User Manual

Contents
1. Usage environment...................................................................................................................... 1
2. Installation Precautions .............................................................................................................. 1
3. Recommended steps .................................................................................................................... 2
4. Menu............................................................................................................................................. 2
5. User............................................................................................................................................... 3
5.1 Enroll .................................................................................................................................. 3
5.2 User List ............................................................................................................................. 4
5.3 Dept. ................................................................................................................................... 4
5.4 Down.Data ......................................................................................................................... 5
5.5 Up.Data .............................................................................................................................. 5
6. Schedule ....................................................................................................................................... 5
6.1 Rec Warning ...................................................................................................................... 5
6.2 Grace Min .......................................................................................................................... 6
6.3 Log Info .............................................................................................................................. 7
7. Report........................................................................................................................................... 7
8. System ........................................................................................................................................ 10
8.1 General settings ............................................................................................................... 10
8.2 Advanced settings ............................................................................................................ 10
9. Door Setup ................................................................................................................................. 11
9.1 Door Setup ....................................................................................................................... 12
9.2 Time Setting ..................................................................................................................... 12
9.3 Lock Register ................................................................................................................... 12
9.4 Time Group...................................................................................................................... 13
9.5 Unlock Group .................................................................................................................. 15
9.6 Lock Type Set .................................................................................................................. 15
10. Bell ............................................................................................................................................ 15
11. Communication ....................................................................................................................... 16
11.1 Comm ............................................................................................................................. 16
11.2 Server ............................................................................................................................. 17
11.3 NTP ................................................................................................................................. 18
11.4 Ethernet .......................................................................................................................... 18
11.5 Wifi ................................................................................................................................. 19
12. System Information................................................................................................................. 20
Appendix 1 Schematic Diagram of Access Control Wiring ................................................. 20
Appendix 2 T9 Input Method ................................................................................................. 22
 User Manual

Thank you for using our products, which adopt the latest biometrics solution and high
speed stable ARM processor. The product's recognition, speed and other performance
indicators are in the industry leading level, fully meet your efficient work
requirements.
 Due to the continuous update of the product, all performance and parameters
are subject to the actual product, any change without prior notice. The actual
product may be inconsistent with the information, and shall not be liable for
any discrepancy between the actual technical parameters and the information.
 The picture description in this document may not match the picture of the
product in your hand, please refer to the actual product.

1. Usage environment
1） Avoid installing device in a place where strong light is shining. Strong light
has influence on face recognition,, which may lead to the failure of face
recognition verification.
2）The operating temperature of the device is 0℃–45℃.Avoid long-term outdoor
use. Long-term outdoor use will affect the normal operation of device. If it is
must be used outdoors, It is recommended to use sunshade and heat
dissipation equipment in summer and heat preservation equipment in winter.

2. Installation Precautions
Fix the rear panel on the wall→Install the device on the rear panel →tighten the
screw on the bottom of the machine.
1）Before installation, please make sure that the power system of device is
turned off during installation. Live installation and wiring operations can
cause damage to the machine due to contact with the power cord.
2）On the situation that static electricity is a bit heavy, please connect ground wire
first and then connect other wires, which can protect the device from damaging
in static electricity.
3）If do not use some ports of terminals. Please do not expose the lines that
connect the unused ports. It may cause short circuit damage to equipment.
At the same time, please use different colored lines to connect ports for
distinguishing different port.
4）Please connect other lines before connecting the power cord, and finally
power test. If it is found that the device cannot work normally after power
on, the power must be cut and check device and all the lines.
5）If the distance between the power supply and the device is far, it is strictly
forbidden to use network cable or other special wire instead of power cord.
6）When wiring the attendance device, due to abnormal wiring, the device
circuit, motherboard and fingerprint scanner are burnt out, which causes the
device cannot be used normally, which is not within the scope of warranty.

1
 User Manual

3. Recommended steps
1） Step 1: Open the box to check the device and power on the device. Check for
exceptions, set the date and time of the device, and install the device.
2） Step 2: Add users and register users’ face、password, etc.
3） Step 3:Set shift.
4） Step 4:Set up shift schedule for users.
5） Step 5:Download attendance records at the end of month.

4. Menu

In initial interface, click the icon“ ”in the lower left corner of screen to access into
menu, when an admin is registered, After passing the verification of admin’s face or
password then the menu can be entered

• User : Enrol user, view user list, department setting, download enrolment data
and upload enrolment data.
• Schedule :records warning setting, grace minimum setting, logs information.
• Report :Set company name ,it will be shown in reports, download attendance
reports in Excel format , attendance logs in TXT format.
• System settings : It provides general settings, like time, timezone, language
settings, also some other functions, like setting card output
format, deleting all users and logs , device testing .ect.
• Door Setup : Set Wiegand output format, lock delay , time setting , lock
register setting and time group setting.
• Bell : Set timed ring, a total of 24 groups can be set.
• Communication : Set device No. , server setting, NTP setting, Ethernet
setting and wifi setting.
• Information : Query registration information and detailed information of
device.

2
 User Manual

5. User

The basic information of the user on the device includes face, password and Privilege.
In attendance management, due to personnel changes. Therefore, the device provides
add, delete, change the user and other operations.
Click the icon in the lower left corner of screen to access into menu →【User】, It
includes enrol user, view user list, department setting, download enrolment data and
upload enrolment data.

5.1 Enroll

1) ID: When registering, each user can only have one unique ‘ID’.
2) Name: Input、edit name by T9 input method.
3) Dept.: The default department is the first department , you can edit department

3
 User Manual

information in 【Dept.】 before enrolling users.

4) Face: Follow the on-screen prompt for face registration.
5) Password: An ID can only register one password. After clicking the password
icon, enter the password to be set and then press ok to confirm the
password again.

Remark: Verify password by clicking icon in the lower left corner of the
screen when the device is in standby mode, input ID-click ‘OK’-input
password-click ‘OK’

5.2 User List

Browse all registered persons in the device, click corresponding user to edit its
information, including name, password, dept, admin; You can also change face
registration information or delete this user, you can quickly locate the user you want
to edit by 【Find ID】 or 【Find Name】at the top of the page.

5.3 Dept.
Edit department name, up to 14 departments can be supported

4
 User Manual

5.4 Down.Data
Insert U-disk, download the user information(including name, face.etc), it is
recommended to backup user information regularly.

5.5 Up.Data
Insert U-disk, upload the previous backup file, This operation can also be used
to synchronize personnel information between two devices of two same model.

6. Schedule

Click the icon in the lower left corner of screen to access into menu →
【 Schedule 】 , It includes record warning setting, grace min setting and log
information.

6.1 Rec Warning

5
 User Manual

【Log Warning】：When the number of remaining records that can be stored

is less than the value, a warning message will be
displayed when punching.
【Log Interval】：If the user repeatedly verifies within the set time, the
device will prompt that already verified, and this record
will not be stored.
【Save Photo】：Sets whether to save the photo when registering face, photo
files can also be exported when downloading enrolment
data.

6.2 Grace Min

Item Unit Meaning Scope

When user’s late arrival time exceeds ***
Late Min 0-60
mins , then it is counted as late arrival.
When user’s early leave time exceeds ***
Early Leave Min 0-60
mins , then it is counted as early leave.

6
 User Manual

6.3 Log Info

Input the user ID and time range to query records of the corresponding user, if set
user ID area to blank, then it will query all records of all users

7. Report

Click the icon in the lower left corner of screen to access into menu →
【Report】, it includes company name setting, download/upload shift, download
report and download attendance records.

【Company】:Set company name, it will be shown in report.

【Download shift】:Insert U-disk, can download shift settings information(Times

Table) and user scheduling information(Shift table) in Excel format, then edit it on pc,
pls refer to the below picture:

7
 User Manual

Edit shift according to actual shift time. After editing and save the file into
U-disk.
Note：
1） For data security. Must copy the file to the computer, and then edit, and then
copy back to the U disk. Do not edit directly in U-disk. Otherwise, an error will be
prompted when uploading.
2）Attendance time must be in the format of time, and attendance type must be in
the format of digits. So when you handle the setting, pls pay attention that the input
method is in English half-angle status. Checking Method: For example, when you
input 10:30, double click this cell, then software will automatically turn the digits into
10:30:00.
3）If you don't need to clock at noon, combine the two sections into one. For
example: 08：30-12：00 13：30-17：50, it can be set to section 1: 08：30-17：50
Time Skip setting is not allowed. For example, when you complete the setting of
Section 1, you cannot skip Section 2 and get to set Section 3.

Assign shift to users, the "1" in this table represents shift 1 (the default shift is
shift 1), according to real situation to assign shift to users.
1-24 represent the different shifts, 25 and 26 correspond to leave and business
trip respectively and can‘t be modified, If set to blank, it represents rest or holiday.
We recommend to editing and uploading the sheet to device before downloading
attendance report at the end of the month.

【Upload shift】：After editing, insert U-disk and click【Upld Shift】, then you
can upload the edited shift settings and user scheduling information into device.
【Download report】：Insert U-disk, select the start and end time, then click
‘Report’ to download, it includes 5 different kinds of reports as below:

8
 User Manual

【Download File】：Download the log file in TXT format, and the number behind file
name represents device ID.

9
 User Manual

8. System

Click the icon in the lower left corner of screen to access into menu →
【System】, it includes general settings and advanced settings.

8.1 General settings

Item Meaning

Time Set device time

Timezone Set the device's time zone, which is GMT+8 in China

Language Set device language

Volume Set the volume of speaker

Result Time Display time of user information after punching

How long does it take to enter screen saver when the main
Screen Idle
Interface is not operating
Short Identify distance is within 0.5m
Identify Distance Middle Identify distance is within 2m
Long Identify distance is within 5m

8.2 Advanced settings

10
 User Manual

Item Meaning

Max Admin Set the maximum number of device admin

Set the format of the machine to read the card No., optional 10D、8D、
Card Type
2H+4H

Protect Excel Set whether the downloaded sheet can be edited

Delete all users Delete all users（operate cautiously）

Delete all logs Delete all logs（operate cautiously）

No Verify that the user is a live person instead of photo.

By Infra and Infra + Color have different verification
Prevent Photo By Infra
levels about live person. The verification level of Infra
Infra + Color + Color is higher than By Infra

Testing Check whether the camera is normal

Restore the system setting parameters of the device to the factory state
Default
without affecting personnel and records

Firmware Upload Insert U-disk for device firmware upgrade

9. Door Setup

Click the icon in the lower left corner of screen to access into menu →【Door
Setup】, it includes door setup, time setting, lock register ,time group , unlock group
settings.

11
 User Manual

9.1 Door Setup

Item Meaning

Wiegand Output Set the type of wiegand output, optional user ID or card No.

Wiegand Bit Optional 26 bit or 34 bit

Set the time between lock relay effective and the state of
Lock Delay
resume normal.

9.2 Time Setting

According to the rules and regulations of user's entry and exit, Set the access
time of each week to the corresponding time setting, you can totally set 50 periods.
Note:04 period is alarm period

9.3 Lock Register

Click corresponding user to set user time zone, the number set in the lock

12
 User Manual

register column represents different meaning, ：represents an interval character, the

first number represents the group that user belongs to, the other three numbers
represent the serial number of time setting that we set in the previous section; After
verifying in device, check if the time is in user time zone, if it is, then door will be
opened, if not, first check if the user belongs to the user group, if not, it isn’t allow to
open the door, if it is, then check if this time is within group time zone, if it is, then
door will be opened, otherwise, it isn’t allow to open the door;
Note：Group time zone is set in section 9.4 Time Group, each user group can set
up to three time zones

Item Meaning
The user belongs to group 1, and the last three are all 00, which means
1:00:00:00 it will check if this time is in group time zone of group 1 rather than
check user time zone, because all the user time zones are set to 00
The user belongs to group 1, This user applies time setting 01, example:
Time setting 01 set the time from 08:00-10:00 on Monday, Then the
user only has permission to open the door at 08:00-10:00 on Monday. If
1:01:00:00 the user don’t make punch within the time zone, first check if the user
belongs to group 1, if not, it isn’t allow to open door; if it is, then check
if the time is in group time zone, if it is, the door will be opened,
otherwise, it isn’t allow to open door;
The user belongs to group 2, This user applies time setting 01 and time
setting 02, example: Time setting 01 set the time from 08:00-10:00 on
Monday ,Time setting 02 set the time from 13:00-15:00 on Monday,
Then the user has permission to open the door during these two time
2:01:02:00
periods on Monday. If the user don’t make punch within the time zone,
first check if the user belongs to group 2, if not, it isn’t allow to open
door; if it is, then check if the time is in group time zone, if it is, the
door will be opened, otherwise, it isn’t allow to open door;

It can be free combined ,access periods and so on

You can quickly locate the person you want to edit by 【Find ID】 or 【Find
Name】at the bottom.

9.4 Time Group

Time group defines the group time zone during which the users belong to
this group can open the door, each group can set up to 3 【time setting】
As below sheet:【Group 1】includes three time zones:01,03 and 05
【Group 2】to 【Group 5】only include time zone 01

The first time The second The third time

13
 User Manual

zone time zone zone

Group 1 01 03 05
Group 2 01 00 00
Group 3 01 00 00
Group 4 01 00 00
Group 5 01 00 00

Verification flow chart based on user access control settings:

User Verification

Verify success
Yes

Check user time zone

Is this time within user Yes

time zone range ?

No

Check user group

No Does the user belong

to that user group?

Yes

Check group time zone

No Is this time within Yes

Open the door
group time zone range ?

14
 User Manual

9.5 Unlock Group

Example: Set open group1 to 01.02.00, it means in the definition of user access control in the
above section, it is defined that one from group 1 and another one from group 2 together to verify
that can open the door. Time group can be set up to 5 groups

Example 1：Single one can open the door

Group 1 01.00.00
In the above Settings, which means that only users belonging to group 1 have access to the
door.

Example 2： Different users from different groups

Group 1 01.02.00
In the above Settings, which means that need 2 users that one belonging to group 1 and
another one belonging to group 2 must together to verify that have access to the door.
Users belonging to group 1 and users belonging to group 2 do not have the right to open the
door independently.

9.6 Lock Type Set

A. Alarm Type
Set the type of door sensor, the default setting is ‘NG’. It means that the door sensor
function is not enable.
NC (Normal Close) and NO (Normal Open) are optional.
B. Alarm Delay
If the door keeps the status that opposites the lock type for more than delay setting time,
device will alarm.

10. Bell

Click the icon in the lower left corner of screen to access into menu →【Bell】,
Up to 24 groups of scheduled ring time.

15
 User Manual

11. Communication

Click the icon in the lower left corner of screen to access into menu →
【Comm】

11.1 Comm

16
 User Manual

Item Meaning
Set corresponding device No., the default device No. is 1, Please note that
Device No.
the number is related to the communication

Port No. The default port No. is 5005, For communication connection under LAN

The default setting is 0, it means that there is no communication password.

Net Pwd If you want to change the password, you should also set the same password
in the software
If you use Ethernet or Wifi communication, please select
Local (LAN)
mode to Local
Mode
If you use server communication, please select mode to
Internet(WAN)
Local, mainly used for cloud attendance

11.2 Server

When you select the mode to internet in 【Comm】, please do corresponding

server settings on this page.

17
 User Manual

Item Meaning

Server Req Select 'yes' to enable server communication

Server Enter the server IP address or server domain name

Server Port Enter the server communication port No.

11.3 NTP
It is for calibrating the device time. After enabling, set the corresponding NTP
server, and the device will calibrate according to this server.

11.4 Ethernet

Item Meaning

1、Enable Yes / No, Whether to use this connection

18
 User Manual

Yes / No
1、 Select “Yes”. Device will automatically get a valid IP address
2、Select “No”. You need to set the IP address manually
2、DHCP
3、In Local mode, we recommend to set the IP address manually, because if you
restart the device, it may get another valid IP address. So that the software
cannot communicate with the device.
4、Please do the settings according to the real network situation.

When using Ethernet, please disable wifi

11.5 Wifi

Item Meaning

1、Enable Yes / No
Yes / No
1、In Local mode and use supporting software ,select “No”, then set the IP
2、DHCP
address manually
2、In Internet mode, we recommend to select “Yes”
The operation steps are similar to the operation method of connecting the
mobile phone to the WIFI. Select “Search”，Device will spend a short time
3、Search
searching for signals, Then select the WIFI you want to connect to and enter the
password
When using Wifi, please disable Ethernet

19
 User Manual

12. System Information

Click the icon in the lower left corner of screen to access into menu →【Info】,
query registration information and detailed information of device.

Appendix 1 Schematic Diagram of Access Control Wiring

1) Schematic diagram of device wiring port
(According to the number of port to select corresponding wiring diagram)
8 pin port:

Red 12V 12V

Black GND GND
Green Lock COM The common end of the lock signal
Orange Lock NC Normal closed end of the control signal
Blue Lock NO Normal opened end of the control lock signal
Yellow Button Exit button
Brown D-Sensor Door sensor
White ALARM- Output alarm signal

20
 User Manual

10 pin port:

Red 12V 12V

Black GND GND
Green Lock COM The common end of the lock signal
Orange Lock NC Normal closed end of the control signal
Blue Lock NO Normal opened end of the control lock signal
Yellow Button Exit button
Brown D-Sensor Door sensor
Purple Bell+ Door Bell +
Gray Bell- Door Bell-
White ALARM- Output alarm signal

6 pin port: 4 pin port:

Red 12V 12V TCP_TX+

Black GND GND TCP_TX- TCP/IP
Orange WG_IN0 Wiegand input 0 TCP_RX+ Interface
Yellow WG_IN1 Wiegand input 1 TCP_RX-
Green WG_OUT0 Wiegand output 0
White WG_OUT1 Wiegand output1

2) Device connection diagram

(According to the number of port to select corresponding wiring diagram)

21
 User Manual

Remark: When the power supply of the access controller is insufficient (The facial
device may shut down automatically when face recognition happens）. In this case,
please wiring as below diagram:

Appendix 2 T9 Input Method

Touch 'Alt' to switch capital/small letter or number, after finished,touch ‘Ok’ to save it
How to input punctuation:when the input method is in capital/small letter
state,continuous click ‘ ’ to select what you want to input. The first one is space, the
second is dot and so on .

22