38058-AS Mitsubishi Sensia Brochure • Open Size: 420mm(w) x 297mm(h) • Close Size: 210mm(w) x 297mm(h)

2018 by MLAP. All Rights Reserved. All registered trademarks

are the property of their respective owners. Printed in Singapore.

FMIT0142-01 (03-18)
38058-AS Mitsubishi Sensia Brochure • Open Size: 420mm(w) x 297mm(h) • Close Size: 210mm(w) x 297mm(h)
38058-AS Mitsubishi Sensia Brochure • Open Size: 420mm(w) x 297mm(h) • Close Size: 210mm(w) x 297mm(h)
38058-AS Mitsubishi Sensia Brochure • Open Size: 420mm(w) x 297mm(h) • Close Size: 210mm(w) x 297mm(h)

SENSiA cold store

cabin total comfort
and control at −35ºC
Working in the sub-zero world of a cold store demands the
very highest standards of visibility, reliability and comfort.

SENSiA Cold Store models have been designed to work

productively and reliably – even in temperatures as low
as −35º C.

From its cold-resistant cabling and waterproofed electrics

to thermostatically controlled heaters for critical components
and optimised hydraulics, SENSiA delivers – even in the
harshest environments.

Spacious by design, SENSiA’s controls are within easy reach

reducing the risk of fatigue. Offering 360-degree visibility, our
rugged steel-frame cabins feature a hi-vis crash-proof roof for
an excellent upward view while protecting the operator against
falling debris. Our well-insulated cold store cabins, available on
all standard-sized SENSiA models, do much more than keep
operators warm very efficiently.

• Energy-efficient cabin is well insulated and features

1700 W heater, for operator comfort throughout long shifts.

• Heated windows protect against frost, misting and

condensation for excellent visibility and safe,
productive performance.

• Rugged steel collision guard refinforces protection to

bodywork and door for optimal safety.

• Spacious cabin keeps controls within easy reach for

maximum productivity.

• Two-way intercom (option) enables communication with

the driver, without opening the cabin door.
38058-AS Mitsubishi Sensia Brochure • Open Size: 420mm(w) x 297mm(h) • Close Size: 210mm(w) x 297mm(h)
38058-AS Mitsubishi Sensia Brochure • Open Size: 420mm(w) x 297mm(h) • Close Size: 210mm(w) x 297mm(h)
38058-AS Mitsubishi Sensia Brochure • Open Size: 420mm(w) x 297mm(h) • Close Size: 210mm(w) x 297mm(h)
 38058-AS Mitsubishi Sensia Brochure • Open Size: 420mm(w) x 297mm(h) • Close Size: 210mm(w) x 297mm(h)

options include
• toChoice of masts up • working
Wide range of • Load check scale
10.0 metres and
• USB power socket
• specification
Hot storage warning lights
• batteryroller
Dual bed
The wide load Multi-way reach trucks • colour
Custom shop truck
• pedestrian
Blue Spot
warning table
changing

specialist...
scheme system
• positioner
Choice of fork • thumb
Direction control by
or footswitch
capacities
2.0 – 2.5 tonnes widths

with narrow RBM20N2 RBM25N2

aisle agility. The Mitsubishi SENSiA EX multi-way reach

2.0 t 2.5 t

truck range is ideal for precise and intuitive

handling of wide and unusual loads of up
to 2500 kg – and lifting up to 10 metres – in
• Mitsubishi SDS (Sensitive Drive System)
provides intuitive driver-assist with
narrow aisles and on long shifts. graduated performance management
according to steer angle, foot and finger
Six multi-directional travel modes, all-wheel actuator velocity – significantly contributing
steering and braking and powerful AC traction to safety.
combine to deliver exceptionally agile, high-
intensity performance. Its wide forks make long
handling exact and effortless.
• Spacious, comfortable, award-winning
SENSiA cabin environment provides
effortless ‘total control’ operation and
Comfortable and spacious, the award-winning minimises operator fatigue.
SENSiA cabin, SDS and operator controls
provides excellent all-round visibility and
minimises operator fatigue.
• Unique fingertip control armrest with
integrated four-fingertip hydraulic control
for reach, lift, tilt and spread plus direction
• Mitsubishi TruckTool system for rapid
service diagnostics and customer-specific
and horn – all at the driver’s constant touch.

Passive Sway Control

truck optimisation by service engineer. • Broad battery change rollers are standard
in all models.

• Exceptionally smooth ‘no knock’ transition

Six travel modes between mast stages ensures exact
performance throughout lift range.
Lateral Standard Rotational
• Passive Sway Control dampens any
elevated load motion by allowing the
chassis to move slightly to compensate.

Sets reach truck Sets sideways travel Truck rotates in its

mode with load mode with load own wheelbase
wheels forwards. wheels sideways. (‘turn-on-the-spot’ mode).
• The adjustable BE
(beyond ergonomic)
Agile cornering Parallel Automatic transition armrest fully supports
the arm but leaves
elbow free, reducing
driver fatigue and long
term injury.

Steer and load wheels Harmonises drive Smoothly changes between

are harmonised to and load wheels lateral and standard
deliver enhanced for diagonal travel. (reach truck) modes without
cornering performance. stopping.
Wide spread/ Clear upward views Agile six-mode travel Fatigue-free operation
tilt fork positioner
38058-AS Mitsubishi Sensia Brochure • Open Size: 420mm(w) x 297mm(h) • Close Size: 210mm(w) x 297mm(h)

All-wheel steering and braking Wide spread/tilt fork positioner Rapid TruckTool tailoring and
diagnostics

Steering system Easy-access compartment Choice of key switch or PIN

with ergonomic hand bars, code access.
Unlimited 360-degree all- low non-slip step and entry
wheel steering gives precise provides safe and effortless Load check scale (+/-
control with minimal effort entry and exit. 50kg) helps driver to identify
Progressive steering overweight loads.
Folding steering wheel
enables easy manoeuvring console with adjustment for Wide choice of seats,
at low speeds and effortless column length and angle, lifts armrests and headrests
control when moving at speed fully upwards for easy access for maximum comfort and
and ensures optimum position minimum fatigue.
Brakes
for each driver. Convenient USB Power
High-efficiency regenerative socket for phone charging or
Multi-functional armrest
braking means effective other 5V personal equipment.
with four-fingertip control
control and reduced brake
keeps control for reach, lift, tilt, Audio system and 3.5mm
wear.
fork positioning, direction and input jack for MP3 player etc.
Hydraulic load wheel brakes horn all at the driver's constant
deliver agile performance. touch. Quick, foot-operated
battery-locking system
Hydraulics Multi-way-mode keypad
control is within driver's easy
Powerful AC hydraulic pump reach - for easy selection of its
motor provides smooth lifting 6 travel modes.
and lowering.
Easy-to-understand display
Electrical and control communicates key information
systems to driver including guidance,
warnings and alarms –
AC power on all motors encouraging good practice.
delivers smooth performance,
high torque and precise control EcoLogic and Professional
- through the longest shifts. modes (ECO/PRO) are
quickly selectable by
High performance ZAPI operator for extended shift life
motor drive controller or enhanced performance.
delivers robust and efficient
traction control. Options include
Temperature control in drive Choice of 2000kg and
and lift motors and controllers 2500kg capacities.
prevents damage from
overheating. Choice of masts up to 10.0m
Choice of fork positioner widths
Model shown: RBM20N2 SENSiA EX

Battery rollers make changes

quick, easy and safe. (1700mm or 2200mm)
BlueSpot pedestrian
Operator compartment
warning system
and controls
alerts co-workers to trucks
Spacious and comfortable operating nearby.
operator compartment, with
clear views and fast, accurate Working/drive lights to improve
fork positioning increases visibility in dark environments
productivity and reduces risks
of driver fatigue – even on the
longest shifts.
 38058-AS Mitsubishi Sensia Brochure • Open Size: 420mm(w) x 297mm(h) • Close Size: 210mm(w) x 297mm(h)

L4 L2 L1 x
1.1 4.28 4.20 4.19 1.8
1.2 Ah kg mm mm mm mm mm mm
RBM20N2
1.3 & 775 1100 2887 2850 610 1480 2630 337
1.4 RBM25N2 930 1300 2887 2850 610 1480 2630 337
1.5
1.6 RBM20N2 / RBM25N2
1.8
h1 h2 h3 h4
1.9
mm mm mm mm
2.1 2510 1800 5400 6200
2.3 TREV 2610 1900 5700 6500
2.4 2677 1967 5900 6700
2.5 2810 2100 6300 7100
3043 2333 7000 7800
3.1 3210 2500 7500 8300
3.2 3377 2666 8000 8800
3.3 3543 2833 8500 9300
3.5 3710 3000 9000 9800
3.7 3877 3167 9500 10300
4043 3334 10000* 10800
4.1
4.2
4.3
4.4
4.5
4.7
4.8

a/2
4.10 l
4.15
4.19
4.20

h4
4.21

Wa

ȕ
4.22
4.24

Į
4.25
4.26

h1
l7
4.28
4.32

Ast / Ast3

h6

h2 / h3
4.33/a
4.34/b
c
4.35

h7
4.37

Q
m1/ m2

h13
h8
5.1
5.2 l4
5.3
5.4
5.8 y

R
5.9 l2 x
l7
5.10
l1

a/2
6.1
6.2
6.4
6.5 e
6.6
b5
8.1 b4
10.7**** b11
10.7.1**** b3
Body
Hand b1