8"

3 221" 3" 221"

10" 4"

2"

2"
4"
3

5"

5"
921"
19"

19"
5"

5"
1 1

921"
5"

5"
2"

2"
4" 4"

2 2
2
RDE -RFI -076

For SMAW, GMAW and FCAW Welds 45° Typ

(w)
For SAW Welds 60°

Typ
w
NOTE:
1. PLATES ASTM A992 WITH A MINIMUM YIELD STRENGTH OF 50 ksi.
2. HEADED STUDS TO BE MANUFACTURED BY NELSON OR APPROVED ALTERNATIVE. SHALL BE MILD STEEL
CONFORMING TO ASTM A108 GRADE 1010 THROUGH 1020 MECHANICAL PROPERTIES SHALL BE IN Fillet weld deformed bar Alternative detail Pjp weld
ACCORDANCE WITH AWS D1.1.
3. DEFORMED BAR ANCHORS: SHALL BE NELSON, FLUX FILLED DEFORMED BAR ANCHORS, TYPE D2L OR The welds should develope the bar/stud in tension.
APPROVED ALTERNATIVE.
Ø Fillet weld Pjp weld
4. DEFORMED BARS END ANCHORS: SHALL BE LENTON TERMINATORS D6 OR D16 OR APPROVED ALTERNATIVE. inch w (w)
5. HEADED STUDS AND DEFORMED BARS ANCHORS TO BE WELDED AS PER MANUFACTURER SPECIFICATIONS.
7 7
Deformed bar 0.75 16 16

9 9
Deformed bar #8 1.0 16 16

11 11
Deformed bar #10 1.25 16 16

3
Nelson stud 0.75 8 -
1
Nelson stud 1.0 2