Scribd
Upload
22 views1 page

MTC - Energy-Dn 101

Uploaded by

cmanrek
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
22 views1 page

MTC - Energy-Dn 101

Uploaded by

cmanrek
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

INDUSTRIAL CABLE MANAGEMENT SYSTEMS CO. W.L.L.

P. O. BOX: 22108, DOHA QATAR

COATING INSPECTION AND TEST CERTIFICATE


INSPECTION AND TESTING IN ACCORDANCE WITH ISO 10204 FOR COMPLIANCE WITH ASTM A 123 / BS EN ISO 1461: 2009

CERTIFICATE # 24-06-14686 DATE 5-Jun-24

Name of Customer Energy Tec

Client DO # ET/DN/ICMS/24/101

OUR JOB #

Coating Thickness (in microns) Average Mass of Zn


Item # Part No. Item Description Qty UOM Coating (in gms / sq.
Thickness m)
R1 R2 R3 R4 R5

STEEL SUPPORT SIZE-


1 04 NOS PCS 93 95 100 75 99 92.4 659.736
2800X200X50MM(H100)

STEEL SUPPORT SIZE-


2 02 NOS PCS 80 83 79 97 81 84 599.76
2000X100X50MM(H100)

STEEL SUPPORT SIZE-


3 04 NOS PCS 90 84 121 94 100 97.8 698.292
1820X100X50MM(H100)

ZINC COATING APPEARANCE

The accepatability of the coating finish is judged by the inspection condition laid down in BS EN 1461 - under- coating properties - point
No. 6 on page 6.
Zinc coating is free of gross surface imperfection of bare spots, heavy lumps and blisters.

ADHESION TEST.

Zinc Coating does not lift of in large flakes when tested with pivoted hammer and stout knife as per ASTM A 123

THIS IS TO CERTIFY THAT ABOVE MATERIALS HAVE BEEN HOT DIP GALVANIZED TO ASTM A 123 / BS EN ISO 1461: 2009
STANDARD

QC Inspector QA / QC Manager

Gal –F-104/Rev 0/ Dated 10/01/2017

You might also like