EPAS – Design and Configuraiton
System Devices configuration introduction
EcoStruxureTM Power Automation System
Power Solutions Global Training
2021
Confidential Property of Schneider Electric
Internal
Chapter Objectives
By the completion of this chapter, you will be able to:
• Configure system devices in SCE from a
starting database used as example
• Understand purpose of SCE objects used
for system devices
Confidential Property of Schneider Electric | Page 2
Internal
Safety Information
This is training presentation, reference information is in Official Technical Guides.
▪ It is advisable to read all the Safety
Information, all the time before trying to
Install, Operate, Service or Maintain it.
▪ Electrical equipment should be installed,
operated, serviced and maintained only
by qualified personnel.
▪ Work with facility IT System
Administrators to ensure that the system
adheres to the site-specific cybersecurity
policies.
Failure to follow these instructions can result
in death, serious injury, or equipment
damage.
Confidential Property of Schneider Electric | Page 3
Internal
Agenda
• Starting Database
• System global configuration
• Devices configuration
• HMI Configuration
• Generic IEC 61850 IED : IEC server
• 3rd party IED client : IEC Client
• System Labels defined in Profiles
Confidential Property of Schneider Electric | Page 4
Internal
System configuration from starting DB
Confidential Property of Schneider Electric | Page 5
Internal
• Use Starting Database
▪ Re use database from similar project
▪ Or use starting database from COE
▪ standard devices preconfigured
▪ profiles table done
Confidential Property of Schneider Electric | Page 6
Internal
SCS hierarchy for System devices
• New SCE objects in SCS hierarchy
– Subnetworks folder :
• mandatory to defined at least one
network
– IEDs folder :
• mandatory to connect every IED to a
subnetwork
Confidential Property of Schneider Electric | Page 7
Internal
• Configure Global parameters for SCS
▪ Select SCS object
▪ Set time zone, labels, alarms features and computer routing (for C264 and C5)
Confidential Property of Schneider Electric | Page 8
Internal
• Configure EPAS Devices
▪ Under SCS / IEDs from Object Entry window ,
add :
“C264”, “C5”
“IEC61850 gateway “
“OI Server” , “OI Client”
“Generic IED“
Confidential Property of Schneider Electric | Page 9
Internal
• Configure EcoSui Server
▪ Under SCS / IEDs
Add “OI Server” from Object Entry window
“OI Server” is IEC 61850 Client
Define short name, IED name, network name … Details in EcoSUi training
Confidential Property of Schneider Electric | Page 10
Internal
• Configure EcoSui HMI
▪ Under SCS / IEDs
Add “OI Client” from Object Entry window
To define the EcoSUI - HMI object
Set short name, IPv4 address and network name of computer host
Details in EcoSUi training
Confidential Property of Schneider Electric | Page 11
Internal
• Configure IEC61850 Generic IED
▪ Under SCS / IEDs
Add “Generic IED” from Object Entry window
“Generic IED” is IEC 61850 Server
Details in L3 IEC61850 for EPAS training
Confidential Property of Schneider Electric | Page 12
Internal
• Configure IEC61850 generic IED client
▪ Under SCS / IEDs
Add “OI Server” from Object Entry window
“OI Server” is IEC 61850 Client
Set IP address of “OI Server”
with IP address of 3rd party IED
Details in L3 IEC61850 for EPAS training
Confidential Property of Schneider Electric | Page 13
Internal
Network and Time server configuration
Confidential Property of Schneider Electric | Page 14
Internal
Access Point
• AP ( access point) for C264, IEC6185 gateway, generic IED, OIS
• Only one AP for C264
• IEC61850 IEDs can have 2 AP :
they will be connected to one
AP in SCE
Confidential Property of Schneider Electric | Page 15
Internal
Access Point for EPAS-Gateway IP Address for redundancy :
• AP (access point) for IEC61850 gateway
IP Address for GTW and Gooses :
Mandatory to complete relation “has for main AP”
Confidential Property of Schneider Electric | Page 16
Internal
Datamodel & Datflow Update
• Data model and dataflow update (automatic IEC mapping) has to be run from SCS / IEDs object only
Confidential Property of Schneider Electric | Page 17
Internal
SNTP server
• SNTP server configured on each AP connection
Confidential Property of Schneider Electric | Page 18
Internal
External SNTP server
• SNTP server external equipment
• Add “Generic IED” :
• Change Short name and
network name,
• Set IP Adress on AP
• Select ‘Main SNTP server’
on subnetwork connection
Confidential Property of Schneider Electric | Page 19
Internal
System Labels defined in profiles
Confidential Property of Schneider Electric | Page 20
Internal
• System Information Labels in Profiles
▪ All Devices Operating Mode (C264, GTW) => MPS
Note 1 : TEST Mode N/A for Subs HMI (OI / EcoSUI) and GTW
Note 2 : Useful for graphical animation
▪ MiCOM C264 Boards status => MPS Note 1 : Applicable for all kind of boards
Note 2 : Special status
Missing = in configuration
not in rack
Too Many = in rack not in
configuration
OK Empty = used at SMT only
Confidential Property of Schneider Electric | Page 21
Internal
• System Information Labels in Profiles
▪ ISaGRAF Status => MPS (under C264/PLC)
Note :
•Not Activated = No
ISaGRAF configured
•Cycle too long = cycle > 2s
•Queue Overflow =
ISaGRAF overflow
▪ EPAS UI Printer Status (parallel or LAN) (SOE/SLB) => MPS
Note 2 : N/A for C264 printer
LAN :
Parallel :
Confidential Property of Schneider Electric | Page 22
Internal
Internal
Internal
