Valves Technical

Butterfly Valve Accessories

Lug Insert Sets 316 Zinc

Valve
• Field installable lugs for all Spears® PVC Stainless Steel Plated Steel
Size
& CPVC Standard Butterfly Valves only. Part Number Part Number
1-1/2 LUG1-015 LUG2-015
• Allows easy single-side installation to mating
flange. 2 & 2-1/2 LUG1-020 LUG2-020
• Choice of high corrosion resistant 3 LUG1-030 LUG2-030
316 stainless steel or zinc plated 4 LUG1-040 LUG2-040
steel construction. 6&8 LUG1-080 LUG2-080
10 & 12 LUG1-120 LUG2-120

Lever Handle Kits

Valve Size Part Number
• Exact replacement or conversion handle for 1-1/2 BFH-015
Spears® 1-1/2" through 8" Butterfly Valves.
2 & 2-1/2 BFH-020
• High impact polypropylene construction featuring
3 BFH-030
quick-action reinforced polymer position stop and
grip with built-in lock-out capability. 4 BFH-040
• Includes all components and hardware 6 BFH-060
assembled for quick installation. 8 BFH-080

T-Handle Kits
• Specialty Handle for minimum
space requirements. Valve Size Part Number
• High impact polypropylene construction featuring 1-1/2 BFTH-015
quick-action reinforced polymer position stop and 2 and 2-1/2 BFTH-020
grip with built-in lock-out capability. 3 BFTH-030
4 BFTH-040
Speed Handle for Gear Operator
• Quickly attaches to Spears® Gear Operator
Handle to allow rapid opening or closing
of valve.

Valve Size Part Number

1-1/2 - 12 SH-120

Positive Stem Stop for

Butterfly Valve with
Gear Operator
• Provides positive stop for Gear Operator shaft to
avoid changes in the degree of opening for
varying flow conditions. Valve Size Part Number
1-1/2 - 12 PSS-120
14 - 24 PSS-240

2" Square / T-Style Operator Nuts

• Allows operation with conventional 2" Square or
T-Style handle wrenches.
• Fits All Spears® Butterfly Valve Gear Operators. (NOT
FOR USE ON VALVE STEM) Valve Size Part Number
1-1/2 - 24 GTN-040

Made in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas
See Spears® Product Sourcebook for product offerings Page 16
 Valves Technical
Butterfly Valve Accessories
Gear Operator Kits
For Wafer Style Butterfly Valves, replace the "GO" prefix with "GOW" in the
part number.
• Bolt-on conversion or replacement unit for all Spears® Butterfly Valves.
• Low Profile Submersible Gear Operator Standard on 1-1/2" and larger sizes,
utilizes high efficiency Acme screw with PVC or CPVC housing with high
impact red polypropylene handwheel and built in position indicator.
• Includes all components and hardware for direct mount
• IPx7

Gear Operator Kits

Valve Size 1-1/2 2 2-1/2 3 4 6 8 10 12 14
Part
SGOP1-015 SGOP1-020 SGOP1-025 SGOP1-030 SGOP1-040 SGOP1-060 SGOP1-080 SGOP1-100 SGOP1-120 SGOP1-140
Number

Extended Chemical Resistance Options

Spears® offers several options for extended chemical resistance in PVC, CPVC and Polypropylene Butterfly Valves, including those
listed below. Contact Spears® for additional ordering information.

PTFE Seat Sleeves PTFE Coated Valve Stems

• PTFE envelope-type sleeve encases and isolates Spears® • Durable, bonded PTFE coating over standard SS 316L stem for
standard elastomer seat for extended chemical resistance extended chemical resistance.
while maintaining resiliency and sealing capability. • Viable alternative to more costly special alloy stems.
• Available for valve sizes 1-1/2" - 12" • Available for all valve sizes.
• Sold factory-installed in PVC, CPVC or PP valve • Sold factory installed in PVC, CPVC or PP valves.

True-Lug Butterfly Valve Bolt Kit

Connects 1-Side of True-Lug Valve to 1-Spears® Flange Includes Bolts & Flat Washers
Use 2-Kits For Dual Spears® Flanges
Part Number
Size
Zinc Plated SS316 SS304
1-1/2 BFHKL-015 BFHKL1-015 BFHKL2-015
2 BFHKL-020 BFHKL1-020 BFHKL2-020
2-1/2 BFHKL-025 BFHKL1-025 BFHKL2-025
3 BFHKL-030 BFHKL1-030 BFHKL2-030
4 BFHKL-040 BFHKL1-040 BFHKL2-040
6&8 BFHKL-080 BFHKL1-080 BFHKL2-080
10 & 12 BFHKL-120 BFHKL1-120 BFHKL2-120

Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears® Manufacturing Company
Page 17 See Spears® Product Sourcebook for product offerings
 Valves Technical
Butterfly Valve Accessories
Chainwheel Operator Kits Valve Size Part Number
For Wafer Style Butterfly Valves replace the "CO" prefix 2 CO-020
with "COW" in the part number. 2-1/2 CO-025
• Bolt-on conversion unit for all Spears® Butterfly Valves. 3 CO-030
Includes all hardware for direct mount to valve.
4 CO-040
• Enables operation of Spears® Butterfly Valves in high,
6 CO-060
normally out of reach locations. Makes valve opening
or closing easy by means of a slight pull on the 8 CO-080
sprocket chain. 10 CO-100
• Unit consists of Cast Aluminum high efficiency Gear 12 CO-120
Operator with Aluminum Alloy Sprocket Rim and Chain 14-24 CO-140
Guide.
2-1/2" and smaller kits available on special order
• Chain options provide choice of 316 Stainless Steel, basis.
Hot-Dipped Galvanized. Order separately to desired
length.
Note: In horizontal system installations, Chainwheel Operators should be
generally mounted with operator below valve (inverted valve) to maintain LOCK-LINK CHAIN Part
clearance between chain and system piping. Check for adequate clearance
before installing an operator in a top-mount position. OPTIONS Number
Hot-Dip Galvanized GC-1
(VALVE NOT INCLUDED) Stainless Steel SC-1
Brass BC-1

Determining Floor-to-Chainwheel Height

Typical orientation is shown for valve in horizontal piping system installation.
Floor-to-Chainwheel height is determined by subtracting the specified "C"
dimension from the system centerline height (add "C" dimension if used with
top-mount orientation). In vertical piping system installations, the Floor-to-
Chainwheel height is the same as that for the centerline location of the valve in
the system.

How to Order Chain

Required chain length is based on chain drop at 3 ft. from floor.
Floor-to-Chainwheel Height 7' 8' 9' 10' 11' 12' 13' 14' 15'
Required Chain Length 10' 12' 14' 16' 18' 20' 22' 24' 26'

Chainwheel Operator Dimensions (Note: w denotes Wafer Style Butterfly Valve Dimensions)
Valve
Size A Aw B Bw C Cw D Dw E Ew F Fw G Gw H Hw
2 12-13/16 12-1/16 9-13/16 9-1/16 5-3/4 5 2-1/4 2-1/4 4-3/8 4-3/8 6-3/8 6-3/8 7-3/4 7-3/4 7-3/8 7-3/8
2-1/2 13-7/16 13-1/16 10-1/16 9-1/16 6 5-1/2 2-1/4 2-1/4 4-3/8 4-3/8 6-3/8 6-3/8 7-3/4 7-3/4 7-3/8 7-3/8
3 14-9/16 13-7/8 10-13/16 10-1/4 6-3/4 6-3/16 2-3/4 2-3/4 4-11/16 4-11/16 6-1/2 6-1/2 7-3/4 7-3/4 7-3/8 7-3/8
4 16-1/16 14-15/16 11-9/16 10-11/16 7-1/2 6-5/8 2-3/4 2-3/4 4-11/16 4-11/16 6-1/2 6-1/2 7-3/4 7-3/4 7-3/8 7-3/8
6 19-7/16 17-15/16 13-15/16 12-7/16 9-7/8 8-3/8 2-3/4 2-3/4 4-11/16 4-11/16 6-1/2 6-1/2 7-3/4 7-3/4 7-3/8 7-3/8
8 21-11/16 20-1/2 14-15/16 13-3/4 10-7/8 9-11/16 2-3/4 2-3/4 4-11/16 4-11/16 6-1/2 6-1/2 7-3/4 7-3/4 7-3/8 7-3/8
10 24-13/16 24-5/8 16-13/16 16-1/2 12-3/4 12-7/16 3-11/16 3-11/16 6-13/16 6-13/16 9-5/8 9-5/8 7-3/4 7-3/4 7-3/8 7-3/8
12 27-5/16 27 17-13/16 17-1/2 13-3/4 13-7/16 3-11/16 3-11/16 6-13/16 6-13/16 9-5/8 9-5/8 7-3/4 7-3/4 7-3/8 7-3/8
14 31-3/16 - 20-11/16 - 14-15/16 - 3-15/16 - 7-27/32 - 8-7/8 - 10-1/4 - 9 -
16 33-3/4 - 22 - 16-1/4 - 3-15/16 - 7-27/32 - 8-7/8 - 10-1/4 - 9 -
18 34-15/16 - 22-7/16 - 16-11/16 - 3-1/2 - 6-1/2 - 8-7/8 - 10-1/4 - 9 -
20 37-7/16 - 23-11/16 - 17-15/16 - 3-1/2 - 6-1/2 - 8-7/8 - 10-1/4 - 9 -
24 41-15/16 - 25-15/16 - 20-1/8 - 3-1/3 - 6-1/2 - 8-7/8 - 10-1/4 - 9 -

Made in the U.S.A. Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas
See Spears® Product Sourcebook for product offerings Page 18
 Valves Technical
Butterfly Valve Accessories

Stem Extensions
For Wafer Style Butterfly Valves replace the "BFSE" prefix with
"BFSEW" in the part number.
• Designed for use on Spears® Butterfly Valves.
• Corrosion Resistant PVC Housing.
• Stainless Steel Internal Extension Shaft.
• All Mounting Hardware Included.
• Detailed Instructions for Quick Assembly.
• Fabricated to Order in Standard 6" Increments.
Typical Application (VALVE NOT INCLUDED)
Gear Operator (shown) or Lever Handle Sold with Valve

Stem Valve Size

Extension
Height 1-1/2 2 & 2-1/2 3 4 6 8 10
24 BFSE-015-240 BFSE-020-240 BFSE-030-240 BFSE-040-240 BFSE-060-240 BFSE-080-240 BFSE-100-240
30 BFSE-015-300 BFSE-020-300 BFSE-030-300 BFSE-040-300 BFSE-060-300 BFSE-080-300 BFSE-100-300
36 BFSE-015-360 BFSE-020-360 BFSE-030-360 BFSE-040-360 BFSE-060-360 BFSE-080-360 BFSE-100-360
42 BFSE-015-420 BFSE-020-420 BFSE-030-420 BFSE-040-420 BFSE-060-420 BFSE-080-420 BFSE-100-420
48 BFSE-015-480 BFSE-020-480 BFSE-030-480 BFSE-040-480 BFSE-060-480 BFSE-080-480 BFSE-100-480
54 BFSE-015-540 BFSE-020-540 BFSE-030-540 BFSE-040-540 BFSE-060-540 BFSE-080-540 BFSE-100-540
60 BFSE-015-600 BFSE-020-600 BFSE-030-600 BFSE-040-600 BFSE-060-600 BFSE-080-600 BFSE-100-600
66 BFSE-015-660 BFSE-020-660 BFSE-030-660 BFSE-040-660 BFSE-060-660 BFSE-080-660 BFSE-100-660
72 BFSE-015-720 BFSE-020-720 BFSE-030-720 BFSE-040-720 BFSE-060-720 BFSE-080-720 BFSE-100-720
78 BFSE-015-780 BFSE-020-780 BFSE-030-780 BFSE-040-780 BFSE-060-780 BFSE-080-780 BFSE-100-780
84 BFSE-015-840 BFSE-020-840 BFSE-030-840 BFSE-040-840 BFSE-060-840 BFSE-080-840 BFSE-100-840
90 BFSE-015-900 BFSE-020-900 BFSE-030-900 BFSE-040-900 BFSE-060-900 BFSE-080-900 BFSE-100-900
96 BFSE-015-960 BFSE-020-960 BFSE-030-960 BFSE-040-960 BFSE-060-960 BFSE-080-960 BFSE-100-960
102 BFSE-015-1020 BFSE-020-1020 BFSE-030-1020 BFSE-040-1020 BFSE-060-1020 BFSE-080-1020 BFSE-100-1020
108 BFSE-015-1060 BFSE-020-1080 BFSE-030-1080 BFSE-040-1080 BFSE-060-1080 BFSE-080-1080 BFSE-100-1080
114 BFSE-015-1140 BFSE-020-1140 BFSE-030-1140 BFSE-040-1140 BFSE-060-1140 BFSE-080-1140 BFSE-100-1140
120 BFSE-015-1200 BFSE-020-1200 BFSE-030-1200 BFSE-040-1200 BFSE-060-1200 BFSE-080-1200 BFSE-100-1200

Stem Valve Size

Extension
Height 12 14 - 24
24 BFSE-120-240 BFSE-140-240
30 BFSE-120-300 BFSE-140-300
36 BFSE-120-360 BFSE-140-360
42 BFSE-120-420 BFSE-140-420
48 BFSE-120-480 BFSE-140-480
54 BFSE-120-540 BFSE-140-540
60 BFSE-120-600 BFSE-140-600
66 BFSE-120-660 BFSE-140-660
72 BFSE-120-720 BFSE-140-720
78 BFSE-120-780 BFSE-140-780
84 BFSE-120-840 BFSE-140-840
90 BFSE-120-900 BFSE-140-900
96 BFSE-120-960 BFSE-140-960
102 BFSE-120-1020 BFSE-140-1020
108 BFSE-120-1080 BFSE-140-1080
114 BFSE-120-1140 BFSE-140-1140
120 BFSE-120-1200 BFSE-140-1200
Basic Stem Extension height is 24" and is manufactured in standard 6" increments. Intermediate Stem Extension heights are available and are priced to the
next full 6" increment. For heights over 120", please contact your servicing Spears® Regional Distribution Center. 14"-24" Valves Stem Extensions use the same 14" part number.
Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas Spears® Manufacturing Company
Page 19 See Spears® Product Sourcebook for product offerings