ISO cylinder DSNU-25- -
Part number: 193991
Data sheet
Feature Value
Stroke 1 mm...500 mm
Piston diameter 25 mm
Cushioning Elastic cushioning rings/plates at both ends
Self-adjusting pneumatic end-position cushioning
Pneumatic cushioning, adjustable at both ends
Mounting position optional
Conforms to standard CETOP RP 52 P
ISO 6432
Design Piston
Piston rod
Cylinder barrel
Position detection Via proximity switch
Variants Increased chemical resistance
Extended male piston rod thread
Piston rod with female thread
Custom thread on the piston rod
Piston rod with male thread shortened at one end
Extended piston rod
Clamping unit on the piston rod
Axial supply port
With direct mounting
Lateral supply port
With protection against rotation
High corrosion protection
Uniform, slow movement
Low friction
Through piston rod
Heat-resistant seals max. 120°C
Piston rod at one end
Protection against torque/guide Square piston rod
Operating pressure 0.1 MPa...1 MPa
1 bar...10 bar
Mode of operation Double-acting
CE mark (see declaration of conformity) To EU Explosion Protection Directive (ATEX)
CE marking (see declaration of conformity) To UK EX instructions
Explosion protection certification outside the EU EPL Db (GB)
EPL Gb (GB)
Feb 3, 2024 – Subject to change - Festo SE & Co. KG
Feature Value
Explosion protection Zone 1 (ATEX)
Zone 1 (UKEX)
Zone 2 (ATEX)
Zone 21 (ATEX)
Zone 21 (UKEX)
Zone 22 (ATEX)
ATEX category gas II 2G
ATEX category dust II 2D
Explosion ignition protection type for gas Ex h IIC T4 Gb
Explosion ignition protection type for dust Ex h IIIC T120°C Db
Explosion ambient temperature -20°C <= Ta <= +60°C
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will
always be required)
Corrosion resistance class CRC 2 - Moderate corrosion stress
3 - high corrosion stress
LABS (PWIS) conformity VDMA24364-B1/B2-L
VDMA24364 zone III
Ambient temperature -20 °C...120 °C
Impact energy in end positions 0.3 J
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke 247 N...295 N
Type of mounting With accessories
Pneumatic connection G1/8
Note on materials RoHS-compliant
Material cover Wrought aluminium alloy
Material seals NBR
TPE-U(PU)
Material piston rod High-alloy stainless steel
Material cylinder barrel High-alloy stainless steel
Feb 3, 2024 – Subject to change - Festo SE & Co. KG
