CoolBay® Giga
ø152 x H200 (mm)
Rth 0.34 °C/W
Power Pd 150 W
CoolBay® Giga-A Luminus Advanced High Bay LED Cooler ø152mm
Mounting Options
The CoolBay® Giga-A comes with mounting patterns for the broadly used Mounting indicator marks overview
28x28mm COB and 38x38mm COB sizes, as well as with the Zhaga Book 3 MechaTronix recommends the use of a high
mounting holes to accomodate a wide range of LED holders for various brands. thermal conductive interface between the LED
module and the LED cooler. Either thermal grease,
The wetting (contact between the LED engine and the LED cooler) is lifespan for a thermal pad or a phase change thermal pad
these high power leds, so we suggest you to measure besides the Tc point also a thickness 0.1-0.15mm is recommended. Thermal
place on the LED cooler near the contact area - when a temperature difference is pads or phase change thermal pads can be pre-
applied from MechaTronix.
observed than 10°C between these 2 points there is a potential contact issue.
Luminus Gen 4 COB Array
Model names Mounting
• CXM-22 • With Zhaga Book 3 LED holder
• CGM-22 BJB spotlight connector 47.319.2033
Bender+Wirth 631a
Mounting with 4 screws M3 x 6mm
Green indicator marks
Luminus Gen 4 COB Array
Model names Mounting
• CXM-32 • Direct mounting with 2 screws M3 x 4mm
Red indicator marks
• With LED holder
BJB spotlight connector 47.319.4160
Mounting with 4 screws M3 x 6mm
Blue indicator marks
Luminus Gen 3 COB Array
Model names Mounting
• CXM-32 (AC) • Direct mounting with 2 screws M3 x 4mm
Red indicator marks
• With LED holder
BJB spotlight connector 47.319.4160
Mounting with 4 screws M3 x 6mm
Blue indicator marks
No.818, Dashun 2nd Rd., Sanmin Dist., Kaohsiung City 80787, Taiwan
[email protected] www.led-heatsink.com www.mechatronix-asia.com
Tel: +886-7-381-5892 Fax: +886-7-383-9293 VAT: 28600841
