ON THE JOB TRAINING

An OJT Report

Presented to The Faculty of the College of Engineering and

Architecture

Philippine College of Science and Technology

Old Nalsian Road Nalsian Calasiao Pangasinan

In partial fulfillment Of the requirements for the degree

Bachelor of Science in Electrical Engineering

By:

Jovellanos Elfer Jhon G.

TABLE OF CONTENT

CHAPTER I

-HISTORY

-COCOGEN INSURANCE, Inc PHILOSOPHY

-MISSION

-VISION

-ORGANIZATION CHART

CHAPTER II

-TRAINING PROGRAM

-AREAS OF TRAINING

-COMPANY SERVICES

-NATURE OF OJT WORK

-EVALUATION

RECOMMENDATION

CHAPTER III

DAILY ACTIVITY REPORT

-WEEKLY ACCOMPLISHMENT REPORT

-DIFFICULTIES OF WORK

-CHALLENGES ABOUT WORK

APPRECIATION OF WORK

-NEW KNOWLEDGE ATTITUDE AND SKILL ACQUIRED

APPENDICES

-APPENDIX A: DOCUMENTATION

- APPENDIX B: DTR (DAILY TIME RECORD)

- APPENDIX C: ENDOREMENT LETTER

- APPENDIX D: REGISTRATION FORM & FINAL PERMIT

- APPENDIX E: EVALUATION FORM

- APPENDIX G: CERTIFICATE OF COMPLETION

CHAPTER1

A 1.1HISTORY
The 20.0 MWp solar farm located in Sta. Barbara, Pangasinan is CleanTech’s solar farm underthe
OnemanaoagSolar Corp. (OMSC). A CleanTech subsidiary. The site, chosen for having one ofthe
highest solar irradiance in the country, flat land area, and available grid capacity. Is
currentlyunder construction.

With the detailed engineering design provided by Renesource Renewables.procurement

byCleantech,and construction covered by Pamatech and MN Electro. The 28 ha property owned
byCleantech will house 49,672 solar panels and 6 inverters. Upon completion, the site will have
thecapacity to generate 32.5 GWh annually. This puts the company in the position to displace
19.500more tons of CO2 emissions annually while powering around
16.000 households per year

The OMSC project brings numerous job opportunities to its host community. The
projectprovides 300 jobs during its construction. And is enpected to generate 12 more
permanent jobsonce the site is operational. Meanwhile, the implementation of ER 1-94 will also
provide incometo the area as one-centavo per kilowatt-hour (P0.01/HWh) of the Electricity
Sales will go to thehost community.

A 1.2 COCOGEN INSURANCE. INC PHILOSOPHY

The OMSC project brings numerous job opportunities to its host community. The
projectprovides 300 jobs during its construction. And is expected to generate 12 more
permanent jobsonce the site is operational. Meanwhile, the implementation of ER 1-94 will also
provide incometo the area as one-centavo per kilowatt-hour (P0.01/kWh) of the Electricity Sales
will go to thehost community

A 1.3 MISSION AND VISION

We are committed to transforming energy production and supply in the country by
providingclean and affordable energy to ensure the preservation of the environment. As well as
provideopportunity.growth,and impact to every local community where we are present.

Our goal is to be a best-in-class independent sustainable energy company in Southeast Asia

bydeveloping.acquiring. constructing. Owning.and operating IGW of renewables assets by 2025.

A1.4 TERMS AND CONDITIONS

At CleanTech. We promote a family-oriented work culture. This creates a workplace where
allemployees have a strong relational bond and feel appreciated.encouraged. and supported
Over-all. Our environment promotes satisfaction and increases productivity which ultimately

A 1.5 ORGANIZATION CHART

CHAPTER 2

A 2.1 TRAINING PROGRAM

Established in 2019. CleanTech Foundation is dedicated to building and
empoweringcommunities through education. sports development.health care. capacity building
andenvironmental sustainability programs. Stemming from the Foundation's goal of touching
thelives of millions of Filipinos, we strive to create the kind of impact that is measurable in
terms ofreach. and adaptive to the varying needs of the different communities where we
operate.

A 2.2 COMPANY SERVICES

The OMSC project brings numerous job opportunities to its host community. The
projectprovides 300 jobs during its construction. and is expected to generate 12 more
permanent jobsonce the site is operational. Meanwhile, the implementation of ER 1-94 will also
provide incometo the area as one-centavo per kilowatt-hour (P0.01/kWh) of the Electricity Sales
will go to thehost community
A 2.3 NATURE OF OJTs WORK
Every college student must undergo an On the Job Training or practicum. It is a
courserequirement. It wasdone through applying the knowledge and talent that we have
learned aswell as gaining and learning new knowledge. It serves as a training ground for the
workplace.Itis indeed true that nothing beats knowledge. And that experience is the best
teaching method.This On-The-Job Training helped me realize how beneficial it is to both know
what you're doingand love it. As a student. all I can do right now is to learn as much as I can
inclass,findinspiration. appreciate the road I'm on. and give everything I do my best effort while
maintaining positive mindset. My goal is to become a registered Electrical engineer someday. I
was inspired by many thing sthat are why I tahe my schoolwork and studies more seriously and
with greater determination.Iwas urged to put forth more effort in my academic endeavor's. My
confidence was boosted by the training. which also laid the groundwork for me to one day be a
valuable employee. As astudent pursuing a bachelor's deree in Electrical engineering, this On-
The-Job Training has a significant impact on me. I felt truly rejuvenated. I developed my
different skills both in I am aware that I need to concentrate more in school and give everything
I have to it .that I accomplished something is also quite energizing. and it is much more
energizing when others are so proud of what I have accomplished. I experienced this emotion
during my on-the job training. It inspired me to be more competitive and determined in all I do
in my daily life. both as a student and as a professional in the future. As an incoming 4th -year
student studying Electrical engineering. I have received a great deal of value from my on-the-job
training and will make the best out of it. I felt as though it really offered me a taste of what life
is like in the real world and a preview of what lies ahead once I graduate.

A 2.4 RECOMMENDATIONS

The incoming OJT students should fulfill professionalism. Always arrive on time for work. Work
in collaboration with your coworkers. Observe company rules and procedures. Be capable of
handling any duty that is assigned to you. Bring plenty of patience to the job. Never fail to smile.
Maintain a professional demeanor at work and in your appearance. Be diligent and exercise self
control. In the office, distractions must be kept to a minimum. OJT has the advantage of
allowing students to practice their new skills in the actual workplace setting on-the-job trainees
can be beneficial for both the trainees and the businesses that offer such opportunities for
learning. The front lines are where wisdom is found. Such training may be a wise investment for
the business in the long run. This is another reason why interns should treat their employment
seriously because they could end up being a valuable resource and even a source of
recommendations for them as they make the transition from being students to career
professionals. On-the-job training can be a successful training technique, giving an employee a
wealth of practical knowledge and skills, nevertheless, it needs to be implemented and
facilitated with care in order to produce the best outcomes.

CHAPTER 3

A 3.1 DAILY ACTIVITY REPORT

June 20, 2024 our first day first activity we do is briefing at the field then afternoon at the same
day our activity is grass cut ang then june 24, we deploy at the field our activity is check all pv
modules then june 25-29 activity we do is cleaning the Pv modules. July 12024 our activity that
day is grass cut then July 2-6 we installed weather station to monitor the weather then we
overnight because thy have team building July 8 2024 theirs have problem of 2 inver the SCADA
is broken we manually monitor that time July 9 sadly our ó inverters broken the scada we
manually monitor it time to time to report at the office using viber same at the few days July 9-
13. July 15 our activity again is cleaning the SCB then July 16 we reading the scada then July
17:20 were go at the Daroy Elementary School for brigada skwela because our company have a
support of thet school we installed electricfan. TV, outlet, CB BOX ETC. Then July 22-23 we do is
reading at the scada only from time to time and then July 24-25 evaluation 1v1 question and
answer for a better grades and july 26 Awarding and then before we go home our last activity i
planting at the front of control room and thats it

A 3.2 WEEKLY ACCOMPLISHMENT REPORT

1st WEEK
In the first day of our ojt at OnemanacagSolar first we meet Engr Jef for the briefing first we do
is we also introduced ourselves as five ojts, then we go at the field he discuss the different
instrument of solar plat, the second they we deploy at the field to check the panel if have crack
or bird poof then we encountered the panel is need to clean in our third to fifth we clean the
panel to prevent the target efficiency of panel.

2nd WEEK
On the second week of our ojt, we were installed weather station to monitor all kinds of
weather first we do is we put the cable of pryanometer inside the HDPE almost 3 days because
the length of cable around 800 meters then 4th and 5th day we terminate to sink the weather
station

3rd WEEK
Our SCADA or Supervisory Control and Data Acquisition if fault we cannot detect the fault of
inverter or PV MODULES no choice need to monitor manually we deploy at the inverter to
monitor it time to time to prevent the fault we do that almost 1 week

4th WЕЕK
We go to the Daroy Elementary School for brigada skwela we installed electricfan and other
kinds of we can do

5th WEEK
In order to complete and complete the tasks given to me during this final week of on-thejob
training. I still had to. Though I was relieved that my training would soon be over. I also felt a
twinge of sadness at the prospect of leaving the workplace where I had made so many
wonderful memories shall long miss the individuals who I grew to care for. Despite my sadness
at leaving them, I am still glad that I once in my life had the opportunity to meet individuals who
shared my interests and, more importantly, who motivated me to do my best. My abilities were
put to the test the chance to demonstrate skills and my knowledge
DIFFICULTIES OF WORK:
Regular maintenance is essential to maintain the health of the solar power plant. Any defect in
the solar panel or other components should be promptly repaired or replaced to ensure the
plant is running at maximum efficiency. Therefore, it is important to schedule regular
maintenance checks to identify any issues and take corrective actions promptly.

CHALLENGES ABOUT WORK:

Solar power has emerged as a sustainable alternative to conventional sources of energy, such as
fossil fuels. The demand for solar energy has increased in recent years due to its ability to
reduce carbon emissions and contribute towards a cleaner environment. However, solar power
plants face various challenges that can impact their efficiency and output. In this article, we will
explore the major challenges faced by solar power plants and discuss ways to overcome them.

APPRECIATION OF WORK:
Solar power has emerged as a sustainable alternative to conventional sources of energy
However, solar power plants face various challenges that can impact their efficiency and output
These challenges include dust and debris accumulation, weather conditions, inverter failures.
solar panel degradation, maintenance, grid failures or outages, high temperature, cloudy
weather, and shading, proactive monitoring, system design, and ageing of equipment.

NEW HNOWLEDGE, ATTITUDE, SHILLS SOCOTEC:

I experience and learned through my OJT in OneManaoagSolar Corp. First thing learned in the
comp any is to make the task easier and done as soon as possible. I learned how solar plant
work the i learned how to run the solar plant and also I learned the on the jobtraining is an
subject to be passed or a requirement to be completed but on the job training is an opportunity
to show what skills, talents and techniques that I learned to school and it is also an experience
the life outside the campus. I acquired new attitudes. To be punctual, professionalism and
respect. The new skills that i show in our OJT. I improve my communication skills and improve
myself to be more confidence.

APPENDICES
DOCUMENTATION:
Grass cutting to prevent the shadow inside the panel
Cleaning all panels to prevent shadow and to maintain the cleanliness and to maintain the
efficiency of the panel
Cable Pulling of wire for Weather Station
Manual monitoring of inverter
Manual monitoring of inverter
Tighten the cross brick to
Monitoring SCB(string combiner box)
Monitoring temperature oil
Installing solar radiation sensor for weather station to measure broadband solar irradace as well
as solar radiation flux density
Checking weather station
GRADUATION
DTR (DAILY TIME RECORD)
ACKNOWLEDGEMENT

With the deepest gratitude and appreciation, I humbly give thanks to the people who patiently
helped me in making my on the job training possible.

To my parents for their unending love and support for providing all my needs financially and
morally for their patience and understanding. For their pieces advice and for being there at all
times.

To my siblings who served as my inspiration. For keeping me inspired to push myself to the
limits and to make the best out of everything.

To the institution where I am studying, PHILIPPINE COLLEGE OF SCIENCE AND TECHNOLOGY,

where I was molded to become who I am today.

To all my professors who patiently imparted their knowledge in order for us to acquire a better
future. To everyone who became a part of my success.

To my friends, classmates and to everyone who have shown support. Above all, to our Almighty
God for His immeasurable love and for all the blessings He has showered upon me. With all my
heart and soul I thank Him for guiding me during my training in this On-The-Job Training. For the
provisions and wisdom He has bestowed upon me. For keeping me and my love ones safe. I
thank Him for His comfort when I was to give up. By His grace I was able to finish without any
conflict.
EVALUATION FORM
CERTIFICATE OF COMPLETION
REGISTRATION AND PERMIT FOR OJT