HT-128

HANDHELD WIRING
ANALYZER
How it Works
DIT-MCO's HT-128 distributed cable test system
allows you to connect individual testers to each wire
harness branch connector rather than relying on a
single, centralized tester and multiple return adapter
cables. This distributed approach uses small, battery
operated testers wirelessly linked together to achieve
the desired wire harness test coverage.
The HT-128 requires minimal training. Simply connect
each tester to its corresponding harness connector
using snap-in adapters, choose one unit to act as the
host, retrieve a previously stored wirelist, link the HT-
128's together and begin testing. It performs
continuity and resistance diagnostics for each wire in
the harness. Faults such as opens, shorts, crossed
wires or high resistance are reported to the user
within seconds. The optional TOR feature allows you
Simplify your wire harness testing. The DIT-MCO to trace faults to a specific location within the wire
HT-128 provides a superior solution for point-to- harness bundle. Wire I.D. with probe allows you to
point continuity analysis. These lightweight, use the units for guided harness assembly.
handheld units can serve your diagnostic needs
Features
from product develop­ment and benchtop
testing through field support and maintenance. Compact, Lightweight, Portable
Simple, Easy to use
Menu driven touchscreen display
Benefits Rugged handheld units
Test installed cables without shorting plugs or long Accurate testing
loop-back adapter cables Expandable, wireless
More than continuity- Test for opens, shorts, crossed Li-ion Battery operated
wires and high resistance connections USB port
Verify passive components (resistors, diodes) Interchangeable adapters
Cost effective/Flexible to meet your needs Save test results
Save time/Save money. Eliminate hours wasted on Print reports
hand-beeping and troubleshooting
Document test results

For all cable testing, harness testing, and other 5612 Brighton Terrace, Kansas City, MO 64130-4530
(800) 821-3487 • (816) 444-9700 • Fax (816) 444-9737
automated wiring product testing, rely on DIT-
Email [email protected] • www.ditmco.com
MCO wiring analyzers.
SPECIFICATIONS
Technical Specifications For more information
For the name of your representative or more
129 Total: 128 from rear connector + 1 front red Banana Jack
Test Points
(expandable up to 8 units, 1032 points) information on:
Test Current/Voltage 6mA max/ 3.3V DC technical specifications
Voltage Measurements 0 to 3.3V DC± 10%
pricing
services
Continuity Threshold .5 to 10KΩ ± 2% ± 0.2Ω
other products
Resistor Measurements .5 to 10KΩ ± 2% ± 0.2Ω authorized sales and service agents
I.R. Threshold 50KΩ to 200KΩ ± 15% Please contact:
Wireless Range
Typically, 150’ (915Mhz Low Power FSK modulation transceiver for DIT-MCO International
USA) (868Mhz Low Power FSK modulation for EU)
5612 Brighton Terrace
Battery
Rechargeable Li-ion (Typical usage 10-hours between charges. Can Kansas City, MO 64130-4530
be charged via AC adapter or through USB port.)
(800) 821-3487 • (816) 444-9700
Operating Temperature Range 0° to 70° C
Fax (816) 444-9737
Email [email protected]
Learn More About the HT-128 www.ditmco.com

In Europe
Tel (44) 1482 662355

2024 DIT-MCO International Corporation

All brands and products are registered trademarks of the
respective holders.
All rights reserved. Specification are subject to change. EOE.