2153159-PHO 12-061-15
Approval testing of a front combination lamp
trade mark JUSTTOP or , type name
JS-12307
Arnhem, 18 December 2012
Author: H.M. van der Kolk
DEKRA Certification B.V. - Photometry
By order of Just Auto Lighting Technology Co., Ltd., New Taipei city, Taiwan
author : H.M. van der Kolk 18-12-2012 reviewed : G.C. Muda 18-12-2012
B 29 pages 4 annexes HVDK
All testing, inspection, auditing and certification activities of the former KEMA Quality are an integral part of the DEKRA
Certification Group.
DEKRA Certification B.V. Utrechtseweg 310, 6812 AR Arnhem P.O. Box 5185, 6802 ED Arnhem, The Netherlands
T +31 26 356 2000 F +31 26 352 5800 www.dekra-certification.com Company registration 09085396
© DEKRA Certification B.V., Arnhem, The Netherlands. All rights reserved.
It is prohibited to change any and all versions of this document in any manner whatsoever, including but not limited to
dividing it into parts. In case of a conflict between the electronic version (e.g. PDF file) and the original paper version
provided by DEKRA, the latter will prevail.
DEKRA Certification B.V. and/or its associated companies disclaim liability for any direct, indirect, consequential or
incidental damages that may result from the use of the information or data, or from the inability to use the information or
data contained in this document.
The contents of this report may only be transmitted to third parties in its entirety and provided with the copyright notice,
prohibition to change, electronic versions' validity notice and disclaimer.
Products may only be provided with a quality mark or put on the market as approved if DEKRA Certification B.V. has
explicitly granted the right to carry a quality mark
-3- 2153159-PHO 12-061-15
CONTENTS
page
Summary .............................................................................................................................4
1 Application for approval testing .............................................................................5
2 Examination ..........................................................................................................5
3 Results of examination ..........................................................................................6
4 Supplementary remarks ........................................................................................6
Annex 1 Manufacturer's description .................................................................................... 7
Annex 2 Drawing................................................................................................................. 8
Annex 3 Summary test results .......................................................................................... 12
Annex 4 Tables 1 up to 14 inclusive .................................................................................. 16
-4- 2153159-PHO 12-061-15
SUMMARY
The tested samples of the front combination lamp, marked JUSTTOP or type JS-
12307 were found to comply with the requirements of ECE Regulation Nos. 19-03 and 87-00.
-5- 2153159-PHO 12-061-15
1 APPLICATION FOR APPROVAL TESTING
On 31 July 2012, Just Auto Lighting Technology Co., Ltd. in New Taipei city, Taiwan submitted
samples of a front combination lamp, trade name JUSTTOP or , type name JS-12307.
All tests on stability of photometric performance (R19-Annex 5) and tests of lens of complete
headlamps (R19-Annex 6) were performed in the laboratory of ISOQA in Taichung, Taiwan.
Other tests were performed in the laboratory of ISOQA in Tainan, Taiwan.
The front fog lamp is equipped with 1 LED emitting white light.
The daytime running lamp is equipped with 2 LEDs emitting white light.
According to the manufacturer’s technical description, all LEDs are controlled via the control
gear, when one LED fails, all LEDs will fail.
The lenses are made of plastic material GE Lexan PCR 141-11 with UVHC3000 coating.
A brief technical description and a drawing which were sufficiently detailed to permit
identification of the model can be found in Annex 1 and 2 respectively.
The applicant desired an examination to check whether the front combination lamp is in
compliance with the requirements of the ECE Regulation Nos. 19-03 and 87-00.
2 EXAMINATION
The examination was carried out in accordance with the relevant clauses of the regulation
concerned. The tests were performed taking into consideration the manufacturer's information
concerning centre and axis of reference.
For the photometric tests the test voltage of 13.2V for 12V system or 28V for 24V system was
applied. Detail of the electronic light source control gear is presented in Annex 2.
The distance of measurement was 25m for front fog lamp, 3.2m for daytime running lamp.
The approval tests on lenses and/or samples of plastic material GE Lexan PCR141-11 with
UVHC3000 coating, in accordance with Annex 6 of Regulation No. 19-03 are described in
KEMA report No. 2006488-KRQ/LTL 00-207 dated 25 January 2001.
-6- 2153159-PHO 12-061-15
3 RESULTS OF EXAMINATION
The results of the tests are summarised in Annex 3. Detailed results of the tests of the lamps
are presented in Annex 4, tables 1 up to 14.
4 SUPPLEMENTARY REMARKS
The approval number 16603 was assigned. The approval marking is shown in the drawing of
Annex 2.
-7- 2153159-PHO 12-061-15
Annex 1, page 1 of 1
Information Document
of Model Number- JS-12307
Approval Number: 16603
Just Auto Lighting Technology Co., Ltd.
6F., No.2, Lane 163, Shin Yi Road,
Manufacturer’s Name and Address Banciao Dist, New Taipei City, 220 ,
Taiwan.
Trade name or mark
JUSTTOP or
Model Number JS-12307
Material of lens GE Lexan LS2-111 with UVHC3000 coating
Just Auto Lighting Technology Co., Ltd.
JS-12307-FW
Electronic light source control gear
Output Voltage: 11.8V
(part of the lamp but not included into the lamp body)
Light Source MD identification code : MD E4 16603
Category F3
Light Source 1 x LED, 12/24V, 10/12W
Front fog lamp
(Reg. 19)
Color of light emit White
Color of lens Clear
Category RL
2 x LEDs, 12/24V, 6/8 W
Daytime running Light Source (controlled via control gear; if one LED fails, all LEDs
lamp will fail)
(Reg. 87)
Color of light emit White
Color of lens Clear
-8- 2153159-PHO 12-061-15
Annex 2, page 1 of 4
-9- 2153159-PHO 12-061-15
Annex 2, page 2 of 4
-10- 2153159-PHO 12-061-15
Annex 2, page 3 of 4
Front view
Side view
Top view
Front fog lamp and Daytime running lamp with control gear
-11- 2153159-PHO 12-061-15
Annex 2, page 4 of 4
Determination of the apparent surface
JS-12307: Daytime Running Lamp
-12- 2153159-PHO 12-061-15
Annex 3, page 1 of 4
Examination of the front combination lamp JS-12307 carried out according to the relevant
clauses of Regulation No. 87-00
Clause Subject of the relevant Judgement Remark
No. clause of the device
4 1 trade name or mark complies
2 space reserved for complies
the approval mark
6 General specifications:
a intensity and colour complies see below
of the light emitted under 7 and 9
b maintenance of satis complies by visual
factory operation and inspection only
of photometric charac
teristics
c field of visibility complies
horizontal and vertical
7 intensity of the light complies see Annex 41
emitted
8 Apparent Surface complies 4900 mm²
2
9 colour of the light complies
emitted
11 Heat resistance test complies
1
All light sources were controlled by control gear, if one LED fails, all LEDs will fail.
2
Daytime running lamp emitted white light:
12V S1: x= 0.3278, y=0.3351 S2: x=0.3340, y=0.3586
24V S1: x= 0.3274, y=0.3340 S2: x=0.3339, y=0.3582
-13- 2153159-PHO 12-061-15
Annex 3, page 2 of 4
Examination of front fog lamp JS-12307 carried out according to the relevant clauses of
Regulation No. 19-03
Clause Subject of the relevant Judgement Remark
No. clause of the device
3 a trade name or mark complies
b space reserved for complies
the approval mark
3
c LED module rated voltage, complies
rated wattage and specific
identification code
4
d light source control gear complies
4 Marking of the number 24 crossed does not apply applied for both 12V
out by an oblique cross and 24V
5 a photometric characteristics see below
b maintenance of satisfactory complies
operation in normal use
c stability of photometric complies see annexed 4
performance and change
of cut-off line
d requirement on lenses complies see annexed 4
made of plastic material
e total objective luminous flux less than 2000 lm 315 lm
3
LED Module identification code is E4 16603
4
Light source control gear is part of the lamp but not included into the lamp body.
-14- 2153159-PHO 12-061-15
Annex 3, page 3 of 4
Examination of front fog lamp JS-12307carried out according to the relevant clauses of
Regulation No. 19-03
Clause Subject of the relevant Judgement Remark
No. clause of the device
6 a intensity of the light emitted complies see Annex 4
b multiplied by a factor of 0.7 complies see Annex 4
prior
c sharpness and linearity complies see Annex 45
of the cut-off
6
7 colour of the light emitted complies
5
Gradient: (min 0.08)
12V S1 = 0.12 S2 = 0.13
24V S1 = 0.12 S2 = 0.13
Linearity: (max 0.20°)
12V S1 = 0.10° S2 = 0.14°
24V S1 = 0.01° S2 = 0.17°
6
Front Fog Lamp emitted White Light:
12V 1 minute S1: x=0.3193 y=0.3444 S2: x=0.3213 y=0.3298
30 minute S1: x=0.3342 y=0.3598 S2: x=0.3180 y=0.3297
24V 1 minute S1: x=0.3186 y=0.3446 S2: x= 0.3212 y=0.3295
30 minute S1: x=0.3341 y=0.3595 S2: x=0.3178 y=0.3293
-15- 2153159-PHO 12-061-15
Annex 3, page 4 of 4
Examination of front fog lamp JS-12307 carried out according to the relevant clauses of
Regulation No. 19-03
Clause Subject of the relevant Judgement Remark
No. clause of the device
8 absence of dazzle complies
7
A12 a Ageing complies
b Run-up Test does not apply
c Hot re-strike test does not apply
8
d Red content complies
9
e UV-radiation complies
10 11
f Temperature stability complies
7
LED module shall be operated for 15 h and cooled down to ambient temperature before starting the tests
8
12V: K red = 0.0529 ( > 0.05 ) 24V: K red = 0.0523 ( > 0.05 )
9 -8 -5 -8
12V: K uv = 1.57 × 10 ( < 10 W/lm) 12V: K uv = 3.55 × 10 ( < 10-5 W/lm)
10
The illuminance values measured after one minute and until photometric stability has occurred, shall comply with the minimum
and maximum requirements. See Annex 4, Table 2 and 4.
11
The colour of the light emitted, measured after 1 minute and measured after 30 minutes of operation, shall be within the
required colour boundaries in both instances. See remark 4.
-16- 2153159-PHO 12-061-15
Anne 4, table 1 of 14
Front Fog Lamp- 12V-S1(S122272)
-17- 2153159-PHO 12-061-15
Annex 4, table 2 of 14
Front Fog Lamp- 12V-S1 (S122272)-ratio calculated
-18- 2153159-PHO 12-061-15
Annex 4, table 3 of 14
Front Fog Lamp- 12V-S2 (S122627)
-19- 2153159-PHO 12-061-15
Annex 4, table 4 of 14
Front Fog Lamp- 12V-S2 (S122627)-ratio calculated
-20- 2153159-PHO 12-061-15
Annex 4, table 5 of 14
Front Fog Lamp- 24V-S1 (S122272)
-21- 2153159-PHO 12-061-15
Annex 4, table 6 of 14
Front Fog Lamp- 24V-S1(S122272)-ratio calculated
-22- 2153159-PHO 12-061-15
Annex 4, table 7 of 14
Front Fog Lamp- 24V-S2(S122627)
-23- 2153159-PHO 12-061-15
Annex 4, table 8 of 14
Front Fog Lamp- 24V-S2 (S122627) _ratio calculated
-24- 2153159-PHO 12-061-15
Annex 4, table 9 of 14
Daytime Running Lamp –12V- S1 (S122272)
-25- 2153159-PHO 12-061-15
Annex 4, table 10 of 14
Daytime Running Lamp – 12V S2 (S122627)
-26- 2153159-PHO 12-061-15
Annex 4, table 11 of 14
Daytime Running Lamp –24V- S1 (S122272)
-27- 2153159-PHO 12-061-15
Annex 4, table 12 of 14
Daytime Running Lamp – 24V S2 (S122627)
-28- 2153159-PHO 12-061-15
Annex 4, table 13 of 14
Stability of photometric performance on front fog lamps marked JS-12307, sample no.
S122627
Illumination in cd on measuring points
Emax (cd) HV (cd)
A Clean fog lamp – 12V1)
Prior to the test 3347 (2342.9) 2) 176.563 (123.59) 2)
After 12 hours 3475 (2432.5) 2) 176.563 (123.59) 2)
B Dirty fog lamp – 12V1)
After 1 hour 3531 (2471.7) 2) 165.625 (115.93) 2)
C Clean fog lamp – 24V1)
Prior to the test 3410 (2387.0) 2) 185.938 (130.15) 2)
After 12 hours 3514 (2459.8) 2) 178.125 (124.68) 2)
D Dirty fog lamp – 24V1)
After 1 hour 3618 (2532.6) 2) 173.438 (121.40) 2)
1)
The LED module operated by the electronic light source control gear, test voltage was
13.2 or 28V, same sample was tested for both 13.2V and 28V.
2)
() = original value multiplied by 0.7.
After both tests the fog lamp was inspected visually. No distortion, deformation, cracking or
change in colour of the fog lamp lens was noticeable.
The discrepancy of the photometric characteristics prior to the tests and after the tests was
less than 10 per cent.
Under influence of heat the cut-off line changed approximately 1.92 mrad for 12V system and
1.92 mrad for 24V system (maximum allowed change: 2 mrad).
-29- 2153159-PHO 12-061-15
Annex 4, table 14 of 14
Test on the complete fog lamp incorporating a lens of plastic material on class F3 front fog
lamp.
§ 2.4.1 Mechanical deterioration - sample no. S122629
Point on measuring Illumination in cd on measuring points
screen After mechanical Required min. or
deterioration permissible max. value
Line 2 – 12V 64.026 (44.818) 2) 136.5 max.
Line 5 – 12V 187.500 (131.250) 2) 442 max.
Line 2 – 24V 65.625 (45.938) 2) 136.5 max.
Line 5 – 24V 192.188 (134.532) 2) 442 max.
§ 2.6.2 Adherence of coatings – sample no. S122630
The impaired area was approximately 3%, and did not exceed the permitted 15% of the
gridded area.
