( ISO 9001 : 2008 CERTIFIED COMPANY )
SAM GAS PROJECTS is ISO 9001:2008 certified, Professionally Managed Engineering
Organization, Specialized in Design , Manufacture , Supply & commissioning of ‘State of the Art’
Nitrogen, Oxygen, Hydrogen Gas Plants, Ammonia Crackers, Gas Purification Systems, Compressed
Air Dryers and Gas storage systems.
SAM GAS PROJECTS has supplied more than 550 Systems, which are working satisfactorily all
over India & across the Globe in more than 40 countries.
RANGE OF PRODUCTS :
Nitrogen Gas Plants – PSA Based Compressed Air Dryers
Oxygen Gas Plants Heat of Compression Type
PSA Based Internally Heat Re-activated type
No Purge Loss, Split flow Type
VPSA Based
Blower Re-activated type
Hydrogen Gas Plants
Heatless Type
Ammonia Cracker Based
Gas Purifications Systems.
Water Electrolysis Based
Ammonia Storage Systems.
Ammonia Cracker Units
Exo / Endo Gas Generators
Electrically Heated Type
Allied Equipments for Air & Gas.
Gas Fired Type
2
NITROGEN PRODUCTION PROCESS:
PSA Nitrogen Generators are based on well
proven technology using Carbon Molecular
Sieves (CMS). CMS is an adsorbent having
infinite number of small pores. When CMS is
used in the PSA process, an oxygen Molecules,
having a smaller diameter than a Nitrogen
Molecule, passes through the pores and is
finally adsorbed. Therefore, the Nitrogen is
recovered to a high degree while almost all the
Oxygen is adsorbed. Adsorption of Oxygen
Molecules happens at particular pressure. In
case of higher or lower pressure performance
of carbon molecular sieve varies. During
regeneration process , as soon as PSA tower
pressure brought down to atmospheric
conditions , oxygen molecules comes out of
pores of carbon molecular sieve. It is important
to note that CMS performance varies with
temperature. While design of PSA based
Nitrogen Plants based on Indian operating
conditions i.e. operating temperature as 40°C &
for this necessary correction factors are being
applied while designing the Nitrogen gas plant.
In PSA based nitrogen gas plants separation of
Nitrogen is being done by physical means.
3
NITROGEN GAS PLANT - MODELS :
MS MODEL DX MODEL CU-DX MODEL LAB SACLE
Capacity 1 to 2000 NM³/Hr. 1 to 2000 NM³/Hr. 1 to 2000 NM³/Hr. 5 to 100 LPM
Composition :
Oxygen 0.01% to 5.0% 1.0 to 3.0 PPM 1.0 PPM 5.0% to 10 PPM
Hydrogen Nil 0.5% or Higher Nil Nil
Nitrogen + Others 95% to 99.99% Balance 99.9999% 95% to 99.999%
Dew Point (-) 40°C or better (-) 60°C or better (-) 60°C or better (-) 40°C or better
Pressure 5.0 Barg or Higher 5.0 Barg or Higher 5.0 Barg or Higher 5.0 Barg or Higher
FLOW DIAGRAM FOR NITROGEN GAS PLANT
4
APPLICATIONS :
Metallurgical Industry ( CRCA / Cable Industry
Galvanizing ) Petrochemical
Pharmaceuticals Industry Biodiesel Plants
Chemical Industry Food & beverage
Pesticide Industry Lamp manufacturing
Electronics Industry T.V. Picture tubes Manufacturing
Tyre manufacturing Edible oil
Fertilizer Units Glass Manufacturing
Textile / fiber / POY / PFY Units Cold Storages
Laser Cutting Applications
ADVANTAGES OF NITROGEN GAS PLANTS :
On Site Nitrogen Generation. Automatic operation , no manual intervention.
Easy to Operate & Maintain . Low generation cost.
High Reliability Payback Period less than a year .
On line Control on Nitrogen quality No dependency on external Agencies .
5
OUR GLOBAL PRESENCE
SAM GAS PROJECTS PVT. LTD.
( ISO 9001 : 2008 CERTIFIED COMPANY )
E – 30, UDYOG KUNJ, UPSIDC INDUSTRIAL AREA, NH – 24, GHAZIABAD ( U.P.), INDIA, PHONE : +91-120–6403740 – 44,
E - MAIL :
[email protected] /
[email protected] , WEB SITE : www.samgasindia.com / www.psa-nitrogen.com
