MHL350 F-SERIES

MHL355 F-SERIES

TECHNICAL DATA
MHL 350 F | MHL 355 F
MATERIAL HANDLER

160 kW 33.0 – 40.9 t up to 16.0 m

 Reversing camera Quality in detail
and travel alarm
Anyone purchasing a material handling
Standard camera (with night machine from Terex ® Fuchs is not
vision function) offers significant just buying a first-class product. Our
advantages for safety and comfort. customers are receiving a German
The optional travel alarm warns work of engineering art. Our machines
people close to the vehicle with an are therefore characterized by high-
acoustic signal. This is activated quality, detailed solutions, even in
automatically once the machine places which are not immediately
starts to drive. obvious. A good example of this is
our solid, high-grade distributor block
which effectively prevents the hydraulic
pipes between the main control block
and the boom from bending.

02
 MHL350 F | MHL355 F

MHL350 – MORE THAN

ONE MATERIAL HANDLER
Terex® Fuchs F-Series Material Handlers –
benchmark for power and efficiency.

Sensitive hydraulic and application- F-Series material handler can be set to

oriented kinematics concept for efficient Power Mode, providing the operator with
power management. optimal power and speed for heavy-duty
Power is important. What is even more applications such as feeding the shredder,
important, is using that power efficiently loading / unloading trailers and rail cars, or
and purposefully. This is where the interplay magnet operation.
between the MHL350 F Material Handler’s However, tasks like cleaning the yard and
engine and hydraulics impresses with sorting material do not require 100 % power
striking performance data, as well as speed, demand from the engine, and by such
precision, and fuel efficiency. The hydraulic encountering less-demanding, medium-
system holds the reserves necessary for duty tasks, the operator can simply press
achieving quick work cycles, even under the Eco Mode. This delivers up to 27 % fuel
heavy loads. The work movements can savings over 100 % power, while still offering
be performed jolt-free with the clever high lifting and slewing rates.
kinematics concept, just as extremely When the material handler is performing
gentle yet highly precise maneuvers can be low-demand tasks such as sorting, the
executed. operator can choose to switch the machine
to Eco+ Mode to reduce engine RPM by
Featuring a three-stage power operation, up to 19 %, using 80 % of full engine horse-
that provides substantial fuel savings, power. This setting is designed to optimize
conveniently located on the machine’s fuel consumption, offering up to 36 % fuel
new multifunction button control panel, the savings cars, or magnet operation.

Low emission
preseves operators and nature
The MHL350 F-Series Material Handlers
are powered by a new 160 kW turbocharged
engine that uses selective catalytic
reduction (SCR) technologies to offer the
most advanced, reliable and fuel-efficient
method for meeting stringent emissions
regulations. Passive regeneration of the
diesel particulate filter (DPF) provides a
simple system.

03
 Up to 5.6 m
viewing height!

Driver’s cab
Adjustable with infinite variability
The spacious driver’s cab can be
moved upwards hydraulically, with
infinite variability up to a height
of 5.6 m. Soundproof and heat-
insulated large windows ensure ideal
circumferential visibility.

Ergonomic 7" touch display

driver’s seat With direct menu selection
Multi-position
The 7" graphical touch display also offers quick
adjustment
and clear illustrations of all displays. Simple
Flexible setting options, menu navigation is provided directly through the
head and lower lumbar display, which can be read without glare. The
support provide screen displays images of the integrated revers-
comfortable working ing camera and all important operating condi-
environment. tions, such as hydraulic oil temperature, coolant
temperature, and much more. The display can
be operated comfortably from the driver’s seat.

04
 MHL350 F | MHL355 F

EXPERIENCE THE IMPACT

OF UNIQUE PRODUCTIVITY.
Top performance and minimal consumption go together perfectly.

Handling all kinds of material can be so and driver enjoyment. In particular, the
easy and fast – if you rely on innovations overhauled hydraulics concept by every day
made by Terex® Fuchs. operations offers more speed and efficiency.
These properties distinguish the The driver controls this powerhouse
Terex® Fuchs MHL350 F Material Handler. securely and precisely in the comfort cab,
When developing the new generation, which provides a pleasant and ergonomic
we placed special attention on driving working environment.

– 99 %
160 kW inside! diesel particles
One of the most
efficient consumption
in its class.

The core element: 160 kW diesel engine

Extremely economical and up to 99% less diesel
particles compared with the previous model
# Lower fuel consumption
# Optional start/stop automatics
# Reduced exhaust emissions compared to Tier IV interim
# Diesel particle filter and AdBlue injection
# Multi-function button
# Three work modes: Eco Plus / Eco / Power
# Proven and robust exhaust gas cleaning system (SCR)
and passive regeneration (DPF)

Multifunction Button
# ECO Mode
# ECO+ Mode
# Power Mode (100 %)

Fine Mode operation

Using of Fine Mode in addition
to Eco, Eco+, Power Mode
reduces speed for delicate
handling operations and precise
maneuvering.

www.terex-fuchs.com 05
 THE NEW F-SERIES.
THE FUTURE OF MATERIAL
HANDLING IS NOW.
Brand new design meets brand new features.

06
 MHL350 F | MHL355 F

The new MHL350 F Material Handler sets new generation of Terex ® Fuchs loading
standards in modern technology with machines. The new design with classic
more sophisticated hydraulics and an Fuchs-style elements combined with the
exceptionally comfortable driver’s cabin. latest technologies embodies the symbiosis
Through a combination of power and low of tradition, quality, and innovative spirit.
fuel consumption, as well as the powerful More than ever the MHL350 F Material
yet sensitive hydraulics, demanding loading Handler is the symbol for economy and
tasks can be completed efficiently. The robustness for deployment in scrap yards.
MHL350 F Material Handler represents the

Constant cooling Air conditioning

The cooling system with two physically Climate control condenser is separated
separated radiators keeps the operating from the main cooling system and dust-
temperature of the machine, especially protected. With its own fan, the cooling
at high ambient temperatures, at an system is independent of engine speed
ideal level. The radiators are designed and thus highly efficient.
for easy maintenance and exceptional
cooling performance.

www.terex-fuchs.com 07
Further advantages of the MHL350 F.

Terex Fuchs tool filter

Effective protection against
hydraulic oil contamination
Clean hydraulic oil extends the service life of
all hydraulic components many times over, thus
saving costs. This is why we at Terex Fuchs pay
special attention to the purity of the hydraulic
system.
With the optional tool filter, system impurities such
as those that can arise when attachments are
changed frequently can be effectively avoided.
The system has been specially developed
together with a supplier for use on our loading
machines. The filters clean the hydraulic oil which
flows back from the attachments just in front of
the main control block. The system is, of course,
monitored electronically.

CAN Bus system

With CAN Bus technology, Terex ® Fuchs established a
well-known automotive standard in all loading machines,
years ago. The high transmission rates enable continuous
diagnosis of the main control components in real time.
Remote diagnostics via telematics and flexibility by
optional equipment is therefore a children’s playground –
with CAN you can.

Another advantage
of the modern Terex® Fuchs electrical
Just in case: with our innovative backup rapid test a blown
fuse can be located quickly and easily even under difficult
lighting conditions. Innovation which is properly done.

Reliable technology
and ease of servicing
Terex® Fuchs exclusively uses high-quality
components from leading suppliers for its
machines. This guarantees a high level of quality
and reliability.
The unique service platform simplifies daily
machine checks considerably. Main components
such as the engine, diesel, AdBlue and hydraulic oil
tanks, etc. can be reached from the platform easily
and above all safely.
Added safety and ease of servicing for you.

08
 MHL355 F

STANDS STRONG. WORKS HARD.

ACHIEVES MORE.
Excellence is best based on a solid foundation.

MHL355 F with the extended

undercarriage allows even more stability.

www.terex-fuchs.com 09
MHL350 F | MHL355 F | Technical data

TECHNICAL DATA
SERVICE WEIGHT WITHOUT ATTACHMENT UNDERCARRIAGE MHL355 F
MHL350 F 33.0–35.5 t Front axle Planetary drive axle with integrated drum brake,
rigidly mounted,max. steering angle 27°
MHL355 F 36.0–40.9 t
Rear axle Oscillating planetary drive rear axle with integrated
drum brake and selectable oscillating axle lock
DIESEL ENGINE Stabilizers 4-point stabilizer system
Manufacturer and model Deutz TCD 6.1 L6
Tires Solid rubber, 8-ply 12.00-24
Design 6-cylinder inline
Engine control EMR IV BRAKE SYSTEM
Type 4-stroke diesel, common rail direct injection, Service brake Hydraulic single-circuit braking system
turbocharger, controlled exhaust gas recirculation, acting on all four wheel pairs
diesel particulate filter with automatic regeneration
and SCR-cat automatic regenerationcat Parking brake Electrically operated disc brake on transmission
acting on both front and rear axles
Engine output 160 kW
Nominal speed 2000 rpm
HYDRAULIC SYSTEM
Displacement 6,057 cm3
LINDE mobile hydraulic system with load limit control and fuelsaving power demand
Cooling system Combi-cooler (coolant/ charge air) with fan speed control. Separate hydraulic oil cooler, temperature-controlled fan speed
control, system; optional reversing function
Hydraulic oil filter Integral return filter in oil tank for work hydraulics,
Emission standard Stage IV/EPA Tier final with 3000 operating hours service interval
Air filter design Two-stage filter with safety cartridge and pre- Max. pump capacity 2 × 330 l/min
separator with discharge valve
Max. operating pressure 320 / 360 bar
Usable tank capacity 315 l Diesel + 32 l Ad Blue
Hydraulic oil tank 535 l usable tank capacity

ELECTRICAL SYSTEM OPERATOR’S CAB

Generator 28 V / 100 A
Cab raising system Infinitely variable hydraulic height-adjustment with eye
Operating voltage 24 V 24 V level up to 5.60 m above ground. Flexibly mounted.
Sound-insulated; heat-insulating glass panoramic
Battery 2 × 12 V / 110 Ah / 750 A (in accoordance with EN) windows for optimum all-around view; windshield
Lighting set 2 × H3 headlamps, turn indicators and tail lights with pull-down sunblind that slides under the cab roof;
viewing window on cab roof; sliding window in cab
Option 13 kW or 20 kW DC generator with controls and door; height and tilt-adjustable steering column
insulation monitoring, driven by V-belt direct from
diesel engine Heating Infinitely variable heating with 3-speed fan, 6 adjustable
defroster nozzles (hot water system)

TRANSMISSION
Operator’s seat Air-cushioned high-comfort seat with integrated
headrest, safety belt and lumbar support, seat heating
with integrated a/c function optional. Seat position, seat
Hydrostatic travel drive via infinitely variable axial piston motor with directly mounted inclination and seat cushion multi-adjustable relative
travel brake valve, two-speed manual gearshift, 4-wheel drive to position of armrests and pilot control units, allowing
Maximum speed 1st gear max. 5 km/h fatigue-free operation

Maximum speed 2nd gear max. 20 km/h Monitoring Ergonomic layout; glare-free instrumentation.
Multifunction display, automatic monitoring and
Gradeability max. 39 % recording of abnormal operating conditions (including
all hydraulic oil filters, hydraulic oil temperature (cold /
Turning radius 8.0 m hot) – coolant temperature and charge air temperature
– condition of cooling system, diesel particulate filter
load), visual and audible warning indication with
SLEWING GEAR shutdown of pilot control/ engine power reduction.
Diagnosis of individual sensors available via the multi-
Swing gear Internally toothed double-row ball ring gear function display. Rear view camera"
Drive 3-stage planetary gear Air conditioning Automatic
with integrated multi-disc brake
Acoustic power level LW(A) = 101 dB(A) (guaranteed)
Upper carriage swing speed Infinitely variable from 0–7 rpm in accordance with directive 2000/14 EC;
Swing brake Electrically operated max allowable under 2000/14 EC = 104 dB(A)

Max. pivot torque 80 kNm

OFFICIAL HOMOLOGATION
UNDERCARRIAGE MHL350 F Certifi ed in accordance with CE regulations

Front axle Planetary drive axle with integrated drum brake,

rigidly mounted,max. steering angle 27°
Rear axle Oscillating axle with integral drum brake
and selectable oscillating axle lock
Stabilizers 4-point stabilizer system
Tires Solid rubber, 8-ply 12.00-20

10
 MHL350 F | MHL355 F

EQUIPMENT
ENGINE STANDARD OPTION CAB STANDARD OPTION
Charge air cooling Hydraulically adjustable cab
Direct electronic fuel injection/common rail 3-layer glass with protection film
Automatic idle Sliding window in cab door
Engine preheating Glazed roof panel
Engine diagnostics interface Reinforced glass (windscreen and roof panel)
System-controlled fan drive with fan speed monitoring Windscreen washer system
Windshield washer system (lower portion of windshield)
UNDERCARRIAGE Air-cushioned operator seat with headrest, seatbelt,
and lumbar support
All-wheel drive with differential
Seat heating with integrated A/C function
Drum brakes
Steering column, height and tilt adjustable
Rear axle oscillating lock
Automatic air conditioning system
2-speed powershift transmission
Independent heating system
4-point stabilizers
Multi-function display
Stabilizer cylinders with integrated two-way check valves
Document clip
Piston rod protection on stabilizer cylinders
Protective grilles to front and roof
Stabilizer plates 510 × 665 mm
12 V transformer
4-point stabilizers, individually controllable
Radio CD & USB
Tool box
12 V socket
Special paint (customer paint work)
Fire extinguisher, dry powder

UPPERCARRIAGE Rotating beacon

Separate cooling systems

(combi-cooler for engine and hydraulic oil cooler) EQUIPMENT
Cooling system fan speeds controlled 13 kW DC generator with controls
by operating parameters
20 kW DC generator with controls
Fan drive reversing function
Close proximity range limiter for dipperstick
Lockable maintenance hatches, with gas struts
Coolant and hydraulic oil level monitoring system
Automatic central lubrication system
Filter system for attachments
Rear view camera
Hose rupture value for boom cylinder
Travel alarm
Hose rupture value for stick cylinder
Electric refuelling pump
Overload and work area control
Lighting protection
Overload warning device
Special paint (customer paint work)
Quick coupling on dipperstick
Cyclone prefilter
Dipperstick impact protection
Active cyclone prefilter (TOP AIR)
Hydraulic oil preheating 230 V
Float switch
Joystick steering
Lubrication of the grab suspension
by central lubrication system
Light packages H3 or LED
H3 front headlights
Terex ® Fuchs Telematics System

Further optional equipment available on request!

www.terex-fuchs.com 11
MHL350 F | Technical data

DIMENSIONS MHL350 F
All dimensions in mm

2870

195

3425
2750
1470
450

3000

5620

2850
550
330

1780 1895 3000

2990

4370

4800

12
 MHL350 F

TRANSPORT DIMENSIONS MHL350 F

With dipper stick | All dimensions in mm

195

3400
C

2020 1720
Average center of gravity in
transport position
B 1350

Dimensions Reach 16.0 m Reach 15.0 m

A 12,570 mm 12,610 mm
B 5,610 mm 6,450 mm
C 3,600 mm 3,020 mm

Reach 14.7 m | With multi-purpose stick | All dimensions in mm

195

3400
3040

2020 1720
Average center of gravity in
transport position
6380 1350

12610

MHL350 F AND MHL355 F MATERIAL HANDLER:

LOADING SYSTEMS WITH DIPPERSTICK OR MULTI-PURPOSE STICK
MHL350 F MHL350 F MHL350 F MHL355 F
Component 16.0 m 15.0 m 14.7 m with MPS 16.0 m
Straight boom 8.5 m
Dipperstick 6.2 m
Dipperstick 7.2 m
Multi-purpose stick 5.6 m

www.terex-fuchs.com 13
MHL350 F | MHL355 F | Technical data

MHL350 F: WORKING RANGES / CARRYING CAPACITY

18

17

REACH 16 M WITH DIPPER STICK 16

Loading equipment Boom 8.5 m 15

Dipper stick 7.2 m 14

Cactus grab 13

12

RECOMMENDED ATTACHMENTS 11

10
Terex ® Fuchs cactus grab 0.6 m 3 Open or half-closed
9
Terex ® Fuchs magnetic plate MP 1150 dia = 1150 mm with 13 kW magnet system 8

Clamshell grab 1.0 m 3 Density of materials handled up to 800 kg/m3 7

1
The lift capacity values are stated in metric tons (t). The pump pressure is 360 bar.
0
In accordance with ISO 10567 the lift capacity values represents 75% of the static

Rotation center
tipping loads or 87% of the hydraulic lifting force (marked °). On solid and level ground -1
the values apply to a swing range of 360°. The (…) values apply in the longitudinal
-2
direction of the undercarriage. The values for “not supported” only apply via the
steering axle or the locked oscillating axle. The weights of the attached load hoisting -3

equipment (grab, load hock, etc.) must be deducted from the lift capacity values. The -4
working load of the lifting devise must be observed. In accordance with the EN 474-5
for object handling application hose rupture valves on the boom and stick cylinders, an -5

overload warning device and the lift capacity table in the cab are required. For object -6
handling application the machine has to be supported on a level ground.
-7
18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

 Reach in m

Undercarriage
Height [m] outrigger
Reach [m]
4.5 6 7.5 9 10.5 12 13.5 15
not supported (4.2°)
16.5
4-point supported 4.2° (4.2°)
not supported (4.6°) (3.3°)
15
4-point supported 4.6° (4.6°) 3.3° (3.3°)
not supported (4.7°) (3.5°)
13.5
4-point supported 4.7°(4.7° 3.5° (3.5°)
not supported (5.4°) (4.3) (3.2°)
12
4-point supported 5.4° (5.4°) 4.6° (4.6°) 3.2° (3.2°)
not supported (5.7) (4.3) (3.4) (2.6°)
10.5
4-point supported 5.9° (5.9°) 5.3° (5.3°) 4.3° (4.3°) 2.6° (2.6°)
not supported (5.6) (4.3) (3.3) (2.6)
9
4-point supported 6.2° (6.2°) 5.6° (5.6°) 5.1° (5.1°) 3.7° (3.7°)
not supported (7.2°) (5.5) (4.2) (3.3) (2.6) (2.1)
7.5
4-point supported 7.2° (7.2°) 6.4° (6.4°) 5.7° (5.7°) 5.1° (5.1°) 4.3 (4.5°) 2.8° (2.8°)
not supported (7.1) (5.2) (4.0) (3.2) (2.5) (2.0)
6
4-point supported 7.8° (7.8°) 6.7° (6.7°) 5.9° (5.9°) 5.1 (5.2°) 4.2 (4.6°) 3.5 (3.7°)
not supported (10.1°) (9.4) (6.6) (4.9) (3.8) (3.0) (2.4) (2.0)
4.5
4-point supported 10.1° (10.1°) 10.6° (10.6°) 8.4° (8.4°) 7.1° (7.1°) 6.1° (6.1°) 5.0 (5.3°) 4.1 (4.7°) 3.4 (4.1)
not supported (13.0) (8.4) (6.0) (4.6) (3.6) (2.9) (2.4) (1.9)
3
4-point supported 16.9° (16.9°) 11.7° (11.7°) 9.0° (9.0°) 7.4° (7.4°) 5.9 (6.2°) 4.8 (5.4°) 4.0 (4.7°) 3.4 (4.0°)
not supported (5.3°) (7.5) (5.5) (4.2) (3.4) (2.7) (2.3) (1.9)
1.5
4-point supported 5.3° (5.3°) 12.5° (12.5*) 9.4° (9.4°) 7.2 (7.6°) 5.7 (6.3°) 4.7 (5.4°) 3.9° (4.6°) 3.3 (3.9°)
not supported (3.8°) (6.9) (5.1) (4.0) (4.0) (2.6) (2.2) (1.8)
0
4-point supported 3.8° (3.8°) 9.2° (9.2°) 8.9 (9.5°) 6.9 (7.6°) 6.9 (7.6°) 4.5 (5.3°) 3.8 (4.5°) 3.3 (3.7°)
not supported (3.9°) (6.5) (4.8) (3.8) (3.1) (2.5) (2.1) (1.8)
–1.5
4-point supported 3.9° (3.9°) 7.1° (7.1°) 8.7 (9.1°) 6.7 (7.3°) 5.4 (6.0°) 4.4 (5.0°) 3.8 (4.1°) 3.2° (3.2°)
not supported (6.4) (4.7) (3.7) (3.0) (2.5) (2.1)
–3
4-point supported 6.8° (6.8°) 8.3° (8.3°) 6.5 (6.7°) 5.3 (5.5°) 4.4 (4.5°) 3.6° (3.6°)
Max. reach 16.1 m
not supported (1.7)
2.5
4-point supported 1.9° (1.9°)

14
 MHL350 F

MHL350 F: WORKING RANGES / CARRYING CAPACITY

17

REACH 15 M WITH DIPPER STICK 16

15

Loading equipment Boom 8.5 m 14

Dipper stick 6.2 m
13
Cactus grab
12

RECOMMENDED ATTACHMENTS
11

10

Terex ® Fuchs cactus grab 0.6 m 3 Open or half-closed 9

Terex Fuchs cactus grab 0.8 m

® 3
Open or half-closed 8

7
Terex Fuchs magnetic plate MP 1250 dia = 1250 mm with 20 kW magnet system
®

6
Clamshell grab 1.4 m 3 Density of materials handled up to 1600 kg/m3
5

Clamshell grab 1.6 m 3 Density of materials handled up to 800 kg/m3 4

Lift hook 10 t 3

The lift capacity values are stated in metric tons (t). The pump pressure is 360 bar. 0
In accordance with ISO 10567 the lift capacity values represents 75% of the static

Rotation center
-1
tipping loads or 87% of the hydraulic lifting force (marked °). On solid and level ground
the values apply to a swing range of 360°. The (…) values apply in the longitudinal -2
direction of the undercarriage. The values for “not supported” only apply via the
-3
steering axle or the locked oscillating axle. The weights of the attached load hoisting
equipment (grab, load hock, etc.) must be deducted from the lift capacity values. The -4

working load of the lifting devise must be observed. In accordance with the EN 474-5 -5
for object handling application hose rupture valves on the boom and stick cylinders, an
overload warning device and the lift capacity table in the cab are required. For object -6

handling application the machine has to be supported on a level ground. -7

17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

 Reach in m

Undercarriage
Height [m] outrigger
Reach [m]
4.5 6 7.5 9 10.5 12 13.5 15
not supported (5.5°) (3.7°)
15
4-point supported 5.5° (5.5°) 3.7° (3.7°)
not supported (5.7°) (4.3°)
13.5
4-point supported 5.7° (5.7°) 4.3° (4.3°)
not supported (6.5°) (5.5) (4.1)
12
4-point supported 6.5° (6.5°) 5.7° (5.7°) 4.3° (4.3°)
not supported (7.2°) (5.5) (4.2) (3.2)
10.5
4-point supported 7.2° (7.2°) 6.6° (6.6°) 5.6° (5.6°) 3.8° (3.8°)
not supported (7.4) (5.4) (4.1) (3.2) (2.5)
9
4-point supported 7.6° (7.6°) 6.7° (6.7°) 5.9° (5.9°) 5.1° (5.1°) 2.6° (2.6°)
not supported (7.1) (5.3) (4.0) (3.2) (2.5)
7.5
4-point supported 8.0° (8.0°) 6.9° (6.9°) 6.0° (6.0°) 5.1 (5.3°) 4.1° (4.1°)
not supported (9.7) (6.7) (5.0) (3.9) (3.1) (2.5)
6
4-point supported 10.5° (10.5°) 8.5° (8.5°) 7.1° (7.1°) 6.2° (6.2°) 5.0 (5.4°) 4.1 (4.8°)
not supported (13.9) (8.8) (6.3) (4.7) (3.7) (3.0) (2.4) (2.0)
4.5
4-point supported 16.3° (16.3°) 11.6° (11.6°) 9.0° (9.0°) 7.4° (7.4°) 6.1 (6.3°) 5.0 (5.5°) 4.1 (4.8°) 2.9° (2.9°)
not supported (6.4°) (7.9) (5.8) (4.4) (3.5) (2.8) (2.3) (1.9)
3
4-point supported 6.4° (6.4°) 12.5° (12.5°) 9.5° (9.5°) 7.4 (7.7°) 5.8 (6.4°) 4.8 (5.5°) 4.0 (4.7°) 3.4° (3.4°)
not supported (7.1) (5.3) (4.1) (3.3) (2.7) (2.3) (1.9)
1.5
4-point supported 10.3° (10.3°) 9.2 (9.7°) 7.1 (7.8°) 5.6 (6.4°) 4.7 (5.4°) 3.9 (4.6°) 3.3° (3.3°)
not supported (6.7) (5.0) (3.9) (3.2) (2.6) (2.2) (1.9)
0
4-point supported 7.0° (7.0°) 8.9 (9.5°) 6.8 (7.6°) 5.5 (6.3°) 4.5 (5.2°) 3.9 (4.3°) 3.0° (3.0°)
not supported (6.5°) (4.9) (3.8) (3.1) (2.6) (2.2)
–1.5
4-point supported 6.5° (6.5°) 8.7° (8.7°) 6.7 (7.1°) 5.4 (5.9°) 4.5 (4.8°) 3.8° (3.8°)
not supported (4.8) (3.8) (3.1)
–3
4-point supported 7.6° (7.6°) 6.3° (6.3°) 5.2° (5.2°)
Max. reach 15.2 m
not supported (1.9)
2.5
4-point supported 2.4° (2.4°)

www.terex-fuchs.com 15
MHL350 F | Technical data

MHL350 F: WORKING RANGES / CARRYING CAPACITY

18

17

REACH 14.7 M 16

WITH MULTI-PURPOSE STICK 15

14
Loading equipment Boom 8.5 m
13
Multi-purpose stick 5.6 m
12
Sorting grab
11

10

0
The lift capacity values are stated in metric tons (t). The pump pressure is 360 bar.

Rotation center
In accordance with ISO 10567 the lift capacity values represents 75% of the static -1

tipping loads or 87% of the hydraulic lifting force (marked °). On solid and level ground -2
the values apply to a swing range of 360°. The (…) values apply in the longitudinal
-3
direction of the undercarriage. The values for “not supported” only apply via the
steering axle or the locked oscillating axle. The weights of the attached load hoisting -4

equipment (grab, load hock, etc.) must be deducted from the lift capacity values. The -5
working load of the lifting devise must be observed. In accordance with the EN 474-5 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

for object handling application hose rupture valves on the boom and stick cylinders, an  Reach in m
overload warning device and the lift capacity table in the cab are required. For object
handling application the machine has to be supported on a level ground.

Undercarriage
Height [m] outrigger
Reach [m]
4.5 6 7.5 9 10.5 12 13.5
not supported (4.6°)
15
4-point supported 4.6° (4.6°)
not supported (5.4°)
13.5
4-point supported 5.4° (5.4°)
not supported (6.7°) (5.1) (3.4°)
12
4-point supported 6.7° (6.7°) 5.5° (5.5°) 3.4° (3.4°)
not supported (7.1) (5.2) (3.9) (2.6°)
10.5
4-point supported 7.6° (7.6°) 6.6° (6.6°) 5.4° (5.4°) 2.6° (2.6°)
not supported (7.0) (5.1) (3.9) (3.0)
9
4-point supported 7.8° (7.8°) 6.7° (6.7°) 5.9° (5.9°) 4.7° (4.7°)
not supported (9.8°) (6.8) (5.0) (3.8) (2.9) (2.3)
7.5
4-point supported 9.9° (9.9°) 8.1° (8.1°) 6.9° (6.9°) 5.9° (5.9°) 4.9° (5.2°) 3.0° (3.0°)
not supported (13.7°) (9.2) (6.4) (4.7) (3.6) (2.9) (2.3)
6
4-point supported 13.7° (13.7°) 10.8° (10.8°) 8.5° (8.5°) 7.1° (7.1°) 6.0 (6.1°) 4.8 (5.3°) 3.9 (4.4°)
not supported (12.8) (8.3) (5.9) (4.4) (3.5) (2.8) (2.2)
4.5
4-point supported 17.1° (17.1°) 11.8° (11.8°) 9.0° (9.0°) 7.4° (7.4°) 5.8 (6.2°) 4.7 (5.3°) 3.9 (4.5°)
not supported (7.4) (5.4) (4.2) (3.3) (2.6) (2.2)
3
4-point supported 12.5° (12.5°) 9.3 (9.4°) 7.1 (7.5°) 5.6 (6.2°) 4.6 (5.3°) 3.8 (4.4°)
not supported (6.8) (5.0) (3.9) (3.1) (2.5) (2.1)
1.5
4-point supported 7.6° (7.6°) 8.9 (9.4°) 6.8 (7.5°) 5.4 (6.2°) 4.5 (5.1°) 3.7 (4.2°)
not supported (6.1°) (4.8) (3.7) (3.0) (2.5) (2.1)
0
4-point supported 6.1° (6.1°) 8.6 (9.0°) 6.6 (7.2°) 5.3 (5.9°) 4.4 (4.9°) 3.7 (3.9°)
not supported (6.2°) (4.7) (3.6) (2.9) (2.4)
–1.5
4-point supported 6.2° (6.2°) 8.1° (8.1°) 6.5 (6.6°) 5.2 (5.4°) 4.3° (4.4°)
Max. reach 14.7 m
not supported (1.8)
2.5
4-point supported 2.6° (2.6°)

16
 MHL355 F

DIMENSIONS MHL355 F
All dimensions in mm

2850
2870

191

3609
2934
1652
540

290

615
3200 1700

5980 2940

3000

4520

5030

1960 3000

TRANSPORT DIMENSIONS MHL355 F

All dimensions in mm

191
3802

3609

6149 1296

12813

www.terex-fuchs.com 17
MHL355 F | Technical data

MHL355 F: WORKING RANGES / CARRYING CAPACITY

18

17

REACH 16 M 16

Loading equipment Boom 8.5 m 15

Dipperstick 7.2 m 14

Cactus grab 13

12

RECOMMENDED ATTACHMENTS 11

10
Terex ® Fuchs cactus grab 0.6 m 3 Open or half-closed
9
Terex ® Fuchs magnetic plate MP 1150 dia = 1150 mm with 13 kW magnet system 8

Clamshell grab 1.0 m 3 Density of materials handled up to 800 kg/m3 7

The lift capacity values are stated in metric tons (t). The pump pressure is 360 bar. 1

In accordance with ISO 10567 the lift capacity values represents 75% of the static 0
tipping loads or 87% of the hydraulic lifting force (marked °). On solid and level ground

Rotation center
the values apply to a swing range of 360°. The (…) values apply in the longitudinal -1

direction of the undercarriage. The values for “not supported” only apply via the -2
steering axle or the locked oscillating axle. The weights of the attached load hoisting
-3
equipment (grab, load hock, etc.) must be deducted from the lift capacity values. The
working load of the lifting devise must be observed. In accordance with the EN 474-5 -4
for object handling application hose rupture valves on the boom and stick cylinders, an
-5
overload warning device and the lift capacity table in the cab are required. For object
handling application the machine has to be supported on a level ground. -6

-7
18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

 Reach in m

Undercarriage
Height [m] outrigger
Reach [m]
3 4.5 6 7.5 9 10.5 12 13.5 15
not supported (4.5)°
16.5
4-point supported 4.5° (4.5)°
not supported (4.8)° (3.6)°
15
4-point supported 4.8° (4.8)° 3.6° (3.6)°
not supported (4.8)° (3.7)°
13.5
4-point supported 4.8° (4.8)° 3.7° (3.7)°
not supported (5.5)° (4.7)° (3.4)°
12
4-point supported 5.5° (5.5)° 4.7° (4.7)° 3.4° (3.4)°
not supported (6.0)° (5.3) (4.2) (2.8)°
10.5
4-point supported 6.0° (6.0)° 5.4° (5.4)° 4.5° (4.5)° 2.8° (2.8)°
not supported (6.3)° (5.3) (4.2) (3.4)
9
4-point supported 6.3° (6.3)° 5.6° (5.6)° 5.1° (5.1)° 3.9° (3.9)°
not supported (7.4)° (6.5)° (5.2) (4.1) (3.4) (2.7)°
7.5
4-point supported 7.4° (7.4)° 6.5° (6.5)° 5.8° (5.8)° 5.2° (5.2)° 4.7° (4.7)° 2.7° (2.7)°
not supported (8.0)° (6.4) (5.0) (4.0) (3.3) (2.7)
6
4-point supported 8.0° (8.0)° 6.8° (6.8)° 5.9° (5.9)° 5.3° (5.3)° 4.7° (4.7)° 3.4° (3.4)°
not supported (11.3)° (10.8)° (8.1) (6.1) (4.8) (3.9) (3.2) (2.7)
4.5
4-point supported 11.3° (11.3)° 10.8° (10.8)° 8.6° (8.6)° 7.1° (7.1)° 6.1° (6.1)° 5.4° (5.4)° 4.7° (4.7)° 4.0° (4.0)°
not supported (16.0) (10.4) (7.5) (5.7) (4.6) (3.7) (3.1) (2.6)
3
4-point supported 17.3° (17.3)° 11.9° (11.9)° 9.2° (9.2)° 7.5° (7.5)° 6.3° (6.3)° 5.4° (5.4)° 4.7° (4.7)° 4.1° (4.1)°
not supported (4.9)° (9.5) (7.0) (5.4) (4.4) (3.6) (3.0) (2.6)
1.5
4-point supported 4.9° (4.9)° 12.6° (12.6)° 9.5° (9.5)° 7.7° (7.7)° 6.4° (6.4)° 5.4° (5.4)° 4.6° (4.6)° 3.9° (3.9)°
not supported (1.9)° (3.8)° (8.8)° (6.6) (5.1) (4.2) (3.5) (2.9) (2.5)
0
4-point supported 1.9° (1.9)° 3.8° (3.8)° 8.8° (8.8)° 9.5° (9.5)° 7.6° (7.6)° 6.3° (6.3)° 5.3° (5.3)° 4.5° (4.5)° 3.7° (3.7)°
not supported (3.9)° (7.1)° (6.3) (5.0) (4.0) (3.4) (2.9) (2.5)
–1.5
4-point supported 3.9° (3.9)° 7.1° (7.1)° 9.1° (9.1)° 7.3° (7.3)° 6.0° (6.0)° 5.0° (5.0)° 4.1° (4.1)° 3.2° (3.2)°
not supported (6.8)° (6.2) (4.9) (4.0) (3.3) (2.9)
–3
4-point supported 6.8° (6.8)° 8.2° (8.2)° 6.7° (6.7)° 5.5° (5.5)° 4.5° (4.5)° 3.6° (3.6)°
Max. reach 16.1 m

18
 MHL350 F | MHL355 F

MODULAR SYSTEM
Attachments Work equipment

Cactus grab Work equipment straight

furthermore

Timber grab
Work equipment with
Scrap shears Sorting grapple
multipurpose stick
Magnetic plate

Load hook

Clamshell grab Work equipment cranked

Uppercarriage

Cab system
hydraulically adjustable
Viewing height: max. 5.6 m

Engine Options

Diesel engine Electric motor Cable reel Cable drum Power Pack

Undercarriage

Pylon Pylon Pylon Pylon Pylon

up to max. up to max. up to max. up to max. up to max.

0.80 m 1.40 m 0.80 m 3.70 m 3.70 m

Mobile special:
Mobile: Standard- For extended Crawler: Standard- Crawler: Pedestal
Undercarriage undercarriage Undercarriage XL-Undercarriage undercarriage

www.terex-fuchs.com 19
GET A HANDLE ON FLEET MANAGEMENT
TEREX® FUCHS TELEMATICS SYSTEM:
RECOGNIZE AND OPTIMIZE POTENTIAL

The Terex® Fuchs Telematics system:

know exactly how and where everything
is running. The Terex® Fuchs Telematics
system offers a modern solution to help
you analyze and optimize the efficiency
of your machines. The Terex® Fuchs
Telematics system records and
communicates valuable information on
the operating status of each individual
machine. Where are the machines?
How are they working? Is a service
check pending? Take advantage of this
advanced software and get a handle on
your fleet management with the tool that
connects for you.

ALL-IN-ONE MACHINE MANAGEMENT

EVERYTHING AT A GLANCE: OPERATING DATA, MACHINE STATUS, GPS DATA

Record, display, and analyse data:

high efficiency through precise information
 Available online anywhere and at any time*:
comprehensive information on the GPS location, start
and stop times, fuel consumption, operating hours,
maintenance status, and much more.
 User-friendly interface: displays information clearly for
at a glance metrics and diagnostics. Take action before
damage occurs: predetermined maintenance intervals
are signaled and error messages are displayed in plain
text messages.
 The Terex® Fuchs Telematics system is optionally avail-
able or can be retrofitted into existing machines to help
control your operating costs and keep your machines in
top shape.
* Internet connection required

www.terex-fuchs.com

August 2015. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for
instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to
our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. © Terex Corporation 2014 · Terex, the Terex Crown design, Fuchs and Works For You
are trademarks of Terex Corporation or its subsidiaries.