DGS-1250 A1 Series Firmware Release Notes
Firmware Version: 1.00.024
MIB Version: DXS-1210-
R1.00-MIB-
20200515.zip
D-View Module Version: NA
Published: June. 15, 2020
These release notes include important information about D-Link switch firmware revisions.
Please verify that these release notes are correct for your switch:
- If you are installing a new switch, please check the hardware version on the device label;
make sure that your switch meets the system requirement of this firmware version.
Please refer to Revision History and System Requirement for detailed firmware and
hardware matrix.
- If the switch is powered on, you can check the hardware version by typing “show switch”
command via Telnet or by checking the device information page on the web graphic user
interface.
- If you plan to upgrade to the new firmware release, please refer to the Upgrade
Instructions for the correct firmware upgrade procedure.
For more detailed information regarding our switch products, please refer to Related
Documentation.
You can also download the switch firmware, D-View modules and technical documentation from
http://tsd.dlink.com.tw.
Content:
Upgrade Instructions: ...........................................................................................................2
Upgrade using CLI (via Telnet) ................................................................................... 2
Upgrade using Web-UI .............................................................................................. 3
Upgrade using D-Link Network Assistant ..................................................................... 4
New Features:....................................................................................................................6
Changes of MIB Module: ........................................................................................................6
Changes of Command Line Interface: ..........................................................................................7
Problem Fixed: ...................................................................................................................7
Known Issues: ....................................................................................................................7
Related Documentation: ........................................................................................................8
1
DGS-1250 A1 Series Firmware Release Notes
Revision History and System Requirement:
Firmware Version Date Model Hardware Version
DXS-1210-28T
Runtime: v1.00.024 15-Jun.-20 A1
DXS-1210-28S
Upgrade Instructions:
D-Link Smart Switches support firmware upgrade via TFTP server. You can download the
firmware from D-Link web site http://tsd.dlink.com.tw, and copy the downloaded firmware to
the TFTP server folder. Please make sure that the TFTP server is accessible from the switch via
networks.
Upgrade using CLI (via Telnet)
1. Make sure the network connection between the switch and PC is active.
2. Use software that supports telnet, for example, HyperTerminal or Telnet command in
Microsoft Windows, to connect to the switch. If you are using Telnet command, type the
command followed by the switch IP address, eg. telnet 10.90.90.90.
3. The logon prompt will appear.
The switch will prompt the user to enter his/her username and password. It should be noted
that upon the initial connection, both the default user name and password are admin.
To upgrade the switch firmware, execute the following commands:
Command Function
Download firmware file from the TFTP
copy tftp://location/filename flash:
server to the switch.
{Image1|Image2}
Change the boot up image file.
Boot image {Image1|Image2}
Display the information of current
Show boot boot image and configuration.
Reboot the switch
reboot
Example:
DXS-1210-28T:
Command: copy tftp: //10.90.90.99/DXS1210/DXS-1210_Run_1_00_024.had flash: Image1
Address of remote host [10.90.90.99]?
Source filename [DXS120/DXS-120_Run_1_00_024.had]?
Accessing tftp:// 10.90.90.99/DXS120/DXS-120_Run_1_00_024.had...
Transmission start...
Transmission finished, file length 8709008 bytes.
Please wait, programming flash.............. 100 %
Please wait, programming flash for language files .............Done.
2
DGS-1250 A1 Series Firmware Release Notes
Switch#
Switch#configure terminal
Switch(config)#boot image Image1
Switch(config)#end
Switch#sh boot
Unit 1
Boot image: /c:/Image1
Boot config: /c:/Config1
Switch#reboot
Are you sure you want to proceed with the system reboot?(y/n) y
Please wait, the switch is rebooting...
Upgrade using Web-UI
1. Connect a workstation installed with java SE runtime environment to any switch port of
the device.
2. Open the web browser from the workstation and enter the IP address of the switch. The
switch’s default IP address is 10.90.90.90.
3. Enter administrator’s password when prompted. The password is admin by default.
4. Two methods can be selected to update switch's firmware or configuration file. A. Go to
Tools > Firmware Upgrade & Backup > Firmware Upgrade from HTTP from the
banner. B. Go to Tools > Firmware Upgrade & Backup > Firmware Upgrade from
TFTP from the banner.
3
DGS-1250 A1 Series Firmware Release Notes
Upgrade using D-Link Network Assistant
1. Connect a workstation installed with java SE runtime environment to any switch port of the
device
1. Execute D-Link Network Assistant
3. Click Refresh button to search target switch
4. Single click the icon of the column to choose the target switch
4
DGS-1250 A1 Series Firmware Release Notes
5. Click Firmware Upgrade button
6. Select PC IP address is used to connect the target switch, then click Browse button and
select the firmware file (Model name_HW ver._FW ver. .hex) on your local hard drive.
5
DGS-1250 A1 Series Firmware Release Notes
7. Click the checkbox and click “Submit” button to start firmware upgrade.
8. Once the message changed to success, click “Close” button to complete and exit the
firmware upgrade
New Features:
Firmware Version New Features
V1.00.024 First Release
Changes of MIB Module:
For detailed changes of MIB content, please refer to the modification history in each MIB file.
Firmware MIB File New Features
Version
6
DGS-1250 A1 Series Firmware Release Notes
V1.00.024 DXS-1210-R1.00-MIB-20200515 First Release
Changes of Command Line Interface:
The section below only shows command line changes that may bring backward compatibility
issues with configuration settings for previous version of firmware.
Any new feature commands that do not have backward compatibility issues are not included in
the below section.
Firmware Changes
Version
V1.00.039 N/A
Problem Fixed:
Firmware Problems Fixed
Version
V1.00.024 First release
* D-Link tracking number is enclosed in ()
Known Issues:
Firmware Issues Worka
Version round
1. ACL-Ethernet - MAC_Fault Detected for incorrect MAC Address
Format can be configured on Web UI.
2. The system name can input invalid characters.
3. Some entry will not display Port Auto Negotiation detail parameter.
V1.00.024 4. DXS-1210 doesn’t support DNS-TFTP.
5. The target MAC address of gratuitous ARP packet is FFFFFFFFFFFF.
6. MAC_Address_Collision_Test_Random_MAC_Addresses: The
packet loss rate of random mode is more than 18K DUT. Cannot
pass criteria of packet loss rate less than 1%.
7
DGS-1250 A1 Series Firmware Release Notes
7. Cannot mirror 100 jumbo frames in two sources to one destination
setting under full speed. It’s chipset limitation.
8. Storm Control: Switch set 0 Kbps that is the max. forwarding rate.
9. When link partner is link-down, the cable diagnostics will not get
the correct value.
10. Lack of OID for 'dLbdLoopOccurred', 'dLbdLoopRestart',
'dLbdVlanLoopOccurred' and 'dLbdVlanLoopRestart'
11. No specified fan description by SNMP, there is different display
between CLI and SNMP.
12. Health Diagnostic test in ASV 2.0 can't detect correct distance via
CAT6A and CAT5e.
13. The remaining applicable IP related access entries do not decrease
after bind onto port interface (direction in).., always left 1536.
14. Unable to show loop status immediately for all tested ports(action:
none), loop status show up within 5 minutes. (It’s chipset
behavior)
Related Documentation:
- DXS-1210-28T/S A1 Web Manual, CLI Manual, Hardware Manual V1.0
- DXS-1210-28T/S A1 Getting Started Guide
