Antonov An-225
LY
N
O
EL
Mriya - 1:200
D
O
M
3D
CLERX
VIEW IN BROWSER
updated 3. 9. 2023 | published 3. 9. 2023
Summary
Printable model of the Antonov An-225 Mriya
Toys & Games > Vehicles
Tags: plane aircraft jet airplane ukraine 225 antonov
mriya an225 clerx
This model is free, please donate to one of Ukraine's relief efforts instead:
https://donate.redcrossredcrescent.org/ua/donate/~my-donation?_cv=1
https://news.un.org/en/focus/ukraine/donate
https://www.comebackalive.in.ua/
Model description
The Antonov An-225 Mriya (‘Dream’ in Ukrainian) was the largest and
heaviest cargo aircraft in the world. The aircraft was an engineering
marvel, able to transport up to 250 tonnes of cargo, including single pieces
weighing up to 200 tonnes.
During its operation, the An-225 was used to transport a variety of
equipment including wind turbine blades, generators, trains and even
other aircraft.
The Mriya attracted a high degree of public interest, attaining a global
following due to its size and its uniqueness. People frequently visited
airports to see its scheduled arrivals and departures.
The only completed An-225 was destroyed in the Battle of Antonov Airport
during the 2022 Russian invasion of Ukraine.
Model dimensions
• Length: 42 cm
• Wingspan: 44 cm
Print settings
• Layer height: 0,2mm
• Outer walls: 2
• Bottom layers: 3
• Top layers: 5
• Infill: 0% (except for the stand: 25%)
• No supports
• Minimum layer time: 5 sec
• Perimeter generator: classic (not arachne)
Minimum required print volume is 77x102x210mm.
A version of the stabilizers and wings without the built-in supports is
included in the ‘additional content’ folder.
For printers with a Z height of 222mm or more, it is suggested to use the
‘one piece’ version of the wings which can also be found in the ‘additional
content’ folder.
Please use the following link if you have questions or issues related to this
model: https://discord.gg/Gyp4Hd5S6n
Support
If you like my models, you can support my work in the following ways:
• Make a donation or buy something from my shop: https://ko-fi.com/
clerx
• Become a member of the Clerx Discord community: https://
discord.gg/hckHHs3waH
Model files
An-225 19 files
fuselage-fwd.stl
fuselage-aft.stl
stabilizer-left.stl
stabilizer-right.stl
wing-left.stl
wing-right.stl
fan-blades.stl
engine-1.stl
engine-2.stl
engine-3.stl
engine-4.stl
engine-5.stl
engine-6.stl
stabilizer-connectors.stl
wing-connector.stl
fuselage-pin.stl
stand.stl
wing-tip-right.stl
wing-tip-left.stl
Additional Content 8 files
stabilizer-left-no-support.stl
stabilizer-right-no-support.stl
wing-left-no-support.stl
wing-right-no-support.stl
wing-one-piece-left.stl
wing-one-piece-right.stl
wing-one-piece-left-no-support.stl
wing-one-piece-right-no-support.stl
Other files
model-overview.pdf
License
This work is licensed under a
Creative Commons (4.0 International License)
Attribution—Noncommercial—No Derivatives
✖ | Sharing without ATTRIBUTION
✖ | Remix Culture allowed
✖ | Commercial Use
✖ | Free Cultural Works
✖ | Meets Open Definition
