1

WWW.DIESELSHIP.COM

FEBRUARY 2024
SR.NO. EM – 20224 - 2

EXAMINATION OF MARINE ENGINEER OFFICER

Function: Marine Engineering at Management Level
MARINE ENGINEERING KNOWLEDGE (MOTOR)
M.E.O. CLASS II
TIME ALLOWED - 3 HOURS
Total Marks - 100
INDIA (2024)

Instructions:
1. Answer SIX questions only.
2. All Questions carry equal marks
3. Neatness in handwriting and clarity in expression carries weightage
4. Illustration of an Answer with clear sketches /diagram carries weightage
5. State answering from the backside of the front cover page.
6. Blank pages if any, to be struck by (X) at the end of each question.

Get quick access to answers via “dsguides” app. can be installed in any devices that runs on windows | iOS | mac
OS | android OS| Devices such as phones, computers, mobiles, tablets etc.
please click here to purchase our original books. we have solved all past exam papers of last 15 years. clean
content, cad drawing with our 15 years of expertise in maritime publishing.

Q1. Sketch a cross section through a piston rod stuffing box.

a) Define with detail sketches the function of and difference between, sealing rings and scraper rings
(10)
b) Identify with reasons those details which should receive particular attention during overhaul of the
complete assembly. (6)
2015/SR07 2024/FEB/Q1

Q2. With reference to the behaviour of fabricated bed plates & frames in service:
(a) Identify the various forces imposed simultaneously upon them. (6)
(b) Explain how engine structure withstands these forces? (5)
(c) State how these forces are transferred to ship structure? (5)
2014/SR06 2016/SR01 2012/SR04 2013/SR10 2014/SR11 2015/SR07 2016/SR07
2017/SR02 2018/FEB/Q6 2019/DEC/Q2 2022/OCT/Q5 2024/FEB/Q2

Q3. Explain the modern methods of turbo charging available such as: (16)
WWW.DIESELSHIP.COM DIESELSHIP
 2
WWW.DIESELSHIP.COM
a) Pulse converter system
b) Sequential turbo charging
c) Two stage turbo charging
d) Variable geometry turbochargers
2013/SR01 2024/FEB/Q3

Q4. With respect to carriage of LNG as bunker on board ship & subsequent consumption of the fuel in
the diesel engine, discuss: (16)
a) Types of bunker tank arrangement
b) Liquefied gaseous fuel containment safeties
c) Bunkering Requirements
2024/FEB/Q4

Q5. During a routine crankcase inspection, a main engine top end bearing is found to be wiped and
subsequent inspection shows that the pin is badly scored.
a) Explain in detail the action which should be taken to enable the engine to be safety operated so that
the vessel may reach a port where effective repair facilities are available. (10)
b) State with reasons the factors which influence the speed at which the engine may be safely operated.
(6)
2009/SR2 2008/SR8 2013/SR12 2014/SR06 2016/SR01 2017/SR02 2018/SR01
2021/JUL/Q2 2023/AUG/Q4 2024/FEB/Q5

Q6. a) Sketch and describe a flywheel that would be fitted to a large marine diesel engine. (8)
b) Explain the role of the flywheel during engine starting and stopping operations, including its function
in providing momentum for initial engine rotation. (4)
c) Discuss the recent advancements in flywheel technology for main engines, such as light-weight
materials, enhanced designs, or integrated monitoring systems. (4)
2024/FEB/Q6

Q7. a) Compare the advantages of forged and built-up crankshafts with special reference to the
magnitude of the stresses in the cranks; (5)
b) How would you check the deflections by means of a dial gauge through one revolution of the shaft?
(4)
c) How are the readings obtained interpreted? (4)
d) How wear is down measured? (3)
2011/SR8 2011/SR11 2013/SR09 2024/FEB/Q7

Q8. Describe the procedure in lining up an engine bedplate, main bearings, gear box, thrust block,
propeller shafting and tail-end shaft, assuming this to be a new ship. (16)

WWW.DIESELSHIP.COM DIESELSHIP
 3
WWW.DIESELSHIP.COM
2011/SR8 2011/SR11 2024/FEB/Q8

Q9. Describe the developments that have taken place in the design of bearings of slow speed marine
diesel engines, focusing on the reasons for such changes. (16)
2024/FEB/Q9

PLEASE CLICK HERE TO PURCHASE OUR ORIGINAL BOOKS. WE HAVE SOLVED ALL PAST EXAM PAPERS
OF LAST 15 YEARS. CLEAN CONTENT, CAD DRAWING WITH OUR 15 YEARS OF EXPERTISE IN MARITIME
PUBLISHING

WWW.DIESELSHIP.COM DIESELSHIP