FARM PRODUCTS AND ACCESSORIES

FARM PRODUCTS & ACCESSORIES

Farm Products & Accessories Features.............................. Q-2
Safety Warnings......................................................................... Q-4, Q-11
P. T. O. Adaptors
Splined – Standard Duty to 75 HP................................................ Q-6
Splined – Heavy Duty to 125 HP................................................... Q-6
Kwik-D-Tach Splined to 75 HP........................................................ Q-7
Splined – Standard Duty for Tractors
with 1 3/4-20 Splined P.T.O. to 75 HP.................................... Q-7
Splined – Heavy Duty for Tractors
with 1 3/4-20 Splined P.T.O. to 125 HP................................. Q-7
“Forged” – Standard Duty to 75 HP.............................................. Q-8
Push-Pin Type to 75 HP.................................................................... Q-8
Round Shaft to 75 HP........................................................................ Q-8
Clamp Type to 75 HP......................................................................... Q-8
Sleeve Type Splined to 75 HP......................................................... Q-8
Over-Running Couplers
Kwik-D-Tach Tractor Models to 125 HP ...................................... Q-10
Tractor Models to 75 HP..................................................................... Q-10
Utility Models to 75 HP ..................................................................... Q-15
Universal Models to 75 HP............................................................... Q-15
Special Models....................................................................................... Q-15
Splined Couplings
Splined Couplings ............................................................................... Q-12
Involute Splined Couplings .............................................................. Q-12
Hydraulic Reducer Bushings.............................................................. Q-12
Splined Shafts
Splined Shafts......................................................................................... Q-13
Extension Shafts ................................................................................... Q-13
Involute Splined Shafts........................................................................ Q-13
Weld-On Adaptors
Splined Weld-Ons ................................................................................ Q-9
Quick Release Weld-Ons.................................................................... Q-9
Square Bushing Weld-Ons ............................................................... Q-11
Sprocket Repair Hub for Transit-Mixer........................................... Q-11
Couplings and Splined Hubs
Round Bore Couplings........................................................................
Precision Splined Hubs.......................................................................
Q-14
Q-14
Q
Q
P.T.O. Pump Drive Adaptors
Kwik-D-Tach Splined............................................................................ Q-9
Splined Pump Drive............................................................................. Q-9
Stroke Control Segments for Hydraulic Cylinders................. Q-16
Over-Hung Load Adaptor for Orbit Motors........................... Q-17
Model 330 Pump Drive ........................................................ Q-18 & Q-19
Model 390 P.T.O. Speed Changer....................................... Q-20 & Q-21
Lubrication & Installation instructions............................... See Section R
Shipping Weights & Index...................................................... Q-22

CALL: (605) 225-0360 • FAX: (605) 225-0567 Q-1

 FARM PRODUCTS AND ACCESSORIES

Farm PRODUCTS & Accessories

Features
• Power Ratings Up to 125 hp

•S
 plined PTO Adapters to Fit Most
Tractor and Implement Shafting

•K
 wik-D-Tach Connections for Safe and
Secure Attachments

• F orged Adapters for High Horsepower

Applications

•C
 lamp Type Adapters for Safe
Permanent Installations

•O
 ver-Running Couplers for Handling
High-Inertia PTO Applications

•S
 plined Shafts, Couplings and Hubs for
Convenient Design and Fabrications

•S
 troke Control Segments for Hydraulic
Cylinders

•O
 verhung Load Adapters for Orbit
Motors

•P
 ump Drives for PTO Driven Hydraulic
Pumps

•P
 TO Speed Changers to Facilitate
Tractor/Implement Adaptations

Options
• Special Over-Running Coupler

•M
 odified and Custom Shafts, Hubs and
Couplings

•C
 ontact Hub City with Your Design
Requirements!

Q-2 CALL: (605) 225-0360 • FAX: (605) 225-0567

 FARM PRODUCTS AND ACCESSORIES

Warranty
Hub City Inc. warrants product to be free from defect inspection at Hub City’s factory in Aberdeen, South
in material and workmanship for one year from date of Dakota within one year from date of shipment. See
shipment. The company will repair or replace, F.O.B. Terms and Conditions of Sale at the end of this catalog for
shipping point, any item found to be defective upon complete warranty and limitation of liability statement.

Adjustment Policy
SPLINED SHAFT ADAPTORS: Broken or damaged Splined Aberdeen, South Dakota, will be replaced on a no-
Shaft Adaptors returned directly to the factory in charge basis.

FOR USER/OPERATOR SAFETY, SEE DETAILS ON PAGES Q-4, Q-5 & Q-11

How To Order
When ordering Hub City Farm Products and Accessories
specify the part number and quantity for each item
ordered. Orders may be placed by mail, telephone, fax or
e-mail.

Hub City Inc.

Box 1089
Aberdeen, SD 57401

Telephone: 605/225-0360 Fax: 605/225-0567
E-Mail: [email protected]
Website: www.hubcityinc.com
Q
Q

CALL: (605) 225-0360 • FAX: (605) 225-0567 Q-3

 FARM PRODUCTS AND ACCESSORIES

IMPORTANT INFORMATION!
PLEASE READ BEFORE USING PRODUCT
PTO MOUNTED ACCESSORY SAFETY INSTRUCTION
The application of Hub City farm products/accessories may expose rotating implement drive line components from
the equipment guarding and/or extend the tractor P.T.O. shaft and/or contract the implement drive line.
For the safety of the user/operator, the purchaser or his/her designee must shield and guard any exposed rotating
components and extend the hitch point or shorten the implement drive line to accommodate the use of these
products/accessories.
For the safety of the user/operator, the Hub City products in this catalog identified by this symbol must be used
only on the tractor P.T.O. shaft.

APPLICATION
Mounting a Hub City PTO accessory on your tractor changes the relationship between the end of the operating
(rotating) PTO shaft and the end of the tractor master power take-off (PTO) shield.

This change can result in exposed rotating implement drive line components and if
left unguarded can result in serious injury or death to the user/operator.

To use this Hub City PTO accessory, you MUST extend the tractor master PTO shield to provide
proper guarding of the implement PTO drive line.
The tractor to which you will be mounting this Hub City Power Take-off (PTO) accessory, must be equipped with an
ASAE approved Tractor Master Power Take-Off (PTO) Shield supplied by the tractor manufacturer or constructed to
American Society of Agricultural Engineers Standards and a Power Take-Off (PTO) Shield Extension as identified below
and in Figure No. 1. If the tractor will not have these two (2) shields, DO NOT mount or use this PTO accessory.

Failure to properly guard can result in serious injury or death.

Your PTO driven implement MUST BE equipped with a shielded drive line at all times when
using this Hub City power take-off accessory! If your PTO driven implement drive line is equipped with a tunnel type
drive line shield that is attached to the drive line pedestal on the implement and attaches to the slot and tang on
the tractor master power take-off (PTO) shield, that allows the tunnel shield to telescope as you turn corners, DO
NOT use the implement with this or any other Hub City PTO accessory. The tractor master power take-off shield
extension shown in Figure No. 1, covers the tractor master power-take off shield slot and tang and will not allow the
attachment of the tunnel type drive line shield.

Before mounting the PTO device on the tractor power take-off (PTO) shaft, and con-
figuring and mounting a PTO shield extension, disengage the tractor power take-off
PTO shaft and shut off the tractor engine.

INSTRUCTIONS
The information below will guide you in extending the tractor master power take-off (PTO) shield. If you are unable
or unwilling to extend the tractor master power take-off (PTO) shield do not use or mount this Hub City PTO
Accessory on your tractor.
The requirements of a tractor master power take-off (PTO) shield and its relationship to the tractor power take-off
(PTO) shaft, that will provide the specifications to extend your tractor master power take-off (PTO) shield, can be
obtained from:
The American Society of Agricultural Engineers (ASAE) – 2950 Niles Road – St. Joseph, MI 49085-9659
Phone #616-429-0300, FAX #:616-429-3852, E-mail: [email protected], Web: http://asae.org/
Ref: Std #S203.13, December 1999 or latest revision, front & rear power take-off for agricultural tractors.
Global Engineering Documents – 15 Inverness Way East – Englewood, CO 80112-5776
Phone #303-397-7956 or 800-854-7179, Fax #: 303-397-2740, E-mail [email protected]
Ref: ASAE Std S203-13 December 1999 or latest revision
Your tractor manufacturer, Ref: Your owner/operators manual for mailing address and phone number.
Your local implement dealer from whom you purchased your tractor or who provides similar tractors.

Q-4 CALL: (605) 225-0360 • FAX: (605) 225-0567

 FARM PRODUCTS AND ACCESSORIES

IMPORTANT INFORMATION!
PLEASE READ BEFORE USING PRODUCT

In the construction of a tractor master power take-off (PTO) shield extension, the following information can be used as a
guideline.

DO NOT USE this power take-off shield extension guideline with PTO accessories NOT manufactured
by Hub City.
The shield extension material must be steel, the same or a greater thickness than the steel used in the tractor
master power take-off (PTO) shield.
The shield extension material should be formed to closely fit the contour of the inside of the tractor master power
take-off (PTO) shield.
The shield extension should be fastened to the tractor master power take-off (PTO) shield with a minimum of (7)
5/16 NC Grade 5 bolts, with flat washers, lock washer and nut, (2) bolts on each side and (3) bolts on top of the
shield extension.

DO NOT USE the tractor master power take-off (PTO) shield or the shield extension as a step.

A generic guideline for the dimensional size & construction characteristics of a PTO shield extension are shown in Figure
No. 1:
Determine this length so the back edge of the PTO Shield Extension is:
A. 3-3/8 inches minimum past the end of the Hub City PTO Mounted Accessory, if the male spline of the
accessory is 1-1/8 outside dia 6-tooth, 1-3/8 outside dia 6-tooth, or 1-3/8 outside dia 21-tooth spline.
B. 4-1/2 inches minimum past the end of the Hub City PTO Mounted Accessory, if the male spline of the
accessory is 1-3/4 outside dia 20-tooth spline. (SEE CAUTION NOTE * BELOW)
C. Covering all rotating shafts, parts, and couplings if the
Hub City Accessory is a Pump Drive Adaptor.

2 inches minimum overlap surface

to Tractor Master PTO Shield

P.T.O. Products
Off
Take
er
ow
rP
Same width as ste
INSIDE of Tractor r Ma ld
cto hie
Master PTO Shield Tra O) S
(PT
Same height as
Tractor Master Same thickness Holes for a minimum of (7) 5/16NC
PTO Shield or greater than grade 5 attachment bolts
Tractor Master O)
PTO Shield (PT
e Off n Form the PTO shield extension
k
a nsio to closely fit the INSIDE of
rT
Shield Extension we xte the Tractor Master Power Take
Po eld E
back edge i Off (PTO) Shield on all 3
Sh

Q
surfaces
Figure No. 1
*If this Hub City PTO mounted accessory has a 1-3/4 outside diameter 20-tooth male spline, and is being
mounted on a 1-1/8 or 1-3/8 outside diameter 6-tooth or 1-3/8 outside diameter 21-tooth male spline
tractor PTO shaft, the tractor master power take-off (PTO) shield on the tractor is narrower and closer to the tractor PTO
shaft than a tractor equipped with a 1-3/4 20-tooth male spline PTO shaft. Using this adaptor and extending the tractor
master PTO shield as illustrated above may result in interference between the implement drive line shield and the tractor
master power take-off (PTO) shield and extension during short turns or very unevenground. If this condition is evident,
the tractor master power take-off (PTO) shield and extension must be modified to provide sufficient implement drive line
and drive line shield clearance.

The installation of this Hub City PTO accessory on your tractor also changes the relationship between
the end of the operating PTO shaft and the tractor draw bar hitch point. This extended tractor PTO shaft
condition may require you to extend the tractor hitch point, and/or shorten the implement drive line to
reduce excessive drive line angularity, resulting from short turns or very uneven ground, and/or prevent
the implement drive line from bottoming out, which may damage the Hub City accessory and/or equipment and result in
injury to the user/operator.

CALL: (605) 225-0360 • FAX: (605) 225-0567 Q-5

 FARM PRODUCTS AND ACCESSORIES

FOR USER/OPERATOR SAFETY SEE

P.T.O. Products DETAILS PAGE Q-4

Splined Adaptors – to 75 HP
n Capacity to operate on tractors related to 75 P.T.O. HP
n Provide a means of connecting two dissimilar splines
n Welded steel construction for added strength
n Corrosion resistant finish
n Spring and retaining ring pin or setscrews furnished

Female Male Length Extends Tractor P.T.O. Secured Part

Spline Spline (Inches) Shaft End Shaft Retaining Groove By Number
25mm-18 1 ⁄8-6
3
4 ⁄85
3 ⁄8
3
3 ⁄2
1
Cross Pin 0332-00084*
1 ⁄8-6
1
1 ⁄8-6
3
5 ⁄2
1
3 ⁄4
3
3 ⁄8
5
Cross Pin 0332-03531
1 1⁄8-6 1 1⁄8-6 5 1⁄2 3 3⁄4 3 5⁄8 Cross Pin 0332-00377*
1 3⁄8-6 1 1⁄8-6 6 1⁄2 4 3⁄8 4 1⁄4 Cross Pin 0332-00400
1 3⁄8-6 1 1⁄8-6 5 1⁄8 3 5⁄16 3 5⁄16 Cross Pin 0332-00420
1 3⁄8-6 1 3⁄8-6 6 1⁄2 4 3⁄8 3 7⁄8 Cross Pin 0332-00371
1 3⁄8-6 1 3⁄8-6 5 1⁄8 3 5⁄16 3 5⁄16 Cross Pin 0332-00378
1 3⁄8-21 1 3⁄8-6 6 1⁄2 4 3⁄8 3 7⁄8 Setscrew 0332-00373
1 3⁄8-21 1 3⁄4-20 7 5 4 1⁄2 Setscrew 0332-00070
1 3⁄4-6 1 3⁄8-6 6 1
⁄2 4 3
⁄4 4 5⁄8 Cross Pin 0332-00401

* Manufactured to order

Splined Adaptors – to 125 HP

n Capacity to operate on tractors related to 125 P.T.O. HP
n Developed for long and rugged use
n Alloy steel, heat treated for extra strength
n Corrosion resistant finish
n Setscrews furnished

Female Male Length E­xtends Tractor P.T.O. Secured Part

Spline Spline (Inches) Shaft End Shaft Retaining Groove By Number
1 ⁄8-21
3
1 ⁄8-21
3
6 ⁄8
7
4 13
⁄16 4 ⁄16
13
Setscrew 0332-00001
1 ⁄8-21
3
1 ⁄8-6
3
6 ⁄87
4 13
⁄16 4 ⁄16
11
Setscrew 0332-00002
1 3⁄8-21 1 3⁄4-20 7 11⁄16 5 31
⁄64 4 63⁄64 Clamp Type 0332-00094**
1 3⁄8-6 1 3⁄8-21 6 7⁄8 4 13
⁄16 5 5⁄16 Setscrew 0332-00004
1 3⁄8-6 1 3⁄8-6 6 7⁄8 4 13
⁄16 5 3⁄16 Setscrew 0332-00005*

** Not heat treated

* Manufactured to order

Certified prints are available upon request

Q-6 CALL: (605) 225-0360 • FAX: (605) 225-0567

 FARM PRODUCTS AND ACCESSORIES

FOR USER/OPERATOR SAFETY

SEE DETAILS PAGE Q-4
P.T.O. Products
Kwik-D-Tach Spline Adaptors – to 75 HP
n Capacity to operate on tractors rated to 75 P.T.O. HP
n Patented Quick Release Drive
n New P.T.O. Quick Release Concept – Spring Loaded –rotates about 30°
by hand for quick release
n Dependable operation – no sticking pins. Always easily operated
n No sharp edges, protrusions, pins or other interferences to injure operators
See usage safety warning on page Q4

Female Male Length Extends Tractor P.T.O. Part

Spline Spline (Inches) Shaft End Shaft Retaining Groove
1 ⁄8-6
3
1 ⁄8-6
3
6 1
⁄2 4 3
⁄8 4 3
⁄8 0332-00010
1 ⁄8-6
3
1 ⁄8-21
3
6 1
⁄2 4 3
⁄8 4 7
⁄8 0332-00013
1 3⁄8-6 1 1⁄8-6 6 1
⁄2 4 3
⁄8 4 3
⁄4 0332-00015*
1 3⁄8-21 1 3⁄8-6 6 1
⁄2 4 3
⁄8 3 7
⁄8 0332-01373
1 3⁄8-21 1 3⁄8-21 6 1
⁄2 4 3
⁄8 4 3
⁄8 0332-02121
Repair Kit 0332-00086

* Manufactured to order

Splined Adaptors – to 75 HP
For tractors with 1 3⁄4 - 20 Spline P.T.O.

P.T.O. Products
See usage safety warning on page Q4

Female Male Length Extends Tractor P.T.O. Secured Part

Spline Spline (Inches) Shaft End Shaft Retaining Groove By Number
1 ⁄4-20
3
1 3
⁄8-6 8 3
⁄16 5 3
⁄16 5 3
⁄16 Clamp Type 0332-01476
1 ⁄4-20
3
1 ⁄8-21
3
8 ⁄16
3
5 3
⁄16 5 11
⁄16 Clamp Type 0332-01477

Heavy-Duty Splined Adaptors – to 125 HP

For tractors with 1 3⁄4 - 20 Spline P.T.O.

Female Male Length Extends Tractor P.T.O.

See usage safety warning on page Q4

Secured Part
QQ
Spline Spline (Inches) Shaft End Shaft Retaining Groove By Number
1 ⁄4-20
3
1 3
⁄8-6 8 3
⁄16 5 3
⁄16 5 3
⁄16 Clamp Type 0332-01490
1 ⁄4-20
3
1 ⁄8-21
3
8 3
⁄16 5 3
⁄16 5 11
⁄16 Clamp Type 0332-01491

Certified prints are available upon request

CALL: (605) 225-0360 • FAX: (605) 225-0567 Q-7

 FARM PRODUCTS AND ACCESSORIES

FOR USER/OPERATOR SAFETY SEE

P.T.O. Products DETAILS PAGE Q-4

“Forged” P.T.O. Adaptor – to 75 HP

n 1 1⁄8 - 6 Spline female — 1 3⁄8 - 6 Spline male PART NO. 0332-00018

n “Forged” internal spline

n Universal quick-detach slot and bolt holes – can be used with any
American, British or European P.T.O. system
n Furnished with 5⁄16 x 1 1⁄16 spring pin for direct connection to P.T.O.
n Overall length: 3 – extends P.T.O. 1 1⁄8

Push-Pin Type P.T.O. Adaptors – to 75 HP

Quick Release Extension Adaptor
See usage safety warning on page Q4

Female Male Length Extends Tractor P.T.O. Part

Spline Spline (Inches) Shaft End Shaft Retaining Groove Number
1 3⁄8-6 1 3⁄8-21 6 1⁄2 4 3⁄8 4 7⁄8 0332-00092
1 3⁄8-21 1 3⁄8-6 6 1⁄2 4 3⁄8 3 7⁄8 0332-01375
Old Style 0335-90120 Spring Type Release
Repair Kit
New Style 0336-00182

Round Shaft Adaptors – to 75 HP

Female Male Extends Part
Keyway Length
Round Spline Shaft Number
1
1 ⁄4 1 3⁄8-6 5 11
⁄16 3 1⁄4 0332-00376
1 1 3 11
1 ⁄8 ⁄4 1 ⁄8-6 5 ⁄16 3 3⁄16 0332-00430
1 1⁄4 1
⁄4 1 3⁄8-6 5 11
⁄16 3 3⁄16 0332-00431
1 3⁄8 5
⁄16 1 3⁄8-6 5 11
⁄16 3 3⁄16 0332-00432
1 1⁄2 3
⁄8 1 3⁄8-6 6 9⁄32 4 0332-00433

Clamp Type P.T.O. Adaptors – to 75 HP

See usage safety warning on page Q4

Female Male Length Extends Tractor P.T.O. Part

Spline Spline (Inches) Shaft End Shaft Retaining Groove Number
1 1⁄8-6 1 3⁄8-6 7 5⁄16 4 5⁄8 4 5⁄8 0332-01354
3 3 1 3
1 ⁄8-6 1 ⁄8-6 6 ⁄2 4 ⁄8 4 3⁄8 0332-00057
1 3⁄8-21 1 3⁄8-6 6 1⁄2 4 3⁄8 3 7⁄8 0332-00087

Sleeve Type Splined Adaptors – to 75 HP

Female Male Length Part Special

Spline Spline (Inches) Number Applications
31
⁄32-10 1 3⁄8-6 2 1⁄4 0332-00355 IHC Cub & Kubota
1 1⁄8-6 1 3⁄8-6 2 1⁄4 0332-00352
1 1⁄8-6 1 3⁄8-6 2 0332-00363 Replaced Ford 231082
3
1 ⁄8-6 1 3⁄4-6 2 1⁄2 0332-00403*

* Manufactured to order

Certified prints are available upon request

Q-8 CALL: (605) 225-0360 • FAX: (605) 225-0567

 FARM PRODUCTS AND ACCESSORIES

FOR USER/OPERATOR SAFETY SEE

DETAILS PAGE Q-4
P.T.O. Products
Kwik-D-Tach Splined Pump Drive Adaptors
Same safe, dependable, fast action release as Kwik-D-Tach Splined Adaptors
See usage safety warning on page Q4

Female Female Part

Keyway Length(inches)
Spline Round** Number
1 3⁄8-6 .625 3
⁄16 x 3⁄32 4 1⁄8 0332-00012
3 3 3
1 ⁄8-6 .750 ⁄16 x ⁄32 4 1⁄8 0332-00014
1 3⁄8-6 .875 3
⁄16 x 3⁄32 4 1⁄8 0332-00011
1 3⁄8-6 .937 1
⁄4 x 1⁄8 4 1⁄8 0332-00040
1 3⁄8-6 1.000 1
⁄4 x 1⁄8 4 1⁄8 0332-00016
1 3⁄8-6 1.125 1
⁄4 x 1⁄8 4 1⁄8 0332-00017
** Nominal + .002

Splined Pump Drive Adaptors

1 3⁄8 - 21 Spline Pump Drives are supplied with setscrews

Female Female Part

Keyway Length(inches)
Spline Round** Number
1 1⁄8-6 1.000 1
⁄4 x 1⁄8 3 1⁄16 0332-00412
1 3⁄8-6 .625 3
⁄16 x 3⁄32 4 1⁄8 0332-00407
1 3⁄8-6 .750 3
⁄16 x 3⁄32 4 1⁄8 0332-00408
1 3⁄8-6 .875 3
⁄16 x 3⁄32 4 1⁄8 0332-00409
1 3⁄8-6 .937 1
⁄4 x 1⁄8 4 1⁄8 0332-00413

P.T.O. Products
1 3⁄8-6 1.000 1
⁄4 x 1⁄8 4 1⁄8 0332-00410
1 3⁄8-6 1.125 1
⁄4 x 1⁄8 4 1⁄8 0332-00411
1 3⁄8-21 .625 3
⁄16 x 3⁄32 4 1⁄8 0332-00607
1 3⁄8-21 .750 3
⁄16 x 3⁄32 4 1⁄8 0332-00608
1 3⁄8-21 .937 1
⁄4 x 1⁄8 4 1⁄8 0332-00612
1 3⁄8-21 1.000 1
⁄4 x 1⁄8 4 1⁄8 0332-00610
1 3⁄8-21 1.125 1
⁄4 x 1⁄8 4 1⁄8 0332-00611*
** Nominal + .002 * Manufactured to order

Splined Weld-Ons

Description Part Number

1 1
1 ⁄8-6 Spline, 5 ⁄4 Long 0332-00358
1 3⁄8-6 Spline, 5 1⁄2 Long 0332-00359
1 3⁄8-21 Spline, 5 1⁄2 Long 0332-00019

Q
Q
Quick Release Weld-Ons
See usage safety warning on page Q4

Description Part Number

1 3⁄8-21 Spline, 3 5⁄16 Long 0332-01350*
1 3⁄8-6 Spline, 3 5⁄16 Long 0332-01345

* Manufactured to order

Certified prints are available upon request

CALL: (605) 225-0360 • FAX: (605) 225-0567 Q-9

 FARM PRODUCTS AND ACCESSORIES

FOR USER/OPERATOR SAFETY SEE

P.T.O. Products DETAILS PAGE Q-4

Over-Running Couplers
HUB CITY Over-Running Couplers provide a safe way to the driven machine and eliminate the chance of broken
protect operators and machinery where inertia of driven or twisted P.T.O. shafts. Over-Running Couplers drive
units: e.g. rotary mowers, balers, hay conditioners, etc. solidly from tractor to driven implement, but over-run
can over-run driving source. They take the push out of smoothly when implement exceeds P.T.O. speeds.

Kwik-D-Tach Tractor Models – to 125 HP

n Patent applied for – pending serial No. U.S. 465 641 – Canadian 1 117 114
n Capacity to operate on tractors to 125 P.T.O. HP
n New P.T.O. Quick Release Concept – Spring Loaded – rotates about 30° by
hand for quick release
n Designed to operate with 1000 RPM P.T.O.’s
n Installation and lubrication instructions enclosed with each coupler
See usage safety warning on page Q4

Female Male Length Extends Tractor P.T.O. Part

Spline Spline (Inches) Shaft End Shaft Retaining Groove Number
1 3⁄8-6 1 3⁄8-6 7 5⁄16 4 3⁄16 5 3⁄16 0331-00010
3 3 3 11
1 ⁄8-6 1 ⁄8-21 7 ⁄16 4 ⁄16 5 3⁄16 0331-00011
1 3⁄8-21 1 3⁄8-6 7 5⁄16 5 5⁄16 5 3⁄16 0331-00012
1 3⁄8-21 1 3⁄8-21 7 3⁄16 5 3⁄16 5 3⁄16 0331-00013
Repair Kit 0337-00126

Tractor Models – to 75 HP
Over-Running Couplers covered by Patent No. 3,233,471 – Canadian Patent No. 727-982
n All steel welded housing
n Heat treated alloy steel inner sleeve
n Hardened steel keys, spring loaded
n Snap ring construction for quick, easy disassembly for cleaning and service
Shipping Wgt. 6 lbs.
n Spring roll pin for quick mounting to tractor
n Convenient grease fitting for gun lubrication
n Designed to operate with 1000 RPM P.T.O.’s

See usage safety warning on page Q4

Extends Tractor P.T.O.

Female Male Length Shaft Shaft Retaining Fits Part
Spline Spline (Inches) End Groove Tractor Number
1 1⁄8-6 1 1⁄8-6 6 21
⁄32 4 5⁄32 4 1⁄32 All with Cross Pin Hole Including Ford 0331-00690
1 3 21 5
1 ⁄8-6 1 ⁄8-6 6 ⁄32 4 ⁄32 4 1⁄32 All with Cross Pin Hole Including Ford 0331-00670
1 3⁄8-6 1 1⁄8-6 6 21
⁄32 4 5⁄32 4 1⁄32 All with Cross Pin Hole Including Ford 0331-00680
1 3⁄8-6 1 3⁄8-6 6 21
⁄32 4 5⁄32 4 1⁄32 All with Cross Pin Hole Including Ford 0331-00660

Repair Kit 0337-00076

Installation and lubrication instructions enclosed with each coupler.

For Non-PTO Over-running Couplers, refer to page Q15.

Certified prints are available upon request

Q-10 CALL: (605) 225-0360 • FAX: (605) 225-0567

 FARM PRODUCTS AND ACCESSORIES

FOR USER/OPERATOR SAFETY SEE

Non P.T.O. Products

DETAILS PAGE Q-11

Non P.T.O. Product Safety

WARNING

For safety, purchaser or user must provide protective Buyer shall be solely responsible for determining the
guards over all rotating shafts and any moving apparatus adequacy of this product for any and all uses to which
mounted thereon. The user is responsible for checking all the buyer shall apply this product. The application by
applicable safety codes in his area and for the equipment the buyer shall not be subject to any implied warranty of
utilizing this component, and providing suitable guards. fitness for a particular purpose. The purchaser/user of
this component accepts responsibility for the above
issues when removing the safety warning label from the
component.

DO NOT OPERATE WITHOUT PROPER GUARDS. FAILURE TO GUARD CAN RESULT IN

SERIOUS INJURY OR DEATH AND DAMAGE TO THE EQUIPMENT.

Non P.T.O. Products

Square Bushing Weld-Ons

I.D. O.D. Length (Inches) Part Number

7
⁄8 & 1 Square 1 3⁄4 2 1⁄4 0332-00360
1 1⁄8 Square 2 2 1⁄2 0332-00362
1 1⁄4 Square 2 1⁄4 2 1⁄2 0332-00364

Sprocket Repair Hub for Transit-Mixer

No. of Spline Spline Shoulder Pilot Pilot O.A. Part

Q
Q
Splines Description O.D. O.D. O.D. Length Length Number
23 8/16 INV. 3 4 1⁄2 4 1 15
⁄32 3 5⁄64 0332-00045

Certified prints are available upon request

CALL: (605) 225-0360 • FAX: (605) 225-0567 Q-11

 FARM PRODUCTS AND ACCESSORIES

FOR USER/OPERATOR SAFETY SEE

Non P.T.O. Products DETAILS PAGE Q-11

Splined Couplings
Splined Size O.D. Length (inches) Part Number
3 3 1
⁄4-6 1 ⁄8 2 ⁄2 0332-00336
7
⁄8-6 1 3⁄8 2 1⁄2 0332-00337
31
⁄32-10 1 3⁄8 2 3⁄4 0332-00340
(IHC CUB & KUBOTA)
1-10 1 3⁄8 2 1⁄2 0332-00338
3
1-6 1 ⁄8 2 3⁄4 0332-00341
1 1⁄8-6 1 9⁄16 2 3⁄4 0332-00344
1 1⁄4-6 1 7⁄8 3 1⁄4 0332-00342
1 1⁄4-10 1 3⁄4 3 3⁄4 0332-00348
1 3⁄8-6 1 3⁄4 3 3⁄4 0332-00345
1 3⁄8-10 1 3⁄4 3 0332-00365
1 1⁄2-6 1 7⁄8 3 3⁄4 0332-00347
1 1⁄2-10 1 7⁄8 3 0332-00367
5
1 ⁄8-6 2 3 3⁄4 0332-00349
1 3⁄4-6 2 1⁄4 3 3⁄4 0332-00346

Involute Splined Couplings

No. of Spline Spline Coupling Coupling Part
Splines Description O.D. O.D. Length Number
9 16/32 DP 30° PA .625 1 3⁄8 2 0332-00027
11 16/32 DP 30° PA .750 1 3⁄8 2 0332-00066
13 16/32 DP 30° PA .875 1 3⁄8 3 0332-00028
15 16/32 DP 30° PA 1.000 1 1⁄2 3 0332-00043
14 12/24 DP 30° PA 1.250 1 3⁄4 3 0332-00029
21 16/32 DP 30° PA 1.375 1 3⁄4 3 0332-00350
20 12/24 DP 30° PA 1.750 2 1⁄4 3 3⁄4 0332-00320
13 8/16 DP 30° PA 1.750 2 1⁄4 3 3⁄4 0332-00030
27 16/32 DP 30° PA 1.750 2 1⁄4 3 0332-00351

Hydraulic Reducer Bushings

Male Female Part
A B C
Spline Spline Number
1 3⁄4 - 13T 5
⁄8 - 9T 1 3⁄8 1 7⁄32 1 5⁄16 23-01531
8/16 DP, 30° PA 16/32 DP, 30° PA
1 3⁄4 - 13T 7
⁄8 - 13T 1 3⁄8 1 7⁄32 1 5⁄16 23-01532
8/16 DP, 30° PA 16/32 DP, 30° PA
1 3⁄4 - 13T 1 1⁄4 - 14T 1 7⁄32 23-01533
N/A N/A
8/16 DP, 30° PA 12/24 DP, 30° PA
1 3⁄4 - 13T 1 - 15T 1 3⁄8 1 7⁄32 1 5⁄16 23-01558
8/16 DP, 30° PA 16/32 DP, 30° PA
1 1⁄4 - 14T .625 Round 1 1⁄8 0223-02150
5 5 N/A N/A
12/24 DP, 30° PA ⁄32 x ⁄64 KW
1 1⁄4 - 14T 5
⁄8 - 9T 1 1⁄8 0223-02149
N/A N/A
12/24 DP, 30° PA 16/32 DP, 30° PA
1 1⁄4 - 14T 7
⁄8 - 13T 1 1⁄8 0223-02148
N/A N/A
12/24 DP, 30° PA 16/32 DP, 30° PA

Certified prints are available upon request

Q-12 CALL: (605) 225-0360 • FAX: (605) 225-0567

 FARM PRODUCTS AND ACCESSORIES

FOR USER/OPERATOR SAFETY SEE

DETAILS PAGE Q-11
Non P.T.O. Products
Splined Shafts

Size Spline Length (inches) Part Number

1 6 10 0332-00390
1 1⁄8 6 10 0332-00391
1 1⁄4 6 10 0332-00392
1 1⁄4 10 10 0332-00393
1 3⁄8 6 10 0332-00394
1 1⁄2 6 10 0332-00396
1 5⁄8 6 10 0332-00397
1 3⁄4 6 10 0332-00398

Extension Shafts

Non P.T.O. Products

Spline Spline Length (inches) Part Number
3 3
1 ⁄8-6 1 ⁄8-6 9 0332-00356
1 3⁄8-6 1 1⁄8-6 9 0332-00357*
* Manufactured to order

Involute Splined Shafts

Q
Q
No. of Splines Spline Description Spline O.D. Shaft Length Part Number
9 16/32 DP 30° PA .625 6 0332-00023
13 16/32 DP 30° PA .875 6 0332-00024
15 16/32 DP 30° PA 1 8 0332-00044
14 12/24 DP 30° PA 1.25 10 0332-00025
21 16/32 DP 30° PA 1.375 10 0332-00395
26 20/40 DP 30° PA 1.358 10 0332-00414*
16 10/20 DP 30° PA 1.7 10 0332-00038*
13 8/16 DP 30° PA 1.75 10 0332-00026
27 16/32 DP 30° PA 1.75 10 0332-00399
34 20/40 DP 30° PA 1.750 10 0332-00415*
16 8/16 DP 30° PA 2.125 10 0332-00039
* Manufactured to order

Certified prints are available upon request

CALL: (605) 225-0360 • FAX: (605) 225-0567 Q-13

 FARM PRODUCTS AND ACCESSORIES

FOR USER/OPERATOR SAFETY SEE

Non P.T.O. Products DETAILS PAGE Q-11

Round Bore Couplings

n Use to join two shafts
n Repair pulleys, gears, sprockets, etc.
n O.D. and I.D. concentricity not held to close limits
n If precision O.D. and I.D. concentricity is required,
write for quotations
n Not drilled for setscrews
Bore Size Keyway O.D. Length(inches) Part Number
3 3 1 3
⁄4 ⁄16 1 ⁄2 2 ⁄4 0332-00380
7 3
⁄8 ⁄16 1 1⁄2 2 3⁄4 0332-00381
1
1 ⁄4 1 3⁄4 2 3⁄4 0332-00382
1 1⁄16 1
⁄4 1 3⁄4 2 3⁄4 0332-00383*
1 1⁄8 1
⁄4 2 3 0332-00384
3 1
1 ⁄16 ⁄4 2 3 0332-00385
1 1⁄4 1
⁄4 2 3 0332-00386
1 5⁄16 5
⁄16 2 3 0332-00387*
1 3⁄8 5
⁄16 2 1⁄8 3 0332-00388
7 3
1 ⁄16 ⁄8 2 1⁄8 3 0332-00389
1 1⁄2 3
⁄8 2 1⁄4 3 0332-00379
* Manufactured to order

Precision Splined Hubs

n Designed for hydraulic motors
n Made from low alloy, high carbon steel
n Close tolerance O.D. and I.D. concentricity permits
accurate mounting of sheave or sprocket
n Precision also permits accurate chucking for
additional mounting

No. of Splines Spline Description Spline O.D. Hub O.D. Length(inches) Part Number
3
6 6B Str. Side 1.000 2.001/2.000 1 ⁄4 0332-00031
18 1.25 Module 20° PA .984 1.751/1.750 1 3⁄4 0332-00085*
9 16/32 DP 30° PA .625 1.251/1.250 1 1⁄4 0332-00032
11 16/32 DP 30° PA .750 1.501/1.500 1 1⁄2 0332-00071
13 16/32 DP 30° PA .875 1.501/1.500 1 1⁄2 0332-00033
15 16/32 DP 30° PA 1.000 1.751/1.750 1 3⁄4 0332-00072
21 16/32 DP 30° PA 1.375 2.251/2.250 2 1⁄8 0332-00035
17 12/24 DP 30° PA 1.500 2.251/2.250 2 1⁄4 0332-00093
23 16/32 DP 30° PA 1.500 2.251/2.250 2 1⁄8 0332-00073
27 16/32 DP 30° PA 1.750 3.001/3.000 2 1⁄4 0332-00075
14 12/24 DP 30° PA 1.250 2.251/2.250 2 0332-00034
16 10/20 DP 30° PA 1.700 2.751/2.750 2 1⁄4 0332-00036
13 8/16 DP 30° PA 1.750 3.001/3.000 2 1⁄4 0332-00074
31
16 8/16 DP 30° PA 2.125 3.501/3.500 2 ⁄32 0332-00037

* Manufactured to order

Certified prints are available upon request

Q-14 CALL: (605) 225-0360 • FAX: (605) 225-0567

 FARM PRODUCTS AND ACCESSORIES

FOR USER/OPERATOR SAFETY SEE

DETAILS PAGE Q-11
Non P.T.O. Products
Utility Models – to 75 HP
n Same construction as Standard-Duty Tractor Models
n For those applications other than tractor P.T.O. shafts,
where the driven shaft overruns the driver occasionally
or where one shaft must override or idle part of the time.
n Operating Speed to 1000 RPM Shipping Wgt. 6 lbs.

Female Spline Male Extension Part Number

1 1⁄4 Rd., 1⁄4 KW 1 1⁄4 Rd., 1⁄4 KW 0331-00615

Repair Kit 0337-00076

Installation and lubrication instructions enclosed with each coupler

Universal Models– to 75 HP
n Same construction as Standard-Duty Tractor Models

Universal flange for mounting sheave or sprocket, has six

Non P.T.O. Products

n

3⁄8” holes equally spaced on 4 1⁄4” Bolt Circle.

Flange O.D. 5” – Hub O.D. 2 3⁄4”
n Operating Speed to 1000 RPM Shipping Wgt. 6 lbs.

Female Sleeve
I.D. Type Part Number
1 1
1 ⁄4 Round w/ ⁄4 keyway 0331-00600
1 3⁄8 Round w/5⁄16 keyway 0331-00607

Repair Kit 0337-00082

Manufactured to order. Consult factory for price and delivery.

Special Over-Running Models Q

Q
Send us details of your special requirements!
We can design and manufacture to your order.
Pictured to the right is a special unit with
sprocket welded to outer housing.

Certified prints are available upon request

CALL: (605) 225-0360 • FAX: (605) 225-0567 Q-15

 FARM PRODUCTS AND ACCESSORIES

FOR USER/OPERATOR SAFETY SEE

Non P.T.O. Products DETAILS PAGE Q-11

Stroke Control Segments for Hydraulic Cylinders

n Cast iron segments for durability
n Rigidly attached spring with contoured handle permits
installation and removal with one hand
n Universal: each segment assembly fits all shaft sizes
1 through 1 3⁄4 inches
n Large area parallel compression face of segments
distribute cylinder clamping load over a greater area of
the cylinder head and cylinder rod ends clevis to
minimize possible cylinder damage
n Attached spring reduces loss of segment halves
n Provides 1⁄4 inch adjustments from 1 through 6 1⁄2 inches
n Can be ordered by sets or segments

Segment Combinations

For For
Stroke Use Stroke Use
Reduction Segment Reduction Segment
(inches) (inches) (inches) (inches)
1 1 3 1⁄2 1, 1, 1 1⁄2
1 1 3
1 ⁄4 1 ⁄4 3 ⁄4 1, 1 1⁄4, 1 1⁄2
1 1
1 ⁄2 1 ⁄2 4 1, 1 1⁄4, 1 3⁄4
1 3⁄4 1 3⁄4 4 1⁄4 1, 1 1⁄2, 1 3⁄4
2 1, 1 4 1⁄2 1 1⁄4, 1 1⁄2, 1 3⁄4
1 1 3
2 ⁄4 1, 1 ⁄4 4 ⁄4 1, 1, 1 1⁄4, 1 1⁄2
1 1
2 ⁄2 1, 1 ⁄2 5 1, 1, 1 1⁄4, 1 3⁄4
2 3⁄4 1, 1 3⁄4 5 1⁄4 1, 1, 1 1⁄2, 1 3⁄4
3 1 1⁄4, 1 3⁄4 5 1⁄2 1, 1 1⁄4, 1 1⁄2, 1 3⁄4
1 1 3 1
3 ⁄4 1 ⁄2, 1 ⁄4 6 ⁄2 1, 1, 1 1⁄4, 1 1⁄2, 1 3⁄4

Set of 5 Segments Weight (lbs.) Part Number

7.7 0339-80000
Set Includes:
2 - 1 In. Segments 1.2 0339-80001
1 - 1 1⁄4 In. Segment 1.4 0339-80002
1 - 1 1⁄2 In. Segment 1.8 0339-80003
1 - 1 3⁄4 In. Segment 2.1 0339-80004

Certified prints are available upon request

Q-16 CALL: (605) 225-0360 • FAX: (605) 225-0567

 FARM PRODUCTS AND ACCESSORIES

FOR USER/OPERATOR SAFETY SEE

DETAILS PAGE Q-11
Non P.T.O. Products
Over-Hung Load Adaptor for Orbit Motors
Specifically designed to direct connect with the orbit motor and provide substantially greater capacity for sprockets,
sheaves, etc.
n Tapered Roller Bearings
n Grease Seals
n Lubricated for Life
n Two (2) Shaft Sizes
n Maximum O.H.L. Capacity

Dimensions for Char-Lynn Orbit Motors

Non P.T.O. Products

Dimensions for S.A.E. “A” 2-Hole Orbit Motors

Q
Q

Item Shaft Dia. A Part Number Wgt. Each

CHAR-LYNN MOTORS 1.000/.998 0334-00028 9 lbs.
CHAR-LYNN MOTORS 1.250/1.248 0334-00035 9 lbs.
S.A.E. 2-HOLE MOTORS 1.000/.998 0334-00042 11 lbs.
S.A.E. 2-HOLE MOTORS 1.250/1.248 0334-00043 11 lbs.
Extreme over-hung loads will require the larger diameter shaft

Certified prints are available upon request

CALL: (605) 225-0360 • FAX: (605) 225-0567 Q-17

 FARM PRODUCTS AND ACCESSORIES

FOR USER/OPERATOR SAFETY SEE

Model 330 Pump Drive DETAILS PAGE Q-4

n Two standard ratios available

n Increases 540 or 1000 RPM tractor P.T.O. speed to 1825
RPM to facilitate use of a smaller, less expensive
hydraulic pump
n Fits most standard SAE hydraulic pumps having
SAE B or C mounting flange
n Easy installation and removal on most standard tractor
P.T.O. shafts
n Torque arm bracket furnished as standard equipment
n Rugged cast aluminum housing
n All steel alloy gears
n High strength alloy shafts
n Off-the-shelf delivery
n Rated for pumps requiring up to 45 HP at 540 RPM and
65 HP at 1000 RPM

Weight 35 lbs.

With the new HUB CITY Series 330 Pump Drive, it is now possible to increase either 540 RPM or 1000 RPM tractor
P.T.O. speed to 1825 RPM to permit use of a similar, less expensive hydraulic pump for your implements.

Two flange sizes are available: SAE B and C, for use with standard SAE pumps.

Also, both spline and round shafts are available in several sizes to suit your pump adaptation requirements.

Certified prints are available upon request

Q-18 CALL: (605) 225-0360 • FAX: (605) 225-0567

 FARM PRODUCTS AND ACCESSORIES

FOR USER/OPERATOR SAFETY SEE

DETAILS PAGE Q-4
Model 330 Pump Drive

Dimensions

Specifications

Pump Sleeve Operating Speed

Part SAE
Number Spline or
Number Adaptor Spline/Keyway Tractor* Pump
Splines Bore I.D.
3
0220-06110 B Keyway ⁄16 x 3⁄32 KW .875 540 RPM 1825 RPM
1
⁄4 x 1⁄8 KW
1
0220-06104 B Keyway ⁄4 x 1⁄8 KW .875 1000 RPM 1825 RPM
0220-06109 B 13 16/32 DP 30° PA .875 540 RPM 1825 RPM
0220-06103 B 13 16/32 DP 30° PA .875 1000 RPM 1825 RPM
0220-06117 B 14 12/24 DP 30° PA 1.250 540 RPM 1825 RPM
5
0220-06112 C Keyway ⁄16 x 5⁄32 KW 1.250 540 RPM 1825 RPM
5
0220-06106 C Keyway ⁄16 x 5⁄32 KW 1.250 1000 RPM 1825 RPM
0220-06111 C 14 12/24 DP 30° PA 1.250 540 RPM 1825 RPM

Q
Q
0220-06105 C 14 12/24 DP 30° PA 1.250 1000 RPM 1825 RPM

* Input designed for 1 3/8 P.T.O. shaft only

540 RPM tractor 1 3/8 - 6 spline

1000 RPM tractor 1 3/8 - 21 spline

FOR LUBRICATION AND INSTALLATION

INSTRUCTIONS REFER TO SECTION R.

Certified prints are available upon request

CALL: (605) 225-0360 • FAX: (605) 225-0567 Q-19

 FARM PRODUCTS AND ACCESSORIES

FOR USER/OPERATOR SAFETY SEE

Model 390 P.T.O. Speed Changer DETAILS PAGE Q-4

Adapts up to 125 HP tractor to all P.T.O. operated field equipment

n Unit takes input horsepower up to 125 @ 1000 rpm!

n Alloy steel, heat treated gears don’t shy away from jolts and shock loads
n Rugged, cast iron housing protects the unit for long, trouble free service
n Tapered roller bearings give quiet performance and long life
n Double lip, spring loaded seals keep lubricant where it belongs
n Alloy shaft and spline sleeve add to strength and dependability
n Unit minimizes P.T.O. shaft overhung load and drive line angularity
n Minimum offset between tractor P.T.O. and speed changer extension
minimizes drive line adjustment
n Easily installed and removed
n Two (2) ratios to fit most applications
n Safety shield included
n Permanently lubricated at factory

Assembly No. 0220-06206-390 0220-06207-390 0220-06208-390

Ratio 1.89:1 Reducer 1:1.89 Increaser 1.89:1 Reducer

Tractor RPM 1000 540 1000
Drive Line RPM 540 1000 540
Female Spline 1 3⁄8-21 Inv. 1 3⁄8-6B 1 3⁄4-20 Inv.
Male Spline 1 3⁄8-6B 1 3⁄8-21 Inv. 1 3⁄8-6B
C.D. Center Distance 1.60 1.60 1.60
A 8 1⁄8 7 5⁄8 8 11
⁄32
1 1
B 9 ⁄2 9 ⁄2 9 1⁄2
FOR LUBRICATION AND INSTALLATION
C 5 3⁄4 5 3⁄4 5 3⁄4
1 1 1
INSTRUCTIONS REFER TO SECTION R.
D 11 ⁄8 11 ⁄8 11 ⁄8
E 4 1⁄4 3 9⁄16 4 1⁄4
5 15 31
F P.T.O. Ext. 11 ⁄8 10 ⁄16 10 ⁄32
G 14 5⁄8 13 15
⁄16 14 27
⁄32
H 10 3⁄8 9 3⁄8 10 19
⁄32
I 1 1⁄16 1 1 5⁄16
J 5 3⁄8 5 3⁄8 5 3⁄8
K 10 3⁄4 10 3⁄4 10 3⁄4
L 5 3⁄4 5 3⁄4 5 3⁄4
M 13 1⁄8 13 1⁄8 13 1⁄8
7 7
N 7 ⁄8 7 ⁄8 7 7⁄8
O 6 9⁄32 7 7⁄8 6 9⁄32

IMPORTANT: The Model 390 P.T.O. Speed Changers can be mounted on most tractor P.T.O. shafts, however, they cannot be mounted on
tractors that do not have detachable P.T.O. shields. Units must be used in an approved mounting position with the torque arm bracket
also in an approved position (see page 21) otherwise excessive side loading will be exerted on the tractor P.T.O. shaft. The torque arm must
always be positioned at 90° to the torque arm bracket. To determine if the Model 390 will mount on a specific tractor use the outline on
page 21 and the dimensions shown on this page.

Certified prints are available upon request

Q-20 CALL: (605) 225-0360 • FAX: (605) 225-0567

 FARM PRODUCTS AND ACCESSORIES

FOR USER/OPERATOR SAFETY SEE

DETAILS PAGE Q-4
Model 390 P.T.O. Speed Changer
Approved Mounting Positions

FIG. SC1 FIG. SC2

FIG. SC3 FIG. SC4

FIG. SC5 FIG. SC6

Approved Torque Arm Bracket Positions

Q
Q
FIG. SC9 FIG. SC10 FIG. SC11

Certified prints are available upon request

FIG. SC7 FIG. SC8
CALL: (605) 225-0360 • FAX: (605) 225-0567 Q-21
 FARM PRODUCTS AND ACCESSORIES

Shipping Weights & Index

Part Number Wt.(lbs.) Page Part Number Wt.(lbs.) Page Part Number Wt.(lbs.) Page
02-20-06206-390 110 Q-20 03-32-00043 0.8 Q-12 03-32-00391 2.3 Q-13
02-20-06207-390 110 Q-20 03-32-00044 1.6 Q-13 03-32-00392 2.8 Q-13
02-20-06208-390 110 Q-20 03-32-00045 6.2 Q-11 03-32-00393 3 Q-13
02-20-06103-330 35 Q-19 03-32-00057 1.5 Q-8 03-32-00394 3.5 Q-13
02-20-06104-330 35 Q-19 03-32-00066 0.8 Q-12 03-32-00395 3.8 Q-13
02-20-06105-330 35 Q-19 03-32-00070 3.5 Q-6 03-32-00396 4.3 Q-13
02-20-06106-330 35 Q-19 03-32-00071 0.5 Q-14 03-32-00397 5.2 Q-13
02-20-06109-330 35 Q-19 03-32-00072 0.5 Q-14 03-32-00398 5.8 Q-13
02-20-06110-330 35 Q-19 03-32-00073 1.5 Q-14 03-32-00399 6.2 Q-13
02-20-06111-330 35 Q-19 03-32-00074 1.5 Q-14 03-32-00400 2.3 Q-6
02-20-06112-330 35 Q-19 03-32-00075 1.5 Q-14 03-32-00401 3.5 Q-6
02-20-06117-330 35 Q-19 03-32-00084 1.5 Q-6 03-32-00403 0.5 Q-8
02-23-02148-330 0.5 Q-12 03-32-00085 1.2 Q-14 03-32-00407 1.5 Q-9
02-23-02149-330 0.5 Q-12 03-32-00086 0.5 Q-7 03-32-00408 1.5 Q-9
02-23-02150-330 0.5 Q-12 03-32-00087 1.5 Q-8 03-32-00409 1.5 Q-9
23-01531 0.5 Q-12 03-32-00092 2.5 Q-8 03-32-00410 1.3 Q-9
23-01532 0.5 Q-12 03-32-00093 2 Q-14 03-32-00411 1.3 Q-9
23-01533 0.5 Q-12 03-32-00094 6 Q-6 03-32-00412 1.5 Q-9
23-01558 0.5 Q-12 03-32-00320 2 Q-12 03-32-00413 1.5 Q-9
03-31-00010 7.5 Q-10 03-32-00336 1 Q-12 03-32-00414 1.5 Q-13
03-31-00011 7.5 Q-10 03-32-00337 0.8 Q-12 03-32-00415 1.5 Q-13
03-31-00012 7.5 Q-10 03-32-00338 0.8 Q-12 03-32-00420 1.8 Q-6
03-31-00013 7.5 Q-10 03-32-00340 0.8 Q-12 03-32-00430 1.8 Q-8
03-31-00600 6 Q-15 03-32-00341 0.8 Q-12 03-32-00431 1.8 Q-8
03-31-00607 6 Q-15 03-32-00342 1.5 Q-12 03-32-00432 1.8 Q-8
03-31-00615 6 Q-15 03-32-00344 0.8 Q-12 03-32-00433 1.8 Q-8
03-31-00660 6 Q-10 03-32-00345 1 Q-12 03-32-00607 1.5 Q-9
03-31-00670 6 Q-10 03-32-00346 1.8 Q-12 03-32-00608 1.5 Q-9
03-31-00680 6 Q-10 03-32-00347 1.3 Q-12 03-32-00610 1.3 Q-9
03-31-00690 6 Q-10 03-32-00348 1.3 Q-12 03-32-00611 1.5 Q-9
03-32-00001 6 Q-6 03-32-00349 1.3 Q-12 03-32-00612 1.5 Q-9
03-32-00002 6 Q-6 03-32-00350 1 Q-12 03-32-01345 1.3 Q-9
03-32-00004 6 Q-6 03-32-00351 1.5 Q-12 03-32-01350 1.3 Q-9
03-32-00005 6 Q-6 03-32-00352 0.3 Q-8 03-32-01354 1.5 Q-8
03-32-00010 2.3 Q-7 03-32-00355 0.5 Q-8 03-32-01373 2.5 Q-7
03-32-00011 2 Q-9 03-32-00356 3.3 Q-13 03-32-01375 2.5 Q-8
03-32-00012 2 Q-9 03-32-00357 3 Q-13 03-32-01476 7 Q-7
03-32-00013 2 Q-7 03-32-00358 1.5 Q-9 03-32-01477 7 Q-7
03-32-00014 2 Q-9 03-32-00359 2.3 Q-9 03-32-01490 7 Q-7
03-32-00015 2 Q-7 03-32-00360 1 Q-11 03-32-01491 7 Q-7
03-32-00016 1.8 Q-9 03-32-00362 1.3 Q-11 03-32-02121 2.5 Q-7
03-32-00017 1.8 Q-9 03-32-00363 0.3 Q-8 03-32-03531 1.8 Q-6
03-32-00018 0.8 Q-8 03-32-00364 1.5 Q-11 03-34-00028 9 Q-17
03-32-00019 2.3 Q-9 03-32-00365 1 Q-12 03-34-00035 9 Q-17
03-32-00023 0.5 Q-13 03-32-00367 1.3 Q-12 03-34-00042 11 Q-17
03-32-00024 0.8 Q-13 03-32-00371 2.5 Q-6 03-34-00043 11 Q-17
03-32-00025 3 Q-13 03-32-00373 2.8 Q-6 0335-90120 0.5 Q-8
03-32-00026 5.8 Q-13 03-32-00376 1.8 Q-8 0336-00182 0.5 Q-8
03-32-00027 0.8 Q-12 03-32-00377 1.8 Q-6 03-37-00076 0.8 Q-10&Q-15
03-32-00028 0.8 Q-12 03-32-00378 1.8 Q-6 03-37-00082 0.8 Q-15
03-32-00029 1 Q-12 03-32-00379 1.8 Q-14 03-37-00126 0.5 Q-10
03-32-00030 2 Q-12 03-32-00380 1 Q-14 03-39-80000 7.7 Q-16
03-32-00031 1.2 Q-14 03-32-00381 1 Q-14 03-39-80001 1.2 Q-16
03-32-00032 0.3 Q-14 03-32-00382 1.3 Q-14 03-39-80002 1.4 Q-16
03-32-00033 0.5 Q-14 03-32-00383 1.3 Q-14 03-39-80003 1.8 Q-16
03-32-00034 1.5 Q-14 03-32-00384 1.8 Q-14 03-39-80004 2 Q-16
03-32-00035 2 Q-14 03-32-00385 1.8 Q-14 8-58-00-01-009 2 R-28 & R-29
03-32-00036 2.5 Q-14 03-32-00386 1.5 Q-14 8-58-00-01-011 2 R-28 & R-29
03-32-00037 5.2 Q-14 03-32-00387 1.5 Q-14 8-58-00-01-024 2 R-28 & R-29
03-32-00038 6.2 Q-13 03-32-00388 1.8 Q-14 8-58-00-01-031 2 R-28 & R-29
03-32-00039 9 Q-13 03-32-00389 1.5 Q-14
03-32-00040 2 Q-9 03-32-00390 1.3 Q-13

Q-22 CALL: (605) 225-0360 • FAX: (605) 225-0567