All manuals and user guides at all-guides.

com

m
MOTUS 990T SERIES

.co
es
uid
-g
all
 All manuals and user guides at all-guides.com

The user manual contains the details of how to install safely and how to use the product. For the
purposes of optimal use of the product and to prevent the accidents, make sure to read this user
manual from the beginning to the end carefully. Also, we put in many pictures together for easier
understanding of cautions. Please make sure to understand what pictures mean, and then read
user manual.

The user manual contains the details of how to install safely and how to use the product. For the
purposes of optimal use of the product and to prevent the accidents, make sure to read this user
manual from the beginning to the end carefully. Also, we put in many pictures together for easier
understanding of cautions. Please make sure to understand what pictures mean, and then read
user manual.

In case that the product doesn’t work normally, please do not make an unauthorized repair or
disassembly. These treadmills do not contain any user-serviceable parts. Any service, other than
cleaning or user maintenance, must be performed by an authorized service representative. Any
changes or modifications to the treadmill could void the product warranty.

Class SB(studio) : professional and/or commercial use.

For information about the product, contact MOTUS customer service(Motus Customer Service) or
your dealer.

This manual is property of Motus, it is prohibited to copy this manual without Motus prior consent. Rev1.0
 All manuals and user guides at all-guides.com

CONTENTS
Safety Warnings & precautions 4
Grounding Instruction 4
Installation precautions 5
Precautions before use 7
Cautions during use 8
Management & Maintenance precautions 9

Product Features 10
Name of Each Part 12
Name of Display Console 13
Name & Function of Each Control Key 14

Precautions before use(Operating procedure) 15

Quick Start 16
Exercise program type 18
Preprogrammed program 19
Custom Program 20
HRC Program 21
Manual or Goal Program 25
Usage Digest 30
Pause Mode 30
Manager Mode 31
How to use TV media (M990TL, M995TL) 32
How to use MP3 32

Prenventive Maintenance 33
Troubleshooting guide 34
Protective Function 35
Level Adjustment 35
Belt Alignment 35
Manual Lubrication 36
Auto Lubrication 36
Belt Tension Adjustment 36

Specification 38
Manufacturer’s limited warranty 39
 All manuals and user guides at all-guides.com

M990T SERIES

Read all instructions before using the treadmill to ensure your safety. Make sure that all users read
and understand this manual.

DANGER
To reduce the risk of electric shock, always unplug the treadmill from the electric outlet
immediately after using and before cleaning or attempting maintenance activity.

WARNING
To reduce the risk of burns, fire, electric shock, or injury :

Connect each treadmill to a properly grounded electrical outlet.

Never leave the treadmill unattended. Unplug the treadmill from the power outlet when it
is not in use, before cleaning it, and putting on or taking off parts.
Do not place blanket on the treadmill. Never operate the treadmill with the air openings
blocked. Keep air openings free of lint, hair, or obstructing material.
Use the treadmill only for its intended use as described in this manual. Do not attach
accessories that are not recommended by Motus. It can cause an accident.
Stop using the treadmill and contact your dealer for repair, if the product is wet, if it is not
working properly, if it has a damaged cord or plug or if it has been dropped or damaged.
Do not pull the treadmill by the power cord or use the cord as a handle.
Never drop or insert objects into any opening in the treadmill. If an abject is dropped
inside, turn off the power and unplug the power cord from the outlet. If the object cannot
be retrieved, contact your dealer.
Do not operate where aerosol spray products are being used or where oxygen is being
administrated. Such substances create the danger of combustion and explosion.
To disconnect, turn all controls to the off position, then remove plug from outlet.
Intermittent and improper lubrication by manual operation not only reduces the expected
life span of product, but also might be the cause of the accident. Make sure to completely
lubricate periodically.
Do not stand on the display console or motor hood.
Never perform the striding belt alignment or tension adjustment while you or other person
are standing on the striding belt.
Never let your hands or your body touch the striding belt directly when the treadmill is in
operation, except for the purpose of exercise.

4 MOTUS
 All manuals and user guides at all-guides.com

M990T SERIES

WARNING

1m

2m
1m
Place the treadmill on a firm and even floor. Keep the machine horizontally. If not, this can be
Keep the space 1 to 2 meters surrounding the cause of vibration and noise.
treadmill.

Install the treadmill where ventilation is good. Do not use the treadmill outdoors or in humid or
dusty environments. Under too humid or dusty
condition, there can be malfunction.

When you move the product, do not collide the product with the wall or drop it on the floor.
The lubricant used in the treadmill shall use only the lubricant designated or provided by Motus.
If you use the general industrial lubricant or the one provided by other companies, the deck and
running belt may be damaged.
After the installation, absolutely do not make unauthorized alteration.
Make sure to use the power cord that Motus provides.

M990T SERIES 5
 All manuals and user guides at all-guides.com

M990T SERIES

WARNING

m
Check power source before use whether the
.co Place the plug completely into the outlet.
es
treadmill is proper for 120V AC or 230V AC. Bad connection with power source may cause an
explosion or a fire.
uid
-g

Do not use a warn-out plug or damaged outlet. Do not hold the plug with a wet hand.
This can result in a risk of electric shock or fire. This can result in a risk of electric shock.
This can result in a risk of electric shock or fire.
all

Do not connect several plugs into one outlet box. Make sure the cable is not crushed under
(Use the outlet with ground pin) the machine or other heavy objects.
The overheat of outlet can cause fire. This can be the cause of electric shock,
disconnection or fire.

6 MOTUS
 All manuals and user guides at all-guides.com

M990T SERIES

Do not use extension cord. Do not place the machine near a heating device.
Long cord can cause malfunction or stop of (Do not place the machine or line cord near a heating device.)
treadmill due to voltage drop.

Grip head of the plug when you unplug it. Cable can be
disconnected (damaged) if you pull cable itself when
unplug it.)

You must begin the exercise after consulting with your physician prior to beginning the exercise.
Do not exercise if you are sick or patient. This can cause an accident.
Make sure the emergency stop lanyard is tied to you and emergency push button switch is
unlocked on the right position before beginning the exercise.
The connection line with CD, MP3, and headphone shall be linked prior to beginning the exercise.
If the connection is made during the exercise, it may cause an accident.
Make sure to check the conditions of the treadmill before beginning the exercise. If the treadmill is
not properly in operation, do not use it.
Wear proper exercise cloth and shoes. Tie long hair back before exercise.
The loose outfit or towel shall be away from the running belt not to become caught in the belt or
roller. In the event that an object is caught, the treadmill makes the sudden stop which causes an
accident.
Do not operate the treadmill when someone is standing on the treadmill.
Take care when getting on and off the treadmill. Use the handlebars whenever possible. Place
your feet on the right and left side platforms before the running belt begins moving. Step onto the
running belt when the speed in is at or below 1.0 km/h.
Never step off the treadmill while the running belt is moving.

M990T SERIES 7
 All manuals and user guides at all-guides.com

M990T SERIES

WARNING

Do not push buttons with sharp object or pin etc. During operation, do not touch any moving parts or
This can cause electric shock. rotating parts with one s hand or any other object.
This can lead to severe injury to your body or damage on
the product.

Do not allow children, individuals or disabled Attach Emergency lanyard to waist level prior to
persons on or near the treadmill. beginning exercise.
Do not leave children unsupervised around the treadmill.

Please put safety guide on where to be easily Do not put any object inside between side platform
seen by user. and running belt.

8 MOTUS
 All manuals and user guides at all-guides.com

M990T SERIES

If you feel pain, dizziness, shortness of breath or abnormal symptoms during the exercise, Stop the
exercise immediately and consult with a physician.
Please refrain from unnecessary action during the exercise. Unnecessary actions like mobile
phone conversation, talking with other the person, taking beverage and etc. can cause unexpected
accident.
Do not use the treadmill in bare feet. Always wear shoes with rubber or high traction soles.
Do not allow more than one person to exercise on the treadmill. It may cause an accident.
The user manual indicates the maximum user weight of the product. Do not allow any persons with
more than the maximum user weight to use the product.
Make sure to use handle when mounting or dismounting the treadmill.
Absolutely do not walk or jog backwards on the treadmill. While the treadmill is in operation, do not
try to turn around on the treadmill.
Do not use the product for the purpose of animal exercise.
Do not use the damaged running belt or deck. Use of the damaged running belt or deck could
cause high risk of accident.
Make sure to exercise right in the middle of the running belt of the treadmill.
Exercise only at the speed and incline appropriate for your own physical strength. If you exercise at
a speed and incline faster than your capability, you may be under the risk of an injury.
Do not insert hand or any object in between the side platforms and the running belt.
Use your own safety guide including additional warning or cautions if necessary.
Treadmill is hard metal product, so make sure to be careful always when you use treadmill.

The treadmill must be properly grounded. Grounding will protect you against the danger of electric
shock by providing a path of least resistance for electric current in case of malfunction or short circuit.
The treadmill is equipped with a power cord, which has grounding conductor and a grounding plug.
The plug must be inserted into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances. If you don’t follow these grounding instructions, you
could void the warranty or suffer severe injuries.

DANGER
A risk of electric shock may result from improper connection of equipment-grounding conductor.
Check with a qualified electrician if in doubt about proper grounding technique. Do not modify the plug
provided with the product. Any modification to the electrical plug will result in a voided warranty. If it
doesn’t fit the outlet, get a proper outlet installed by a qualified technician. For 120V-class treadmill in
North America, a 20 amp dedicated circuit is recommended and a temporary adapter must not be
used to connect the plug to a two-pole receptacle.

M990T SERIES 9
 All manuals and user guides at all-guides.com

M990T SERIES

M990T series treadmill is distinct product line from Motus in its unique design and reliable functions as
advanced commercial treadmill.

Low Noise and Vibration

Through long-time manufacturing experience and
know-how, up-to-date structure analysis and
repeated tests, low noise is achieved and vibration
is minimized in wide speed range from low speed to
high speed. Higher torque in the low speed range
results in a little speed variation, which is based on
powerful motor and precise motor control.

Ergonomics Design
Console screen, handlebars and side platforms are
ergonomically designed based on body line, running
stances and running habits or viewing angle.
Various exercise information can be easily read
through the display and touch sensitive keys make
the user operate it conveniently while exercising.

Exercise Program
Built-in exercise programs, which are based on scientific analysis, allow user to enjoy various
exercises, and custom programs allow user to edit exercise program appropriate for themselves. Also
user can enjoy goal-oriented exercise programs based on distance, calories and time.

Auto Lubrication System

Manual lubrication is very troublesome and hard. By
replacing it with auto lubrication, it will be very
helpful to gym manager, especially to extend
product’s span of life. (M990TL, M990T)

10 MOTUS
 All manuals and user guides at all-guides.com

M990T SERIES

Heart Rate Course

The workout programs based on heart rate
monitoring are the optimal way to exercise safely
and efficiently within user’s fitness capability.
M990T series is equipped with built-in contact

m
heart rate system and optional telemetry heart
rate system, which measures user’s heart rate
exactly and then adjust the workout intensity
according to target heart rate.

Shock Absorber System

Multiple shock absorption not only helps to
.co
es
protect the joints of knees or ankles from the
repetitive impact of running but also offers natural
feeling during exercising.
uid

Convenient Manager Mode

Manager can set up maximum exercise time, maximum speed limit, measurement unit, pause time,
-g

lubrication amount per once, etc. Also manager can check accumulated distance, accumulated time,
error log, etc, so it enables manager to maintain the product more effectively.
all

Entertainments Function
User can enjoy various music and image using TV, DVD, and VTR. To protect the screen from user’s
contact, transparent protective plate is installed on the outside of LCD screen. Also there are a
spacious accessory tray, and head phone jack to enjoy a music using personal stereo like MP3
player.

M990T SERIES 11
 All manuals and user guides at all-guides.com

M990T SERIES

Display Console Accessory Tray

Accessory Tray
Emergency Key & Button

Audio Jack

Side Handlebars

Upright
Handle Posts Front Handlebar
(Contact H/R)

Motor Hood

Running Belt

Side Platforms

Adjustable
Rear Feets

End Caps

12 MOTUS
 All manuals and user guides at all-guides.com

M990T SERIES

Program Profile Window

SGD (Smart Graphic Display)

H/R Status Window

Exercise
Information Window
(FND : Flexible
Numeric Display)

Program Selection Key

Speed/Incline
Conversion Key
One Touch Control Key Window Scan Key
(Numeric Key)

[ M990T/ M995T ]

LCD Screen

Program Selection Key

Channel / Volume
Adjust Key
Program Profile Window
SGD
(Smart Graphic Display) TV on/off

Exercise Exercise
Information Window Information Window

H/R Lamp Display

Window Scan Key
One Touch Control Key
Speed/Incline Conversion Key (Numeric Key)

[ M990TL/ M995TL ]

M990T SERIES 13
 All manuals and user guides at all-guides.com

M990T SERIES

14 MOTUS
 All manuals and user guides at all-guides.com

M990T SERIES

Picture(symbols) Description

Check to ensure that the emergency key is in the right place

If emergency button is pressed, release it by turning it toward arrow direction

Plug in

Turn on the main power switch front-bottom of treadmill

Start exercise after selecting program

- Do not press START/STOP button while treadmill is already in the middle of STOP.
- Do not press Emergency key/Emergency button while treadmill is already in the middle of STOP.
- Tie Emergency key’s lanyard to your body before exercise.

Exercise Mode
Number of program
Exercise mode Description
M990T/TL M995T/TL

QUICK START 1 1 Start exercise immediately by pressing START / STOP button

PROGRAM 10 5 Choose one of various pre-programmed courses

CUSTOM 10 5 Edit speed / incline to be suitable user’s fitness condition

Speed or Incline is adjusted to maintain user’s heart rate within

HRC 5 2
target heart rate

MANUAL OR GOAL Distance / Calorie / Time Choose one of distance, calorie or time as workout goal

Cool Down Exercise

If the final exercise speed is over 8km/h, Cool Down Exercise begins with the scroll message of
“COOL DOWN...

- Cool Down Exercise continues for 3 minutes with 0% incline and 4km/h speed.
- If user wishes to finish exercise without a Cool Down session, touch the START / STOP key.
Then treadmill will stop.
- No key is available except SCAN and START / STOP during Cool Down Exercise.

M990T SERIES 15
 All manuals and user guides at all-guides.com

M990T SERIES

m
How to use quick start

1. Touch Start / Stop button then treadmill starts to run.

.co
Treadmill starts after sign on the screen.

- Treadmill starts at 1km/h of Speed and 0% of Incline.

2. Select a desired speed by using SPEED / button.

es
User can set up the speed more quickly with and numeric key. When using
numeric key, speed changes with the resolution of 1km/h from 1km/h to 10km/h.

- Default speed value is 1.0km/h.

- Speed can be controlled by the resolution of 0.1km/h with SPEED / button.
uid

3. Set up a desired incline by using INCLINE / button.

User can set up the incline more quickly with SCAN and numeric key. When
using numeric key, incline changes with the resolution of 1% from 1% to 10%.
-g

- Incline range is from 0% to 15%, and can be controlled (by changes with the resolution
of 0.5% with INCLINE / button.

4. To stop exercise, touch START/STOP button.

all

Cool Down Exercise begins at the end stage of exercise profile. If you press ‘START/STOP’
button, exercise stops immediately without Cool Down Exercise.

5. Built-in heart rate measurement

During exercise, user also can check heart rate with the contact heart rate sensor on the front
handle grip.

- Make sure to grasp contact heart rate sensor firmly.

16 MOTUS
 All manuals and user guides at all-guides.com

M990T SERIES

How to measure H/R with contact heart rate sensor

1. During exercise or treadmill stops, grasp contact heart rate sensor on the
front handgrip with both hands.
Grasp the center of right and left heart rate sensor at the same time.

- The more your palms are in contact with the contact heart rate sensor plate, the more
accurate data you can get.
- A result may be inaccurate due to a grip position, a contact surface, user or other
surroundings.

2. On the side of the H/R display window, the lamp starts to blink.
The blinking rate is the same as your heart rate.

3. After about 10 blinks, the result of your heart rate appears on the H/R display
screen. is displayed.
Result is in proportion to user exercise intensity.

4. After then, user s H/R result is updated every 5 seconds and displayed on
the H/R display screen.
- Contact H/R sensor is less accurate than wireless polar heart rate sensor. For more
accurate heart rate, wireless polar heart rate sensor is recommended.

- When using wireless polar H/R, it is recommended to exercise close to display console for more
accurate H/R sensing

M990T SERIES 17
 All manuals and user guides at all-guides.com

M990T SERIES

There are 5~10 preprogrammed workouts and 5~10 custom workouts which can be edited by club
manager. User can select a workout suitable for user’s condition while referring to workout patterns
and name. In case of custom workouts, user can edit workout patterns in the custom mode but only
can select a workout and exercise in the preprogrammed mode because customized workout pattern
is appended to preprogrammed mode.

Mode

To improve stamina of beginner. Low intensive program.

To strengthen stamina of healthy user.

To enhance fitness expert's physical strength.

High intensive program. (Available at M900T)

To promote general physical strength of user.

To promote overweight user's general physical strength.

To enhance oxygenation of the blood and to exercise for marathon course.

High intensity program. (Available at M900T)

To strengthen function of heart and lung.

More intensive program than Interval 1.

To improve entire stamina of user's and to exercise for marathon course.

To manage user s weight adequately.

- M990T, M990TL : All of 10 workouts are built-in.

- M995T, M995TL : 5 workouts are built-in.
(Rhythmic I, Rhythmic II, Rhythmic III, Dynamic I, Dynamic II )

18 MOTUS
 All manuals and user guides at all-guides.com

M990T SERIES

1. Select preprogrammed workout

If you press PROGRAM button, the message “SELECT WORKOUT / + ENTER” scrolls out
on the screen.

2. Select workout program

Touch ‘ENTER/PAUSE’ key after selecting one program with SPEED / ’ and or numeric
key. Next step is setup for exercise time. If you don’t press ‘ENTER/PAUSE’’ but ‘START/STOP’
key, exercise starts. Note - Default exercise time is 30 minutes.

Note - Default exercise time is 30 minutes.

3. Set up Exercise Time

After the message “SET TIME” is displayed, the message “TM30” comes out to indicate
exercise time is 30 minutes. Touch ‘ENTER/PAUSE’ key after setting up the exercise time with
SPEED / ’ or numeric key. Next step is setup for weight. If you don’t press ‘ENTER/PAUSE’
but ‘START/STOP’ key, the striding belt starts moving.

Note - Maximum exercise time can be set up in manager mode.

- Default weight value is 60kg.

4. Set up Weight
After the message SET WEIGHT” is displayed, the message T60” comes out to indicate
default user weight is 60kg. Touch ENTER/PAUSE’ key after setting up user s weight with
‘SPEED / ’ or numeric key. If you don’t press ENTER/PAUSE’ but ‘START/STOP’ key,
exercise starts.

Note - When setting up weight with SPEED / ’ key, unit value is(the value changes
with resolution of 1kg. If you keep pressing SPEED / ’ key for a while, weight
value increase or decrease rapidly.

5. Start Exercise
When the message “PRESS START” is displayed, touch the ‘START/STOP’ key and start
exercise. During exercise, you can increase or decrease speed with SPEED / ’ key.

6. End of Exercise
When the Exercise time is over, Cool Down Exercise begins only if final speed is over 8km/h.
You can stop Cool Down Exercise by pressing START/STOP key.

M990T SERIES 19
 All manuals and user guides at all-guides.com

M990T SERIES

This function allows you to select exercise with the workout patterns you want according to your
fitness ability. You can edit the speed and incline for each 5~10 programs.

1. Select Custom Mode

If you press ‘CUSTOM’ button, the message “SELECT WORKOUT / + ENTER” scrolls out
on the screen

2. Select Program Number

Touch ‘ENTER/PAUSE’ key after selecting program number you want to edit with ‘SPEED /
’ or numeric key.

3. Set up Speed
After the message “SET SPEED / + ENTER” is displayed, speed set up screen appears
and cursor blinks at first section in a red color. Touch ‘ENTER/PAUSE’ key after then setting up
the speed with the ‘SPEED / ’ or numeric key. After that, cursor moves automatically next
section. (There are total 10 sections. Each section consists of 3 columns)
After you complete the speed setup, the message “SET INCLINE / + ENTER” is displayed
on the screen.

4. Set up Incline
After the message “SET INCLINE / + ENTER” is displayed on the screen, incline set up
screen appears and cursor blinks at first section in a red color. Touch ‘ENTER/PAUSE’ key after
selecting the incline with the ‘SPEED / ’ or numeric key. After that, the cursor moves
automatically to next section. (There are total 10 sections. Each section consists of 3 columns)
After you complete the incline setup, the message “ENTER TO SAVE WORKOUT” is displayed
on the screen.

Note - 1 row in screen means 1%, and bottom line is 0%.

5. Save Program User Edited workout profile

After the message “ENTER TO SAVE WORKOUT” is displayed on the screen, touch
‘ENTER/PAUSE’ to save the edited program.

Note - Saved program is located from the end of preprogrammed workout and can be used
in the same way as preprogrammed workout.

20 MOTUS
 All manuals and user guides at all-guides.com

M990T SERIES

How to use Cardiovascular workout

Calculate maximum heart rate and target heart rate

m
Maximum heart rate (MHR) = 220 – AGE (YR),
Target heart rate (THR) = MHR 0 .8

Note - Contact H/R sensor is less accurate than wireless polar heart rate sensor. For H/R
exercise, it is recommended to use wireless polar heart rate sensor.

1. Select HRC Mode

.co
When you press HRC button, the message “SELECT WORKOUT /
on the screen.
+ ENTER” is displayed
es
2. Select ‘Cardiovascular’ workout
Touch ‘ENTER/PAUSE’ button after selecting ‘CARDIOVASCUAR’ with SPEED / ’ button.

3. Set up Time
uid

After the message “SET TIME / + ENTER” is displayed on the screen, the message “TM30”
comes out to indicate default exercise time is 30 minutes. Touch ’ENTER/PAUSE’ button after
setting up the exercise time with ‘SPEED / ’ or numeric key. Next step is weight setup If you
don’t press ‘ENTER/PAUSE’ but ‘START/STOP’ key, the striding belt starts moving.

Note - User can setup maximum exercise time in the manager mode
-g

4. Set up Weight
After the message “SET WEIGHT / + ENTER” is displayed on the screen, the message
“WT060” comes out to indicate default user weight is 60kg. Touch ‘ENTER/PAUSE’ button after
all

setting up user’s weight with ‘SPEED / ’ or numeric key. Next step is age setup. If you don’t
press ‘ENTER/PAUSE’ but ‘START/STOP’ key, the striding belt starts moving.

Note - When setting up the weight with ‘SPEED / ’ button, the increment or
decrement is done with the resolution of 1kg. If you keep pressing ‘SPEED / ‚
button for a while, weight value increase or decrease rapidly.

5. Set up Age
After the message “SET AGE + ENTER” is displayed on the screen, the message “AG35”
comes out to indicate the default user age is 35. Touch ‘ENTER/PAUSE’ button after setting up
user’s age with ‘SPEED / ’ or numeric key.

M990T SERIES 21
 All manuals and user guides at all-guides.com

M990T SERIES

6. Set up Target Heart Rate

After the message “SET HEARTRATE / + ENTER”, heart rate value 148 will be
displayed on the screen as a recommended THR for 35 years old user. If you want to change the
recommended THR, touch ‘ENTER/PAUSE’ button after adjusting the THR with ‘SPEED / ’
button.

Note - Target heart rate depends on user’s fitness condition. Make sure to consult with
doctor to set up more suitable target heart rate.

7. Start Exercise
When the message “PRESS START” is displayed on the screen, Press ‘START/STOP’ key.
After the striding belt starts moving, you can change the speed anytime during workout.

Note - Treadmill operates at the speed of 1.0km/h. During a workout, the incline cannot
be adjusted manually and INCLINE / is used to adjust ‘Target Heart Rate’
- Whenever you touch INCLINE / one time, the target heart rate is increased or
decreased by the resolution of 1. The changed target heart rate is displays on the
screen.

8. Start Cardiovascular Exercise

After 3 minutes for warming up, “START HEART RATE EXERCISE” scrolls and
Cardiovascular course starts.

9. Adjust Speed and THR

You can adjust the speed and the Target Heart Rate anytime with ‘SPEED / ’ key and
‘INCLINE / ’ key respectively.
- Your actual heart rate is detected every 5 seconds and the incline is automatically
Note adjusted to maintain your heart rate at target heart rate.
Actual heart rate Target heart rate - 11
Incline increases by 2% in 15seconds.
Target heart rate -10 Actual heart rate Target heart rate – 6
Incline increases by 2% in 15seconds.
Target heart rate - 5 Actual heart rate Target heart rate - 3
Incline increases by 1% in 15 second
Target heart rate - 2 Actual heart rate Target heart rate + 2
No adjustment in incline
Actual heart rate Target heart rate + 3
Incline decreases by 2% in 15 seconds.

10. Stop exercise

When exercise time is over or ’START/STOP’ key is touched, operation stops.

22 MOTUS
 All manuals and user guides at all-guides.com

M990T SERIES

How to use Fat Burn workout

Calculate maximum heart rate and target heart rate
Maximum heart rate (MHR) = 220 – AGE (YR),
Target heart rate (THR) = MHR 0 .65

Note - Contact H/R sensor is less accurate than wireless polar heart rate sensor. For H/R
exercise, it is recommended to use wireless polar heart rate sensor.

1. Select HRC Mode

When you press HRC button, the message “SELECT WORKOUT / + ENTER” is displayed
on the screen.

2. Select ‘Fat Burn’ Exercise workout

Touch ‘ENTER/PAUSE’ button after selecting Fat Burn’ with SPEED / ’ button.

3. Set up Time
After the message “SET TIME” is displayed on the screen, the message “TM30” comes out to
indicate default exercise time is 30 minutes. Touch ‘ENTER/PAUSE’ button after setting up the
exercise time with ‘SPEED / ’ or numeric key. Next step is weight setup. you don’t press
‘ENTER/PAUSE’ but ‘START/STOP’ key, the striding belt starts moving.

Note - You can setup maximum exercise time in the manager mode.

4. Set up Weight
After the message “SET WEIGHT / + ENTER” is displayed on the screen, the message
“WT60” comes out to indicate the default user weight is 60kg. Touch ’ENTER/PAUSE’ button
after setting up user’s weight with ‘SPEED / ’ or numeric key. Next step is age setup. If you
don’t press ‘ENTER/PAUSE’ but ‘START/STOP’ key, the striding belt starts moving.

Note - When setting up weight with ‘SPEED / ’ button, the increment or decrement is
done with the resolution of 1kg. If you keep pressing ‘SPEED / ’ button for a
while, the weight value increase or decrease rapidly.

5. Set up Age
After the message “SET AGE / + ENTER” is displayed on the screen, the message “AG35”
comes out to indicate the default user age is 35. Touch ‘ENTER/PAUSE’ button after setting up
user’s age with ‘SPEED / ’ or numeric key.

M990T SERIES 23
 All manuals and user guides at all-guides.com

M990T SERIES

6. Set up Target Heart Rate

After the message “SET HEARTRATE / + ENTER”, heart rate value 148 will be displayed
on the screen as a recommended THR for 35 years old user. If you want to change the
recommended THR, touch ‘ENTER/PAUSE’ button after adjusting the THR with‘SPEED / ’
button.

- Target heart rate depends on user’s fitness condition. Make sure to consult with
Note
doctor to set up more suitable target heart rate.

7. Start exercise
When the message “PRESS START” is displayed on the screen, Press ‘START/STOP’ key.
After the striding belt starts moving, you can change the speed anytime during a workout.

Note - Treadmill operates at the speed of 1.0km/h. During a workout, the incline cannot be
adjusted manually and INCLINE / button‚ is used to adjust ‘Target Heart Rate’
- Whenever you touch INCLINE / one time, the target heart rate is increased or
decreased by the resolution of 1. The changed target heart rate is displayed on the screen.

8. Cardiovascular Exercise
After 3 minutes for warming up, “START HEART RATE EXERCISE” scrolls and Fat Burn
course starts.

9. Adjust speed and THR

If you needs, adjust the speed and Target Heart Rate anytime with ‘SPEED / ’ key, and
‘INCLINE / ’ key respectively.

Note - Your actual heart rate is detected every 5 seconds and the incline is automatically
adjusted to maintain your heart rate at target heart rate.

Actual heart rate Target heart rate - 11

Incline increases by 2% in 15seconds.
Target heart rate -10 Actual heart rate Target heart rate – 6
Incline increases by 2% in 15seconds.
Target heart rate - 5 Actual heart rate Target heart rate - 3
Incline increases by 1% in 15 seconds.
Target heart rate - 2 Actual heart rate Target heart rate + 2
No adjustment in incline
Actual heart rate Target heart rate + 3
Incline decreases by 2% in 15 seconds.

10. Stop exercise

When exercise time is over or ‘START/STOP’ key is touched, it stops operation.

24 MOTUS
 All manuals and user guides at all-guides.com

M990T SERIES

Goal-oriented mode has 3 kinds of program, DISTANCE, CALORIES, and TIME. You can choose
and exercise one of them. Each exercise ends automatically once each goal (DISTANCE,
CALORIES, and TIME) is met.

(A) Distance Goal Exercise

1. Select Goal oriented Mode

When you press MANUAL button, the message “SELECT WORKOUT / + ENTER” is
displayed on the screen.

2. Select Distance Goal Course

Touch ‘ENTER/PAUSE’ button after selecting ‘DISTANCE’ of goal oriented programs with
’SPEED / ’ button. If you don’t press ’ENTER/PAUSE’ but ’START/STOP’ key, the striding belt
starts moving.

3. Set up Distance Goal

After the message ”SET DISTANCE / + ENTER” is displayed on the screen, the message
“DT05” comes out to indicate default goal distance is 5km. Touch ‘ENTER/PAUSE’ after setting
up the exercise distance with ‘SPEED / ’ or numeric key. If you don’t press ‘ENTER/PAUSE’
but ‘START/STOP’ key, the striding belt starts moving.

4. Set up Weight
After the message “SET WEIGHT / + ENTER” is displayed on the screen, the message
‘WT060” comes out to indicate default user weight is 60kg. Touch ‘ENTER/PAUSE’ button after
setting up user’s weight with ’SPEED / ’ or numeric key. If you don’t press ‘ENTER/PAUSE’
but ‘START/STOP’ key, the treadmill starts to operate only with distance setting. The default
weight, speed and incline is applied.

Note - When setting up weight with ’SPEED / ’ button, the value changes with the
resolution of 1kg. If you keep pressing ’SPEED / ’ button for a while, weight
value increase or decrease rapidly.

5. Set up speed
After the message “SET SPEED / + ENTER” is displayed on the screen, the message P05”
comes out to indicate default speed is 5km/h. Touch ETER/PAUSE’ button after setting up the
exercise speed with ‘SPEED / ’ or numeric key. If you don’t press ‘ENTER/PAUSE’ but
‘START/STOP’ key, the treadmill starts to operate only with distance and weight setting. The
default speed and incline is applied.

M990T SERIES 25
 All manuals and user guides at all-guides.com

M990T SERIES

6. Set up Incline
After the message “SET INCLINE / + ENTER” is displayed on the screen, the message
“IN00” comes out to indicate default incline is 0%. Touch ‘ENTER/PAUSE’ button after setting up
the incline with ‘SPEED / ’ or numeric key. At this time, if you don’t press ‘ENTER/PAUSE’ key

m
but ‘START/STOP’ key, the treadmill starts to operate without incline setting. (Other settings
surch as distance, weight, and speed are duly applied)

.co
7. Start exercise
When the message PRESS START is displayed on the screen, Press ‘START/STOP’ key
and start exercise. You can adjust the speed and the incline anytime with ‘SPEED / ’ and
’INCLINE / ’ key, respectively.
es
8. Stop exercise
When exercise time is over or distance goal is met, exercise ends.
uid

(B) Calorie Goal Exercise

1. Select Goal oriented Mode

When you press MANUAL(GOAL) button, the message “SELECT WORKOUT / + ENTER”
displays on the screen.
-g

2. Select Calories Goal Course

all

Touch ‘ENTER/PAUSE’ button after selecting ‘CALORIES’ of goal oriented programs with
‘SPEED / ’ button. If you don’t press NTER/PAUSE’ but ‘START/STOP’ key, the striding belt
starts moving.

3. Set up Calorie Goal

After the message “SET CALORIE + ENTER” is displayed on the screen, the message
“Cal20” comes out to indicate default goal calorie is 200cal. Touch ‘ENTER/PAUSE’ button after
setting up goal calorie with ‘SPEED / ’ or numeric key. If you don’t press ‘ENTER/PAUSE’ but
‘START/STOP’ key, the striding belt starts moving.

26 MOTUS
 All manuals and user guides at all-guides.com

M990T SERIES

4. Set up Weight
After the message “SET WEIGHT / + ENTER” is displayed on the screen, the message
“WT60” comes out to indicate default user weight is 60kg. Touch ‘ENTER/PAUSE’ button after
setting up user’s weight with ‘SPEED / ’ or numeric key. If you don’t press ‘ENTER/PAUSE’
but ‘START/STOP’ key, the treadmill starts to operate only with calories setting. (The default
weight, speed, and incline are duly applied)

Note - When setting up weight with SPEED / button, the value changes with the
resolution of 1kg. If you keep pressing weight value increase or decrease rapidly.

5. Set up Speed
When the message “SET SPEED / + ENTER” is displayed on the screen, the message
“SP05” comes out to indicate default the speed is 5km/h. Touch ‘ENTER/PAUSE’ button after
setting up the speed with ‘SPEED / ’ or numeric key. If you don’t press ‘ENTER/PAUSE’ but
‘START/STOP’ key, the treadmill starts to operate only with the setting of the calories and weight.
(The default speed and incline are duly applied)

6. Set up Incline
When the message “SET INCLINE / + ENTER” is displayed on the screen, the message
“IN00” comes out to indicate default incline is 0%. Touch ‘ENTER/PAUSE’ button after setting up
incline with ‘SPEED / ’ or numeric key. If you don’t press ‘ENTER/PAUSE’ but ‘START/STOP’
key, the treadmill starts to operate without Incline setting. (Other settings such as calorie, weight,
and speed are duly applied)

7. Start Exercise
When the message “PRESS START” is displayed on the screen, Press ‘START/STOP’ key
and start exercise. You can adjust the speed and the incline anytime with ‘SPEED / ’ and
‘INCLINE / ’ key, respectively.

8. Stop Exercise
When exercise time is over or calories burned reaches goal calories, exercise ends.

M990T SERIES 27
 All manuals and user guides at all-guides.com

M990T SERIES

(C) Time Goal Exercise

1. Select Goal oriented Mode

When you press MANUAL button, the message “SLECT WORKOUT / + ENTER” is
displayed on the screen.

2. Select Time Goal Course

Touch ‘ENTER/PAUSE’ button after selecting “TIME’’ of goal oriented programs with ‘SPEED
/ ’ button. If you don’t press ‘ENTER/PAUSE’ but ‘START/STOP’ key, the striding belt starts
moving.

3. Set up Time Goal

After the message “SET TIME / + ENTER” is displayed on the screen, the message
“TM30” comes out to indicate default time goal is 30 minutes. Touch ‘ENTER/PAUSE’ after setting
up the exercise goal time with ‘SPEED / ’ or numeric key. If you don’t press ‘ENTER/PAUSE’
but ‘START/STOP’ key, the striding belt starts moving.

4. Set up Weight
After the message “SET WEIGHT / + ENTER” is displayed on the screen, the message
“WT60” comes out to indicate default user weight is 60kg. Touch ‘ENTER/PAUSE’ button after
setting up user’s weight with ‘SPEED / ’ or numeric key. If you don’t press ‘ENTER/PAUSE’
but ‘START/STOP’ key, the treadmill starts to operate only with time setting. (The default weight,
speed and incline are duly applied)

Note - When setting up weight with SPEED / button, the value changes with the
resolution of 1kg. If you keep pressing weight value increase or decrease rapidly.

5. Set up Speed
When the message “SET SPEED / + ENTER” is displayed on the screen, the message
“SP05” comes out to indicate default speed is 5km/h. Touch ‘ENTER/PAUSE’ button after setting
up speed with ‘SPEED / ’ or numeric key. If you don’t press ‘ENTER/PAUSE’ but
‘START/STOP’ key, Exercise starts only with the setting of time and weight. (The default speed
and incline are duly applied)

28 MOTUS
 All manuals and user guides at all-guides.com

M990T SERIES

6. Set up Incline
When the message “SET INCLINE / + ENTER” is displayed on the screen, the message
“IN00” comes out to indicate default incline is 0%. Touch ‘ENTER/PAUSE’ button after setting up
incline with ‘SPEED / ’ or numeric key. If you don’t press ‘ENTER/PAUSE’ but ‘START/STOP’
key, Exercise begins without incline setting. (Other settings such as calorie, weight, and speed are
duly applied)

7. Start Exercise
When the message “PRESS START” is displayed on the screen, Press ‘START/STOP’ key
and start exercise. You can adjust the speed and incline any time with ‘SPEED / ’ and
‘INCLINE / ’ key, respectively.

8. Stop Exercise
When exercise time is over, exercise ends.

M990T SERIES 29
 All manuals and user guides at all-guides.com

M990T SERIES

1. Quick Start
‘START/STOP’ ‘SPEED ‘ / ’ ‘INCLINE / ’ ‘START/STOP’
(If the final speed is over 8km/h, exercise ends after Cool Down)

2. Preprogrammed Mode
‘PROGRAM’ Select program profile ‘ENTER/PAUSE’ Set up time ‘ENTER/PAUSE’
Set up weight ‘ENTER/PAUSE’ ‘START/STOP’ Exercise starts ‘SPEED or INCLINE /
’ ‘START/STOP’ (If the final speed is over 8km/h, exercise stops after cool Down.)

3. Custom program
‘CUSTOM’ Select CUSTOM Mode ‘ENTER/PAUSE’ Set up speed profile (with ‘SPEED
’ ‘ENTER/PAUSE’) Set up incline profile (with ‘SPEED ’ ‘ENTER / PAUSE’) Save
edited program (with ‘ENTER/PAUSE’)

4. HRC Mode
‘HRC’ Select HRC program Set up time ‘ENTER/PAUSE’ Set up weight ‘ENTER/PAUSE’
Set up age Set up heart rate ‘START/STOP’ Exercise starts Adjust speed (with ‘SPEED
’) and Target Heart Rate (with ‘INCLINE ’) ‘START/STOP’ (If the final speed is over 8km/h,
exercise ends after Cool Down)

When you want to stop the treadmill for a while, press ‘ENTER/PAUSE’ button during a workout.
During pause mode, exercise information is kept.

How to use pause mode

1) When you press ‘ENTER/PASUSE’ key during exercise, pause mode is maintained for the pause time club
manager preset in the manager mode. (Default time is 2minutes)
2) If you press ‘ENTER/PAUSE’ key within the pause time (2minutes) or you press ‘START/STOP’ key, exercise ends.
3) When you press ‘ENTER/PAUSE’ key for 5 seconds with in the pause time, exercise restarts with 8 times beep.

Note - You can set up Pause time from 1 to 10 minutes in Manager Mode.

30 MOTUS
 All manuals and user guides at all-guides.com

M990T SERIES

Manager mode helps club manager to manage the treadmill more conveniently.

m
Item Default Value Description
WORKOUT DURATION 30 [Min] Set up maximum exercise time from 10 to 99 minutes

M990T 21 [km/h] Set up maximnum speed from 8 to 21km/h

MAXIMUM SPEED

.co
M995T 16 [km/h] Set up maximnum speed from 8 to 16km/h
MEASUREMENT UNIT 0 Set up display unit of speed / distance 0 : km, 1: miles
Set up pause time from 1 to 10 minutes. During pause time,
PAUSE TIME 2 [Min] exercise information is not deleted, and displayed on the screen
Display accumulated distance so far.
ACTUAL
Actual accumulated distance = display value X 10[km]
TOTAL DISTANCE ACCUMULATED
DISTANCE
If total accumulated distance is more than 100,000km, the 6th digit
es
is displayed in the left window(FND) next to the display
Display accumulated time so far.
ACTUAL
TOTAL TIME ACCUMULATED TIME If total accumulated time is more than 10,000 hours, the 5th digit is
displayed in the left window(FND) next to the display

LUBRICATION Set up lubrication amount that lubrication system automatically

30 [cc] lubricates every lubrication interval. The amount range is from 10
uid

INTERVAL
to 60cc.
Set up lubrication interval between 100 and 2,000 km.
LUBRICATION AMOUNT 500[km]
Lubrication interval = display value X 100[km]

ERROR LOG - Save and display error log.

SOFTWARE VERSION VER. Display treadmill’s Software version.

-g

How to use manager mode

1) Press the buttons in the order of ‘SPEED / ’, ‘INCLINE / ’, ‘ENTER/PAUSE’ on display
console.
2) The message, “MANAGER MODE”, is displayed on the screen, and manager mode is activated.
all

If you press ‘ENTER/PAUSE’ key when “MANAGER MODE” message is displayed, you can
escape from the manager mode.
3) Whenever user presses ‘SPEED / ’ key, each items is displayed in turn as below.
WORKOUT DURATION MAXIMUM SPEED MEASUREMENT UNIT PAUSE TIME
TOTAL DISTANCE TOTAL TIME LUBRICATION AMOUNT LUBRICATION INTERVAL
ERROR LOG SOFTWARE VERSION SYSTEM CONTROL WORKOUT DURATION
4) After selecting an item and pressing ‘ENTER/PAUSE’ key, change the value as you want with
‘SPEED / ’ key or numeric key. After completing setting up, press ‘ENTER/PAUSE’ key.
5) If you want to change another items, please repeat from procedure 3. If you want to get out of
manager mode, press ‘ENTER/PAUSE’

Note - Refer to Auto-Lubrication System as far as lubrication amount is concerned.

M990T SERIES 31
 All manuals and user guides at all-guides.com

M990T SERIES

1) During exercise, you can enjoy TV, DVD,

VTR and etc. And you can control channel or
volume with the buttons in the right side of
LCD screen.

2) If you want to turn off the screen, press

POWER ON/OFF button at the right-bottom
side of the LCD screen.

3) You can enjoy the sound or music with

headset that Motus provides. Headset jack is
: A/V terminal, 3 RCA jacks located in the left down on display console.
(Red and white are for sound, yellow is for image)
: S-VIDEO terminal
: Stereo jack
: 75-Ohm F-connector (coaxial connector)

To enjoy music from your personal MP3 player, please

follow directions below.

1) Connect output signal from MP3 player to upper jack of

the left down on display console.

2) Connect head phone Motus provided to lower jack to

the left down on display console.

32 MOTUS
 All manuals and user guides at all-guides.com

M990T SERIES

The proper use and safety of the treadmill can be maintained only if it is examined regularly for
damage or wear. You as club manager or owner are responsible for maintenance tasks. Stop using
the treadmill until defective parts are repaired or replaced.
Pay attention to parts that is subject to wear, especially in the striding belt, deck and line cord.
Perform a proper lubrication periodically to keep the friction between the striding belt and deck low.
It is very important to prolong the lifetime of the striding belt and deck. Refer to section IV
Management of Product, titled Instruction for the use of lubrication oil.
Vacuum the floor surrounding and underneath the treadmill every week to prevent the accumulation
of dust and dirt.
Clean the display console and all exterior surfaces regularly with soft cotton cloth dampened in a
mild soap and water or a mild household cleaner. Never pour water or spray liquids directly on the
surface of the treadmill. Do not use ammonia, acid based cleaners, abrasive cleaner and paper
towels.
Check operation of the emergency stop system daily after turning on the treadmill.
Check and vacuum around the striding belt every week to keep debris from accumulating
Check make sure the treadmill is properly leveled. Refer to section IV Management of Product,
titled Level Adjustment.
Check make sure striding belt drifts off center. Refer to section IV Management of Product, titled
Striding Belt Adjustment.
When treadmill is not in use for a long time, turn it off and keep the power cord unplugged from the
wall outlet.
When you move the machine, be careful not to collide with obstacles like a wall.

Malfunction Probable cause (Condition) Corrective Action

Normal protective function. Refer to section “Protective function” and then
(E°‡°‡ is displayed on Console Display.) eliminate the cause.
Striding belt does
not move Check electrical connection between MPU
RS485 connection is loose. board on Console and motor controller under
(Normal display.) motor hood.
Power ON/OFF switch. Turn on power on/off switch
Check circuit breaker is tripped. If tripped, a
white button has popped out. Press the white
No power button to reset the circuit breaker. The circuit is
(No display located next to power ON/OFF switch on the
on Console) Tripped circuit breaker. outside of the treadmill.
In the United States and Canada, circuit breaker
is combined with power ON/OFF switch.
If tripped, the switch is turned to OFF position.

M990T SERIES 33
 All manuals and user guides at all-guides.com

M990T SERIES

Malfunction Probable cause (Condition) Corrective Action

No power Check if power exists at wall outlet and at
(No display Power connection. treadmill, respectively. Check if line cord is
on Console) damaged.
3-pin connector is loose on power board or
No display 3-pin connector is loose on power board or MPU
MPU board of Display Console.
on Console board of Display Console.
(Power connection is normal.)
Level or balance treadmill. (Refer to section
“Level Adjustment”)
Striding belt drifts off
center Uneven floor surface Align striding belt by using belt adjustment bolt
after Level Adjustment.
(Refer to section ”Striding belt alignment”)
Adjust the belt tension.
Striding belt slips Belt tension is loose.
(Refer to section ”Belt Tension adjustment”)
Electrostatic discharge Striding belt is worn away. Replace the striding belt with new one.

Check if the lubrication is proper by pushing

Manual lubrication is not sufficient. striding belt with a foot while grasping side
handlebar. If insufficient, apply lubrication.
Check if the lubrication is proper by pushing
Maximum speed is Automatic lubrication system striding belt with a foot while grasping side
reduced does not work. handlebar. Verify lubricant tank is not empty, or
lubrication system works well.
The deck laminate worn through or the
underside of striding belt became Replace belt and deck.
hard or glossy.
Find unstable connection at electrical outlet and
Unstable power connection
at treadmill
Treadmill resets
or pauses Insufficient power source Plug treadmill into a dedicated 20-amp circuit.
randomly
Magnetic switch for emergency stop is not
Mount magnetic switch in position.
firmly attached.
Chest strap electrodes are not wet enough Dampen the Chest strap electrodes with tap
to sense accurate heart rate. waters.
Heart rate reading using
wireless Chest strap electrodes are not laid flat or Make sure the chest strap electrodes lies flat
chest strap is horizontally across your skin. and horizontally across your skin.
erratic or not Chest strap electrodes are not within 80cm Make sure the chest strap is within 80cm from
displayed from heart rate receiver. heart rate receiver.

Chest strap battery is discharged. Replace chest strap or the battery.

Electromagnetic interference from television

Keep the treadmill away from the probable
sets, cell phones, refrigerator, or motor
cause until the heart rate readings are accurate.
Heart rate reading is driven exercise equipment.
abnormally high
Electromagnetic interference from another Keep another chest strap away until the heart
chest straps. rate readings are accurate.

34 MOTUS
 All manuals and user guides at all-guides.com

M990T SERIES

If a treadmill stops suddenly, there will be some protective function. This is normal function to protect
the treadmill. As the result of protective function, a code indicating the cause of error is displayed on
the display console and the display panel of INVERTER, which is located under motor hood. Motor is
driven directly by INVERTER according to the command from the console.
If this protective function occurs, turn off the treadmill and then turn on the treadmill after 20 seconds
even though the cause is solved. The treadmill stop due to protective function will remain unsolved if
you turn on the treadmill within 20 seconds after turning off the treadmill.

Protective Function
Probable Cause or Description Display
Name

Excessive current flows in INVERTER.

Overcurrent E04
The output of INVERTER is short or the motor is stalled.

Motor is overloaded, which is judged by detecting INVERTER output E05

Overload
current.

Unexpected high voltage is detected at DC voltage of INVERTER.

1) Input voltage of INVERTER is too high.
Overvoltage E07
2) Regenerative energy from motor is too much.
Don’t push the striding belt backward compulsorily by foot.

Communication
Trouble in internal memory due to external noise or high temperature. E60
Error

Unexpected low voltage is detected at DC voltage of INVERTER.

Low voltage 1) Input voltage of INVERTER is too low. E09
2) Instantaneous power failure

Excessive current flows in INVERTER when the output of INVERTER is

Short-circuited output E34
short

Trouble in internal EEPROM due to external noise or high temperature. A

EEPROM E08
lot of parameters are saved in the EEPROM. Contact with MOTUS.

Tripped out
Failure caused intentionally by input terminal. It is not implemented in the
from external E12
treadmill.
signal

Earth fault Grounding protection when an INVERTER output line dropped to earth. E14

High temperature The temperature of power module in INVERTER is too high. E21

M990T SERIES 35
 All manuals and user guides at all-guides.com

M990T SERIES

1. Check if the running surface of treadmill is even with the ground.

m
A BUBBLE LEVEL can be used as shown in the figure.

- It may be impossible to adjust incase of bumpy ground condition

.co
es
2. How to use Adjustable rear foot
uid

Loosen the nut on the top of adjustable rear foot by turning it clockwise. Once the nut is loosened, adjust
it with hand to be leveled. After leveling, turn the nut counterclockwise and tighten it.
-g
all

- Adjusting height must be done while rear side of treadmill is lifted up. Must not adjust more
than 1/4 of entire adjustable rear foot’s height.

36 MOTUS
 All manuals and user guides at all-guides.com

M990T SERIES

The belt is properly aligned at the factory before shipment. However, while delivering or exercising,
the belt can be misaligned from the original center position. The correct alignment or striding belt is
critical to the smooth operation of the treadmill.

How to align
1. Balance the treadmill prior to any alignments if the striding surface of the treadmill
is not level.
The belt may move off center by using the treadmill on uneven surface.

2. Check belt s alignment

Check if the belt drifts off center or not while treadmill is operated with the speed of 5km/h for a
few minutes.
Keep in mind whether the belt is off center to which direction, left or right.

3. Take the following steps to align the striding belt on the treadmill.
3-1 Make sure the treadmill is OFF and the striding belt has completely stopped.
3-2 Find the right belt adjustment bolt in the rear end cap of the treadmill.
3-3 Make belt adjustments on right belt adjustment bolt using the 10 mm hex key wrench provided.
- If the belt is off center to the right, turn the adjusting bolt 1/4 turn clockwise, which moves
the striding belt to the left.
- If the belt is off center to the left, turn the adjusting bolt 1/4 turn counterclockwise, which
moves the striding belt to the right.

Important Do not turn the adjusting bolt more than 1/4 at a time. Over-tightening the bolt can damage the
treadmill.

3-4 Turn ON the treadmill, press START/STOP, and then operate the treadmill with the speed of 5km/h.
3-5 Observe the striding belt for a few minutes. The belt should be centered on the deck.
3-6 If you need additional alignment, repeat steps 3-1 through 3-5 of this procedure until the
belt is properly aligned.

CAUTION
If you hear any chafing, the belt is not
center-aligned or the belt appears to be
getting damaged, stop the treadmill and
contact authorized local dealer. Do not
exceed one full turn of the adjusting
Right End Cap
bolts in either direction. If the belt does
not appear properly centered after on
full turn, contact Motus local dealer. Roller

M990T SERIES 37
 All manuals and user guides at all-guides.com

M990T SERIES

1. After around 30 days from the shipment at factory, lubricate promptly according to the following
instruction.
2. Lubricant prevents the belt and deck from being damaged by frictional heat, which extends life
span of the deck and belt.
3. Lubricate more than twice a month. To judge proper lubrication timing, you can feel the friction
intensity by pushing the striding belt backward using your feet while holding the front handle
after turn OFF the treadmill.
4. Use the lubricant provided by Motus only.

1. Fill the lubricator with the oil Motus provided.

2. The conduction hole for the lubrication is at the right corner on the front of the treadmill as
shown in the picture.
3. Insert the pipe tip of the lubricant to the end through the conduction hole to spread out the
lubricant on the center of the belt.
4. Inject the lubricant into the conduction hole by squeezing the lubricator about 20 times under
the belt speed of 4km.
5. To spread out the lubricant all round on the belt, operate the treadmill for a few minutes.

A certain amount of oil is lubricated automatically every lubrication

interval which is preset at Manager mode. Default lubrication
amount and lubrication interval are set up to 30cc and 500km,
respectively, which can be set in Manager mode. Therefore, it is
recommended that fitness club manger set up the lubrication
amount and interval according to club condition.

38 MOTUS
 All manuals and user guides at all-guides.com

M990T SERIES

A volume of lubricant tank is about 270cc, and if residual amount of oil is less than 20%, the warning
SYMBOL is displayed on the screen with a beep. At that time, fill the tank as below instructions.

1) Turn OFF the treadmill and detach motor hood.

2) Open the cap of oil tank by turning it with hand.
3) Fill the empty tank fully with the oil provided by Motus. If oil is not filled full, automatic lubrication
system doesn’t work properly.
4) Close the cap of oil tank and put the motor hood in place.
5) Turn ON the treadmill. Message indicating oil lack will be still display on the screen with the beep.
6) To input “finishing oil-filling”, press buttons in the order as below.

‘INCLINE ’ -> ‘INCLINE ’ -> ‘SPEED ’ -> ‘SPEED ’ -> ‘ENTER’

Keep in mind that this step must be done after filling the tank fully.
7) The warning SYMBOL and beep disappears.)

Belt tension is properly adjusted before delivery. However, while exercising for a long time, the
tension can be loose.

- it is very important to keep belt’s tension constant for user’s safety

How to adjust
1) Turn on the treadmill, press START/STOP, and then operate the treadmill with the speed of 4km/h.
Walk on the treadmill. Tightly grip the front handlebar and apply force with feet on the striding near
the motor cover against the moving direction. If the belt slips, do steps from 2). If it does not slip,
the tension is proper.
2) Stop the treadmill for a safety during adjustment and prepare 10mm wrench. Do not adjust tension
while treadmill is in operation.

- If you adjust the belt tension when the treadmill is in operation, it is very dangerous because
sleeve or a part of body may be caught in roller or belt.

3) There are belt adjustment bolts in the rear end cap of the treadmill, which enables to adjust belt
tension. When turning this bolt, a position of roller moves back and forth. To move backward the
roller, turn the bolt clockwise. To move forward the roller, turn the bolt counterclockwise.

M990T SERIES 39
 All manuals and user guides at all-guides.com

M990T SERIES

4) Put 10mm wrench into the hole of the Right End Cap as below.
5) Turn the wrench 1/4 turn clockwise.
6) Put 10mm wrench into the hole of the Left End Cap as below.
7) Turn the wrench 1/4 turn clockwise.
8) Repeat steps 1) through 7) until the belt no longer slips. Do not exceed one full turn of the
adjusting bolts in either direction. Over-tightening of the bolts may over stretch and damage the
striding belt or roller bearings.

40 MOTUS
 All manuals and user guides at all-guides.com

M990T SERIES

m
.co
es
uid
-g
all

Specifications can be changed without notice for product improvement or quality.

M990T SERIES 41
 All manuals and user guides at all-guides.com

M990T SERIES

Customer Service

At your request for service, your dealer shall provide the service..

The gratuitous period of warranty shall be 2 years.

Since this period shall be calculated from the date that you purchase the product, you
shall have the date written on your guarantee.

If your date of purchase cannot be identified, the warranty period shall be added as from
the date of 2 months after the date of manufacture.

Consumables shall be paid for, though within the gratuitous warranty period.

Service parts shall be paid for 2 years after the cease of production.

Payable Service
The treadmill doesn’t have malfunction
- Please surely read user manual because user has to pay for that if the treadmill doesn’t
have malfunction.

Malfunction due to user’s fault

- User’s handling carelessness, Malfunction after user’s arbitrary repair, remodeling
- Malfunction or damage after unauthorized person’s repair

Others
- Malfunction or damage calamity (fire, damage from sea wind, flood and so on)
- Consumable parts

Consumables list : Running Belt, Running Deck, Pulley Belt

42 MOTUS
 All manuals and user guides at all-guides.com

MOTUS 990T SERIES

M990TL/M995TL

M990T/ M995T

Authorized Partner

Suite 401, Ilsan TechnoTown-A, 1141-1 Baekseok-dong, Ilsan-gu, Goyang-si, Gyeonggi-do, Korea.

www.motus.co.kr Tel) +82-31-905-3300 / Fax) +82-031-908-6588