SAFETY DATA SHEET
MasterSeal 901 PART C
Version Revision Date: SDS Number: Date of last issue: 22.09.2021
1.1 27.09.2023 000000017585 Date of first issue: 22.09.2021
1. PRODUCT AND COMPANY IDENTIFICATION
Product name : MasterSeal 901 PART C
Product code : 000000000050258358
Manufacturer or supplier's details
Company : Master Builders Solutions India Pvt. Ltd
Address : PLOT NO D-126, TTC IND AREA,MIDC , SHIRAVANE
NAVI MUMBAI ,MAHARASHTRA, INDIA MAH 400706
Telephone : +918657927378
Emergency telephone : ChemTel: +1-813-248-0585; India: 000-800-100-4086
Recommended use of the chemical and restrictions on use
Recommended use : Oxidizing agents
Restrictions on use : Reserved for industrial and professional use.
2. HAZARDS IDENTIFICATION
GHS Classification
Oxidizing solids : Category 3
Acute toxicity (Oral) : Category 4
Skin irritation : Category 2
Eye irritation : Category 2A
Respiratory sensitization : Category 1
Skin sensitization : Category 1
Specific target organ toxicity - : Category 3
single exposure
Short-term (acute) aquatic : Category 3
hazard
GHS label elements
Hazard pictograms :
Signal Word : Danger
1 / 11
SAFETY DATA SHEET
MasterSeal 901 PART C
Version Revision Date: SDS Number: Date of last issue: 22.09.2021
1.1 27.09.2023 000000017585 Date of first issue: 22.09.2021
Hazard Statements : H272 May intensify fire; oxidizer.
H319 Causes serious eye irritation.
H315 Causes skin irritation.
H302 Harmful if swallowed.
H334 May cause allergy or asthma symptoms or breathing
difficulties if inhaled.
H317 May cause an allergic skin reaction.
H335 May cause respiratory irritation.
H402 Harmful to aquatic life.
Precautionary Statements :
Prevention:
P280 Wear protective gloves/ protective clothing/ eye protec-
tion/ face protection.
P260 Do not breathe dusts or mists.
P271 Use only outdoors or in a well-ventilated area.
P210 Keep away from heat, hot surfaces, sparks, open flames
and other ignition sources. No smoking.
P273 Avoid release to the environment.
P284 In case of inadequate ventilation wear respiratory protec-
tion.
P272 Contaminated work clothing should not be allowed out of
the workplace.
P264 Wash face, hands and any exposed skin thoroughly after
handling.
P270 Do not eat, drink or smoke when using this product.
P221 Take any precaution to avoid mixing with combustibles.
P220 Keep away from clothing and other combustible materi-
als.
Response:
P333 + P313 If skin irritation or rash occurs: Get medical ad-
vice/ attention.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water
for several minutes. Remove contact lenses, if present and
easy to do. Continue rinsing.
P304 + P341 + P311 IF INHALED: If breathing is difficult, re-
move to fresh air and keep at rest in a position comfortable for
breathing. Call a POISON CENTER or doctor/physician.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P304 + P340 IF INHALED: Remove person to fresh air and
keep comfortable for breathing.
P301 + P330 IF SWALLOWED: rinse mouth.
P332 + P313 If skin irritation occurs: Get medical advice/ atten-
tion.
P362 + P364 Take off contaminated clothing and wash it before
reuse.
P337 + P313 If eye irritation persists: Get medical advice/ at-
tention.
Storage:
P403 + P233 Store in a well-ventilated place. Keep container
tightly closed.
P405 Store locked up.
2 / 11
SAFETY DATA SHEET
MasterSeal 901 PART C
Version Revision Date: SDS Number: Date of last issue: 22.09.2021
1.1 27.09.2023 000000017585 Date of first issue: 22.09.2021
Disposal:
P501 Dispose of contents/container to appropriate hazardous
waste collection point.
Other hazards which do not result in classification
No specific dangers known, if the regulations/notes for storage and handling are considered.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance / Mixture : Substance
Chemical nature : Oxidizing agents
Substance name : Disodium peroxodisulphate
CAS-No. : 7775-27-1
Components
Chemical name CAS-No. Concentration (%
w/w)
Disodium peroxodisulphate 7775-27-1 >= 75 - <= 100
4. FIRST AID MEASURES
General advice : First aid personnel should pay attention to their own safety.
Remove contaminated clothing.
If inhaled : After inhalation of dust.
Keep patient calm, remove to fresh air.
If difficulties occur:
Seek medical attention.
In case of skin contact : After contact with skin, wash immediately with plenty of water
and soap.
Under no circumstances should organic solvent be used.
If irritation develops, seek medical attention.
In case of eye contact : In case of contact with eyes, rinse immediately with plenty of
water and seek medical advice.
If swallowed : Immediately rinse mouth and then drink 200-300 ml of water,
seek medical attention.
Do not induce vomiting unless told to by a poison control cen-
ter or doctor.
Most important symptoms : Harmful if swallowed.
and effects, both acute and Causes skin irritation.
delayed May cause an allergic skin reaction.
Causes serious eye irritation.
May cause allergy or asthma symptoms or breathing difficul-
ties if inhaled.
May cause respiratory irritation.
3 / 11
SAFETY DATA SHEET
MasterSeal 901 PART C
Version Revision Date: SDS Number: Date of last issue: 22.09.2021
1.1 27.09.2023 000000017585 Date of first issue: 22.09.2021
Notes to physician : Treat symptomatically.
5. FIRE-FIGHTING MEASURES
Suitable extinguishing media : Foam
Water spray
Dry powder
Carbon dioxide (CO2)
Unsuitable extinguishing : water jet
media
Specific hazards during fire : Heating can release hazardous gases.
fighting
Do not allow run-off from fire fighting to enter drains or water
courses.
Hazardous combustion prod- : toxic gases/vapours
ucts
Specific extinguishing meth- : The degree of risk is governed by the burning substance and
ods the fire conditions.
Containers may rocket or explode in heat of fire.
Remove product from areas of fire, or otherwise cool contain-
ers with water in order to avoid pressure build up due to heat.
Collect contaminated extinguishing water separately, do not
allow to reach sewage or effluent systems.
Fire residues and contaminated fire extinguishing water must
be disposed of in accordance with local regulations.
For safety reasons in case of fire, cans should be stored sepa-
rately in closed containments.
Use a water spray to cool fully closed containers.
Special protective equipment : Wear a self-contained breathing apparatus.
for fire-fighters
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protec- : Use personal protective clothing.
tive equipment and emer- Avoid contact with the skin, eyes and clothing.
gency procedures Avoid dust formation.
Do not breathe dust.
Handle in accordance with good building materials hygiene
and safety practice.
Ensure adequate ventilation.
Environmental precautions : Contain contaminated water/firefighting water.
Do not discharge into drains/surface waters/groundwater.
Methods and materials for : Avoid raising dust.
containment and cleaning up
4 / 11
SAFETY DATA SHEET
MasterSeal 901 PART C
Version Revision Date: SDS Number: Date of last issue: 22.09.2021
1.1 27.09.2023 000000017585 Date of first issue: 22.09.2021
Contact with incompatible substances can cause decomposi-
tion at or below SADT.
Soak up with inert absorbent material.
To clean the floor and all objects contaminated by this materi-
al, use plenty of water.
Non-sparking tools should be used.
7. HANDLING AND STORAGE
Advice on protection against : Substance/product in the dry state promotes fires.
fire and explosion The relevant fire protection measures should be noted.
Keep away from combustible material.
Advice on safe handling : Avoid dust formation.
Wear suitable protective clothing and eye/face protection.
Avoid inhalation of dusts/mists/vapours.
Breathing must be protected when large quantities are de-
canted without local exhaust ventilation.
Avoid exposure - obtain special instructions before use.
Avoid contact with skin and eyes.
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the ap-
plication area.
Provide sufficient air exchange and/or exhaust in work rooms.
Dispose of rinse water in accordance with local and national
regulations.
Persons susceptible to skin sensitization problems or asthma,
allergies, chronic or recurrent respiratory disease should not
be employed in any process in which this mixture is being
used.
Conditions for safe storage : Keep container tightly closed in a dry and well-ventilated
place.
Containers which are opened must be carefully resealed and
kept upright to prevent leakage.
Observe label precautions.
Electrical installations / working materials must comply with
the technological safety standards.
Further information on stor- : Protect against moisture.
age conditions Protect against contamination.
The product should not come into contact with exposed iron or
non-ferrous metal during storage or processing.
Materials to avoid : Segregate from reducing agents.
Segregate from flammable substances.
Segregate from strong acids.
Segregate from strong bases.
Segregate from heavy metals.
Do not store near acids.
5 / 11
SAFETY DATA SHEET
MasterSeal 901 PART C
Version Revision Date: SDS Number: Date of last issue: 22.09.2021
1.1 27.09.2023 000000017585 Date of first issue: 22.09.2021
Further information on stor- : No decomposition if stored and applied as directed.
age stability
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Ingredients with workplace control parameters
Contains no substances with occupational exposure limit values.
Personal protective equipment
Respiratory protection : Wear respiratory protection if ventilation is inadequate.
Filter type : Combination filter for gases/vapours of organic, inorganic,
acid inorganic and alkaline compounds (e.g. EN 14387 Type
ABEK).
Hand protection
Remarks : butyl rubber (butyl) - 0.7 mm coating thickness Manufactur-
er's directions for use should be observed because of great
diversity of types.
Eye protection : Tightly fitting safety goggles (splash goggles) (e.g. EN 166)
Skin and body protection : light protective clothing, thick material
Body protection must be chosen based on level of activity and
exposure.
Protective measures : Avoid contact with the skin, eyes and clothing.
Avoid inhalation of dusts.
Handle in accordance with good building materials hygiene
and safety practice.
Hygiene measures : When using, do not eat, drink or smoke.
Hands and/or face should be washed before breaks and at the
end of the shift.
At the end of the shift the skin should be cleaned and skin-
care agents applied.
Gloves must be inspected regularly and prior to each use.
Replace if necessary (e.g. pinhole leaks).
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance : crystalline
Color : white
Odor : odorless
pH : approx. 4,3 (20 °C)
6 / 11
SAFETY DATA SHEET
MasterSeal 901 PART C
Version Revision Date: SDS Number: Date of last issue: 22.09.2021
1.1 27.09.2023 000000017585 Date of first issue: 22.09.2021
Concentration: 250 g/l
Melting temperature : > 180 °C
Decomposition: The substance / product decomposes.
Flash point : does not flash
Evaporation rate : The product is a non-volatile solid.
Flammability (solid, gas) : not flammable
Self-ignition : not self-igniting
Vapor pressure : No data available
Relative vapor density : The product is a non-volatile solid.
Relative density : approx. 1,6
Density : approx. 1,2 g/cm3 (20 °C)
Bulk density : 1.200 - 1.350 kg/m3 (20 °C)
Solubility(ies)
Water solubility : 556 g/l (20 °C)
Decomposition temperature : approx. > 65 °C
Self-Accelerating decomposi- : approx. 180 °C
tion temperature (SADT) Method: Heat accumulation / Dewar 500 ml (SADT, UN-Test
H.4, 28.4.4)
Viscosity
Viscosity, dynamic : Not applicable
Explosive properties : Not explosive
Oxidizing properties : The substance or mixture is classified as oxidizing with the
category 3.
Self-heating substances : No data available
Minimum ignition energy : > 999 mJ
10. STABILITY AND REACTIVITY
Reactivity : No decomposition if stored and applied as directed.
Chemical stability : No decomposition if stored and applied as directed.
Possibility of hazardous reac- : Reacts with reducing agents, heavy metals.
tions No decomposition if stored and applied as directed.
7 / 11
SAFETY DATA SHEET
MasterSeal 901 PART C
Version Revision Date: SDS Number: Date of last issue: 22.09.2021
1.1 27.09.2023 000000017585 Date of first issue: 22.09.2021
Conditions to avoid : See SDS section 7 - Handling and storage.
See SDS section 7 - Handling and storage.
Incompatible materials : Reducing agents
Strong acids
Strong bases
Heavy metal salts
Hazardous decomposition : sulfur oxides
products
11. TOXICOLOGICAL INFORMATION
Acute toxicity
Harmful if swallowed.
Skin corrosion/irritation
Causes skin irritation.
Serious eye damage/eye irritation
Causes serious eye irritation.
Respiratory or skin sensitization
Skin sensitization
May cause an allergic skin reaction.
Respiratory sensitization
May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Germ cell mutagenicity
Not classified based on available information.
Carcinogenicity
Not classified based on available information.
Reproductive toxicity
Not classified based on available information.
STOT-single exposure
May cause respiratory irritation.
STOT-repeated exposure
Not classified based on available information.
Aspiration toxicity
Not classified based on available information.
Further information
Product:
Remarks : Health injuries are not known or expected under normal use.
The product has not been tested. The statements on toxicolo-
gy have been derived from the properties of the individual
components.
8 / 11
SAFETY DATA SHEET
MasterSeal 901 PART C
Version Revision Date: SDS Number: Date of last issue: 22.09.2021
1.1 27.09.2023 000000017585 Date of first issue: 22.09.2021
12. ECOLOGICAL INFORMATION
Ecotoxicity
Product:
Ecotoxicology Assessment
Acute aquatic toxicity : Harmful to aquatic life.
Persistence and degradability
No data available
Bioaccumulative potential
No data available
Mobility in soil
No data available
Other adverse effects
Product:
Additional ecological infor- : An environmental hazard cannot be excluded in the event of
mation unprofessional handling or disposal.
Harmful to aquatic life.
13. DISPOSAL CONSIDERATIONS
Disposal methods
Waste from residues : Observe national and local legal requirements.
The waste code in accordance with the European waste cata-
log (EWC) must be specified in cooperation with disposal
agency/manufacturer/authorities.
Residues should be disposed of in the same manner as the
substance/product.
Contaminated packaging : Contaminated packaging should be emptied as far as possi-
ble; then it can be passed on for recycling after being thor-
oughly cleaned.
14. TRANSPORT INFORMATION
International Regulations
UNRTDG
UN number : UN 1505
Proper shipping name : SODIUM PERSULPHATE
Class : 5.1
Packing group : III
Labels : 5.1
Environmentally hazardous : no
IATA-DGR
9 / 11
SAFETY DATA SHEET
MasterSeal 901 PART C
Version Revision Date: SDS Number: Date of last issue: 22.09.2021
1.1 27.09.2023 000000017585 Date of first issue: 22.09.2021
UN/ID No. : UN 1505
Proper shipping name : Sodium persulphate
Class : 5.1
Packing group : III
Labels : Oxidizer
Packing instruction (cargo : 563
aircraft)
Packing instruction (passen- : 559
ger aircraft)
IMDG-Code
UN number : UN 1505
Proper shipping name : SODIUM PERSULPHATE
Class : 5.1
Packing group : III
Labels : 5.1
EmS Code : F-A, S-Q
Marine pollutant : no
Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
Not applicable for product as supplied.
15. REGULATORY INFORMATION
Safety, health and environmental regulations/legislation specific for the substance or mix-
ture
If other regulatory information applies that is not already provided elsewhere in this safety data
sheet, then it is described in this subsection.
16. OTHER INFORMATION
Revision Date : 27.09.2023
Full text of other abbreviations
AIIC - Australian Inventory of Industrial Chemicals; ANTT - National Agency for Transport by
Land of Brazil; ASTM - American Society for the Testing of Materials; bw - Body weight; CMR -
Carcinogen, Mutagen or Reproductive Toxicant; DIN - Standard of the German Institute for
Standardisation; DSL - Domestic Substances List (Canada); ECx - Concentration associated with
x% response; ELx - Loading rate associated with x% response; EmS - Emergency Schedule;
ENCS - Existing and New Chemical Substances (Japan); ErCx - Concentration associated with
x% growth rate response; ERG - Emergency Response Guide; GHS - Globally Harmonized Sys-
tem; GLP - Good Laboratory Practice; IARC - International Agency for Research on Cancer; IATA
- International Air Transport Association; IBC - International Code for the Construction and
Equipment of Ships carrying Dangerous Chemicals in Bulk; IC50 - Half maximal inhibitory con-
centration; ICAO - International Civil Aviation Organization; IECSC - Inventory of Existing Chemi-
cal Substances in China; IMDG - International Maritime Dangerous Goods; IMO - International
Maritime Organization; ISHL - Industrial Safety and Health Law (Japan); ISO - International Or-
ganisation for Standardization; KECI - Korea Existing Chemicals Inventory; LC50 - Lethal Con-
centration to 50 % of a test population; LD50 - Lethal Dose to 50% of a test population (Median
Lethal Dose); MARPOL - International Convention for the Prevention of Pollution from Ships;
10 / 11
SAFETY DATA SHEET
MasterSeal 901 PART C
Version Revision Date: SDS Number: Date of last issue: 22.09.2021
1.1 27.09.2023 000000017585 Date of first issue: 22.09.2021
n.o.s. - Not Otherwise Specified; Nch - Chilean Norm; NO(A)EC - No Observed (Adverse) Effect
Concentration; NO(A)EL - No Observed (Adverse) Effect Level; NOELR - No Observable Effect
Loading Rate; NOM - Official Mexican Norm; NTP - National Toxicology Program; NZIoC - New
Zealand Inventory of Chemicals; OECD - Organization for Economic Co-operation and Develop-
ment; OPPTS - Office of Chemical Safety and Pollution Prevention; PBT - Persistent, Bioaccumu-
lative and Toxic substance; PICCS - Philippines Inventory of Chemicals and Chemical Substanc-
es; (Q)SAR - (Quantitative) Structure Activity Relationship; REACH - Regulation (EC) No
1907/2006 of the European Parliament and of the Council concerning the Registration, Evalua-
tion, Authorisation and Restriction of Chemicals; SADT - Self-Accelerating Decomposition Tem-
perature; SDS - Safety Data Sheet; TCSI - Taiwan Chemical Substance Inventory; TDG - Trans-
portation of Dangerous Goods; TECI - Thailand Existing Chemicals Inventory; TSCA - Toxic Sub-
stances Control Act (United States); UN - United Nations; UNRTDG - United Nations Recom-
mendations on the Transport of Dangerous Goods; vPvB - Very Persistent and Very Bioaccumu-
lative; WHMIS - Workplace Hazardous Materials Information System
The information provided in this Safety Data Sheet is correct to the best of our knowledge, infor-
mation and belief at the date of its publication. The information given is designed only as a guid-
ance for safe handling, use, processing, storage, transportation, disposal and release and is not
to be considered a warranty or quality specification. The information relates only to the specific
material designated and may not be valid for such material used in combination with any other
materials or in any process, unless specified in the text.
UN / EN
11 / 11
