Scribd
Upload
23 views7 pages

Imp Qs

Uploaded by

Sumit Debnath
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
23 views7 pages

Imp Qs

Uploaded by

Sumit Debnath
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 7

1.

Feedback can cause a system that is originally stable to become___________


a) Non responsive
b) Unstable
c) Conditionally stable
d) Either more stable or unstable

2. The closed system has higher ________ than open loop control system, this implies increased
speed of response.
a) Gain
b) Bandwidth
c) Frequency
d) Speed

3. The output of a feedback control system must be a function of


a) Reference and output
b) Reference and input
c) Input and feedback signal
d) Output and feedback signal

4. Zero initial condition for a system means


a) Input reference signal is zero
b) Zero stored energy
c) Initial movement of moving parts
d) System is at rest and no energy is stored in any of its components

5. The overall transfer function from block diagram reduction for cascaded blocks is :
a) Sum of individual gain
b) Product of individual gain
c) Difference of individual gain
d) Division of individual gain

6. Loop which do not possess any common node are said to be ___________ loops.
a) Forward gain
b) Touching loops
c) Non touching loops
d) Feedback gain

7. The relationship between an input and output variable of a signal flow graph is given by the net
gain between the input and output node is known as the overall______________
a) gain of the system
b) Stability
c) Bandwidth
d) Speed

8. Laplace transform of unit impulse signal is :


a) A/s
b) A
c) 1 (for step function : 1/s)
d) 1/s
9. Step signal is the signal whose values is :
a) 1 for all values greater than zero
b) Indeterminate at zero
c) It is zero for time less than zero
d) All of the mentioned

10. A linear time invariant system is stable if :


a) System in excited by the bounded input, the output is also bounded
b) In the absence of input output tends zero
c) Both a and b
d) System in excited by the bounded input, the output is not bounded

11. Routh Hurwitz criterion cannot be applied when the characteristic equation of the system
containing coefficient’s which is/are
a) Exponential function of s
b) Sinusoidal function of s
c) Complex
d) Exponential and sinusoidal function of s and complex

12. Number of roots of characteristic equation is equal to the number of ______________


a) Branches
b) Root
c) Stem
d) Poles

13. Which of the following statements are correct?


a) Root locus is for the negative feedback systems
b) Complementary root locus is for the positive feedback systems
c) Root locus is for the negative feedback and Complementary root locus is for the positive
feedback systems
d) Complementary root locus is for the negative feedback systems

14. If the gain of the open loop system is doubled, the gain of the system is :
a) Not affected
b) Doubled
c) Halved
d) One fourth of the original value

15. The system with the open loop transfer function 1/s(1+s) is:
a) Type 2 and order 1
b) Type 1 and order 1
c) Type 0 and order 0
d) Type 1 and order 2

16. Multiple signals as input can be used in which systems:


a) Feedback systems
b) Non feedback systems
c) Feedforward systems
d) None of the mentioned
17. Effect of feedback on sensitivity is minimum in:
a) Open loop control system
b) Closed loop control system
c) None of the mentioned
d) Both of the mentioned

18. Transfer function of a system is used to calculate which of the following?


a) The order of the system
b) The time constant
c) The output for any given input
d) The steady state gain

19. On which of the following factors does the sensitivity of a closed loop system to gain changes
and load disturbances depend?
a) Frequency
b) Loop gain
c) Forward gain
d) All of the mentioned

20. The overall transfer function of two blocks in parallel are :


a) Sum of individual gain
b) Product of individual gain
c) Difference of individual gain
d) Division of individual gain

21. Signal flow graphs:


a) They apply to linear systems
b) The equation obtained may or may not be in the form of cause or effect
c) Arrows are not important in the graph
d) They cannot be converted back to block diagram

22. A node having only outgoing branches.


a) Input node
b) Output node
c) Incoming node
d) Outgoing node

23. Laplace transform of unit step signal is :


a) A/s
b) A
c) 1
d) 1/s

24. Ramp input :


a) Denotes constant velocity
b) Value increases linearly with time
c) It denotes constant velocity and varies linearly with time
d) It varies exponentially with time

25. Asymptotic stability is concerned with:


a) A system under influence of input
b) A system not under influence of input
c) A system under influence of output
d) A system not under influence of output

26. Consider the following statement regarding Routh Hurwitz criterion:


a) It gives absolute stability
b) It gives gain and phase margin
c) It gives the number of roots lying in RHS of the s-plane
d) It gives gain, phase margin and number of roots lying in RHS of the s-plane

27. Consider the following statements regarding root loci:


a) All root loci start from the respective poles of G(s) H(s)
b) All root loci end at the respective zeros of G(s) H(s) or go to infinity
c) The root loci are symmetrical about the imaginary axis of the s-plane
d) All root loci start and end from the respective poles of G(s) H(s) or go to infinity

28. Root locus is used to calculate:


a) Marginal stability
b) Absolute stability
c) Conditional stability
d) Relative stability

29. Which one of the following statements is correct?


Nichol’s chart is useful for the detailed study of:
a) Closed loop frequency response
b) Open loop frequency response
c) Close loop and open loop frequency responses
d) None of the mentioned

30. In an automatic control system which of the following elements is not used?
a) Error detector
b) Final control element
c) Sensor
d) Oscillator

31. A linear system at rest is subject to an input signal r(t)=1-e-t. The response of the system for t>0 is
given by c(t)=1-e-2t. Find out the transfer function of the system.
32. Calculate the value of G if the systems shown in the given figure produce same outcome.
33. Use mason’s gain formula to find the transfer function of the given signal flow graph:

34. The impulse response of an initially relaxed system ise−2 t u(t). Find the input which can produce
−2 t
te u(t).
35. For a unity feedback system G=5. If the % change in G is 20% then find out the overall change in
C/R in percentage.
36. Find out the nodal equations from the given graph:

37. For a type 1 and order 1 system if G= 1/ST, then calculate the unit step response of that system.
38. Given C(s)/R(s)= 1/( S3 +2 S 2 +2 S+ 1¿ . Check the system stability.
39. For the block diagram given in the following figure, find out the expression of C/R.

40. A linear system at rest is subject to an input signal r(t)=u(t). The response of the system for t>0 is
given by c(t)=1-e-2t. Find out the transfer function of the system is.
18. Use mason’s gain formula to calculate the transfer function of given figure:

41. Find out the transfer function.

42. Find out the nodal equations from the given graph:
43. For a unity feedback system G = 10. If % change of G is 10% then find out the % change in C/R.
44. For a type 1 and order 1 system if G= 1/ST, then calculate the unit impulse response of that
system.
45. Given G(s)H(s)= 1/(S+1). Draw the polar plot.
46. A control system whose step response is -0.5(1 + e-2t) is cascaded to another control block whose
impulse response is e-t. What is the transfer function of the cascaded combination?(chatgpt)

47. Consider the block diagram shown below:

If the transfer function of the system is given by T(s)=G1G2+G2G3/1+X. Then find the value of X.

48. If G(s)H(s)= 1/(S+1)(S+2)(S+3), then find out the Nyquist plot.

49. Given G(s)H(s)= 100/S2 . Show the bode plot and calculate the slope and the intersecting points
on the axis.

50. Given G(s)= k/S(S+4)(S2+2s+2) and feedback is unity. Plot the root locus.

51. If C(s)/R(s) = 4/(S2+101S+100) then calculate the time constant and settling time on the basis of
2% and 5% of steady state error.

52. The pole-zero plot is given and the DC value of the gain is 20units. Find out the transfer function.
53. Sketch the root locus of a system whose open loop Transfer function is G(s)=k/S(S+2)(S+4).

54. C(s)/R(s)= 4/(S2+4s+2). Find out the type of response and also calculate the time constant.

55. Draw and Explain different types of response of systems.

56. If G(s)=K/(S3+2S2+1) and feedback is unity then check the values of K where the system will be
stable.

57. Given G(s)H(s)= 4S2. Sketch the Bode plot.

You might also like