagon socket head cap screw Steel (black finish) ø250 only
STK 12 Rod packing Nitrile rubber 23 Retainer plate Steel (Manganese phosphate) ø250 only

SRL3
Repair parts list
SRG3 Bore size (mm) Kit No. Repair parts No.
ø125 SCS2-G-125K
SRM3 ø140 SCS2-G-140K
ø160 SCS2-G-160K
11 12 13 14 16 17 21
SRT3 ø180 SCS2-G-180K
ø200 SCS2-G-200K
MRL2 ø250 SCS2-G-250K

MRG2

SM‑25

ShkAbs Dimensions
FJ Same as double acting/standard single rod SCS2. Refer to pages 630 to 638.
However, because the dust wiper protrudes, the MN dimension of ø125 and ø140 is 2 mm shorter.
FK
Spd
Contr

Ending

670
 Pneumatic components

Safety Precautions
Be sure to read this section before use. SCP*3
Refer to Intro Page 73 for general information of the cylinder, and to Intro Page 80 for general information of the cylinder switch.
CMK2

Product-specific cautions: Large bore size cylinder: SCS2 Series CMA2

Design/selection SCM

SCG
1. Common
SCA2
CAUTION
Certification of class 2 pressure vessel With cushion section check valve (C2) SCS2
According to regulations of the Ministry of Health, Labour and Welfare, the The larger the load, the greater the delay in the starting time
following cylinders should be certified by the Japan Boilers Association. of the cylinder will be. To shorten the starting time, use the CKV2
(1) ‌Cylinders with a rated pressure exceeding 0.2 MPa and cushion section check valve (C2).
CAV2/
cylinder capacity exceeding 0.04 m3. COVP/N2
(2) C ‌ ylinders with a rated pressure exceeding 0.2 MPa, bore size Heat resistant (SCS2-T)
exceeding 200 mm and stroke exceeding 1000 mm. Consult CKD if the ambient temperatures of different SSD2
components vary drastically, such as when only the piston
V: Cylinder capacity (m3) SSG
D2xSx3.14 rod is inserted into a high temperature furnace.
V= D: Bore size (mm)
4x109
S: ‌Body length (cylinder tube SSD
length) (mm)
CAT
Mounting, installation and adjustment
MDC2

1. Stroke adjustable SCS2-P 2. Heat resistant SCS2-T MVC

CAUTION CAUTION SMG

If the stroke is adjusted, the cushion cannot Magnet is not built in. MSD/
function. MSDG

FC*
3. Low hydraulic SCS2-H
STK
CAUTION
T
 his product is a pneumatic cylinder which enables SRL3
the use of hydraulic fluid as its working fluid.
Not compliant with JIS standards on activation and SRG3
leak inspection for hydraulic cylinders.
SRM3

SRT3

MRL2

MRG2

SM‑25

ShkAbs

FJ

FK
Spd
Contr

Ending

671