INVERTERS
Three Phase Inverter
with Synergy Technology
For the 400/480V Grid for India
SE66.6K / SE90K / SE100K / SE120K
12-20
YEAR
WARRANTY
Powered by unique pre-commissioning process for rapid system installation
Pre-commissioning feature for automated Built-in PID mitigation for maximized system
validation of system components and wiring performance
during the site installation process and prior to
grid connection Monitored* and field-replaceable surge
protection devices, to better withstand surges
Easy 2-person installation with lightweight, caused by lightning or other events: integrated
modular design (each inverter consists of 2 or RS485 and Type 2 DC SPDs, optional Type 2
3 Synergy Units and one Synergy Manager) AC SPD
Independent operation of each Synergy Unit Optional integrated DC safety switch
enables higher uptime and easy serviceability eliminates the need for external DC isolators
Built-in thermal sensors detect faulty wiring Built-in module-level monitoring with Ethernet
ensuring enhanced protection and safety or cellular communication for full system
visibility
Built-in arc fault protection and optional rapid
shutdown
*Applicable only for DC and AC SPDs
solaredge.com
Three Phase Inverter with Synergy Technology
For the 400/480V Grid for India
SE66.6K / SE90K / SE100K / SE120K
Applicable to inverter with part number SExxK-xxxxIxxxx SExxK-xxx8Ixxxx
SE66.6K SE90K SE100K SE120K
for 400V Grid for 400V Grid for 400V Grid for 480V Grid UNIT
OUTPUT
Rated AC Active Output Power(1) 66600 90000 100000 120000 W
Maximum AC Apparent Output Power(1) 66600 90000 100000 120000 VA
AC Output Voltage – Line to Line / Line to Neutral (Nominal) 400 / 230 480 / 277 Vac
AC Output Voltage – Line to Line Range / Line to Neutral Range 320 – 478 / 184 – 276 432 – 529 / 249 – 305 Vac
AC Frequency 50/60 ± 5% Hz
Maximum Continuous Output Current (per Phase) 96.5 130.5 145 145 Aac
AC Output Line Connections 3W + PE, 4W + PE
Supported Grids WYE: TN-C, TN-S, TN-C-S, TT, IT; Delta: IT
Maximum Residual Current Injection(2) 200 300 mA
Utility Monitoring, Islanding Protection, Configurable Power
Yes
Factor, Country Configurable Thresholds
Total Harmonic Distortion ≤3 %
Power Factor Range +/-0.8 to 1
INPUT
Maximum DC Power (Module STC) Inverter / Synergy Unit 116550 / 58275 157500 / 52500 175000 / 58300 210000 / 70000 W
Transformer-less, Ungrounded Yes
Maximum Input Voltage DC+ to DC- 1000 Vdc
Operating Voltage Range 680 – 1000 Vdc
Maximum Input Current 2 x 48.25 3 x 43.5 3 x 48.25 Adc
Reverse-Polarity Protection Yes
Ground-Fault Isolation Detection 167kΩ Sensitivity per Synergy Unit(3)
Maximum Inverter Efficiency 98.3 98.1 %
European Weighted Efficiency 98 %
Night Time Power Consumption <8 < 12 W
ADDITIONAL FEATURES
Supported Communication Interfaces(4) 2 x RS485, Ethernet, Wi-Fi(5)
Smart Energy Management Export Limitation
Inverter Commissioning With the SetApp mobile application using built-in Wi-Fi access point for local connection
Arc Fault Protection Built-in, user configurable (according to UL1699B)
Rapid Shutdown Optional (automatic upon AC Grid Disconnect)
PID Rectifier Night time, built-in
RS485 Surge Protection (ports 1+2) Type II, field replaceable, integrated
DC Surge Protection Type II, field replaceable, integrated
AC Surge Protection Type II, field replaceable, optional
DC Fuses (Single Pole) 25A, optional
DC Disconnect Switch Optional
Pre-commissioning Built-in(6)
STANDARD COMPLIANCE
Safety IEC-62109-1, IEC-62109-2
VDE-AR-N-4105, AS-4777, EN 50549-1, EN 50549-2, CEI-021, VDE 0126-1-1,
Grid Connection Standards (7)
CEI-016, IEC61727, IEC62116
Other BIS, IEC61683, IEC61000-1, IEC61000-2, IEC61000-14, IEC61000-30, IEC60529
Emissions IEC61000-6-2, IEC61000-6-3 Class A, IEC61000-3-11, IEC61000-3-12
RoHS Yes
(1) Maximum values at 400V / 230V.
(2) If an external RCD is required, its trip value must be ≥ 200mA for SE66.6K; ≥ 300mA for SE90K/SE100K/SE120K.
(3) Where permitted by local regulations.
(4) For specifications of the optional communication options, visit https://www.solaredge.com/products/communication or the Resource Library webpage:
https://www.solaredge.com/resource-library, to download the relevant product datasheet.
(5) Wi-Fi connectivity requires an external antenna. For more information refer to: https://www.solaredge.com/sites/default/files/se-wifi-zigbee-antenna-datasheet.pdf.
(6) Not available for P/Ns SEXXK-XXXXBPXX.
(7) For all standards and certificates download, refer to the Certifications category on the Resource Library webpage: https://www.solaredge.com/resource-library.
Three Phase Inverter with Synergy Technology
For the 400/480V Grid for India
SE66.6K / SE90K / SE100K / SE120K
Applicable to inverter with part number SExxK-xxxxIxxxx SExxK-xxx8Ixxxx
SE66.6K SE90K SE100K SE120K
for 400V Grid for 400V Grid for 400V Grid for 480V Grid UNIT
INSTALLATION SPECIFICATIONS
Number of Synergy Units per Inverter 2 3
AC Wire Cross Section and Outer Diameter: Line/PE
Cross section up to 120 / 70 mm ; outer diameter 30 – 50 / 12 – 20 mm
2
(Aluminum or Copper)
DC Input: Inverter / Synergy Unit (8)
8 / 4 MC4 pairs 12 / 4 MC4 pairs
Synergy Unit: 558 x 328 x 273
Dimensions (H x W x D) mm
Synergy Manager: 360 x 560 x 295
Synergy Unit: 32
Weight kg
Synergy Manager: 18
Operating Temperature Range -40 to +60 (9)
˚C
Cooling Fan (user replaceable)
Noise < 67 dBA
Protection Rating IP65 – outdoor and indoor
Mounting Brackets provided
(8) Only MC4 connectors manufactured by Staubli are approved for use.
(9) For power de-rating information refer to: https://www.solaredge.com/sites/default/files/se-temperature-derating-note.pdf.
Accessories (purchased separately)
Accessory P/N
AC SPD kit for Synergy Manager (5 units per box) SE-AC-SPD-SM
Antenna for Wi-Fi and ZigBee Wireless Communications SE-ANT-ZB-WIFI-03
SolarEdge is a global leader in smart energy technology.
By leveraging world-class engineering capabilities and with
a relentless focus on innovation, SolarEdge creates smart
energy solutions that power our lives and drive future
progress.
SolarEdge developed an intelligent inverter solution that
changed the way power is harvested and managed in
photovoltaic (PV) systems. The SolarEdge DC optimized
inverter maximizes power generation while lowering the
cost of energy produced by the PV system.
Continuing to advance smart energy, SolarEdge addresses
a broad range of energy market segments through its PV,
storage, EV charging, UPS, and grid services solutions.
SolarEdge
@SolarEdgePV
@SolarEdgePV
SolarEdgePV
SolarEdge
www.solaredge.com/corporate/contact
solaredge.com
© SolarEdge Technologies, Ltd. All rights reserved.
SOLAREDGE, the SolarEdge logo, OPTIMIZED BY
SOLAREDGE are trademarks or registered trademarks
of SolarEdge Technologies, Inc. All other trademarks
mentioned herein are trademarks of their respective
owners. Date: September 19, 2022 DS-000019-IND
Subject to change without notice.
Cautionary Note Regarding Market Data and
Industry Forecasts: This brochure may contain
market data and industry forecasts from
certain third-party sources. This information
is based on industry surveys and the
preparer’s expertise in the industry and
there can be no assurance that any such
market data is accurate or that any such
industry forecasts will be achieved.
Although we have not independently
verified the accuracy of such market
data and industry forecasts, we
believe that the market data is
reliable and that the industry
forecasts are reasonable.
solaredge.com
