Scribd
Upload
44 views1 page

11SMN30 - 11SMn30-Nr 1 0715-ENG

Uploaded by

Irfan Fatahilah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
44 views1 page

11SMN30 - 11SMn30-Nr 1 0715-ENG

Uploaded by

Irfan Fatahilah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

FREE-CUTTING

11SMn30 - Nr. 1.0715 STEELS

STANDARD REFERENCE:
EN ISO 683-4: 2018 (Hot-rolled products) | EN 10277: 2018 (Bright products)

RODACCIAI REFERENCES AND COMPARABLE STANDARDS


EUROPE ITALY GERMANY FRANCE UK USA
EN 10087: 1998
(UNI 4838-80) (DIN 1651-88) (NF A 35-561-92) (BS 970 pt.3-91) ASTM A 29
EN 10277-3: 2008

Grade N° Werkstoff N°
11SMn30 1.0715 CF 9 SMn 28 9SMn28 1.0715 S 250 230M07 -

CHEMICAL COMPOSITION (CAST ANALYSIS) (%)


C / max Si / max Mn P / max S
0,14 0,05 0,90÷1,30 0,11 0,27÷0,33

MECHANICAL PROPERTIES OF BRIGHT STEEL


Size as Rolled and/or as Rolled + Turned (+SH) Cold Drawn (+C)
mm Hardness HB max Rm (MPa) Rp0,2 (MPa) min Rm (MPa) A5 (%) min
≥5 ≤10 - - 440 510÷810 6
>10 ≤16 - - 410 490÷760 7
>16 ≤40 169 380÷570 375 460÷710 8
>40 ≤63 169 370÷570 305 400÷650 9
>63 ≤100 154 360÷520 245 360÷630 9
For size <5 mm the mechanical properties may be agreed at the time of enquiry and order

WORKING TEMPERATURES RECOMMENDED


Hot forgings
Operation Normalizing Soft annealing
deformation
°C 950÷1250 870÷910 650÷700
rev. 10/2018

Mark Rodacciai Download APP

FREE-CUTTING STEELS
11SMN30
NOT INTENDED FOR HEAT TREATMENT

You might also like